MODEL:CAB-31753

PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT

BLUETOOTH

PORTABLE

SPEAKER

32280070302161

2

DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an

equilateral triangle is intended to alert the user to the presence of uninsulated“dangerous voltage” within the product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock to persons.

ATTENTION: The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance (servicing)instructions in the literature accompanying the appliance.

CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THECOVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNITTO RAIN OR MOISTURE.

WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD. Thisunit has a long cord that can be easily tripped on or pulled on, causing injury. Please makesure it is arranged so that it will not drape over a tabletop, etc., where it can be pulled onby children or tripped over accidentally.

WARNING: To reduce the risk of fire or electric shock, do not

liquids, such as vases, shall not be placed on apparatus.

expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with

Before using the unit, be sure to read all operating instructions carefully. Please note thatthese are general precautions and may not pertain to your unit. For example, this unit maynot have the capability to be connected to an outdoor antenna.

1. Read these instructions – All the safety and operating instructions should be readbefore the appliance is operated.

2. Keep these instructions – The safety and operating instructions should be kept forfuture reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructionsshould be adhered to.

4. Follow all instructions – All operation and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water;

for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement,or near a swimming pool.

6. Clean only with dry cloth – The appliance should be cleaned only as recommendedby the manufacturer.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions. The appliance should be situated so that its location or position does notinterfere with its proper ventilation. For example, the appliance should not besituated on a bed, sofa, rug, or similar surface that may block the ventilationopenings; or placed in a built-in installation, such as a bookcase or cabinet that mayimpede the flow of air through the ventilation openings.

8. Do not install near any heat sources such as radiators, heat registers, stoves, orother apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug has two blades and a third grounding prong. The wide or the third prong areprovided for your safety. If the provided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments / accessories specified by the manufacturer.

3

12. Unplug this apparatus during lightning storms or when unused for long periods oftime.

13. Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped.

14. This appliance should not be exposed to dripping or splashing water and no objectfilled with liquids such as vases should be placed on the apparatus.

15. Power Sources – The appliance should be connected to a power supply only of thetype described in the operating instructions or as marked on the appliance. Do notoverload wall outlet.

16. Battery should not be exposed to excessive heat such as sunshine, fire, etc.17. Replace remote control battery only with the same or equivalent type.18. Do not attempt to dismantle, open or repair this product yourself. If a problem

occurs, seek advice from your local qualified service technician or contact thedistributor at the telephone number at the back of this instruction manual.

19. Caution marking and nameplate are located on back or bottom of product.

Back View

Side View

PAIR

1

2

3

4

5

6

7

8

9

1. Bluetooth (Blue LED) / AUX IN (Red LED) Indicator2. MIC Built-in Microphone3. Charging Indicator (Red LED)4. PLAY / PAUSE Receive call / Transfer call / End call PAIR Bluetooth pairing / Disconnect Bluetooth connection5. Volume Up / Next 6. Volume Down / Previous 7. POWER ON/OFF Switch8. AUX IN jack9. Charging Port

LOCATION OF CONTROLS

4

•

1. Connect the micro-USB plug into the DC IN jack on the unit.

NOTE:

2. Connect the USB plug into a USB port on a computer or a DC 5V USB power supply device.

During charging, the indicator light on the unit will turn red. Once the unit is fully charged, the indicator light will turn off.

•

•

•

When the battery is low, the unit will send a warning.

Charge the battery for at least 4 hours before the first time of use.

POWER SUPPLY

5

During playing

1. Press the button to pause playback. Press again to resume playback.

2. Press and hold the button to increase the volume, press and hold the button to decrease the volume. You can also adjust the volume on the device to which you are paired.

3. Press the button to skip to the next track. Press the button to skip to the previous track.

4. Play a track on your paired audio player or phone as normal.

2. Activate the bluetooth menu on the device you wish to connect to the speakers. Search for the speakers and pair with the main unit. The pairing name "CAB31753" will appear on your device. Select this and make the connection.

slowly.

FIRST TIME PAIRING-DEVICE TO SPEAKERS

Turning the speaker on/off1. Turn ON: Slide the ON/OFF switch to ON position. The

blue LED light will blink with an indication tone.2. Turn OFF: Slide the ON/OFF switch to OFF position. The

LED light will turn off.

Press and hold button to disconnect from your current Bluetooth device.

Disconnection

1. Switch on the speaker, the mode indicator will turn blue and blink.If AUX IN cable inserted, please pull it out of AUX IN jack.

PAIR

3. After successful connection, the speaker will send a tone, the BT/LINE indicator will blink

OPERATION

6

Notes:• Re-dialing function is unavailable if there is no dial record

feature in your mobile phone.• This unit will not operate or may operate improperly with

some Bluetooth mobile phones/audio players.• If the conversation is not clear, try to move closer to the

microphone.

IMPORTANT NOTICEAutomatic OFF modeIf no operation occurs in ON mode, the unit will automatically turn off after approx. 2 hours. To turn on the unit again, please follow the instructions mentioned in this instruction manual.

Receiving/Dialing a Phone CallThis unit is equipped with a built-in microphone, which allows you to make or end calls of a connected mobile phone through this unit. Make sure your Bluetooth-enabled mobile phone is paired with the unit. When there is an incoming call to the connected mobile phone, you will hear an incoming call alert tone from the unit.

1. Press the button answer the incoming call.2. Press the button again to end call.3. Press the button twice to reject the incoming call.4. To transfer the sound between the unit and the mobile

phone, press and hold the button during a call.5. To redial the last number retained in the memory of the

mobile phone, press the button twice.

7

Using the Aux in Jack1. Slide the ON/OFF switch to ON position to turn on the unit.2. Insert one end of Aux In cable (not included) into the Line

OUT or Headphone jack on your external audio unit and

3. Start playback of the external unit and the external audio

4. Adjust the volume to desired level.5. To stop playback, disconnect the Aux In cable from the Aux

In jack; the unit will switch to Bluetooth mode automatically.

the other end into the AUX IN jack of the unit, the unit willautomatically switch to AUX IN mode. The Bluetooth indi - cator will light solid red, indicating that the unit is in AUX IN mode.

device's output sound will be heard through the unit.

8

Should this unit exhibit a problem, check the following before seeking service:

No Power• Power is not on; Slide the ON/OFF switch to ON position

to turn on the unit.• Make sure the battery is recharged.

No Sound – General• External device’s volume is set to minimum; raise volume.

• The audio cable is plugged in. Unplug cable if not using Aux In function.

The Bluetooth device cannot pair or connect with the unit.• You have not activated the Bluetooth function of your

device. Refer to the user manual of your device to activate Bluetooth function.

• The unit is not in pairing mode. Turn off the Bluetooth functionality of other devices that were paired with your unit. Turn on the unit and re-enter the paring mode. If the unit is in Aux In mode, disconnect the Aux In cable from the Aux In jack to switch to Bluetooth mode automatically.

The unit's volume is set to minimum; raise volume. •

TROUBLESHOOTING GUIDE

9

GENERALOutput Power: 2x3W Dimensions: 170x 52 x 68mm

RECHARGEABLE BATTERYCharging voltage: DC 5V 500mAOperating Time: Approx. 6 hours at 50% volume after fully chargedCharging Time: Approx. 2 hours

BLUETOOTH Bluetooth Version: V4.1Working Distance: Up to 10 meters measured in open space (wall and structures may affect range of device)

Specifications are subject to change without notice.

This symbol indicates DC voltage

is a trademark on a registered trademark of BluetoothSIG Inc. All other trademarks and trade names are those of their respective owners.

SPECIFICATIONS

10

warranty CarD12 month warranty

Thank you for your purchase from Kmart.

Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.

Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.