BETTER, HEALTHIER, HAPPIER LIFE BS Medical · Tip point, Reversed cannula, Cannula Length, Tip...
Transcript of BETTER, HEALTHIER, HAPPIER LIFE BS Medical · Tip point, Reversed cannula, Cannula Length, Tip...
BETTER, HEALTHIER, HAPPIER LIFE
BSMedical
BS Medical is a manufacturer and supplier of medical devices and automatic medical device production lines in the bioscience field centering on research related to stem cells.
Despite its short history, it is growing rapidly as a company receiving attention from the world, and it is active worldwide, including its participation in Trade Development Conferences.
The management philosophy of BS Medical is the supply high quality products and fine service in order for clients to lead better and healthy lives, and for the improvement of health and extension of lives.It prioritizes client centered service, and is endeavoring to develop reliable products.
BS Medical promises to contribute to mankind through continued research and development for the healthy, happiness, and better quality of life. Your continued support and attention for us to continuously grow along with clients will be greatly appreciated.
Thank you.
CI
COMPANY
BS Medical Co., Ltd. is a corporation of determined will to provide the best quality products by integration of advanced technology and expert knowledge, pursuing. its aims with extreme challenges for the world's leading company in the fields of medical devices and equipment.
MISSION & VISION
With ceaseless R&D, BSM is going all out to develop and provide high quality products to lead humanity to a healthy and happy life. A global leader throughout the mission in the healthcare and medical field
Bio Science
MedicalEquipment
Consumable Machinery
2 BS Medical company profile company profile BS Medical 3
Automatic Assembly Line
AutomaticBlood Collection
Tube AssemblyMachine
1. Insulin Syringe Assembly Line (with auto packing)
2. Syringe Assembly Line(with auto packing) / 2parts / 3parts
3. Hypordermic Needle Assembly Line
4. Blood Collection Tube Assembly Line
5. Safety Blood Collection Needle Assembly Line
6. Scalp Vein Assembly Line
7. Cannula Manufacturing Line
8. Safety IV Catheter Assembly Line
9. Pen Needle Assembly Line
10. Dental Needle Assembly Line
11. IV Infusion set Assembly Line
12. Urine Bag Assembly Line
BS Medical manufactures more than 20 kinds of medical equipment manufacturing
facilities such as Vacuum blood tube, Pen needle, Syringe, IV catheter, etc.
All equipment has obtained CE certification recognized for quality and technology.
In particular, BS Medical’s facilities are equipped with unmanned inspection
and automatic sorting system (defective product), So that realized highly productivity
and maximum cost reduction by precisely inspecting and minimizing staffing.
BS Medical not only supplies automatic production line of existing products,
also supplies equipment in various forms as the clients’ request.
Unlike general engineering companies, BS Medical, with expertise in medical devices,
provides a wide range of consulting including market analysis, cost analysis, material supply
and demand, production, process control, plus marketing, which needs for production and sale.
4 BS Medical company profile company profile BS Medical 5
3. Hypodermic Needle Assembly Line
Division Specification Remark
Dimension 9235*3120*1800
Weight(Kg) 3500 kg
Jig Pin Q'ty 50 pcs
Electric Power 4P AC380V, 60/50Hz
Electric Power Consumption 10kw
Air Consumption 900 Liter/min
Production Capacity 50,000pcs/hour
No.of Worker 2 persons auto supply
System Controller PLC Panasonic
Inspection system Full automatic Inspection system Vision Camera
Others
Tip point, Reversed cannula, Cannula Length,
Tip orientation, Bonded condition, BlockageAutomatic Defective Ejecting System Only defective products
1. Insulin Syringe Assembly Line (with auto packing)
Division Specification Remark
Dimension (L*W*H) 6.5*1.5*2.0 M
Weight 2 Ton
Electric Power AC 3P 220V 50/60Hz
Electric Power consumption 10 Kw
Air pressure 6 Kg/㎠
Air Consumption 800 L/min
Production Capacity 10,000 ~ 12000 Pcs/Hr
No. of Worker 1 or 2 Persons
Tray transfer type Timing belt drive
Main Frame Material SB41, A6061, STS304, etc
Tray pin Q’ty 40 20pcs * 2 lines
Control system PC based control
O/S Windows7
4. Blood Collection Tube Assembly Line2. Syringe Assembly Line (with auto packing)
Division Specification
Dimension(L*W*H) mm 7900*3400*1800
Electric Power AC220V,60/50Hz
Electric Power Consumption 3.0kw
Air Consumption 600 Liter/min
InspectionVision system
Differential pressure blockage
Production Capacity 25,000pcs/hour
No. of Worker 2 persons (Assembly1, packing1)
Jig Type 30pins / 2types
OtherIncluded Barrel Printer
UV Bonding
Division Specification
Application Process Printing & Packing
Dimension(L*W*H) 3000*4000*1870
Weight(Kg) 2000
Frame Material A6061, Profile
Electric Power AC220V,60/50Hz
Electric Power Consumption 3.0kw
Air Consumption 600 Liter/min
Production Capacity 5,000~20,000 pcs/hour
No. of Worker 1 persons auto supply
Jig Pin Q'ty 50 pcs
Other Automatic Blister packing Machine
6 BS Medical company profile company profile BS Medical 7
Division Specification RemarkDimension (L*W*H) 8.4*4.8*1.8 M
Weight 3.5 TonElectric Power AC 4P 220V 50/60Hz
Electric Power Consumption 20 kwAir pressure 6 Kg/㎠
Air Consumption 1500 L/minCapacity 18,000 Pcs/Hr
Number of Worker 2 PersonsMain Frame Material AL62661 Cr Hard Coating
Hub supply Shut typeCannula supply Lift typeBonding thpe Wheel type(Epoxy)
Inspection system
Tip pointReserved cannulaCannula LengthTip orientation
Bonded conditionJig pin Q'ty 35 Pcs
Ejecting system Auto Defective product extractingControl system P.L.C
Division Specification
Dimension L*W*H (mm) 8070*5100*1400
Weight(Kg) 3500
Frame Material A6061
Electric Power 4P AC380V
Electric Power Consumption(kw) 20
Air Consumption 6kg/㎠, 60 Liter/min
Jig pin 12 pins
Inspection system Sensor
Inspection PointTip point, Reversed cannula, Cannula Length, Tip orientation,
Bonded condition, Differential pressure blockage
System controller PLC
Capacity 8500 pcs/hour
Number of workers 1 person
5. Safety Blood Collection Needle Assembly Line
6. Scalp Vein Assembly Line
Division SpecificationDimension 8,400*4,800*1,800
Weight 3500 kgJig Pin Q'ty 50 pcs
Electric Power 4P AC380V,60/50HzElectric Power Consumption 20kw
Air Consumption 900 Liter/minProduction Capacity 50,000pcs/hour
No. of Worker 2person auto supplySystem Controller Sensor
Inspection system
Full automatic Vision Camera systemTip point, Reversed cannula, Cannula Length, Tip
orientation, Bonded condition, Differential pressure
blockageAuto Defective product extractor
OthersFeeding only defective Remote real time monitoring
and control
Division Specification
Dimension 12000*8000*1800
Weight 4500 kg
Jig Pin Q'ty 36 pcs
Electric Power 4P AC380V,60/50Hz
Electric Power Consumption 10kw
Production Capacity 4000 pcs/hour
No. of Worker 4person
System Controller PLC
Inspection system
Full automatic Vision Camera system
Tip point, Reversed cannula, Cannula Length, Tip
orientation, Bonded condition, Differential pressure
blockage
OthersFeeding only defective Remote real time monitoring
and control
7. Cannula Manufacturing Line
8. IV Catheter Assembly Line (Safety IV Catheter)
8 BS Medical company profile company profile BS Medical 9
Division SpecificationDimension 8400*4800*1800
Weight 3500 kgJig Pin Q'ty 36 pcs
Electric Power 4P AC380V,60/50HzElectric Power Consumption 20kw
Air Consumption 900 Liter/minProduction Capacity 35,000 pcs/hour
No. of Worker 2 personSystem Controller PLC
Inspection system
Full automatic Vision Camera systemTip point, Reversed cannula, Cannula Length, Tip
orientation, Bonded condition, Differential pressure
blockage
OthersFeeding only defective Remote real time monitoring
and control
Division Specification
Dimension 12000*8000*1800
Weight 4500 kg
Electric power 36 pcs
Consumption of electric power 4P AC380V,60/50Hz
Air pressure 10kw
Air Consumption 4000 pcs/hour
Material of Frame 4person
Jig Pin PLC
Product capacity 3500pcs/hour
Inspection Method Sensor
Programing logic controller Panasonic
No. of workers 4 persons
Division Specification
Dimension 11000*3000*1800
Weight 3500 kg
Electric power AC380V, 4P
Consumption of electric power 25Kw
Air pressure 6kg/㎠
Consumption of air 100 liter/min
Capacity(Automatic) 450 pcs/Hr
Capacity(Semi-Auto) 300 pcs/Hr
Material of Frame A6061
Product capacity 450pcs/hour
Inspection Method Sensor
Programing logic controller Panasonic
No. of workers 1~2 persons
Division Specification
Dimension 11000*2700*1400
Weight 3500 kg
Jig Pin Q'ty 25 pcs
Electric Power 4P AC380V,60/50Hz
Electric Power Consumption 10kw
Air Consumption 900 Liter/min
Production Capacity 2,000 pcs/hour
No. of Worker 2 person auto supply
System Controller PLC
Inspection system
Full automatic Vision Camera system
Tip point, Reversed cannula, Cannula Length, Tip
orientation, Bonded condition, Differential pressure
blockage
OthersFeeding only defective Remote real time monitoring
and control
10. Dental Needle Assembly Line
11. IV Infusion set Assembly Line
12. Urine Bag Assembly Line
9. Pen Needle Assembly Line
10 BS Medical company profile company profile BS Medical 11
Address : 320 Hyoja-Ro, Wansan-Gu, Jeonju-Si Jeollabuk-Do, S.Korea
Homepage : www.info-bsm.com
E-mail : [email protected]
Tel : +82-63-908-9933 / Fax : +82-63-908-9932