BARON-MAX® 5-Axis Vertical Machining Centers

5-axis profiling vertical machining centers provides a cost-effective solution for five-axis machining operations

The 5 Axis or 5 Face gives you…

• Increased flexibility • Reduced cycle times • Improved surface finish • Machining strategies improved • Enhanced controlled precision • Reduced work in progress

Industrial sectors:

Mould and die machining

Aerospace

Automotive

Power generation

Telecommunications

Medical

 

Continuous 5 Axis machining Increased flexibility of 5 Axis machining provides additional new machining capability to be

explored with the added advantage of improved productivity.

 

 

Heavy duty cast iron rigid construction, Rapid traverse of 30 M/min reducing idle time

The integrated trunnion table provides exceptional part clearances and larger part capacity

Repeatability accuracy of all axis 0.005 mm

5 simultaneous axis machining

FAGOR Advanced Control Technologies for 5-Axis Machining

 

The machines with FAGOR last generation 8065 CNC for developing

their latest 5-axis machine, the calculation algorithms of the 8065 CNC

make it possible to optimize high speed machining. This achieves

higher cutting speeds, smoother contours, better surface finish and

higher accuracy, the 8065 CNC controls RTCP machining on 5-axis

machines. The main axes and another 2 rotary axes that may be at the

spindle or on the work table. In 5-axis machining, it is common to work

with inclined planes. The 8065 offers very simple formats for Defining

inclined planes both for machines with automatic rotary axes and for

manual ones.

Technical Specifications Model TR-120/5AX TR-200/5AX TR-320/5AX Travel (mm) Longitudinal travel (X-axis) 400 mm 500 mm 600 mm

Cross travel (Y-axis) 360 mm 360 mm 550 mm

Vertical travel (Z-axis) 350 mm 350 mm 500 mm

Spindle nose to table top 200 – 550 mm 200 – 550 mm 350 -720 mm

Spindle center to column 550 mm 550 mm 640 mm

Maximum Traverse Speed Rapid traverse X-axis 30 m/min Rapid traverse Y-axis 30 m/min Rapid traverse Z-axis 30 m/min Position Accuracy X, Y & Z ±0.005 mm (±0.0002”) Repeatability Accuracy X, Y & Z ±0.0025 mm (±0.0001”) Guide Way (Roller Guide Way) X-axis (Roller Guide Way ) 2 x 30 mm 2 x 35 mm

Y-axis (Roller Guide Way ) 2 x 35 mm 2 x 35 mm

Z-axis (Roller Guide Way ) 2 x 35 mm 2 x 35 mm

Lubricator Lubricator WAY LUBE 68 Ball Screw Diameter & pitch X-Y-Z 32 mm x pitch 10mm 40mm x pitch 10mm

Tool (40 taper) ARM Type Number of Tools 24 Tools 24 Tools

ATC Type Swing Arm Swing Arm

Tool Selection Bi-directional Bi-directional

Maximum Length 250 mm 300 mm Maximum Diameter 80mm 80mm Maximum Each Tool Weight 6 Kg 7 Kg Tool Change Time (T - T) 2 second 2 second Tool Change Time (C - C) 4 second 4 second Spindle Spindle Taper 30 or 40 40

Spindle speed 10000 rpm (std), 12000/18000 rpm(opt)

Spindle Motor 5.5/7.5 KW 7.5/11 KW

Air Supply Required 7Kg / square cm Power Supply Required 25 KVA 32 KVA(std), 45 KVA (option)

Machine Weight 3800kgs 4200 kgs 7000 kgs

Machine Dimension For Shipping 245*228*250 cm 300*228*255cm 337*228*255 cm

Tilt Rotary Table Specifications Work Table Diameter (mm) Ø120 Ø200 Ø 320

Center Bore Diameter (mm) Ø 30H7 Ø 30H7 Ø 110H7

Over all Height in Vertical (mm) 255 mm 340 mm 440 mm

Table center Height in Vertical (mm) 150 mm 210 mm 255 mm

Width Of T-Slot (mm) 10H7 12H7 12H7

Width Of Guide Block (mm) 14H7 18H7 18H7

Transmission Ratio 1 : 72 (Rotary),

1 : 120 (Tilt)

1 : 90 (Rotary),

1 : 120 (Tilt)

1 : 180 (Rotary),

1 : 180 (Tilt)

Indexing Resolution (deg.) 0.001° 0.001° 0.001°

Tilting Angle Range -20°~110° -110° ~ 110° -110° ~ 110°

Maximum Rotation Speed (min-1) 27.8 rpm (Rotary)

16.7 rpm (Tilt)

22.2 rpm (Rotary)

11.1 rpm (Tilt)

11.1 rpm (Rotary)

5.6 rpm (Tilt)

Load capacity (vertical / horizontal) 20Kg / 35Kg 50Kg / 100Kg 100Kg / 200Kg

Indexing Accuracy (sec.) 30" Rotary 25" Rotary 15" Rotary

60" Tilt 50" Tilt 30" Tilt

Repeatability (sec.) 4" Rotary 4" Rotary 4" Rotary

8" Tilt 8" Tilt 8" Tilt

Specifications are subject to change without notice

 

Standard Accessories BT/CAT/DIN-30/40 Auger type chip conveyor

High Speed Servo System Standard Spindle 10000rpm

Electrical Cabinet with Heat Exchanger Chip Flushing System + Water Gun

RS232 Interface Spindle Coolant Nozzle System

Work Light Spindle Air Blast

Alarm Lamp Lubrication System

Tool Box & Tools Auto Power Off System

Leveling Blocks & Bolts Portable Hand Wheel (MPG)

Fully Enclosed Splash Guard Operation Manual, Maintenance Manual

Rigid Tapping Test Report In CD Format

 

Optional Accessories Spindle Direct Drive (rpm) 12000, 15000

Spindle Built-in 24000, 30000

Chip Conveyor System Belt Type / Scrapper Type

Coolant Through Spindle (CTS) 20 bar or 50 bar

Linear Scale FAGOR

Oil Skimmer / Separator Available

Tool offset Probe

BARON-MAX® MACHINE TOOLS Since 1976

KOAN CHO MACHINERY CO., LTD. P.O. Box 20 – 30 Taichung, Taiwan, R.O.C

No. 217 Tatun 7th Street, Taichung, Taiwan, R.O.C Tel: 886-4-2475-9927, 2475-9981. Fax: 886-4-2475-9936, 2475-9939

E-mail: baronmax@ms15.hinet.net http://www.baronmax.com