Balustrade and Stepss3.amazonaws.com/.../Cranborne_Stone_Balustrade_and_Steps_Cata… · Style 2...
Transcript of Balustrade and Stepss3.amazonaws.com/.../Cranborne_Stone_Balustrade_and_Steps_Cata… · Style 2...
Balustrades and StepsCatalogue 2011
Butts Pond, Sturminster Newton, Dorset DT10 1AZTelephone 01258 472685 Fax 01258 471251
email [email protected] web www.cranbornestone.com
Catalogue version 2011/1
Introduction
Bath Yellow Cotswold Shaftesbury Green York Portland White
Our range of standard colours have been developed to reflect the regional variations of true stone.
About Cranborne Stone
At Cranborne Stone we have been supporting property professionals with their building projects for over 30 years, utilising our extensive knowledge and skill in supply of cast stone architectural features.
Our team is made up of approachable estimators, creative designers,skilled craftsmen and a diligent delivery team as well as the essential back office support that ensures each project runs smoothly.
We are proud of our reputation for being easy to deal with and for having a flexible approach enabling us to match the individual demands of each project and look forward to demonstrating these to you.
High quality cast stone features will enhance any property project from the restoration of a historic building to a contemporary style new build.
With Cranborne Stone property developers not only benefit from supply of a wide range of distinctive architectural features but also clear and responsive project support.
Wide range of styles & featuresBespoke design serviceChoice of regional stone coloursColour matching service to blend the new with existingNamed support for each projectInterpretation of initial drawingsSound advice on managing cost whilst maintaining aesthetic consistencyProvision of detailed drawingsRestoration capabilityFitting serviceClear to read quotationsAgreed delivery dates
If you would like to know more or would like specific assistance with a project please call or email one of our knowledgeable team who will be pleased to help.
••••••••••••
Developing a Property with Cranborne Stone
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Guides are available for each ofour products.These will help you choose thecorrect components and assistyou in installation.
Italian Terracotta
Contents
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 2 Balustrade
Style 3 Balustrade
Baluster Range
Style 7 Balustrade
Style 13 Balustrade
Style 10 Balustrade
Style 14 Balustrade
Style 24 Balustrade
Style 25 Balustrade
Style 23 Balustrade
Style 4 Balustrade
Style 5 Balustrade
Style 21 Balustrade
1.1
1.2
1.3
1.4
1.6
1.7
1.8
1.9
1.12
1.15
1.16
1.17
1.18
Step Treads
Radius Treads
Scroll Steps
2.1
2.2
2.3
Balustrade
Style 6 Balustrade
Style 22 Balustrade
Steps
Style 20 Balustrade
1.11
1.13
Style 18 Balustrade
1.10
Style 9 Balustrade
1.5
1.14
3.1
3.2
CAD and technical information
Glossary and FAQ’s
Information
1.1
Style 2 BalustradeRenaissance Baluster combined with the Renaissance Rail and Plinth with Decorated Piers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
673mm
306mm
305mm
614mm
604mm
305mm200mm
123mm
305mm
460mm
78mm
673mm
200mm
306mm
203mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
460 5
460
85
5
78
85
16
123
203
25200
BS6A
BS6B
BS6C
BS6D
85
85
614
604
Description
Renaissance baluster
Renaissance baluster - Sloping*
Renaissance Rail
Renaissance Plinth
* The Sloping Renaissance baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 2’ Balustrade
78 13306BS6E 306Renaissance Pier Cap - End
78 13306BS6G 306Renaissance Pier Cap - Corner
78 13306BS6F 306Renaissance Pier Cap - Intermediate
123 22305BS6H 305Renaissance Pier Plinth - End
123 22305BS6I 305Renaissance Pier Plinth - Intermediate
123 22305BS6J 305Renaissance Pier Plinth - Corner
460 35214BS6L 214Renaissance Decorated Pier Shaft
Plinth Plan
Elevation
Section
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
1.2Telephone 01258 472685 email [email protected] web www.cranbornestone.com
673mm
306mm
305mm
614mm
604mm
305mm200mm
Style 3 BalustradeHenbury Baluster combined with the Renaissance Rail and Plinth with Decorated Piers.
123mm
305mm
460mm
78mm
673mm
200mm
306mm
203mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
460 10
460
130
10
78
130
123
203
200
BS16A
BS16B
BS6C
BS6D
130
130
614
604
Description
Henbury baluster
Henbury baluster - Sloping*
Renaissance Rail
Renaissance Plinth
* The Sloping Henbury baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 3’ Balustrade
78 306BS6E 306Renaissance Pier Cap - End
78 306BS6G 306Renaissance Pier Cap - Corner
78 306BS6F 306Renaissance Pier Cap - Intermediate
123 305BS6H 305Renaissance Pier Plinth - End
123 305BS6I 305Renaissance Pier Plinth - Intermediate
123 305BS6J 305Renaissance Pier Plinth - Corner
460 214BS6L 214Renaissance Decorated Pier Shaft
Plinth Plan
Elevation
Section
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
16
25
13
13
13
22
22
22
35
1.3
Style 4 BalustradeHenbury Baluster combined with the Kensington Rail and the Georgian Plinth with Plain Piers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
230mm
742mm
356mm
332mm
800mm
787mm
332mm
168mm
332mm
460mm
102mm
742mm
230mm
356mm
220mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
460 10
460
130
10
102
130
31
168
220
60230
BS16A
BS16B
BS7C
BS4D
130
130
800
787
Description
Henbury baluster
Henbury baluster - Sloping*
Kensington Rail
Georgian Plinth
* The Sloping Henbury baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 4’ Balustrade
102 24356BS7E 356Kensington Pier Cap - End
102 24356BS7G 356Kensington Pier Cap - Corner
102 24356BS7F 356Kensington Pier Cap - Intermediate
168 36332BS4H 332Georgian Pier Plinth - End
168 36332BS4I 332Georgian Pier Plinth - Intermediate
168 36332BS4J 332Georgian Pier Plinth - Corner
460 56260BS16K/460 260Henbury Plain Pier Shaft
Plinth Plan
Elevation
Section
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
1.4Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 5 BalustradeClassical Baluster combined with the Classical Rail and Plinth with Decorated Piers.
235mm
673mm
366mm
332mm
811mm
815mm
332mm
88mm
332mm
505mm
68mm
673mm
235mm
366mm
230mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
505 13
505
150
13
68
150
21
88
230
33235
BS5A
BS5B
BS5C
BS5D
150
150
811
815
Description
Classical baluster
Classical baluster - Sloping*
Classical Rail
Classical Plinth
* The Sloping Classical baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 5’ Balustrade
68 16366BS5E 366Classical Pier Cap - End
68 16366BS5G 366Classical Pier Cap - Corner
68 16366BS5F 366Classical Pier Cap - Intermediate
88 19332BS5H 332Classical Pier Plinth - End
88 19332BS5I 332Classical Pier Plinth - Intermediate
88 19332BS5J 332Classical Pier Plinth - Corner
505 62280BS5L 280Classical Decorated Pier Shaft
Plinth Plan
Elevation
Section
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
1.5
Style 6 BalustradeClassical Baluster combined with the Georgian Rail and Plinth with Decorated Piers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
168mm
332mm
505mm
110mm
795mm
230mm
260mm
410mm
230mm
795mm
410mm
332mm
765mm
787mm
332mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
110 37
168
260
60230
BS4C
BS4D
765
787
Description
Georgian Rail
Georgian Plinth
‘Style 6’ Balustrade
110 33410BS4E 410Georgian Pier Cap - End
110 33410BS4G 410Georgian Pier Cap - Corner
110 33410BS4F 410Georgian Pier Cap - Intermediate
168 36332BS4H 332Georgian Pier Plinth - End
168 36332BS4I 332Georgian Pier Plinth - Intermediate
168 36332BS4J 332Georgian Pier Plinth - Corner
505 13
505
150
13150
BS5A
BS5B
150
150
Classical baluster
Classical baluster - Sloping*
* The Sloping Classical baluster can be made to any angle, please specify the angle required at time of ordering
505 62280BS5L 280Classical Decorated Pier Shaft
Plinth Plan
Elevation
Section
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
400mm 1000mm
899mm
400mm300mm
410mm 765mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
520 19
520
160
19140
257 113300
BS14A
BS14B
BS12D
160
140
1000
Description
Vyne Plinth
257 60400BS12H 400Vyne Pier Plinth - End
257 60400BS12I 400Vyne Pier Plinth - Intermediate
257 60400BS12J 400Vyne Pier Plinth - Corner
* The Sloping Vaux-Le-Vicomte baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 7’ Balustrade
520 64280BS12L/520 280Vyne Panelled Pier Shaft
110 37260BS4C 765Georgian Rail
110 33410BS4E 410Georgian Pier Cap - End
110 33410BS4G 410Georgian Pier Cap - Corner
110 33410BS4F 410Georgian Pier Cap - Intermediate
1.6Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 7 BalustradeVaux-Le-Vicomte Baluster combined with the Georgian Rail and Vyne Plinth with Decorated Piers.
257mm
400mm
520mm 899mm
300mm
110mm
260mm
410mm
Plinth Plan
Elevation
Section
Vaux-le-Vicomte baluster
Vaux-le-Vicomte baluster - Sloping*
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
520 20
520
160
20160
150 72360
BS2A
BS2B
BS2D
160
160
800
Description
Regency baluster
Regency baluster - Sloping*
Regency Plinth
150 76585BS2H 460Regency Pier Plinth - End
150 76585BS2I 460Regency Pier Plinth - Intermediate
150 92585BS2J 585Regency Pier Plinth - Corner
* The Sloping Regency baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 9’ Balustrade
520 120387BS2LC 387Regency Pier Shaft - Plain - Corner
115 54352BS2C 800Regency Rail
115 58585BS2E 460Regency Pier Cap - End
115 71585BS2G 585Regency Pier Cap - Corner
115 58585BS2F 460Regency Pier Cap - Intermediate
520 10160BS2AH 80Regency baluster - Half
520 89387BS2K 260Regency Pier Shaft - Plain
1.7
Style 9 BalustradeRegency Baluster combined with the Regency Rail and Plinth with Plain Piers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
585mm 800mm
797mm
460mm360mm
585mm 800mm
Plinth Plan
Elevation
Section
150mm
460mm
520mm
797mm
360mm
115mm
352mm
460mm
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
257mm
400mm
520mm
150mm
939mm
300mm
400mm
300mm
Section
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
150 71
257
300
113300
BS12C
BS12D
1000
1000
Description
Vyne Rail
Vyne Plinth
150 32400BS12E 400Vyne Pier Cap - End
150 32400BS12G 400Vyne Pier Cap - Corner
150 32400BS12F 400Vyne Pier Cap - Intermediate
257 60400BS12H 400Vyne Pier Plinth - End
257 60400BS12I 400Vyne Pier Plinth - Intermediate
257 60400BS12J 400Vyne Pier Plinth - Corner
* The Sloping Regency baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 10’ Balustrade
520 20
520
160
20160
BS2A
BS2B
160
160
Regency baluster
Regency baluster - Sloping*
520 64280BS12L/520 280Vyne Panelled Pier Shaft
1.8Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 10 BalustradeRegency Baluster combined with the Vyne Rail and Plinth with Decorated Piers.
400mm
400mm
1000mm
1000mm
939mm
400mm300mm
Plinth Plan
Elevation
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
150mm
460mm
580mm
857mm
360mm
115mm
352mm
460mm
460mm360mm
Plinth Plan
585mm 800mm
857mm
585mm 800mm
Elevation
1.9
Style 13 BalustradeMargam Baluster combined with the Regency Rail and Plinth with Panelled Piers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Section
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
580 33
580
200
33200
150 72360
BS15A
BS15B
BS2D
200
100
800
Description
Margam baluster
Margam baluster - Sloping*
Regency Plinth
150 76585BS2H 460Regency Pier Plinth - End
150 76585BS2I 460Regency Pier Plinth - Intermediate
150 92585BS2J 585Regency Pier Plinth - Corner
‘Style 13’ Balustrade
580 99387BS2LC/580 387Regency Pier Shaft - Panelled - Corner
115 54352BS2C 800Regency Rail
115 58585BS2E 460Regency Pier Cap - End
115 71585BS2G 585Regency Pier Cap - Corner
115 58585BS2F 460Regency Pier Cap - Intermediate
580 107387BS2L/580 260Regency Pier Shaft - Panelled
* The Sloping Margam baluster can be made to any angle, please specify the angle required at time of ordering
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
Section
1.10Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 14 BalustradeMargam Baluster combined with the Vyne Rail and Plinth with Decorated Piers.
400mm300mm
Plinth Plan
400mm
400mm
1000mm
1000mm
999mm
Elevation
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
150
257
300
300
BS12C
BS12D
1000
1000
Description
Vyne Rail
Vyne Plinth
150 400BS12E 400Vyne Pier Cap - End
150 400BS12G 400Vyne Pier Cap - Corner
150 400BS12F 400Vyne Pier Cap - Intermediate
257 400BS12H 400Vyne Pier Plinth - End
257 400BS12I 400Vyne Pier Plinth - Intermediate
257 400BS12J 400Vyne Pier Plinth - Corner
* The Sloping Margam baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 14’ Balustrade
580 71280BS12L/580 280Vyne Panelled Pier Shaft
580 33
580
200
33200
BS15A
BS15B
200
100
Margam baluster
Margam baluster - Sloping*
257mm
400mm
580mm
150mm
999mm
300mm
400mm
300mm
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
113
32
32
32
60
60
60
71
1.11
Style 18 BalustradeKensington Baluster combined with the Kensington Rail and Plinth with Panelled Piers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Section
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
102 31200BS7D 800
Description
Kensington Plinth
102 22340BS7H 340Kensington Pier Plinth - End
102 22340BS7I 340Kensington Pier Plinth - Intermediate
102 22340BS7J 340Kensington Pier Plinth - Corner
* The Sloping Kensington baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 18’ Balustrade
610 75280BS7L 280Kensington Panelled Pier Shaft
610 17
610
140
17140
BS7A
BS7B
140
140
Kensington baluster
Kensington baluster - Sloping*
102 24356BS7E 356Kensington Pier Cap - End
102 24356BS7G 356Kensington Pier Cap - Corner
102 24356BS7F 356Kensington Pier Cap - Intermediate826mm
102mm
340mm
610mm
102mm
200mm
356mm
220mm
Plinth Plan
Elevation
340mm200mm
356mm
340mm
800mm
800mm
826mm
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
102 32220BS7C 800Kensington Rail
Section
1.12Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 20 BalustradeOxford Baluster combined with the Vyne Rail and Plinth with Decorated Piers.
Plinth Plan
Elevation
257mm
400mm
675mm
150mm
1094mm
300mm
400mm
300mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
150 71
257
300
300
BS12C
BS12D
1000
1000
Description
Vyne Rail
Vyne Plinth
150 400BS12E 400Vyne Pier Cap - End
150 400BS12G 400Vyne Pier Cap - Corner
150 400BS12F 400Vyne Pier Cap - Intermediate
257 400BS12H 400Vyne Pier Plinth - End
257 400BS12I 400Vyne Pier Plinth - Intermediate
257 400BS12J 400Vyne Pier Plinth - Corner
* The Sloping Oxford baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 20’ Balustrade
675 83280BS12K/675 280Vyne Plain Pier Shaft
675 26
675
140
26140
BS9A
BS9B
140
140
Oxford baluster
Oxford baluster - Sloping*
400mm
400mm
1000mm
1000mm
1094mm
400mm300mm
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
113
32
32
32
60
60
60
1.13
Style 21 BalustradeOxford Baluster combined with the Kensington Rail and Plinth with Panelled Piers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Section
Plinth Plan
Elevation
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
102 31200BS7D 800
Description
Kensington Plinth
102 22340BS7H 340Kensington Pier Plinth - End
102 22340BS7I 340Kensington Pier Plinth - Intermediate
102 22340BS7J 340Kensington Pier Plinth - Corner
* The Sloping Oxford baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 21’ Balustrade
675 83280BS7L/675 280Kensington Panelled Pier Shaft
675 26
675
140
26140
BS9A
BS9B
140
140
Oxford baluster
Oxford baluster - Sloping*
102 32220BS7C 800Kensington Rail
102 24356BS7E 356Kensington Pier Cap - End
102 24356BS7G 356Kensington Pier Cap - Corner
102 24356BS7F 356Kensington Pier Cap - Intermediate891mm
102mm
340mm
675mm
102mm
200mm
356mm
220mm
340mm200mm
356mm
340mm
800mm
800mm
891mm
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
Section
1.14Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 22 BalustradeVyne Baluster combined with the Regency Rail and Plinth with Panelled Piers.
Plinth Plan
Elevation
585mm 800mm
952mm
460mm360mm
585mm 800mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
675 29
675
180
29180
150 72360
BS12A
BS12B
BS2D
180
180
800
Description
Vyne baluster
Vyne baluster - Sloping*
Regency Plinth
150 76585BS2H 460Regency Pier Plinth - End
150 76585BS2I 460Regency Pier Plinth - Intermediate
150 92585BS2J 585Regency Pier Plinth - Corner
‘Style 22’ Balustrade
BS2LC/675Regency Pier Shaft - Panelled - Corner - 675mm
115 54352BS2C 800Regency Rail
115 58585BS2E 460Regency Pier Cap - End
115 71585BS2G 585Regency Pier Cap - Corner
115 58585BS2F 460Regency Pier Cap - Intermediate
675 15180BS12AH 90Vyne baluster - Half
675 125387BS2L/675 280Regency Pier Shaft - Panelled - 675mm
* The Sloping Vyne baluster can be made to any angle, please specify the angle required at time of ordering
675 185387 387150mm
460mm
675mm
952mm
360mm
115mm
352mm
460mm
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
Style 23 BalustradeVyne Baluster combined with the Vyne Rail and Plinth.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
257mm
400mm
675mm
150mm
1094mm
300mm
400mm
300mm
Section
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
675 29
675
180
29
150
180
71
257
300
113300
BS12A
BS12B
BS12C
BS12D
180
180
1000
1000
Description
Vyne baluster
Vyne baluster - Sloping*
Vyne Rail
Vyne Plinth
150 32400BS12E 400Vyne Pier Cap - End
150 32400BS12G 400Vyne Pier Cap - Corner
150 32400BS12F 400Vyne Pier Cap - Intermediate
257 60400BS12H 400Vyne Pier Plinth - End
257 60400BS12I 400Vyne Pier Plinth - Intermediate
257 60400BS12J 400Vyne Pier Plinth - Corner
* The Sloping Vyne baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 23’ Balustrade
675 91280BS12L 280Vyne Panelled Pier Shaft
400mm
400mm
1000mm
1000mm
1094mm
400mm300mm
Plinth Plan
Elevation
1.15
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
Style 24 BalustradeCranborne Baluster combined with the Regency Rail and Plinth.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Plinth Plan
Elevation
Section
150mm
460mm
675mm
952mm
360mm
115mm
352mm
460mm
585mm 800mm
952mm
460mm360mm
585mm 800mm
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
675 26
675
125
26125
150 72360
BS13A
BS13B
BS2D
125
125
800
Description
Cranborne baluster
Cranborne baluster - Sloping*
Regency Plinth
150 76585BS2H 460Regency Pier Plinth - End
150 76585BS2I 460Regency Pier Plinth - Intermediate
150 92585BS2J 585Regency Pier Plinth - Corner
‘Style 24’ Balustrade
BS2LC/675Regency Pier Shaft - Panelled - Corner - 675mm
115 54352BS2C 800Regency Rail
115 58585BS2E 460Regency Pier Cap - End
115 71585BS2G 585Regency Pier Cap - Corner
115 58585BS2F 460Regency Pier Cap - Intermediate
675 13125BS13AH 65Cranborne baluster - Half
675 102387BS2L/675 280Regency Pier Shaft - Panelled - 675mm
* The Sloping Cranborne baluster can be made to any angle, please specify the angle required at time of ordering
675 185387 387
1.16
All our balustrade styles feature an optional 135° Pier, please call a member of our technical team with your requirements.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Style 25 BalustradeCranborne Baluster combined with the Vyne Rail and Plinth.
Code
Height
(mm)
Width
(mm) (mm)
Length Weight
(Kg)
675 26
675
125
26
150
125
71
257
300
113300
BS13A
BS13B
BS12C
BS12D
125
125
1000
1000
Description
Cranborne baluster
Cranborne baluster - Sloping*
Vyne Rail
Vyne Plinth
150 32400BS12E 400Vyne Pier Cap - End
150 32400BS12G 400Vyne Pier Cap - Corner
150 32400BS12F 400Vyne Pier Cap - Intermediate
257 60400BS12H 400Vyne Pier Plinth - End
257 60400BS12I 400Vyne Pier Plinth - Intermediate
257 60400BS12J 400Vyne Pier Plinth - Corner
* The Sloping Cranborne baluster can be made to any angle, please specify the angle required at time of ordering
‘Style 25’ Balustrade
1094mm
400mm
400mm
1000mm
1000mm
400mm300mm
257mm
400mm
675mm
150mm
1094mm
300mm
400mm
300mm
Plinth Plan
Elevation
Section
1.17
675 91280BS12L 280Vyne Panelled Pier Shaft
Baluster RangeWe have a large range of balusters of varying heights and designs to suit all applications.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
140mm
130mm
140mm
140mm 180mm
170mm
140mm
125mm
125mm
125mm
85mm
85mm
130mm
120mm
135mm
150mm 160mm
140mm
165mm
165mm
200mm
180mm
BS6ARennaissance
Baluster460mm high
BS16AHenburyBaluster
460mm high
BS5AClassicalBaluster
505mm high
BS14AVaux-le-Vicomte
Baluster520mm high
BS2ARegencyBaluster
520mm high
BS15AMargamBaluster
580mm high
BS17ABufton
Baluster610mm high
BS7AKensington
Baluster610mm high
BS9AOxford
Baluster675mm high
BS12AVyne
Baluster675mm high
BS13ACranborne
Baluster675mm high
All balusters have a ‘cast in’ 6mm Stainless Steel reinforcement bar protruding top and bottom suitable for fixing.
1.18
Step TreadsStraight, Return and Curtailed treads with matching risers.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Suitable Foundation
ContinuousBedding Mix
Riser
Tread
Riser to suit
50mm
Tread Depth(excluding Bullnose)
50
25mm
Code
Height
(mm)
Depth*
(mm) (mm)
Length Weight
(Kg)
Straight Treads
50 29
50
550
26500
STA50-55
STA50-50
500
500
50 24
50
450
21400
STA50-45
STA50-40
500
500
50 18
50
350
16300
STA50-35
STA50-30
500
500
50 13
50
250
58550
STA50-25
STA100-55
500
1000
50 53
50
500
47450
STA100-50
STA100-45
1000
1000
50 42
50
400
37350
STA100-40
STA100-35
1000
1000
50 32
50
300
26250
STA100-30
STA100-25
1000
1000
50 531000STA50-100 500
Code
Height
(mm)
Depth*
(mm) (mm)
Length Weight
(Kg)
Return Treads
50 58550STB100-55 1000
50 53
50
500
47450
STB100-50
STB100-45
1000
1000
50 42
50
400
37350
STB100-40
STB100-35
1000
1000
50 32
50
300
26250
STB100-30
STB100-25
1000
1000
Code
Height
(mm)
Depth
(mm) (mm)
Length Weight
(Kg)
Risers
4STR-75
5
7
8
9
STR-100
STR-125
STR-150
STR-175
100 50 500
125 50 500
175 50 500
150 50 500
75 50 500
11STR-200 200 50 500
* Depth excludes 25mm bullnose overhang
Curved Curtail TreadSTC100-35 Available LH and RH
375mm
1025mm
840mm
Plan
1000mm(overall)
Depth (exc. bullnose)
25mm bullnose
Return Tread STB available LH and RH(LH shown)
Plan
Our bullnose treads are supplied in 1000mm and 500mm lengthswith depths to suit all applications up to 550mm excluding the 25mm bullnose.Risers are supplied in 500mm lengths with various heights up to 200mm.Our steps are suitable for light domestic use and shouldbe installed on a continuous mortar bed.
2.1
156mm
50mm
320mm(including bullnose)
50
Riser edge radius
Step edge radius
Radius Step TreadsOur radius treads can be used to form a large staircase or individually to create a small set of steps or a circular paved area.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com 2.2
Risers
Code
Radius to Casts per Riser edge WeightHeight
riser edge circle length per cast(mm)
(mm) (mm) (kg)
STR95C 925 12 500 5150
STR125C 1225 16 500 5150
STR155C 1525 20 500 5150
STR185C 1825 23 500 5150
STR215C 2125 27 500 5150
STR245C 2425 31 500 5150
STR275C 2725 35 500 5150
STR305C 3025 39 500 5150
STR335C 3325 42 500 5150
STR365C 3625 46 500 5150
Treads
Code
Radius to Casts per Step edge Weight
step edge circle length per cast
(mm) (mm) (kg)
STA95C 950 6 995 31
STA125C 1250 8 982 33
STA155C 1550 10 974 34
STA185C 1850 12 969 34
STA215C 2150 14 965 35
STA245C 2450 16 962 35
STA275C 2750 18 960 35
STA305C 3050 20 958 35
STA335C 3350 22 957 36
STA365C 3650 24 956 36
Height
(mm)
50
50
50
50
50
50
50
50
50
50
Our radius treads can be used to form anything up to a full circleor can be used individually to create a simple curved step.Our steps are suitable for light domestic use and shouldbe installed on a continuous mortar bed.
Plan
Elevation
Section Detail
2.3
Scroll StepsColonial inspired decorative rail compatible with our range of bullnose step treads.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
1218mm
348mm
2130mm(excluding bullnose)
25mm
203mm
203mm
Our Scroll steps are available in a number of configurations.The example illustration shows two ‘sets’ of steps used tocreate an overall rise of 1218mm.Each set of steps gives an overall ‘rise’ of 609mm over anoverall ‘going’ of 1062mm as standardThese dimensions can be easily adapted to any rise.Our steps are suitable for light domestic use and shouldbe installed on a continuous mortar bed.
1566mm
120mm
432mm
CAD FilesDrawings of all our Balustrades and Steps are available for downloading by visiting our website.
Telephone 01258 472685 email [email protected] web www.cranbornestone.com
AutoCAD® Sketchup® Acrobat® AutoCAD® Sketchup® Acrobat®
AutoCAD®Autodesk® DWG TrueView™ software is a freestand-alone DWG™ viewer.Visit their website to downloadhttp://usa.autodesk.com/
Sketchup®Anyone can use the free Sketchup Viewerto view and print models created in Sketchup.Visit their website to downloadhttp://sketchup.google.com/
Acrobat Reader®Use Adobe Reader to view, search,verify, print, and collaborate on Adobe PDF files.Visit their website to downloadhttp://www.adobe.com
File ViewerswebsiteIf you do not have the software to view these files, free viewing software is available by visiting the relevant below
Style 2 Balustrade
Style 3 Balustrade
Baluster Range
Style 7 Balustrade
Style 13 Balustrade
Style 10 Balustrade
Style 14 Balustrade
Style 24 Balustrade
Style 25 Balustrade
Style 23 Balustrade
Style 4 Balustrade
Style 5 Balustrade
Style 21 Balustrade
Step Treads
Scroll Steps
Radius Treads
Balustrade
Style 6 Balustrade
Style 22 Balustrade
Steps
Style 20 Balustrade
Style 18 Balustrade
Style 9 Balustrade
3.1
3.2 Telephone 01258 472685 email [email protected] web www.cranbornestone.com
Glossary and FAQ’sTo help you and answer a few of your questions, we have compiled this handy list of commonly used terms and questions.
GlossaryBalustrade - (See illustration below)
Pier Cap
Pier Shaft
Pier Plinth
Rail PlinthBaluster
- The Pier Cap continues the profile of the rail above the Pier Shaft,it is commonly the widest part of the balustrade.
- The Pier Shaft creates the structural support for the balustrade.These are generally mechanically fixed to the Pier Plinth and concrete filled.
- As with the Pier Cap, the Pier Plinth continues the decorativeelement of the plinth below the Shaft and creates a firm base to supportthe Pier Shaft.
- The decorative capping to the Balustrade. - A decorative base that supports the Balustrade.
- Decorative feature that supports the rail.
FAQCan you cut the Stone?
Is your Balustrade available to suit a curved wall?
Do you manufacture Balustrade to comply with building regulations?
Is the stone frostproof?
How does the stone age?
How do we fix the stone?
Are there installation guides?
What colours are available?
Do I need an account to order with you?
Is pointing mix supplied?
Our stone cuts and carves just as true sandstone. A consistent texturethroughout ensures that our product cuts and carves smoothly.
We can manufacture bespoke radii and curves to suit your project.If you require curved in either plan or elevation, please contact a member ofour technical team on 01258 472685.
Our Style 23 and 25 have an overall height of 1100mm and theirbalusters can be spaced to create less than 100mm voids.
All our stone products are frost proof and are unaffected in normalconditions if installed correctly.
The stone ages in a similar way to true stone, this can be encouragedor slowed by using a number of readily available products after installation.
There are a range of fixings specially designed for cast stone. If requiredwe can cast in fixings subject to your specification.
Each of our products has a guide available. These are availablefrom our technical department.
The Cranborne Stone range of products are available in our six regional coloursPortland White, Cotswold, Bath Yellow, Yorkstone, Devon Red andShaftesbury Green.Bespoke and colour matching is available as a special order.
We supply both the trade and private customers alike, you do not needan account with us to place an order. We do however request a deposit atthe time of order.
Where required, we supply sufficient colour matched aggregate free of charge.We recommend that this is mixed at a ratio of 4:1 with Portland White Cement.Full pointing instructions are available upon request.
Plinth
Pier Shaft
Rail
Pier Cap
Baluster
Pier Plinth
StepsBullnose Nose Tread Riser GoingRise
- The rounded edge on the front (nose) of the step.- The front edge of a step, usually rounded to protect from wear.- The flat part of a step that creates the landing on each individual step.
- The back vertical section of each tread. - The overall distance travelled horizontally by the steps.
- The overall distance travelled vertically by the steps.
web www.cranbornestone.com
email [email protected]
Telephone 01258 472685Fax 01258 471251
Address Cranborne Stone LtdButts PondSturminster Newton DorsetDT10 1AZ