Bimbar Inflatable
-
Upload
melissa-morgan -
Category
Documents
-
view
229 -
download
1
Transcript of Bimbar Inflatable
-
8/11/2019 Bimbar Inflatable
1/36
BIMBAR INFLATABLE PACKERS
S.
A.
PRODUCTS, SYSTEMS AND SERVICE
-
8/11/2019 Bimbar Inflatable
2/36
Geopro is an independent company specializing inthe design and manufacture of inflatable packersmade of BIMBAR dilatable hose.The staff mainly composed of engineers, geologistsand technicians has as its main concern technicalimprovement and constant product innovation. With
such a policy, Geopro has positioned itself among theleaders in the inflatable packers industry.
A dynamic team, our driving force
Thanks to its extended BIMBAR packersrange, Geopro can rapidly respond toany particular customers request. Bridges,dam construction, tunnels excavation areprojects which all require the injection ofcement under pressure. The packer is an
important and reliable element in this pro-cedure. Our BIMBAR inflatable packers caneffectively isolate a borehole section andapply cement grouting under pressures ofseveral dozens of bar.
The packer, our know-how
G
eopro
S A
eopro
G
S A
Today, Geopro has extended its geogra-phical coverage to over 65 countries,strengthening its international commer-cial network of agents and customers.Our high-quality manufacturing processand products are trusted in countriessuch as Japan, Thailand, Canada and theUnited States of America.
An international network,our commercial force
Act iv i ty
Network
Edition1
2/2005
-
8/11/2019 Bimbar Inflatable
3/36
Contents
Packers
Introduction - Inflatable Packers BIMBAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single Packers BIMBAR , from 28 to 170 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZI double Packers BIMBAR from 28 to 170 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
" Tube manchettes '' applications and EK Extension Kit from 56 to 170 mm . . . . . . . . . . . .
TZ Double packers BIMBAR from 56 to 170 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Expansion curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use recommendations-Safety-Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inflating and deflating the packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single, double packers and sleeves order references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28 and 30mm spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42mm spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
56 to 102mm spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
130 and 170mm spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pumps and accessories
Hand pump, inflation and injection hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thermowelded twin hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Packer deflation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P160 PUMP for inflation of packers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cement grout pump PGP 35-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydrological measurements accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Packers for specific applicationsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing system for water wells from 8'' 1/4 to 12'' 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Large diameter inflatable packer : 273 mm (10''3/4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inflatable packer for wireline core barrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
8/11/2019 Bimbar Inflatable
4/36
-
8/11/2019 Bimbar Inflatable
5/36
Inflatable packers BIMBAR : introduction
G
eopro
SA
eopro
G
SA
Geopro manufactures and supplieplete range of inflatable packers arent diameters from 28 mm to kers inflatable elements of BIMBreinforced with two layers of steelnatural rubber.
The deflated packer is lowered inhole. The packer is then inflatedliquid injected through an inflatisection is thus isolated and hycement grouting works can be co
Thanks to their modular design,offer reliable and easy operation.can be replaced in the field and sin
ly adapted into double packers.
Some typical applications are:
tube manchettes grouting, rock grouting, permeability testing, bore-hole fluid sampling, bore-hole wall impression testi hydraulic fracture testing, industrial piping hydro-testing, water wells repair,
aquifers monitoring.
-
8/11/2019 Bimbar Inflatable
6/36
Inflatable single packers BIMBAR
Geopro manufactures a complete range of inflatable single packersavailable in nine different diameters from 28mm up to 170mm.These packers are mainly used for cement grouting, permeabilitytesting For monitoring and hydrology applications, Geopro manu-factures also these packers fully made of stainless steel.
The basic components of the packers are :
The upper fixed end (FE) equipped with oneor two inflation inlets with one adapter.
The center pipe (CP), made of stainless steel
The dilatable element (S), mounted withsteel fittings on both sides
The sliding end (SE), equipped, up to 102mm, with a scraper ring.
All Geopro packers are supplied withinflation adapter IA (quick coupling type).Cutting ring coupling are also available onrequest.
The length (L) of the dilatable element dependson the application requirements.Standard lengths are :
L : 300mm for 28,30 and 42mm packers. L : 500mm and 1000mm for 28,30, 42, 56, 72, 85 and 102mm packers. L : 1000mm for 130 and 170mm packers.
Other lengths are also available on request. These single packers can be easily
transformed into ZI double packer
N i l C ti C t l t b CP E i B
Main specifications and dimensions of single and double packers
-
8/11/2019 Bimbar Inflatable
7/36
ZI double inflatable Packers BIMBAR ( 28-170
Each single packer from 28mm to 170mm can easily be transformed into adouble packer assembly by adding a speci-fic element : the central element CE. Just
unscrew the sliding end from the singlepacker and replace it with the CE element.Complete the installation by screwing astandard inflatable element S (sleeve) anda plug PL on the lower part of the packer.
The perforated CE central element from 56mm to 170mm consists of a com-pact and perforated tube, with a diameter
identical to the whole packer assembly.This design makes the double packer ZIextremely robust and the external flushO.D. is particularly well adapted to micro-piles grouting and water pressure tests.
With 28,30 and 42mm packers, the nar-row space between the two packer ele-ments does not allow to use the same
tubular design.
Here, the CE element consists of 4 pipes,two of which are used for inflation of thelower packer.
A special characteristic of these packers isthat the injection zone (IZ) length remainsconstant after inflation.
28, 30, 42 56
Singlepacker
SE
CE
S
PL
Singlepacker
SE
CE
S
PL
-
8/11/2019 Bimbar Inflatable
8/36
''Tubes manchette
Use rec
For the double packers
applications may requirethan the standard one detral element length.
In this case, an EK extefacilitate extension betwements.
The 3 elements of the EK
The JF junction end
The ER extension pipe
The FE fixed end
These elements are easform a complete assemb
IZ
CE
JF
ER
IZ + EK
EK Extension
The ZI double packers designed for "tubes minjection zone length ( IZof the diameter of the tu
The bottom element of easy to introduce into an
chettes.
The choice of which pack manchettes inner diamtion chart shown on the l
Packer "tube manchettes" Diameter
1" 1/4 1" 1/2 2"
YES YES NO
NO YES NO
NO NO YES
Packer 28 mm
Packer 30 mm
Packer 42 mm
-
8/11/2019 Bimbar Inflatable
9/36
-
8/11/2019 Bimbar Inflatable
10/36
Wo
10
20
30
40
50
60
70
80
90
100
110
120
130
140
Workingpressure(bar)
Bore-hole diameter (mm)
3040
5060
7080
90100
110120
130140
15
28 30
42
56
72
85
102
Bore-hole diameter (inch)
2" 2"1/2 3" 3"1/2 4" 5"1/21"1/2 4"1/2 5" 6
Workingp
ressure(bar)
B h l di t ( )
10
20
30
40
50
60
70
80
140150
160170
180190
200210
220230
240250
260
170
130
Bore-hole diameter (inch)
6" 6"1/2 7" 7"1/2 8" 8"1/2 9" 9"1/2 10" 10
Maximum workingpressures for 28 to
102 versusborehole diameter
Maximum workingpressures for 130 to
170 versusborehole diameter
-
8/11/2019 Bimbar Inflatable
11/36
Expansion curves
90
100
110
120
130
140
150
160
170
180
190
200
0 1 2 3 4 5 6 7 8 9 10 1
bar
mm
Expansion curve - packers 102 mm
35
45
55
65
75
85
95
0 5 10 15 20 25 30 35
bar
mm
Expansion curve - packers 42 mm
50
60
70
80
90
100
110
120
130
0 2 4 6 8 10 12 14 16
bar
mm
Expansion curve - packers 56 mm
60
70
80
90
100
110
120
130
140
150
160
170
0 1 2 3 4 5 6 7 8 9
bar
mm
Expansion curve - packers 72 mm
25
30
35
40
45
50
55
60
0 10 20 30 40 50 60 70
bar
mm
Expansion curve - packers 28 and 30 mm
70
80
90
100
110
120
130
140
150
160
170
180
190
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
bar
mm
Expansion curve - packers 85 mm
These curves are indicative only and vary slightly depending on the manufacturing batch
-
8/11/2019 Bimbar Inflatable
12/36
-
8/11/2019 Bimbar Inflatable
13/36
Inflating and deflating the packer
Different parameters determine the use o
These must be clearly identified in ordesuitable procedure for the planned applic
One of these parameters is the diameter
greater the diameter of the bore-hole, thmum operating pressure for the same pa
Another parameter is the depth of use athe bore-hole.
As well as this, it is advisable to check t(SWL) before and after placing the packe
The choice of inflating fluid (water or gas
the difference between the depth of uselevel in the bore-hole (SWL).
1) When inflating with gas, the pressure aface (pressure gauge) must correspond tion pressure, to which shall be added thwater-column ( one bar per 10 metres of wpacker.
For example, an packer is placed 100 m b
(SWL) and must be effectively inflated togauge pressure must be 30 bar: 100 metis approximately 10 bar plus the 20 bar ting the packer.
2) Water inflation. In this case, the prefrom the surface (pressure gauge) musdesired inflation pressure, which will bpressure from the height of the water (
inflation hose between the surface and t(SWL).
Using the same example for a height A of sure read on the surface pressure gauge mbar less 5 bar (50 metres).
Inflation Line
Surface
Static WaterLevel (SWL)
A (m)
Depthof the packerinstallation
-
8/11/2019 Bimbar Inflatable
14/36
Single, double packers and d
O
dilatable element S 28 to 170 mm
single packers SP 28 to 42 mm
single packers SP 56 to 170 mm
double packers DP type ZI 28 to 42 mm
double packers DP type ZI 56 to 170 mm
double packers DP type TZ 56 to 170 mm
Diameter (mm) S or SP or DP Dilatable element
length
Type
ZI or TZ
IZ in
zone
Examples
Single packer 56 L 1000
D bl k ZI L
5 6 S P 1 0 0 0
4 2 D P IZ3 0 0
How to order ?
L
L
L LIZ
L IZ
L IZ
-
8/11/2019 Bimbar Inflatable
15/36
Packers spare parts 28 and 30 mm
WTWelded
assembly
TORTightnessO-Ring
IAInflationadapter
SDilatableelement
TOR
TightnessO-Ring
SESlidingend
SORSlidingO-Ring
SJScraperseal
SORSlidingO-Ring
TORTightnessO-Ring
SJScraperseal
MMMCentralnipple
CECentralelement
ERExtension rod
JFJunctionfitting
TORTightnessO-Ring
Dilatable element 28
L 300 28 S 300
L500 28 S 500
L1000 28 S 1000
Special length 28 S length
Parts 28
WT L 300 28 WT 300
WT L 500 28 WT 500
WT L 1000 28 WT 1000
WT special length 28 WT length
SE 28 SE
CE (for IZ 340 mm) 28 CE 340
Packer partsOrder references
-
8/11/2019 Bimbar Inflatable
16/36
Packer spare
WTWeldedassembly
TORTightnessO-Ring
IAInflationadapter
SDilatableelement
TORTightnessO-Ring
SESlidingend
SORSlidingO-Ring
SJScraperseal
SJ2Scraperseal
MFF
Coupling
ERExtension rod
JFJunctionfitting
TORTightnessO-Ring
SDilatableelement
TORh
TORTightnessO-Ring
CECentral element
TOR
TightnessO-Ring
SORSlidingO-Ring
Dilatable ele
Special
WT
WTWT L
WT special
C
C
Packers Order re
-
8/11/2019 Bimbar Inflatable
17/36
Packers spare parts 56 to 102 mm
SESlidingend
CECentralelement
TOR
EKExtension
Kit
SDilatableelement
SJScraperseal
SOR
SlidingO-Ring
SJ2Scraperseal
TORTightnessO-Ring
IA/RIAInflationadapter
SDilatableelement
CPCentral tube
TORTightnessO-Ring
TORTightnessO-Ring
SORSlidingO-Ring
TORTightnessO-Ring
FEFixed end
BDSUppernipple
WTWelded
assembly
MFFCoupling
JFJunctionfitting
ERExtensionrod
FEFixed end
Dilatable element 56 72
L500 56 S 500 72 S 500
L1000 56 S 1000 72 S 1000
Special length 56 S Length 72 S Length
Part 56 72
WTL500 56 WT 500 72 WT 500
WTL1000 56 WT 1000 72 WT 1000
WT Spec. length 56 WT Length 72 WT Length
SE 56 SE 72 SE
CE (for IZ 500 mm) 56 CE 500 72 CE 500
CE (for IZ 1000 mm) 56 CE 1000 72 CE 1000
JF 56 JF 72 JF
PL 56 PL 72 PL
ER (for IZ 1000 mm) 56 ER 1000 72 ER 1000
ER(TUBE) Tube 3/4 Sch.40 Tube 11/4 Sch.40
EK (for IZ 500 mm) 56 EK 500 72 EK 500
EK (for IZ 1000 mm) 56 EK 1000 72 EK 1000
Packers partsOrder references
-
8/11/2019 Bimbar Inflatable
18/36
Packers spare parts 130
SESlidingend
CECentralelement
SDilatableelement
SORSlidingO-Ring
TORTightnessO-Ring
IAInflationadapter
SDilatableelement
TORTightnessO-Ring
TORTightnessO-Ring
SORSlidingO-Ring
TORTightness
O-Ring
WTWelded
assembly
Dilatable element 130
L1000 130 S 1000
Special length Consult us
Part 130
WTL 1000 130 WT 1000
WT Spec. length Consult us
SE 130 SE
Packers partsOrder references
-
8/11/2019 Bimbar Inflatable
19/36
Hand pump, inflation and injection hoses
Inflation hand pump
Max. output pressure: 100 bar (1450 PSI)
Tank: 6 litres
Plunger: 10 mmOrder Numer: VHP 100
Weight: 9,5 kg
Supplied with pressure gauge
0-100 bar and drain valve
Injection hoses
O i j ti h d f th ti bb i f d ith t l l
Inflation hoses
Low pressure inflation hose Nylon 3/6
Material: polyamide 12 Max. working pressure: 45 bar (at 20 C)
Inner diameter: 3 mm Outer diameter: 6 mm
Order Numer: IH36
High pressure reinforced inflation hoseTube: polyamide 12 Inner diameter: 4 mm
Braiding: polyester fiber Outer diameter: 8 mm
Cover: polyamide co-polymer micro-perforated Max. working pressure: 215 bar
Bending radius: 40 mm Weight: 4,9 kg / 100 m
Order Numer: RIH48
-
8/11/2019 Bimbar Inflatable
20/36
Thermow
The twin hose is used for injecting grouting or any other duct through a packer. One of the pipes is for inflation, ting.
The grouting hose is available in 2 sizes: 1/2 and 3/4 .is in both cases, a Rilsan 3 x 6 mm hose.
The injection hose has marks spaced 333 mm apart, aprecisely position the packer when tube manchettes
An extra length of the inflation hose allows it to be easilpackers end and to the inflation pump.
The twin hose is available in standard lengths of 25 and
Inflation hose
Operating pressure 75 bar
External diameter 6 mm
Internal diameter 3 mm
Material Polyamide 12
Protection sleeve Polyurethane
Grouting h
Nominal d
Operating
Bursting pr
External dia
Internal dia
Bend radiu
Traction re
Technical details
-
8/11/2019 Bimbar Inflatable
21/36
-
8/11/2019 Bimbar Inflatable
22/36
P160 PUMP for packers infla
Geopro supplies a largerange of air driven pumps.Six pump ratios are avai-lable from ratio 10 for out-put pressure of 70 bar/1025 psi up to ratio 115for a maximum outputpressure of 800 bar/11400psi. The output pressureis related to the pumpratio multiplied by the airinlet pressure. Our pumpratio 10 is specially well
adapted to the inflation of our inflatable packers. Other ratios wit3650 bar/52200psi are available on request.
In order to give the best support and service to our customers, these pumps are mounted or not on skids as per your requirements.They are also available in singleNumerous other applications of these pumps include hydrostatic pressure testinhydraulic systems, water infusion into coal seams
Set of spare seals and parts are available as well as kits to change the ration of the
Pump Max. pressure flow Volume per flowtype Ratio (bar/psi) max. (l/min.) cycle (cc) max. (l/min
P160-10 10 70/1025 26.3 98 50
P160-20 20 145/2100 13.2 48 25
P160-30 30 200/2850 9.5 35.3 18
P160-40 40 285/4100 6.4 24.5 12.2
P160-65 65 450/6400 4.2 15.7 8
P160-115 115 800/11400 2.4 8.8 4.5
Single acting Dou
Principle sketch / components
Double effect P160 pump S
-
8/11/2019 Bimbar Inflatable
23/36
PGP 35-5 Portable Grout Pump
The PGP35-5 grout pummotor air-driven, allows pressure of different fluidslurry or bentonite. It opebut efficient principle of acating differential area large air-operated piston
smaller high-pressure pispressed air flow into fluid re. The standard ratio of 5inlet pressure gives an ou500 psi ( 35 bar)*.Its reduced weight and stable for narrow space heavy equipment.
* The option PGP70-10 pump is available under request : 1000psi ( 70 bar ) , 6 gallons (35 litres) pe
Main specifications
Grout pressure 0-35 bar (0-500psi)
Inlet air pressure 0-7 bar ( 0-100 psi)
Flow rate 0-45 l/min (12 gallo
Air cylinder diameter 160 mm
Fluid cylinder diameter 70 mm
Suitable fluids water, bentonite mu
Valves ball type
Dimensions 700 x 500 x 400 mm
Pump skid assembly weight 38 kg ( 84 lbs)
-
8/11/2019 Bimbar Inflatable
24/36
-
8/11/2019 Bimbar Inflatable
25/36
Packers for specific applications
-
8/11/2019 Bimbar Inflatable
26/36
Geopro designs andzed inflatable packehydrologic applicatio
You will find some epages.
We remain at your dtable packers to your
Testing system forto 12''1/2
Packer 273mm (
Inflatable packer fo
Wireline Packer
Plug Packer from
Print packer
Pumpacker for wat
Hydrofracturation
-
8/11/2019 Bimbar Inflatable
27/36
Testing system for water wells
from 8 1/2 to 12 1/4
I.D 4"5/8 (118 mm)
O.D 4"
O.D 6"3/4 (170 mm)
Submersibleelectric pump
This new equipment basically intelargest inflatable packers 6" 3/4 ontoof 4" 5/8 inner diameter. This key s4" electric submersible pump to pconstant bore of the packer and cas
The most common application ampump-out testing of aquifers in isolquality and yield. Geopro suppliesready for field operation in deep wat
The main components of the testin
Geopro inflatable packer 170mm
(118mm) single or double. Casing tube element 128x118mm,
x box threads, available in 0.5, 1, 1
Casing attachment: shoe, lifting he
Hand pump model HP100 for pwater.
Reinforced hose 8x3 for inflation.
Geopro deflation device.
-
8/11/2019 Bimbar Inflatable
28/36
Large diameter inflatable packer : 2
Complementary to the B(28 to 170mm) Geopker of 275 mm (10 3/4)
This packer is designed 450mm (18). It is availaration with an external in
The central pipe in the bore of 102mm (4) and
Upon request other cent6 diameter with API, Dtion.
30
40
50
60
70
80
Operatingpressure(bar)
11" 12" 13" 14" 15"
Diameter of Bore-hole
-
8/11/2019 Bimbar Inflatable
29/36
Inflatable packers for wire-line core barrels
This system is an easy Geopro inflatable packecore bit in open hole meability testing.
This packer assembly inning ring which rests onshoulder. This positionfitted, on request, withcer for read out of theespecially useful for per
This simple and econotime for the rig operatoall makes of core barrel
Different options are av
pressure intake at top
double packer attachmzone test kits.
* pressure intake option
Injection hose
Inflatery hose
Positionning ring
-
8/11/2019 Bimbar Inflatable
30/36
Wireline
The Wireline Packer Systeconducting permeability t
The test is carried out witcing the time required to tions. Available for all m(N, H and P), Wireline pafield in just minutes.
The wireline packers incode the throat of the drill b
This positions both packcompression cap ''T'' on pressure loss around the The composite cable itsere nylon tube for inflationve the wireline packer.
Conducting a permeabilit
Remove inner tube asse
Raise drill string off bot
Install seal tee assembly
Lower wireline packer a
Tighten compression ca
Connect composite cable Inflate wireline packer.
Inject water through seaand packer into the test
Perform permeability te
Deflate wireline packer.
Remove packer and sea
Reinsert inner tube asse
Lower drill string and re
Inflating tubing
Core barrel element
Gland union
Bumper
Drill bit
Formationelement
Compositecable
Compressing cap Tmaintains pressurewithin drill string
Drill string remains inplace during test
Test fluid injectedthrough drill rods
(WL)
Wireline packer
Test zone
-
8/11/2019 Bimbar Inflatable
31/36
Pumpacker for water sampling
The Geopro "Pumpackconnection of an electrica single or double packe
Sampling is possible in
up to 100mm with pac
up to 140mm with pac
up to 170mm with pac
This system is fully mouse of standard Geopdouble.
EK extension kit is ava
interval between the infl
E-Motorlead
Watertight
connectors
Pressureintake inlet
Samplingsubmersible pump
Inflationline
Modular single ordouble packer
-
8/11/2019 Bimbar Inflatable
32/36
RISERLESS. A pumping assembly wi
Casing corrosion and bacterial contaminatioproblems occurring in water wells.The use of a riserless system guarantees pewithout extra cost during operation.
The assembly is composed of an inflatable submersible pump which is lowered with aOnce the packer is inflated, the casing is uscolumn. The part of the casing located betthe surface is always pressurized by water external contamination.
Efficient protection against bacter
Long term protection against casin
Fast set up and maintenance
Fully compatible with standard sub
-
8/11/2019 Bimbar Inflatable
33/36
Hydrofracturation Packers
Geopro offers a range of high-pressure inflatable packeture testing, cementing or any other application which req
The standard range comprises four diameters from 65 designed for bore-holes of 3, 4, 6, and 8 and opera400 bar (5800 psi). They are available both as single papackers configuration.
Connection to the central pipe is made by means of anthe upper end is equipped with two UMCA type inflation
InnerNominal Maximum diameter Upper Rubbdiameter dilatation of the pipe connection lengt
65 mm 130 mm 14 mm 1/2 NPT 1000 m
90 mm 180 mm 32.5 mm 1 1/4 NPT 1000 m
133 mm 240 mm 59 mm 2 1/2 NPT 1200 m
184 mm 300 mm 97 mm 4 NPT 1200 m
Diameter of Bore-hole (inch)
400
4503" 4" 6" 8"
D
D
Maximum operating pressures according to bore-ho
-
8/11/2019 Bimbar Inflatable
34/36
SWAGE PACKER. A repair systems
Corrosion of the casing is a veryproblem in water wells.
The swage packer methodaand efficiently a local repair or of water wells without comproproduction capacity of the wel
The method consists of using apacker to permanently deformcovered partially or completely seals against the existing casing
Benefits include :
Fast repair with ligth Initial diameter of the
Permanent mechanic
Compatible with prov
techniques.
BeforeRe-lining AfterR
Copyright Age Developments Pty Ltd
R h &
-
8/11/2019 Bimbar Inflatable
35/36
Geopro also designs a wide range of specific pro-ducts for different applications such as: Geotechnical engineering :
permeability tests, aquiferssamplings,
Environment:Supervision and study of nuclear waste
storage facilities,
Water: Reconditioning and maintenance of waterwells,
Research and development,our policy
We are committed to giving acomplete engineering andtechnical support to every custo-
mer. Geopro has created new part-nerships with university depart-ments and important industrialoperators. We work closely withvarious companies to guaranteethe success of advanced techno-logies developed for customersprojects.
Flexibility and customer service,our watchword
Research &Development
Serv ice
-
8/11/2019 Bimbar Inflatable
36/36
S.A.
24, boulevard Initialis7000 MONS - BELGIUM
Tl. : +32 (0)65 346000 - Fax : +32 (0)65 346020E-mail : info @geopro.be - Website : www.geopro.be
Field experience andtechnical expertise are the basis
of our company.
We design, manufacture and supplyinnovative equipment worldwide for:
- Consolidation and permeation grouting
- Ground water monitoring and testing
- Completion and maintenanceof water wells