Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

22
Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006

Transcript of Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Page 1: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Beamline 8.3.2 Radiation ShieldingBeamline Design Review

17 April, 2006

Page 2: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Background

• Radiation leak discovered during annual white-light survey

• Surgical inspection revealed that:– Lead had shifted slightly– Corner section was not built

to specification

• Actions taken:– All lead lined hutches are to

be inspected and reviewed– All lead lined hutches moved

to Pre-Commissioned status

Page 3: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Shielding Inspection Criteria

• Verify that lead shielding is either:– Contiguous– Properly overlapped

• Ensure that shielding is secure and will not move

• Document and Archive

Page 4: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Shielding Defining Process

• Determine types of panels and shielding– Exploratory surgery– Compare to mfg drawings

• Develop repair plan:– Procedure for panel repair– Process for documentation

Page 5: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Shielding panel types

• Three types of shielding panels on the hutch:

–Structural (S)–Non-Structural (NS)–Corners (C)

• Additional regions–Doors–Support Structure over door

X-rays

PLAN VIEW

S

NS

C

NSNS

NSNS

NS

C

CC

S

S

James Nasiatka
Need a clean version of this drawing
Page 6: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Shielding Repair Approach

• Documentation– Generate tracking methods for each panel– Record panel information and repairs– Archive documents, drawings and photos.

• Three basic shielding repair “actions” to hutch panels:

– Skinning (structural & corners)– Securing (non-structural & doors)– Surveying (roof, H – panels, labyrinths)

Page 7: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

8.3.2 Shielding Documentation

• Documentation note– Includes explanation– Defines numbering

system for panels and references drawing

– Provides repair forms for each panel

– Will serve to record repairs with forms and photos.

James Nasiatka
Insert Picture showing numbering of panels
Page 8: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Skinning” Example documentation

• Corner Panels– Fill out inspection sheet

– Photograph lead

– Re-skin with 5mm lead

– Cover with steel

Page 9: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Skinning” Example documentation 2

• Door Support Structure– Fill out inspection sheet

– Re-skin with 5mm lead

– Photograph before install

– Cover with steel

Page 10: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Securing” repair process

• Non Structural Panels– Inspect Lead– Photograph

• Overall Picture• Quadrants

– Install Support Bar– Install Cover Plate

Page 11: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Securing” Inspection

A

B

C

D

Page 12: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Securing” Support bar

Page 13: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Securing” Assembly view

Page 14: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Securing” Attachment view

Page 15: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Securing” Example Documentation 2

• Doors– Remove doors – Cut into and Inspect lead– Photograph– Install Support Bars – Install Cover Plate– Re-install doors

Page 16: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Surveying” Repair process

• Survey panels– Roof panels– H - panels– Labyrinths

• Survey Process– Inspect panels– Perform commissioning

survey per procedure– Complete forms

James Nasiatka
Need 3-D/Isometric view of Roof Cover Plate.Should be partial cutaway to show lead/steel
Page 17: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Surveying” Commissioning checklist

Page 18: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

“Surveying” Example documentation

• Roof panels– Inspect panels– Perform commissioning

survey per procedure– Complete forms

James Nasiatka
Need 3-D/Isometric view of Roof Cover Plate.Should be partial cutaway to show lead/steel
Page 19: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Open issues…..

• Complete documentation note with deails, process for repair and drawings for each panel on hutch

• Review of Commissioning radiation survey procedure – All concerns must be addressed regarding actual

process.

• Structural Calculations– INC is reviewing hutch design with added lead– If additional structure is needed a design could be

added to the corners

James Nasiatka
Need Picture of Labyrinth
Page 20: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Plan of Attack

• Immediate Actions:–Non-Structural Panels

• Inspect/Repair/Secure–Doors

• Remove• Inspect/Repair/Secure

–Labyrinths• Remove/Inspect

–Roof Cover Plates• Fabricate Lead• Inspect/Install

– Inspect C-Channels on Joining Plates

• Near Term Actions–Structural Calculations–Re-Skin

• Structural Panels• Door Support

Structure• Corners

• During Re-Commissioning–Verify H-Channels on

Joining Plates–Survey All Panels

Page 21: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Questions?

Page 22: Beamline 8.3.2 Radiation Shielding Beamline Design Review 17 April, 2006.

Panels to be “Skinned”