>BB< Flex PE-RT / AL / PE-RT compuesto por 5 capas solapadas combina las ventajas del tubo metálico...
2
• El tubo >B< Flex PE-RT / AL / PE-RT compuesto por 5 capas solapadas combina las ventajas del tubo metálico y el tubo plástico y elimina las desventajas de ambos productos al mis- mo tiempo. • Tanto su capa interior como la exterior ofrecen una especial resistencia a los productos químicos, a la corrosión y a la con- taminación. • La capa de aluminio le hace 100% resistente al paso de gases y oxígeno • Tubo en rollos disponible en medidas de 16 a 32mm y en ba- rras en medidas de 16 a 75mm. • Rango de temperaturas de -40ªC hasta 95ºC • Accesorios fabricados partiendo de barra de latón cortada en frío y forjada en caliente que le confieren una estructura y dise- ño compacto. • Tratamiento superficial que le dota de una gran resistencia a la corrosión. • Sistema fabricado de acuerdo la norma UNE-EN ISO 21003 • Casquillo de acero inoxidable que se acopla perfectamente a nuestro perfil >B< • La larga vida útil del sistema está garantizada gracias a la per- fecta estanqueidad de tubo y accesorio. • Herramientas especialmente diseñadas para conseguir unas uniones fáciles, rápidas y seguras. • Certificado AENOR Nº. 001/006001 para el sistema. Ventajas y Aplicaciones Sistema Multicapa de tubo y accesorios prensados metálicos para múltiples aplicaciones. >B<Flex AENOR
Transcript of >BB< Flex PE-RT / AL / PE-RT compuesto por 5 capas solapadas combina las ventajas del tubo metálico...
• Eltubo>B<FlexPE-RT/AL/PE-RTcompuestopor5capassolapadas combina las ventajas del tubo metálico y el tuboplásticoyeliminalasdesventajasdeambosproductosalmis-motiempo.
• Tantosucapa interiorcomo laexteriorofrecenunaespecialresistenciaalosproductosquímicos,alacorrosiónyalacon-taminación.
• Lacapadealuminiolehace100%resistentealpasodegasesyoxígeno
• Tuboenrollosdisponibleenmedidasde16a32mmyenba-rrasenmedidasde16a75mm.
• Rangodetemperaturasde-40ªChasta95ºC
• Accesoriosfabricadospartiendodebarradelatóncortadaenfríoyforjadaencalientequeleconfierenunaestructuraydise-ñocompacto.
• Tratamientosuperficialqueledotadeunagranresistenciaalacorrosión.
• SistemafabricadodeacuerdolanormaUNE-ENISO21003
• Casquillodeaceroinoxidablequeseacoplaperfectamenteanuestroperfil>B<
• Lalargavidaútildelsistemaestágarantizadagraciasalaper-fectaestanqueidaddetuboyaccesorio.
• Herramientasespecialmentediseñadaspara conseguir unasunionesfáciles,rápidasyseguras.
• CertificadoAENORNº.001/006001paraelsistema.
Ventajas y Aplicaciones
SistemaMulticapadetuboyaccesoriosprensadosmetálicosparamúltiplesaplicaciones.
>B<Flex
AENOR
Push-FitGama >B<Press Carbon con indicador de fugas
>B< Press Carbon
Manguito con rosca H
PC4270GFrom: 12mm x 1/2"To: 28mm x 1"
Manguito con rosca M
PC4273GFrom: 12mm x 3/8"To: 54mm x 2"
Manguito deslizante
PC4275From: 12mmTo: 108mm
Reducción MH
PC5243From: 15 x 12mmTo: 108 x 76mm
Curva con rosca M
PC4001GFrom: 12mm x 3/8"To: 54mm x 2"
Curva con rosca H
PC4002GFrom: 15mm x 1/2"To: 28mm x 1"
Curva 90º MH
PC5001From: 12mmTo: 108mm
Bend
PC5002From: 15mmTo: 108mm
Curva 45º HH
PC5041From: 12mmTo: 108mm
CSalto MM corto
PC5087From: 15mmTo: 28mm
Tee with FemaleThreaded Branch
PC4130From: 15 x 15 x 1/2"To: 108 x 108 x 3/4"
Te Recta
PC5130From: 12mmTo: 108mm
Tapón H
PC5301From: 15mmTo: 108mm
Straight Coupler
PC5270From: 15mmTo: 108mm
Codo 90º MH
PC5030From: 15mmTo: 54mm
Flange
PC5270FFrom: 76mmTo: 108mm
Codo con rosca H
PC4090GFrom: 15mm x 1/2"To: 28mm x 1"
Curva 45º MH
PC5040From: 12mmTo: 108mm
• Fabricados en acero.
• Junta tórica especialmente diseñada para >B< Press Carbon, indicada para aplicacions de agua fría y caliente.
• Disponible en medidas de 12 a 108mm.
• Tubo del sistema >B< Press Carbon disponible de acuerdo a la norma EN-10305-3
• Resistencia a la corrosión gracias a 7-15µm de galvanizado.
• Diseñado para agua hidrostática hasta 16 bar de presión.
• Diseñado para rangos de temperatura de -35°C to 110°C.
• Totalmente probado a 40 bar.
• Sistema disponible con tubo certificado >B< Carbon. Sistema garantizado por 10 años.
• Accesorios garantizados por 5 años siempre que sigan las recomendaciones de la EN 10305-3.
*Los productos Conex|Bänninger estan Aprobados y Certificados por numerosos Standards. Para mas información sobre esta gama por favor contacte con nuestro departamento técnico en [email protected]
IBP Atcosa, S.L. Polígono Industrial Quintos-Aeropuerto s/n. 14005 Córdoba - EspañaTel: +34 (09)57 469629 | Fax: +34 (9)57 469632 | Email: [email protected] | Website: www.ibpatcosa.com y www.ibpgroup.com
AENOR
Gama >B<Press Carbon con indicador de fugas
>B< Press Carbon
Manguito con rosca H
PC4270GFrom: 12mm x 1/2"To: 28mm x 1"
Manguito con rosca M
PC4273GFrom: 12mm x 3/8"To: 54mm x 2"
Manguito deslizante
PC4275From: 12mmTo: 108mm
Reducción MH
PC5243From: 15 x 12mmTo: 108 x 76mm
Curva con rosca M
PC4001GFrom: 12mm x 3/8"To: 54mm x 2"
Curva con rosca H
PC4002GFrom: 15mm x 1/2"To: 28mm x 1"
Curva 90º MH
PC5001From: 12mmTo: 108mm
Bend
PC5002From: 15mmTo: 108mm
Curva 45º HH
PC5041From: 12mmTo: 108mm
CSalto MM corto
PC5087From: 15mmTo: 28mm
Tee with FemaleThreaded Branch
PC4130From: 15 x 15 x 1/2"To: 108 x 108 x 3/4"
Te Recta
PC5130From: 12mmTo: 108mm
Tapón H
PC5301From: 15mmTo: 108mm
Straight Coupler
PC5270From: 15mmTo: 108mm
Codo 90º MH
PC5030From: 15mmTo: 54mm
Flange
PC5270FFrom: 76mmTo: 108mm
Codo con rosca H
PC4090GFrom: 15mm x 1/2"To: 28mm x 1"
Curva 45º MH
PC5040From: 12mmTo: 108mm
• Fabricados en acero.
• Junta tórica especialmente diseñada para >B< Press Carbon, indicada para aplicacions de agua fría y caliente.
• Disponible en medidas de 12 a 108mm.
• Tubo del sistema >B< Press Carbon disponible de acuerdo a la norma EN-10305-3
• Resistencia a la corrosión gracias a 7-15µm de galvanizado.
• Diseñado para agua hidrostática hasta 16 bar de presión.
• Diseñado para rangos de temperatura de -35°C to 110°C.
• Totalmente probado a 40 bar.
• Sistema disponible con tubo certificado >B< Carbon. Sistema garantizado por 10 años.
• Accesorios garantizados por 5 años siempre que sigan las recomendaciones de la EN 10305-3.
*Los productos Conex|Bänninger estan Aprobados y Certificados por numerosos Standards. Para mas información sobre esta gama por favor contacte con nuestro departamento técnico en [email protected]
IBP Atcosa, S.L. Polígono Industrial Quintos-Aeropuerto s/n. 14005 Córdoba - EspañaTel: +34 (09)57 469629 | Fax: +34 (9)57 469632 | Email: [email protected] | Website: www.ibpatcosa.com y www.ibpgroup.com
Gama>B<Flex
>B<FlexPush-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tubo PERT / Al / PERTen rollos
De: 16/2mmA: 32/3mm
1041
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tubo PERT / Al / PERT en tiras
De: 16/2mmA: 75/7,5mm
1041
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Codo 90° M
De: 16X1/2”A: 50X1.1/2”
P7092G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Te igual HHH
De: 16mmA: 75mm
P7130
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Te igual reducida
De: 16x20x16mmA: 50x40x50mm
P7130R
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Te con rosca H
De: 16x1/2”A: 63x2”
P7130G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Te con rosca M
De: 16x1/2”A: 32x3/4”
P7132G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Manguito H
De: 16x1/2”A: 63x2”
P7240G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Manguito reducido H
De: 18x16mmA: 75x63mm
P7241
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Manguito M
De: 16x1/2”A: 63x2”
P7243G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Manguito recto
De: 16mmA: 75mm
P7270
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tapón H
De: 16mmA: 32mm
P7301
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Racor móvil con junta plana
De: 16x1/2”A: 32x1”
P7359G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Codo placa
De: 16x1/2”A: 25x3/4”
P7472G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Codo para radiador
De: 16mmA: 20mm
P7373
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Te para radiador
De: 16mmA: 20mm
P7374
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Adaptador compresión a tubo de cobre
De: 16X15CuA: 25x22Cu
P7372
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Válvula de esfera
De: 16mmA: 32mm
P1204
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Cuerpo de la válvula
De: 16mmA: 32mm
P1204C
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Embellecedores y cierres
P1205-6-7
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Colector niquelado
De: 3/4”x1/2”2-3-4A: 1”x1/2”2-3-4
P7133
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Conector para tubo multicapa
De: 16x1/2”A: 20x3/4”
P7270G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Casquillo
De: 16mmA: 32mm
P7500
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tubo PEX en rollos
De: 16/2mmA: 32/3mm
1021
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tubo pre aislado en rollos
De: 16/2mmA: 25/2,5mm
1043
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Codo 90°
De: 16mmA: 75mm
P7090
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Codo 90° H
De: 16X1/2”A: 50X1.1/2”
P7090G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Junta porta casquillo
De: 16mmA: 32mm
P7550
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tapón H niquelado
De: 3/4”A: 1”
P7501G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Placa de fijación con codos
De:16x1/2”100y150mmA:20x1/2”100y150mm
P7976G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tapón M niquelado
De: 3/4”A: 1”
P7595G
Push-Fit Range
Push-FitReduced Connector
240From: 15 x 10mmTo: 22 x 15mm
Fitting Reducer
243From: 15 x 10mmTo: 28 x 22mm
Elbow
090From: 10mmTo: 28mm
Street Elbow
001From: 15mmTo: 28mm
Straight FemaleConnector
270GFrom: 15 x 1/2"To: 28 x 1"
Straight Male Connector
243GFrom: 15 x 1/2"To: 28 x 1"
Straight Tap Connector
240GFrom: 15 x 1/2"To: 22 x 3/4"
Bent Tap Connector
002G
Size: 15 x 1/2"
Wall Plate Elbow
472G
Size: 15 x 1/2"
Tank Connector
350From: 15 x 1/2"To: 28 x 1"
Equal Tee
130EQFrom: 10mmTo: 28mm
Reduced Branch Tee
130RBFrom: 22 x 22 x 15mmTo: 28 x 28 x 22mm
Reduced End Tee
130RESize: 15 x 10 x 15mmTo: 28 x 22 x 28mm
Reduced End & Branch Tee
130REBSize: 22 x 15 x 15mmTo: 28 x 22 x 22mm
Female Branch Tee
130G
Size: 15 x 15 x 1/2"
Stop End
301From: 10mmTo: 28mm
Release Tool & Head Pack
CP-FSET002 Size:10,15,22 & 28mmhead units & case
Tool (excluding heads)
CP-FPLIER
Tool (no heads)
Tool Heads
CP-FPLIERFrom: 10mmTo: 28mm
Internal Liners(for plastic pipes)
PPFrom: 10mmTo: 28mm
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
07/12
Tubo PEX / AL / PEX en tiras y rollos
De: 16/2mmA: 32/3mm
1045
04-2
014
