Besam Automatic Door System - Assa Abloy · Besam Automatic Door System - Sliding Door Operator...
Transcript of Besam Automatic Door System - Assa Abloy · Besam Automatic Door System - Sliding Door Operator...
The base version of the Besam Slim automatic door system is also available in telescopic, break-out, and reverse break-out models.
Besam Automatic Door System- Sliding Door Operator
Slim & Slim ThermoThe system consists of doors, operator, safety units and, if required, side screens and overlights. Available for beam- or wall mounting and supplied as bi-parting and single-sliding, all models can be tailored to individual customer requirements.
Slim Telescopic & Slim Thermo TelescopicTelescopic maximizes the opening width of narrow passages, providing an impressive solution when space is limited.
Slim Break-out and Slim Reverse Break-outSlim Break-out enables the doors and side screens to swing outward in an emergency, allowing exit through the entire door and side-screen space. Slim Reverse Break-out performs the same way with the doors swinging inward.
Sliding Doors www.assaabloyentrance.com
Accessories and OptionsProfile type: - Slim - Slim Thermo
Profile finish: - anodized aluminium, colour on request - painted in colour according to RAL card
Glass type: - 8, 10 or 12 mm laminated - 8, or 10 mm tempered - 22 mm insulated (Slim Thermo profile only)
Glass finish: clear, green, bronze, opaque
Overlight (beam mounted only)
Side screens
Mechanical lock
Safety featuresAn integrated activation and presence detection system enhances safety for users by detecting people or objects in the doorway, preventing the door from closing until it is safe to do so.
SustainabilityBesam’s automatic door systems can reduce the amount of energy needed to heat or cool a building, resulting in lower costs and a smaller carbon footprint for customers. The Besam Slim & Slim Thermo can be fitted with optional extra tight-fitting brushes and additional sensors for fine-tuning opening and closing times, further enhancing its energy-saving capabilities. Regular maintenance helps insure top performance and extends the life of the equipment, reducing its impact on the environment.
543
2
COW
FW/CLO
HFH
1
3
4
25
23 3
X
30SW COW
FW/CL5-10
≤ 8
DW5
1
2 80
60
CO
H19
5
OH
FH
DH
8
5-10
Technical Data Besam SlimThe below measures are formally certified by third party laboratories. For special applications, other sizes can be delivered on request.
Glass Single sliding Single sliding with side screen wall mounted
Single sliding with side screen beam mounted
mm 8 10 12
FHmin 1900 1900 1900
FHmax 3000 3000 3000
FWmin 900 900 900
FWmax 1500 1500 1500
FHmin 1950 1950 1950
FHmax 3000 3000 3000
FWmin 1800 1800 1800
FWmax 3000 3000 3000
FHmin 2100 2100 2100
FHmax 3150 3150 3150
FWmin 1800 1800 1800
FWmax 3000 3000 3000
Glass Bi-parting Bi-parting with side screens wall mounted
Bi-parting with side screens beam mounted
mm 8 10 12
FHmin 1900 1900 1900
FHmax 3000 3000 3000
FWmin 900 900 900
FWmax 3000 2580 2180
FHmin 1950 1950 1950
FHmax 3000 3000 3000
FWmin 1800 1800 1800
FWmax 6000 5300 4500
FHmin 2100 2100 2100
FHmax 3150 3150 3150
FWmin 1800 1800 1800
FWmax 6000 5300 4500
For information about the operator, see UniSlide/SL500 product sheet.
Bi-parting with side screens and overlight, beam mounted
FW = Frame widthFH = Frame heightOH = Overlight heightCL = Cover lengthCOW = Clear opening width
COH = Clear opening heightDW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance
Single sliding without side screen (left opening shown)
Single sliding with side screen and overlight
(left opening shown)
Bi-parting without side screens
543
2
COW
FW/CL
OH
FH1
3
4 5
SW COWFW/CL5-10
35
26 3
X
30
≤ 8
1
2
80
80
CO
H19
5O
HFH
5-10
DH
8
Technical Data Besam Slim ThermoThe below measures are formally certified by third party laboratories. For special applications, other sizes can be delivered on request.
Glass Single sliding Single sliding with side screen wall mounted
Single sliding with side screen beam mounted
mm 6/10/6
FHmin 1900
FHmax 3000
FWmin 900
FWmax 1500
FHmin 1950
FHmax 3000
FWmin 1800
FWmax 3000
FHmin 2100
FHmax 3150
FWmin 1800
FWmax 3000
Glass Bi-parting Bi-parting with side screens wall mounted
Bi-parting with side screens beam mounted
mm 6/10/6
FHmin 1900
FHmax 3000
FWmin 900
FWmax 2130
FHmin 1950
FHmax 3000
FWmin 1800
FWmax 4430
FHmin 2100
FHmax 3150
FWmin 1800
FWmax 4430
For information about the operator, see UniSlide/SL500 product sheet.
Bi-parting with side screens and overlight, beam mounted
FW = Frame widthFH = Frame heightOH = Overlight heightCL = Cover lengthCOW = Clear opening width
COH = Clear opening heightDW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance
Single sliding without side screen (left opening shown)
Single sliding with side screen and overlight
(left opening shown)
Bi-parting without side screens
1
2
100
80
CO
HFH5-
10
DH
8
64 53
2
COW
FW/CL
FH
1
3
4
5
25
23 3
30SW COW
FW/CL5-10
≤ 8
≤ 8
DWDW
X 6
Telescopic bi-parting with side screens, wall mounted
Telescopic bi-parting without side screens
Telescopic single sliding with side screen
(left opening shown)
Telescopic single sliding without side screen
(left opening shown)
FW = Frame widthFH = Frame heightCL = Cover lengthCOW = Clear opening widthCOH = Clear opening height
DW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance
Technical Data Besam Slim TelescopicThe below measures are formally certified by third party laboratories.For special applications, other sizes can be delivered on request.
Glass Single sliding Single sliding with side screen wall mounted
Single sliding with side screen beam mounted
mm 8 10 12
FHmin 1900 1900 1900
FHmax 3000 3000 3000
FWmin 1000 1000 1000
FWmax 2800 2570 2160
FHmin 1950 1950 1950
FHmax 3000 3000 3000
FWmin 1600 1600 1600
FWmax 4800 3920 3310
FHmin 2100 2100 2100
FHmax 3150 3150 3150
FWmin 1600 1600 1600
FWmax 4800 3920 3310
Glass Bi-parting Bi-parting with side screens wall mounted
Bi-parting with side screens beam mounted
mm 8 10 12
FHmin 1900 1900 1900
FHmax 3000 3000 3000
FWmin 1600 1600 1600
FWmax 3600 3600 3420
FHmin 1950 1950 1950
FHmax 3000 3000 3000
FWmin 2800 2800 2800
FWmax 5500 5500 5300
FHmin 2100 2100 2100
FHmax 3150 3150 3150
FWmin 2800 2800 2800
FWmax 5500 5500 5300
For information about the operator, see UniSlide/SL500 product sheet.
1
2
130
80
CO
HFH5-
10
DH
83
4
SW COWFW/CL5-10
DWDW
X
35 30
≤ 8
≤ 8
26 3≤ 8
5 6
64 53
2
COW
FW/CL
FH
1
Telescopic bi-parting with side screens, wall mounted
Telescopic bi-parting without side screens
Telescopic single sliding with side screen
(left opening shown)
Telescopic single sliding without side screen
(left opening shown)
FW = Frame widthFH = Frame heightCL = Cover lengthCOW = Clear opening widthCOH = Clear opening height
DW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance
Technical Data Besam Slim Thermo TelescopicThe below measures are formally certified by third party laboratories. For special applications, other sizes can be delivered on request.
Glass Single sliding 2 sliding doors
Single sliding with side screen wall mounted
Single sliding with side screen beam mounted
mm 6/10/6
FHmin 1900
FHmax 3000
FWmin 1000
FWmax 2130
FHmin 1950
FHmax 3000
FWmin 1600
FWmax 3280
FHmin 2100
FHmax 3150
FWmin 1600
FWmax 3280
Glass Bi-parting 4 sliding doors
Bi-parting with side screens wall mounted
Bi-parting with side screens beam mounted
mm 6/10/6
FHmin 1900
FHmax 3000
FWmin 1600
FWmax 3360
FHmin 1950
FHmax 3000
FWmin 2800
FWmax 5200
FHmin 2100
FHmax 3150
FWmin 2800
FWmax 5200
For information about the operator, see UniSlide/SL500 product sheet.
www.assaabloyentrance.com
CO
HFH5-
10
DH
1276
80
1
2
543
2
1
COWCOP
FW/CL
FW/CL
3
4
5
19SW COW20
FW/CL5-10
3337
23 371DW
X
≤ 8
COW
14FW
1003
786-
EI-5
.0 –
Issu
e 20
13-0
8-16
– R
ight
s res
erve
d fo
r cha
nges
with
out p
rior n
otic
e.©
All
right
s in
and
to th
is m
ater
ial a
re th
e so
le p
rope
rty
of A
SSA
ABLO
Y En
tran
ce S
yste
ms A
B. C
opyi
ng, s
cann
ing,
alte
ratio
ns o
r mod
ifica
tions
are
exp
ress
ly fo
rbid
den
with
out t
he p
rior w
ritte
n co
nsen
t of t
he a
pplic
able
com
pany
with
in A
SSA
ABLO
Y En
tran
ce S
yste
ms A
B.
ASSA ABLOY Entrance Systems
Box 669SE-261 25 [email protected]: +46 10 47 47 000Fax: +46 418 212 50www.besam.com
This equipment should be installed, regularly inspected, maintained and serviced by trained and authorized personnel. Preventive maintenance plans are highly recommended for a proper and safe operation. Talk to your ASSA ABLOY Entrance Systems representative to learn more about our service offering!
Technical Data Besam Slim Break-out Besam Slim Reverse Break-out
The below measures are formally certified by third party laboratories. For special applications, other sizes can be delivered on request.
Slim Break-out Slim Reverse Break-out
Glass Single sliding with side screen wall mounted
Single sliding without side screen wall mounted
mm 8 10 12
FHmin 2000 2000 2000
FHmax 2500 2500 2500
FWmin 1950 1950 1950
FWmax 2670 2530 2530
FHmin 2000 2000 2000
FHmax 2500 2500 2500
FWmin 930 930 930
FWmax 1230 1200 1100
Glass Bi-parting with side screen wall mounted
Bi-parting without side screens wall mounted
mm 8 10 12
FHmin 2000 2000 2000
FHmax 2500 2500 2500
FWmin 2200 2200 2200
FWmax 4400 4400 4400
FHmin 2000 2000 2000
FHmax 2500 2500 2500
FWmin 930 930 930
FWmax 2430 2380 2180
For information about the operator, see UniSlide/SL500 product sheet.
Bi-parting with side screens and break-out, wall mounted
Single sliding with side screen and break-out (left opening shown)
Bi-parting without side screens with reverse break-out
FW = Frame widthFH = Frame heightCL = Cover lengthCOW = Clear opening widthCOP = Clear opening, break-outCOH = Clear opening heightDW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance