BIOMET 3i Product catalog for surgical technologies

Product Catalog For Surgical Technologies

D I G I T A L L Y - D R I V E N

P A T I E N T A N D

P R A C T I C E M A N A G E M E N T

S O L U T I O N S

C O M P R E H E N S I V E

T I S S U E

M A N A G E M E N T

S O L U T I O N S

S U S T A I N A B L E

A E S T H E T I C

T R E A T M E N T

S O L U T I O N S

A C C E L E R A T E D

T H E R A P Y

S O L U T I O N S

Table Of Contents

IntroductionCompany Overview iProduct Innovations Timeline iiSurface Technologies

The NanoTite™ Implant Family iiiThe OSSEOTITE® Implant Family iv

System DistinctionsCertain® Internal Connection vExternal Hex Connection vi

Implant ConfigurationsNanoTite Implants ixOSSEOTITE 2 Implants xFull OSSEOTITE Implants xiOSSEOTITE Implants xii

Top-Down Treatment Planning xiii

ImplantsCertain Internal Connection:

NanoTite Tapered Certain PREVAIL® 1

OSSEOTITE Tapered Certain PREVAIL 1

NanoTite Certain PREVAIL 2

OSSEOTITE 2 Certain PREVAIL 2

OSSEOTITE Certain PREVAIL 2

NanoTite Tapered Certain 3

Full OSSEOTITE Tapered Certain 3

OSSEOTITE Tapered Certain 4

NanoTite Parallel Walled Certain 5

OSSEOTITE 2 Parallel Walled Certain 5

Full OSSEOTITE Parallel Walled Certain 6

OSSEOTITE Parallel Walled Certain 6

External Hex Connection:

NanoTite Tapered 7

Full OSSEOTITE Tapered 7

OSSEOTITE Tapered 8

NanoTite Parallel Walled 8

OSSEOTITE 2 Parallel Walled 9

Full OSSEOTITE Parallel Walled 9

OSSEOTITE Parallel Walled 10

Healing AbutmentsCertain Internal Connection:

Encode® Two-Piece 11EP® One-Piece 13

External Hex Connection:

BellaTek® Encode Two-Piece 15EP One-Piece 17

Site Preparation TechnologiesProduct Overview 19DU1000 Surgical Drilling Unit 21OSSEOCISION® Surgical Drilling Unit 22Disposable Single-Patient-Use Drill Kits 23Tapered Navigator® System For Guided Surgery 25Parallel Walled Navigator System For Guided Surgery 29Tapered Implant Surgical Kits 32Parallel Walled Surgical Kits 35Reusable Twist Drills, Disposable Twist Drills 39Surgical Drills 40Surgical Components 41Straight, Angled And Summer Osteotomes 49Sinus Elevation, Trephine Burs 50

Regenerative TechnologiesProduct Overview 51Allografts

RegenerOss® Allograft 53RegenerOss Allograft Putty 54

XenograftsEndobon® Xenograft Granules 55

GBR BarriersOsseoGuard® & OsseoGuard Flex® Membranes 55

AlloplastsBiogran®, Calcigen™ Oral Bone Graft System 55

AutogenousSafescraper® TWIST, R. Quétin Bone-Mill 55

Patient Education Products 56

Additional InformationIndex 57

Ordering Form

Ordering Information

i

Introduction

BIOMET 3i offers one of implant dentistry’s most

comprehensive lines of implants and abutments,

augmented by a growing line of site preparation

and regenerative products. BIOMET 3i pioneered

the development of biologically driven implants,

winning worldwide acclaim for the microtextured

surface and superior clinical success rates of the

OSSEOTITE® Implant.

Headquartered in Palm Beach Gardens, Florida,

with operations throughout the world, BIOMET 3i

is one of the leading companies in the oral

reconstruction market. Of equal importance,

BIOMET 3i brings the same innovation, high

standards and comprehensive approach to

customer service, dental practice and laboratory

support and education.

Company Overview

Providing Solutions – One Patient At A Time™

Mission Statement:

BIOMET 3i will be recognized as a global leader in the oral reconstructionmarketplace. We will achieve this through superior customer support andcontinuous product innovation.

ii

Introduction

Product Innovations Timeline - 1987 To Present

1987

• 2mm Standard Abutments• One-Piece Abutment Posts

1988

• Machined Gold UCLA Abutments

• Modification Abutments• 2.9mm Miniplants®

• Pre-Angled Abutments

1989

• Tapered Abutments• 3.75mm Threaded Implants

1990

• EP® Healing Abutments

1991

• Wide Diameter Implants

1992

• Conical Abutments ForSingle-Unit Applications

1993 1994

• Emergence Profile System• EP Abutment Posts• STA Abutments

1995

• ASYST Abutment Delivery System

• Twist Lock™ Impression Copings

• ICE™ Implants

1996

• OSSEOTITE® Implants• Gold Standard ZR™ Hex Machining

1997

• TG OSSEOTITE Single-Stage Implants

• Prep-Tite Posts• Gold-Tite® Screws• Biogran® Bone Graft Material

1999

• GingiHue® Posts• 15° Pre-Angled GingiHue Posts

• Prep-Tite Caps• Try-In Screw With One Turn• OSSEOTITE XP® Implants• Restorative Torque Indicator

2000

• ZiReal® Posts• Simple Logic• PCCS Platelet ConcentrateCollection System

2002

• LOCATOR® Abutments• Safescraper® Bone Collector• Tapered Implant System• Calcigen™ Oral Bone Graft Stabilizer

2003

2004

• DIEM® Immediate OcclusalLoading Guidelines & IOL® Components

• ARCHITECH PSR®: CAM StructSURE® PrecisionMilled Bars, Encode®

Restorative System

• 3i IDS Learning Library®

• PREVAIL® Implants• Provide® Abutments

2006

• Advanced Cutting Technology®

(ACT®) Twist Drills• OSSEOCISION® Drilling Unit• PreFormance®

Provisional Components

➤ ➤ ➤ ➤

➤ ➤ ➤ ➤

➤ ➤ ➤ ➤

➤ ➤ ➤ ➤

➤ ➤ ➤ ➤

1998

2005 2007

➤2008 ➤

• NanoTite™ Implants• Conical Angled Abutments• QuickBridge®

Provisional Components• OsseoGuard® Membrane

➤2011

• OSSEOTITE 2 Implants• CP4 Tapered Implants

• Navigator® InstrumentationFor CT Guided Surgery

• NanoTite TaperedPREVAIL® Implants

• RegenerOss® FamilyOf Products

2009 ➤

• Low & High TorqueIndicating Ratchet Wrenches

2010

• Larger Particle Size Endobon® Xenograft Granules

• Low Profile Abutments

• Protocol For Single-Stage Surgery With Hex Top Implants

• Two-Piece EP® Healing Abutments• Two-Piece Abutment Posts

• OSSEOTITE Certain® InternalConnection Implant SystemWith The QuickSeat® Connection

• OverdentSURE Approach

iii

Introduction

The NanoTite™ Implant FamilyThe NanoTite Implant represents the most recentadvanced dental implant surface technology since theintroduction of the OSSEOTITE® Implant in 1996. The NanoTiteImplant is the patented OSSEOTITE dual-acid-etched surface,which is then further treated with a deposition of nanometerscale crystals of calcium phosphate. This is known as theDiscrete Crystalline Deposition or DCD Process. The surfacetreatment is a discrete crystalline deposition on theOSSEOTITE Surface, not a plasma sprayed coating.

The synergistic effect of these two technologies, theOSSEOTITE Surface and DCD Process, has demonstratedpromising results in animal studies. Because of this synergisticeffect, a more complex micro-surface is created. Preclinicalstudies demonstrated that the NanoTite Surface treatment,when compared to OSSEOTITE Control Implants, significantlyimproved the rate and extent of bone-to-implant contact,resulting in statistically significant enhanced integration.

For all NanoTite Configurations, wherever there is the dual-acid-etched OSSEOTITE Surface, the DCD Nano-scaleCalcium Phosphate has been applied to all NanoTite Configurations.

NanoTite Surface at 20,000x magnification

Surface Technologies

External Connection

NanoTite Tapered Certain®

NanoTite Tapered

Internal Connection

NanoTite Certain PREVAIL®

NanoTite Tapered Certain PREVAIL

NanoTite Parallel Walled Certain

NanoTite Parallel Walled

iv

Introduction

OSSEOTITE Surface at 20,000x magnification

OSSEOTITE Tapered CertainPREVAIL®

The OSSEOTITE® Implant FamilyThe OSSEOTITE Implant features the patenteddual-acid-etched surface that is optimal for improving theclot/implant attachment, which may increase plateletactivation and red blood cell (rbc) agglomeration.

For more than 10 years, with documentation from numerousglobal multicenter clinical evaluations, the OSSEOTITESurface has proven to be one of the most predictable andwell-researched surfaces ever. Clinical studies on theOSSEOTITE Surface continue to document the benefits ofincreased Contact Osteogenesis, especially in poor quality bone.

Surface Technologies

OSSEOTITE Tapered

Full OSSEOTITE Tapered

OSSEOTITE Parallel Walled

Full OSSEOTITE Parallel Walled

Internal Connection

OSSEOTITE 2 Parallel Walled

External Connection

OSSEOTITE 2 Certain PREVAIL

OSSEOTITE Certain PREVAIL

Full OSSEOTITE Tapered Certain®

OSSEOTITE Tapered Certain

OSSEOTITE 2 Parallel Walled Certain

Full OSSEOTITE Parallel Walled Certain

OSSEOTITE Parallel Walled Certain

v

Introduction

System Distinctions

Certain® Internal ConnectionThe internal connection aspect of the implant and abutment are designedfor ease of use and simplicity.Material: Titanium Alloy

• QuickSeat® Connection: It Clicks! The Certain Implant andAbutment Systems feature the QuickSeat Connection. This uniqueconnection produces an audible and tactile “click” that confirmsplacement of Impression Copings and Abutments.

• Abutment Fingers cause the “click” and also provide retention for theprosthetic components in the implant before the screw is placed. A screw is needed to fully seat the components when the restorationis being tried in or definitively placed.

• The 6/12 hex inside the internal connection incorporates both a 6-point single and a 12-point double hex. The 6-point single hex hastwo functions: engaging the driver tip for mountless delivery duringimplant placement and providing anti-rotation for all straightabutments. The 12-point double hex provides 30º rotationalpositioning for pre-angled abutments.

• Impression Copings: Pick-Up and Twist Lock™ Transfer Copings areavailable in the Certain Internal Connection design, in three EP®

(Emergence Profile) diameters and a straight diameter to matchHealing Abutments. The impression copings also

“click” when properly seated. The copings have a different fingerdesign that engages 2mm internally in the implant, as compared tothe abutment’s design that engages 4mm deep into the implant. Thisshorter engagement into the implant is important because it allowsoff-axis draw for implant impressions that are divergent.

• Color-Coding: Certain Implants and all interfacing components arecolor-coded by restorative platform diameter for easy identificationand selection.

vi

Introduction

System Distinctions

External Hex ConnectionThe external hex connection implant and abutment designs have beenwidely used in the implant dentistry. Material: Commercially Pure Titanium (OSSEOTITE® Implants)

Titanium Alloy (NanoTite™ Implants)

• Gold Standard ZR (Zero Rotation) is a patented design incorporatingmachined microstops within the corners of the hex in the abutment.The design reduces horizontal rotation between the implant andabutment. Gold Standard ZR is available on UCLA, GingiHue® andConical Abutments.

• The 12-point double hex, which is machined in the 15º Pre-AngledGingiHue Abutment, provides rotational positioning in 30ºincrements on the implant hex.

• Impression Copings: Pick-Up and Twist Lock™ Transfer Copingsare both available in the external connection design, in three EP®

(Emergence Profile) diameters and a straight diameter to match thecorresponding healing abutment. The patented Twist Lock designprovides a more accurate transfer of the implant connection ascompared to other transfer (closed tray) techniques. This uniqueTwist Lock feature provides a series of undercuts to guide thecoping into the impression, giving stability to the impressioncoping/analog prior to pouring the impression. As a result, thecopings lock into orientation grooves upon clockwise rotation,thereby allowing for a tactile sensation of resistance that ensures anaccurate hex transfer.

• Precise Abutment Placement: The ASYST Abutment PlacementTool provides fingertip control for fast and easy abutment delivery.The patented packaging design makes abutment placement easierbecause the abutment is delivered sterile from the package directlyto the implant site. The abutment and abutment screw are packagedinside the plastic ASYST seating device. The plastic seating devicefacilitates precise placement of the abutment on the implant, thusreducing chair time. The ASYST Tool is packaged with Low Profile,Standard and Conical Abutments.

vii

Introduction

Certain® PREVAIL® Platform Switching Implantscreated an implant system that is designed to

help clinicians in the pursuit of crestal bone preservation. The Certain PREVAIL Implant features Integrated PlatformSwitching, which incorporates a coronal bevel design thatmedializes the Implant Abutment Junction (IAJ). This feature isavailable with both OSSEOTITE® and NanoTite™ Implantsunless otherwise noted.

The Certain PREVAIL Implant’s prosthetic table is appropriatelycolor-coded to ensure proper matching of the correspondingBIOMET 3i Abutments.

The Certain PREVAIL Implant offers the Certain QuickSeat®

Connection. This provides the clinician with an audible andtactile click that confirms the abutment is properly seated. The double hex allows for as many as 12 rotational positions,which is ideal for angled abutments.

The Certain PREVAIL Implant includes several significant features.The surface on both the OSSEOTITE and NanoTite Implantextends to the top of the collar where the medialization of theimplant begins, creating a continuous bone loading surface.

The Certain PREVAIL Platform Switching Implant is offered intwo different implant configurations:

Tapered Certain PREVAIL Implant Incorporates all of the design features of a platform switchingimplant with a tapered design, which approximates the shapeof a natural tooth root. The innovative thread angle, depth andpitch produce an anchoring “bite in bone” response forestablishing primary stability.

Certain PREVAIL Parallel Walled Implant The straight collar design provides the option to use thePREVAIL Implant when platform switching is desired with aparallel walled implant.

Centralized IAJ:Moves microgap in from shoulder

and centralizes occlusal forces.

Full Surface Treatment:Elevates the bone loading surface

for maximum BIC.

4.1mm5mm ˜15°Angle

➤ ➤

➤

➤

➤

➤

.45mm

Tapered

Parallel Walled

Implant Configurations

viii

Introduction

Icon Descriptions:The following icons are used to representthe connection type of the implant system:

Internal External

Certain® Internal Connection Implants & ExternalHex Connection Parallel Walled ImplantsThese implants feature the unique ICE™ Self-Tapping Design and are available in both NanoTite™ and OSSEOTITE®

Surface configurations.

Certain Internal Connection Tapered ImplantsAnd External Hex Connection Tapered ImplantsThese implants closely approximate the shape of a natural toothroot with a thread design that produces an anchoring “bite inbone” response. These are available in both NanoTite andOSSEOTITE Surface configurations.

External ConnectionInternal Connection

External ConnectionInternal Connection

Implant Configurations

ix

Introduction

Implant Configurations - NanoTite™ Implants

ProductCode

Length(mm)

Diameter/Max. Diam

(mm)

SeatingPlatform(mm)

Apical Diameter (mm)

Surface Height (mm)

Surface Height

Thread Pitch(mm)

MaterialComposition

NanoTite Tapered PREVAIL NIITPxxxx 8.5, 10, 11.5, 13, 15

456

3.44.15

2.4 3.23.9

8.00, 9.50,11.00, 12.50, 14.50

Top OfImplant Collar

0.8 TitaniumAlloy

NanoTite Certain PREVAIL(straight collar) NIIOSxxxx 8.5, 10,

11.5, 13, 154/4.15/5

3.44.1

2.63.1

8.03, 9.53, 11.02, 12.52, 14.53


NIIOS43xx = 0.6NIIOS54xx = 0.9

TitaniumAlloy

NanoTite Tapered Certain NINTx(x)xx8.5, 10,11.5,13, 15

3.25456

3.44.156

1.92.43.23.9

6.86, 8.36, 9.86,11.35, 13.36

Base OfCollar 0.8 Titanium

Alloy

NanoTite Certain3.25mm NIOSMxxx

8.5, 10,11.5, 13,15, 18

3.25 3.4 2.4 6.99, 8.48, 9.98,11.48, 13.49, 16.51


Alloy

NanoTite Certain NIOSSxxx8.5, 10,11.5,

13, 15, 181

456

4.156

2.63.14.1

NIOSS4xx = 6.99, 8.48, 9.98,

11.48, 13.49, 16.51

NIOSS5xx/6xx =6.86, 8.36, 9.86,11.35, 13.36

Base OfCollar

NIOSS4xx = 0.6

NIOSS5xx andNIOSS6xx = 0.9

TitaniumAlloy

NanoTite Tapered NNTx(x)xx 8.5, 10,11.5, 13, 15

3.25456

3.44.156

1.92.43.23.9

6.86, 8.36, 9.86,11.35, 13.36


Alloy

NanoTite3.25mm NOSMxxx

8.5, 10,11.5,

13, 15, 183.25 3.4 2.4 6.99, 8.48, 9.98,

11.48, 13.49, 16.48Base OfCollar 0.6 Titanium

Alloy

NanoTite NOSSxxx7, 8.5, 10,11.5, 13,15, 18

456

4.156

2.63.14.1

NOSS4xx = 5.84, 7.37, 8.86,

10.36, 11.86,13.87,16.87

NOSS5xx/6xx =6.15, 7.67, 9.17,

10.67, 12.17, 14.17, 17.17

Base OfCollar

NOSS4xx = 0.6

NOSS5xx andNOSS6xx = 0.9

TitaniumAlloy

1 18mm length only available in 4xx

Certa

in In

ternal Connection

External Hex Connection

Certa

in®PR

EVAIL®

x

Introduction

Implant Configurations - Implants

ProductCode

Length(mm)

Diameter/Max. Diam

(mm)

SeatingPlatform(mm)

ApicalDiameter(mm)

Surface Height (mm)

Surface Height

Thread Pitch(mm)

MaterialComposition

OSSEOTITE 2 Certain® PREVAIL®

(straight collar) XIIOSxxxx 8.5, 10,11.5, 13, 15

4/4.15/56/6

3.44.15

2.83.14.1

8.03, 9.53, 11.02, 12.52, 14.53


XIIOS43xx = 0.6

XIIOS54xx andXIIOS65xx = 0.8

CommerciallyPure Titanium

OSSEOTITE 2 Certain3.25mm XIFOSMxxx 8.5, 10, 11.5,

13, 15 3.25 3.4 2.5 8.13, 9.63, 11.13,12.62, 14.63

Top OfImplantCollar

0.6 CommerciallyPure Titanium

OSSEOTITE 2 Certain XIFOSSxxx 8.5, 10, 11.5,13, 15

456

4.156

2.83.14.1

8.13, 9.63, 11.13,12.62, 14.63

Top OfImplantCollar

XIFOS4xx = 0.6

XIFOSS5xx andXIFOSS6xx = 0.8


OSSEOTITE 23.25mm XFOSMxxx 6.5, 8.5, 10,

11.5, 13, 15 3.25 3.4 2.5 6.10, 8.13, 9.63,11.13, 12.62, 14.63

Top Of ImplantCollar


OSSEOTITE 2 XFOSxxx 6.5, 8.5, 10,11.5, 13, 15

3.75456

4.14.156

2.82.83.14.1

6.10, 8.13, 9.63,11.13, 12.62, 14.63

Top OfImplantCollar

XFOSS3xx and XFOSS4xx = 0.6

XFOSS5xx andXFOSS6xx = 0.8


Certa

in In

ternal Connection


xi

Introduction

Implant Configurations - Full OSSEOTITE® Implants

ProductCode

Length(mm)

Diameter/Max. Diam

(mm)

SeatingPlatform(mm)

ApicalDiameter(mm)

Surface Height(mm)

SurfaceHeight

Thread Pitch (mm)

MaterialComposition

OSSEOTITE Tapered PREVAIL® XIITPxxxx 8.5, 10, 11.5, 13, 15

456

3.44.15

2.4 3.23.9

8.00, 9.50,11.00, 12.50, 14.50



OSSEOTITE Certain® PREVAIL(straight collar) IIOSxxxx 8.5, 10, 11.5,

13, 154/4.15/5

3.44.1

2.63.1

8.03, 9.53, 11.02,12.52, 14.53

Top OfImplantCollar

IIOS43xx = 0.6

IIOS54xx = 0.9TitaniumAlloy

OSSEOTITE Tapered Certain XIFNTx(x)xx 8.5, 10, 11.5,13, 15

3.25456

3.44.156

1.92.43.23.9

8.13, 9.63, 11.13,12.62, 14.63

Top OfImplantCollar


Full OSSEOTITE Tapered Certain IFNTx(x)xx 8.5, 10, 11.5,13, 15

3.25456

3.44.156

1.92.43.23.9

8.13, 9.63, 11.13,12.62, 14.63

Top OfImplantCollar

0.8 TitaniumAlloy

Full OSSEOTITE Certain3.25mm IFOSMxxx 8.5, 10, 11.5,

13, 15 3.25 3.4 2.4 8.13, 9.63, 11.13,12.62, 14.63

Top OfImplantCollar

0.6 TitaniumAlloy

Full OSSEOTITE Certain IFOSxxx 8.5, 10, 11.5,13, 15

456

4.156

2.63.14.1

8.13, 9.63, 11.13,12.62, 14.63

Top OfImplantCollar

IFOS4xx = 0.6

IFOS5xx andIFOS6xx = 0.9

TitaniumAlloy

Full OSSEOTITE Tapered FNTx(x)xx 8.5, 10, 11.5, 13, 15

3.25456

3.44.156

1.92.43.23.9

8.13, 9.63, 11.13,12.62, 14.63

Top OfImplantCollar


Full OSSEOTITE3.25mm FOSMxxx 7, 8.5, 10,

11.5, 13, 15 3.25 3.4 2.4 6.38, 8.13, 9.63,11.13, 12.62, 14.63

Top Of ImplantCollar


Full OSSEOTITE FOSxxx 7, 8.5, 10,11.5, 13, 15

3.75456

4.14.156

2.32.63.14.1

6.38, 8.13, 9.63,11.13, 12.62, 14.63

Top OfImplantCollar

FOSS3xx and FOSS4xx = 0.6

FOSS5xx andFOSS6xx = 0.9


Certa

in In

ternal Connection


Certa

in PRE

VAIL

xii

Introduction

Implant Configurations - OSSEOTITE® Implants

ProductCode

Length(mm)

Diameter/Max. Diam

(mm)

SeatingPlatform(mm)

ApicalDiameter(mm)

Surface Height (mm)

Surface Height

Thread Pitch(mm)

MaterialComposition

OSSEOTITE Tapered Certain® INTx(x)xx 8.5, 10, 11.5,13, 15

3.25456

3.44.1 56

1.92.43.23.9

6.86, 8.36,9.86,11.35, 13.36


Alloy

OSSEOTITE Certain3.25mm IOSMxxx 8.5, 10, 11.5,

13, 15, 18 3.25 3.4 2.4 6.35, 6.32, 7.82,9.32, 11.33, 14.35

Third (3rd)Thread FromCollar Base

0.6 TitaniumAlloy

OSSEOTITE Certain IOSSxxx8.5, 10, 11.5,13, 15, 182,

202

456

4.156

2.63.14.1

IOSS4xx/6xx = 6.35, 6.32, 7.82,

9.32, 11.33,14.35, 16.36

IOSS5xx = 6.35, 6.20, 7.70,

9.19, 11.20

Third (3rd)Thread FromCollar Base

IOSS4xx = 0.6

IOSS5xx andIOSS6xx = 0.9

TitaniumAlloy

OSSEOTITE Tapered NT(x)xx 8.5, 10, 11.5,13, 15

3.254 56

3.44.156

1.92.43.23.9

6.86, 8.36, 9.86,11.35, 13.36

Base OfCollar 0.8 Commercially

Pure Titanium

OSSEOTITE 3.25mm OSMxxx 8.5, 10, 11.5,13, 15, 18 3.25 3.4 2.4

6.35, 5.69,7.19, 8.69,10.69, 13.69

Third (3rd)Thread From Collar Base


OSSEOTITE OSSxxx73, 8.5, 10,11.5, 13, 15,

18, 204

3.75456

4.14.156

2.3 2.63.14.1

4.83, 6.35, 5.69,7.19, 8.69, 10.69,

13.69, 15.70

Third (3rd)Thread From Collar Base

OSS3xx andOSS4xx = 0.6

OSS5xx andOSS6xx = 0.9


2 18mm & 20mm lengths only available in 4xx3 7mm length only available in 5xx & 6xx 4 20mm length only available in 3xx & 4xx5 18mm length only available in 3/4 only

Certa

in In

ternal Connection


xiii

Top-Down Treatment Planning

In its simplest form, top-down treatment planningrefers to a guideline whereby the desired restorativeresult is considered first, leading to consideration ofthe appropriate prosthetic platform and subsequentimplant selection based on bony anatomy and thesize of the missing tooth.

A top-down treatment planning methodology willprovide maximum biomechanical stability and allow forsoft-tissue flaring by utilizing an implant with aprosthetic platform slightly smaller in diameter than theemergence diameter of the tooth being replaced. A wideselection of Implants allows clinicians to match the sizeof the prosthetic platform to the restoration it willeventually support, while allowing for different bonevolumes and anatomical features at the implant site.

Implant and healing abutment selections are basedupon the relationship of several key measurements:

• The emerging dimension of the crown in relation tothe diameter of the prosthetic platform of the implant

• The height and diameter of the intended restorationat the tissue exit point

• The bone volume at the implant site in relation to the diameter of the implant body

The Emergence Profile (EP®) Healing Abutment System consists of healing abutments of various diameters andheights for shaping the soft tissue to replicate thegeometry and gingival contours of natural dentition.

4mm(D)/3mm(P) 5mm(D)/4mm(P) 6mm(D)/5mm(P)3.25mm(D) 3.75mm(D) 4mm(D) 5mm(D) 6mm(D) PREVAIL® PREVAIL PREVAIL

Anterior (incisor/canine) ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔Pre-molar ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔Molar ✔ ✔ ✔ ✔ ✔ ✔

Implant Indications: Include both straight and pre-angled restorative components.

NOTE: It is recommended that implants less than 4mm diameter not be placed in the molar regions.

xiv

Top-Down Treatment Planning

7.5

3.54

5.5 5

8 9 5 5.55

8 58 5

6mm 6mm 4mm 5mm

6mm 3.25mm4mm 5mm6mm

3.25mm 5mm4mm

3.25mm4mm

7.5

3.54

5.5 5

8 9 5 5.55

8 58 5

6mm 6mm 4mm 5mm

6mm 3.25mm4mm 5mm6mm

3.25mm 5mm3.75mm

3.25mm4mm

Parallel WalledImplants

TaperedImplants

CrownDiameter

CrownDiameter

ImplantDiameter

ImplantDiameter

1

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.Algunos productos no se comercializan fuera de EE.UU.Certains produits ne sont pas disponibles en dehors des États-Unis.Einige Produkte sind außerhalb der USA nicht erhältlich.

ImplantsCertain® Internal Connection

FullNanoTiteSurface

Cover Screw Flat(included)

IMCSF34 ICSF41 ICSF50Cover Screw Headless N/A ICS275 ICS275

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500

NanoTite™ Tapered Certain PREVAIL®

Length 4/3mm (P) 5/4mm (P) 6/5mm (P)

8.5mm NIITP4385 NIITP5485 NIITP6585

10mm NIITP4310 NIITP5410 NIITP6510

11.5mm NIITP4311 NIITP5411 NIITP6511



Titanium Alloy

FullOSSEOTITESurface


IMCSF34 ICSF41 ICSF50Cover Screw Headless N/A ICS275 ICS275

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500

OSSEOTITE® Tapered Certain PREVAIL

Length 4/3mm (P) 5/4mm (P) 6/5mm (P)

8.5mm XIITP4385 XIITP5485 XIITP6585

10mm XIITP4310 XIITP5410 XIITP6510

11.5mm XIITP4311 XIITP5411 XIITP6511



2.4

1.25 1.25 1.25

3.9

Commercially Pure Titanium

4.1 5 6

4.1 5

2.4 3.2

1.25 1.25 1.25

3.9

3.4

4.1 5 6

4.1 5

3.4

3.2

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.


2




FullNanoTiteSurface

Length 4/3mm (P) 5/4mm (P)

8.5mm NIIOS4385 NIIOS5485

10mm NIIOS4310 NIIOS5410

11.5mm NIIOS4311 NIIOS5411




IMCSF34 ICSF41Cover Screw Headless N/A ICS275

Cover Screw 1mm(H) IMMCS1 ICS375*

NanoTite™Certain PREVAIL®Titanium Alloy

Certain

Internal Connection



IMCSF34 ICSF41 ICSF50 IMCSF34 ICSF41Cover Screw Headless N/A ICS275 ICS275 N/A ICS275

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 IMMCS1 ICS375*

4.1 5 6

Certain PREVAIL

Length 4/3mm (P) 5/4mm (P) 6/5mm (P) 4/3mm (P) 5/4mm (P)

8.5mm XIIOS4385 XIIOS5485 XIIOS6585 IIOS4385 IIOS5485

10mm XIIOS4310 XIIOS5410 XIIOS6510 IIOS4310 IIOS5410

11.5mm XIIOS4311 XIIOS5411 XIIOS6511 IIOS4311 IIOS5411



2.8



.5.5 .5 .5 .5

OSSEOTITE Certain PREVAIL

2.6

Titanium Alloy4.1 3.4 4.15

4.1 5

4.1

.5 .5

2.6

4.1

4.1 5

3.4

3.4

3.1 3.1

3.1



3




Length 3.25mm (D) 4mm (D) 5mm (D) 6mm (D)

8.5mm NINT3285 NINT485 NINT585 NINT685

10mm NINT3210 NINT410 NINT510 NINT610

11.5mm NINT3211 NINT411 NINT511 NINT611



NanoTite™ Tapered Certain

ModifiedHybrid

NanoTiteSurface

1.25 1.25 1.25 1.25

2.41.9


8.5mm XIFNT3285 XIFNT485 XIFNT585 XIFNT685

10mm XIFNT3210 XIFNT410 XIFNT510 XIFNT610

11.5mm XIFNT3211 XIFNT411 XIFNT511 XIFNT611




Full OSSEOTITE® Tapered Certain

Titanium Alloy



IMCSF34 ICSF41 ICSF50 ICSF60Cover Screw Headless N/A ICS275 ICS275 ICS275

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 ICS600*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.



IMCSF34 ICSF41 ICSF50 ICSF60

Cover Screw Headless N/A ICS275 ICS275 ICS275

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 ICS600

3.9

4.1 5 6

1.25 1.25 1.25 1.25

2.41.9

4.1 5 6

3.2

3.93.2

3.4

3.4

4




Certain

Internal Connection


8.5mm IFNT3285 IFNT485 IFNT585 IFNT685

10mm IFNT3210 IFNT410 IFNT510 IFNT610

11.5mm IFNT3211 IFNT411 IFNT511 IFNT611




Full OSSEOTITE® Tapered CertainTitanium Alloy











HybridOSSEOTITESurface

OSSEOTITE Tapered CertainTitanium Alloy


8.5mm INT3285 INT485 INT585 INT685

10mm INT3210 INT410 INT510 INT610

11.5mm INT3211 INT411 INT511 INT611



1.25 1.25 1.25 1.25

2.41.9

4.1 5 6

1.25 1.25 1.25 1.25

2.41.9

4.1 5 6

3.93.2

3.93.2

3.4

3.4

5





8.5mm NIOSM385 NIOSS485 NIOSS585 NIOSS685

10mm NIOSM310 NIOSS410 NIOSS510 NIOSS610

11.5mm NIOSM311 NIOSS411 NIOSS511 NIOSS611



18mm NIOSM318 NIOSS418 N/A N/A

ModifiedHybrid

NanoTiteSurface




NanoTite™ Parallel Walled Certain


Titanium Alloy


8.5mm XIFOSM385 XIFOSS485 XIFOSS585 XIFOSS685

10mm XIFOSM310 XIFOSS410 XIFOSS510 XIFOSS610

11.5mm XIFOSM311 XIFOSS411 XIFOSS511 XIFOSS611



Parallel Walled CertainCommercially Pure Titanium




Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 ICS600*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

1.15 1 1.25 1.25

2.4 2.6

4.1 5 6

4.1

1.15 1 1.25 1.25

2.5 2.8

4.1 5 6

4.1

3.4

3.4

3.1

3.1

6





8.5mm IFOSM385 IFOS485 IFOS585 IFOS685

10mm IFOSM310 IFOS410 IFOS510 IFOS610

11.5mm IFOSM311 IFOS411 IFOS511 IFOS611




Full OSSEOTITE® Parallel Walled CertainTitanium Alloy






Certain

Internal Connection








8.5mm IOSM385 IOSS485 IOSS585 IOSS685

10mm IOSM310 IOSS410 IOSS510 IOSS610

11.5mm IOSM311 IOSS411 IOSS511 IOSS611



18mm IOSM318 IOSS418 N/A N/A

20mm N/A IOSS420 N/A N/A

OSSEOTITE Parallel Walled Certain Titanium Alloy

1.251.251.15 1.25

2.4 2.6

4.1 5 6

4.1

1.15 1 1.25 1.25

2.4 2.6

4.1 5 6

4.1

3.4

3.4

3.1

3.1

3.4

1.25 1.25 1.25

2.5.7

2.4

2.7 2.7 2.7.7

5

.7

4.1

3.2

1.25

6

.7

3.91.9

ModifiedHybrid

NanoTiteSurface

NanoTite™ Tapered


8.5mm NNT3285 NNT485 NNT585 NNT68510mm NNT3210 NNT410 NNT510 NNT610

11.5mm NNT3211 NNT411 NNT511 NNT611

13mm NNT3213 NNT413 NNT513 NNT613

15mm NNT3215 NNT415 NNT515 NNT615

Cover Screw 1mm(H)(included)

MMCS1 CS375 CS500 CS600Cover Screw Headless CS275 CS275 CS275 CS275



Titanium Alloy

Full OSSEOTITE® Tapered


8.5mm FNT3285 FNT485 FNT585 FNT685

10mm FNT3210 FNT410 FNT510 FNT610

11.5mm FNT3211 FNT411 FNT511 FNT611





7

ImplantsExternal Hex Connection



1.25 1.25 1.25.7

2.4

.7 .71.25

.7

1.9

3.42.5 2.7 2.7 2.7

54.1 6

3.2 3.9

8




ModifiedHybrid

OSSEOTITESurface

Length 3.25mm (D) 4mm (D) 5mm (D) 6mm (D) D)

8.5mm NT3285 NT485 NT585 NT68510mm NT3210 NT410 NT510 NT610

11.5mm NT3211 NT411 NT511 NT611

13mm NT3213 NT413 NT513 NT613

15mm NT3215 NT415 NT515 NT615

OSSEOTITE® TaperedCommercially Pure Titanium


MMCS1 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275


2.4

NanoTite™ Parallel Walled

ModifiedHybrid

NanoTiteSurface


7mm N/A NOSS407 NOSS507 NOSS607

8.5mm NOSM385 NOSS485 NOSS585 NOSS685

10mm NOSM310 NOSS410 NOSS510 NOSS610

11.5mm NOSM311 NOSS411 NOSS511 NOSS611




Titanium Alloy

3.4

1.25 1.25 1.25

2.5.7

2.4

2.7 2.7 2.7.7

5

.7

4.1

1.25

6

.7

1.9

3.4

1.15 .75 .5 .5

2.5.7

2.4 2.6

2.7 2.7 2.7.7

5

.7

4.1 6

.7

4.1



3.2 3.9

3.1

9





MMCS1 CS375 CS375 CS500 CS600Cover Screw Headless CS275 CS275 CS275 CS275 CS275



Parallel Walled

Length 3.25mm (D) 3.75mm (D) 4mm (D) 5mm (D) 6mm (D)

6.5mm XFOSM365 XFOS365 XFOS465 XFOS565 XFOS665


10mm XFOSM310 XFOS310 XFOS410 XFOS510 XFOS610






Full OSSEOTITE Parallel Walled


7mm FOSM307 FOS307 FOS407 FOS507 FOS607

8.5mm FOSM385 FOS385 FOS485 FOS585 FOS685


11.5mm FOSM311 FOS311 FOS411 FOS511 FOS611





3.4

1.15 .75 .5 .5

2.5.7

2.5 2.8

2.7 2.7 2.7.7

5

.7

4.1 6

.7.75

2.8

2.7.7

4.1

4.1

3.4

1.15 .75 .5 .5

2.5.7

2.4 2.3 2.6

2.7 2.7 2.7.7

5

.7

4.1 6

.7.75

2.7.7

4.1

4.1

3.1

3.1

10






OSSEOTITE® Parallel Walled


7mm N/A N/A N/A OSS507 OSS607

8.5mm OSM385 OSS385 OSS485 OSS585 OSS685

10mm OSM310 OSS310 OSS410 OSS510 OSS610

11.5mm OSM311 OSS311 OSS411 OSS511 OSS611



18mm OSM318 OSS318 OSS418 OSS518 0SS618

20mm N/A OSS320 OSS420 N/A N/A




3.4

1.15 .75 .5 .5

2.5.7

2.4 2.3 2.6

2.7 2.7 2.7.7

5

.7

4.1 6

.7.75

2.7.7

4.1

4.13.1

11

Healing AbutmentsCertain® Internal Connection



4.1mm Seating Surface

Seating Surface3.4mm

68°

4.1

5

h

5

h

3.4

55°

Encode® Two-Piece

Emergence Profile Collar Height Item Numbers

3.8mm 3mm IEHA343

3.8mm 4mm IEHA344

3.8mm 6mm IEHA346

3.8mm 8mm IEHA348

5mm 3mm IEHA353

5mm 4mm IEHA354

5mm 6mm IEHA356

5mm 8mm IEHA358

4.1mm 3mm IEHA443

4.1mm 4mm IEHA444

4.1mm 6mm IEHA446

4.1mm 8mm IEHA448

5mm 3mm IEHA453

5mm 4mm IEHA454

5mm 6mm IEHA456

5mm 8mm IEHA458

6mm 3mm IEHA463

6mm 4mm IEHA464

6mm 6mm IEHA466

6mm 8mm IEHA468

7.5mm 3mm IEHA473

7.5mm 4mm IEHA474

7.5mm 6mm IEHA476

7.5mm 8mm IEHA478


The BellaTek® EncodeImpression Systemeliminates the need for animplant-level impression whiledelivering a patient specificrestoration with appropriatemargin height and naturalemergence contours for thepatient. This accuracy isachieved from an impression of the BellaTek EncodeHealing Abutment.

Codes embedded on theocclusal surface of theBellaTek Encode HealingAbutment communicate thecollar height, implant hexorientation, platform diameterand interface (the CertainInternal Connection or ExternalHex Connection) of the implant.

Because the tissue is healed atthe time of impression, themargin should have theappropriate placement andcontour. The result is a patientspecific, anatomically designed,final BellaTek Encode Abutment.Available in titanium, titaniumnitride coating or zirconia.

Occlusal markings provide scannerinformation for abutment design.

12




Certain

Internal Connection

6mm Seating Surface

5mm Seating Surface


Encode® Two-Piece


5.6mm 3mm IEHA553

5.6mm 4mm IEHA554

5.6mm 6mm IEHA556

5.6mm 8mm IEHA558

6mm 3mm IEHA563

6mm 4mm IEHA564

6mm 6mm IEHA566

6mm 8mm IEHA568

7.5mm 3mm IEHA573

7.5mm 4mm IEHA574

7.5mm 6mm IEHA576

7.5mm 8mm IEHA578

6.8mm 3mm IEHA663

6.8mm 4mm IEHA664

6.8mm 6mm IEHA666

6.8mm 8mm IEHA668

7.5mm 3mm IEHA673

7.5mm 4mm IEHA674

7.5mm 6mm IEHA676

7.5mm 8mm IEHA678

5.6

h

5

45°

6.8

h

6

35°

EP (Emergence Profile)Height

Restorative Platform

13




3.8

60°

6

4.1

7.5

45°

4.1

65°

5

90°

4.1

4.1

90°

45°

3.4




4.1

h

h

h

h

h

4.1mm 2mm ISHA42

4.1mm 3mm ISHA43

4.1mm 4mm ISHA44

4.1mm 6mm ISHA46

4.1mm 8mm ISHA48

5mm 2mm ITHA52

5mm 3mm ITHA53

5mm 4mm ITHA54

5mm 6mm ITHA56

5mm 8mm ITHA58

6mm 3mm ITHA63

6mm 4mm ITHA64

6mm 6mm ITHA66

6mm 8mm ITHA68

7.5mm 3mm ITHA73

7.5mm 4mm ITHA74

7.5mm 6mm ITHA76

7.5mm 8mm ITHA78

EP® One-Piece


3.4mm 2mm ISMHA32

3.4mm 3mm ISMHA33

3.4mm 4mm ISMHA34

3.4mm 6mm ISMHA36

3.8mm 2mm IMHA32

3.8mm 3mm IMHA33

3.8mm 4mm IMHA34

3.8mm 6mm IMHA36

5mm 2mm IMHA352

5mm 3mm IMHA353

5mm 4mm IMHA354

5mm 6mm IMHA356

3.4

3.4

h

3.4

63°

5

h

14




Certain

Internal Connection

90°

7.5

30°

5.6

45°

6

5

5

35°

Seating Surface5mm

EP® One-Piece


5mm 2mm ISWHA52

5mm 3mm ISWHA53

5mm 4mm ISWHA54

5mm 6mm ISWHA56

5mm 8mm ISWHA58

5.6mm 2mm IWTH52

5.6mm 3mm IWTH53

5.6mm 4mm IWTH54

5.6mm 6mm IWTH56

5.6mm 8mm IWTH58

6mm 2mm IWTH562

6mm 3mm IWTH563

6mm 4mm IWTH564

6mm 6mm IWTH566

6mm 8mm IWTH568

7.5mm 2mm IWTH572

7.5mm 3mm IWTH573

7.5mm 4mm IWTH574

7.5mm 6mm IWTH576

7.5mm 8mm IWTH578

5

h

h

h

5

5

h

6

50°

6

35°

7.5

6.8

Seating Surface6mm


h

h

6mm 2mm ISWHA62

6mm 3mm ISWHA63

6mm 4mm ISWHA64

6mm 6mm ISWHA66

6mm 8mm ISWHA68

6.8mm 2mm IWTH62

6.8mm 3mm IWTH63

6.8mm 4mm IWTH64

6.8mm 6mm IWTH66

6.8mm 8mm IWTH68

7.5mm 2mm IWTH672

7.5mm 3mm IWTH673

7.5mm 4mm IWTH674

7.5mm 6mm IWTH676

7.5mm 8mm IWTH678

90°h

6

6

15

Healing AbutmentsExternal Hex Connection



Occlusal markings provide scannerinformation for abutment design.




4.1

5

h68°

5

h

3.4

55°

Encode® Two-Piece


3.8mm 3mm EHA343

3.8mm 4mm EHA344

3.8mm 6mm EHA346

3.8mm 8mm EHA348

5mm 3mm EHA353

5mm 4mm EHA354

5mm 6mm EHA356

5mm 8mm EHA358

4.1mm 3mm EHA443

4.1mm 4mm EHA444

4.1mm 6mm EHA446

4.1mm 8mm EHA448

5mm 3mm EHA453

5mm 4mm EHA454

5mm 6mm EHA456

5mm 8mm EHA458

6mm 3mm EHA463

6mm 4mm EHA464

6mm 6mm EHA466

6mm 8mm EHA468

7.5mm 3mm EHA473

7.5mm 4mm EHA474

7.5mm 6mm EHA476

7.5mm 8mm EHA478




6mm Seating Surface

5mm Seating Surface


Encode® Two-Piece


5.6mm 3mm EHA553

5.6mm 4mm EHA554

5.6mm 6mm EHA556

5.6mm 8mm EHA558

6mm 3mm EHA563

6mm 4mm EHA564

6mm 6mm EHA566

6mm 8mm EHA568

7.5mm 3mm EHA573

7.5mm 4mm EHA574

7.5mm 6mm EHA576

7.5mm 8mm EHA578

6.8mm 3mm EHA663

6.8mm 4mm EHA664

6.8mm 6mm EHA666

6.8mm 8mm EHA668

7.5mm 3mm EHA673

7.5mm 4mm EHA674

7.5mm 6mm EHA676

7.5mm 8mm EHA678

5.6

h

5

45°

6.8

h

6

35°

16


EP (Emergence Profile)Height

Restorative Platform

17




3.8

4.1

6

7.5

45°

4.1

4.1

4.1

60°

4.1

65°

5

90°

45°

3.44.1mm Seating Surface



h

h

h

h

h

THRC4

Temporary Healing Retention CylinderRetains denture with soft tissue liner.

4.1mm(D) x 4mm(H)THRC6

4.1mm(D) x 6mm(H)

4.1mm 2mm THA42

4.1mm 3mm THA43

4.1mm 4mm THA44

4.1mm 6mm THA46

4.1mm 8mm THA48

5mm 2mm THA52

5mm 3mm THA53

5mm 4mm THA54

5mm 6mm THA56

5mm 8mm THA58

6mm 3mm THA63

6mm 4mm THA64

6mm 6mm THA66

6mm 8mm THA68

7.5mm 3mm THA73

7.5mm 4mm THA74

7.5mm 6mm THA76

7.5mm 8mm THA78

EP® One-Piece


3.8mm 2mm MHA32

3.8mm 3mm MHA33

3.8mm 4mm MHA34

3.8mm 6mm MHA36

18




6

5

7.5

45°

35°

30°

Seating Surface5mm

EP® One-Piece


5.6mm 2mm WTH52

5.6mm 3mm WTH53

5.6mm 4mm WTH54

5.6mm 6mm WTH56

5.6mm 8mm WTH58

6mm 2mm WTH562

6mm 3mm WTH563

6mm 4mm WTH564

6mm 6mm WTH566

6mm 8mm WTH568

7.5mm 2mm WTH572

7.5mm 3mm WTH573

7.5mm 4mm WTH574

7.5mm 6mm WTH576

7.5mm 8mm WTH578

5

5

5.6

h

h

h

6

6

50°

35°

7.5

6.8

Seating Surface6mm


h

h

6.8mm 2mm WTH62

6.8mm 3mm WTH63

6.8mm 4mm WTH64

6.8mm 6mm WTH66

6.8mm 8mm WTH68

7.5mm 2mm WTH672

7.5mm 3mm WTH673

7.5mm 4mm WTH674

7.5mm 6mm WTH676

7.5mm 8mm WTH678


19

Site Preparation Technologies

The Navigator® System For Guided SurgeryThe Navigator System helps clinicians to transform computer-based planning into practical implant placement with anopportunity for immediate provisionalization.

The Navigator System enables placement and restoration of the following Tapered and Parallel Walled Implant Systems:

• Tapered/Parallel Walled Certain® 3.25, 4 and 5mm Implants

• Certain PREVAIL® 3/4/3, 4/3, 4/5/4 and 5/4 Implants

• Certain Tapered PREVAIL 4/3 and 5/4 Implants

• OSSEOTITE XP® 4/5 Implants

Features specific to the Navigator System include:

• Depth-specific instrumentation for preparation andimplant placement

• Control of hex-orientation to fabricate and deliver provisionalrestorations immediately following implant placement

• Open architecture compatibility that provides freedom tochoose among leading planning software solutions

DU1000 & OSSEOCISION® Surgical Drilling UnitsBoth DU1000 and OSSEOCISION Surgical Drilling Units accepttwist drills, shaping drills and implant drivers. The units powerthese instruments in order to create the osteotomy for implant placement.

• Ergonomic handpiece design

• Customized programs for every stage of dental implantsurgical procedures

• Foot control for hands-free program and setting selections

Tapered Navigator Surgical Kit

Tapered Navigator Tap & Laboratory Kit

OSSEOCISION Surgical Drilling Unit

DU1000 Surgical Drilling Unit

Product Overview

20


Advanced Cutting Technology® (ACT®) Drills

• Two-flute design for efficient cutting

• Alternating lines and bands enhance depth mark visibility anddrill orientation in the osteotomy

• Matte finish to reduce glare

Tapered Implant Depth Indicators& Quad Shaping Drills

• Tapered Implant Depth Indicators (NTDIs) verify the position ofthe implant platform prior to placement

• Quad Shaping Drills (QSDs) use stepped depth marks foraccuracy in creating the osteotomy

• QSDs have end cutting ability

• Both QSDs and NTDIs are color-coded for platform recognition

Summers Osteotomes & Tapered Osteotomes

• Summers Osteotomes for use with parallel walled implants

• Tapered Osteotomes available in straight and angled designsfor use with tapered implants

• Matte finished tip surface to reduce glare

• Ball striking end to facilitate use of a mallet

High Torque Indicating Ratchet Wrench (H-TIRW)

• The H-TIRW doubles as a conventional ratchet wrench toplace implants and as a torque indicator to provided a visualassesment of torque.

• Clearly indicates forward and reverse torque of 50-90Ncmwithout the need for additional components.

• Does not require lubrication or periodic re-calibration.Calibration may be checked by verifying that the arrow ispositioned at the first scale mark (0Ncm).

• Consisting of only two parts, the H-TIRW is easy to prepare for sterilization.

Product Overview

21



Description Item Numbers

DU1000 Surgical Drilling Unit115 volt DU1000US230 volt DU1000EU*

Accessories Included With The DU1000:Micromotor With Cable - 1.8m/5.9ft motor cable plugs into console and attaches to handpiece DU1KMC

Motor/Handpiece Support - Drill unit attachment for resting handpiece DU1KHS

Foot Control - Ergonomic design, variable speed and connects to console to provide foot activation DU1KFC

Handle For Foot Control - Foot control attachment allowing for repositioning of foot control DU1KH1

Irrigation Bag Stand - Stand for irrigation solution bag DU9IBS

Circuit Fuse - Fuse for console, T1.25AH (250 volt) DU9F

Motor Protective Cover - Component placed over the end of a DU1KMC before cleaning and disinfection and for sterilization in sterilizers without a drying program DU9SP

Locking Pin - Prevents handpiece on the motor attachment from turning during transmission DU9LP

Disposable Irrigation Tubing Set (6-piece) - For the supply of irrigation fluid DU1KIT

Spray Cap With Nozzle - Spray cap for service oil DU9SC

Bur Testing Gauge - Verifies bur/drill shank diameter DU9BG

Irrigation Tube Clamps (5-pack) - Clamps holding irrigation tubing to motor cable (DU9MC) DU9CL

Electrical Power Cord (United States, Canada, Japan) - Connects to console and appropriate wall outlet DU9PCUS

Electrical Power Cord (European Union) - Connects to console and appropriate wall outlet DU9PCEU*

Electrical Power Cord (Switzerland) - Connects to console and appropriate wall outlet DU1KPCCH*

Electrical Power Cord (Denmark) - Connects to console and appropriate wall outlet DU1KPCDK*

Electrical Power Cord (United Kingdom, Ireland) - Connects to console and appropriate wall outlet DU9PCUK*

Electrical Power Cord (Australia, New Zealand) - Connects to console and appropriate wall outlet DU9PCAU*

The following items are not included with the DU1000 Surgical Drilling Unit, but can be ordered separately through Customer Service.

20:1 Handpiece - WS-75 E/KM Gear reduction handpiece DU9WS75

20:1 Handpiece - WI-75 LED G Gear reduction handpiece with built-in LED light DU9WI75L

Nozzle Cleaner - Cleans coolant outlets of handpieces; included with handpiece DU9NC

Y-Connector (3-pack) - Used to bifurcate irrigant flow from irrigation tube, DU1KIT, to provide bothinternal and external irrigation; included with handpiece DU9YC

DU1000 Surgical Drilling Unit

*Not available in the United States.

All accessories listed are compatible with both the DU900 andDU1000 except for DU1KMC, DU1KHS, DU1KFC and DU1KH1.

22




OSSEOCISION Surgical Drilling Unit120 volt DS100US100 volt DS100J*230 volt DS100RW*

Accessories Included With The OSSEOCISION Surgical Drilling Unit:Tube Clamp - Holds irrigation tubing to motor cord C202-750

Internal Irrigation Tube - “L” shaped tube that fits through the handpiece head and connects theirrigation tubing and an internally irrigated component C293-025

Y-Connector - Used to bifurcate irrigant flow from irrigation tube to provide both internaland external irrigation C823-752

Micromotor With Cord - Plugs into DS100 Console and attaches to handpiece E211-001

Autoclave Plug For Motor - Used to keep moisture from entering micromotor during sterilization E211-701

20:1 Handpiece - 20:1 Gear Reduction Handpiece for the drilling unit SGQ-ER20H

Fuse (100V/120V) - Circuit fuse for DS100 Console (110–130 volt) U195-152

Fuse (230V) - Circuit fuse for DS100 Console (230 volt) U197-152*

Coolant Solution Hanger Post - Suspends irrigation bag or bottle from console U370-152

Control Unit (100V) - DS100J Console U370-003*

Control Unit (120V) - DS100US Console U371-003

Control Unit (230V) - DS100RW Console U372-003*

Electrical Power Cord (100V) - Plugs into DS100J Console and appropriate wall outlet U389-013*

Electrical Power Cord (120V) - Plugs into DS100US Console and appropriate wall outlet U371-550

Electrical Power Cord (230V Europe) - Plugs into DS100RW Console and appropriate wall outlet U260-414*

Electrical Power Cord (230V Australia) - Plugs into DS100RW Console and appropriate wall outlet U198-013*

Irrigation Tube Holder - Holds irrigation tubing to handpiece Y900-083

Irrigation Tubing, Disposable/Clear (5-pack) - Connects between irrigation bag or bottle and For re-ordering,handpiece to provide irrigation flow refer to Y900-114.

Motor Cradle - Supports handpiece when not in use Z095-102

Handpiece Wench - Used to disassemble handpiece Z103-101

Spray Lubricant Nozzle - Attaches to lubricant to lubricate handpiece Z114-090

Nozzle Cleaning Fine Wire - Used to clean handpiece irrigation tube Z144-095

Foot Control (3.5m) - Connects to DS100 Console to provide foot activation Z272-004

The following items are not included in the OSSEOCISION Surgical Drilling Unit, but can be ordered separately throughCustomer Service.

Motor Cord - Plugs into DS100 Console and attaches to handpiece E211-051

Irrigation Tubing, Disposable/Clear (10-pack) - Connects between irrigation bag or bottle and handpiece to provide irrigation flow Y900-114

OSSEOCISION® Surgical Drilling Unit

*Not available in the United States. Refer to ART984 for the OSSEOCISION Warranty.

23



DDK210 DDKN215 DDKN2315 DDK215 DDK220

5-Pack Kits - 2.75mm Final Twist Drill For Up To 4mm(D) Implants

7-10mm 7-15mm 7-15mm 7-15mm 7-20mm Description Item Numbers

• • • • • Round Drill, 2mm DR100

• • • • • Pilot Drill, 2-3mm DP100

• Twist Drill, 2mm(D) x 15mm(L) (Non-Hubbed) DTN215

• Twist Drill, 2.3mm(D) x 15mm(L) (Non-Hubbed) DTN2315

• Twist Drill, 2.3mm(D) x 10mm(L) (Hubbed) DT210



3-Pack Kits - 2.3mm Final Twist Drill

DDK2710 DDK2715 DDK27207-10mm 7-15mm 7-20mm Description Item Numbers

• • • Round Drill, 2mm DR100

• • • Pilot Drill, 2-3mm DP100

• • • Countersink Drill DC100







Disposable Single-Patient-Use Drill Kits

24



DDK310 DDKN315 DDK315 DDK320

5-Pack Kits - 3mm Final Twist Drill For Up To 4mm(D) Implants

7-10mm 7-15mm 7-15mm 7-20mm Description Item Numbers

• • • • Round Drill, 2mm DR100

• • • • Pilot Drill, 2-3mm DP100

• • • • Countersink Drill DC100





• Twist Drill, 3mm(D) x 10mm(L) (Hubbed) DT310




5-Pack Kits - 3.25mm Final Twist Drill For Up To 4mm(D) Implants

DDK3210 DDK3215 DDK32207-10mm 7-15mm 7-20mm Description Item Numbers

• • • Round Drill, 2mm DR100

• • • Pilot Drill, 2-3mm DP100

• • • Countersink Drill DC100







Disposable Single-Patient-Use Drill Kits

25



SGTIKIT Tapered Navigator Surgical Kit

SGTIKITDescription Item NumbersSurgical Kit

• Tapered Navigator Surgical Tray SGTTRAY

• Tapered Navigator Tissue Punch, 4.1mm(D) SGTTP4

• Tapered Navigator Tissue Punch, 5mm(D) SGTTP5

• Tapered Navigator Cortical Perforator, 4.1mm(D) - Short SGTCP4S

• Tapered Navigator Cortical Perforator, 4.1mm(D) - Long SGTCP4L

• Tapered Navigator Cortical Perforator, 5mm(D) - Short SGTCP5S

• Tapered Navigator Cortical Perforator, 5mm(D) - Long SGTCP5L

• Tapered Navigator Twist Drill, 1.9mm(D) x A(L) SGTD19A

• Tapered Navigator Twist Drill, 1.9mm(D) x B(L) SGTD19B

• Tapered Navigator Twist Drill, 1.9mm(D) x C(L) SGTD19C

• Tapered Navigator Twist Drill, 1.9mm(D) x D(L) SGTD19D

• Tapered Navigator Twist Drill, 1.9mm(D) x E(L) SGTD19E

• Tapered Navigator Twist Drill, 1.9mm(D) x F(L) SGTD19F

• Tapered Navigator Twist Drill, 1.9mm(D) x G(L) SGTD19G

• Tapered Navigator Countersink Drill, 3.4mm(D) - Short MSGTCDS

• Tapered Navigator Countersink Drill, 4.1mm(D) - Short SGTCD4S

• Tapered Navigator Countersink Drill, 5mm(D) - Short SGTCD5S

• Tapered Navigator Countersink Drill, 3.4mm(D) - Long MSGTCDL

• Tapered Navigator Countersink Drill, 4.1mm(D) - Long SGTCD4L

• Tapered Navigator Countersink Drill, 5mm(D) - Long SGTCD5L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 8.5mm(L) - Short MSGTD85S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 10mm(L) - Short MSGTD10S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 11.5mm(L) - Short MSGTD11S



• Tapered Navigator Shaping Drill, 4.1mm(D) x 8.5mm(L) - Short SGTD485S

• Tapered Navigator Shaping Drill, 4.1mm(D) x 10mm(L) - Short SGTD410S

• Tapered Navigator Shaping Drill, 4.1mm(D) x 11.5mm(L) - Short SGTD411S



• Tapered Navigator Shaping Drill, 5mm(D) x 8.5mm(L) - Short SGTD585S

For Tapered Implants Including:

• Tapered Certain® 3.25, 4 and 5mm Implants• Tapered PREVAIL® 4/3 and 5/4 Implants

Tapered Navigator®SystemFor Guided Surgery

26




• Tapered Navigator® Shaping Drill, 5mm(D) x 10mm(L) - Short SGTD510S

• Tapered Navigator Shaping Drill, 5mm(D) x 11.5mm(L) - Short SGTD511S

• Tapered Navigator Shaping Drill, 5mm(D) x 13mm(L) - Short SGTD513S

• Tapered Navigator Shaping Drill, 5mm(D) x 15mm(L) - Short SGTD515S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 8.5mm(L) - Long MSGTD85L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 10mm(L) - Long MSGTD10L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 11.5mm(L) - Long MSGTD11L



• Tapered Navigator Shaping Drill, 4.1mm(D) x 8.5mm(L) - Long SGTD485L

• Tapered Navigator Shaping Drill, 4.1mm(D) x 10mm(L) - Long SGTD410L

• Tapered Navigator Shaping Drill, 4.1mm(D) x 11.5mm(L) - Long SGTD411L



• Tapered Navigator Shaping Drill, 5mm(D) x 8.5mm(L) - Long SGTD585L

• Tapered Navigator Shaping Drill, 5mm(D) x 10mm(L) - Long SGTD510L

• Tapered Navigator Shaping Drill, 5mm(D) x 11.5mm(L) - Long SGTD511L



• Tapered Navigator Twist Drill Positioning Handle SGTDPHT

• Tapered Navigator Reduction Drill Positioning Handle SGTDPHR

• Handpiece Connector MDR10

• Narrow Right Angle Large Hexed Driver Tip, 24mm(L) RASH3N

• Posterior Large Hexed Driver, 17mm(L) PHD02N

• Ratchet Extension, 6mm(L) - Short RE100

• Ratchet Extension, 15mm(L) - Long RE200

• Ratchet Wrench WR150

• Open End Wrench CW100

• Navigator Certain® Implant Mount, 3.4mm(D) - Short MSGIIMS

• Navigator Certain Implant Mount, 3.4mm(D) - Long MSGIIML

• Navigator Certain Implant Mount, 4.1mm(D) - Short SGIIM4S

• Navigator Certain Implant Mount, 4.1mm(D) - Long SGIIM4L

• Navigator Certain Implant Mount, 5mm(D) - Short SGIIM5S

• Navigator Certain Implant Mount, 5mm(D) - Long SGIIM5L

• Certain Manual Bone Profiler, 3.4mm(D) x 4.1mm(P) IMMBP

• Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P) IMBP4

• Certain Manual Bone Profiler, 5mm(D) x 6mm(P) IMBP5

Surgical Kit Cont’d

27




• Tapered Navigator Bone Tap Tray �SGTTAPT

• Tapered Navigator Bone Tap, 3.25mm(D) x 8.5mm(L) - Short MSGTT85S

• Tapered Navigator Bone Tap, 3.25mm(D) x 10mm(L) - Short MSGTT10S

• Tapered Navigator Bone Tap, 3.25mm(D) x 11.5mm(L) - Short MSGTT11S



• Tapered Navigator Bone Tap, 4.1mm(D) x 8.5mm(L) - Short SGTT485S

• Tapered Navigator Bone Tap, 4.1mm(D) x 10mm(L) - Short SGTT410S

• Tapered Navigator Bone Tap, 4.1mm(D) x 11.5mm(L) - Short SGTT411S



• Tapered Navigator Bone Tap, 5mm(D) x 8.5mm(L) - Short SGTT585S

• Tapered Navigator Bone Tap, 5mm(D) x 10mm(L) - Short SGTT510S

• Tapered Navigator Bone Tap, 5mm(D) x 11.5mm(L) - Short SGTT511S



• Tapered Navigator Bone Tap, 3.25mm(D) x 8.5mm(L) - Long MSGTT85L

• Tapered Navigator Bone Tap, 3.25mm(D) x 10mm(L) - Long MSGTT10L

• Tapered Navigator Bone Tap, 3.25mm(D) x 11.5mm(L) - Long MSGTT11L



• Tapered Navigator Bone Tap, 4.1mm(D) x 8.5mm(L) - Long SGTT485L

• Tapered Navigator Bone Tap, 4.1mm(D) x 10mm(L) - Long SGTT410L

• Tapered Navigator Bone Tap, 4.1mm(D) x 11.5mm(L) - Long SGTT411L



• Tapered Navigator Bone Tap, 5mm(D) x 8.5mm(L) - Long SGTT585L

• Tapered Navigator Bone Tap, 5mm(D) x 10mm(L) - Long SGTT510L

• Tapered Navigator Bone Tap, 5mm(D) x 11.5mm(L) - Long SGTT511L




• Certain® 3.25, 4 and 5mm Implants• Tapered PREVAIL® 4/3 and 5/4 Implants


Tapered Navigator Tap Kit(Included under SGTIKIT)

28



SGTILKIT

SGTILKITDescription Item NumbersSurgical Kit

• Tapered Navigator Laboratory Tray SGTLTRAY

• Navigator Certain Analog Mount, 3.4mm(D) - Short MSGIAMS

• Navigator Certain Analog Mount, 3.4mm(D) - Long MSGIAML

• Navigator Certain Analog Mount, 4.1mm(D) - Short SGIAM4S

• Navigator Certain Analog Mount, 4.1mm(D) - Long SGIAM4L

• Navigator Certain Analog Mount, 5mm(D) - Short SGIAM5S

• Navigator Certain Analog Mount, 5mm(D) - Long SGIAM5L


• Certain® 3.25, 4 and 5mm Implants• Tapered PREVAIL® 4/3 and 5/4 Implants


Tapered Navigator Laboratory Kit

29



SGKIT Navigator Parallel Walled Surgical Kit

SGKITDescription Item NumbersSurgical Kit

• Navigator Surgical Tray SGTRAY

• Navigator Tissue Punch, 4.1mm(D) SGTP4

• Navigator Tissue Punch, 5mm(D) SGTP5

• Navigator Starter Drill, 3.4mm(D) MSGSD

• Navigator Starter Drill, 3/4mm(D) SGSD34

• Navigator Starter Drill, 4.1mm(D) SGSD4

• Navigator Starter Drill, 4/5mm(D) SGSD45

• Navigator Certain Starter Drill, 5mm(D) SGISD5

• Navigator Twist Drill, 2mm(D) x A(L) SGD2A

• Navigator Twist Drill, 2mm(D) x B(L) SGD2B

• Navigator Twist Drill, 2mm(D) x C(L) SGD2C

• Navigator Twist Drill, 2mm(D) x D(L) SGD2D

• Navigator Twist Drill, 2mm(D) x E(L) SGD2E

• Navigator Twist Drill, 2.75mm(D) x A(L) SGD275A

• Navigator Twist Drill, 2.75mm(D) x B(L) SGD275B

• Navigator Twist Drill, 2.75mm(D) x C(L) SGD275C

• Navigator Twist Drill, 2.75mm(D) x D(L) SGD275D

• Navigator Twist Drill, 2.75mm(D) x E(L) SGD275E

• Navigator Twist Drill, 3mm(D) x A(L) SGD3A

• Navigator Twist Drill, 3mm(D) x B(L) SGD3B

• Navigator Twist Drill, 3mm(D) x C(L) SGD3C

• Navigator Twist Drill, 3mm(D) x D(L) SGD3D

• Navigator Twist Drill, 3mm(D) x E(L) SGD3E




• Navigator Twist Drill, 3.25mm(D) x D(L) SGD325D

• Navigator Twist Drill, 3.25mm(D) x E(L) SGD325E





For Parallel Walled Implants Including:

• Certain® 3.25, 4 and 5mm Implants• PREVAIL® 3/4/3 and 4/5/4 Implants• OSSEOTITE XP® 4/5 Implants• Straight PREVAIL 4/3 and 5/4 Implants

Parallel WalledNavigator® SystemFor Guided Surgery

30



SGKITDescription Item NumbersSurgical Kit

• Navigator® Twist Drill, 4.25mm(D) x B(L) SGD425B


• Navigator Bone Tap, 3.25mm(D) MSGTAP

• Navigator Bone Tap, 4.1mm(D) SGTAP4

• Navigator Bone Tap, 4/5mm(D) SGTAP45

• Navigator Bone Tap, 5mm(D) SGTAP5

• Navigator Drill Positioning Handle 1 SGDPH1





• Certain® Manual Bone Profiler, 3.4mm(D) x 4.1mm(P) IMMBP

• Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P) IMBP4

• Certain Manual Bone Profiler, 5mm(D) x 6mm(P) IMBP5


• Open End Wrench CW100

• Ratchet Wrench WR150

• Handpiece Connector MDR10

• Posterior Large Hexed Driver, 17mm(L) PHD02N

• Ratchet Extension - Short, 6mm(L) RE100

• Ratchet Extension - Long, 15mm(L) RE200

• Navigator Certain Implant Mount, 3.4mm(D) x 1(L) MSGIIM1




• Navigator Certain Implant Mount, 4.1mm(D) x 1(L) SGIIM41




• Navigator Certain Implant Mount, 5mm(D) x 1(L) SGIIM51




The following items are not included in the Navigator Surgical Kit, but can be ordered separately, as needed, throughCustomer Service.

Navigator Twist Drill, 2mm(D) x Y(L) SGD2Y

Navigator Twist Drill, 2mm(D) x Z(L) SGD2Z

Navigator Twist Drill, 2.75mm(D) x Y(L) SGD275Y

Navigator Twist Drill, 2.75mm(D) x Z(L) SGD275Z

Navigator Twist Drill, 3mm(D) x Y(L) SGD3Y

Navigator Twist Drill, 3mm(D) x Z(L) SGD3Z







Description Item Numbers Description Item Numbers

Surgical Kit Cont’d

31



SGLKIT Navigator Parallel Walled Laboratory Kit

SGLKITDescription Item NumbersLaboratory Kit

• Navigator Laboratory Tray SGLTRAY

• Navigator Certain® Analog Mount, 3.4mm(D) x 1(L) MSGIAM1

• Navigator Certain Analog Mount, 3.4mm(D) x 2(L) MSGIAM2



• Navigator Certain Analog Mount, 4.1mm(D) x 1(L) SGIAM41




• Navigator Certain Analog Mount, 5mm(D) x 1(L) SGIAM51




31-3100 BIOMET 2mm Fixation SystemTo order, call 1-800-874-7711www.BiometMicrofixation.com

Parallel WalledNavigator® SystemFor Guided Surgery

32



QNTSK40 Premium KitTapered Implant Surgical Kits

QNTSK20 QNTSK40U QNTSK40Starter (Basic) Kit Upgrade Kit Premium Kit Description Item Numbers

• • Quad Shaping Drill, 3.25mm(D) x 8.5mm(L) QSD3285

• • • Quad Shaping Drill, 3.25mm(D) x 10mm(L) QSD3210

• • • Quad Shaping Drill, 3.25mm(D) x 11.5mm(L) QSD3211

• • • Quad Shaping Drill, 3.25mm(D) x 13mm(L) QSD3213

• • Quad Shaping Drill, 3.25mm(D) x 15mm(L) QSD3215

• • Quad Shaping Drill, 4mm(D) x 8.5mm(L) QSD485

• • • Quad Shaping Drill, 4mm(D) x 10mm(L) QSD410

• • • Quad Shaping Drill, 4mm(D) x 11.5mm(L) QSD411


• • Quad Shaping Drill, 4mm(D) x 15mm(L) QSD415



• • • Quad Shaping Drill, 5mm(D) x 11.5mm(L) QSD511








• • Dense Bone Tap, 3.25mm(D) x 8.5mm(L) NTAP3285

• • • Dense Bone Tap, 3.25mm(D) x 10mm(L) NTAP3210

• • • Dense Bone Tap, 3.25mm(D) x 11.5mm(L) NTAP3211

• • • Dense Bone Tap, 3.25mm(D) x 13mm(L) NTAP3213

• • Dense Bone Tap, 3.25mm(D) x 15mm(L) NTAP3215

• • Dense Bone Tap, 4mm(D) x 8.5mm(L) NTAP485

• • • Dense Bone Tap, 4mm(D) x 10mm(L) NTAP410

• • • Dense Bone Tap, 4mm(D) x 11.5mm(L) NTAP411


• • Dense Bone Tap, 4mm(D) x 15mm(L) NTAP415



33



Tapered Surgical Kits Cont’d


• • • Dense Bone Tap, 5mm(D) x 11.5mm(L) NTAP511








• • • Tapered Implant Dense Bone Tap Kit Tray NTAPKT

• • Tapered Implant Depth Indicator, 3.25mm(D) x 8.5mm(L) 3ea. NTDI3285

• • • Tapered Implant Depth Indicator, 3.25mm(D) x 10mm(L) NTDI3210

• • • Tapered Implant Depth Indicator, 3.25mm(D) x 11.5mm(L) NTDI3211

• • • Tapered Implant Depth Indicator, 3.25mm(D) x 13mm(L) NTDI3213

• • Tapered Implant Depth Indicator, 3.25mm(D) x 15mm(L) NTDI3215

• • Tapered Implant Depth Indicator, 4mm(D) x 8.5mm(L) 3ea. NTDI485

• • • Tapered Implant Depth Indicator, 4mm(D) x 10mm(L) NTDI410

• • • Tapered Implant Depth Indicator, 4mm(D) x 11.5mm(L) NTDI411


• • Tapered Implant Depth Indicator, 4mm(D) x 15mm(L) NTDI415



• • • Tapered Implant Depth Indicator, 5mm(D) x 11.5mm(L) NTDI511





• • Tapered Implant Depth Indicator, 6mm(D) x 11.5mm(L) NTDI611



• • • Certain® Countersink Drill, PREVAIL® 3/4/3mm(P) ICD100

• • QSD/NTDI Surgical Tray w/Plastic Insert QNTSKT

• • Open End Wrench CW100

• • Ratchet Wrench WR150

• • Ratchet Extension (Short), 6mm(L) RE100

• • Ratchet Extension (Long), 15mm(L) RE200

• • Implant Depth Gauge, 20mm(L) DP020

34



Tapered Surgical Kits Cont’d


• • Narrow Posterior Hexed Driver, 17mm(L) PHD00N

• • Posterior Large Hexed Driver, 17mm(L) PHD02N


• Direction Indicator, 2mm(D) x 10mm(L) 3ea. DI100

• • Handpiece Connector MDR10

• • Implant Mount, 3.4mm(D) x 15mm(L) MMC15

• • ACT® Pointed Starter Drill ACTPSD

• • ACT Reusable Twist Drill, 2mm(D) x 10mm(L) ACT2010



• • ACT Drill Extension ACTDE

• • Certain® Implant Placement Driver Tip (Short), 4.1, 5, 6mm(D) IIPDTS

• • Certain Placement Driver Tip (Short), 3.4mm(D) IMPDTS

• • Certain Implant Placement Driver Tip (Long), 4.1, 5, 6mm(D) IIPDTL

• • Certain Implant Placement Driver Tip (Long), 3.4mm(D) IMPDTL

• • Certain Universal Ratchet Extension Driver (Short), 6mm(L) IRE100U

• • Certain Universal Ratchet Extension Driver (Long) 15mm(L) IRE200U

• • Certain Driver Replacement O-Rings, 10-Pack IRORDR

35



PSKT01 PSKT35 PSKT40Starter (Basic) Kit Certain®Premium Kit Premium Kit Description Item Numbers

• • • Plastic Surgical Tray Organizer PTT300I

• Plastic Tray Organizer for PTT300I PTT100

• • ACT® Reusable Twist Drill, 2mm(D) x 10mm(L) ACT2010

• • • ACT Reusable Twist Drill, 2mm(D) x 15mm(L) ACT2015


• • ACT Reusable Twist Drill, 2.75mm(D) x 10mm(L) ACT2710

• • • ACT Reusable Twist Drill, 2.75mm(D) x 15mm(L) ACT2715

• ACT Reusable Twist Drill, 2.75mm(D) x 20mm(L) ACT2720


• • • ACT Reusable Twist Drill, 3mm(D) x 15mm(L) ACT3015

• ACT Reusable Twist Drill, 3mm(D) x 20mm(L) ACT3020







• • ACT Reusable Twist Drill, 4.25mm(D) x 8.5mm(L) ACT4285









• • • ACT Drill Extension ACTDE

• • Countersink Drill, OSSEOTITE XP® 4/5, PREVAIL® 4/5/4 CD4500

• • • Countersink Depth Indicator for CD4500 CDI4500

• • • Countersink/Pilot Drill, 5mm(D) CD500

• • Countersink Drill, OSSEOTITE XP 5/6, PREVAIL 5/6/5 CD5600

PSKT40 Premium KitParallel Walled Surgical Kits

36



PSKT01 PSKT35 PSKT40Starter (Basic) Kit Certain®Premium Kit Premium Kit Description Item Numbers

• • • Countersink Depth Indicator for CD5600 CDI5600

• • • Certain® Countersink Drill, PREVAIL® 3/4/3 ICD100

• • • Countersink Depth Indicator for ICD100 ICDI100

• • Countersink Drill, 4.1mm CD100

• • Countersink/Pilot Drill, 6mm(D) CD600

• • • Pilot Drill, 2-3mm(D) PD100

• • Implant Dense Bone Tap, 3.25mm(D) x 18mm(L) MTAP2

• • Implant Dense Bone Tap, 4mm(D) x 13mm(L) TAP413

• • Implant Dense Bone Tap, 5mm(D) x 13mm(L) TAP53S

• Implant Dense Bone Tap, 6mm(D) x 13mm(L) TAP63S

• • OSSEOTITE® 2 Dense Bone Tap, 5mm(D) x 7-13mm(L) XTAP53S

• OSSEOTITE 2 Dense Bone Tap, 6mm(D) x 7-13mm(L) XTAP63S

• • Certain Implant Driver Tip (Short), 3.4mm(D) IMPDTS

• • • Certain Implant Driver Tip (Long), 3.4mm(D) IMPDTL

• • • Certain Implant Placement Driver Tip (Short), 4.1, 5, 6mm(D) IIPDTS

• • • Certain Implant Placement Driver Tip (Long), 4.1, 5, 6mm(D) IIPDTL

• • • Certain Universal Ratchet Extension Driver (Short), 6mm(L) IRE100U

• • • Certain Universal Ratchet Extension Driver (Long), 15mm(L) IRE200U

• • Narrow Small Hex Hand Driver, 17mm(L) PHD00N

• • • Narrow Large Hex Hand Driver, 17mm(L) PHD02N

• • • Narrow Large Hex Driver, Tip 24mm(L) RASH3N

• • Driver Tip Replacement O-Rings, 10-Pack IRORDR

• • • Handpiece Connector MDR10

• • Open End Wrench CW100

• • • Ratchet Wrench WR150

• • Ratchet Extension (Short), 6mm(L) RE100

• • • Ratchet Extension (Long), 15mm(L) RE200

• • • Implant Depth Gauge, 20mm(L) DP020


• • • Direction Indicator, 2mm(D) x 10mm(L) 3ea. DI100

• • • Stainless Steel Round Drill, 2mm(D) RD100

Parallel Walled Surgical Kits Cont’d

37



PSKT10 PSKT20 PSKT30 PSKT30UStarter (Basic) Kit Standard Kit Premium Kit Upgrade Kit Description Item Numbers

• Plastic Insert for Tray PTT300UI

• • • Plastic Surgical Tray Organizer PTT300I

• • Plastic Organizer Tray for PTT300I PTT100

• • ACT® Reusable Twist Drill, 2mm(D) x 10mm(L) ACT2010












• ACT Reusable Twist Drill, 4.25mm(D) x 8.5mm(L) ACT4285



• ACT Reusable Twist Drill, 5.25mm(D) x 8.5mm(L) ACT5285



• • ACT Drill Extension ACTDE

• • Pilot Drill, 2-3mm(D) PD100

• • Countersink Drill, 4.1mm CD100

• Certain® Countersink Drill, PREVAIL® 3/4/3 ICD100

• Countersink Drill, OSSEOTITE XP® 4/5, PREVAIL 4/5/4 CD4500

• Countersink/Pilot Drill, 5mm(D) CD500

• Countersink Drill, OSSEOTITE XP 5/6, PREVAIL 5/6/5 CD5600

• Countersink/Pilot Drill, 6mm(D) CD600

• • Implant Dense Bone Tap, 3.25mm(D) x 18mm(L) MTAP2

• • Implant Dense Bone Tap, 4mm(D) x 13mm(L) TAP413



• OSSEOTITE® 2 Dense Bone Tap, 5mm(D) x 7-13mm(L) XTAP53S

• OSSEOTITE 2 Dense Bone Tap, 6mm(D) x 7-13mm(L) XTAP63S

• Certain Implant Driver Tip (Short), 3.4mm(D) IMPDTS

• Certain Implant Driver Tip (Long), 3.4mm(D) IMPDTL

Parallel Walled Surgical Kits

38



PSKT10 PSKT20 PSKT30 PSKT30U

Parallel Walled Surgical Kits Cont’d

Starter (Basic) Kit Standard Kit Premium Kit Upgrade Kit Description Item Numbers

• Certain® Implant Placement Driver Tip (Short), 4.1, 5, 6mm(D) IIPDTS

• Certain Implant Placement Driver Tip (Long), 4.1, 5, 6mm(D) IIPDTL

• Certain Universal Ratchet Extension Driver (Short), 6mm(L) IRE100U

• Certain Universal Ratchet Extension Driver (Long), 15mm(L) IRE200U

• • • Narrow Small Hexed Hand Driver, 17mm(L) PHD00N

• • • Narrow Large Hexed Hand Driver, 17mm(L) PHD02N

• • • Narrow Large Hex Driver Tip, 24mm(L) RASH3N

• Driver Tip Replacement O-Rings, 10-pack IRORDR

• • • Handpiece Connector MDR10

• • • Open End Wrench CW100

• • • Ratchet Wrench WR150

• • • Ratchet Extension (Short), 6mm(L) RE100

• • • Ratchet Extension (Long), 15mm(L) RE200

• • • Implant Depth Gauge, 20mm(L) DP020


• • Direction Indicator, 2mm(D) x 10mm(L) 3ea. DI100

• • Stainless Steel Round Drill, 2mm(D) RD100

Plastic Tray OrganizerPTT100NOTE: For use with PTT300I

39



ACT® Non-Irrigated Twist Drills

7 – 8.5mm 8.5mm N/A N/A N/A N/A N/A N/A N/A ACT4285 ACT4885 ACT5285

7 – 10mm 10mm ACT2010 N/A ACT2710 ACT3010 ACT3110 ACT3210 ACT3810 N/A N/A N/A

7 – 13mm 13mm N/A N/A N/A N/A N/A N/A N/A ACT4213 ACT4813 ACT5213


7 – 18mm 18mm N/A N/A N/A N/A N/A N/A N/A ACT4218 ACT4818 ACT5218


ImplantLengths

DrillLengths 2mm(D) 2.3mm(D) 2.75mm(D) 3mm(D) 3.15mm(D) 3.25mm(D) 3.85mm(D) 4.25mm(D) 4.85mm(D) 5.25mm(D)

Irrigated, Hubbed Twist Drills

7 – 8.5mm 8.5mm N/A N/A N/A N/A N/A N/A N/A ITD428 N/A ITD528

7 – 10mm 10mm N/A ITD210 ITD2710 ITD310 ITD3110 ITD3210 N/A N/A N/A N/A

7 – 13mm 13mm N/A N/A N/A N/A N/A N/A N/A ITD423 N/A ITD523


7 – 18mm 18mm N/A N/A N/A N/A N/A N/A N/A ITD4218 N/A ITD5218


Non-Irrigated, Hubbed Twist Drills

7 – 8.5mm 8.5mm N/A N/A N/A N/A N/A N/A N/A DT428 N/A DT528

7 – 10mm 10mm DT2010 DT210 DT2710 DT310 DT3110 DT3210 N/A N/A N/A N/A

7 – 13mm 13mm N/A N/A N/A N/A N/A N/A N/A DT423 N/A DT523


7 – 18mm 18mm N/A N/A N/A N/A N/A N/A N/A DT4218 N/A DT5218


ImplantLengths

DrillLengths 2mm(D) 2.3mm(D) 2.75mm(D) 3mm(D) 3.15mm(D) 3.25mm(D) 3.85mm(D) 4.25mm(D) 4.85mm(D) 5.25mm(D)

Non-Irrigated, Non-Hubbed Twist Drills

7 – 8.5mm 8.5mm N/A N/A N/A N/A N/A N/A N/A DTN428 N/A DTN528

7 – 10mm 10mm DTN210 DTN2310 DTN2710 DTN310 DTN3110 DTN3210 N/A N/A N/A N/A

7 – 13mm 13mm N/A N/A N/A N/A N/A N/A N/A DTN423 N/A DTN523


7 – 18mm 18mm N/A N/A N/A N/A N/A N/A N/A DTN4218 N/A DTN5218


Reusable Twist Drills

Disposable Twist Drills

40



Quad Shaping DrillsFor Tapered Implants

Drill Lengths 3.25mm (D) 4mm (D) 5mm (D) 6mm (D) 6

8.5mm QSD3285 QSD485 QSD585 QSD685

10mm QSD3210 QSD410 QSD510 QSD610

11.5mm QSD3211 QSD411 QSD511 QSD611



Drills

Description Disposable Reusable

Round Drill, 2mm DR100 RD100

ACT® Pointed Starter Drill N/A ACTPSD

Pilot Drill, 2-3mm DP100 PD100

Countersink Drill - External Connection, 4.1mm DC100 CD100

Countersink Drill - Certain® Connection, 4.1mm N/A ICD100

Countersink Drill, 4/5mm N/A CD4500

Countersink/Pilot Drill, 5mm DC500 CD500

Countersink Drill, 5/6mm N/A CD5600

Countersink/Pilot Drill, 6mm DC600 CD600

Surgical Drills

41




2.3 – 3.25mm(D) x 10mm(L) DS2310

2.3 – 3.25mm(D) x 15mm(L) DS2315

2.3 – 3.25mm(D) x 20mm(L) DS2320

4.25 – 5.25mm(D) x 8.5mm(L) DS458

4.25 – 5.25mm(D) x 13mm(L) DS4513

4.25 – 5.25mm(D) x 18mm(L) DS4518

Drill Stops

3.4mm(D) x 3.8mm(P) BP340

OSSEOTITE XP® 3/4, 4.1mm(D) x 5mm(P) BP450

OSSEOTITE XP 3/4, 4.1mm(D) x 6mm(P) BP460

OSSEOTITE XP 3/4, 4.1mm(D) x 7.5mm(P) BP475

OSSEOTITE XP 4/5, 5mm(D) x 5mm(P) BP550


OSSEOTITE XP 4/5, 5mm(D) x 7.5mm(P) BP575


OSSEOTITE XP 5/6, 6mm(D) x 7.5mm(P) BP675

Low Profile Abutment Bone Profiler, 3.4mm(D) LPCBP3

Low Profile Abutment Bone Profiler, 4.1mm(D) LPCBP4

Low Profile Abutment Bone Profiler, 5mm(D) LPCBP5

Certain® Manual Bone Profiler, 3.4mm(D) x 4.1mm(P) IMMBP

Certain Manual Bone Profiler, 3.4mm(D) x 5mm(P) IMMBP35

Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P) IMBP4

Certain Manual Bone Profiler, 5mm(D) x 6mm(P) IMBP5

Certain Low Profile Abutment Manual Bone Profiler, 3.4mm(D) ILPCMBP3

Certain Low Profile Abutment Manual Bone Profiler, 4.1mm(D) ILPCMBP4

Certain Low Profile Abutment Manual Bone Profiler, 5mm(D) ILPCMBP5

Bone Profiler Guide, 4.1, 5, 6mm(D) BPGUIDE

Bone Profiler Organizer Box, 4.1mm(D) BPKITB

Bone Profiler Organizer Box, 5, 6mm(D) BPAKTB

Bone Profiler Organizer Kit BB001

Bone Profiler Kit - For use with 4.1mm(D) Implants BPKITContains: BP450, BP460, BP475, BB001

Bone Profiler Kit - For use with 5mm(D) or 6mm(D) Implants BPAKTContains: BP550, BP560, BP575, BP660, BP675, BB001

Guide Pins are included in all External Connection Bone Profiler Components andKits. For Certain Internal Connections, please order the appropriate Certain BoneProfiler Guide Pin listed below.

Certain Bone Profiler Guide Pin, 3.25mm(D) 3pk IBPMGP

Certain Bone Profiler Guide Pin, 4.1, 5, 6mm(D) 3pk IBPGP

Bone ProfilersDescription Item Numbers

Surgical Components

42



Bone Taps

Implant Lengths 3.25mm (D) 3.75mm (D) 4mm (D) 5mm (D) 6mm (D)

8.5 – 18mm MTAP1 (18mmL) N/A N/A N/A N/A

8.5 – 18mm MTAP2 (27mmL) N/A N/A N/A N/A

7 – 10mm N/A TAP10 TAP410 N/A N/A



7 – 8.5mm N/A N/A N/A TAP58S TAP68S

7 – 13mm N/A N/A N/A TAP53S TAP63S

7 – 18mm N/A N/A N/A TAP518S TAP618S

Bone Taps

6.5/7 – 8.5mm N/A N/A N/A XTAP58S XTAP68S

6.5/7 – 13mm N/A N/A N/A XTAP53S XTAP63S

6.5/7 – 18mm N/A N/A N/A XTAP518S XTAP618S

Implant Lengths 3.25mm (D) 4mm (D) 5mm (D) 6mm (D)

8.5mm NTAP3285 NTAP485 NTAP585 NTAP685

10mm NTAP3210 NTAP410 NTAP510 NTAP610

11.5mm NTAP3211 NTAP411 NTAP511 NTAP611



Dense Bone Taps ForTapered Implants

NTAPK Dense Bone Tap KitNOTE: Kit includes all of the Dense Bone Taps listed above.

Surgical Components

43



Depth/Direction IndicatorsFor Tapered Implants

Implant Lengths 3.25mm (D) 4mm (D) 5mm (D) 6mm (D)

8.5mm NTDI3285 NTDI485 NTDI585 NTDI685

10mm NTDI3210 NTDI410 NTDI510 NTDI610

11.5mm NTDI3211 NTDI411 NTDI511 NTDI611



NTDIK Depth/Direction Indicator KitNOTE: Kit includes all of the indicators listed above.

Surgical Components

44



DI100 2mm/3mm(D) x 10mm(L) 2mm/3mm(D) x 15mm(L) DI2310 2.3mm/3mm(D) x 10mm(L)Anodized Blue

DI2315 2.3mm/3mm(D) x 15mm(L)Anodized Gold

DI200

3

2

33

2.3

2

3

Direction Indicators

2.3

IC015 15mm(L) ImplantMount

3

3.4

3.1

4.8

3.1

3.4

15

4.8

3.1

4.5

15

4.8

Mounts

IDIKT Certain® DirectionIndicator Kit

IDI00110mm(L)

IDIM0110mm(L)

For 3.25mm(D)Implant

3.4mm(D) ImplantMount Kit

MMKIT

3mm(L)MMC03

15mm(L)MMC15

Includes2 each of:

➥

➥

Countersink DepthIndicator For PREVAIL®

Implants

CDI45004/5/4mm(P)Implant AndCD4500

CountersinkDrill

5/6/5mm(P)Implant AndCD5600

CountersinkDrill

CDI5600

Surgical Components


45



ART1025 Certain® PREVAIL® Expanded Platform ImplantsOSSEOTITE XP® Certain ImplantsOSSEOTITE XP External Connection Implants

3.25

mm

Impl

antB

ody

/4.0

mm

Colla

r

ACTUAL SIZE

0 5 10 15 20 25

8.5mm7mm 10mm 11.5mm 13mm 15mm 18mm

5MM RADIOGRAPHIC BALL 3/4/3mm and 3/4mm Implants


25% LARGERTHAN ACTUAL SIZE

0 5 10 15 20 25


Drill Tip Depth Mark(≤1.3mm)

4.0m

mIm

plan

tBod

y/5

.0m

mCo

llar

ACTUAL SIZE

0 5 10 15 20 25

8.5mm7mm 10mm 11.5mm 13mm 15mm




0 5 10 15 20 25



5.0m

mIm

plan

tBod

y/6

.0m

mCo

llar

ACTUAL SIZE

0 5 10 15 20 25





0 5 10 15 20 25



ART1036 Certain And External Connection Tapered Implants ART1037 Certain Parallel Walled And Straight CollarCertain PREVAIL Implants

3.25

mm

Impl

antB

ody

ACTUAL SIZE

0 5 10 15 20 25

5MM RADIOGRAPHIC BALL



0 5 10 15 20 25

3.25mm Implants

3.25mm Implants




3.75

mm

Impl

antB

ody

ACTUAL SIZE

0 5 10 15 20 25




0 5 10 15 20 25

3.75mm Implants

3.75mm Implants

8.5mm7mm 10mm 11.5mm 13mm 15mm 18mm 20mm

7mm 8.5mm 10mm 11.5mm 13mm 15mm 18mm 20mm


4.0m

mIm

plan

tBod

y

ACTUAL SIZE

0 5 10 15 20 25




0 5 10 15 20 25

4.0mm Implants

4.0mm Implants




Radiographic Transparencies

ART1027 External Connection Parallel Walled Implants

5.0m

mIm

plan

tBod

y

5.0mm Implants

5.0mm Implants

7mm 8.5mm 10mm 11.5mm 13mm 15mm 18mm

7mm 8.5mm 10mm 11.5mm 13mm 15mm 18mmACTUAL SIZE

0 5 10 15 20 25




0 5 10 15 20 25


6.0m

mIm

plan

tBod

y

6.0mm Implants

6.0mm Implants

ACTUAL SIZE

0 5 10 15 20 25




0 5 10 15 20 25

7mm 8.5mm 10mm 11.5mm 13mm 15mm 18mm

7mm 8.5mm 10mm 11.5mm 13mm 15mm 18mm


Surgical Components

Radiographic Transparency ForCertain® And External Connection Tapered Implants

This transparency should only be used as a reference guide in conjunction with the use of a 5mm Radiographic Ball.Twist drill length, including the tip, exceeds the implant dimensions represented and must also be taken into account during treatment planning.

8.5mm 10mm 11.5mm 13mm 15mm

3.25mm Implants

3.25mm Implants

8.5mm 10mm 11.5mm 13mm 15mm

3.25mm Implant Body

8.5mm 10mm 11.5mm 13mm 15mm

5.0mm Implants

5.0mm Implants

8.5mm 10mm 11.5mm 13mm 15mm

ACTUAL SIZE

0 5 10 15 20 25


5.0mm Implant Body

8.5mm 10mm 11.5mm 13mm 15mm

4.0mm Implants

4.0mm Implants

8.5mm 10mm 11.5mm 13mm 15mm

4.0mm Implant Body

8.5mm 10mm 11.5mm 13mm 15mm

6.0mm Implants

6.0mm Implants

8.5mm 10mm 11.5mm 13mm 15mm



0 5 10 15 20 25



0 5 10 15 20 25

6.0mm Implant Body

ACTUAL SIZE

0 5 10 15 20 25


ACTUAL SIZE

0 5 10 15 20 25




0 5 10 15 20 25



0 5 10 15 20 25

ACTUAL SIZE

0 5 10 15 20 25


BIOMET 3i4555 Riverside DrivePalm Beach Gardens, FL 334101-800-342-5454Outside The U.S.: +1-561-776-6700Fax: +1-561-776-1272www.biomet3i.com

BIOMET 3iEurope, Middle East & AfricaWTC Almeda Park, Ed. 1, Planta 1ªPl. de la Pau, s/n08940, Cornellà de Llobregat(Barcelona) SpainPhone: +34-93-470-55-00Fax: +34-93-371-78-49

EC REP

REV B 06/10ART1036

Certain is a registered trademark of BIOMET 3i LLC. BIOMET is a registered trademark and BIOMET 3iand design are trademarks of BIOMET, Inc. ©2011 BIOMET 3i LLC. All rights reserved.


Radiographic Transparency ForCertain® Parallel Walled And Straight Collar Certain® PREVAIL® Implants

This transparency should only be used as a reference guide in conjunction with the use of a 5mm Radiographic Ball.Twist drill length, including the tip, exceeds the implant dimensions represented and must also be taken into account during treatment planning.

8.5mm 10mm 11.5mm 13mm 15mm 18mm

3.25mm Implants

3.25mm Implants

8.5mm 10mm 11.5mm 13mm 15mm 18mm

3.25mm Implant Body

8.5mm 10mm 11.5mm 13mm 15mm

5mm Implants

5mm Implants

8.5mm 10mm 11.5mm 13mm 15mm

ACTUAL SIZE

0 5 10 15 20 25

5mm Radiographic Ball

5mm Implant Body

8.5mm 10mm11.5mm 13mm 15mm 18mm 20mm

4mm Implants

4mm Implants

8.5mm 10mm 11.5mm 13mm 15mm 18mm 20mm

4mm Implant Body

8.5mm 10mm 11.5mm 13mm 15mm

6mm Implants

6mm Implants

8.5mm 10mm 11.5mm 13mm 15mm



0 5 10 15 20 25



0 5 10 15 20 25

6mm Implant Body

ACTUAL SIZE

0 5 10 15 20 25


ACTUAL SIZE

0 5 10 15 20 25




0 5 10 15 20 25



0 5 10 15 20 25

ACTUAL SIZE

0 5 10 15 20 25

5.0mm Radiographic Ball

BIOMET 3i4555 Riverside DrivePalm Beach Gardens, FL 334101-800-342-5454Outside The U.S.: +1-561-776-6700Fax: +1-561-776-1272www.biomet3i.com

BIOMET 3iEurope, Middle East & AfricaWTC Almeda Park, Ed. 1, Planta 1ªPl. de la Pau, s/n08940, Cornellà de Llobregat(Barcelona) SpainPhone: +34-93-470-55-00Fax: +34-93-371-78-49

EC REP

REV B 10/1ART1037

Certain, PREVAIL and Providing Solutions – One Patient At A Time are registered trademarks ofBIOMET 3i LLC. BIOMET is a registered trademark and BIOMET 3i and design are trademarks ofBIOMET, Inc. ©2011 BIOMET 3i LLC. All rights reserved.


46



H-TIRW High Torque Indicating Ratchet Wrench

C9980

L-TIRWK

L-TIRW Low Torque Indicating Ratchet WrenchLow Torque Indicating Ratchet Wrench Kit

CW100 Open End WrenchFor use with External Connection Implants.

MALL1 MalletStainless Steel

TE003 Titanium Elevator

TST01

WR150 Ratchet Wrench

TF002 Titanium Forceps

DPO2O

Miscellaneous Instrumentation

Titanium Suction Tip Implant Depth Gauge

Surgical Components

Standard ISO1797 Adapter

C9981Short ISO

1797 Adapter

47



ACTDE ACT® Drill Extension


5mm(D)

8mm

6mm

4mm

2mm

MDR10 Handpiece Connector

RMB30 Radiographic Marking Balls (30-PK)

6

23

Manual Interchangeable Driver Tip HandleMIDTH

IC100 Surgical Index CopingTissue Measuring PostTMP80

Surgical Components

48



2.39 x10mm(L)

Tissue PunchTP001

5mm

4.1mm

TP005

6mmTP006

Certain® Implant Placement Driver TipIIPDTL

Short

Long

IIPDTS

3.4mm(D)Long

3.4mm(D)Short

IMPDTL

IMPDTS

Ratchet Extensions

6mm(L)15mm(L)

IRE100UIRE200U

RE100RE200

Gelb Radiographic Depth Gauge KitXDG00

2.3mm(D)XDG01

2mm(D)x 13mm(L)XDG13

2mm(D)x 20mm(L)XDG20

2.3mm(D)x 13mm(L)XDG2313

2.3mm(D)x 20mm(L)XDG2320

Certain Implant Driver Replacement O-Rings(Qty: 10)

IRORDR

Includes:

Includes:

➥

➥

➥

➥

SGT25 Stent Guide TubesStainless Steel (25-PK)


Surgical Components

49



Straight OSSEOTITE® Tapered Osteotome Kit NTOST0

Angled OSSEOTITE Tapered Osteotome Kit NTOST0A

Straight OSSEOTITE Tapered, 3.25mm(D) Osteotome NTOST3

Straight OSSEOTITE Tapered, 4mm(D) Osteotome NTOST4



Angled OSSEOTITE Tapered, 3.25mm(D) Osteotome NTOST3A

Angled OSSEOTITE Tapered, 4mm(D) Osteotome NTOST4A



Straight OSSEOTITE Tapered Osteotome Tray NTOSTTRS

Angled OSSEOTITE Tapered Osteotome Tray NTOSTTRA


Summers Osteotome Kit #1-4 OST00

Summers Osteotome Kit #1-5 OST10

Summers Osteotome Kit #1-5, FS OST20

Summers Osteotome #1 OST01





Summers Osteotome For Future Site OSTFS

Summers Osteotome System Tray OSTTR


Site Preparation Components

Straight And Angled Osteotomes

Summer Osteotomes

50



TIBC1 ME100 ME200 ME300 TIPL1 TIPS1 TRE02 TRE04 TRE05 TRE06 TRE08

Sinus Elevators Trephine Burs


Sinus Elevation Kit SEKT1

Titanium Nitride Coated Bone Carrier TIBC1

Small Membrane Elevator ME100

Medium Membrane Elevator ME200

Large Membrane Elevator ME300

Large Titanium Plugger TIPL1

Small Titanium Plugger TIPS1

Sinus Elevation Tray SEKTR

Site Preparation Components

Sinus Elevation

Trephine BursDescription Item Numbers

Trephine Bur, 2mm Inside Diameter/3mm Outside Diameter TRE02




Trephine Bur, 8mm Inside Diameter/9.3mm Outside Diameter TRE08

51

Regenerative Technologies

Endobon® Xenograft GranulesA RegenerOss® Product• Bovine-derived Hydroxyapatite• Osteoconductive material for bony in-growth• 500–1000µm and 1000–2000µm particle sizes for dental applications

• High porosity with interconnecting macro and micropores• New, easy to use packaging

Manufactured By Biomet France Sarl

RegenerOss AllograftThe options you want. The results you expect. The safetyyou demand.• Cortical or cancellous bone: mineralized or demineralized• Three particle ranges: 200–300, 300–500, 500–800 microns• Consistency from lot-to-lot• Packaging is designed for ease of handling and quick, convenient reconstitution

• Donors are extensively screened and tested• Aseptically processed and irradiated products available

Manufactured By The University of Miami Tissue Bank

OsseoGuard® Resorbable Collagen MembraneThe protection you need to grow.• Dental barrier for guided bone regeneration• Type I collagen bovine source• Strong enough to resist tearing when tacked or sutured, yetpliable for easy placement

• Resorption profile of 6-9 months• Does not require removal when exposed

Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

OsseoGuard Flex® Resorbable Collagen MembraneCreating balance between flexibility and resorption profile.• Same clinical benefits as OsseoGuard• Flexible, yet won’t fold over onto itself• Type I and III bovine dermis

Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Product Overview

52


Safescraper® TWISTCortical bone scraper/collector• Unique design provides 160° cutting area and facilitatesaccess to difficult posterior regions

• Effectively harvests up to 5cc of bone• Contains bone in a sterile exclusive chamber, which isdesigned to protect patients from cross-contamination

• Shortens operating time and simplifies graft collection• Lateral opening system provides device stability

Manufactured By META® Advanced Medical Technology

RegenerOss® Allograft PuttyDemineralized Bone Matrix (DBM) in a lecithin carrier• Contains 40% (by weight) DBM for optimal handling• Osteoinductivity of every lot is validated by cell proliferation assay

• Moldable and resistant to irrigation for ease of use• Provides graft containment for ease of delivery

Manufactured By BIOMET Interpore Cross

Calcigen™ OralThe strength you need for the stability you want.• Medical-grade calcium sulfate (CaSO4) in powder form• Can be used as a barrier by itself or as a binder andstabilizer when mixed with graft materials

• Completely resorbable with no known side effects• Packaged with a setting agent specifically for dental applications

• Easy to mix and apply

Biogran®Bioactive glass for effective regeneration in most oral applications.• Granules are the optimal size range, large enough not to packtoo densely, small enough to fully resorb

• Provides a unique protective environment needed for osteogenesis• Completely resorbable through the Krebs cycle• 100% synthetic• Forms a cohesive mass when mixed with blood or sterile saline, minimizing the potential for dry socket

• Pre-formed dappen dish or pre-formed dappen dish withempty syringe

Product Overview

Allografts

53




RegenerOss® AllograftDemineralized Freeze Dried Bone Allograft (DFDBA)& Freeze Dried Bone Allograft (FDBA)

Cancellous, Partially Demineralized 0.5cc 200-300µm RDCA205

Cancellous, Partially Demineralized 1cc 200-300µm RDCA210





Cortical, Partially Demineralized 0.5cc 200-300µm RDCO205

Cortical, Partially Demineralized 1cc 200-300µm RDCO210





Cancellous, Mineralized 0.5cc 200-300µm RMCA205

Cancellous, Mineralized 1cc 200-300µm RMCA210





Cortical, Mineralized 0.5cc 200-300µm RMCO205

Cortical, Mineralized 1cc 200-300µm RMCO210














Manufactured By:

Allografts (Cont’d)

54



*Special order, allow 4–6 weeks.





Cancellous, Partially Demineralized, Irradiated 0.5cc 300-500µm RDCA305r

Cancellous, Partially Demineralized, Irradiated 1cc 300-500µm RDCA310r

Cortical, Partially Demineralized, Irradiated 0.5cc 200-300µm RDCO205r

Cortical, Partially Demineralized, Irradiated 0.5cc 300-500µm RDCO305r

Cortical, Partially Demineralized, Irradiated 1cc 300-500µm RDCO310r

Cancellous, Mineralized, Irradiated 0.5cc 200-300µm RMCA205r

Cancellous, Mineralized, Irradiated 0.5cc 300-500µm RMCA305r

Cortical, Mineralized, Irradiated 0.5cc 300-500µm RMCO305r

Cancellous, Partially Demineralized, Irradiated 2cc 300-500µm RDCA320r

Cortical, Partially Demineralized, Irradiated 2cc 300-500µm RDCO320r

Cancellous, Mineralized, Irradiated 1cc 300-500µm RMCA310r

Cortical, Mineralized, Irradiated 1cc 300-500µm RMCO310r

Dura Mater Patch (Membrane) 4x5cm 0655*

Fascia Lata Patch (Membrane) 4x5cm 0716*

Right Hemi Mandible 0630*

Left Hemi Mandible 0631*

Full Mandible 0632*

Iliac Crest Strip Small 0055*

Iliac Crest Strip Medium 0473*

lliac Crest Strip Large 0056*

Mineralized Cancellous Powder 10cc 100-200µm 1454*

Demineralized Cancellous Powder 10cc 100-200µm 1462*

Demineralized Cortical Powder 10cc 100-200µm 1465*

Dental M&M Block Small 1507*

Dental M&M Block, Irradiated Small 1523*

Dental M&M Block Medium 1491*

Dental M&M Block, Irradiated Medium 1522*

Dental M&M Block Large 1508*

Dental M&M Block, Irradiated Large 1565*

RegenerOss® Allograft PuttyDemineralized Bone Matrix In A Lecithin CarrierManufactured By BIOMET Interpore Cross

0.5cc Syringe ROAP05

1cc Syringe ROAP10

2cc Syringe ROAP20

55


AutogenousSafescraper® TWISTDisposable Cortical Bone Collector (3-pack) Curved 3987

Straight 3598

R. Quétin Bone-MillStainless Steel Bone Grinder QBM001

AlloplastsBiogran®100% Synthetic Resorbable Bone Graft Material

Mixing Cup (750mg) & Syringe 1-Pack 2100-0750

Mixing Cups (500mg) 7-Pack 2100-0003



Calcigen™Oral Bone Graft System100% Synthetic Resorbable 1.5gm Calcium Sulfate CAL150Bone Graft Binder/Stabilizer 0.8gm Setting Solution

GBR BarrierOsseoGuard® MembraneManufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Resorbable Collagen Membrane 15mm x 20mm OG1520



OsseoGuard Flex® MembraneManufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Resorbable Collagen Membrane 15mm x 20mm OGF1520



Manufactured By META® Advanced Medical Technology

Not available in all regions.

Endobon® Xenograft GranulesA RegenerOss® Product (Bovine-derived Hydroxyapatite particulate)Manufactured By Biomet France Sarl

500 – 1000µm 0.5ml ROX05

500 – 1000µm 1ml ROX10

500 – 1000µm 2ml ROX20

1000 – 2000µm 2ml ROXLG20

1000 – 2000µm 5ml ROXLG50

1000 – 2000µm 8ml ROXLG80


Xenografts




Patient Education Products


Patient Ed Kit Model Label (4-unit) - DIEM®2 DIEM2-4UNIT

Patient Ed Kit Model Label (6-unit) - DIEM 2 DIEM2-6UNIT

Patient Ed Demonstration Kit - OSSEOTITE® Implant EXHEXMOD

Patient Ed Model - LOCATOR® PEMODLOC

Patient Ed Model - Single/Multiple Teeth PEMODSM

Patient Ed Folio with DVD (electronic version only) ART884

Patient Ed Brochure - Bone Loss (25pk) ART885

Patient Ed Brochure - Multiple Teeth (25pk) ART887

Patient Ed Brochure - Implant Retained, Fixed (25pk) ART888

Patient Ed Brochure - Implant Retained, LOCATOR (25pk) ART889

Patient Ed Brochure - Implant Retained, Bar (25pk) ART890

Patient Ed Brochure - Immediate Teeth Replacement, DIEM (25pk) ART929

Patient Care Card (25pk) ART930

Patient Ed Flip Chart ART943

Patient Ed DVD - Multilingual Version ART951EUR

Patient Ed Brochure - Spanish Version (Bone Loss) ART957S

Patient Ed Awareness and Education Poster ART962

Patient Ed Quad-fold Brochure with holder (25pk) ART1154

General Patient Education Brochure (25pk) ART1157

Regenerative Patient Ed Brochure ART1178

56

0055* ILIAC CREST STRIP, SMALL 54

0056* ILIAC CREST STRIP, LARGE 54

0473* ILIAC CREST STRIP, MEDIUM 54

0630* RIGHT HEMI MANDIBLE 54

0631* LEFT HEMI MANDIBLE 54

0632* FULL MANDIBLE 54

0655* DURA MATER-PATCH (MEMBRANE), 4X5CM 54

0716* FASCIA LATA PATCH (MEMBRANE), 4X5CM 54

1454* MINERALIZED CANCELLOUS POWDER, 10CC, 100-200µm 54

1462* DEMINERALIZED CANCELLOUS POWDER, 10CC, 100-200µm 54

1465* DEMINERALIZED CORTICAL POWDER, 10CC, 100-200µm 54

1491* DENTAL M&M BLOCK, MEDIUM 54

1507* DENTAL M&M BLOCK, SMALL 54

1508* DENTAL M&M BLOCK, LARGE 54

1522* DENTAL M&M BLOCK, IRRADIATED, MEDIUM 54

1523* DENTAL M&M BLOCK, IRRADIATED, SMALL 54

1565* DENTAL M&M BLOCK, IRRADIATED, LARGE 54

3598 SAFESCRAPER® TWIST, STRAIGHT (3PK) 55

3987 SAFESCRAPER TWIST, CURVED (3PK) 55

2100-0003 BIOGRAN® 500MG MIXING CUP (7PK) 55

2100-0004 BIOGRAN 750MG MIXING CUP (7PK) 55

2100-0005 BIOGRAN 1500MG MIXING CUP (7PK) 55

2100-0750 BIOGRAN 750MG MIXING CUP & SYRINGE (1PK) 55

31-3100 BIOMET 2MM FIXATION SYSTEM 31

ACT2010 ACT® REUSABLE TWIST DRILL, 2MM X 10MM 34,35,37,39

ACT2015 ACT REUSABLE TWIST DRILL, 2MM X 15MM 34,35,37,39

ACT2020 ACT REUSABLE TWIST DRILL, 2MM X 20MM 34,35,37,39

ACT2710 ACT REUSABLE TWIST DRILL, 2.75MM X 10MM 35,37,39



ACT3010 ACT REUSABLE TWIST DRILL, 3MM X 10MM 35,37,39



ACT3110 ACT REUSABLE TWIST DRILL, 3.15MM X 10MM 39






ACT3810 ACT REUSABLE TWIST DRILL, 3.85MM X 10MM 35,39





ACT4285 ACT REUSABLE TWIST DRILL, 4.25MM X 8.5MM 35,37,39



ACT4885 ACT REUSABLE TWIST DRILL, 4.85MM X 8.5MM 35,39



ACT5285 ACT REUSABLE TWIST DRILL, 5.25MM X 8.5MM 35,37,39

ACTDE ACT DRILL EXTENSION 34,35,37,47

ACTPSD ACT POINTED STARTER DRILL 34,40

ART884 PATIENT ED FOLIO WITH DVD (ELECTRONIC VERSION ONLY) 56

ART885 PATIENT ED BROCHURE - BONE LOSS (25PK) 56

ART887 PATIENT ED BROCHURE - MULTIPLE TEETH (25PK) 56

ART888 PATIENT ED BROCHURE - IMPLANT RETAINED, FIXED (25PK) 56

ART889 PATIENT ED BROCHURE - IMPLANT RETAINED, LOCATOR® (25PK) 56

ART890 PATIENT ED BROCHURE - IMPLANT RETAINED, BAR (25PK) 56

ART929 PATIENT ED BROCHURE - IMMEDIATE TEETH REPLACEMENT, 56DIEM® (25PK)

ART930 PATIENT CARE CARD (25PK) 56

ART943 PATIENT ED FLIP CHART 56

ART951EUR PATIENT ED DVD - MULTILINGUAL VERSION 56

ART957S PATIENT ED BROCHURE - SPANISH VERSION (BONE LOSS) 56

ART962 PATIENT ED AWARENESS AND EDUCATION POSTER 56

ART1025 TRANSPARENCY FOR CERTAIN® PREVAIL® EXPANDED PLATFORM, 45OSSEOTITE XP® CERTAIN AND OSSEOTITE XP EXTERNALCONNECTION IMPLANTS

ART1027 TRANSPARENCY FOR EXTERNAL CONNECTION PARALLEL 45WALLED IMPLANTS

ART1036 TRANSPARENCY FOR CERTAIN AND EXTERNAL CONNECTION 45TAPERED IMPLANTS

ART1037 TRANSPARENCY FOR PARALLEL WALLED AND STRAIGHT COLLAR 45CERTAIN PREVAIL IMPLANTS

ART1154 PATIENT ED QUAD-FOLD BROCHURE WITH HOLDER 56

ART1157 GENERAL PATIENT ED BROCHURE (25PK) 56

ART1178 REGENERATIVE PATIENT ED BROCHURE 56

BB001 AUTOCLAVABLE ORGANIZER BOX 41

BP340 BONE PROFILER W/GUIDE PIN, 3.4MM(D) X 3.8MM(P) 41

BP450 BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 5MM(P) 41

BP460 BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 6MM(P) 41

BP475 BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 7.5MM(P) 41

BP550 BONE PROFILER W/GUIDE PIN, 5MM(D) X 5MM(P) 41


BP575 BONE PROFILER W/GUIDE PIN, 5MM(D) X 7.5MM(P) 41


BP675 BONE PROFILER W/GUIDE PIN, 6MM(D) X 7.5MM(P) 41

BPAKT WIDE DIAMETER BONE PROFILER KIT, 5MM & 6MM(D) 41

BPAKTB ORGANIZER BOX FOR WIDE DIAMETER BONE PROFILERS 41

BPGUIDE GUIDE FOR BONE PROFILER, 3.4, 4.1, 5, 6MM(D) 41

BPKIT STANDARD DIAMETER BONE PROFILER KIT, 4.1MM(D) 41

BPKITB ORGANIZER BOX FOR STANDARD DIAMETER BONE PROFILER KIT 41

C9980 LOW TORQUE INDICATING RATCHET WRENCH (STANDARD) 46ISO 1797 ADAPTER

C9981 LOW TORQUE INDICATING RATCHET WRENCH (SHORT) 46ISO 1797 ADAPTER

C202-750 OSSEOCISION® TUBE CLAMP 22

C293-025 OSSEOCISION INTERNAL IRRIGATION TUBE 22

C823-752 OSSEOCISION Y-CONNECTOR 22

CAL150 CALCIGEN™ ORAL - BONE GRAFT STABILIZER 55

CD100 COUNTERSINK REUSABLE DRILL, 4.1MM EXTERNAL CONNECTION 36,37,40

CD4500 COUNTERSINK REUSABLE DRILL, 4/5, 4/5/4MM 35,37,40

CD500 COUNTERSINK/PILOT REUSABLE DRILL, 5MM 35,37,40

CD5600 COUNTERSINK/PILOT REUSABLE DRILL, 5/6, 5/4/5MM 35,37,40

CD600 COUNTERSINK/PILOT REUSABLE DRILL, 4.25–5.25MM 36,37,40

CDI4500 COUNTERSINK DEPTH INDICATOR FOR CD4500 35,44

Index

Item# Description Page# Item# Description Page#

*Special order, allow 4–6 weeks.

CDI5600 COUNTERSINK DEPTH INDICATOR FOR CD5600 36,44

CS275 HEADLESS COVER SCREW, 4.1, 5, 6MM(D) 7,8,9,10

CS375 IMPLANT COVER SCREW, 4.1MM(D) X 1MM(H) 7,8,9,10

CS500 IMPLANT COVER SCREW, 5MM(D) X 1MM(H) 7,8,9,10

CS600 IMPLANT COVER SCREW, 6MM(D) X 1MM(H) 7,8,9,10

CW100 OPEN END WRENCH 26,30,33,36,38,46

DC100 COUNTERSINK DISPOSABLE DRILL, 4.1MM EXT. CONNECTION 23,24,40

DC500 PILOT/COUNTERSINK DISPOSABLE DRILL, 5MM 40

DC600 PILOT/COUNTERSINK DISPOSABLE DRILL, 6MM 40

DDK210 DISPOSABLE DRILL KIT W/DT210 23


DDK220 DISPOSABLE DRILL KIT W/DT220 23,24,39










DDKN215 DISPOSABLE DRILL KIT W/DTN215 23

DDKN2315 DISPOSABLE DRILL KIT W/DTN2315 23,39

DDKN315 DISPOSABLE DRILL KIT W/DTN315 24

DIEM2-4UNIT DIEM® 2 PATIENT ED KIT MODEL LABEL (4-UNIT) 56

DIEM2-6UNIT DIEM 2 PATIENT ED KIT MODEL LABEL (6-UNIT) 56

DI100 DIRECTION INDICATOR, 2MM(D) X 10MM(L), 3EA. 34,36,38,44

DI200 DIRECTION INDICATOR, 2MM(D) X 15MM(L) 44

DI2310 DIRECTION INDICATOR, 2.3MM(D) X 10MM(L) 44

DI2315 DIRECTION INDICATOR, 2.3MM(D) X 15MM(L) 44

DP020 IMPLANT DEPTH GAUGE, 20MM(L) 33,36,38

DP100 PILOT DISPOSABLE DRILL, 2-3MM 23,24,40

DR100 DISPOSABLE ROUND BUR 23,24,40

DS100J OSSEOCISION® SURGICAL DRILL SYSTEM (100V) W/HANDPIECE 22

DS100RW OSSEOCISION SURGICAL DRILL SYSTEM (230V) W/HANDPIECE 22

DS100US OSSEOCISION SURGICAL DRILL SYSTEM (120V) W/HANDPIECE 22

DS2310 DRILL STOP, 2.3MM-3.25MM X 10MM 41





DS458 DRILL STOP, 4.25MM-5.25MM X 8.5MM 41

DT2010 DISPOSABLE TWIST DRILL, 2MM(D) X 10MM(L) 39



DT210 DISPOSABLE TWIST DRILL, 2.3MM(D) X 10MM(L) 23,24,39



DT2710 DISPOSABLE TWIST DRILL, 2.75MM(D) X 10MM(L) 23,39



DT310 DISPOSABLE TWIST DRILL, 3MM(D) X 10MM(L) 24,39

DT3110 DISPOSABLE TWIST DRILL, 3.15MM(D) X 10MM(L) 39










DT428 DISPOSABLE TWIST DRILL, 4.25MM(D) X 8.5MM(L) 39



DT528 DISPOSABLE TWIST DRILL, 5.25MM(D) X 8.5MM(L) 39

DTN210 DISPOSABLE TWIST DRILL, NON-HUBBED, 2MM(D) X 10MM(L) 39

DTN215 DISPOSABLE TWIST DRILL, NON HUBBED, 2MM(D) X 15MM(L) 23,24,39


DTN2310 DISPOSABLE TWIST DRILL, NON-HUBBED, 2.3MM(D) X 10MM(L) 39

DTN2315 DISPOSABLE TWIST DRILL, NON-HUBBED, 2.3MM(D) X 15MM(L) 23,39









DTN315 DISPOSABLE TWIST DRILL, NON-HUBBED, 3MM(D) X 15MM(L) 24,39







DTN428 DISPOSABLE TWIST DRILL, NON-HUBBED, 4.25MM(D) X 8.5MM(L) 39



DTN528 DISPOSABLE TWIST DRILL, NON-HUBBED, 5.25MM(D) X 8.5MM(L) 39

DU1000US DU1000 SURGICAL DRILLING UNIT, 115 VOLT (USA) 21

DU1000EU DU1000 SURGICAL DRILLING UNIT, 230 VOLT (EUROPE) 21

DU1KFC DU1000 FOOT CONTROL 21

DU1KH1 DU1000 HANDLE FOR FOOT CONTROL 21

DU1KHS DU1000 MOTOR/HANDPIECE SUPPORT 21

DU1KIT DU1000 DISPOSABLE IRRIGATION TUBING SET (6-PIECE) 21

DU1KMC DU1000 MICROMOTOR WITH CABLE 21

DU1KPCCH DU1000 ELECTRICAL POWER CORD (SWITZERLAND) 21

DU1KPCDK DU1000 ELECTRICAL POWER CORD (DENMARK) 21

DU9BG DU1000 BUR TESTING GAUGE 21

DU9CL DU1000 IRRIGATION TUBE CLAMPS (5-PACK) 21

DU9F DU1000 CIRCUIT FUSE 21

DU9IBS DU1000 IRRIGATION BAG STAND 21

DU9LP DU1000 LOCKING PIN 21

DU9NC DU1000 NOZZLE CLEANER 21

DU9PCAU DU1000 ELECTRICAL POWER CORD (AUSTRALIA, NEW ZEALAND) 21

Index


Index


DU9PCEU DU1000 ELECTRICAL POWER CORD (EUROPE) 21

DU9PCUK DU1000 ELECTRICAL POWER CORD (UNITED KINGDOM, IRELAND) 21

DU9SC DU1000 SPRAY CAP WITH NOZZLE 21

DU9SP DU1000 MOTOR PROTECTIVE COVER 21

DU9WI75L DU1000 20:1 HANDPIECE 21

DU9WS75 DU1000 20:1 HANDPIECE 21

DU9YC DU1000 Y-CONNECTOR (3-PACK) 21

DU9PCUS DU1000 ELECTRICAL POWER CORD (USA, CANADA, JAPAN) 21

E211-001 OSSEOCISION® MICROMOTOR W/CORD 22

E211-051 OSSEOCISION MOTOR CORD 22

E211-701 OSSEOCISION AUTOCLAVE PLUG FOR MOTOR 22

EHA343 BELLATEK® ENCODE® 2-PC HEALING ABUTMENT, 153.4MM(D) X 3.8MM(P) X 3MM(H)

EHA344 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 153.4MM(D) X 3.8MM(P) X 4MM(H)



EHA353 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 153.4MM(P) X 5MM(P) X 3MM(H)








EHA453 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 154.1MM(D) X 5MM(P) X 3MM(H)




EHA463 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 6MM(P) X 3MM(H)








EHA553 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 165MM(D) X 5MM(P) X 3MM(H)








EHA573 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 165MM(D) X 7.5MM(P) X 3MM(H)












EXHEXMOD PATIENT ED DEMONSTRATION KIT - OSSEOTITE® IMPLANT 56

FNT3210 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 7

FNT3211 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 7



FNT3285 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

FNT410 FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L) 7

FNT411 FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 7







Index


FNT515 FULL OSSEOTITE® TAPERED IMPLANT, 5MM(D) X 15MM(L) 7







FOS307 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 7MM(L) 9


FOS311 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 9



FOS3207 FULL OSSEOTITE XP® MINIPLANT®, 3.25MM(D) X 4.1MM(P) X 7MM(L) 9

FOS3210 FULL OSSEOTITE XP MINIPLANT, 3.25MM(D) X 4.1MM(P) X 10MM(L) 9

FOS3211 FULL OSSEOTITE XP MINIPLANT, 3.25MM(D) X 4.1MM(P) X 11.5MM(L) 9



FOS3285 FULL OSSEOTITE XP MINIPLANT, 3.25MM(D) X 4.1MM(P) X 8.5MM(L) 9

FOS385 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 9

FOS407 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 7MM(L) 9


FOS411 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 9
















FOSM307 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 7MM(L) 9


FOSM311 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 9



FOSM385 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 9

H-TIRW HIGH TORQUE INDICATING RATCHET WRENCH 46

IBPGP CERTAIN® GUIDE FOR BONE PROFILER (3PK), 4.1, 5, 6MM(D) 41

IBPMGP CERTAIN 3.4MM(D) BONE PROFILING GUIDE PIN (3PK) 41

IC015 IMPLANT CARRIER, 15MM 44

IC100 SURGICAL INDEX COPING 47

ICD100 CERTAIN COUNTERSINK REUSABLE DRILL - PREVAIL® 3/4/3MM(P) 33,36,37,40

ICDI100 COUNTERSINK DEPTH INDICATOR FOR ICD100 36

ICS275 CERTAIN IMPLANT HEADLESS COVER SCREW, 4.1, 5, 6MM(D) 1,2,3,4,5,6

ICS375 CERTAIN IMPLANT COVER SCREW, 4.1MM(D) X 1MM(H) 1,2,3,4,5,6

ICS500 CERTAIN IMPLANT COVER SCREW, 5MM(D) X 1MM(H) 1,2,3,4,5,6

ICS600 CERTAIN IMPLANT COVER SCREW, 6MM(D) X 1MM(H) 3,4,5,6

ICSF41 CERTAIN FLAT IMPLANT COVER SCREW, 4.1MM(D) 3,4,5,6

ICSF50 CERTAIN FLAT IMPLANT COVER SCREW, 5MM(D) 3,4,5,6

ICSF60 CERTAIN FLAT IMPLANT COVER SCREW, 6MM(D) 3,4,5,6

IDI001 CERTAIN DIRECTION INDICATOR, 10MM(L) 44

IDIKT CERTAIN DIRECTION INDICATOR KIT 44

IDIM01 CERTAIN DIRECTION INDICATOR, 3.25MM(D) X 10MM(L) 40

IEHA343 CERTAIN BELLATEK® ENCODE® 2-PC HEALING ABUTMENT, 11 3.4MM(D) X 3.8MM(P) X 3MM(H)

IEHA344 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 113.4MM(D) X 3.8MM(P) X 4MM(H)



IEHA353 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 11 3.4MM(D) X 5MM(P) X 3MM(H)

IEHA354 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 113.4MM(D) X 5MM(P) X 4MM(H)




IEHA444 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 11 4.1MM(D) X 4.1MM(P) X4MM(H)



IEHA453 BELLATEK CERTAIN ENCODE 2-PC HEALING ABUTMENT, 114.1MM(D) X 5MM(P) X 3MM(H)








IEHA473 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 11 4.1MM(D) X 7.5MM(P) X 3MM(H)




IEHA553 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 125MM(D) X 5MM(P) X 3MM(H)

Index


IEHA554 CERTAIN® BELLATEK® ENCODE® 2-PC HEALING ABUTMENT, 125MM(D) X 5MM(P) X 4MM(H)







IEHA573 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 125MM(D) X 7.5MM(P) X 3MM(H)












IFNT3210 FULL OSSEOTITE® TAPERED CERTAIN IMPLANT, 3.25MM(D) X 10MM(L) 4

IFNT3211 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 11.5MM(L) 4

IFNT3213 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 13MM(L) 4

IFNT3215 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 15MM(L) 4

IFNT3285 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 8.5MM(L) 4

IFNT410 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 10MM(L) 4

IFNT411 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 11.5MM(L) 4












IFNT615 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 46MM(D) X 15MM(L)

IFNT685 FULL OSSEOTITE TAPERED CERTAIN IMPLANT, 46MM(D) X 8.5MM(L)

IFOS410 FULL OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 64MM(D) X 10MM(L)

IFOS411 FULL OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 64MM(D) X 11.5MM(L)













IFOSM310 FULL OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 63.25MM(D) X 10MM(L)

IFOSM311 FULL OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 63.25MM(D) X 11.5MM(L)



IFOSM385 FULL OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 63.25MM(D) X 8.5MM(L)

IIOS4310 OSSEOTITE CERTAIN PREVAIL® IMPLANT, 24MM(D) X 3.4MM(C) X 10MM(L)

IIOS4311 OSSEOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(C) X 11.5MM(L)

IIOS4313 OSSEOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(P) X 13MM(L)

IIOS4315 OSSEOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(C) X 15MM(L)

IIOS4385 OSSEOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(C) X 8.5MM(L)


IIOS5411 OSSEOTITE CERTAIN PREVAIL IMPLANT, 25MM(D) X 4.1MM(P) X 11.5MM(L)


Index


IIOS5415 OSSEOTITE® CERTAIN® PREVAIL® IMPLANT, 25MM(D) X 4.1MM(P) X 15MM(L)

IIOS5485 OSSEOTITE CERTAIN PREVAIL IMPLANT, 25MM(D) X 4.1MM(P) X 8.5MM(L)

IIPDTL CERTAIN IMPLANT PLACEMENT DRIVER (LONG), 4.1, 5, 6MM(D) 34,36,38,48

IIPDTS CERTAIN IMPLANT PLACEMENT DRIVER (SHORT), 4.1, 5, 6MM(D) 34,36,38,48

ILPCMBP3 CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 3.4MM(D) 41

ILPCMBP4 CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 4.1MM(D) 41

ILPCMBP5 CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 5MM(D) 41

IMBP4 CERTAIN MANUAL BONE PROFILER, 4.1MM(D) X 5MM(P) 26,30,41

IMBP5 CERTAIN MANUAL BONE PROFILER, 5MM(D) X 6MM(P) 26,30,41

IMCSF34 CERTAIN FLAT IMPLANT COVER SCREW, 3.4MM(D) 1,2,3,4,5,6

IMHA32 CERTAIN EP® 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 2MM(H) 11

IMHA33 CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 3MM(H) 11



IMMBP CERTAIN MANUAL BONE PROFILER, 3.4MM(D) X 4.1MM(P) 30,41

IMMBP35 CERTAIN MANUAL BONE PROFILER, 3.4MM(D) X 5MM(P) 41

IMMCS1 CERTAIN COVER SCREW, 3.4MM(D) X 1MM(H) 1,2,3,4,5,6

IMPDTL CERTAIN IMPLANT PLACEMENT DRIVER TIP, 3.4MM(D) LONG 34,36,37,48

IMPDTS CERTAIN IMPLANT PLACEMENT DRIVER TIP, 3.4MM(D) SHORT 34,36,37,48

INT3210 OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 10MM(L) 4

INT3211 OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 11.5MM(L) 4



INT3285 OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 8.5MM(L) 4

INT410 OSSEOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 10MM(L) 4

INT411 OSSEOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 11.5MM(L) 4














IOSM310 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 63.25MM(D) X 10MM(L)

IOSM311 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 63.25MM(D) X 11.5MM(L)




IOSM385 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 63.25MM(D) X 8.5MM(L)

IOSS410 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 64MM(D) X 10MM(L)

IOSS411 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 64MM(D) X 11.5MM(L)













IOSS613 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 13MM(L) 6

IOSS615 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 15MM(L) 6

IOSS685 OSSEOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 8.5MM(L) 6

IRE100U CERTAIN UNIVERSAL RATCHET EXTENSION, 6MM(L) SHORT 34,36,38,48

IRE200U CERTAIN UNIVERSAL RATCHET EXTENSION, 15MM(L) LONG 34,36,38,48

IRORDR CERTAIN DRIVER REPLACEMENT O-RINGS, QTY:10 34,36,38,48

ISHA42 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 2MM(H) 11





ISMHA32 CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 2MM(H) 13




ISWHA52 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H) 14










ITD210 IRRIGATED TWIST DRILL, 2.3MM X 10MM 39





Index



ITD310 IRRIGATED TWIST DRILL, 3MM X 10MM 39




ITD315 IRRIGATED TWIST DRILL 3MM X 15MM 39

ITD320 IRRIGATED TWIST DRILL, 3MM X 20MM 39






ITD428 IRRIGATED TWIST DRILL, 4.25MM X 8.5MM 39



ITD528 IRRIGATED TWIST DRILL, 5.25MM X 8.5MM 39

ITHA52 CERTAIN® EP® 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 2MM(H) 13

ITHA53 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 3MM(H) 13








ITHA73 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 7.5MM(P) X 3MM(H) 13




IWTH52 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H) 14









IWTH572 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 7.5MM(P) X 2MM(H) 14
















LPCBP3 LOW PROFILE ABUTMENT BONE PROFILER, 3.4MM(D) 41

LPCBP4 LOW PROFILE ABUTMENT BONE PROFILER, 4.1MM(D) 41

LPCBP5 LOW PROFILE ABUTMENT BONE PROFILER, 5MM(D) 41

L-TIRW LOW TORQUE INDICATING RATCHET WRENCH 46

L-TIRWK LOW TORQUE INDICATING RATCHET WRENCH KIT 46

MALL1 MALLET, STAINLESS STEEL 42

MDR10 HANDPIECE CONNECTOR 26,30,34,36,38,47

ME100 SMALL MEMBRANE ELEVATOR 50

ME200 MEDIUM MEMBRANE ELEVATOR 50

ME300 LARGE MEMBRANE ELEVATOR 50

MHA32 EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 2MM(H) 17




MIDTH MANUAL INTERCHANGEABLE DRIVER TIP HANDLE 43

MMC03 IMPLANT MOUNT, 3.4MM(D) X 3MM(L) 40

MMC15 IMPLANT MOUNT, 3.4MM(D) X 15MM(L) 34,36,38,44

MMCS1 IMPLANT COVER SCREW, 3.4MM(D) X 1MM(H) 7,8,9,10

MMKIT IMPLANT MOUNT KIT, 3.4MM(D) 44

MSGIAM1 NAVIGATOR® CERTAIN ANALOG MOUNT, 3.4MM(D) X 1(L) 31

MSGIAM2 NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 2(L) 31



MSGIAML NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) - LONG 28

MSGIAMS NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) - SHORT 28

MSGIIML NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) - LONG 26

MSGIIMS NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) - SHORT 26

MSGIIM1 NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 1(L) 30




MSGSD NAVIGATOR STARTER DRILL, 3.4MM(D) 29

MSGTAP NAVIGATOR BONE TAP, 3.25MM(D) 30

MSGTCDL TAPERED NAVIGATOR COUNTERSINK DRILL, 3.4MM(D) - LONG 25

MSGTCDS TAPERED NAVIGATOR COUNTERSINK DRILL, 3.4MM(D) - SHORT 25

MSGTD10L TAPERED NAVIGATOR SHAPING DRILL, 263.25MM(D) X 10MM(L) - LONG

MSGTD10S TAPERED NAVIGATOR SHAPING DRILL, 253.25MM(D) X 10MM(L) - SHORT

MSGTD11L TAPERED NAVIGATOR SHAPING DRILL, 263.25MM(D) X 11.5MM(L) - LONG

MSGTD11S TAPERED NAVIGATOR SHAPING DRILL, 253.25MM(D) X 11.5MM(L) - SHORT





MSGTD85L TAPERED NAVIGATOR SHAPING DRILL, 263.25MM(D) X 8.5MM(L) - LONG

Index


MSGTD85S TAPERED NAVIGATOR® SHAPING DRILL, 253.25MM(D) X 8.5MM(L) - SHORT

MSGTT10L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 10(L) - LONG 27

MSGTT10S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 10(L) - SHORT 27

MSGTT11L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 11.5(L) - LONG 27

MSGTT11S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 11.5(L) - SHORT 27





MSGTT85L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 8.5(L) - LONG 27

MSGTT85S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 8.5(L) - SHORT 27

MTAP1 IMPLANT TAP, 3.25MM(D) X 18MM(L) 42

MTAP2 IMPLANT DENSE BONE TAP, 3.25MM(D) X 18MM(L) 36,37,42

NIIOS4310 NANOTITE™ CERTAIN® PREVAIL® IMPLANT, 24MM(D) X 3.4MM(C) X 10MM(L)

NIIOS4311 NANOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(C) X 11.5MM(L)

NIIOS4313 NANOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(C) X 13MM(L)

NIIOS4315 NANOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(C) X 15MM(L)

NIIOS4385 NANOTITE CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(C) X 8.5MM(L)

NIIOS5485 NANOTITE CERTAIN PREVAIL IMPLANT, 25MM(D) X 4.1MM(P) X 8.5MM(L)

NIIOS5410 NANOTITE CERTAIN PREVAIL IMPLANT, 25MM(D) X 4.1MM(P) X 10MM(L)




NIITP4310 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 14MM(D) X 3MM(P) X 10MM(L)

NIITP4311 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 14MM(D) X 3MM(P) X 11.5MM(L)














NINT3210 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 10MM(L) 3

NINT3211 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 11.5MM(L) 3



NINT3285 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 8.5MM(L) 3

NINT410 NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 10MM(L) 3

NINT411 NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 11.5MM(L) 3














NIOSM310 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 53.25MM(D) X 10MM(L)

NIOSM311 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 53.25MM(D) X 11.5MM(L)




NIOSM385 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 53.25MM(D) X 8.5MM(L)

NIOSS410 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 54MM(D) X 10MM(L)

NIOSS411 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 54MM(D) X 11.5MM(L)







Index


NIOSS513 NANOTITE™ PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 13MM(L) 5

NIOSS515 NANOTITE PARALLEL WALLED CERTAIN® IMPLANT, 5MM(D) X 15MM(L) 5

NIOSS585 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 8.5MM(L) 5

NIOSS610 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 10MM(L) 5

NIOSS611 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 11.5MM(L) 5



NNT3210 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 7

NNT3211 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 7



NNT3285 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

NNT410 NANOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L) 7

NNT411 NANOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 7














NOSM310 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 8

NOSM311 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 8




NOSM385 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 8

NOSS407 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 7MM(L) 8


NOSS411 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 8



















NT3210 OSSEOTITE® TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 8

NT3211 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 8

NT3213 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 13MM(L) 8

NT3215 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 15MM(L) 8

NT3285 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 8

NT410 OSSEOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L) 8

NT411 OSSEOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 8














NTAP3210 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 10MM(L) 32,42

NTAP3211 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 11.5MM(L) 32,42



NTAP3285 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 8.5MM(L) 32,42

NTAP410 DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 10MM(L) 32,42

NTAP411 DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 11.5MM(L) 32,42














NTAPK DENSE BONE TAP KIT 42

NTAPKT DENSE BONE TAP KIT TRAY FOR TAPERED IMPLANTS 33

NTDI3210 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 10MM 33,43

NTDI3211 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 11.5MM 33,43



NTDI3285 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 8.5MM 33,43

NTDI410 OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 10MM 33,43

NTDI411 OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 11.5MM 33,43




Index


NTDI510 OSSEOTITE® TAPERED DEPTH INDICATOR, 5MM X 10MM 33,43










NTDIK OSSEOTITE TAPERED DIRECTION/DEPTH INDICATOR KIT 43

NTOST0 OSSEOTITE TAPERED OSTEOTOME SYSTEM KIT, STRAIGHT 49

NTOST0A OSSEOTITE TAPERED OSTEOTOME SYSTEM KIT, ANGLED 49

NTOST3 OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 3.25MM 49

NTOST3A OSSEOTITE TAPERED ANGLED OSTEOTOME, 3.25MM 49

NTOST4 OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 4MM 49

NTOST4A OSSEOTITE TAPERED ANGLED OSTEOTOME, 4MM 49





NTOSTTRA OSSEOTITE TAPERED OSTEOTOME TRAY, ANGLED 49

NTOSTTRS OSSEOTITE TAPERED OSTEOTOME TRAY, STRAIGHT 49

OG1520 OSSEOGUARD® RESORBABLE COLLAGEN MEMBRANE, 15MM X 20MM 55

OG2030 OSSEOGUARD RESORBABLE COLLAGEN MEMBRANE, 20MM X 30MM 55

OG3040 OSSEOGUARD RESORBABLE COLLAGEN MEMBRANE, 30MM X 40MM 55

OGF1520 OSSEOGUARD FLEX® RESORBABLE COLLAGEN MEMBRANE, 15MM X 20MM 55

OGF2030 OSSEOGUARD FLEX RESORBABLE COLLAGEN MEMBRANE, 20MM X 30MM 55

OGF3040 OSSEOGUARD FLEX RESORBABLE COLLAGEN MEMBRANE, 30MM X 40MM 55

OSM310 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 10

OSM311 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 10




OSM385 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 10

OSS310 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L) 10

OSS311 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 10





OSS385 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 10

OSS410 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L) 10

OSS411 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 10




















OST00 SUMMERS OSTEOTOME KIT #1-4 49

OST01 SUMMERS OSTEOTOME #1 49





OST10 SUMMERS OSTEOTOME KIT #1-5 49

OST20 SUMMERS OSTEOTOME KIT #1-5 AND FUTURE SITE 49

OSTFS SUMMERS OSTEOTOME FOR FUTURE SITE 49

OSTTR SUMMERS OSTEOTOME SYSTEM TRAY 49

PD100 PILOT REUSABLE DRILL, 2-3MM 36,37,40

PEMODLOC PATIENT ED MODEL - LOCATOR® 56

PEMODSM PATIENT ED MODEL - SINGLE/MULTIPLE TEETH 56

PHD00N NARROW POSTERIOR SMALL HEX DRIVER, 17MM 34,36,38

PHD02N NARROW POSTERIOR LARGE HEX DRIVER, 17MM 26,30,34,36,38

PSKT01 STARTER KIT 35,36

PSKT10 BASIC SURGICAL KIT - PLASTIC 37,38

PSKT20 STANDARD UNISYSTEM SURGICAL KIT - PLASTIC 37,38

PSKT30 PREMIUM UNISYSTEM SURGICAL KIT 37,38

PSKT30U CERTAIN® UPGRADE SURGICAL KIT FOR PSKT20/PSKT30 37,38

PSKT35 CERTAIN PREMIUM SURGICAL KIT 35,36

PSKT40 CERTAIN PREMIUM SURGICAL KIT FOR PARALLEL WALLED IMPLANT 35,36

PTT100 PLASTIC TRAY ORGANIZER 35,37,38

PTT300I PLASTIC SURGICAL TRAY ORGANIZER 35,37

PTT300UI PLASTIC INSERT FOR TRAY 38

QBM001 R. QUÉTIN BONE MILL 55

QNTSK20 TAPERED IMPLANT STARTER (BASIC) KIT 32,33,34

QNTSK40 TAPERED IMPLANT QUAD SHAPING DRILL, PREMIUM SURGICAL KIT 32,33,34

QNTSK40U TAPERED IMPLANT QUAD SHAPING DRILL, PREMIUM UPGRADE KIT 32,33,34

QNTSKT QSD/NTDI SURGICAL TRAY 33

QSD3210 QUAD SHAPING DRILL, 3.25MM(D) X 10MM(L) 32,40

QSD3211 QUAD SHAPING DRILL, 3.25MM(D) X 11.5MM(L) 32,40



QSD3285 QUAD SHAPING DRILL, 3.25MM(D) X 8.5MM(L) 32,40

QSD410 QUAD SHAPING DRILL, 4MM(D) X 10MM(L) 32,40

QSD411 QUAD SHAPING DRILL, 4MM(D) X 11.5MM(L) 32,40







Index









RASH3N NARROW RIGHT ANGLE LARGE HEX DRIVER TIP, 24MM(L) 26,30,34,36,38

RDCA205 CANCELLOUS, PARTIALLY DEMINERALIZED, 0.5CC, 200-300µm 53

RDCA210 CANCELLOUS, PARTIALLY DEMINERALIZED, 1CC, 200-300µm 53



RDCA305R CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 300-500µm 54


RDCA310R CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 1CC, 300-500µm 54


RDCA320R CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 2CC, 300-500µm 54




RDCO205 CORTICAL, PARTIALLY DEMINERALIZED, 0.5CC, 200-300µm 53

RDCO205R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 200-300µm 54

RDCO210 CORTICAL, PARTIALLY DEMINERALIZED, 1CC, 200-300µm 53



RDCO305R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 300-500µm 54


RDCO310R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 1CC, 300-500µm 54


RDCO320R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 2CC, 300-500µm 54




RD100 STAINLESS STEEL ROUND DRILL, 2MM(D) 36,37,40

RE100 RATCHET EXTENSION - SHORT, 6MM(L) 26,30,33,36,38,48

RE200 RATCHET EXTENSION - LONG, 15MM(L) 26,30,33,36,38,48

RMCA205 CANCELLOUS, MINERALIZED, 0.5CC, 200-300µm 53

RMCA205R CANCELLOUS, MINERALIZED, IRRADIATED, 0.5CC, 200-300µm 54

RMCA210 CANCELLOUS, MINERALIZED, 1CC, 200-300µm 53



RMCA305R CANCELLOUS, MINERALIZED, IRRADIATED, 0.5CC, 300-500µm 54


RMCA310R CANCELLOUS, MINERALIZED, IRRADIATED, 1CC, 300-500µm 54





RMCO205 CORTICAL, MINERALIZED, 0.5CC, 200-300µm 53

RMCO210 CORTICAL, MINERALIZED, 1CC, 200-300µm 53



RMCO305R CORTICAL, MINERALIZED, IRRADIATED, 0.5CC, 300-500µm 54


RMCO310R CORTICAL, MINERALIZED, IRRADIATED, 1CC, 300-500µm 54





ROAP05 REGENEROSS® ALLOGRAFT PUTTY, 0.5CC SYRINGE 54

ROAP10 REGENEROSS ALLOGRAFT PUTTY, 1CC SYRINGE 54

ROAP20 REGENEROSS ALLOGRAFT PUTTY, 2CC SYRINGE 54

ROX05 ENDOBON® XENOGRAFT GRANULES, 0.5ML PACK 55

ROX10 ENDOBON XENOGRAFT GRANULES, 1ML PACK 55

ROX20 ENDOBON XENOGRAFT GRANULES, 2ML PACK 55

ROXLG20 ENDOBON XENOGRAFT GRANULES, 1000–2000µm, 2ML 55



SEKT1 SINUS ELEVATION KIT 50

SEKTR SINUS ELEVATION TRAY 50

SGD275A NAVIGATOR® TWIST DRILL 2.75MM(D) X A(L) 29

SGD275B NAVIGATOR TWIST DRILL, 2.75MM(D) X B(L) 29

SGD275C NAVIGATOR TWIST DRILL, 2.75MM(D) X C(L) 29

SGD275D NAVIGATOR TWIST DRILL, 2.75MM(D) X D(L) 29

SGD275E NAVIGATOR TWIST DRILL, 2.75MM(D) X E(L) 29

SGD275Y NAVIGATOR TWIST DRILL, 2.75MM(D) X Y(L) 30

SGD275Z NAVIGATOR TWIST DRILL, 2.75MM(D) X Z(L) 30

SGD2A NAVIGATOR TWIST DRILL, 2MM(D) X A(L) 29

SGD2B NAVIGATOR TWIST DRILL, 2MM(D) X B(L) 29

SGD2C NAVIGATOR TWIST DRILL, 2MM(D) X C(L) 29

SGD2D NAVIGATOR TWIST DRILL, 2MM(D) X D(L) 29

SGD2Y NAVIGATOR TWIST DRILL, 2MM(D) X Y(L) 30

SGD2Z NAVIGATOR TWIST DRILL, 2MM(D) X Z(L) 30

SGD325A NAVIGATOR TWIST DRILL, 3.25MM(D) X A(L) 29



SGD325D NAVIGATOR TWIST DRILL, 3.25MM(D) X D(L) 29

SGD325E NAVIGATOR TWIST DRILL, 3.25MM(D) X E(L) 29








SGD3A NAVIGATOR TWIST DRILL, 3MM(D) X A(L) 29

SGD3B NAVIGATOR TWIST DRILL, 3MM(D) X B(L) 29

SGD3C NAVIGATOR TWIST DRILL, 3MM(D) X C(L) 29

SGD3D NAVIGATOR TWIST DRILL, 3MM(D) X D(L) 29

SGD3E NAVIGATOR TWIST DRILL, 3MM(D) X E(L) 29

SGD3Y NAVIGATOR TWIST DRILL, 3MM(D) X Y(L) 30

SGD3Z NAVIGATOR TWIST DRILL, 3MM(D) X Z(L) 30





Index


SGD425Z NAVIGATOR® TWIST DRILL, 4.25MM(D) X Z(L) 30

SGD2E NAVIGATOR TWIST DRILL, 2MM(D) X E(L) 29

SGDPH1 NAVIGATOR DRILL POSITIONING HANDLE 1 30





SGIAM4L NAVIGATOR CERTAIN® ANALOG MOUNT, 4.1MM(D) - LONG 28

SGIAM4S NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) - SHORT 28

SGIAM5L NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) - LONG 28

SGIAM5S NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) - SHORT 28

SGIAM41 NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 1(L) 31




SGIAM51 NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 1(L) 31




SGIIM4L NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) - LONG 26

SGIIM4S NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) - SHORT 26

SGIIM5L NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) - LONG 26

SGIIM5S NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) - SHORT 26

SGIIM41 NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 1(L) 30




SGIIM51 NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 1(L) 30

SGIIM52 NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 2(L) 30

SGISD5 NAVIGATOR CERTAIN STARTER DRILL, 5MM(D) 29

SGKIT NAVIGATOR SURGICAL KIT 29,30

SGLKIT NAVIGATOR LABORATORY KIT 31

SGLTRAY NAVIGATOR LABORATORY TRAY 31

SGQ-ER20H OSSEOCISION® 20:1 HANDPIECE 22

SGSD34 NAVIGATOR STARTER DRILL, 3/4MM(D) 29

SGSD4 NAVIGATOR STARTER DRILL, 4.1MM(D) 29

SGSD45 NAVIGATOR STARTER DRILL, 4/5MM(D) 29

SGT25 STENT GUIDE TUBE (25PK) 48

SGTAP4 NAVIGATOR BONE TAP, 4.1MM(D) 30

SGTAP45 NAVIGATOR BONE TAP, 4/5MM(D) 30

SGTAP5 NAVIGATOR BONE TAP, 5MM(D) 30

SGTCD4L TAPERED NAVIGATOR COUNTERSINK DRILL, 4.1MM(D) - LONG 25

SGTCD4S TAPERED NAVIGATOR COUNTERSINK DRILL, 4.1MM(D) - SHORT 25

SGTCD5L TAPERED NAVIGATOR COUNTERSINK DRILL, 5MM(D) - LONG 25

SGTCD5S TAPERED NAVIGATOR COUNTERSINK DRILL, 5MM(D) - SHORT 25

SGTCP4L TAPERED NAVIGATOR CORTICAL PERFORATOR, 4.1MM(D) - LONG 25

SGTCP4S TAPERED NAVIGATOR CORTICAL PERFORATOR, 4.1MM(D) - SHORT 25

SGTCP5L TAPERED NAVIGATOR CORTICAL PERFORATOR, 5MM(D) - LONG 25

SGTCP5S TAPERED NAVIGATOR CORTICAL PERFORATOR, 5MM(D) - SHORT 25

SGTD19A TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X A(L) 25

SGTD19B TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X B(L) 25

SGTD19C TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X C(L) 25

SGTD19D TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X D(L) 25

SGTD19E TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X E(L) 25

SGTD19F TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X F(L) 25

SGTD19G TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X G(L) 25

SGTD410L TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 10MM(L) - LONG 26

SGTD410S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 10MM(L) - SHORT 25

SGTD411L TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 11.5MM(L) - LONG 26

SGTD411S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 11.5MM(L) - SHORT 25





SGTD485L TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 8.5MM(L) - LONG 26

SGTD485S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 8.5MM(L) - SHORT 25

SGTD510L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 10MM(L) - LONG 26

SGTD510S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 10MM(L) - SHORT 26

SGTD511L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 11.5MM(L) - LONG 26

SGTD511S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 11.5MM(L) - SHORT 26





SGTD585L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 8.5MM(L) - LONG 26

SGTD585S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 8.5MM(L) - SHORT 25

SGTDPHR TAPERED NAVIGATOR REDUCTION DRILL POSITIONING HANDLE 26

SGTDPHT TAPERED NAVIGATOR TWIST DRILL POSITIONING HANDLE 26

SGTLTRAY TAPERED NAVIGATOR LABORATORY TRAY 28

SGTP4 NAVIGATOR TISSUE PUNCH, 4.1MM(D) 29

SGTP5 NAVIGATOR TISSUE PUNCH, 5MM(D) 29

SGTRAY NAVIGATOR SURGICAL TRAY 29

SGTT410L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 10(L) - LONG 27

SGTT410S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 10(L) - SHORT 27

SGTT411L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 11.5(L) - LONG 27

SGTT411S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 11.5(L) - SHORT 27





SGTT485L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 8.5(L) - LONG 27

SGTT485S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 8.5(L) - SHORT 27

SGTT510L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 10(L) - LONG 27

SGTT510S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 10(L) - SHORT 27

SGTT511L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 11.5(L) - LONG 27

SGTT511S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 11.5(L) - SHORT 27





SGTT585L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 8.5(L) - LONG 27

SGTT585S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 8.5(L) - SHORT 27

SGTTAPT TAPERED NAVIGATOR BONE TAP TRAY 27

SGTTP4 TAPERED NAVIGATOR TISSUE PUNCH, 4.1MM(D) 25

SGTTP5 TAPERED NAVIGATOR TISSUE PUNCH, 5MM(D) 25

SGTTRAY TAPERED NAVIGATOR SURGICAL TRAY 25

Index


TAP10 BONE TAP, 3.75MM(D) X 7-10MM(L) 42



TAP410 BONE TAP, 4MM(D) X 7-10MM(L) 42

TAP413 BONE TAP, 4MM(D) X 7-13MM(L) 36,37,42

TAP420 BONE TAP, 4MM(D) X 7-20MM(L) 42

TAP518S BONE TAP, 5MM(D) X 7-18MM(L) 42

TAP53S BONE TAP, 5MM(D) X 7-13MM(L) 36,37,42

TAP58S BONE TAP, 5MM(D) X 7-8.5MM(L) 42

TAP618S BONE TAP, 6MM(D) X 7-18MM(L) 42

TAP63S BONE TAP, 6MM(D) X 7-13MM(L) 36,37,42

TAP68S BONE TAP, 6MM(D) X 7-8.5MM(L) 42

TE003 TITANIUM ELEVATOR 46

TF002 TITANIUM FORCEPS 46

THA42 EP® 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 2MM(H) 17

THA43 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 3MM(H) 17




THA52 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 2MM(H) 17













THRC4 TEMPORARY HEALING RETENTION CYLINDER, 4.1MM(D) X 4MM(H) 17

THRC6 TEMPORARY HEALING RETENTION CYLINDER, 4.1MM(D) X 6MM(H) 17

TIBC1 TITANIUM NITRIDE COATED BONE CARRIER FOR SEKT1 50

TIPL1 LARGE TITANIUM PLUGGER 50

TIPS1 SMALL TITANIUM PLUGGER 50

TMP80 TISSUE MEASURING POST 47

TP001 TISSUE PUNCH, 4.1MM(D) 48

TP005 TISSUE PUNCH, 5MM(D) 48

TP006 TISSUE PUNCH, 6MM(D) 48

TRE02 TREPHINE BUR - 2MM INSIDE DIAMETER/3MM OUTSIDE DIAMETER 50




TRE08 TREPHINE BUR - 8MM INSIDE DIAMETER/9.3MM OUTSIDE DIAMETER 50

TST01 TITANIUM SUCTION TIP 46

U166-013 OSSEOCISION® ELECTRICAL POWER CORD, 120V 22

U198-013 OSSEOCISION ELECTRICAL POWER CORD, 230V (AUSTRALIA) 22

U260-414 OSSEOCISION ELECTRICAL POWER CORD, 230V (EUROPE) 22

U195-152 OSSEOCISION FUSES (100V/120V) 22

U197-152 OSSEOCISION FUSES (230V) 22

U370-152 OSSEOCISION COOLANT SOLUTION HANGER POST 22

U370-003 OSSEOCISION CONTROL UNIT, 100V 22



U389-013 OSSEOCISION ELECTRICAL POWER CORD, 100V 22

WR150 RATCHET WRENCH 26,30,33,36,38,46

WTH52 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H) 18









WTH572 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 7.5MM(P) X 2MM(H) 18
















XDG00 GELB X-RAY DEPTH GAUGE KIT 48

XDG01 GELB X-RAY DEPTH GAUGE KIT, 2.3MM(D) 48

XDG13 GELB X-RAY DEPTH GAUGE, 2MM(D) X 13MM(L) 48

XDG20 GELB X-RAY DEPTH GAUGE, 2MM(D) X 20MM(L) 48

XDG2313 GELB X-RAY DEPTH GAUGE, 2.3MM(D) X 13MM(L) 48

XDG2320 GELB X-RAY DEPTH GAUGE, 2.3MM(D) X 20MM(L) 48

XFOS310 OSSEOTITE® 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L) 9

XFOS311 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 9

XFOS313 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L) 9

XFOS315 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L) 9



XFOS410 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L) 9

XFOS411 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 9










Index


XFOS585 OSSEOTITE® 2 PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L) 9




XFOS615 OSSEOTITE® 2 PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L) 9



XFOSM310 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 9

XFOSM311 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 9





XIFNT3210 OSSEOTITE TAPERED CERTAIN® IMPLANT, 3.25MM(D) X 10MM(L) 3

XIFNT3211 OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 11.5MM(L) 3

XIFNT3213 OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 13MM(L) 3

XIFNT3215 OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 15MM(L) 3

XIFNT3285 OSSEOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 8.5MM(L) 3

XIFNT410 OSSEOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 10MM(L) 3

XIFNT411 OSSEOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 11.5MM(L) 3














XIFOSM310 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 53.25MM(D) X 10MM(L)

XIFOSM311 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 53.25MM(D) X 11.5MM(L)



XIFOSM385 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 53.25MM(D) X 8.5MM(L)

XIFOSS410 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 54MM(D) X 10MM(L)

XIFOSS411 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 54MM(D) X 11.5MM(L)














XIIOS4310 OSSEOTITE 2 CERTAIN PREVAIL® IMPLANT, 24MM(D) X 3.4MM(P) X 10MM(L)

XIIOS4311 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(P) X 11.5MM(L)

XIIOS4313 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 24MM(D) X 3.4MM(P) X 13MM(L)








XIIOS6510 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 26MM(D) X 5MM(P) X 10MM(L)

XIIOS6511 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 26MM(D) X 5MM(P) X 11.5MM(L)



XIIOS6585 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 26MM(D) X 5MM(P) X 8.5MM(L)

XIITP4310 OSSEOTITE TAPERED CERTAIN PREVAIL IMPLANT, 14MM(D) X 3.4MM(P) X 10MM(L)

XIITP4311 OSSEOTITE TAPERED CERTAIN PREVAIL IMPLANT, 14MM(D) X 3.4MM(P) X 11.5MM(L)




Index

Item# Description Page#

XIITP5410 OSSEOTITE® TAPERED CERTAIN® PREVAIL IMPLANT, 15MM(D) X 4.1MM(P) X 10MM(L)


XIITP5413 OSSEOTITE TAPERED CERTAIN PREVAIL® IMPLANT, 15MM(D) X 4.1MM(P) X 13MM(L)



XIITP6510 OSSEOTITE TAPERED CERTAIN PREVAIL IMPLANT, 16MM(D) X 5MM(P) X 10MM(L)

XIITP6511 OSSEOTITE TAPERED CERTAIN PREVAIL IMPLANT, 16MM(D) X 5MM(P) X 11.5MM(L)



XIITP6585 OSSEOTITE TAPERED CERTAIN PREVAIL IMPLANT, 16MM(D) X 5MM(P) X 8.5MM(L)

XTAP518S OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-18MM(L) 42

XTAP53S OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-13MM(L) 36,37,42

XTAP58S OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-8.5MM(L) 42

XTAP618S OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-18MM(L) 42

XTAP63S OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-13MM(L) 36,37,42

XTAP68S OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-8.5MM(L) 42

Y900-083 OSSEOCISION® IRRIGATION TUBE HOLDER 22

Y900-114 OSSEOCISION IRRIGATION TUBES, DISPOSABLE (10/PACK) 22

Z095-102 OSSEOCISION MOTOR CRADLE 22

Z103-101 OSSEOCISION HANDPIECE WRENCH 22

Z114-090 OSSEOCISION SPRAY LUBRICANT NOZZLE 22

Z144-095 OSSEOCISION NOZZLE CLEANING FINE WIRE 22

Z272-004 OSSEOCISION FOOT CONTROL (3.5M) 22

Product Ordering FormCustomer Account# Date: ____/____/____

___________________________Representative taking order

Bill To:____________________________________________________________________________________________________________________________________________________________

Phone #: ( )______________________________________

Ship To:__________________________________________________________________________________________________________________________________________________________

Phone #: ( )______________________________________

Would you like to receive information via email about BIOMET 3i’s Products, Services and Events? ■ Yes ■ No

Email Address: __________________________________

Special Instructions:

Contact Name:

Customer P.O. #:_______________________________________

Method of Shipment: _____FedEx _____UPS

_____Next Day by 8:30am_____Next Day by 10:30am_____Next Day - Afternoon_____Two Day_____Ground_____Other_____________

Method of Payment:■ Credit Card: _____Visa _____MasterCard _____AMEX

Card #:____________________________________________Expiration Date:_____________________________________

■ C.O.D.

■ Bill - Net 30

Product No. Quantity Description Discount Unit Price Total

Date: Order Number: Order Total: Customer Service Representative:

Thank you for your patronage!

BIOMET 3i4555 Riverside DrivePalm Beach Gardens, FL 33410Phone: 800-342-5454 • Fax: 561-776-1272Website: www.biomet3i.com

Customer Name: Specialty:

Ordering Information

Some products may not be available outside the U.S.A.Algunos productos no se comercializan fuera de EE.UU.Certains produits ne sont pas disponibles en dehors des États-Unis.Einige Produkte sind außerhalb der USA nicht erhältlich.

To Place An Order:Contact your local Representative or call: BIOMET 3i Customer ServiceMonday–Thursday 8am–8pm (EST)Friday 8am–6:30pm (EST)1-800-342-5454, Fax: 561-776-1272In Canada: 1-800-363-1980, Outside the U.S.: +1-561-776-6700

TERMS AND CONDITIONS OF SALE. The following are the terms andconditions by which BIOMET 3i sells its products.

GOVERNING TERMS. Any shipment of products shall be deemed to be on theterms and conditions stated herein. Any and all terms and conditions submitted byPurchaser are hereby rejected.

TAXES. The prices set forth herein do not include any sales, use, excise, advalorem, property or other taxes applicable to the sale, use or delivery of theproducts, all of which shall be paid by Purchaser separately or added to thecontract price and paid by Purchaser to BIOMET 3i.

PRICES. The prices set forth for the products are in United States Dollars.

DELIVERY. Products sold hereunder shall be delivered F.O.B. to manufacturer’splant or distributor’s plant, as applicable. Purchaser shall assume responsibility forall subsequent delivery or shipping charges.

PAYMENT. Payment terms shall be as set forth under the Terms section on frontof invoice.

WARRANTY. BIOMET 3i nor any of its affiliates make any warranty, express orimplied, except that its products shall be free from defects in material and/orworkmanship. This warranty applies only to the original purchaser. In the event of aproduct defect, immediately notify BIOMET 3i of the defect prior to returning theproduct. Devices shall be sterilized prior to return. As its sole obligation and aspurchaser’s sole remedy under this warranty, BIOMET 3i will, at its option, eitherrepair, replace or issue credit for such products. Purchaser assumes all risks andliability resulting from the use of these products, whether used separately or incombination with other products.

Except for the warranty expressly described in the warranty paragraph above,neither BIOMET 3i nor any of its affiliates makes any other warranty with respect tothe BIOMET 3i products, expressed or implied, written or oral, including, withoutlimitation, any implied warranty of merchantability, or a warranty of fitness for aparticular purpose.

EDUCATION; MODIFICATION OF PRODUCTS. BIOMET 3i stronglyrecommends completion of formal post graduate implant education and strictadherence to the procedures described in BIOMET 3i’s Implant InstructionManuals. BIOMET 3i continually strives to improve its products and thereforereserves the right to improve, modify or discontinue products at any time, or tochange specifications of the products without notice and without incurring anyobligation.

RETURN POLICY. A Purchaser may return any BIOMET 3i Product within 90days of the invoice date. BIOMET 3i Products returned within 60 days of theinvoice date will be accepted without any re-stocking fee to the Purchaser.BIOMET 3i Products returned between 61 and 90 days of the invoice date will besubject to a 15% restocking fee. A BIOMET 3i Product will be accepted for returnonly if the BIOMET 3i Product is (1) returned in its original, unopened package(including autoclavable products); (2) received by BIOMET 3i within 90 days afterthe invoice date for that product; and (3) returned freight prepaid to 4555 RiversideDrive, Palm Beach Gardens, Florida 33410, (Attention: Returns Department)accompanied by the BIOMET 3i Return Authorization Number provided byBIOMET 3i’s Customer Service Department. Purchaser should be advised thatBIOMET 3i Products not meeting the above criteria will not be accepted for return.

EXCHANGE POLICY. BIOMET 3i Products may be exchanged within 180 daysof the invoice date, without a re-stocking fee, for other BIOMET 3i Products ofequal or lesser value within the same product family as determined by BIOMET 3i(ex. implant for implant, abutment for abutment, membrane for membrane).BIOMET 3i Products may be exchanged within 180 days of the invoice date forother BIOMET 3i Products of greater value within the same product family asdetermined by BIOMET 3i (ex. implant for implant, abutment for abutment,membrane for membrane), with the price differential paid by the Purchaser. In bothcases, the exchanged BIOMET 3i Product must be (1) returned in its original,unopened package (including autoclavable products); (2) a currently offeredBIOMET 3i Product (discontinued product not included); and (3) returned freightprepaid to 4555 Riverside Drive, Palm Beach Gardens, Florida 33410, (Attention:Returns Department) and accompanied by the BIOMET 3i Products ReturnAuthorization Number provided by BIOMET 3i’s Customer Service Department.

LICENSES, PERMITS AND EXPORT CONTROL. The timely securing ofpermits, licenses or other local, state or federal governmental approvals required inconnection with Purchaser’s use of any products hereunder shall be the soleresponsibility of Purchaser and Purchaser shall bear the cost thereof. Unlessotherwise agreed between BIOMET 3i and Purchaser, products sold hereunder areonly for use in the United States. Purchaser agrees that the Purchaser will complyfully with all applicable state and federal laws and regulations and Purchaser shallindemnify BIOMET 3i for all losses, damages and penalties incurred as a result ofany violation of applicable state or federal law or regulations.

FORCE MAJEURE. BIOMET 3i shall not be liable for any loss or damage due tofailure or delay arising out of any cause beyond the reasonable control of BIOMET3i. In the event of any failure or delay resulting from such causes, an equitableadjustment of delivery and any other appropriate terms and conditions shall bemade. No such failure or delay shall be the basis for an increase in BIOMET 3i’sObligations nor any termination by Purchaser.

LIMITATION OF LIABILITY. Under no circumstances shall BIOMET 3i or any ofits affiliates be liable for business interruption, loss of profits, special, indirect,incidental or consequential damages of any nature and from any cause whetherbased in contract, warranty or tort (including negligence) or other legal theory, evenif BIOMET 3i has been advised of the possibility of such damages.

VALIDITY. If any provision of these Terms and Conditions is found to be illegal orunenforceable in any respect, such illegality or unenforcibility shall not affect anyother provision of these Terms and Conditions, all of which shall remainenforceable in accordance with their terms.

GENERAL PROVISIONS. The purchase of the products and these Terms andConditions are governed by the laws of Florida without regard to conflicts of lawprinciples. This document incorporates all oral and written representationsbetween the parties and constitutes the entire agreement and understanding ofthe parties with respect to the subject matter hereof and supercedes any and allother agreements either oral or written between the parties with respect to suchsubject matter. No amendment or modification may be made to this documentunless in writing and duly executed by an authorized representative of BIOMET 3i.

CAUTION. Federal (U.S.) Law restricts these devices to sale by or on the order ofa licensed healthcare practitioner. Devices labeled STERILE are certified to besterile unless sterile package is opened or damaged.

EXPORT ORDERS. Require advance payment or letter of credit. Shipments aremade either freight collect or paid by BIOMET 3i and added to invoice. Unlessspecial instructions are received with the order, the shipping method will bedetermined by BIOMET 3i, F.O.B. Palm Beach Gardens, Florida.

BIOMET 3i Registered Trademarks®: ACT, Advanced Cutting Technology,BellaTek, Biogran, Certain, DIEM, Encode, EP, GingiHue, Gold-Tite, IOL, Miniplant,Navigator, OSSEOCISION, OsseoGuard, OsseoGuard Flex, OSSEOTITE,OSSEOTITE XP, PreFormance, PREVAIL, Provide, QuickSeat, RegenerOss andZiReal are registered trademarks of BIOMET 3i LLC.

BIOMET 3i Trademarks™: BellaTek, NanoTite, Providing Solutions – OnePatient At A Time and Twist Lock are trademarks of BIOMET 3i LLC.

Calcigen is a trademark of BIOMET, Inc. Dolder is a registered trademark of Prof.Eugen Dolder, formerly the director of the School of Dentistry at the University ofZurich. Endobon is a registered trademark of BIOMET Deutschland GmbH.Responsible Manufacturer: Biomet France Sarl. LOCATOR is a registeredtrademark of Zest Anchors, Inc. Safescraper is a registered trademark of CGMS.p.A Divisione Medicale META.

DUNS #: 186127825

BIOMET 3i is listed in the CCR Database

©2012 BIOMET 3i LLC. All rights reserved.

Global Headquarters4555 Riverside DrivePalm Beach Gardens, FL 334101-800-342-5454Outside the U.S.: +1-561-776-6700Fax: +1-561-776-1272www.biomet3i.com

EC REPBIOMET 3iEurope, Middle East & AfricaWTC Almeda Park, Ed. 1, Planta 1ªPl. de la Pau, s/n08940, Cornellà de Llobregat(Barcelona) SpainPhone: +34-93-470-55-00Fax: +34-93-371-78-49

For More Information, Please Contact Your Local BIOMET 3i Sales Representative Or Visit Biomet3i.com

JoinUs

FollowUs

WatchUs

DownloadIt

REV D 10/12

BIOMET 3i Product catalog for surgical technologies

Documents

Transcript of BIOMET 3i Product catalog for surgical technologies