Blueprint Controllers Product Profiles

Product Profiles ............................................................................................................................................................................................................................................ 3 Timers......................................................................................................................................................................................................................................................... 3-5 Cycle Timers ............................................................................................................................................................................................................................................. 5-7 Atmosphere Controllers .....................................................................................................................................................................................................................8-11 Lighting Hubs and Controllers ......................................................................................................................................................................................................12-14 Temperature Controllers ........................................................................................................................................................................................................................15 Fan Speed Controller ...............................................................................................................................................................................................................................16 CO2 Controllers ..................................................................................................................................................................................................................................16-18 CO2 Regulator ............................................................................................................................................................................................................................................18 CO2 Generators ..................................................................................................................................................................................................................................19-20 CO2 Monitor ..............................................................................................................................................................................................................................................21 Hygro-thermometers .............................................................................................................................................................................................................................21 Ozone Generator ......................................................................................................................................................................................................................................21

Grow Room Diagrams .......................................................................................................................................................................................................................22 4x4 .......................................................................................................................................................................................................................................................23-24 8x8 .......................................................................................................................................................................................................................................................25-26 20x20 .........................................................................................................................................................................................................................................................27 15x30 .........................................................................................................................................................................................................................................................28

Understanding CO2 Systems .....................................................................................................................................................................................................29 CO2 Injection ..............................................................................................................................................................................................................................................29 CO2 Generators .........................................................................................................................................................................................................................................30 CO2 Regulator Usage Chart ..................................................................................................................................................................................................................31

Welcome to Blueprint Controllers the Foundation for Automation

Blueprint Controllers instruments manage light, temperature, humidity and CO2 to create a high-performance indoor garden environment that operates on your terms. Combining reliable equipment with friendly and knowledgeable user support, the Blueprint Controllers brand takes atmospheric control beyond the product features to deliver the most important benefit of allthe priceless peace of mind that comes from knowing your garden is in good hands.

Not yet familiar with the Blueprint Controllers line? Need help determining which controller is right for your setup? In this guide, youll find detailed information about Blueprint Controllers products, including easy-to-understand diagrams illustrating the most common uses for each controller. Extensive specification charts compare devices side by side, so you can easily identify the model you need from a lineup of choices.

Explore grow room diagrams starting on page 22 to learn how multiple controllers function together to create a fully automated environment. In this section, six sample configurations show Blueprint Controllers devices at work in soil and hydroponic gardens of varying size. Each diagram also includes an in-depth list of optimal controller settings based on the specific application.

If youre getting started with supplemental CO2, take a look at the CO2 section on page 29 for an introductory comparison of CO2 generators versus CO2 injection. There youll learn the pros and cons of each method, plus find diagrams of both types of systems with recommended controllers for each.

Your biggest and best yields are waiting. Achieve them consistently with advanced automation technology from Blueprint Controllers. For a free digital copy of this guide, and for more resources and information on Blueprint Controllers products, visit us at blueprintcontrollers.com.

Table of Contents

2

Timers

Product Profiles

Mechanical Timers BMT-1 and BMT-2Blueprint Controllers 120-volt Mechanical Timers BMT-1 and BMT-2 are programmable in 15-minute increments on a full 24-hour dial with multiple on/off cycles possible. The BMT-1 features one outlet, while the BMT-2 features two outlets capable of accommodating up to two 600-watt lights or one 1,000-watt light system and a small fan or other device. A built-in switch on both units overrides the timer function for constant operation of the connected device(s) when needed.

Output Voltage: 120

Maximum LoadAmps: 15Watts: 1,875

Mechanical Timer BMT-8The Blueprint Controllers Mechanical Timer BMT-8 features eight receptaclesfour constantly powered and four that can be programmed in 15-minute increments via the 24-hour timer. A built-in switch also allows constant operation of all connected devices when needed. BMT-8 includes an integrated circuit breaker and a 6-foot power cord.

Output Voltage: 120


BMT-1

BMT-2W

A

R R A N

TY

YEAR1

WA

R R A N

TY

YEAR1

Ideal for: Timed operation of one or two HID light systems or timed operation of one or two H2O pumps in a flood and drain hydroponic setup.

Ideal for: Ventilation or irrigationincluding timed operation of four H2O pumps, plus constant operation of four O2 pumps, heaters, or other accessories in flood and drain hydroponic reservoirs.

H2O Pumps

H2O Pump H2O Pump

O2 Pumps

HID Reflector

Ba

lla

st

3

EZGrow Timer BET-1The 24-hour Blueprint Controllers EZGrow Timer BET-1 features dual receptacles, digital functionality and unique preprogrammed grow and bloom cycles. Once the time of day and cycle start time are set, simply select the Grow setting for a schedule of 18 hours on and 6 hours off, or select the Bloom setting to operate the connected device on a schedule of 12 hours on, 12 hours off. BET-1 includes a rechargeable NiMH battery in case of power loss.

Output Voltage: 120


WA

R R A N

TY

YEAR1

Ideal for: Simple, straightforward operation of an HID light system with preprogrammed cycles appropriate for most garden plants.

HID Reflector HID ReflectorB

all

ast

Ba

llast

Timers (continued)

Digital Timers BDT-1 and BDT-2Blueprint Controllers 120-volt Digital Timers, BDT-1 and BDT-2, are fully grounded, accurate, and 24-hour programmable with up to eight different on/off cycles per day and a cycle range of one minute to seven days. BDT-1 features one outlet; BDT-2 features two outlets. Each timer includes a rechargeable NiMH battery in case of power loss.

Output Voltage: 120


BDT-1

BDT-2

WA

R R A NT

YYEAR1

Ideal for: Timed operation of one or two HID light systems or one or two H2O pumps in a hydroponic system.

HID Reflector

Inline FanBa

lla

st

HID Reflector

Ba

lla

st

4

Analog DigitalBMT-1 BMT-2 BMT-8 BET-1 BDT-1 BDT-2 BDT-1C

# of Output Receptacles 1 2 8* 2 1 2 124-Hour Operation Y Y

Fixed Cycle Settings N Y: 18/6 or 12/12 hrs N

# of Unique Programmable Cycles variable variable variable 0 8/day 20/wkON Time Range 15 min - 24 hrs** 18 or 12 hrs 1 min - 7 daysOFF Time Range 15 min - 24 hrs** 6 or 12 hrs 1 min - 7 daysLED Status Indicator(s) Y N Y YBattery Backup N YInput Volts 120 - 125 120 - 125 115 - 120 240Maximum Amp Load 15 15Maximum Watts 1,875 1,875 1,725 3,600Hertz 60 60Warranty Term (years) 1 1

* Four timed outlets, four constantly powered outlets** Programmable in increments of 15 minutes

Product Comparison

Timers (continued)Digital Timer BDT-1CThe Blueprint Controllers 240-volt Digital Timer BDT-1C controls one device with up to 20 different on/off cycles per week. Additional features include countdown and randomize functions in addition to a switchable 24-hour or AM/PM time display. BDT-1C includes a rechargeable NiMH battery in case of power loss.

Output Voltage: 240


WA

R R A N

TY

YEAR1

Ideal for: Timed operation of one 240-volt HID light system.

HID Reflector

Ba

lla

st

Cycle TimersCycle Timer BCT-1The Blueprint Controllers Cycle Timer BCT-1 controls a pump, fan, CO2 regulator or other 120-volt device with adjustable on/off cycles. Precise timer set points facilitate an on time range of 15 seconds to 5 hours and an off time range of 15 seconds to 13 hours. Built-in photocell control allows day, night or 24-hour operation while LEDs indicate timer mode.

Output Voltage: 120

Maximum LoadAmps: 14.5Watts: 1,200 (lighting)

Ideal for: Timed operation of one H2O pump in a hydroponic system of any type ortimed operation of a CO2 regulator or generator.

H2O Pump

WA

R R A N

TY

YEAR3

5

Cycle Timers (continued)

Master Digital Timer BMDT-1The Blueprint Controllers Master Digital Timer BMDT-1 features dual timer functionality, separately controlling a recycle timer and a 24-hour lighting time clock. Its four receptacles power two lights up to 600 watts each, a recycling device and a night-only device. A remote sensor on a 3-foot cable accurately monitors temperature, triggering lighting deactivation at an adjustable temperature set point. Recycling on/off durations adjust from one second to 96 hours. BMDT-1 includes LED status indicators, lithium battery backup and an integrated circuit breaker.

Output Voltage: 120


Ideal for: Timed operation of two 600W HID lights, an H2O pump or a CO2 regulator (recycling), and a green LED light (night-only).

H2O Pump

Green LED

Ballast

Ballast

HID Reflector(600W)

HID Reflector(600W)

WA

R R A N

TY

YEAR3

Digital Cycle Timer BDCT-1The Blueprint Controllers Digital Cycle Timer BDCT-1 offers simple and precise control of one 120-volt device on a programmable on/off cycle. On and off durations are adjustable from one second to 168 hours, and a photocell facilitates separate day and night cycle settings. BDCT-1 features a digital clock with lithium battery backup in case of power loss.

Output Voltage: 120


Ideal for: Timed operation of a CO2 regulator or generator ortimed operation of one H2O pump in a hydroponic system requiring precision control, such as especially short or long cycles.

CO2 Generator

WA

R R A N

TY

YEAR3

6

See this controller in use on page 25.

Cycle Timers (continued)

Analog Digital

BCT-1 BMDT-1 BDCT-1 BDCT-2# of Output Receptacles 1 4 1 4

Day/Night/24-Hour Operation Y/Y/Y Y/Y/Y

Photocell Control Y N Y Y

Photocell Sensitivity (FC) 40 - 80 N/A 1 1

Separate Day/Night Set Points N N Y Y

Night Output Receptacle N Y N N

Fixed Cycle Settings N N

ON Time Range 15 sec - 5 hrs 1 sec - 96 hrs 1 sec - 168 hrs 1 sec - 96 hrs

OFF Time Range 15 sec - 13 hrs 1 sec - 96 hrs 1 sec - 168 hrs 1 sec - 96 hrs

Overheat Sensor N Y: adjustable N N

Remote Temperature Probe N Y: 3 N N

LED Status Indicators Y Y

Battery Backup N Y

Integrated Circuit Breaker N Y N Y

Input Volts 120 120

Maximum Amp Load 14.5 14.5

Maximum Watts 1,200 1,200

Hertz 60 50-60

Safety Certification ETL ETL

Warranty Term (years) 3 3

Product Comparison

Digital Cycle Timer BDCT-2The Blueprint Controllers Digital Cycle Timer BDCT-2 features two digital recycling timers, controlling four devices on repeating schedules with on/off cycles adjustable from one second to 96 hours. Each recycling timer controls two 120-volt receptacles with flip-flop functionality, so one output is always off while the other is on. Photocell control facilitates separate day and night cycle settings while LEDs indicate timer status. BDCT-2 includes lithium battery backup and an integrated circuit breaker.

Output Voltage: 120


Ideal for: Coordinating CO2 and ventilation in up to two areas orcoordinating lighting with night-only green LEDs.

CO2 Regulator

Inline Fan Inline Fan

CO2 Regulator

WA

R R A N

TY

YEAR3

7

Analog Atmosphere Controller BAAC-1The Blueprint Controllers Analog Atmosphere Controller BAAC-1 controls up to four 120-volt devices with dedicated receptacles for cooling, humidity, CO2 and night-only operation. The single-button display makes for easy programming, and three modes allow CO2, humidity and temperature to be controlled together or separately. Temperature control ranges from 41 to 113 degrees Fahrenheit with a 3 degree deadband; humidity control ranges from 5 to 95 percent relative humidity with a 5 percent deadband. BAAC-1 includes a remote sensor on a 15-foot cable, LED indicators and integrated circuit breaker protection.

Output Voltage: 120Maximum Amp Load: 14.5

Atmosphere Controllers

Ideal for: Coordinated operation of an A/C unit or ventilation fan; dehumidifier; CO2 regulator or generator (via a cycle timer); and heater in small- to medium-sized areas.

Inline Fan Heater

Dehumidifier

Cycle Timer

CO2 Regulator

WA

R R A N

TY

YEAR3

8

Atmosphere Controllers (continued)

Digital Atmosphere Controller BDAC-1The Blueprint Controllers Digital Atmosphere Controller BDAC-1 features four 120-volt receptacles to control cooling, humidity, CO2 and night-only devices. BDAC-1 facilitates coordinated and timed CO2 output, with an adjustable on duration ranging from one second to 12 hours and an off duration ranging from one second to 96 hours. The unit regulates temperature in a control range of 41 to 99.9 degrees Fahrenheit, and relative humidity in a range of 35 to 99.9 percent, both with adjustable deadbands. Photocell control allows separate day and night settings. BDAC-1 includes a remote sensor on a 15-foot cable, battery backup in case of power loss, and integrated circuit protection.


Ideal for: Digital coordination of an A/C unit or ventilation fan; dehumidifier; CO2 regulator or generator; and heater in small- to medium-sized areas.

Inline Fan Heater

Dehumidifier

CO2 Regulator

WA

R R A N

TY

YEAR3

9

Digital Atmosphere Controller BDAC-2The Blueprint Controllers Digital Atmosphere Controller BDAC-2 offers full control of the indoor garden environment, with four 120-volt receptacles for cooling, humidity, CO2 and heating devices. This advanced unit precisely monitors and manages CO2 in a range of 350 to 2,000 parts per million with an adjustable deadband, using fuzzy logic technology to provide even greater control in compressed CO2 setups. It regulates temperature in a control range of 41 to 99.9 degrees Fahrenheit, and relative humidity in a range of 35 to 99.9 percent, both with adjustable deadbands. Photocell control allows separate day and night settings. BDAC-2 includes a remote sensor on a 15-foot cable, and integrated circuit protection. Connect the BDAC-2 Auxiliary Cable and Adapter to enable remote monitoring, and control the unit via a PC with the software download. A 15-foot sensor extension cable is also available separately.



Inline Fan Heater

Dehumidifier

CO2 Regulator

PC Connection

Ideal for: Coordinated operation of an A/C unit or ventilation fan; dehumidifier; CO2 regulator or generator; and heater in small- to medium-sized areas. Offers the most complete and precise control in the atmosphere controller line.

Fuzzy logic control constantly analyzes the CO2 level to an exacting degree, quickly and frequently triggering the CO2 regulators solenoid valve to open and close. This precise action maintains CO2 ppm with minimal deviation from the programmed set point.

WA

R R A N

TY

YEAR3

10

See this controller in use on pages 24 and 26.

Analog DigitalBAAC-1 BDAC-1 BDAC-2

# of Output Receptacles 4 4

Photocell Control Y Y

Photocell Sensitivity (FC) 1 1

Separate Day/Night Set Points N Y

Night Output Receptacle Y Y N

Heating Output Receptacle N N Y

Tem

p Control Range (F) 41 - 113 40 - 99.9 40 - 99.9Accuracy (F) 1 1 1

Deadband (F) 3 adjustable: 0 - 36.5 adjustable: 0 - 36.5

Hum

idity Control Range (%RH) 5 - 95 35 - 99.9 35 - 99.9

Accuracy (%RH) 3 3 3

Deadband (%RH) 5 adjustable: 2 - 20 adjustable: 2 - 20

CO

2

Coordinated Ventilation Y Y

Cycle Timer N Y N

ON Range N/A 1 sec - 12 hrs N/A

OFF Range N/A 1 sec - 96 hrs N/A

Fuzzy Logic Mode N N Y

Control Range (ppm) N/A N/A 350 - 2,000

Accuracy (ppm) N/A N/A 75

Deadband N/A N/A adjustable: 25 - 200


Remote Sensor Probe Y: 15 Y: 15 Y: 15

Battery Backup N Y N

Integrated Circuit Breaker Y Y

Remote Control via PC Option N N Y

Input Volts 120 120


Hertz 60 60



Product Comparison


11

Lighting Hubs and Controllers

HID Hubs HUB-4 and HUB-8Blueprint Controllers HID Hubs act as the nucleus of a large grow room, centralizing lighting control to run a network of HID ballasts on a synchronized schedule. Featuring four and eight universal receptacles, respectively, the HUB-4 and HUB-8 coordinate up to four and eight HID ballasts of up to 1,000 watts each. An integrated trigger cable connects to any 120-volt timer to operate the ballasts on a timed lighting sequence. HID hubs require hardwiring into a 120-volt or 240-volt power source; recommended and most efficient setup is 240-volt. Ballasts must be of the same voltage as the power source. The HUB-4 and HUB-8 are wall-mountable.

Output Voltage: Universal (120/240)

Maximum Amp LoadHUB-4: 30HUB-8: 50

WA

R R A N

TY

YEAR3HUB-4

HUB-8

Ideal for: Coordinated operation of multiple HID lighting systems of up to 1,000 watts each, with flexibility for converting to a different voltage setup.

1000W240V

1000W240V

1000W240V

1000W240V

Ballast Ballast

Ballast Ballast

Timer

HID Hubs HUB-4C and HUB-8CBlueprint Controllers HID Hubs HUB-4C and HUB-8C offer the same functionality as the HUB-4 and HUB-8, but are designed specifically for use with 240-volt ballasts. These units require hardwiring to a 240-volt power source.

Output Voltage: 240

Maximum Amp LoadHUB-4C: 30HUB-8C: 50

WA

R R A N

TY

YEAR3HUB-4C

HUB-8C

Ideal for: Coordinated operation of multiple 240-volt HID lighting systems of up to 1,000 watts each.

12

See the HUB-8 in use on page 27.

Timer

Lighting Hubs and Controllers (continued)

Heavy-Duty HID Hubs HUB-8HD and HUB-12HDBlueprint Controllers Heavy-Duty HID Hubs HUB-8HD and HUB-12HD are designed to handle the demands of multiple high-wattage lighting systems in larger growing areas. The HUB-8HD and HUB-12HD simultaneously operate up to eight and twelve 240-volt ballasts, respectively, of up to 1,000 watts each. A built-in trigger cable on each unit connects a 120-volt timer to run all ballasts and any device connected to the additional 120-volt auxiliary outlet on a customized schedule. Other heavy-duty upgrades include a five-minute ignition delay on each bank of four outlets, an integrated external circuit breaker and durable metal housing. These wall-mountable units feature easy-to-access terminals for hardwiring and are designed for 240-volt applications, however 120-volt input for 120-volt ballast operation is possible.

Output Voltage: Universal (120/240)

Maximum Amp LoadHUB-8HD: 50

HUB-12HD: 70

WA

R R A N

TY

YEAR3HUB-8HD

HUB-12HD

Ideal for: Coordinated operation of multiple 240-volt HID lighting systems of up to 1,000 watts each, in a high-demand growing area where additional safety and performance features are desired.

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

Ballast Ballast

Ballast Ballast

Ballast Ballast

Ballast Ballast

Inline Fan

13

See the HUB-12HD in use on page 28.

Lighting Hubs and Controllers, (continued)

Digital Lighting Controller BDLC-1The Blueprint Controllers Digital Lighting Controller BDLC-1 allows simple push-button control of up to 1,200 watts of 120-volt lighting equipment. Adjustable high-temperature shutdown and hot-start prevention safeguard lighting system components. The BDLC-1 features a precise digital timing clock with lithium battery backup, and a remote sensor on a 6.5-foot cable accurately monitors temperature.


Ideal for: Timed operation of one HID lighting system, with added safety features especially beneficial for magnetic ballasts.

HID Reflector

WA

R R A N

TY

YEAR3

Standard Heavy-DutyHUB-4 HUB-4C HUB-8 HUB-8C HUB-8HD HUB-12HD

# of Output Receptacles 4: universal 4: NEMA 6-15 8: universal 8: NEMA 6-15 8: universal 12: universal

LED Status Indicator(s) Y Y

Auxiliary 120V Outlet N Y

Trigger Cable Volts 120 120

Main Circuit Breaker/Wire Required 30A/#10AWG@240V 30A/#10AWG50A/#6

AWG@240V 50A/#6AWG50A/#6

AWG@240V70A/#4

AWG@240V

Integrated Circuit Breaker N Y

Main Power Volts 120/240 240 120/240 240 120/240 120/240

# of Relays 1 1 2 2 2 3

Maximum Amp Load per Relay 30@120V 30@240V 3030A@120V30A@240V 30 30@120V 30@240V

Maximum Total Amp Load 20@120V30@240V 3020@120V 50@240V 60

20A@120V50A@240V

20A@120V70A@240V

Maximum Watts 2,000@120V 4,000@240V 4,0002,000@120V8,000@240V 8,000

2,000@120V8,000@240V

2,000@120V12,000@240V

Hertz 60 60

Operating Temperature Range (F) 32 - 110 32 - 110

Operating Humidity Range (%RH) 0 - 99 0 - 99Minimum Relay Operations (@ full load) 100,000 100,000


Important: - Ballasts operated on these units must have the same voltage rating as the main power source, e.g. 120V ballasts can only be operated on a HUB that is wired to a 120V power source.- For continuous load circuits (such as with HID ballasts), the total amperage draw should not exceed 80 percent of the circuit breaker or contactor amperage rating.

Product Comparison

Ba

lla

st

14

Digital Day/Night Temperature Controller BDTC-1The Blueprint Controllers Digital Day/Night Temperature Controller BDTC-1 allows simple push-button control of a 120-volt heating or cooling device. Adjustable set points facilitate temperature control from 32 to 150 degrees Fahrenheit with an accuracy of 0.9 degree and an adjustable deadband. A remote sensor on a 6.5-foot cable accurately measures temperature, and an integrated photocell allows separate day and night settings. BDTC-1 stores maximum and minimum readings for later retrieval.


Ideal for: Precise, digitally controlled operation of a ventilation fan, limiting the loss of desired heat or CO2.

WA

R R A N

TY

YEAR3Inline Fan

Temperature ControllersDay/Night Temperature Controller BTC-1The Blueprint Controllers Day/Night Temperature Controller BTC-1 controls a 120-volt heating or cooling device. An accurate temperature sensor and adjustable set points facilitate temperature control from 45 to 95 degrees Fahrenheit with an accuracy of 1.5 degree and a 3-degree deadband. Photocell control allows separate day and night temperature settings while LEDs indicate controller mode.


Ideal for: Controlled operation of a ventilation fan, limiting the loss of desired heat or CO2.

WA

R R A N

TY

YEAR3Inline Fan

Analog DigitalBTC-1 BDTC-1

# of Output Receptacles 1 1


Photocell Sensitivity (FC) 40 - 80 1

Separate Day/Night Set Points Y Y

Control Range (F) 45 - 95 32 - 150

Accuracy (F) 1.5 0.9

Deadband (F) 3 adjustable: 1 - 10

Stores Min./Max. Values N Y


Remote Sensor Probe N Y: 6.5

Input Volts 120 120


Hertz 50 - 60 50 - 60



Product Comparison

15

CO2 Controllers

CO2 Controller BCC-1The Blueprint Controllers CO2 Controller BCC-1 controls a 120-volt CO2-emitting device with adjustable set points ranging from 400 to 2,500 parts per million, an accuracy of 60 ppm and an adjustable deadband. Photocell control deactivates CO2 production when lights are off, and a remote sensor on a 15-foot cable accurately monitors the CO2 level at plant height. LEDs indicate controller mode.


WA

R R A N

TY

YEAR3

Ideal for: Efficient operation of a CO2 regulator or generator, with basic functionality.

CO2

CO2 Regulator

Fan Speed Controller

Fan Speed Controller FSC-1The Blueprint Controllers Fan Speed Controller FSC-1 provides variable speed control for a connected 120-volt ventilation fan. Simply select the desired fan speed using the adjustable knob.

Output Voltage: 120Maximum Amp Load: 15

WA

R R A N

TY

YEAR1

Ideal for: Adjusting the output of a ventilation fan.

Inline Fan

16

CO2 Controllers (continued)

Digital CO2 Controller BDCC-1The Blueprint Controllers Digital CO2 Controller BDCC-1 provides advanced control of a 120-volt CO2-generating device. Adjustable CO2 set points range from 350 to 2,000 parts per million with an accuracy of 50 ppm and an adjustable deadband. A remote sensor on a 15-foot cable accurate monitors CO2 when positioned at plant height, and fuzzy logic mode facilitates even more precise control when using compressed CO2. Photocell control with adjustable sensitivity allows customizable day, night or continuous operation while LEDs indicate controller mode. BDCC-1 also features an integrated circuit breaker and records maximum and minimum values for later viewing. A 15-foot sensor extension cable (for a total cable length of 30 feet) is also available separately.


Ideal for: Precise operation of one CO2-generating device, with advanced functionality for compressed CO2.

Fuzzy logic control constantly analyzes the CO2 level to an exacting degree, quickly and frequently triggering the CO2 regulators solenoid valve to open and close. This precise action maintains CO2 ppm with minimal deviation from the programmed set point.

CO2

CO2 Regulator

WA

R R A N

TY

YEAR3

Compact Digital CO2 Controller BCDCC-1The Blueprint Controllers Compact Digital CO2 Controller BCDCC-1 provides simple and precise control of a 120-volt CO2-generating device or an exhaust fan with modes for both increasing and decreasing CO2. Adjustable set points range from 350 to 2,500 parts per million with an accuracy of 75 ppm and an adjustable deadband, while a remote sensor on a 16-foot cable accurately monitors CO2 levels. An integrated photocell allows day, night or continuous operation, and the unit records maximum and minimum values for later viewing.


Ideal for: Digital operation of one CO2 regulator, CO2 generator or exhaust fan.

CO2 Generator

WA

R R A N

TY

YEAR3

17

Analog Digital

BCC-1 BCDCC-1 BDCC-1# of Output Receptacles 1 1

Increase CO2 Mode Y Y

Decrease CO2 Mode N Y


Photocell Sensitivity (FC) 1 1

Day/Night/24-Hour Operation Y/N/N Y/Y/Y

Sensor Type NDIR NDIR

Control Range (ppm) 400 - 2,500 350 - 2,500 350 - 2,000

Accuracy (ppm) 60 75 50

Deadband (ppm) adjustable: 50 - 250 adjustable: 50 - 250 adjustable: 50 - 250

Fuzzy Logic Mode N N Y

Stores Min./Max. Values N Y


Remote Sensor Probe Y: 15 Y: 16 Y: 15

Integrated Circuit Breaker N N Y

Input Volts 120 120


Hertz 50 - 60 50 - 60



Product Comparison

CO2 Regulator

WA

R R A N

TY

YEAR3CO2 Regulator BCR-1The Blueprint Controllers CO2 Regulator BCR-1 attaches to a CO2 tank to adjust the flow of CO2 between zero and 25 liters per minute (zero to 15 cubic feet per hour). Compatible with CGA320 tank fittings, this 120-volt regulator features reliable solenoid valve operation and a tank pressure gauge. The BCR-1 includes 10 feet of perforated 3/16-inch-ID tubing and two O-ring washers. Additional CO2 tubing is also available separately.


Ideal for: CO2 supplementation using compressed CO2 and a CO2 controller or cycle timer.

18

CO2

CO2 Controllers (continued)

CO2 Generators

Liquid Propane CO2 GeneratorsBlueprint Controllers CO2 Generators convert liquid propane (LP) into supplemental carbon dioxide for accelerated plant growth. CGLP-2, CGLP-4 and CGLP-8 feature two, four and eight brass burners, respectively, with included burner plugs allowing output modification. The 10-burner CGLP-10 offers enhanced functionality with convenient selector switches operating two, six, or all 10 burners at a time. A full range of safety features ensures reliable operationelectronic ignition replaces an open pilot flame, dual solenoid values restrict gas if the burners do not ignite, and a tip-over switch cuts the gas supply if the unit is not upright. Integrated LEDs also indicate operational status. Each model comes complete with a gas regulator, 12-foot hose, power adapter and hanging hardware. Replacement regulators, hose, burners and plugs are also available separately.

Ideal for: CO2 supplementation in a temperature-controlled growing area where liquid propane is the gas source; use with a CO2 controller or cycle timer.

Natural Gas CO2 GeneratorsBlueprint Controllers CO2 Generators offer the same functionality as liquid propane units, but instead convert natural gas (NG) into supplemental carbon dioxide. Replacement regulators, hose, burners and plugs are also available separately.

Ideal for: CO2 supplementation in a temperature-controlled growing area where natural gas is the gas source; use with a CO2 controller or cycle timer.

High-Altitude CO2 GeneratorsBlueprint Controllers High-Altitude CO2 Generators facilitate the use of supplemental CO2 in growing areas located more than 4,500 feet above sea level. Available in four- and eight-burner models only. Replacement regulators, hose, burners and plugs are also available separately.

Ideal for: CO2 supplementation in high-altitude locations; use with a CO2 controller or cycle timer.

WA

R R A N

TY

YEAR3CGLP-4H CGNG-10CGNG-8H

CO2 Controller

19

CO2 Generators (continued)

Natural Gas (NG)Standard High Altitude

CGNG-2 CGNG-4 CGNG-8 CGNG-10 CGNG-4H CGNG-8H

# of Burners 2 4 8 10 4 8

Variable Output Control Switches N N N Y N N

Modifiable Output (removable burners) Y

Maximum Area Size (cu ft) 2,000 4,000 8,000 10,000 4,000 8,000

Maximum CO2 Output (cu ft/hr) 5.4 10.8 21.6 27.7 9.6 19.2

BTU Rating (@ full capacity) 5,534 11,068 22,136 27,670 9,820 19,640

Electronic Ignition Y

Dual Solenoid Valves Y

Tip-over Switch Y

LED Status Indicators Y

Gas Hose Y: 12

Pressure Regulator Y

Gas Pressure (psi) 0.25

Input Volts (with 24-VDC power adapter) 120

Amps 1.5

Hertz 60

Dimensions (inches) 9 x 10 x 18 15 x 8.5 x 18 15 x 9.88 x 18 15 x 9.88 x 18 15 x 8.5 x 18 15 x 9.88 x 18

Warranty Term (years) 3

Liquid Propane (LP)Standard High Altitude

CGLP-2 CGLP-4 CGLP-8 CGLP-10 CGLP-4H CGLP-8H

# of Burners 2 4 8 10 4 8

Variable Output Control Switches N N N Y N N

Modifiable Output (removable burners) Y

Maximum Area Size (cu ft) 2,000 4,000 8,000 10,000 4,000 8,000

Maximum CO2 Output (cu ft/hr) 5.3 10.6 21.2 26.5 8.4 16.7

BTU Rating (@ full capacity) 4,526 9.052 18,104 22,630 7,152 14,304

Electronic Ignition Y

Dual Solenoid Valves Y

Tip-over Switch Y

LED Status Indicators Y

Gas Hose Y: 12

Pressure Regulator Y

Gas Pressure (psi) 0.5

Input Volts (with 24-VDC power adapter) 120

Amps 1.5

Hertz 60

Dimensions (inches) 9 x 10 x 18 15 x 8.5 x 18 15 x 9.88 x 18 15 x 9.88 x 18 15 x 8.5 x 18 15 x 9.88 x 18

Warranty Term (years) 3

Product Comparison

Product Comparison

20

Ozone GeneratorOzone Generator BOZ-1The Blueprint Controllers Ozone Generator BOZ-1 eliminates odors using ultraviolet light to change the molecular composition of pollutants in the air. The wall-mountable, 120-volt BOZ-1 is powerful enough to keep a 5,500-cubic-foot area smelling fresh. Use with a timer to reduce the risk of overexposure. Replacement bulbs are available separately.

Ideal for: Odor control in growing areas unoccupied by people and pets.

Hygro-ThermometersBDHT-L

Digital Hygro-Thermometers BDHT-S and BDHT-LThe Blueprint Controllers Digital Hygro-Thermometers BDHT-S and BDHT-L offer a convenient, at-a-glance view of climate conditions in growing areas. Easy-to-read small and large models display indoor temperature and humidity, in addition to a second-zone or outdoor temperature reading taken via a remote sensor probe on a 9.75-foot cable. Suitable for wall-mounting or tabletop use, BDHT-S and BDHT-L store maximum and minimum values for later viewing and feature a switchable Fahrenheit or Celsius display. Each model includes a replaceable battery.

BDHT-S

WA

R R A NT

Y

YEAR1

Ideal for: General monitoring of growing area temperature and humidity.

CO2 MonitorCO2 Monitor BCMThe Blueprint Controllers CO2 Monitor BCM monitors CO2 from 0 to 3,000 parts per million, temperature from 32 to 122 degrees Fahrenheit, and relative humidity from 20 to 80 percent to help ensure ideal conditions for plant growth. A built-in data logger records values every 30 minutes up to 24 hours and stores minimum and maximum values for later viewing. Two visual alarms indicate when the CO2 level falls outside the programmed range.

WA

R R A N

TY

YEAR1

Ideal for: Tracking CO2 levels when using a cycle timer to regulate CO2 production.

21

Grow Room DiagramsImportantRead This First:

The diagrams shown are intended as examples only. All products portrayed in these sample diagrams, alone and in combination, are shown for the purpose of illustrating only a few of many possible applications. The most appropriate controllers and equipment for an individual grow room will be determined by a variety of factors, including but not limited to: grow room infrastructure, voltage and available amperage, and ambient environmental conditions.

Always consider the requirements and limitations of a particular area before choosing equipment. Never use equipment that exceeds the amperage limit of a connected controller or the grow room wiring.

Controller and timer settings are provided as examples of possible configurations only. The appropriate and most efficient settings for any individual grow room will vary. For controller settings not specified, the factory default setting is appropriate.

Central air conditioning, while not represented in these diagrams, can be used as a method of climate control where available.

When using supplemental CO2, sealed room setups are always superior to external ventilation. No matter how well coordinated, ventilation will result in some CO2 loss.

Visit blueprintcontrollers.com for more valuable resources.

New products Product Guide Instructions Specification charts CO2 conversion chart Helpful videos Store locator

22

Room Dimensions Lighting4 x 4 x 8 600W air cooled HID light system

Timers Connection Settings

BMT-1 Mechanical Timer H20 pump

15 minutes on, 1 hour 45 minutes off, daytime only

BET-1 EZ-Grow Timer 6 inline fan Grow

Environmental BDHT-S Hygro-Thermometer BCM-1 CO2 Monitor

Misc. EnvironmentalOscillating fan

8

4

4

ExhaustAir Flow

Air Intake

H20 Pump

Oscillating Fan

BMT-1

BCM-1

Ballast (600W)

BET-1

HID Reflector

I

n

l

i

n

e

F

a

n

BDHT-S

23

Air Cooled Room Hydroponic GardenA basic setup with a passive air intake, ventilation through the HID reflector to the outdoors, and a flood and drain hydroponic system. A hygro-thermometer and CO2 monitor track climate conditions.

Room Dimensions Lighting4 x 4 x 8 600W open hood HID light system

Timers Connection SettingsBDT-1

Digital Timer 600W ballast18 hours on,6 hours off

BDCT-1Digital Cycle Timer H2O pump

1 minute on,5 minutes off

Misc. Environmental Inline fan with carbon filter Oscillating fan

Controllers Connections SettingsBCR-1

CO2 RegulatorOscillating fan Flow rate on 2 cfh

BDAC-2Digital Atmosphere

Controller

A/C CO2 Heater Dehumidifier

Day Temperature on 78F Night Temperature on 68F CO2 on 1,500 ppm (daytime only) Fuzzy logic mode Temp/Humidity Lock on split mode Temp/CO2 Lock on split mode

4

8

4

BDCT-1

BCR-1

BDT-1

BDAC-2

A/C

CO2

Heater

HID ReflectorBallast (600W)

Dehu

midifier

Inline Fan/Carbon Filter

Oscillating Fan

H20 Pump

24

Sealed RoomHydroponic GardenA slightly more complex setup in a sealed room. The air conditioner, heater and dehumidifier are small units not exceeding the maximum amperage load of the BDAC-2. To scrub the air of impurities and odors, a dedicated inline fan pulls air through a suspended carbon filter.

Room Dimensions Lighting

8 x 8 x 8 2x 600W open hood HID light systems Green LED

Timers Connections Settings

BMDT-1Master

Digital Timer

2x 600W ballasts Green LED CO2 Regulator

Lights 18 hours on, 6 hours off Green LED on night only Recycling output (CO2) 6 minutes 50 seconds on, 1 hour off Timer on continuous mode Day/Night/24hr on daytime mode

Controllers Connection SettingsBCR-1

CO2 RegulatorCO2 tank Flow rate on 5 cfh

Environmental BCM-1 CO2 Monitor BDHT-L Digital Hygro-Thermometer Large

Misc. Environmental SettingsPortable A/C 78F Inline fan with carbon filter Oscillating fan

BCR-1

BMDT-1

Green LED

BCM-1

BDHT-L

8

8

8

HID Reflector

Ballast (600W)

Ballast (600W)

I

n

l

i

n

e

F

a

n

/

C

a

r

b

o

n

F

i

l

t

e

r

CO2P

o

r

t

a

b

l

e

A

/

C

Oscillating Fan

HID Reflector

25

Sealed Room Soil GardenA mid-size grow room illustrates the functionality of the BMDT-1 with two 600W lights, compressed CO2 running on the recycle timer, and a green LED which is constantly on while the HID lights are off. A portable air conditioner connects to the outdoors to bring fresh air into the grow room.

Depending on environmental conditions, this setup may also benefit from the addition of a dehumidifier.

CO2

ExhaustAir Flow

BDAC-2

Air Intake

Inline Fan/Carbon FilterH

eate

r

8

8

8

Ballast (600W) Ballast (600W)

HID ReflectorHID Reflector

Oscillating Fan

Dehu

mid

ifie

r

BCR-1

Inlin

e Fan

BET-1

Room Dimensions Lighting

8 x 8 x 8 2x 600W air cooled HID light systems

Timers Connections SettingsBET-1

EZGrow Timer2x 600W ballasts 18 hours on, 6 hours off

Controllers Connections Settings

BDAC-2Digital

Atmosphere Controller

CO2 Regulator Heater Dehumidifier Inline fan

Day Temperature on 78F Night Temperature on 68F CO2 on 1,500 ppm Fuzzy logic mode Temp/humidity Lock on split mode Temp/CO2 Lock on locked mode

BCR-1CO2 Regulator

CO2 tank Flow rate on 5 cfh

Misc. Environmental Inline fan with carbon filter Oscillating fan

26

Air Cooled Room Soil GardenAn air cooled room that makes full use of the BDAC-2s coordination capabilities. Compressed CO2, a heater and a dehumidifier are coordinated with an inline fan to maintain climate conditions and minimize lost CO2 in the absence of an A/C unit.

Exhaust

Exhaust

Overhead view

Intake

Intake

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

Dehumidifier

HU

B-8

CGLP-8 BDCC-1

Inlin

e Fan

Inlin

e Fan

1000W240V

1000W240V

BET

-1


BET-1

20

10

20

Room Dimensions Lighting20 x 20 x 10 2x 600W air cooled HID light systems


EZGrow Timer Inline fans Grow

BET-1EZGrow Timer

HUB-8 HID Hub, 8 Site Grow

Controllers Connections SettingsHUB-8 HID Hub,

8 Site8x 1000W ballasts via BET-1

BDCC-1Digital CO2 Controller

CGLP-8 Liquid Propane CO2

Generator

CO2 on 1,500 ppm CO2 function on Daytime CO2 mode on Increase Fuzzy Logic setting on generator mode

Misc. Environmental SettingsDehumidifier 70%Air conditioner 78F Inline fan with carbon filter Oscillating fans

27

Air Cooled Room with A/C | Soil GardenTwo inline fans cool eight HID lights with outdoor air in a closed ventilation system, while an air conditioner and dehumidifier maintain temperature and humidity in the growing area. Oscillating fans help disperse CO2 emitted by a liquid propane CO2 generator.

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

1000W240V

Dehumidifier

A/C

HU

B-1

2HD

CGNG-4

CGNG-4

BET

-1


BCDCC-1

BCDCC-1

H2O Pump

BDT-1

BDHT-L

30

15

10Overhead view

Room Dimensions Lighting15 x 30 x 10 12x 600W open hood HID light systems


EZGrow TimerHUB-12HD HID

Hub, 12 Site Grow

BDT-1Digital Timer H20 pump

15 minutes on, 1 hour 45 minutes

hours off, daytime only

Controllers Connections SettingsHUB-12HD HID

Hub, 12 Site12x 1000W

ballasts via BET-1

2x BCDCC-1Compact Digital CO2 Controllers

2x CGNG-4 Natural Gas CO2

Generators

CO2 ppm on 1,500 CO2 mode on Increase Photocell on daytime mode

Misc. Environmental SettingsDehumidifier 75%Air conditioner 78F Inline fan with carbon filter Oscillating fans

28

Sealed Room | Hydroponic GardenAn environmentally controlled, streamlined setup with twelve lights on a HUB-12HD. Two CO2 generators on either side of the room help distribute CO2 evenly over a large area. One large sump pump and central reservoir feeds all flood and drain hydroponic tables.

Understanding CO2 SystemsFor serious indoor growers who crave accelerated growth cycles and aggressive yields, supplemental carbon dioxide (CO2) is a grow room essential. CO2-enriched environments produce plants with lush foliage, increased branching and more plentiful flowers. The air we breathe contains about 300 to 400 parts per million (ppm) of CO2; plants grown in carbon dioxide levels between 1,200 to 1,500 ppm can grow two to three times faster than those grown without the extra CO2.

Blueprint Controllers offers equipment for the two main types of CO2 systems used in indoor gardens: CO2 injection, and CO2 generators supplied by liquid propane or natural gas. Each method has pros and cons.

CO2 InjectionMore common in smaller grow rooms, CO2 injection systems use compressed CO2, available in tanks (or bottles) in a range of sizes. Many growers keep a backup tank or more on hand to use while empties are being refilled.

Managed by a regulator (BCR-1) and a cycle timer or CO2 controller, CO2 injection systems use a solenoid valve to quickly activate and deactivate CO2 production. This method offers precise maintenance of CO2 levels, and even greater efficiency becomes possible when using a controller equipped with fuzzy logic technology.

Another major benefit of CO2 injection is that there are no byproducts which must be addressed, whereas heat, water and carbon monoxide are all potential byproducts of a CO2 generator. Compressed CO2 can be more expensive than operating a CO2 generator, however, making it an impractical choice for large areas.

A basic CO2 injection setup:

In this typical configuration, CO2 tubing leads from the regulator to the back of an oscillating fan which helps distribute the CO2 evenly over the plant canopy. A CO2 controller operates the solenoid valve of the regulator to maintain CO2 at a precise set point.

Remote sensor

CO2Tubing CO2

BDCC-1

BCR-1

Oscillating Fan

A Word on VentilationFor any CO2 system to be efficient and effective, its important to seal the room completely. Open or drafty windows, leaks, or other exchanges of outside air may result in CO2 loss. If exhausting air to the outdoors is unavoidable, use an atmosphere controller to coordinate CO2 production with ventilation. This will prevent the two systems from running simultaneously and exhausting CO2 before it reaches the plants.

Recommended controllers for CO2 injection: BDAC-2, BDCC-1

29

CO2 GeneratorsPopular for larger grow rooms, CO2 generators burn liquid propane or natural gas to create CO2 via combustion. Generators range in size based on the number of burners they contain. Each burner generates a specific amount of CO2: the more burners, the higher the output. Many generators also include the option to disable or remove individual burners, reducing the amount of CO2 produced.

Spacing out multiple generators where feasible is preferable to using only one large unit. This helps to evenly distribute CO2 over the plant canopy and avoids creating hot spots of excessive CO2 concentration. Adequate air circulation is also imperative with the use of CO2 generators. Strategically placed oscillating, floor or wall fans assist in dispersing CO2 and dissipate the heat units generate while operating.

In addition to heat, the combustion process generates water which takes the form of moisture in the air. Grow room humidity must therefore be monitored closely to avoid problems with fungus and disease. And, while most CO2 generators include redundant safety features to prevent malfunction or improper operation, it is important to keep in mind that the incomplete burning of fossil fuels can produce deadly carbon monoxide. A carbon monoxide detector in the grow area is recommended as a precaution.

Heat and moisture can usually be easily addressed with the proper climate control equipment, and obtaining fuel for CO2 generators is generally more economical than compressed CO2, especially in large quantity. This makes CO2 generator systems the preferred choice of commercial growers and mid- to large-scale hobby growers.

A basic CO2 generator setup:

In this configuration, a CO2 controller powers the CO2 generator on and off, while a wall fan helps circulate air and disperse CO2.

Liquid propane or natural gas tank

Remote sensor

BDCC-1

Oscillating Fan

Outdoors Indoors

CO2 Generator

Recommended controllers for CO2 generators: BDAC-1, BDCC-1, BCDCC-1

30

CO2 Regulator Flow Rate (cu ft/hr)1 13.2 19 25.9 33.8 42.8 52.8 63.9 76 89.2 103.5 118.8 211.2

2 6.6 9.5 12.9 16.9 21.4 26.4 31.9 38 44.6 51.7 59.4 105.6

3 4.4 6.3 8.6 11.3 14.3 17.6 21.3 25.3 29.7 34.5 39.6 70.4

4 3.3 4.8 6.5 8.4 10.7 13.2 16 19 22.3 25.9 29.7 52.8

5 2.6 3.8 5.2 6.8 8.6 10.6 12.8 15.2 17.8 20.7 23.8 42.2

6 2.2 3.2 4.3 5.6 7.1 8.8 10.6 12.7 14.9 17.2 19.8 35.2

7 1.9 2.7 3.7 4.8 6.1 7.5 9.1 10.9 12.7 14.8 17 30.2

8 1.7 2.4 3.2 4.2 5.3 6.6 8 9.5 11.2 12.9 14.9 26.4

9 1.5 2.1 2.9 3.8 4.8 5.9 7.1 8.4 9.9 11.5 13.2 23.5

10 1.3 1.9 2.6 3.4 4.3 5.3 6.4 7.6 8.9 10.3 11.9 21.1

11 1.2 1.7 2.4 3.1 3.9 4.8 5.8 6.9 8.1 9.4 10.8 19.2

12 1.1 1.6 2.2 2.8 3.6 4.4 5.3 6.3 7.4 8.6 9.9 17.6

13 1 1.5 2 2.6 3.3 4.1 4.9 5.8 6.9 8 9.1 16.2

14 0.9 1.4 1.8 2.4 3.1 3.8 4.6 5.4 6.4 7.4 8.5 15.1

15 0.9 1.3 1.7 2.3 2.9 3.5 4.3 5.1 5.9 6.9 7.9 14.1

5x5x8 6x6x8 7x7x8 8x8x8 9x9x8 10x10x8 11x11x8 12x12x8 13x13x8 14x14x8 15x15x8 20x20x8

Room Dimensions (ft)

CO2 Regulator Flow Rate (L/min)1 6.2 9.0 12.2 16.0 20.2 24.9 30.2 35.9 42.1 48.8 56.1 99.7

2 3.1 4.5 6.1 8.0 10.1 12.5 15.1 17.9 21.0 24.4 28.0 49.8

3 2.1 3.0 4.1 5.3 6.7 8.3 10.1 11.9 14.0 16.3 18.7 33.2

4 1.6 2.3 3.1 4.0 5.1 6.2 7.6 9.0 10.5 12.2 14.0 24.9

5 1.2 1.8 2.5 3.2 4.1 5.0 6.0 7.2 8.4 9.8 11.2 19.9

6 1.0 1.5 2.0 2.6 3.4 4.2 5.0 6.0 7.0 8.1 9.3 16.6

7 0.9 1.3 1.7 2.3 2.9 3.5 4.3 5.1 6.0 7.0 8.0 14.3

8 0.8 1.1 1.5 2.0 2.5 3.1 3.8 4.5 5.3 6.1 7.0 12.5

9 0.7 1.0 1.4 1.8 2.3 2.8 3.4 4.0 4.7 5.4 6.2 11.1

10 0.6 0.9 1.2 1.6 2.0 2.5 3.0 3.6 4.2 4.9 5.6 10.0

11 0.6 0.8 1.1 1.5 1.8 2.3 2.7 3.3 3.8 4.4 5.1 9.1

12 0.5 0.8 1.0 1.3 1.7 2.1 2.5 3.0 3.5 4.1 4.7 8.3

13 0.5 0.7 0.9 1.2 1.6 1.9 2.3 2.7 3.3 3.8 4.3 7.6

14 0.4 0.7 0.8 1.1 1.5 1.8 2.2 2.5 3.0 3.5 4.0 7.1

15 0.4 0.6 0.8 1.1 1.4 1.7 2.0 2.4 2.8 3.3 3.7 6.7

5x5x8 6x6x8 7x7x8 8x8x8 9x9x8 10x10x8 11x11x8 12x12x8 13x13x8 14x14x8 15x15x8 20x20x8

Room Dimensions (ft)

* This chart provides the time and flow rate needed to raise the ambient level of CO2 in the given area by 1,100 ppm. CO2 supplementation is only beneficial during photosynthesis (when the lights are ON). The frequency of cycles required depends on the size and number of plants in the growing environment. Following these usage rates will result in an average ambient CO2 level between 1,400 and 1,500 ppm.

Common CO2 Regulator UsageM

inut

es O

nM

inut

es O

n

31

Blueprint Controllers Product Profiles

Documents

Transcript of Blueprint Controllers Product Profiles