Base Mapping and Geomatic Services ISO 9001:2000 Slide 1 Base Mapping and Geomatic Services Branch...
-
Upload
charla-parrish -
Category
Documents
-
view
225 -
download
0
description
Transcript of Base Mapping and Geomatic Services ISO 9001:2000 Slide 1 Base Mapping and Geomatic Services Branch...
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 1Base Mapping and Geomatic Services Branch
Presented byPaul Quackenbush
Base Mapping and Geomatic ServicesIntegrated Land Management Bureau
Government of British ColumbiaVictoria, B.C.
Canada
DEVELOPINGDEVELOPINGSPECIFICATIONSSPECIFICATIONS
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 2Base Mapping and Geomatic Services Branch
PRESENTATIONPRESENTATIONCONTENTCONTENT
Part I – Base Mapping and Geomatic Services (BMGS)
Role of BMGSBase Mapping ProductsGovernance Model for BMGSFunctional ModelBMGS Strategic Goals
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 3Base Mapping and Geomatic Services Branch
ROLE OF BMGSROLE OF BMGS
Stewards of Base Map data Responsible for Geodetic framework Sets standards and specifications for
geospatial data Business model changing from hands-on
to oversight Client service focus
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 4Base Mapping and Geomatic Services Branchhttp://ilmbwww.gov.bc.ca/bmgs/pba/trim/specs
BASE MAPPING PRODUCTSBASE MAPPING PRODUCTShttp://ilmbwww.gov.bc.ca/bmgshttp://ilmbwww.gov.bc.ca/bmgs
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 5Base Mapping and Geomatic Services Branch
GOVERNANCE MODELGOVERNANCE MODEL
Assistant Deputy Minister responsible for
Corporate Resource Information Management
BMGS Users,
Clients, and
Partners
Base Mapping & Geomatic
Services BranchSources of Input:
Geomatics Experts,Consultants,Clients, and
Others
ProvincialBase Mapping
Advisory Committee(PBMAC)
Communitiesof Practice
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 6Base Mapping and Geomatic Services Branch
FUNCTIONAL MODELFUNCTIONAL MODEL
Inventory
Digital Elevation ModelPlace NamesPlanimetry
(Roads/Rivers / Lakes / Coastline)
Air photosRectified Imagery
Business Processes
Data exchange arrangements
Cost Recovery - Mountain Pine Beetle (MPB)
Forest for Tomorrow (FFT)
As Built Roads (ABR) & Electronic Petroleum Application Spatial
Submission (EPASS)
TechnologySatellite – Eye in the Sky Global
Positioning System (GPS)
Light Detection and Ranging (LIDAR)
Digital Camera
InfrastructureTRIM database
BC Active Control System
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 7Base Mapping and Geomatic Services Branch
BMGS STRATEGIC GOALSBMGS STRATEGIC GOALS
1. Clients achieve their objectives through convenient access to integrated information
2. Clients receive base mapping that meets their needs in terms of core features and update cycles
3. Further the use and integration of provincial base mapping in all sectors of the economy
4. Clients engage BMGS as a Center of Excellence for geomatic technology
Development of Specifications and the Community of Practice responds to goals through:
working with stakeholders to identify business requirements & strategies
piloting update processevaluating resultsmaking proposals for changes
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 8Base Mapping and Geomatic Services Branch
PRESENTATIONPRESENTATIONCONTENTCONTENT
Part II – Specifications Development
Areas of activityWhy were specifications requiredWhat was required in the specification contentApproach used for development of specificationsWhere Base Mapping and Geomatic Services is atNext steps
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 9Base Mapping and Geomatic Services Branch
AREAS OF ACTIVITYAREAS OF ACTIVITY
Medium Format Digital cameras LiDAR Aerial Triangulation (A/T) Orthophotos
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 10Base Mapping and Geomatic Services Branch
SPECIFICATIONS – Please !SPECIFICATIONS – Please !
Why were specifications required? New, emerging technologies were seen as viable
toolsMedium format digital camerasLiDARSoft copy A/T, auto correlation and INS/IMU
Clients wanted faster end to end turn around Promising tools but technical issues BMGS – needed to establish leadership to avoid
random adoption
Change focus to results as opposed to prescriptive process
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 11Base Mapping and Geomatic Services Branch
SPECIFICATIONS CONTENTSPECIFICATIONS CONTENT
What was required in the specification content? Clearly defined deliverables for:
Digital air photo and Orthophotos LiDAR A/T
Standards for calibration of: non-metric cameras LiDAR calibration Q/A – Q/C processes
A software packages that are readily available to all contractors
Meta Data standards
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 12Base Mapping and Geomatic Services Branch
LiDAR SPECIFICATIONS LiDAR SPECIFICATIONS CONTENTCONTENT
Specifics for the LiDAR specification content LiDAR is not an “open” system” – required a different approach A simple means of determining potential system accuracy
through error propagation formula Use material from others – FEMA, ASPRS, USGS Define a QA/QC process
Require calibration and reports Require data processing methodologies
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 13Base Mapping and Geomatic Services Branch
DEVELOPING DEVELOPING SPECIFICATIONSSPECIFICATIONS
Approach used to develop specifications Community of Practice (CoPs)
Building “buy-in” Engage academia, clients, producers and data custodians Build operational specifications Move research from academia into industry Specifications development from a project manager perspective
Create environment of shared knowledge and cooperation
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 14Base Mapping and Geomatic Services Branch
DEVELOPING DEVELOPING SPECIFICATIONSSPECIFICATIONS
Approach used to develop specifications Community of Practice (CoPs)
Building “buy-in” Engage academia, clients, producers and data custodians Build operational specifications Move research from academia into industry
Create environment of shared knowledge and cooperation
The Community of Practice is made up of academia, data producers , consulting community and clients
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 15Base Mapping and Geomatic Services Branch
Where is BMGS currently?Where is BMGS currently?
Where Base Mapping and Geomatic Services is at Specifications completion status:
Med. Format Digital Camera (MFDC) published LiDAR published A/T published
Pilot projects An area was flown using the draft specifications for MFDC LiDAR– now using some test data Multiple A/T testing using expert knowledge
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 17Base Mapping and Geomatic Services Branch
NEXT STEPSNEXT STEPS
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 18Base Mapping and Geomatic Services Branch
NEXT STEPSNEXT STEPS
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 19Base Mapping and Geomatic Services Branch
NEXT STEPSNEXT STEPS
Colour Range is very subjective,So which image would best serve the multi-use needs of Clients.
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 20Base Mapping and Geomatic Services Branch
NEXT STEPSNEXT STEPS
What are the Next Steps? Continue the Community of Practice Address colour chip issues Integrate digital and film specifications Simplify and consolidate Continue to evaluate performance and specification
requirements Continue to work with clients to meet their needs
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 21Base Mapping and Geomatic Services Branch
NEXT STEPSNEXT STEPS
Large Format Camera The Large Format Camera (LFC) was a high altitude aerial mapping camera scaled up to operate from the Space Shuttle. It was used on one mission in October 1984The camera weighs about half a ton and a single frame covers 23,400 square miles at about 10-20 m resolution.
What is the definitionWhat is the definitionof aof a
Large Format Camera? Large Format Camera?
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 22Base Mapping and Geomatic Services Branch
NEXT STEPSNEXT STEPS
What are the Next Steps? Continue the Community of Practice Address colour chip issues Integrate digital and film specifications Simplify and consolidate Address large format digital camera issues Further work on in-situ calibration sites
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 23Base Mapping and Geomatic Services Branch
ACTIVITIESACTIVITIES
Calibration wall In-situ calibration site External agreements
for calibration (BCIT) Continuation of
Community of Practice Continue to seek
external partnerships and cooperation (University of Calgary, USGS, …)
Base Mapping and Geomatic ServicesISO 9001:2000 Slide 24Base Mapping and Geomatic Services Branch
QUESTIONSQUESTIONS
Questions
Thank-you