Interpretation of accessibility codes is changing.

Bobrick is responding with thoughtful ADA design.

Introducing Horizontal Combination Units Toilet Seat Cover Dispenser, Toilet Tissue Dispenser and Waste Receptacle

Waste Disposal between toilet tissue dispenser and rear wall meets 2019 California Building Code

Center line of tissue dispenser is 7"-9" in front of leading edge of toilet for compliance

Mounting unit 1 ½" minimum below grab bar does not interfere with wall spacing behind grab bar

B-30919 B-30929

B-3091 B-3092

FORM NO.PMUH 3M Oct 2019 © BOBRICK WASHROOM EQUIPMENT, INC.

Patent PendingFor more information or to browse our full selection of stainless steel washroom accessories visit Bobrick.com

Traditional verticle units reduce the ADA required 1 ½" absolute clearance between the grab bar and the wall. Bobrick’s New Horizontal Combination Units provide a unique solution to achieve full compliance.

Full Compliance with Accessibility Codes

Model Mount Description

B-3091 Recessed Mounts on left.* Toilet Seat Cover Dispenser on right.**

B-3092 Recessed Mounts on right.* Toilet Seat Cover Dispenser on left.**

B-30919 Surface-Mounted Mounts on left.* Toilet Seat Cover Dispenser on right.**

B-30929 Surface-Mounted Mounts on right.* Toilet Seat Cover Dispenser on left.**

*Side determined when seated. **Side determined when facing unit.

(shown)