Becker Thermoforming Vacuum Pumps Yield Better … · Becker Thermoforming Vacuum Pumps Yield...
1
Becker Thermoforming Vacuum Pumps Yield Better Formed Parts. While it may appear that all oil-flooded vacuum pumps produce good vacuum, there’s a world of difference. A Becker pump will pull a vacuum on a given receiver volume from, say, 20 in.Hg to 29 in.Hg in about 25% less time than the pump you are probably using now. Or, it means that, for a s s given length of time, you will be able to pull a deeper vacuum in your receiver, which corresponds to a better vacuum equalization level, and better parts. This is only one of the reasons we can say that using Becker pumps can improve your capability and let you make better parts. There are many others. Let us tell you more. Call us today. That’s quite a statement, considering all the brands and types of pumps that are available. How can we say that? The best formed parts are those that are drawn down quickly, before the plastic has a chance to cool. You will get less thinning in the corners and on deep drawn parts with higher and faster vacuum. That’s where Becker comes in. The efficiency of a vacuum pump has a direct relationship on the vacuum level in the receiver, and on the recovery time; and Becker pumps have higher efficiency than other pumps currently being used. Becker Pumps Corp. • 100 East Ascot Lane • Cuyahoga Falls, Ohio 44223-3768 Ph. (330) 928-9966 • FAX: (330) 928-7065 • e-mail: [email protected] • beckerpumps.com • Cooler Running • Lower Noise levels • Easiest to Service • 2-Year Warranty • Uses Less Horsepower • Semi-Synthetic Oil is Standard • Better Pricing • Better Loooking, too! Becker U4.70SA Oil Flooded Vacuum Pump
Transcript of Becker Thermoforming Vacuum Pumps Yield Better … · Becker Thermoforming Vacuum Pumps Yield...
Becker Thermoforming Vacuum PumpsYield Better Formed Parts.
While it may appear that all oil-fl ooded vacuum pumps produce good vacuum, there’s a world of difference. A Becker pump will pull a vacuum on a given receiver volume from, say, 20 in.Hg to 29 in.Hg in about 25% less time than the pump you are probably using now. Or, it means that, for a less time than the pump you are probably using now. Or, it means that, for a lessgiven length of time, you will be able to pull a deeper vacuum in your receiver, which corresponds to a better vacuum equalization level, and better parts. This is only one of the reasons we can say that using Becker pumps can improve your capability and let you make better parts. There are many others. Let us tell you more. Call us today.
That’s quite a statement, considering all the brands and types of pumps that are available. How can we say that? The best formed parts are those that are drawn down quickly, before the plastic has a chance to cool. You will get less thinning in the corners and on deep drawn parts with higher and faster vacuum. That’s where Becker comes in. The effi ciency of a vacuum pump has a direct relationship on the vacuum level in the receiver, and on the recovery time; and Becker pumps have higher effi ciency than other pumps currently being used.
Becker Pumps Corp. • 100 East Ascot Lane • Cuyahoga Falls, Ohio 44223-3768Ph. (330) 928-9966 • FAX: (330) 928-7065 • e-mail: [email protected] • beckerpumps.com
• Cooler Running
• Lower Noise levels
• Easiest to Service
• 2-Year Warranty
• Uses Less Horsepower
• Semi-Synthetic Oil is Standard
• Better Pricing
• Better Loooking, too!
Becker U4.70SA Oil Flooded Vacuum Pump
