2375/03.02

RIVKLE PNBlind rivet nuts with slotted shank

Blind rivet nuts and tools for ultimate tear resistancedesigned for use in plastic and thin sheet metal.

For lo

west

price

s:

sales

@ac

einds

uppli

es.co

m

RIVKLE PN for ultimate pull-out force values.The RIVKLE PN blind rivet nut has been specially designed for integrating into thin-walled sheet steel,hollow sections or synthetic parts requiring high pull-out forces. The slotted shank splays out into four petalson the blind side of the base material, thus offering a large bearing surface and ensuring maximum pull-out force.

Additional design benefits of RIVKLE PN are: In addition, the RIVKLE PN displays the largest clamping area of the range of blind rivet nuts for variable

thicknesses of material Large clamping area to reinforce the workpiece Minimal radial stresses in the setting process to avoid the risk of breakage on soft or fragile materials Available in steel, aluminium and stainless steel Available in thread sizes M 4 to M 10 (non-metric/imperial measurements on request)

Impressive pull-out resistanceThe following table compares pull-out forces for the standard RIVKLE blind rivet nut and the RIVKLE PN blind rivet nut in thematerials illustrated above.

RIVKLE PN Pre-Bulbed (on request)The Pre-Bulbed RIVKLE PN blind rivet nut features all the functions and advantages of the standarddesign. In addition, thanks to its gentle pre-splaying, torque can be applied to the fastener as it is beingassembled with a pneumatic riveting tool. Assembly is also possible using a simple, inexpensive manual keymounting tool, which can be supplied to the customer together with Pre-Bulbed RIVKLE PN(in which case a standard screw will have to be substituted for the riveted joint when assembling the screw-down component).

Blind rivet 0.76 mm 2.92 mm 6.29 mm 3.04 mm 1.65 mm 4.69 mmnut type steel vinyl extrusion pultruded rotoformed SMC blow-moulded

plastic plastic plastic plastic

RIVKLE 2.13 kN 0.9 kN 6.76 kN 0.1 kN 0.6 kN 1.25 kN

RIVKLE

PN 5.40 kN 2.75 kN 8.40 kN 0.7 kN 1.62 kN 3.22 kN

Thin-walledsheet

Rotoformed plastic

Pultruded plastic

Vinyl extrusion

Blow-moulded plastic

SMC plastic

Note: Pull-out testing was conducted with a circular holding-down plate, dia. 65 mm. Bllhoff recommends testing under real application conditions inorder to determine the exact pull-out force.

2

For lo

west

price

s:

sales

@ac

einds

uppli

es.co

m

Customer-specific assembly tools

Winding onto the Insertion into the tool mandrel location hole Clenching Unwinding

The setting process: Four simple steps

C 302: Pneumatic assembly toolWith the C 302 setting tool, all types of blind rivet nuts from theRIVKLE PN range can be mounted.For constant material thicknesses, the setting stroke can beadjusted to that of the blind rivet nut in question (tensionsetting: stroke regulated). For applications with multiple orvariable material thicknesses, the setting stroke can bemaximized and the compressed air supply to the tool restrictedso that the tool always sets the blind rivet nut correctly (tensionsetting: power regulated). Thanks to this dual capability,the C 302 is an extremely versatile setting tool.

Cycle time: 15 to 20 /min. Weight: 2.8 kg Max. setting stroke: 12.7 mm Max. setting power: 26.7 kN

Of course, all blind rivet nuts from the standard range can beriveted with the C 302 as well.

Type S:One-dimensional manual installation toolOne-dimensional riveting tool with helical gearing. Winds theRIVKLE PN blind rivet nut on and off manually by means of acrank handle and key (included in scope of delivery).

Cycle time: up to 2 /min. Max. setting stroke: 6 mm

This tool is supplied with a nose pece and threaded mandrel fora single dimension (e.g. M 6).

3

For lo

west

price

s:

sales

@ac

einds

uppli

es.co

m

RIVKLE PN Technical dataThe RIVKLE PN blind rivet nut was designed to achieve maximum pull-out resistance in thin-walled sheet metal and plastic. The slotted shanksplays out into four petals, thereby presenting a large closing head bearing area on the blind side of the base material. In addition, the RIVKLE

PN displays the largest clamping area of the range of blind rivet nuts.

Thread tolerance: 6 HMaterial: steelSurface: 8 Zinc Di-Chromate

Note 1: Also available in stainless steel and aluminium materials upon request.Note 2: Countersunk head, non-standard measurements, finishes or design modifications upon request.

2L

H

ed

LB

E

D

All dimensions given in millimetres

d e H D E B L L2

Location hole Max. shank Head- Total AssembledMeasurements Clamping area Min. Max. dia. thickness Head dia. length length Part No.

M 4 x 0.7 0.50-3.80 6.13 6.25 6.12 0.96 11.1 17.6 8.6 6683 041 1038

M 5 x 0.8 0.50-4.45 7.48 7.62 7.47 0.96 12.7 22.0 9.9 6683 051 1044

M 6 x 1.0 0.50-7.10 8.80 8.93 8.79 1.50 15.9 26.9 12.8 6683 061 1071

M 8 x 1.25 0.50-7.10 11.11 11.50 11.10 1.57 19.0 30.5 14.5 6683 081 1071

M 10 x 1.50 0.50-7.10 13.07 13.26 13.06 2.24 22.2 33.2 15.8 6683 101 1071

Business Unit Fastening and Assembly Technology

P.O. Box 140229 33622 Bielefeld Archimedesstrae 14 33649 Bielefeld GermanyPhone (+49) 521 /4482 - 03 (-232) Fax (+49) 521 /4482 -371 Internet www.boellhoff.com E-mail ihoernlein@boellhoff.de

For lo

west

price

s:

sales

@ac

einds

uppli

es.co

m