Basic In and Out UC500 with quescom · Web viewUC560 Configuration: CCA Config 1 Configure SIP...
Transcript of Basic In and Out UC500 with quescom · Web viewUC560 Configuration: CCA Config 1 Configure SIP...
Basic In and Out UC500 with quescom
Basic In and Out UC500 with quescom
Quescom Service Config
Services
Outbound
Inbound
Objects>Foreign Gatekeeper
UC560 Configuration: CCA Config
1 Configure SIP Trunk
2 Config Telephony>Dial Plan>Outgoing Use the priority to set order and strip access code
Config Telephony>Dial Plan>Outgoing Set the outgoing CLI on the sip trunk to the extension number
Telephoney>Dial Plan> Incoming DDI to get from sip trunk to extension
Cut through Caller Configuration
Basically the UC500 stays the same, the services change on the quescom
1 add the users cli into the database
2 outgoing service split to go to quescom then gsm so can store the last caller info
3 incoming service changed to add the last caller
Call From uc560 to the quescom to add the last caller info to the table
Now Take the call from the quescom to the gsm slot
Now just change the ocalled number type to route the call to the cli stored in the cut through table