Th. S. Bauer - NIKHEF Thomas S. Bauer - NIKHEF. Th. S. Bauer - NIKHEF Thomas S. Bauer - NIKHEF.
BAUER GROUP LTD - Solar Street Lamps Installation
-
Upload
bauer-hellas-ltd -
Category
Documents
-
view
216 -
download
0
description
Transcript of BAUER GROUP LTD - Solar Street Lamps Installation
< 1 >
Brief Introduction
of LED Solar Street Lamp
June 2008
< 2 >
Contents.
I. Overview of process --------- 3
II. Details of steps -------------- 4
III. Completed view ------------- 9
< 3 >
I. Overview of process
Installation of Concrete BaseInstallation of Concrete Base
Installation of PoleInstallation of Pole
Installation of Rotation ApparatusInstallation of Rotation Apparatus
Installation of Lamp setInstallation of Lamp set
Installation of Control BoxInstallation of Control Box
Connecting Control Box with power lineConnecting Control Box with power line
Note) Above process is general process of solar lamp and South Korea.
So some modification and change could be happened in case of other lamp & countries.
StepStep--11
StepStep--22
StepStep--33
StepStep--44
StepStep--55
StepStep--66
< 4 >
II. Details of steps
▣▣▣▣ Install concrete base on the road or designated spot like drawings above.
Note) Numbers specified above are the case of Korea so it may differ in other countries and rules.
( Side View) ( Top View)
▣▣▣▣ STEP-1. Installation of Concrete Base
< 5 >
1) Install metal pole on concrete base.
It is recommended to set ‘Hole for system electric line’ facing sidewalk.
2) Fasten metal pole to concrete base with nut.
For more secure fastening, metal plate will be inserted between pole and concrete base.
( Side View) ( Top View)
▣▣▣▣ STEP-2. Installation of Pole (Stainless Steel or Steel with color painting)
II. Details of steps
< 6 >
▣▣▣▣ Install rotational apparatus onto electric pole.All electric power lines from rotational apparatus need to be put inside of electric pole.
II. Details of steps
▣▣▣▣ STEP-3. Installation of Rotation Apparatus with Solar Panel
< 7 >
▣▣▣▣ Install LED lamp and arm to the pole.All electric power lines from the lamp need to be put inside of metal pole.
II. Details of steps
▣▣▣▣ STEP-4. Installation of LED lamp set(30W/45W/70W) with Pole
< 8 >
▣▣▣▣ Install control box to the pole
II. Details of steps
▣▣▣▣ STEP-5. Installation of main control box include battery
▣▣▣▣ STEP-6. Connecting control box with power line
< 9 >
III. Completed View