BEGA - Flyer Railway 2 - V10 - Bega Special Tools - Flyer... | +31 578 - 668000 | [email protected] |...
Transcript of BEGA - Flyer Railway 2 - V10 - Bega Special Tools - Flyer... | +31 578 - 668000 | [email protected] |...
maintenance equipment for workshopssteel industry, rolling mills
www.begaspecialtools.com | +31 578 - 668000 | [email protected] | The Netherlands
efficient maintenance, the right equipment for the job, process optimisation, safe and easy to use
workshop equipment
www.begaspecialtools.com | +31 578 - 668000 | [email protected] | The Netherlands
induction heatersbearings, couplings, wheels, gears, etc...
hydraulic pullers4-50 ton capacity
handy pump and spreader/liftersets in case, 700 bar
industrial hydraulic equipmentelectric pumps, cylinders, 700 bar
self centering
GB
BeteX mf quick-heater 44kw
BeteX hXpm 50t
Induction heaters for mounting & dismountingFor bearings, labyrinth rings, bearing rings (NU, NJ), sleeves, bushes, couplings, gears, wheels, wheel rings, etc.
Middle frequency induction heating is a safe and effective heating method, which improves the quality of installation or maintenance. This method is fast, simple and energy efficient, compared to conventional methods.
Using the BETEX MF Quick-Heater, parts can be heated in a clean, controlled and even manner. This avoids damage or contamination. Depending on the application, you can use fixed or flexible inductors. Flexible inductors can be wound around, or in a component. As a result, many applications are possible. The heater is easy to transport and can be moved to where needed on site.
www.begaspecialtools.com | +31 578 - 668000 | [email protected] | The Netherlands www.begaspecialtools.com | +31 578 - 668000 | [email protected] | The Netherlands
BeteX mf quick-heater 22kw
BeteX hXpm 100t BeteX hXpm 150t
application examples inSteel industry | Mining | Paper & Printing Service and Repair sector | Wind power
Rail & Metro | Machine building
Mobile Hydraulic PullersSelf-centering 2/3 arm pullers, 50 - 100 - 150 tons capacity.For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.
The pullers are self-centering, easy to maneuver and adjustable in height. Arms slide inwards or outwards simultaneously. Convert to 2-arm or 3-arm puller.
The harder the force, the tighter the jaws grip. The arms cannot bend or deflect. The integral safety release valve prevents overloading and ensures that you will never exceed the maximum power capacity.
HXPM 50t 2/3 arm HXPM 100T 2/3 arm HXPM 150T
Max spread 1250mm 1500mm 1600mm
Max shaft length 780mm 1215mm 1150mm
Max stroke 330mm 270mm 325mm