BID ITEM WORKBOOK COSTARS-8 Maintenance, Repair ... · PA Certified Minority-owned Business...

447
BIDDER/CONTRACTOR'S LEGAL NAME: D/B/A NAME, IF APPLICABLE: BIDDER ADDRESS: COUNTY LOCATED IN: PA Legislative House District Number VENDOR NUMBER: PA Qualified Small Business (SB) PA Certified Minority-owned Business Enterprise (MBE) OR Primary POC regarding IFB/Contract: Secondary POC regarding IFB/Contract: PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS: COMPANY'S GENERAL WEBSITE ADDRESS SEND PURCHASE ORDER(S) TO NAME: D/B/A NAME, IF APPLICABLE: ADDRESS: COUNTY LOCATED IN: HOURS OF OPERATION: POC regarding PURCHASE ORDER(S): PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS: SEND PAYMENT(S) TO NAME: D/B/A NAME, IF APPLICABLE: ADDRESS: POC regarding PAYMENT(S): PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS: 800-798-8888 PO BOX 509058 San Diego, CA 92150-9058 Credit Services [email protected] (Subject Line: Credit Billing) 10641 Scripps Summit Ct. Attn: Gov't Call Center [email protected] 877-610-6912 877-219-8526 HD Supply Facilities Maintenance www.hdsupplysolutions.com 877-476-3073 860-333-3671 [email protected] Bruce Reifsteck / Ph # 267-981-1066 / [email protected] Brian Koski 800-930-4930 San Diego, CA 92131 HD Supply Facilties Maintenance / Gov't Call Center Woman-owned Business Enterprise (WBE) 4am to 5pm PST TBD San Diego County BID ITEM WORKBOOK BIDDER/CONTRACTOR DATA COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012) PA Legislative Senate District Number 10641 Scripps Summit Ct. Attn: Bid Dept. San Diego, CA 92131 San Diego County HD Supply Facilities Maintenance, Ltd.

Transcript of BID ITEM WORKBOOK COSTARS-8 Maintenance, Repair ... · PA Certified Minority-owned Business...

  • BIDDER/CONTRACTOR'S LEGAL NAME:

    D/B/A NAME, IF APPLICABLE:

    BIDDER ADDRESS:

    COUNTY LOCATED IN:

    PA Legislative House District Number

    VENDOR NUMBER:

    PA Qualified Small Business (SB)

    PA Certified Minority-owned Business Enterprise (MBE) OR

    Primary POC regarding IFB/Contract:

    Secondary POC regarding IFB/Contract:

    PHONE NUMBER:

    FAX NUMBER:

    EMAIL ADDRESS:

    COMPANY'S GENERAL WEBSITE ADDRESS

    SEND PURCHASE ORDER(S) TO NAME:

    D/B/A NAME, IF APPLICABLE:

    ADDRESS:

    COUNTY LOCATED IN:

    HOURS OF OPERATION:

    POC regarding PURCHASE ORDER(S):

    PHONE NUMBER:

    FAX NUMBER:

    EMAIL ADDRESS:

    SEND PAYMENT(S) TO NAME:

    D/B/A NAME, IF APPLICABLE:

    ADDRESS:

    POC regarding PAYMENT(S):

    PHONE NUMBER:

    FAX NUMBER:

    EMAIL ADDRESS:

    800-798-8888

    PO BOX 509058

    San Diego, CA 92150-9058

    Credit Services

    [email protected] (Subject Line: Credit Billing)

    10641 Scripps Summit Ct. Attn: Gov't Call Center

    [email protected]

    877-610-6912

    877-219-8526

    HD Supply Facilities Maintenance

    www.hdsupplysolutions.com

    877-476-3073

    860-333-3671

    [email protected]

    Bruce Reifsteck / Ph # 267-981-1066 / [email protected]

    Brian Koski

    800-930-4930

    San Diego, CA 92131

    HD Supply Facilties Maintenance / Gov't Call Center

    Woman-owned Business Enterprise (WBE)

    4am to 5pm PST

    TBD

    San Diego County

    BID ITEM WORKBOOK

    BIDDER/CONTRACTOR DATA

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    PA Legislative Senate District Number

    10641 Scripps Summit Ct. Attn: Bid Dept.

    San Diego, CA 92131

    San Diego County

    HD Supply Facilities Maintenance, Ltd.

    mailto:[email protected]%20(Subject%20Line:%20Credit%20Billing)mailto:[email protected]://www.hdsupplysolutions.com/mailto:[email protected]

  • PLEASE BE ADVISED - COMPLETE ALL QUESTIONS AND EXPLANATIONS FOR YOUR BID TO BE ACCEPTED AS A RESPONSIBLE AND RESPONSIVE BID

    YES NO

    X

    X

    X

    X

    X

    X

    X

    X

    X

    N/A

    X

    9) Is the Bidder-Contractor going to provide a dedicated COSTARS website for Purchasers (see

    Section 9 of the Standard Terms and Conditions )? If yes, how much time after notification of

    contract award will the Bidder-Contractor need to have the website up and running? 30 Days

    b.) If no, is the Bidder-Contractor including shipping costs in its pricing?

    4) Does the Bidder-Contractor offer any prompt payment discount(s)? If yes, please explain.

    8) If the Bidder is a manufacturer bidding directly, does the Bidder wish to offer contract items via its

    dealer network? If yes, please complete LIST OF AUTHORIZED DEALERS sheet of this workbook

    including supplier information and stating any dealer's territory breakdown (such as counties,

    municipalities, or regions). Also, indicate on the Bidder-Contractor Data Sheet a representative for

    Purchasers to contact regarding POs and payment.

    7) After notification of contract award, is the Bidder-Contractor willing to further negotiate pricing with

    COSTARS members?

    HD Supply Facilities Maintenance accepts the following Credit Cards: MC, VISA, Discover, American Express,

    Smart Pay, & HD Supply Charge Account.

    b.) If yes, does the Bidder-Contractor charge any fee(s) to the Purchaser for payment(s) made by

    credit card? If yes, please explain.

    6) Does the Bidder-Contractor charge any late fee(s) to the Purchaser for payment not made in

    accordance with Section 11 of the Standard Terms and Conditions ? If yes, please explain.

    COMMENTS

    1) Does the Bidder-Contractor have any minimum order requirements? If yes, please explain.

    QUESTION

    3) Does the Bidder-Contractor offer any pricing incentive(s) such as for Internet ordering? If yes,

    please explain.

    2) In accordance with Section 14 of the Standard Terms and Conditions , the Contractor shall deliver

    all item(s) F.O.B. Destination.

    a.) Is the Bidder-Contractor quoting shipping costs as a separate line item?

    5) a.) Does the Bidder-Contractor accept credit card(s) as a method of payment from any Purchaser?

    If yes, please specify the particular type(s) of card(s) accepted:

    The bidder shall answer the following questions:

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    QUESTIONS

    BIDDERS/CONTRACTOR'S LEGAL NAME: HD Supply Facilities Maintenance, Ltd.

  • Please refer to Section 5 of the COSTARS Contract Special Terms and Conditions for guidance.

    Statewide

    OR

    1 Adams 24 Elk 47 Montour

    2 Allegheny 25 Erie 48 Northampton

    3 Armstrong 26 Fayette 49 Northumberland

    4 Beaver 27 Forest 50 Perry

    5 Bedford 28 Franklin 51 Philadelphia

    6 Berks 29 Fulton 52 Pike

    7 Blair 30 Greene 53 Potter

    8 Bradford 31 Huntingdon 54 Schuylkill

    9 Bucks 32 Indiana 55 Snyder

    10 Butler 33 Jefferson 56 Somerset

    11 Cambria 34 Juniata 57 Sullivan

    12 Cameron 35 Lackawanna 58 Susquehanna

    13 Carbon 36 Lancaster 59 Tioga

    14 Centre 37 Lawrence 60 Union

    15 Chester 38 Lebanon 61 Venango

    16 Clarion 39 Lehigh 62 Warren

    17 Clearfield 40 Luzerne 63 Washington

    18 Clinton 41 Lycoming 64 Wayne

    19 Columbia 42 McKean 65 Westmoreland

    20 Crawford 43 Mercer 66 Wyoming

    21 Cumberland 44 Mifflin 67 York

    22 Dauphin 45 Monroe

    23 Delaware 46 Montgomery

    BID ITEM WORKBOOK

    SERVICE AREA

    SERVICE AREA

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BIDDERS/CONTRACTOR'S LEGAL NAME: HD Supply Facilities Maintenance, Ltd.

  • AUTHORIZED DEALER LEGAL NAME:

    D/B/A NAME, IF APPLICABLE:

    ADDRESS:

    COUNTY LOCATED IN:

    HOURS OF OPERATION:

    POC regarding PURCHASE ORDER(S):

    PHONE NUMBER:

    FAX NUMBER:

    EMAIL ADDRESS:

    AUTHORIZED DEALER LEGAL NAME:

    D/B/A NAME, IF APPLICABLE:

    ADDRESS:

    COUNTY LOCATED IN:

    HOURS OF OPERATION:

    POC regarding PURCHASE ORDER(S):

    PHONE NUMBER:

    FAX NUMBER:

    EMAIL ADDRESS:

    AUTHORIZED DEALER LEGAL NAME:

    D/B/A NAME, IF APPLICABLE:

    ADDRESS:

    COUNTY LOCATED IN:

    HOURS OF OPERATION:

    POC regarding PURCHASE ORDER(S):

    PHONE NUMBER:

    FAX NUMBER:

    EMAIL ADDRESS:

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    LIST OF AUTHORIZED DEALERS, IF APPLICABLE (Refer to "QUESTIONS" Tab, Question 8)

    INSERT AS MANY AS MAY BE NEEDED

  • BIDDERS/CONTRACTOR'S LEGAL NAME:

    Flooring

    PRODUCT CATEGORY(Identify all that are applicable with a checkmark.)

    The bidder must identify the product category(ies) and manufacturer line(s) for the items that the bidder is offering. If the Bidder is not a manufacturer, it must certifiy

    General Hardware

    Electrical Supplies

    in writing listing all manufacturers for which the Bidder is authorized to sell those manufacturer’s goods and materials, as required by this Contract.

    Refer to Paragraph 7.b. of the Instructions to Bidders for COSTARS Contracts for further guidance.

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    PRODUCT CATEGORY/MANUFACTURER LIST

    AMERICAN SECURITY PRODUCTS IMPORT, AMEROCK, ARMOR CONCEPTS, ARMSTRONG CEILINGS, AUTOMATIC SPECIALTIES, BLOOMFIELD

    MFG, C.H. HANSON, C.R. LAURENCE, CHAMBERLAIN GROUP, CLOSETMAID, D&D TECHNOLOGIES, DHI CORP, DSH, FALCON LOCK, FINDIN

    INDUSTRIAL CO, FLORENCE (CBUS), FLORENCE MFG, GE SUPRA, GLOBAL DOOR CONTROLS, GUARDIAN MANAGEMENT, HANDY TRAC,

    HOLMES SPRING MFG, ILCO-UNICAN, KABA ACCESS, KABA ILCO, KWIKSET, LAB, LARSON MFG, LCN, LEE ELECTRIC, LUCKY LINE PRODUCTS,

    LYNX ENTERPRISES, MASTER LOCK, NOBLE SALES CO, NORTON DOOR CONTROL, PARKLAND PLASTICS, PEMKO, PRIME LINE PRODUCTS,

    RANK DISTRIBUTORS, RITE SCREEN, RUBBERMAID WIRE, SAINT GOBAIN, SCHLAGE LOCK, SENTRY, SHEPHERD HARDWARE PRODUCTS,

    SOLAR GROUP, STRY-BUC INDUSTRIES, TAYMOR, ULTRA HARDWARE, UNIVERSAL FOREST RPODUCTS, UNIVERSAL HARDWARE, VON

    DUPRIN, WEISER LOCK

    HD Supply Facilities Maintenance, Ltd.

    MANUFACTURERS(State ALL that are applicable. Attach additional sheet(s) to this workbook if necessary.)

    360 ELECTRICAL, 3M, ACS MOTOROLA, ADAMAX INC, ALLIED TUBE: CONDUIT, AMERICAN TACK & HARDWARE, AUDIOVOX CORP, BAYCO,

    BLACK POINT PRODUCTS, BRK, BROTHER INTL, BUSSMANN, CANTEX INC, CATO INC, COLEMAN CABLE, COMQUIP, CONNECTICUT ELECTRIC

    & SWITCH, CUTLER-HAMMER (EATON ELECT), E.I. PRODUCTS, ETON CORP, FEIT ELECTRIC, FLORENCE MFG, FLUKE CORP, FLUKE

    NETWORKS, GARDNER BENDER, GE INTERLOGIX, GE PARTS, GENTEX CORP, GREENLEE/TEXTRON, HUBBELL ELECTRICAL, HUBBELL

    LIGHTING INC, HUBBELL WIRING, IDEAL INDUSTRIES, INTERMATIC, JOHNSTONE SUPPLY, KIDDE, KLEIN TOOLS, LEVITON, LG ELECTRONICS,

    LOREX CORP, LUTRON ELECTRONICS, NEW REMOTES INC, P&F USA, PACIFIC COAST BREAKER, PACIFIC ELECTROINCS CORP, PALADIN

    TOOLS, PASS & SEYMOUR/LEGRAND, PEERLESS INDUSTRIES, PHILIPS-ACCESSORIES & PERIPHER, PHILIPS LIGHTING, POTTER-ROEMER,

    PRIME LINE PRODUCTS, PRIME WIRE & CABLE INC, RADIATOR SPECIALTY, RESOURCES, SAFETY TECHNOLOGY INTL, SATCO PRODUCTS,

    SEE ALL INDUSTRIES, SIMA TECHNOLOGIES, SOUTHWIRE CO, SUPERIOR/HKF-WEST, SWANN COMMUNICATIONS, SYSTEMS DISTRIBUTORS

    LLC, TAUNTON TRADE CO, TAYMAC CORP, TELEADAPT, THERMWELL, THOMAS & BETTS, TRIPP MFG, TYCO ELECTRONICS, UNITED

    ELECTRICAL INTL, UNIVERSAL PRODUCT CONCEPTS, USI ELECTRIC, UTC FIRE & SAFETY, WATT STOPPER, WAY INTERGLOBAL NETWORK,

    WILLIAMS-PYRO, WIREMOLD

    ARMSTRONG FLOORING, BASE KING, CUSTOM BUILDING PRODUCTS, DAL TILE, DAP INC, FAB FLOORING, HOMAX, HYDE TOOLS,

    INTERCERAMIC, MANNINGTON MILLS, MOHAWK INDUSTRIES, NATIONAL CARPET, QEP, ROPPE CORP, SWIFF-TRAIN, SWIFF-TRAIN/WINTON

    TILE, THERMWELL, W.W. HENRY CO, AKZO NOBEL PAINTS

  • HVAC Filters AAF INTL, CLARCOR CO/PUROLATOR, FLANDERS PRECISIONAIRE, GE PARTS, GOODMAN, HART & COOLEY, JOHNSTONE SUPPLY, LL

    BUILDING PRODUCTS, RESEARCH PRODUCTS CORP, THERMWELL, WEB PRODUCTS

    Industrial Plumbing

    Hand & Power Tools

    HVAC

    ACME UNITED, ADAMAX INC, ADENNA, AERO CO, AKRO-MILLS, AMERICAN SAFETY RAZOR, APEX TOOL GROUP, ARROW FASTENER CO,

    BASIC MEDICAL, BILLY GOAT INDUSTRIES, BLASTER CHEMICAL CO, BRADY CORP-SIGNMARK, C.H. HANSON, C.S.B. INTL PRODUCTS,

    CAMPBELL GROUP, CERTIFIED SAFETY MFG, CHANNELLOCK, CHAPIN INTL, CLUB CAR, COBRA/SPEEDWAY TOOLS, CORONA CLIPPERS, CRC

    INDUSTRIES, CROWN BOLT, CUSTOM LEATHERCRAFT, DELMHORST INSTRUMENT CO, EAGLE MFG, EARTHWAY PRODUCTS, ECHO INC,

    EDSAL MFG, EDSAL SANDUSKY CORP, EKLIND TOOLS, EMERSON TOOL CO, EMSCO INC, ESCALERA INC, FALLTECH, GARDNER BENDER,

    GENERAC POWER SYSTEMS, GENERAL TOOLS, GENERAL WIRE SPRING CO, GERBER LEGENDARY BLADES, GLEASON INDUSTRIAL

    PRODUCTS, GSC TECHNOLOGIES, GUARDIAN EQUIPMENT, HAMPTON PRODUCTS INTL, HILLMAN GROUP, HITACHI KOKI USA, HONEYWELL

    SAFETY PRODUCTS, HYDE TOOLS, HY-KO, IMPACT ABSORBENT TECHNOLOGIES, IRWIN INDUSTRIAL TOOLS, ITW BUILDEX, JOHNSTONE

    SUPPLY, JUSTRITE, KENT LANDSBERG, KISSLER & CO, KLEIN TOOLS, LEATHERMAN TOOL GROUP, LORDAHL MFG CO, LOUISVILLE LADDER,

    LUCKY LINE PRODUCTS, MAKITA USA, MASTER LOCK, MAT MFG, MEDIQUE PRODUCTS, MIDWEST CAN CO, MILWAUKEE, MI-T-M CORP,

    MOBILE SHOP CO, MOEN, MTD, NIELSON PRODUCTS, NORTON, OATEY, OLYMPIA TOOLS, ONE WORLD TECH - DOMESTIC, ONE WORLD TECH -

    IMPORT, ORBIT IRRIGATION PRODUCTS, PACER TECHNOLOGY, PLASKOLITE INC, POSITEC, POULAN/WEED EATER, PRAMAC AMERICA, PRIME

    LINE PRODUCTS, PRIME SOURCE BUILDING PRODUCTS, PROFESSIONAL LABS INC, PULLMAN-HOLT CORP, QEP, RADIATOR SPECIALTY,

    RAPID RACK, RAPID RACK-IMPORT, READY AMERICA, RIDGE TOOL, RJS TECH, ROBERT BOSCH TOOL CORP, RUBBERMAID-COMMERCIAL,

    RUBBERMAID-HOME PRODUCTS, SAFETY WORKS LLC, SAS SAFETY CORP, SCHUMACHER ELECTRIC CORP, SCOTWOOD, SHEPHERD

    HARDWARE PRODUCTS, SHOP VAC CORP, SLOAN VALVE CO, SOG SPECIALTY KNIVES, SONIN, SPERIAN PROTECTION, STANLEY BLACK &

    DECKER: DEWALT, ULTRA HARDWARE, UNIMED-MIDWEST, VELCRO USA, VERMONT AMERICAN/R. BOSCH, WALLBOARD TOOL CO, WD-40,

    WINGITS INNOVATIONS, WORTHINGTON CYLINDERS, ZIRCON CORP

    AAF INTL, AC GUARD INC, AIRGAS, ALLSTYLE COIL CO, AMANA CO, AMERICAN METAL PRODUCTS, AO SMITH, ARMSTRONG PUMPS, BAY

    MOTOR PRODUCTS, BLUE RHINO, BROAN MFG, C.S.B. INTL PRODUCTS, CADET MFG, CARRIER/PAYNE CORP, CLARCOR CO/PUROLATOR, CPS

    PRODUCTS, CROWN BOLT, CUTLER-HAMMER (EATON ELECT), D&D WEST, DEFLECT-O, DIAL MFG, DIVERSITECH, DOOLCO, DUPONT,

    DUROGUARD-RHEEM MFG, ELECTROLUX HOME APPLIANCES, EMPIRE COMFORT SYSTEMS, ESCO INSTITUTE, FASCO DISTRIBUTING CO,

    FINDIN INDUSTRIAL CO, FIRST COMPANY, FLANDERS PRECISIONAIRE, FLINT WARM AIR, FRIEDRICH EQUIPMENT, FRIEDRICH PARTS, GE

    DISTRIBUTION, GE PARTS, HABEGGER CORP, HAIER AMERICA, HART & COOLEY, HONEYWELL, HOWARD BERGER, HUBBELL WIRING,

    HUNTER FAN CO, HYDRO-BALANCE, INFICON, JB INDUSTRIES, JOHNSTONE SUPPLY, KAZ USA, KING ELECTRICAL MFG, KLEIN TOOLS, LASKO

    PRODUCTS, LG ELECTRONICS, LL BUILDING PRODUCTS, LUX PRODUCTS, MAINSTREAM ENGINEERING CORP, MCDANIEL METALS, MCQUAY

    C/O PREMAIR, MEPCO LLC, MOTORS & ARMATURES, NAPCO, NIBCO, NORDYNE, O'BRIEN GLOBAL PRODUCTS, ORIENT INDUSTRIES,

    PACKARD INC, PRECISION ELECTRIC, PREMAIR - PARTS, PRIME LINE PRODUCTS, PRO LABEL, PSG CONTROLS, RECTORSEAL, REFRON,

    RESEARCH PRODUCTS CORP, RHEEM MFG - PARTS, ROTARY INDUSTRIAL LTD, SCHNEIDER ELECTRIC, SEALED UNITS PARTS CO (SUPCO),

    SILVER KING MFG, TACO, TAYMAC CORP, TEKQUEST INDUSTRIES, THERMWELL, TMGCO, TRANE, TRANE-PARTS, UNIVERSAL METAL

    INDUSTRIES, UNIWELD PRODUCTS, US AIRE, WATTS WATER TECHNOLOGIES, WEB PRODUCTS, WHITE-RODGERS, WILLBANKS &

    ASSOCIATES, WILLIAMS FURNACE, WINTERS INSTRUMENTS, YORK UPG - JOHNSON CONTROLS, YUHUAN SENDOE CO

  • 3M, ARGEE CORP, AKZO NOBEL PAINTS, BEST PRACTICES ENTERPRISES, C.H. HANSON, CAMPBELL GROUP, CONSTRUCTION METALS,

    COVALENCE ADHESIVES, DAP INC, DOW CHEMICAL CO, DUNBARTON, GARDNER ASPHALT, GRACO INC, HOMAX, HYDE TOOLS, ICI, IMPACT

    ABSORBENT TECHNOLOGIES, INMARK INC, JB WELD, LANCASTER DISTRIBUTING, LINZER, MACCO ADHESIVES, MASTERCHEM,

    MCKLANBURG-DUNCAN, MOMENTIVE PERFORMANCE MATERIAL, MOTSENBOCKER'S LIFT OFF, MR LONGARM, MULTITECH, NATION RUSKIN,

    NORTON, OSI/HENKEL ADHESIVES, PACER TECHNOLOGY, PREFOLLOW CO LTD, PURDY, QEP, RUST-OLEUM, SHERWIN WILLIAMS

    DIVERSIFIED, SHURTAPE, STANLEY BLACK & DECKER: STANLEY, SURFACE SHIELDS, THERMWELL, ULTRA HARDWARE, USG INC, W.W.

    HENRY CO, WALLBOARD TOOL CO, WM BARR, WOOSTER BRUSH CO

    Test Equipment

    Safety ADAMAX INC, BASIC MEDICAL, CERTIFIED SAFETY MFG, CUSTOM LEATHERCRAFT, FALLTECH, GUARDIAN EQUIPMENT, HONEYWELL SAFETY

    PRODUCTS, HY-KO, IMPACT ABSORBENT TECHNOLOGIES, MEDIQUE PRODUCTS, PROFESSIONAL LABS INC, READY AMERICA, SAFETY

    WORKS LLC, SAS SAFETY CORP, SPERIAN PROTECTION, TG MEDICAL, UNIMED-MIDWEST

    Security

    Pneumatics

    Pumps and Plumbing

    Outdoor Tools ACME UNITED, AMES TRUE TEMPER, APEX TOOL GROUP, BILLY GOAT INDUSTRIES, C.H. HANSON, CAMPBELL GROUP, CHANNELLOCK,

    CHAPIN INTL, CORONA CLIPPERS, EARTHWAY PRODUCTS, ECHO INC, EKLIND TOOLS, EMERSON TOOL CO, EMSCO, GARDNER BENDER,

    GENERAC POWER SYSTEMS, GENERAL TOOLS, GLEASON INDUSTRIAL PRODUCTS, HITACHI KOKI USA, HYDE TOOLS, IRWIN INDUSTRIAL

    TOOLS, KLEIN TOOLS, MAKITA USA, MILWAUKEE, MI-T-M CORP, MTD, ONE WORLD TECH - IMPORT, POULAN/WEED EATER, ROBERT BOSCH

    TOOL CORP, STANLEY BLACK & DECKER: DEWALT, STANLEY BLACK & DECKER: STANLEY, STANLEY PROTO INDUSTRIAL TOOLS,

    STARBUCK CORP, SUPERIOR TOOL, SYMMONS INDUSTRIES,

    Paint

    LED lighting AFX LIGHTING, AMERICAN LIGHTING, CAO GROUP, CORDELIA LIGHTING DOMESTIC, CREE, FEIT ELECTRIC, GAMASONIC USA, LIGHT

    EFFICIENT DESIGN, LITHONIA LIGHTING, OSRAM/SYLVANIA, PHILIPS LIGHTING, TECHNICAL CONSUMER PRODUCTS (TCP)

    Lamps and Ballasts

    Motors and Power Transmission

    Metalworking

    ACCESS LIGHTING, ADAMAX INC, ADDRESS-O-LITE, AIR COOL IND./YOUNGO LTD, AMERICAN FLUORESCENT, AMERICAN-DE ROSA

    LAMPARTS, COOPER LIGHTING, CRAFTMADE INT'L, CROWN PLASTICS, EIKO LTD, ENERGIZER HOLDINGS, FEIT ELECTRIC, FEIT ELECTRIC

    (IMPORT), GENESIS MFG, GLOBE UNION IND, GOOD EARTH LIGHTING, HALCO, INNOVATIVE CONCEPTS, INT'L LIGHTING DOMESTIC, J. HARRIS

    & SONS CO, J.T. EATON & CO, JESSUP MFG, JOHNSTONE SUPPLY, KEY ELECTRONICS, KICHLER LIGHTING, LIGHT PROCESS CO, LIGHTS OF

    AMERICA, LITECO, LITEX INDUSTRIES, LITHONIA LIGHTING, LUTRON ELECTRONICS, MADISON AVE LGITHING & FANS, MAG INSTRUMENT INC,

    MEESE ORBITRON DUNNE CO, NORTHERN PRODUCTS INC, OSRAM/SYLVANIA, OULIYA LIGHTING PRODUCTS FACTORY, PANTHER VISION,

    PHILIPS LIGHTING, POLYMER RPODUCTS, PRIMARY SOURCE, PROCTER AND GAMBLE/DURACELL, PROGRESS LIGHTING, REGAL KING

    COMMERCIAL, ROYCE LIGHTING, SATCO IMPORT, SATCO PRODUCTS, SEA GULL LIGHTING, SIMKAR CORP, SPECTRUM BRANDS/RAYOVAC,

    STREAMLIGHT, SUPERIOR LIGHT CORP LTD, TCP (IMPORT), TECHNICAL CONSUMER PRODUCTS (TCP), UNIVERSAL POWER GRP, VEOLIA E.S.

    TECHNICAL SOLUTIONS, VOLUME INTERNATIONAL CORP, WM LAMPTRACKER, WESTINGHOUSE LIGHTING CORP.

    Material Handling

  • BIDDERS/CONTRACTOR'S LEGAL NAME:

    ANCILLARY SERVICES

    BID ITEM WORKBOOK

    PRICING

    (If applicable. Please attach additional sheet(s) with detailed pricing if necessary.)

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    Extended Warranty

    Special Delivery Arrangements

    HD Supply Facilities Maintenance, Ltd.

    services, the Bidder shall simply note that it is offering the service and that the actual price will be negotiated between it and the COSTARS participant and annotated

    on the purchase order at time of order.

    A Contractor may choose to offer ancillary services in conjunction with the products it provides to the Purchaser. However, any ancillary services offered must be:

    (1) expressly authorized in the original IFB/Contract, (2) directly related to the delivery or normal use of the product or component parts purchased,

    (3) limited to the actual product or component parts purchased, and (4) initiated/ordered at the time of product purchase. Stand-alone services and services for products

    The Bidder may submit the list of ancillary services and prices it proposes to offer. If it is not possible to submit pricing, as may be the case with certain installation

    not purchased from this supply Contract, including existing equipment for which component parts from this contract are purchased, are not within the scope of

    this supply Contract. The Department of General Services reserves the right to determine which ancillary services shall be included in any contract.

    Customization

    ANCILLARY SERVICES

    (Identify all that are applicable with a checkmark.)

    Post Warranty Support Maintenance Service

    Training

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    360 ELECTRICAL

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    3M

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AAF INTERNATIONAL

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AC GUARD INC

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ACCESS LIGHTING

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ACME UNITED

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ACS MOTOROLA

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ADAMAX INC

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ADDRESS-O-LITE

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ADENNA

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AERO CO

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AFX LIGHTING

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AIR COOL IND/YOUNGO LTD

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AIRGAS

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AKRO-MILLS

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AKZO NOBEL PAINTS

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ALLIED TUBE: CONDUIT

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    ALLSTYLE COIL CO

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contract

    period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Terms and

    Conditions, Subsection 6.c.)

    PRICE LIST IDENTIFICATION:

    CATALOG

    VOLUME 62

    3/26/2012

    SAMPLE PRICING TEMPLATE

    It is suggested, but not required, that the Bidder submit pricing using the template.

    The Bidder shall attach and submit any different format with its Bid Item Workbook.

    After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or

    discounted prices were not included in the bid prices.

    The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.

    AMANA CO

    Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of Discount

    Suppliers Cost Plus % of Mark-up

    Custom List including Net Prices

    BID ITEM WORKBOOK

    COSTARS-8 Maintenance, Repair, & Operation Equipment & Supplies ("MRO") (04/23/2012)

    BID ITEM SHEET

    HD Supply Facilities Maintenance, Ltd.

    PRICING

    The Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection

    6.b. of the Special Terms and Conditions for further guidance.

  • BIDDERS/CONTRACTORS LEGAL NAME

    MANUFACTURER:

    PRICING STANDARD: (Check that which is applicable.) X

    CATALOG OR PRICE LIST NAME:

    IDENTIFICATION NO. (IF APPLICABLE):

    EFFECTIVE DATE:

    CLASS OF PURCHASER:

    (i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % DISCOUNT

    FROM LIST PRICE

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VARIES BY PRODUCT

    CATEGORY - SEE ATTACHED

    DISCOUNT LIST_%_______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND II

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    VOLUME BAND III

    [SPECIFY QUANTITY]

    % MARK-UP ABOVE COST

    SHEET

    _______% _______% _______%

    VOLUME BAND I

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND II

    [SPECIFY QUANTITY]

    NET PRICE

    VOLUME BAND III

    [SPECIFY QUANTITY]

    NET PRICE

    $______.__ $______.__ $______.__

    EXAMPLE - VOLUME PRICING

    ITEM CATEGORY

    Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain

    firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)

    Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain