Publication no. T336a GB / 1000/11/02 Printed in Great Britian.Ren and RenShape are registered trademarks of Vantico AG, Basel, Switzerland. Vantico Ltd, 2002.

www.renshape.com

Product Applications Colour Density Heat Coefficient of Flexural Compressive Compressive Shore-D-(g/cm3) distortion thermal expansion strength strength modulus Hardness

ISO 75 ISO 11359 (10-6 K-1) ISO 178 (MPa) ISO 604 (MPa) ISO 604 (MPa) ISO 868

Resin Hardener Filler Mix Ratio Colour Density Pot Life Castable layer ApplicationsDT 082 (pbw) (g/cm3) (min) thickness (mm)

6414 A 6414 B - 100 : 64 Caramel 1.1 15 - 20 20

6414 A 5117 B - 100 : 35 Light beige 1.1 15 - 20 10

5075 A 6414 B - 100 : 32 Cognac 1.1 15 - 20 75

5073 A 6414 B - 100 : 18 Cognac 1.1 30 - 40 100

FC 50 FC 50 - 20 : 100 Off white 1.6 4 - 5Isocyanate Polyol

FC 51 FC 51 - 100 : 100 Grey 1.6 4 - 5Isocyanate Polyol

FC 52 FC 52 300 100 : 100 Beige 1.6 - 1.7 6 - 7Isocyanate Polyol

FC 53 FC 53 300 100 : 100 Beige 1.6 - 1.7 4 - 5Isocyanate Polyol

FC 54 FC 54 - 100 : 100 Blue 1.6 5 - 7Isocyanate Polyol

FC 55 FC 55 - 100 : 100 Amber 1.1 2 - 3Isocyanate Polyol

6414 A XB 5153 B 100 : 50 White 1.1 10 D 65 - 70 Pattern plates and core boxes

6414 A 6424 B 100 : 72 Green 1.15 15 - 20 D 50 - 55 Core Boxes and abrasion protection

5075 A 6424 B 100 : 36 Green 1.1 10 A 70 - 75

5073 A 6424 B 100 : 20 Green 1.1 15 A 35 - 40

Resin Hardener Mix Ratio Colour Density Pot Life Shore Hardness Applications(pbw) (g/cm3) (min) (ISO 868)

Master andData Control

Models

BM 5055 Green 0.72 - 0.75 135 - 140 35 - 40 30 - 40 50 - 55 2300 - 2400 75

BM 5172 Green 1.2 80 - 90 80 - 85 70 - 80 60 - 70 1900 - 2000 80

BM 5272 Foundry Olive 1.4 80 - 90 65 - 70 80 - 90 70 - 80 3300 - 3500 80 - 85

BM 5273 Red 1.5 85 - 90 80 - 90 70 - 80 50 - 60 2400 - 2800 80 - 85

BM 5112 Hammer forming Grey 1.5 85 - 90 80 - 90 70 - 80 50 - 60 2400 - 2800 80 - 85

BM 5166 Ivory 1.7 75 - 80 45 - 50 55 - 65 90 - 100 7000 - 7500 85 - 90

RS 470 Grey/brown 1.6 - 1.7 85 - 90 40 - 45 55 - 65 95 - 100 7000 - 7500 85 - 90

BM 5266 Dark grey 1.7 120 - 125 45 - 50 80 - 85 125 - 130 7000 - 7500 85 - 90

For lay-up-tools at elevated temperatures

(LT - prepreg)

Jigs andmetalforming

Metalforming andthermoforming

Foundry patterns, core boxes, assembly jigs, abrasion andimpact-resistant parts, flexible moulds

Moulds, foundry patterns, replicas, prototypes,holding fixtures

Rubberlike parts, abrasion protection, sealing strips/parts

RenShape Board Materials

Styling and Modelling Boards

Tooling Boards

5146 A 5146 B with a variety of fillers used for large scale casting applications; please refer to technical datasheet for detailed information

Resin Hardener Filler Mix Ratio Colour Density Pot Life ApplicationsDT 082 (pbw) (g/cm3) (min)

Resin Hardener Applications

RenCast Resilient Polyurethanes (polyurea)

RenGel Polyurethane Gelcoats*

RenGel & RenCast Polyurethane Systems

RenCast Fastcast Polyurethanes

RenCast Masscasting Polyurethane System

* The RenCast A components (Resilient Polyurethanes - see below) can be used with the listed B components to produce gelcoats

Vantico LtdDuxfordCambridge CB2 4QAUKTel: +44 1223 493 000Fax: +44 1223 493 002

BM 5108 White 0.08 - - - - - -

BM 5025 Apricot 0.24 60 60 - 70 5.5 3.7 140 -

BM 5030 Sienna 0.3 60 - 70 60 - 65 6 - 8 6 - 8 250 - 300 -

BM 5185 Modelling Apricot 0.47 60 - 70 60 - 65 10 - 15 10 - 15 500 - 600 -

BM 5440 Brown 0.5 75 - 80 50 - 55 15 - 20 15 - 20 600 - 700 55 - 60

BM 5460 Brown 0.7 75 - 80 50 - 55 25 - 30 20 - 25 910 - 960 60 - 65

BM 5470 Brown 0.75 80 60 35 - 40 33 - 38 600 - 700 60 - 65

Styling