Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School...
-
Upload
lawrence-morris -
Category
Documents
-
view
215 -
download
0
Transcript of Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School...
![Page 1: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/1.jpg)
Baltimore Section
The Robot Challenge
An Affordable hands-on Engineering Experience
for High School students
March 24 2006
![Page 2: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/2.jpg)
Baltimore Section
FINISHED ROBOT IN AUTOMATED MODE
![Page 3: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/3.jpg)
Baltimore Section
![Page 4: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/4.jpg)
Baltimore Section
BASIC ROBOT IN MANUAL MODE
![Page 5: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/5.jpg)
Baltimore Section
![Page 6: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/6.jpg)
Baltimore Section
TASKS 1. Build a Robot, keeping a detailed log. 2. Prepare a Written Report about the
experience, including schedule, problems encountered, and solutions.
3. Compete with teams from other schools over a course with hurdles.
4. Make Oral Presentation to judges.
![Page 7: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/7.jpg)
Baltimore Section
10 YEARS EXPERIENCE
0
20
40
60
80
100
120
1996-97
1998-99
2000-01
2002-03
2004-05
INITIAL # OF TEAMS
![Page 8: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/8.jpg)
Baltimore Section
RELATIONSHIPS
CHALLENGESBALTIMORE MUSEUM OF INDUSTRY
ELEMENTARY/MIDDLE/HIGH SCHOOLS
TECHNOLOGY EDUCATIONASSOCIATION OF MARYLAND
(TEAM)
TECHNICAL SOCIETIES(INSTITUTE OF ELECTRICAL AND
ELECTRONIC ENGINEERS)(IEEE)
ENGINEERING SOCIETYOF BALTIMORE
(ENGINEERS CLUB)
![Page 9: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/9.jpg)
Baltimore Section
BENEFITS
1. Appeals to boys and girls typically over a third of the participants
are girls
![Page 10: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/10.jpg)
Baltimore Section
BENEFITS
2. AFFORDABLE By keeping the cost low (about $12 a
student for the basic Robot) we are able to reach all students - even those in Inner City schools. Non-USA schools may be able to reduce the cost even further (see later).
![Page 11: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/11.jpg)
Baltimore Section
BENEFITS
3. TEACHERS LIKE IT! It does involve more work for teachers,
but teachers particularly like the discipline of the Written Report and the Oral Presentations
![Page 12: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/12.jpg)
Baltimore Section
BENEFITS
4. STUDENTS LIKE IT! The hands-on activity with tools gets the
students out of their chairs, and is a good project for Seniors who sometimes begin to taper off as they reach the end of their high school careers. They also like the challenge of competing against other teams.
![Page 13: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/13.jpg)
Baltimore Section
BENEFITS
5. THERE’S SOMETHING FOR EVERYONE project calls for a variety of skills and
talents: working with tools, writing, designing an attractive robot body that does not interfere with the mechanical operation, teamwork, organization, and electrical theory.
![Page 14: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/14.jpg)
Baltimore Section
BENEFITS
6. KIDS LEARN
![Page 15: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/15.jpg)
Baltimore Section
BENEFITS
6. KIDS LEARN They enjoy themselves as they learn
![Page 16: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/16.jpg)
Baltimore Section
BENEFITS
6. KIDS LEARN They enjoy themselves as they learn They learn what its like to be an engineer
![Page 17: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/17.jpg)
Baltimore Section
BENEFITS
6. KIDS LEARN Even if they do not choose to become
engineers, the skills they learn will serve them well in any profession.
![Page 18: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/18.jpg)
Baltimore Section
TEAMWORK
Students work together as a team. Mistakes by one affect the others. Students learn from mistakes and not
to blame other members of the team. Each leg of the Robot is operated by a
different member of team. They must learn to cooperate or the Robot will fail.
![Page 19: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/19.jpg)
Baltimore Section
DETAILS Teams are provided with a Manual
and a kit. The duration of the project will
depend on the level of Challenge selected (4 levels are available) and the number of hours a week that they will spend on the project.
Students provide the D-cell batteries.
![Page 20: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/20.jpg)
Baltimore Section
DETAILS
Students can work on the project during class time, or after school as an voluntary activity.
Typically they will spend 2 to 4 months on the project - based on about 3 hours a week of work.
A good teacher stimulates ideas but lets the students solve the problems.
![Page 21: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/21.jpg)
Baltimore Section
TOOLS Basic carpentry tool are required -
saw, jig saw, electric drill, needle-nose pliers, vise, screw drivers, wire stripper, sharp knife, sand paper, 25 watt soldering iron, safety goggles.
A Dremel tool is advisable for cutting the threaded rods, and a bench drill press is helpful for aligning holes.
![Page 22: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/22.jpg)
Baltimore Section
MANUALS
The Manual provides all the information the students will need to implement the project, and it can also be integrated into a teaching program on basic mechanics and electricity.
Teachers receive their own copy of the Manual, plus additional information.
![Page 23: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/23.jpg)
Baltimore Section
MANUALS
The Basic Students’ Manual contains all the information needed to build the robot, standard orthogonal 2-dimention-al drawings, and information on preparing the Written Report and getting ready for the Challenge event.
There is also background information on reading/understanding drawings.
![Page 24: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/24.jpg)
Baltimore Section
MANUALS
The Teachers Manual also contains sketches of what the Basic robot will look like when built, as well as information on the body covering.
The Teacher may share this information with Students, or let them work this out by themselves.
![Page 25: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/25.jpg)
Baltimore Section
LEVELS OF DIFFICULTY The 4 levels of “Challenge” are
2-leg Robot4-leg Robot2-leg Robot with Automation4-leg Robot with Automation
All Robots participate in the same event, but automated Robots run the course twice - first Manual, then Auto.
![Page 26: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/26.jpg)
Baltimore Section
AUTOMATION
Automation requires an additional kit, has an additional Manual, and there is considerably more emphasis on electri-cal circuitry, electronics and program-ing. The kit includes the parts for a Stamp 2 with 16 I/O ports, a Bread-board, and all the hardware needed to operate the robot. It’s a lot harder!
![Page 27: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/27.jpg)
Baltimore Section
AUTOMATION
Students take what they have learned operating the robot manually, translate it into code, and program the controller to duplicate the 8 commands needed to operate the 2-leg robot, or the 16 commands for the 4-leg robot.
It turns out that every robot will be programmed in a unique manner.
![Page 28: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/28.jpg)
Baltimore Section
RELATIVE COSTS
2-leg Robot: X4-leg Robot: 2X2-leg Robot w/Automation: 3X4-leg Robot w/Automation: 4X
All kits include the Manuals
![Page 29: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/29.jpg)
Baltimore Section
RELATIVE EFFORT
2-leg Robot X 4-leg Robot 1.5X 2-leg Robot w/Automation* 2X 4-leg Robot w/Automation* 2.5X
Automation requires higher skill levelBest for Grades 11 and 12.
![Page 30: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/30.jpg)
Baltimore Section
THE CHALLENGE EVENT
![Page 31: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/31.jpg)
Baltimore Section
![Page 32: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/32.jpg)
Baltimore Section
![Page 33: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/33.jpg)
Baltimore Section
![Page 34: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/34.jpg)
Baltimore Section
![Page 35: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/35.jpg)
Baltimore Section
![Page 36: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/36.jpg)
Baltimore Section
![Page 37: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/37.jpg)
Baltimore Section
THE JUDGES
![Page 38: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/38.jpg)
Baltimore Section
![Page 39: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/39.jpg)
Baltimore Section
GETTING STARTED
Determine if you see a need. Plan to start with a 2-leg Robot -
about 70% of the our teams do that. If teacher and students enjoy the
experience, consider upgrading the following year.
Link with local IEEE section to obtain kits.
![Page 40: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/40.jpg)
Baltimore Section
GETTING STARTED
A 2-leg Robot requires one basic kit, a 4-leg Robot requires 2 kits.
Each kit contains a large plastic bag, and 2 small plastic bags. The large bag contains most of the parts for the body of the robot, the small bags contain the parts for the two Control units.
![Page 41: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/41.jpg)
Baltimore Section
GETTING STARTED
Read the instructions. Start with the wood block - probably
the toughest part of the project, and it gets students using tools and overcoming problems.
The motto needs to be: “Measure twice, cut once!”
![Page 42: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/42.jpg)
Baltimore Section
MANUAL ROBOT KIT
A
![Page 43: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/43.jpg)
Baltimore Section
MANUAL ROBOT KIT
![Page 44: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/44.jpg)
Baltimore Section
AUTOMATION KIT
![Page 45: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/45.jpg)
Baltimore Section
AUTOMATION KIT
GH
![Page 46: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/46.jpg)
Baltimore Section
OBTAINING KITS Kits should be obtained through your
local IEEE section - contact them.There may be discounts or grants.
Kits can be obtained directly from us:Neville Jacobs, [email protected] or 410-653-4176.
Schools located outside of the USA may wish to consider building their own kits.
![Page 47: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/47.jpg)
Baltimore Section
WHAT IS IEEE It’s the largest technical society in the
world. It stands for the Institute of Electrical and
Electronic Engineers. Has initiated this project as a means of
encouraging students to become engineers. It’s a non-profit project.
Visit our web-site: www.robotchallenge.com
![Page 48: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/48.jpg)
Baltimore Section
FURTHER INFORMATION
If not in the USA, talk to us if you or your local IEEE section would like to consider building your own kits. A limited number of parts will be needed from the US, and these can be obtained through a distributor.
![Page 49: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/49.jpg)
Baltimore Section
PARTS YOU COULD PROVIDE LOCALLY(AS WELL AS WOOD BLOCK & PLYWOOD)
![Page 50: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/50.jpg)
Baltimore Section
PARTS OBTAINABLE FROM DISTRIBUTOR(ALSO THREADED RODS, MOTORS & TUBING)
![Page 51: Baltimore Section The Robot Challenge An Affordable hands-on Engineering Experience for High School students March 24 2006.](https://reader030.fdocuments.net/reader030/viewer/2022032414/56649ef55503460f94c081b9/html5/thumbnails/51.jpg)
Baltimore Section
Conclusion
We thank you for your attention, and hope you will consider this project for your students.
Please note that we are not in the business of selling kits - we are promoting a means of inspiring students to get acquainted with Engineering.