Bell Gossett Snap Zone Valves Mean EZ Maintenance · Control the water temperature in your hot...
Transcript of Bell Gossett Snap Zone Valves Mean EZ Maintenance · Control the water temperature in your hot...
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ [email protected]
117
Bell Gossett Snap Zone Valves Mean EZ Maintenance
Snap Zone Valves for Commercial & Residential Applications
Bell & Gossett Snap Zone® valves are precision engineered four-wire thermoelectrically operated valves designed for heating and cooling systems. The valve opens and closes based upon the voltages applied to the actuator. Use the Bell & Gossett Snap Zone Valves to speed installation time and reduce callback times to customers. The actuator can be installed or removed at any angle on the adapter ring. The compact design and universality in the actuator mounting position allows for easy installation in the most difficult positions.
Operating Data: ■Working temperature range: 32 to 212 F■Maximum Working Pressure: 240 psi■Maximum pressure differential close-off: 60 psi■Glycol compatibility: 50/50 mixture■ Shutoff and opening speed: 3 minutes■ Electrical rating: 24 volts; End Switch: 1.0A @ 24VAC
Features: ■ Soft-close technology to suppress water hammer■ Silent actuator operation and Visual Indicator■One-handed and 360° actuator installation■ Valve in-pipe serviceable: internal components can be■ removed without having to remove unit from the system.
Materials of Construction: ■Actuator - Polyamide housing and PVC cable.■Valve - Brass body, stainless steel stem and spring,EPDM plunger seat and O-rings, brass tailpiece and unionnuts and brass bonnet/packing box.
Model No.
Product Code
Size inches
Cv Rate Style Description
Dimensions (inches) Ship Wgt. (lbs)
Order No. D X Y Z
SZV-050S-4WE 109500 ½ 1.8 Sweat
Connect
½” sweat zone valve, 4-wire ES 1.59 3.48
3.55
4.24
1.4
BI1650
SZV-075S-4WE 109501 ¾ 2.8 ¾” sweat zone valve, 4-wire ES 2.02 4.28 4.42 BI1651
SZV-100S-4WE 109502 1 2.8 1” sweat zone valve, 4-wire ES 2.24 4.28 4.52 BI1652
SZV-050N-4WE 109506 ½ 1.8 NPT Pipe
Connect
½” NPT zone valve, 4-wire ES 1.59 3.58 4.24 BI1653
SZV-075N-4WE 109507 ¾ 2.8 ¾” NPT zone valve, 4-wire ES 2.02 4.18 4.42 BI1654
SZV-100N-4WE 109508 1 2.8 1” NPT zone valve, 4-wire ES 2.24 4.44 4.52 BI1655
SZV-050S-000 109512 ½ 1.8
Repair Parts
½” sweat zone valve body only 1.59 3.48 — —
1.0
BG2240
SZV-075S-000 109513 ¾ 2.8 ¾” sweat zone valve body only 2.02 4.28 — — BG2240A
SZV-100S-000 109514 1 2.8 1” sweat zone valve body only 2.24 4.28 — — BG2240C
SZV-050N-000 109515 ½ 1.8 ½” NPT zone valve body only 1.59 3.58 — — BG2241
SZV-075N-000 109516 ¾ 2.8 ¾” NPT zone valve body only 2.02 4.18 — — BG2241A
SZV-100N-000 109517 1 2.8 1” NPT zone valve body only 2.24 4.44 — — BG2241C
SZV-000-4WE 109518 — — 0.4 BI1007 Actuator, 4-wire operator with end switch for all valves
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ [email protected]
118
Bell & Gossett Zone Control Valves
Comfort-Trol 24-Volt Zone Control Valves
Control the water temperature in your hot water heating or chilled water zones with this compact, silent-operating, heat motor actuated zone control valve. The 24 volt, 50/60 hertz, 3-wire Comfort-Trol zone valve is used for either continuous or intermittent cycling operation of your system’s pump.
The valve design permits easy replacement of the seal gland without isolating the valve or draining the system. Replacement of the heat motor and power-pill generally mean years of additional usage.
Model No.
B&G No.
Pipe Size and Connection
Dimensions (inches) Ship Weight (lbs)
Order No. A B C D E F
CTS-7524 109017 3/4” sweat 3 1-1/2 — — — 1
CTF-10024
— 1/2” flare
2-5/8 1-5/16
3/8 5-3/8 4-3/8 1/2 1.2
— 3/4” flare 1/2 6-1/4 4-3/4 3/4 1.2
— 1” flare 5/8 7 5-3/16 29/32 1.2
Discontinued Repair Parts
available. See next page.
■THERMOSTAT Requirements: 24 volt systems. 24-volt, two-wire with a 0.6 ampere heat anticipator setting. The heat anticipatorsetting must match the 0.6 amp rating of the power-pill heater.
■TRANSFORMER: 24-volt systems. 115/24 volt rated at 40 VA fora maximum of three Comfort-Trol zone valves per transformer.
■DESIGN LIMITS: Maximum working pressure to 125 psig. Fluidtemperature range from 40° F to 240° F. Maximum ambient(surrounding air) temperature to 125° F. Maximum differentialpressure (difference between the pressure on the valve inlet versusoutlet): 35 psig.
■ LOCATION: The Comfort-Trol valve can be installed either hori-zontally or vertically. Precautions: When installing the valve in avertical position, the electrical connections should be at the top ofthe operator. On chilled water applications the operation should beabove the pipe centerline. If the valves are installed near the boiler,keep them away from any direct boiler or piping heat.
Performance Characteristics
Dimensional Diagram
DISCONTINUEDRepair Parts on Following Page.
Shown here for historical reference
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ [email protected]
119
Repair Parts for Obsolete Zone Control Valves
Item No. B&G No. Description Order
No.
1 189143 Heat motor kit BG1455
2 189060 Seal & seat assembly BG1445
Item No. B&G No. Description Order
No.
1 109024 Operator BI1005
2 189139 Bonnet & retainer assembly BG1463B
3 V01340 Cover BG7500
4 189137 Heat motor assembly BG1463
5 189138 Gland assembly BG1463A
Repair Parts for Obsolete Modumate Valve
All Parts now discontinued and no longer available.
Repair Note: The replacement operator for this obsolete Comfort-Trol valve will not fit on the obsolete Modumate valve shown in the adjoining column.
OBSOLETE
Modumate & Comfort-Trol Zone Control Valve Repair Parts
Both models are now obsolete
Repair Parts for Comfort-Trol ValveAll Parts now discontinued and no longer available.
Repair part information displayed here only for historical reference.