BMW 1200GS BMW 1250GS - coober.eu · BMW 1200GS BMW 1250GS. Remove - Injector and Ignition cover....
Transcript of BMW 1200GS BMW 1250GS - coober.eu · BMW 1200GS BMW 1250GS. Remove - Injector and Ignition cover....
-
BMW 1200GSBMW 1250GS
-
Remove
- Injector and Ignition cover
-
Remove
- Injector and Ignition cover
-
Remove
- Side Cover on Right Side
-
Remove
- Side Cover on Right Side
-
Route Harness
- TPS , Injection & Ignition Connect on Right side
Harness side with GND, TPS connection
-
Route Harness
- TPS , Injection & Ignition Connect on Right side
-
Route Harness
- TPS , Injection & Ignition Connect on Right side
-
Route Harness
- TPS , Injection & Ignition Connect on Right side
TPS
INJ 1
IGN 1
-
Route Harness
- Injection Connection
-
Route Harness
- Ignition Connection
-
Route Harness
- Ignition Connection
-
Location of the ECU
- Front Part of the Bike
-
Routing of the Harness
IGNITION
INJECTION
TPS
ECU
-
Routing of the Harness
-
Routing of the Harness
Fix harness to Frame
-
TPS
- Located on Right side. pull connector back
Press
-
TPS SIGNAL
- BLUE Wire (click on clamp)
Clamp BLUE wire trough here
-
GROUND
Connect Black wire to Battery Negative
-
GROUND
Connect Black wire to Battery Negative
-
Connect the ECU
-
WARNING
Fix the Harness and Connectors with zip tie
WARNING
Use Velcro Tape to fix the ECU
Connect the ECU
Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10Page 11Page 12Page 13Page 14Page 15Page 16Page 17Page 18Page 19Page 20Page 21Page 22