Bonney Forge- Forged Stl. Fittings and Unions

20
FORGED STEEL FITTINGS & UNIONS

Transcript of Bonney Forge- Forged Stl. Fittings and Unions

Page 1: Bonney Forge- Forged Stl. Fittings and Unions

Forged Steel FittingS & UnionS

Page 2: Bonney Forge- Forged Stl. Fittings and Unions

Forged Steel FittingS & UnionS

Page 3: Bonney Forge- Forged Stl. Fittings and Unions

SaleS Center/WarehouSe 14496 Croghan Pike

P.o. Box 330 Mt. union, Pa 17066

(814) 542-2545 • (800) 231-0655 (800) 345-7546 • Fax (814) 542-9977

www.bonneyforge.come-mail: [email protected]

Table Of COnTenTs

Corporate overview ................................................................................ 2, 3

Condensed Description ........................................................................... 4, 5

Socket Weld Fittings- Class 3000 & 6000 ................................................... 6

Socket Weld Fittings- Class 9000 ............................................................... 7

Threaded Fittings- Class 2000, 3000 & 6000 .............................................. 8

Quikleg90tM .............................................................................................. 9

Socket Weld Couplings, Reducers & Caps- Class 3000 & 6000 ................ 10

Threaded Couplings, Reducers & Caps- Class 3000 & 6000 ..................... 11

Socket Weld Reducer Inserts- Class 3000, 6000 & 9000 .......................... 12

Threaded Plugs & Bushings ..................................................................... 13

MSS-SP-83 unions .................................................................................. 14

rockwood unions .................................................................................... 15

lug nut unions ........................................................................................ 16

Page 4: Bonney Forge- Forged Stl. Fittings and Unions

SaleS Center/WarehouSe 14496 Croghan Pike

P.o. Box 330 Mt. union, Pa 17066

(814) 542-2545 • (800) 231-0655 (800) 345-7546 • Fax (814) 542-9977

www.bonneyforge.come-mail: [email protected]

Table Of COnTenTs

Corporate overview ................................................................................ 2, 3

Condensed Description ........................................................................... 4, 5

Socket Weld Fittings- Class 3000 & 6000 ................................................... 6

Socket Weld Fittings- Class 9000 ............................................................... 7

Threaded Fittings- Class 2000, 3000 & 6000 .............................................. 8

Quikleg90tM .............................................................................................. 9

Socket Weld Couplings, Reducers & Caps- Class 3000 & 6000 ................ 10

Threaded Couplings, Reducers & Caps- Class 3000 & 6000 ..................... 11

Socket Weld Reducer Inserts- Class 3000, 6000 & 9000 .......................... 12

Threaded Plugs & Bushings ..................................................................... 13

MSS-SP-83 unions .................................................................................. 14

rockwood unions .................................................................................... 15

lug nut unions ........................................................................................ 16

Page 5: Bonney Forge- Forged Stl. Fittings and Unions

2

Bonney Forge – The Company You Depend on for Forged Steel Fittings & UnionsFor over 40 years, one name has been synonymous with the highest quality forged steel fittings and unions– Bonney Forge.

our continued investments in technol-ogy helps maintain a consistency in product unparalleled in the industry. State-of-the-art machining centers have reduced product variability while increasing product serviceability.

Backed by the most comprehensive product line in the industry and an extensive inventory that makes all our products readily available, Bonney Forge is the number one resource for the power, oil, chemical, marine and construction industries through-out the world.

Dependable, Durable, Uniform and Accurateour unparalleled, integrated, state- of-the-art manufacturing facility allows Bonney Forge to develop products at the highest volume, all displaying the same consistent unbending quality.

The tight control we maintain over our manufacturing process has earned Bonney Forge ISo-9001 designation.

Additionally, products are inspected to the requirements of ASMe B16.11 and MSS-SP-83.

All The Fittings You Needour fittings and unions come in a variety of classes and material grades for any application. Socket Weld fittings are available in class 3000, 6000 and 9000. Threaded fittings are available in class 2000, 3000 and 6000.

Threaded couplings, reducers, half couplings and caps are available in

class 3000 and 6000. Socket Weld couplings, reducers, half couplings and reducer inserts are available in class 3000, 6000 and 9000.

other specialty designed products are available upon request.

The most recent addition to our product line is the QuikLeg90TM, an innovative new fitting, for constructing horizontal and vertical deadleg supports, that dramatically cuts construction costs.

This catalog lists for your convenience the complete line of Bonney Forge steel

A Fitting ConClusion to Your needs

3

fittings and unions including:

Forged Steel Fittings MSS-SP-83 Unions rockwood Unions Lug nut Unions QuikLeg90TM

For more information on these products or to learn about the complete Bonney Forge line, visit our website at www.bonneyforge.com or contact our knowledgeable customer service personnel at 1-800-231-0655.

Page 6: Bonney Forge- Forged Stl. Fittings and Unions

2

Bonney Forge – The Company You Depend on for Forged Steel Fittings & UnionsFor over 40 years, one name has been synonymous with the highest quality forged steel fittings and unions– Bonney Forge.

our continued investments in technol-ogy helps maintain a consistency in product unparalleled in the industry. State-of-the-art machining centers have reduced product variability while increasing product serviceability.

Backed by the most comprehensive product line in the industry and an extensive inventory that makes all our products readily available, Bonney Forge is the number one resource for the power, oil, chemical, marine and construction industries through-out the world.

Dependable, Durable, Uniform and Accurateour unparalleled, integrated, state- of-the-art manufacturing facility allows Bonney Forge to develop products at the highest volume, all displaying the same consistent unbending quality.

The tight control we maintain over our manufacturing process has earned Bonney Forge ISo-9001 designation.

Additionally, products are inspected to the requirements of ASMe B16.11 and MSS-SP-83.

All The Fittings You Needour fittings and unions come in a variety of classes and material grades for any application. Socket Weld fittings are available in class 3000, 6000 and 9000. Threaded fittings are available in class 2000, 3000 and 6000.

Threaded couplings, reducers, half couplings and caps are available in

class 3000 and 6000. Socket Weld couplings, reducers, half couplings and reducer inserts are available in class 3000, 6000 and 9000.

other specialty designed products are available upon request.

The most recent addition to our product line is the QuikLeg90TM, an innovative new fitting, for constructing horizontal and vertical deadleg supports, that dramatically cuts construction costs.

This catalog lists for your convenience the complete line of Bonney Forge steel

A Fitting ConClusion to Your needs

3

fittings and unions including:

Forged Steel Fittings MSS-SP-83 Unions rockwood Unions Lug nut Unions QuikLeg90TM

For more information on these products or to learn about the complete Bonney Forge line, visit our website at www.bonneyforge.com or contact our knowledgeable customer service personnel at 1-800-231-0655.

Page 7: Bonney Forge- Forged Stl. Fittings and Unions

5

COndensed desCripTiOn

COuplings, reduCers & Caps

reduCer inserTs

uniOns

Pipe Cap1/8" to 4" class 30001/8" to 2" class 6000 threaded & socket weld

Half Coupling1/8" to 4" class 3000 & 6000 threaded & socket weld1/2" to 2" class 9000 socket weld only

Coupling1/8" to 4" class 3000 & 6000 threaded & socket weld1/2" to 2" class 9000 socket weld only

Reducer1/8" to 4" class 3000 & 6000 threaded & socket weld1/2" to 2" class 9000 socket weld only

Type 1nominal pipe sizes from 1/4" x 1/8" to 2" x 1 1/2"

Type 2nominal pipe sizes from 1/2" x 1/4" to 2" x 1 1/4"

MSS-SP-83accomodates 1/8" to 3" pipe class 3000 and 1/8" to 2" pipe class 6000

RockwoodFor use with 1/8" to 2" pipe. 1/8" to 2" threaded connection. 1/8" to 2" socket weld-stainless steel only.

available in class 3000 and 6000. Special sizes and weights available on request.

Socket weld reducer inserts available in class 3000, 6000 and 9000. inserts stocked in various materials. Consult factory for special applications.

Bonney Forge MSS-SP-83 threaded and socket weld unions in class 3000 and 6000. Use Bonney Forge Rockwood Unions for the ultimate in operation and durability.

Lug Nut3/8" to 4" class 3000 threaded & socket weld

4

sOCkeT Weld/Threaded fiTTings

plugs & bushings

COndensed desCripTiOn

90° Elbow1/8" to 4" class 2000 threaded1/8" to 4" class 3000 threaded & socket weld1/8" to 4" class 6000 threaded1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

Tee1/8" to 4" class 2000 threaded1/8" to 4" class 3000 threaded & socket weld1/8" to 4" class 6000 threaded1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

45° Elbow1/8" to 4" class 2000 threaded1/8" to 4" class 3000 threaded & socket weld1/8" to 4" class 6000 threaded1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

Lateral1/4" to 2" class 3000 threaded1/4" to 2" class 3000 socket weld3/8" to 1 1/2" class 6000 threaded1/2" to 2" class 6000 socket weld1/2" to 1 1/2" class 9000 socket weld

Street Elbow1/8" to 2" class 3000 threaded1/4" to 1 1/2" class 6000 threaded

Cross1/8" to 4" class 2000, 3000 & 6000 threaded1/8" to 4" class 3000 socket weld1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

Round Head Plug1/8" to 4" nominal pipe sizes

Hexagon Plug1/8" to 4" nominal pipe sizes

Square Head Plug1/8" to 4" nominal pipe sizes

Hexagon Bushing1/8" to 4" nominal pipe sizes

Flush Bushing1/8" to 4" nominal pipe sizes

available in class 3000, 6000 and 9000 (high pressure) socket weld fittings; also, in class 2000, 3000 and 6000 threaded fittings.

QuikLeg90TM

3/4" to 2" class 3000 & 6000 socket weld1/2" to 1 1/2" class 9000 socket weld1/2" to 2" class 3000 threaded1/2" to 1 1/2" class 6000 threaded2" to 4" StD/xS butt weld

Page 8: Bonney Forge- Forged Stl. Fittings and Unions

5

COndensed desCripTiOn

COuplings, reduCers & Caps

reduCer inserTs

uniOns

Pipe Cap1/8" to 4" class 30001/8" to 2" class 6000 threaded & socket weld

Half Coupling1/8" to 4" class 3000 & 6000 threaded & socket weld1/2" to 2" class 9000 socket weld only

Coupling1/8" to 4" class 3000 & 6000 threaded & socket weld1/2" to 2" class 9000 socket weld only

Reducer1/8" to 4" class 3000 & 6000 threaded & socket weld1/2" to 2" class 9000 socket weld only

Type 1nominal pipe sizes from 1/4" x 1/8" to 2" x 1 1/2"

Type 2nominal pipe sizes from 1/2" x 1/4" to 2" x 1 1/4"

MSS-SP-83accomodates 1/8" to 3" pipe class 3000 and 1/8" to 2" pipe class 6000

RockwoodFor use with 1/8" to 2" pipe. 1/8" to 2" threaded connection. 1/8" to 2" socket weld-stainless steel only.

available in class 3000 and 6000. Special sizes and weights available on request.

Socket weld reducer inserts available in class 3000, 6000 and 9000. inserts stocked in various materials. Consult factory for special applications.

Bonney Forge MSS-SP-83 threaded and socket weld unions in class 3000 and 6000. Use Bonney Forge Rockwood Unions for the ultimate in operation and durability.

Lug Nut3/8" to 4" class 3000 threaded & socket weld

4

sOCkeT Weld/Threaded fiTTings

plugs & bushings

COndensed desCripTiOn

90° Elbow1/8" to 4" class 2000 threaded1/8" to 4" class 3000 threaded & socket weld1/8" to 4" class 6000 threaded1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

Tee1/8" to 4" class 2000 threaded1/8" to 4" class 3000 threaded & socket weld1/8" to 4" class 6000 threaded1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

45° Elbow1/8" to 4" class 2000 threaded1/8" to 4" class 3000 threaded & socket weld1/8" to 4" class 6000 threaded1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

Lateral1/4" to 2" class 3000 threaded1/4" to 2" class 3000 socket weld3/8" to 1 1/2" class 6000 threaded1/2" to 2" class 6000 socket weld1/2" to 1 1/2" class 9000 socket weld

Street Elbow1/8" to 2" class 3000 threaded1/4" to 1 1/2" class 6000 threaded

Cross1/8" to 4" class 2000, 3000 & 6000 threaded1/8" to 4" class 3000 socket weld1/8" to 4" class 6000 socket weld1/2" to 2" class 9000 socket weld

Round Head Plug1/8" to 4" nominal pipe sizes

Hexagon Plug1/8" to 4" nominal pipe sizes

Square Head Plug1/8" to 4" nominal pipe sizes

Hexagon Bushing1/8" to 4" nominal pipe sizes

Flush Bushing1/8" to 4" nominal pipe sizes

available in class 3000, 6000 and 9000 (high pressure) socket weld fittings; also, in class 2000, 3000 and 6000 threaded fittings.

QuikLeg90TM

3/4" to 2" class 3000 & 6000 socket weld1/2" to 1 1/2" class 9000 socket weld1/2" to 2" class 3000 threaded1/2" to 1 1/2" class 6000 threaded2" to 4" StD/xS butt weld

Page 9: Bonney Forge- Forged Stl. Fittings and Unions

6

Class 3000Class 6000

sOCkeT Weld fiTTings

ClAS

S 30

00- S

ched

ule

40 B

ore

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

90EL TEE a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16 LAT B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4 (Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

45EL a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2 CROSS B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6 (Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

e 7/16 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 5/8 F 3/4 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8 g 5/16 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 5/8

k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16

DimeNSioNS (inches)

DimeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545

all fittings)

WeighT (pounds)

90° elBoW .125 .183 .270 .460 .698 .987 1.480 2.088 3.125 6.340 10.867 25.00 45° elBoW .125 .198 .210 .440 .673 .935 1.365 1.63 2.71 6.75 10.50 18.188 tee .25 .25 .345 .540 .925 1.307 2.00 2.640 4.070 8.75 12.50 27.80 Street elBoW .25 .25 .375 .50 .875 1.438 2.25 3.00 5.188 lateral .25 .625 1.00 1.500 2.375 3.75 4.125 6.285 CroSS .25 .25 .375 .813 1.125 1.550 2.25 3.063 5.125 18.00 23.00 40.00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 (Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

e 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 1/2 2 3/4 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 g 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 3/8 1 5/8

k 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5 l 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

DimeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545

all fittings)

WeighT (pounds)

90° elBoW .938 1.440 2.348 3.188 5.25 6.660 11.875 19.25 32.70 45° elBoW .875 1.313 1.913 2.27 4.313 4.813 9.625 14.25 27.25 tee 1.375 2.00 3.313 3.75 7.480 8.240 16.625 23.50 33.00 Street elBoW .375 .438 1.00 1.625 2.50 3.688 6.438 lateral 2.00 3.063 5.125 6.25 11.938 12.5 CroSS 1.50 2.50 3.460 5.25 8.75 9.438 20.25 27.00 39.00

DimeNSioNS (inches)

ClAS

S 60

00- S

ched

ule

160

Bore

7

Class 9000

sOCkeT Weld fiTTings

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16 (Min.) D 3/8 1/2 1/2 1/2 1/2 5/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

DimeNSioNS (inches)

WeighT (pounds) Weight 1.44 2.25 3.19 5.25 6.69 6.69

ClASS 9000 XXS Bore- 90° elBoW

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16 (Min.) D 3/8 1/2 1/2 1/2 1/2 5/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

WeighT (pounds) Weight 2.00 3.31 3.75 6.50 7.88 8.75

ClASS 9000 XXS Bore- TeeDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 B 1 27/32 2 7/32 2 1/2 3 1/32 3 3/8 4 (Min.) D 5/8 9/16 9/16 13/16 3/4 15/16 F 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16

g 5/8 3/4 13/16 7/8 1 1 1/8

DimeNSioNS (inches)

WeighT (pounds) Weight 1.31 2.06 2.50 4.31 4.81 9.62

ClASS 9000 XXS Bore- 45° elBoW

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 (Min.) D 9/16 5/8 11/16 7/8 7/8 k 3 3 1/2 3 15/16 4 3/4 5

l 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (pounds) Weight 1.75 2.38 3.75 6.88 6.88

ClASS 9000 XXS Bore- lATerAlDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 (Min.) D 1/2 5/8 3/4 1 1 1 1/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

DimeNSioNS (inches)

WeighT (pounds) Weight 2.50 4.12 4.12 5.12 9.44 22.19

ClASS 9000 XXS Bore- CroSS

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 B 1 13/16 2 2 3/8 2 3/4 3 1/16 3 5/8 (Min.) D 1/2 9/16 5/8 11/16 3/4 7/8

e 3/8 3/8 1/2 1/2 1/2 3/4 F

WeighT (pounds) Coupling .75 1.06 1.69 2.22 2.81 4.66 Reducer .75 1.06 1.69 2.22 2.81 4.66 Half Coupling .88 1.16 1.88 2.50 3.25 5.38

ClASS 9000 XXS Bore- CoUPliNgS- reDUCerS- hAlF CoUPliNg

DimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 C .855 1.065 1.330 1.675 1.915 2.406

DimeNSioNS C - CommoN To All FiTTiNgS (inches)

Page 10: Bonney Forge- Forged Stl. Fittings and Unions

6

Class 3000Class 6000

sOCkeT Weld fiTTings

ClAS

S 30

00- S

ched

ule

40 B

ore

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

90EL TEE a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16 LAT B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4 (Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

45EL a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2 CROSS B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6 (Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

e 7/16 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 5/8 F 3/4 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8 g 5/16 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 5/8

k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16

DimeNSioNS (inches)

DimeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545

all fittings)

WeighT (pounds)

90° elBoW .125 .183 .270 .460 .698 .987 1.480 2.088 3.125 6.340 10.867 25.00 45° elBoW .125 .198 .210 .440 .673 .935 1.365 1.63 2.71 6.75 10.50 18.188 tee .25 .25 .345 .540 .925 1.307 2.00 2.640 4.070 8.75 12.50 27.80 Street elBoW .25 .25 .375 .50 .875 1.438 2.25 3.00 5.188 lateral .25 .625 1.00 1.500 2.375 3.75 4.125 6.285 CroSS .25 .25 .375 .813 1.125 1.550 2.25 3.063 5.125 18.00 23.00 40.00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 (Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

e 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 1/2 2 3/4 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 g 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 3/8 1 5/8

k 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5 l 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

DimeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545

all fittings)

WeighT (pounds)

90° elBoW .938 1.440 2.348 3.188 5.25 6.660 11.875 19.25 32.70 45° elBoW .875 1.313 1.913 2.27 4.313 4.813 9.625 14.25 27.25 tee 1.375 2.00 3.313 3.75 7.480 8.240 16.625 23.50 33.00 Street elBoW .375 .438 1.00 1.625 2.50 3.688 6.438 lateral 2.00 3.063 5.125 6.25 11.938 12.5 CroSS 1.50 2.50 3.460 5.25 8.75 9.438 20.25 27.00 39.00

DimeNSioNS (inches)

ClAS

S 60

00- S

ched

ule

160

Bore

7

Class 9000

sOCkeT Weld fiTTings

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16 (Min.) D 3/8 1/2 1/2 1/2 1/2 5/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

DimeNSioNS (inches)

WeighT (pounds) Weight 1.44 2.25 3.19 5.25 6.69 6.69

ClASS 9000 XXS Bore- 90° elBoW

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16 (Min.) D 3/8 1/2 1/2 1/2 1/2 5/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

WeighT (pounds) Weight 2.00 3.31 3.75 6.50 7.88 8.75

ClASS 9000 XXS Bore- TeeDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 B 1 27/32 2 7/32 2 1/2 3 1/32 3 3/8 4 (Min.) D 5/8 9/16 9/16 13/16 3/4 15/16 F 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16

g 5/8 3/4 13/16 7/8 1 1 1/8

DimeNSioNS (inches)

WeighT (pounds) Weight 1.31 2.06 2.50 4.31 4.81 9.62

ClASS 9000 XXS Bore- 45° elBoW

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 (Min.) D 9/16 5/8 11/16 7/8 7/8 k 3 3 1/2 3 15/16 4 3/4 5

l 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (pounds) Weight 1.75 2.38 3.75 6.88 6.88

ClASS 9000 XXS Bore- lATerAlDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 (Min.) D 1/2 5/8 3/4 1 1 1 1/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

DimeNSioNS (inches)

WeighT (pounds) Weight 2.50 4.12 4.12 5.12 9.44 22.19

ClASS 9000 XXS Bore- CroSS

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 a 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 B 1 13/16 2 2 3/8 2 3/4 3 1/16 3 5/8 (Min.) D 1/2 9/16 5/8 11/16 3/4 7/8

e 3/8 3/8 1/2 1/2 1/2 3/4 F

WeighT (pounds) Coupling .75 1.06 1.69 2.22 2.81 4.66 Reducer .75 1.06 1.69 2.22 2.81 4.66 Half Coupling .88 1.16 1.88 2.50 3.25 5.38

ClASS 9000 XXS Bore- CoUPliNgS- reDUCerS- hAlF CoUPliNg

DimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 C .855 1.065 1.330 1.675 1.915 2.406

DimeNSioNS C - CommoN To All FiTTiNgS (inches)

Page 11: Bonney Forge- Forged Stl. Fittings and Unions

9

Quikleg90™ - sOCkeT Weld - Threaded - buTT Weld

Class 3000Class 6000std-Xstg

ClAS

S 60

00

a nominal - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 - B nominal - 1 7/8 2 3/16 2 1/2 3 3 1/8 1 7/8 2 3/16 2 1/2 3 3 1/8 - C nominal - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 -

SoCkeT WelD ThreADeDDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2

ClAS

S 30

00

a nominal - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 B nominal - 1 7/8 1 7/8 2 3/16 2 1/2 3 1 7/8 1 7/8 2 3/16 2 1/2 3 3 1/8 C nominal - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2

SoCkeT WelD ThreADeDDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2

STD-

XSTg

a nominal 2 3/8 3 3 3/8 4 3/16 B nominal 3 3 3 3/8 4 3/16 C nominal 2 3/8 3 3 3/8 4 3/16

DimeNSioNS (inches)

NomiNAl PiPe Size 2 2 1/2 3 4

BUTT WelD

Socket Weld

Threaded

Butt Weld

8

Class 2000Class 3000

Threaded fiTTings

Class 6000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 h 1 1/4 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16

J 7/8 7/8 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2 k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5 l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (pounds)

90° elBoW .236 .350 .592 .973 1.355 2.265 2.407 3.50 5.920 11.900 14.438 31.975 45° elBoW .25 .290 .50 .75 1.188 1.988 2.235 3.00 4.930 7.375 13.558 19.063 tee .325 .460 .753 1.270 1.830 3.025 3.620 7.040 7.550 13.125 23.100 40.000 Street elBoW .264 .242 .375 .595 1.048 1.438 2.340 3.00 5.461 lateral .625 1.313 1.75 2.75 4.625 5.50 10.813 11.5 CroSS .438 .567 .970 1.50 2.50 3.620 4.125 6.50 8.125 16.75 25.675 32

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 90EL TEE a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2 STEL LAT B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6 F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8 h 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16

45EL a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 4 1/2 CROSS B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 6 F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8

J 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2 k 2 9/16 3 3 1/2 3 15/16 4 3/4 5 l 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (pounds)

90° elBoW .25 .625 1.023 1.625 2.625 3.50 6.75 7.50 13.438 20.875 39.050 38 45° elBoW .25 .640 .50 1.438 2.188 2.785 4.688 5.75 9.50 15 30.563 29 tee .50 .853 1.410 2.150 3.563 4.625 7.625 9.625 18.500 28.063 47.500 50 Street elBoW .375 .438 1 1.625 3.030 3.688 7.120 lateral 2.375 3.25 5.438 7.188 12.313 15.95 CroSS .563 1.188 1.50 2.75 4.313 6.625 10.75 11.50 22.188 27.50 54 43.50

DimeNSioNS (inches)

ClAS

S 60

00Cl

ASS

2000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 90EL TEE a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16 STEL LAT B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8

45EL a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2 CROSS B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8

DimeNSioNS (inches)

WeighT (pounds)

90° elBoW .25 .198 .283 .500 .773 1.013 1.550 2.180 3.140 6.50 10.925 26.675 45° elBoW .125 .188 .236 .435 .740 1.058 1.375 1.740 2.883 7.75 11.313 19.125 tee .25 .267 .373 .613 .963 1.355 2.030 2.800 4.456 9.530 12.908 28.700 CroSS .50 .50 .460 .777 1.125 1.688 2.450 3.188 5.560 16.438 19.50 32.688

Page 12: Bonney Forge- Forged Stl. Fittings and Unions

9

Quikleg90™ - sOCkeT Weld - Threaded - buTT Weld

Class 3000Class 6000std-Xstg

ClAS

S 60

00

a nominal - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 - B nominal - 1 7/8 2 3/16 2 1/2 3 3 1/8 1 7/8 2 3/16 2 1/2 3 3 1/8 - C nominal - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 -

SoCkeT WelD ThreADeDDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2

ClAS

S 30

00

a nominal - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 B nominal - 1 7/8 1 7/8 2 3/16 2 1/2 3 1 7/8 1 7/8 2 3/16 2 1/2 3 3 1/8 C nominal - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2

SoCkeT WelD ThreADeDDimeNSioNS (inches)

NomiNAl PiPe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2

STD-

XSTg

a nominal 2 3/8 3 3 3/8 4 3/16 B nominal 3 3 3 3/8 4 3/16 C nominal 2 3/8 3 3 3/8 4 3/16

DimeNSioNS (inches)

NomiNAl PiPe Size 2 2 1/2 3 4

BUTT WelD

Socket Weld

Threaded

Butt Weld

8

Class 2000Class 3000

Threaded fiTTings

Class 6000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 h 1 1/4 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16

J 7/8 7/8 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2 k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5 l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (pounds)

90° elBoW .236 .350 .592 .973 1.355 2.265 2.407 3.50 5.920 11.900 14.438 31.975 45° elBoW .25 .290 .50 .75 1.188 1.988 2.235 3.00 4.930 7.375 13.558 19.063 tee .325 .460 .753 1.270 1.830 3.025 3.620 7.040 7.550 13.125 23.100 40.000 Street elBoW .264 .242 .375 .595 1.048 1.438 2.340 3.00 5.461 lateral .625 1.313 1.75 2.75 4.625 5.50 10.813 11.5 CroSS .438 .567 .970 1.50 2.50 3.620 4.125 6.50 8.125 16.75 25.675 32

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 90EL TEE a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2 STEL LAT B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6 F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8 h 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16

45EL a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 4 1/2 CROSS B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 6 F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8

J 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2 k 2 9/16 3 3 1/2 3 15/16 4 3/4 5 l 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (pounds)

90° elBoW .25 .625 1.023 1.625 2.625 3.50 6.75 7.50 13.438 20.875 39.050 38 45° elBoW .25 .640 .50 1.438 2.188 2.785 4.688 5.75 9.50 15 30.563 29 tee .50 .853 1.410 2.150 3.563 4.625 7.625 9.625 18.500 28.063 47.500 50 Street elBoW .375 .438 1 1.625 3.030 3.688 7.120 lateral 2.375 3.25 5.438 7.188 12.313 15.95 CroSS .563 1.188 1.50 2.75 4.313 6.625 10.75 11.50 22.188 27.50 54 43.50

DimeNSioNS (inches)

ClAS

S 60

00Cl

ASS

2000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 90EL TEE a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16 STEL LAT B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8

45EL a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2 CROSS B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6 F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8

DimeNSioNS (inches)

WeighT (pounds)

90° elBoW .25 .198 .283 .500 .773 1.013 1.550 2.180 3.140 6.50 10.925 26.675 45° elBoW .125 .188 .236 .435 .740 1.058 1.375 1.740 2.883 7.75 11.313 19.125 tee .25 .267 .373 .613 .963 1.355 2.030 2.800 4.456 9.530 12.908 28.700 CroSS .50 .50 .460 .777 1.125 1.688 2.450 3.188 5.560 16.438 19.50 32.688

Page 13: Bonney Forge- Forged Stl. Fittings and Unions

10

sOCkeT Weld COuplings, reduCers & Caps

Class 3000Class 6000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

a 1 1/16 1 1/16 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3 aa 1 1/32 1 1/32 1 1/32 1 3/16 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64 B 3/4 7/8 1 1/16 1 1/4 1 1/2 1 13/16 2 1/4 2 1/2 3 3 5/8 4 5/16 5 1/2

C .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545 (Min.) D 7/16 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8

e 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4 F 11/16 3/4 3/4 7/8 1 1 1/16 1 3/16 1 1/4 1 1/2 1 9/16 1 13/16 2 1/16

WeighT (pounds)

CouPling .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625 reDuCer .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625 HalF CoUPlIng .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625 PiPe CaP .063 .063 .125 .188 .313 .563 .813 1.125 1.688 3 3.625 6.688

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 1 1/8 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3 aa 1 1/8 1 1/8 1 5/32 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64 B 1 1/16 1 5/16 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4

C .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545 (Min.) D 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8

e 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4 F 15/16 15/16 1 1 1/16 1 1/4 1 5/16 1 3/8 1 5/8 1 11/16 1 15/16 2 5/16

WeighT (pounds)

CouPling .375 .563 1 1.438 2 3.875 5.50 6.625 13.125 reDuCer .375 .563 1 1.438 2 3.875 5.50 6.625 13.125 HalF CoUPlIng .375 .563 1 1.438 2 3.875 5.50 6.625 13.125 PiPe CaP .375 .50 1.125 1.125 2.25 3.50 5.625 6 13.50

DimeNSioNS (inches)

ClAS

S 60

00

11

Threaded COuplings, reduCers & Caps

Class 3000Class 6000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4 B 3/4 3/4 7/8 1 1/8 1 3/8 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 1/2

C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8 D 15/16 1 1 1 1/4 1 7/16 1 5/8 1 3/4 1 3/4 1 7/8 2 3/8 2 9/16 2 11/16

WeighT (pounds)

CouPling .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75 reDuCer .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75 HalF CoUPlIng .063 .063 .188 .188 .25 .313 .75 1.125 1.563 2 3.375 8.375 PiPe CaP .031 .063 .125 .25 .313 .50 1 1.625 3.125 5 8.50 14

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4 B 7/8 1 1 1/4 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4

C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8 D 1 1 1/16 1 1/16 1 5/16 1 1/2 1 11/16 1 13/16 1 7/8 2 2 1/2 2 11/16 2 15/16

WeighT (pounds)

CouPling .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50 reDuCer .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50 HalF CoUPlIng .094 .094 .125 .25 .50 1.063 1.188 2.188 3.875 5.375 6.75 12.25 PiPe CaP .125 .125 .188 .313 .438 .75 1.313 1.688 3.25

DimeNSioNS (inches)

ClAS

S 60

00

Page 14: Bonney Forge- Forged Stl. Fittings and Unions

10

sOCkeT Weld COuplings, reduCers & Caps

Class 3000Class 6000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

a 1 1/16 1 1/16 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3 aa 1 1/32 1 1/32 1 1/32 1 3/16 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64 B 3/4 7/8 1 1/16 1 1/4 1 1/2 1 13/16 2 1/4 2 1/2 3 3 5/8 4 5/16 5 1/2

C .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545 (Min.) D 7/16 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8

e 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4 F 11/16 3/4 3/4 7/8 1 1 1/16 1 3/16 1 1/4 1 1/2 1 9/16 1 13/16 2 1/16

WeighT (pounds)

CouPling .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625 reDuCer .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625 HalF CoUPlIng .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625 PiPe CaP .063 .063 .125 .188 .313 .563 .813 1.125 1.688 3 3.625 6.688

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 1 1/8 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3 aa 1 1/8 1 1/8 1 5/32 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64 B 1 1/16 1 5/16 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4

C .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545 (Min.) D 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8

e 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4 F 15/16 15/16 1 1 1/16 1 1/4 1 5/16 1 3/8 1 5/8 1 11/16 1 15/16 2 5/16

WeighT (pounds)

CouPling .375 .563 1 1.438 2 3.875 5.50 6.625 13.125 reDuCer .375 .563 1 1.438 2 3.875 5.50 6.625 13.125 HalF CoUPlIng .375 .563 1 1.438 2 3.875 5.50 6.625 13.125 PiPe CaP .375 .50 1.125 1.125 2.25 3.50 5.625 6 13.50

DimeNSioNS (inches)

ClAS

S 60

00

11

Threaded COuplings, reduCers & Caps

Class 3000Class 6000

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4 B 3/4 3/4 7/8 1 1/8 1 3/8 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 1/2

C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8 D 15/16 1 1 1 1/4 1 7/16 1 5/8 1 3/4 1 3/4 1 7/8 2 3/8 2 9/16 2 11/16

WeighT (pounds)

CouPling .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75 reDuCer .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75 HalF CoUPlIng .063 .063 .188 .188 .25 .313 .75 1.125 1.563 2 3.375 8.375 PiPe CaP .031 .063 .125 .25 .313 .50 1 1.625 3.125 5 8.50 14

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4 B 7/8 1 1 1/4 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4

C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8 D 1 1 1/16 1 1/16 1 5/16 1 1/2 1 11/16 1 13/16 1 7/8 2 2 1/2 2 11/16 2 15/16

WeighT (pounds)

CouPling .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50 reDuCer .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50 HalF CoUPlIng .094 .094 .125 .25 .50 1.063 1.188 2.188 3.875 5.375 6.75 12.25 PiPe CaP .125 .125 .188 .313 .438 .75 1.313 1.688 3.25

DimeNSioNS (inches)

ClAS

S 60

00

Page 15: Bonney Forge- Forged Stl. Fittings and Unions

12

sOCkeT Weld reduCers inserTs (Mss-sp79)

Class 3000Class 6000Class 9000

3/8 x 1/4 .675 .555 1 7/16 3/4 15/16 1 7/16 7/8 1 1/2 x 3/8 .850 .690 1 7/16 13/16 1 1/16 1 7/16 15/16 1 3/16 1/2 x 1/4 .850 .555 1 7/16 13/16 15/16 1 7/16 7/8 1 3/4 x 1/2 1.060 .855 1 7/16 7/8 1 5/16 1 7/16 1 1/16 1 3/8 1 7/16 1 3/16 1 3/4 3/4 x 3/8 1.060 .690 2 7/16 5/8 - 1 7/16 7/8 1 3/16 3/4 x 1/4 1.060 .555 2 3/8 11/16 - 2 3/8 7/8 - 1 x 3/4 1.325 1.065 1 9/16 15/16 1 1/2 1 9/16 1 1/8 1 11/16 1 9/16 1 1/4 2 1 x 1/2 1.325 .855 2 1/2 5/8 - 1 7/16 1 1/8 1 3/8 1 7/16 1 1/8 1 3/4 1 x 3/8 1.325 .690 2 7/16 11/16 - 2 1/2 7/8 - 1 x 1/4 1.325 .555 2 3/8 3/4 - 2 3/8 15/16 - 1 1/4 x 1 1.670 1.330 1 9/16 1 1 7/8 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8 1 1/4 x 3/4 1.670 1.065 2 9/16 11/16 - 2 9/16 13/16 - 1 9/16 1 3/16 2 1 1/4 x 1/2 1.670 .855 2 1/2 3/4 - 2 1/2 7/8 - 2 1/2 7/8 - 1 1/4 x 3/8 1.670 .690 2 7/16 13/16 - 2 7/16 15/16 - 1 1/4 x 1/4 1.670 .555 2 3/8 7/8 - 2 3/8 1 - 1 1/2 x 1 1/4 1.910 1.675 1 9/16 1 1/8 2 1/4 1 9/16 1 3/8 2 3/8 1 9/16 1 5/8 2 3/4 1 1/2 x 1 1.910 1.330 2 5/8 11/16 - 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8 1 1/2 x 3/4 1.910 1.065 2 9/16 3/4 - 2 9/16 1 - 2 9/16 1 - 1 1/2 x 1/2 1.910 .855 2 1/2 13/16 - 2 1/2 1 1/16 - 2 9/16 1 - 1 1/2 x 3/8 1.910 .690 2 7/16 7/8 - 2 7/16 1 1/8 - 2 x 1 1/2 2.385 1.915 1 9/16 1 1/4 2 1/2 1 9/16 1 7/8 2 11/16 1 9/16 2 1/16 3 2 x 1 1/4 2.385 1.675 2 11/16 13/16 - 2 7/8 15/16 - 1 9/16 2 2 3/4 2 x 1 2.385 1.330 2 5/8 7/8 - 2 13/16 1 - 2 13/16 1 - 2 x 3/4 2.385 1.065 2 9/16 15/16 - 2 3/4 1 1/16 - 2 3/4 1 1/16 - 2 x 1/2 2.385 .855 2 1/2 1 - 2 11/16 1 1/8 - 2 11/16 1 1/8 -

NomiNAl PiPe Size C D Ftg. Type A B e Ftg. Type A B e Ftg. Type A B e

ClASS 3000 ClASS 6000 ClASS 9000

Note: Socket Weld Reducer Inserts comply fully with MSS-SP-79

TYPe 1 TYPe 2

13

Threaded plugs & bushings

* Dimension J for Hex Head Bushing and dimension C for Hex Head Plug are the same.

Class 3000/6000

Round Head Plug

Hexagon Bushing

Square Head Plug

Hexagon Plug

Flush Bushing

a 1 3/8 1 5/8 1 5/8 1 3/4 1 3/4 2 2 2 2 1/2 2 3/4 2 3/4 3 B 13/32 17/32 11/16 27/32 1 1/16 1 5/16 1 11/16 1 29/32 2 3/8 2 7/8 3 1/2 4 1/2 C * 7/16 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8 D 1/4 1/4 5/16 5/16 3/8 3/8 9/16 5/8 11/16 3/4 13/16 1 1/4 e 7/16 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32 F 9/32 3/8 7/16 9/16 5/8 1 3/16 15/16 1 1/8 1 5/16 1 1/2 1 11/16 2 1/2 g 1/4 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 1 1/4 h 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 3/8 J 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8 k 3/16 3/16 3/16 1/4 1/4 3/8 3/8 3/8 1/2 13/16 1 1/4 l 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32 M 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4 n 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

DimeNSioNS (inches)

rounD heaD PugS .125 .125 .188 .250 .375 .750 1.125 1.563 3.00 4.75 7.62 12.87 hexagon PlugS .063 .063 .125 .188 .313 .500 1.125 1.375 2.25 3.87 5.87 13.00 SQuare heaD PlugS .016 .031 .063 .125 .188 .313 .563 .875 1.50 2.25 2.87 7.18

hexagon BuShingS .063 .063 .063 .125 .188 .375 .688 1.62 2.37 3.50 8.31 FlUSH BUSHIngS .063 .063 .063 .125 .125 .125 .188 .37 .62 1.00 2.00

WeighT (pounds)

Page 16: Bonney Forge- Forged Stl. Fittings and Unions

12

sOCkeT Weld reduCers inserTs (Mss-sp79)

Class 3000Class 6000Class 9000

3/8 x 1/4 .675 .555 1 7/16 3/4 15/16 1 7/16 7/8 1 1/2 x 3/8 .850 .690 1 7/16 13/16 1 1/16 1 7/16 15/16 1 3/16 1/2 x 1/4 .850 .555 1 7/16 13/16 15/16 1 7/16 7/8 1 3/4 x 1/2 1.060 .855 1 7/16 7/8 1 5/16 1 7/16 1 1/16 1 3/8 1 7/16 1 3/16 1 3/4 3/4 x 3/8 1.060 .690 2 7/16 5/8 - 1 7/16 7/8 1 3/16 3/4 x 1/4 1.060 .555 2 3/8 11/16 - 2 3/8 7/8 - 1 x 3/4 1.325 1.065 1 9/16 15/16 1 1/2 1 9/16 1 1/8 1 11/16 1 9/16 1 1/4 2 1 x 1/2 1.325 .855 2 1/2 5/8 - 1 7/16 1 1/8 1 3/8 1 7/16 1 1/8 1 3/4 1 x 3/8 1.325 .690 2 7/16 11/16 - 2 1/2 7/8 - 1 x 1/4 1.325 .555 2 3/8 3/4 - 2 3/8 15/16 - 1 1/4 x 1 1.670 1.330 1 9/16 1 1 7/8 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8 1 1/4 x 3/4 1.670 1.065 2 9/16 11/16 - 2 9/16 13/16 - 1 9/16 1 3/16 2 1 1/4 x 1/2 1.670 .855 2 1/2 3/4 - 2 1/2 7/8 - 2 1/2 7/8 - 1 1/4 x 3/8 1.670 .690 2 7/16 13/16 - 2 7/16 15/16 - 1 1/4 x 1/4 1.670 .555 2 3/8 7/8 - 2 3/8 1 - 1 1/2 x 1 1/4 1.910 1.675 1 9/16 1 1/8 2 1/4 1 9/16 1 3/8 2 3/8 1 9/16 1 5/8 2 3/4 1 1/2 x 1 1.910 1.330 2 5/8 11/16 - 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8 1 1/2 x 3/4 1.910 1.065 2 9/16 3/4 - 2 9/16 1 - 2 9/16 1 - 1 1/2 x 1/2 1.910 .855 2 1/2 13/16 - 2 1/2 1 1/16 - 2 9/16 1 - 1 1/2 x 3/8 1.910 .690 2 7/16 7/8 - 2 7/16 1 1/8 - 2 x 1 1/2 2.385 1.915 1 9/16 1 1/4 2 1/2 1 9/16 1 7/8 2 11/16 1 9/16 2 1/16 3 2 x 1 1/4 2.385 1.675 2 11/16 13/16 - 2 7/8 15/16 - 1 9/16 2 2 3/4 2 x 1 2.385 1.330 2 5/8 7/8 - 2 13/16 1 - 2 13/16 1 - 2 x 3/4 2.385 1.065 2 9/16 15/16 - 2 3/4 1 1/16 - 2 3/4 1 1/16 - 2 x 1/2 2.385 .855 2 1/2 1 - 2 11/16 1 1/8 - 2 11/16 1 1/8 -

NomiNAl PiPe Size C D Ftg. Type A B e Ftg. Type A B e Ftg. Type A B e

ClASS 3000 ClASS 6000 ClASS 9000

Note: Socket Weld Reducer Inserts comply fully with MSS-SP-79

TYPe 1 TYPe 2

13

Threaded plugs & bushings

* Dimension J for Hex Head Bushing and dimension C for Hex Head Plug are the same.

Class 3000/6000

Round Head Plug

Hexagon Bushing

Square Head Plug

Hexagon Plug

Flush Bushing

a 1 3/8 1 5/8 1 5/8 1 3/4 1 3/4 2 2 2 2 1/2 2 3/4 2 3/4 3 B 13/32 17/32 11/16 27/32 1 1/16 1 5/16 1 11/16 1 29/32 2 3/8 2 7/8 3 1/2 4 1/2 C * 7/16 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8 D 1/4 1/4 5/16 5/16 3/8 3/8 9/16 5/8 11/16 3/4 13/16 1 1/4 e 7/16 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32 F 9/32 3/8 7/16 9/16 5/8 1 3/16 15/16 1 1/8 1 5/16 1 1/2 1 11/16 2 1/2 g 1/4 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 1 1/4 h 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 3/8 J 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8 k 3/16 3/16 3/16 1/4 1/4 3/8 3/8 3/8 1/2 13/16 1 1/4 l 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32 M 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4 n 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

DimeNSioNS (inches)

rounD heaD PugS .125 .125 .188 .250 .375 .750 1.125 1.563 3.00 4.75 7.62 12.87 hexagon PlugS .063 .063 .125 .188 .313 .500 1.125 1.375 2.25 3.87 5.87 13.00 SQuare heaD PlugS .016 .031 .063 .125 .188 .313 .563 .875 1.50 2.25 2.87 7.18

hexagon BuShingS .063 .063 .063 .125 .188 .375 .688 1.62 2.37 3.50 8.31 FlUSH BUSHIngS .063 .063 .063 .125 .125 .125 .188 .37 .62 1.00 2.00

WeighT (pounds)

Page 17: Bonney Forge- Forged Stl. Fittings and Unions

14

Mss-sp-83 uniOns - Threaded & sOCkeT Weld

Class 3000Class 6000

* “C” dimension is across octagon corners or a diameter as applicable. The 2 1/2" and 3" 3000 and 2" 6000 sizes have octagonal male and female ends; the other sizes are round.

Threaded Socket Weld

B & C dimenSionS aCRoSS oCTagon CoRneRS

B & C dimenSionS aCRoSS oCTagon CoRneRS

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 a 1 11/16 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/4 4 7/16 B 1 31/64 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64 6 5/32 C 53/64 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16 4 9/32 D 25/32 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8 2 7/16 (Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535

WeighT Per UNioN (pounds)

.38 .36 .50 .695 1.175 1.64 2.59 3.41 5.12 8.75 12.625

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 a 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/8 B 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64 C 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16 D 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8 (Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406

WeighT Per UNioN (pounds)

.5 .56 .75 1.25 1.75 3 3.75 6.0 10.5

DimeNSioNS (inches)

ClAS

S 60

00

15

rOCkWOOd uniOns

Type 601Type 602Type 602bType 604

• Ball to cone seats for smooth alignment.• Can be cracked and rejoined- repeatedly.• Replaceable, interchangeable parts.• Carbon Steel, coated to resist corrosion.• Stays sealed, despite shock, vibration,

expansion and rough wrenching.• Silicon bronze and stainless steel seats

double locked under 120,000 lb. psi.• Conveniently packaged.• Suitable for use with Schedule

40/80 pipe.• 100% hydro tested.

NomiNAl PiPe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT

DePth SoCket 7/16 7/16 7/16 1/2 1/2 9/16 9/16 9/16 11/16 SoCket DiaMeter .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406STYle NUT hex hex hex hex octagon octagon octagon octagon octagon

WeighT Per UNioN (pounds)

.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6

DimeNSioNS (inches)

TYPe

602

B

NomiNAl PiPe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT

a 1 3/4 1 3/4 2 2 1/4 2 7/16 2 11/16 2 31/32 3 1/8 3 11/16 B 1 1/4 1 1/4 1 7/16 1 21/32 2 2 3/8 2 3/4 3 3 23/32 C 3/4 3/4 7/8 1 3/32 1 25/64 1 5/8 2 2 9/32 2 51/64 D 51/64 51/64 15/16 1 11/64 1 7/16 1 23/32 2 3/32 2 11/32 2 7/8 e .264 .402 .408 .534 .548 .683 .707 .724 .757 F 3/4 3/4 13/16 1 1 1/16 1 3/32 1 19/64 1 21/64 1 15/32 g 1/2 1/2 9/16 11/16 3/4 27/32 7/8 1 1 7/32 h 19/32 19/32 3/4 25/32 29/32 1 1/16 1 5/32 1 7/32 1 7/16 i 21/64 3/8 1/2 5/8 27/32 1 1/16 1 13/32 1 21/32 2 1/16 J 29/32 29/32 1 1/16 1 5/16 1 37/64 1 13/16 2 1/4 2 1/2 3 1/16 k 1/8 1/8 1/8 3/16 7/32 7/32 9/32 9/32 19/64 l 7/8 7/8 15/16 1 1/8 1 3/16 1 5/16 1 7/16 1 1/2 1 25/32 M 1.035 1.035 1.164 1.437 1.693 1.975 2.416 2.649 3.221STYle NUT hex hex hex hex octagon octagon octagon octagon octagon

WeighT Per UNioN (pounds)

.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6

DimeNSioNS (inches)

TYPe

601

, 602

, 604

* Preferred over bronze to carbon steel seated unions.

Page 18: Bonney Forge- Forged Stl. Fittings and Unions

14

Mss-sp-83 uniOns - Threaded & sOCkeT Weld

Class 3000Class 6000

* “C” dimension is across octagon corners or a diameter as applicable. The 2 1/2" and 3" 3000 and 2" 6000 sizes have octagonal male and female ends; the other sizes are round.

Threaded Socket Weld

B & C dimenSionS aCRoSS oCTagon CoRneRS

B & C dimenSionS aCRoSS oCTagon CoRneRS

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 a 1 11/16 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/4 4 7/16 B 1 31/64 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64 6 5/32 C 53/64 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16 4 9/32 D 25/32 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8 2 7/16 (Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535

WeighT Per UNioN (pounds)

.38 .36 .50 .695 1.175 1.64 2.59 3.41 5.12 8.75 12.625

DimeNSioNS (inches)

ClAS

S 30

00

NomiNAl PiPe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 a 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/8 B 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64 C 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16 D 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8 (Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406

WeighT Per UNioN (pounds)

.5 .56 .75 1.25 1.75 3 3.75 6.0 10.5

DimeNSioNS (inches)

ClAS

S 60

00

15

rOCkWOOd uniOns

Type 601Type 602Type 602bType 604

• Ball to cone seats for smooth alignment.• Can be cracked and rejoined- repeatedly.• Replaceable, interchangeable parts.• Carbon Steel, coated to resist corrosion.• Stays sealed, despite shock, vibration,

expansion and rough wrenching.• Silicon bronze and stainless steel seats

double locked under 120,000 lb. psi.• Conveniently packaged.• Suitable for use with Schedule

40/80 pipe.• 100% hydro tested.

NomiNAl PiPe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT

DePth SoCket 7/16 7/16 7/16 1/2 1/2 9/16 9/16 9/16 11/16 SoCket DiaMeter .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406STYle NUT hex hex hex hex octagon octagon octagon octagon octagon

WeighT Per UNioN (pounds)

.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6

DimeNSioNS (inches)

TYPe

602

B

NomiNAl PiPe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT

a 1 3/4 1 3/4 2 2 1/4 2 7/16 2 11/16 2 31/32 3 1/8 3 11/16 B 1 1/4 1 1/4 1 7/16 1 21/32 2 2 3/8 2 3/4 3 3 23/32 C 3/4 3/4 7/8 1 3/32 1 25/64 1 5/8 2 2 9/32 2 51/64 D 51/64 51/64 15/16 1 11/64 1 7/16 1 23/32 2 3/32 2 11/32 2 7/8 e .264 .402 .408 .534 .548 .683 .707 .724 .757 F 3/4 3/4 13/16 1 1 1/16 1 3/32 1 19/64 1 21/64 1 15/32 g 1/2 1/2 9/16 11/16 3/4 27/32 7/8 1 1 7/32 h 19/32 19/32 3/4 25/32 29/32 1 1/16 1 5/32 1 7/32 1 7/16 i 21/64 3/8 1/2 5/8 27/32 1 1/16 1 13/32 1 21/32 2 1/16 J 29/32 29/32 1 1/16 1 5/16 1 37/64 1 13/16 2 1/4 2 1/2 3 1/16 k 1/8 1/8 1/8 3/16 7/32 7/32 9/32 9/32 19/64 l 7/8 7/8 15/16 1 1/8 1 3/16 1 5/16 1 7/16 1 1/2 1 25/32 M 1.035 1.035 1.164 1.437 1.693 1.975 2.416 2.649 3.221STYle NUT hex hex hex hex octagon octagon octagon octagon octagon

WeighT Per UNioN (pounds)

.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6

DimeNSioNS (inches)

TYPe

601

, 602

, 604

* Preferred over bronze to carbon steel seated unions.

Page 19: Bonney Forge- Forged Stl. Fittings and Unions

16

lug nuT uniOns

Class 3000

Lug Nut Unions from Bonney Forge are unions with modified Stub-Acme threads ideal for applications requiring rapid assembly and/or breakdown.

• Threaded and socket weld ends.• Seating characteristics of AAR unions.• Twin lugs in sizes up to 3/4" Class 3000 and 1/2 Class 6000.• Tri-lug design in sizes from 1"- 4" Class 3000 and 3/4" - 2" Class 6000.

NomiNAl PiPe Size

3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

DimeNSioNS (inches)A

1.9502.0652.3752.5802.9503.1153.5754.2004.4758.50

Class 6000

ClAS

S 30

00

ClAS

S 60

00

A

2.0652.3752.5802.9503.1153.5754.200 - - -

note: The material in this catalog is for general information. For specific performance data and proper material selection, consult your Bonney Forge representative. although every attempt has been made to ensure that the information contained in this catalog is correct, Bonney Forge reserves the right to change designs, materials or specifications without notice.

Printed in u.S.a. Catalog F9-2006 (2.5M 11/06)

PATeNTS

goVerNiNg lAW

geNerAl TermS AND CoNDiTioNS oF SAle oF: BoNNeY Forge (hereAFTer reFerreD To AS “BF”) WArrANTY

eXClUSioNS

PUrChASer’S remeDieS

PriCeS

ACCePTANCe oF orDerS

remiTTANCeS

TAXeS

ShorTAgeS & DAmAgeS iN TrANSiTDelAYS

CANCellATioN & SUSPeNSioN

reTUrN oF mATeriAl

No WAiVer

DieS, ToolS AND PATTerNS

ForCe mAJeUre

PUrChASer’S ACCePTANCe oF ABoVe CoNDiTioNS

PArTiAl ShiP-meNTS AND PAYmeNTS

All products are warranted to be free from manufacturing defects for a period of one (1) year from date of shipment, and any found to be defective within that period will be replaced without charge, provided (1) that the product was used as recommended and in accordance with approved installation and operating practices, (2) that its failure resulted from a manufacturing defect and not from damage due to corrosive, abrasive, or other wear normally to be expected in the services involved, (3) that the product was not modified or changed (unless written approval was given by BF), and (4) that written notice of such defect is delivered to BF during such one (1) year period. no labor costs or other expense or liability is assumed. The Uniform Commercial Code shall not apply to the sale, nor the Michigan statutes adopting the Uniform Commercial Code. This express warranty is in lieu of and excludes all other warranties, guarantees, or representations, expressed or implied. THere Are no IMPLIeD WArrAnTIeS oF MerCHAnTABILITy or oF FITneSS For A PArTICULAr PUrPoSe.

Do not use BF products in aircraft or aerospace applications. no warranties, guarantees or representations of any kind are made with respect to such applications. Purchaser assumes all risks of any use in such applications and will indemnify and hold harmless BF against and from any claims, costs (including attorney’s fees) and liabilities arising out of such use.

The Purchaser’s remedies with respect to any product furnished by BF hereunder that is found not to be in conformity with the terms and conditions of the contract because of breach of contract, breach of express or implied warranty, or negligence shall be limited exclusively to the right of replacement of such defective product or, at our option, repayment of our sale price of the product. In no event shall BF be liable for claims (based upon breach of contract, breach of express or implied warranty, or negligence) for any other damages, whether direct, immediate, foreseeable, consequential, or special or for any expenses incurred by reason of the use or misuse, sale or fabrication of products which do or do not conform to the terms and conditions of the contract.

Prices, and other terms of sale and payment, are subject to change without notice. Unless a contrary provision appears in this price schedule, quotation or order acknowledgment, prices may be withdrawn without notice at any time. Stenographic or clerical errors are subject to correction.

All orders are subject to BF credit department approval prior to acceptance by BF. no assignment of the Purchaser’s rights may be made without the written consent of BF.

All accounts are payable in United States funds, free of exchange, collection, or any other charges. If, in the sole discretion of BF, the financial condition of the Purchaser at any time so requires, BF retains the right to require full or partial payment in advance.

BF reserves the right to make partial shipments from time to time, and to render invoices therefore, which shall be due and payable as provided in said invoices and the paragraph entitled “remittances”. If the Purchaser becomes overdue in any such partial payment, BF shall be entitled to suspend work and/or avail itself of other legal remedies.

Unless otherwise specifically noted, the amount of any sale, use, occupancy, excise tax, or other tax, of any nature, federal, state, or local for which BF is legally liable, either initially or through failure of payment by Purchaser, shall be added or be in addition to the price quoted and Purchaser agrees to pay the same to BF.

Claims for shortages must be made in writing within ten days after receipt of shipment, but loss of or damage to material in transit is the responsibility of the carrier.

All promises of shipment are estimated as closely as possible, and we will use our best efforts to ship within the time promised but do not guarantee to do so, and assume no liability for not doing so. Materials stated to be in stock are subject to prior sale.

The order or contract is subject to cancellation or instructions to suspend or delay work or delivery only upon receipt of written notification and with our consent, and upon agreement to pay BF’s adjustment charge. orders for special products (usually “price on application” items) may be changed and/or cancelled only upon receipt of written instructions with an expressed agreement to make payment for material used and work already performed.

no product of our manufacture may be returned without written consent. All goods returned are subject to a handling charge plus freight in both directions and charges for any required reconditioning, unless otherwise specified in writing by BF.

Purchaser will indemnify and hold harmless BF against and from any claims, costs (including attorney’s fees) and liabilities arising out of any suit alleging infringement of any patents, by any product supplied by BF under the contract and made in accordance with the design and/or specification furnished by the Purchaser to BF.

The contract shall be governed by, construed, and enforced in accordance with the laws of the Commonwealth of Pennsylvania, without regard to conflict of law principles.

The failure of BF to insist, in any one or more instances upon the performance of any of the terms, covenants, or conditions of the contract or to exercise any right thereunder shall not be construed as a waiver or relinquishment of the future performance of any such term, covenant, or condition or the future exercise of such rights, nor shall it be deemed to be a waiver or relinquishment of any other term, covenant, or condition or the exercise of any other rights under the contract.

Dies, tools and patterns required to produce the article quoted on shall remain the property of BF. Preparation charges for dies, tools and patterns represent only a portion of cost. Payment of such charge does not give you any right, title, or interest in such dies, tools, or other products of preparation. We will not be responsible for retention of dies or patterns on which no orders are received for two years or more.

Any delays in or failure of performance of BF shall not constitute default or give rise to any claims or damages if and to the extent that such delay or failure is caused by occurrences beyond the control of BF, including but not limited to acts of god or the public enemy, expropriation or confiscation of facilities, compliance with any order or request of any governmental authority, acts of war, rebellion or sabotage or damage resulting therefrom, embargoes or other export restrictions, fires, floods, explosions, accidents, breakdowns, riots or strikes or other conceived acts of workmen, whether direct or indirect, or any other causes whether or not of the same class or kind as those specifically above named which are not within the control of BF and which by the exercise of reasonable diligence, BF is unable to prevent or provide against.

The contract shall be subject to the terms and conditions contained or referred to in BF’s price schedule, quotation or order acknowledgment and to no others whatsoever. no waiver, alteration, or modification of the terms and conditions in this price schedule, quotation or order acknowledgment shall be binding unless in writing and signed by an authorized representative of BF.

Page 20: Bonney Forge- Forged Stl. Fittings and Unions

16

lug nuT uniOns

Class 3000

Lug Nut Unions from Bonney Forge are unions with modified Stub-Acme threads ideal for applications requiring rapid assembly and/or breakdown.

• Threaded and socket weld ends.• Seating characteristics of AAR unions.• Twin lugs in sizes up to 3/4" Class 3000 and 1/2 Class 6000.• Tri-lug design in sizes from 1"- 4" Class 3000 and 3/4" - 2" Class 6000.

NomiNAl PiPe Size

3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

DimeNSioNS (inches)A

1.9502.0652.3752.5802.9503.1153.5754.2004.4758.50

Class 6000

ClAS

S 30

00

ClAS

S 60

00

A

2.0652.3752.5802.9503.1153.5754.200 - - -

note: The material in this catalog is for general information. For specific performance data and proper material selection, consult your Bonney Forge representative. although every attempt has been made to ensure that the information contained in this catalog is correct, Bonney Forge reserves the right to change designs, materials or specifications without notice.

Printed in u.S.a. Catalog F9-2006 (2.5M 11/06)

PATeNTS

goVerNiNg lAW

geNerAl TermS AND CoNDiTioNS oF SAle oF: BoNNeY Forge (hereAFTer reFerreD To AS “BF”) WArrANTY

eXClUSioNS

PUrChASer’S remeDieS

PriCeS

ACCePTANCe oF orDerS

remiTTANCeS

TAXeS

ShorTAgeS & DAmAgeS iN TrANSiTDelAYS

CANCellATioN & SUSPeNSioN

reTUrN oF mATeriAl

No WAiVer

DieS, ToolS AND PATTerNS

ForCe mAJeUre

PUrChASer’S ACCePTANCe oF ABoVe CoNDiTioNS

PArTiAl ShiP-meNTS AND PAYmeNTS

All products are warranted to be free from manufacturing defects for a period of one (1) year from date of shipment, and any found to be defective within that period will be replaced without charge, provided (1) that the product was used as recommended and in accordance with approved installation and operating practices, (2) that its failure resulted from a manufacturing defect and not from damage due to corrosive, abrasive, or other wear normally to be expected in the services involved, (3) that the product was not modified or changed (unless written approval was given by BF), and (4) that written notice of such defect is delivered to BF during such one (1) year period. no labor costs or other expense or liability is assumed. The Uniform Commercial Code shall not apply to the sale, nor the Michigan statutes adopting the Uniform Commercial Code. This express warranty is in lieu of and excludes all other warranties, guarantees, or representations, expressed or implied. THere Are no IMPLIeD WArrAnTIeS oF MerCHAnTABILITy or oF FITneSS For A PArTICULAr PUrPoSe.

Do not use BF products in aircraft or aerospace applications. no warranties, guarantees or representations of any kind are made with respect to such applications. Purchaser assumes all risks of any use in such applications and will indemnify and hold harmless BF against and from any claims, costs (including attorney’s fees) and liabilities arising out of such use.

The Purchaser’s remedies with respect to any product furnished by BF hereunder that is found not to be in conformity with the terms and conditions of the contract because of breach of contract, breach of express or implied warranty, or negligence shall be limited exclusively to the right of replacement of such defective product or, at our option, repayment of our sale price of the product. In no event shall BF be liable for claims (based upon breach of contract, breach of express or implied warranty, or negligence) for any other damages, whether direct, immediate, foreseeable, consequential, or special or for any expenses incurred by reason of the use or misuse, sale or fabrication of products which do or do not conform to the terms and conditions of the contract.

Prices, and other terms of sale and payment, are subject to change without notice. Unless a contrary provision appears in this price schedule, quotation or order acknowledgment, prices may be withdrawn without notice at any time. Stenographic or clerical errors are subject to correction.

All orders are subject to BF credit department approval prior to acceptance by BF. no assignment of the Purchaser’s rights may be made without the written consent of BF.

All accounts are payable in United States funds, free of exchange, collection, or any other charges. If, in the sole discretion of BF, the financial condition of the Purchaser at any time so requires, BF retains the right to require full or partial payment in advance.

BF reserves the right to make partial shipments from time to time, and to render invoices therefore, which shall be due and payable as provided in said invoices and the paragraph entitled “remittances”. If the Purchaser becomes overdue in any such partial payment, BF shall be entitled to suspend work and/or avail itself of other legal remedies.

Unless otherwise specifically noted, the amount of any sale, use, occupancy, excise tax, or other tax, of any nature, federal, state, or local for which BF is legally liable, either initially or through failure of payment by Purchaser, shall be added or be in addition to the price quoted and Purchaser agrees to pay the same to BF.

Claims for shortages must be made in writing within ten days after receipt of shipment, but loss of or damage to material in transit is the responsibility of the carrier.

All promises of shipment are estimated as closely as possible, and we will use our best efforts to ship within the time promised but do not guarantee to do so, and assume no liability for not doing so. Materials stated to be in stock are subject to prior sale.

The order or contract is subject to cancellation or instructions to suspend or delay work or delivery only upon receipt of written notification and with our consent, and upon agreement to pay BF’s adjustment charge. orders for special products (usually “price on application” items) may be changed and/or cancelled only upon receipt of written instructions with an expressed agreement to make payment for material used and work already performed.

no product of our manufacture may be returned without written consent. All goods returned are subject to a handling charge plus freight in both directions and charges for any required reconditioning, unless otherwise specified in writing by BF.

Purchaser will indemnify and hold harmless BF against and from any claims, costs (including attorney’s fees) and liabilities arising out of any suit alleging infringement of any patents, by any product supplied by BF under the contract and made in accordance with the design and/or specification furnished by the Purchaser to BF.

The contract shall be governed by, construed, and enforced in accordance with the laws of the Commonwealth of Pennsylvania, without regard to conflict of law principles.

The failure of BF to insist, in any one or more instances upon the performance of any of the terms, covenants, or conditions of the contract or to exercise any right thereunder shall not be construed as a waiver or relinquishment of the future performance of any such term, covenant, or condition or the future exercise of such rights, nor shall it be deemed to be a waiver or relinquishment of any other term, covenant, or condition or the exercise of any other rights under the contract.

Dies, tools and patterns required to produce the article quoted on shall remain the property of BF. Preparation charges for dies, tools and patterns represent only a portion of cost. Payment of such charge does not give you any right, title, or interest in such dies, tools, or other products of preparation. We will not be responsible for retention of dies or patterns on which no orders are received for two years or more.

Any delays in or failure of performance of BF shall not constitute default or give rise to any claims or damages if and to the extent that such delay or failure is caused by occurrences beyond the control of BF, including but not limited to acts of god or the public enemy, expropriation or confiscation of facilities, compliance with any order or request of any governmental authority, acts of war, rebellion or sabotage or damage resulting therefrom, embargoes or other export restrictions, fires, floods, explosions, accidents, breakdowns, riots or strikes or other conceived acts of workmen, whether direct or indirect, or any other causes whether or not of the same class or kind as those specifically above named which are not within the control of BF and which by the exercise of reasonable diligence, BF is unable to prevent or provide against.

The contract shall be subject to the terms and conditions contained or referred to in BF’s price schedule, quotation or order acknowledgment and to no others whatsoever. no waiver, alteration, or modification of the terms and conditions in this price schedule, quotation or order acknowledgment shall be binding unless in writing and signed by an authorized representative of BF.