Berthing etc-test 1
Transcript of Berthing etc-test 1
. We are going to drop sb anchor.“ ”.
. Drop starboard anchor! 6 shackles must be put in the water.
“ ”.
1
. We are going to heave anchor.
. Start heaving port anchor.
. Anchor is loose from the ground.
. There are 3 shackles left to come in.
. Anchor has been fastened.
“ ”.
“ ”.
“ ”.
“ ”.
“ ”.
2
Ships are made are made fast to by (A), (B), (C) and (D).
A)……... B)……...
D)…..C)….. C)…..
. We are going to berth on port side.“ .”
. Fasten the lines forward and aft.
“ ”.. Keep tension on the springs.
“ ”.
To prevent the h or s from being fouled, the line is led through a .
3
When the vessel is due to leave,c orders are given bythe pilot or by the mate.
6
3
When leaving berth the first orders are:
“ !: ”.
7
s
Casting off the headline:
s
8
“ the headline!”
“ the headline!”
3
Write down the standard casting-off orderwhen you let go all but the essential lines:
9
““
3
Write down the standard casting-off orderswhen you let go your headline:
10
“ “
Write down the standard casting-off orderswhen you let go your fore spring:
11
““
3
Write down the standard casting-off orderswhen you let go your aft spring and breastline:
12
““
““
3
Write down the standard casting-off orderswhen you let go your sternline:
13
“ “
“Propeller ; starboard fifteen - ahead!”
“M , slow ahead!”
“Half ahead; s ”
sound
The helmorder “ ” is given to reduce the amount of rudder and hold.
After an alteration of course the helm order “ ”is given to reduce the vessel’s swing rapidly.
The helmorder “ !” is given stop the swing of the vessel’s head in a turn