Ball Valves - processandsteam.comprocessandsteam.com/PSSpdfs/Flow+BallValveBrochure2012.pdf- NACE...
Transcript of Ball Valves - processandsteam.comprocessandsteam.com/PSSpdfs/Flow+BallValveBrochure2012.pdf- NACE...
B Series 1, 2, 3 PC Ball Valves Part Numbering System ...............................3 B01: 2 PC, 1000 WOG, 316SS ...................................................................................... 4 B02: 2 PC, 2000/1500 WOG, 316SS ............................................................................. 4 B03: 2 PC, 1000 WOG, 316SS Direct Mount ................................................................. 5 B04: 3 PC, 1000 WOG, 316SS, Screwed Ends ............................................................. 5 B04S: 3 PC, 1000 WOG, 316SS, Socket Weld Ends ....................................................... 5 B05: 3 PC, 1000 WOG, 316SS, Direct Mount, Screwed Ends ....................................... 6 B05S: 3 PC, 1000 WOG, 316SS, Direct Mount, Socket Weld Ends ................................ 6 B05TC: 3 PC, 1000 WOG,316SS, Direct Mount, Tri-Clamp Ends ...................................... 6 B05TO: 3 PC, 1000 WOG, 316SS, Direct Mount, Tube-Ends ............................................ 7 B06: 1 PC, 2000 PSI, Carbon Steel/Barstock ................................................................ 7 B07L: 3 PC, 1000 WOG, 316SS, 3 way, L port ................................................................ 8 B07T: 3 PC, 1000 WOG, 316SS, 3 way, T-port ................................................................ 8 B11: 2 PC, 2000/1500 WOG, Carbon Steel ................................................................... 8 BT3/BT6: 3 PC, 3000/6000 PSI, Carbon Steel ...................................................................... 9
Z Series Floating Flanged Ball Valves Part Numbering System .................. 10 Z Series Pressure & Temperature Charts ................................................................................ 10 150# RF Flanged ZF1 Full Port Direct Mount SS ............................................................................... 11 ZF1 Full Port Carbon Steel & Low Temp ................................................................ 12 ZR1 Reg Port Carbon Steel & Low Temp .............................................................. 13 300# RF Flanged ZF3 Full Port Carbon Steel, Low Temp & SS ......................................................... 14 ZR3 Reg Port Carbon Steel & Low Temp .............................................................. 15 600# RF Flanged ZF6 Full Port Carbon Steel & Low Temp ................................................................ 16 ZR6 Reg Port Carbon Steel & Low Temp .............................................................. 17
T Series Flanged Trunnion Ball Valves Part Numbering System ................ 18 T Series Pressure & Temperature Charts ................................................................................. 18 TSeriesTrunnionBallValvesFeatures&Specifications ........................................................ 19 T Series General Dimensionsional Chart ................................................................................. 20
Additional Information Automation ............................................................................................................................... 22 Terms and Conditions .............................................................................................................. 24
Table of Contents
Page 2SizesandSpecificationsshownaresubjecttochangewithoutnotice.
Page 3SizesandSpecificationsshownaresubjecttochangewithoutnotice.
1 = Valve Size02 = 1/4”03 = 3/8”05 = 1/2”07 = 3/4”10 = 1”12 = 1-1/4”15 = 1-1/2”20 = 2”25 = 2-1/2”30 = 3”40 = 4”
2 = Valve SeriesB01: 2 PC, 1000 WOG, 316SS B02: 2 PC, 2000/1500 WOG, 316SS B03: 2 PC, 1000 WOG, 316SS Direct Mount B04: 3 PC, 1000 WOG, 316SS, Screwed EndsB04S: 3 PC, 1000 WOG, 316SS, Socket Weld Ends B05: 3 PC, 1000 WOG, 316SS, Direct Mount, Screwed Ends B05S: 3 PC, 1000 WOG, 316SS, Direct Mount, Socket Weld Ends B05TC: 3 PC, 1000 WOG,316SS, Direct Mount, Tri-Clamp Ends B05TO: 3 PC, 1000 WOG, 316SS, Direct Mount, Tube-Ends B06: 1 PC, 2000 PSI, Carbon Steel/Barstock B07L: 3 PC, 1000 WOG, 316SS, 3 way, L port B07T: 3 PC, 1000 WOG, 316SS, 3 way, T-port B11: 2 PC, 2000/1500 WOG, Carbon Steel BT3/BT6: 3 PC, 3000/6000 PSI, Carbon Steel
1 2
B Series 1, 2, 3 PC Ball Valve Part Numbering System
Pressure rating: - 1000 psi (69 Bar)
WOG for 1/4” to 2”Features:- Investment Cast Body & End- Blow-out proof stem- Full Port- FNPT threaded on both ends- Material: ASTM A351-CF8M- NACE MR0175- Locking Handle
Page 4SizesandSpecificationsshownaresubjecttochangewithoutnotice.
Pressure rating: - 2000 psi (137.8 Bar) WOG
for 1/4” to 2” - 1500 psi (89.6 Bar) WOG for 3”Features:
- Investment Cast Body and Ends- Blow-out proof stem / Full Port- FNPT threaded on both ends- Locking Handle- Material: ASTM A351-CF8M- NACE MR0175*Note: available in Carbon Steel as model B11 on page 8
2-PC Full Port SS 2000 PSI Ball Valve B02
2-PC Full Port SS 1000 PSI Ball Valve B01
No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Qty
1
1
1
2
1
1
1
2
1
1
1
1
1
1
Qty
1
1
1
2
1
1
1
2
1
1
1
1
1
1
Parts
Body
End
Ball
Ball Seat
Joint Gasket
Stem
Thrust Washer
Stem Packing
Gland Nut
Handle
Spring Washer
Stem Nut
Handle Sleeve
Lock Device
Parts
Body
End
Ball
Ball Seat
Joint Gasket
Stem
Thrust Washer
Stem Packing
Gland Nut
Handle
Spring Washer
Stem Nut
Handle Sleeve
Lock Device
Material
ASTM-CF8M-A351
ASTM-CF8M-A351
ASTM-CF8M-A351
15% R-PTFE
PTFE
AISI 316
PTFE
PTFE
AISI 304
AISI 304
AISI 304
AISI 304
Vinyl Grip
AISI 430
Material
ASTM-CF8M-A351
ASTM-CF8M-A351
ASTM-CF8M-A351
15% R-PTFE
PTFE
AISI 316
PTFE
PTFE
AISI 304
AISI 304
AISI 304
AISI 304
Vinyl Grip
AISI 304
Size
1/4”
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
35
35
47
64
90
117
156
217
7
7
15
45
65
125
175
380
0.21
0.22
0.29
0.42
0.71
1.06
1.68
2.71
L
50
50
60
65
80
92
105
125
H
48
48
52
61
65
79
83
97
W
91
91
91
111
111
154
154
192
S
16.5
16.5
16.5
20
23.5
23.5
25.5
25.5
S1
10.2
10.2
10.2
13.5
16
16
17
17
X
5
5
5
6.5
8
8
9
9
N
12.5
12.5
12.5
21
22.5
23.5
23.5
23.5
P
28.5
28.5
28.5
34.8
34.8
38.1
38.1
38.1
BL
5/16”
5/16”
5/16”
3/8”
7/16”
7/16”
1/2”
1/2”
11.6
12.5
15
20
25
32
38
50
dia(mm)
Torque(in-lbs)
CVFactor
WtKwg
1/4”
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
3”
Size dia(mm) L H X BL CV
FactorTorque
in-lbWtKgW
11.6
12.7
15
20
25
32
38
50
80
44.5
44.5
57
65
76
87.5
102
123
184
51
51
53
59.5
73
79
90.5
98.8
142.5
95
95
95
10
135
135
165
165
215
5
5
5
6.5
8
8
9
9
12
5/16”
5/16”
5/16”
3/8”
7/16”
7/16”
1/2”
1/2”
3/4”
6.6
7.9
11.2
21
35
57
80
148
415
35
35
47
64
90
117
156
217
651
0.194
0.205
0.285
0.456
0.764
1.163
1.870
3.126
9.79
Pressure rating: - 1000 psi (69 Bar) WOG for 1/4” to 2”Features:- Investment Cast Body and Ends- Blow-out proof stem / Full port- Direct Mounting Pad for ISO Std 5211- FNPT threaded on both ends- Material: ASTM A351-CF8M (316SS)- NACE MR0175
* See Page 22 for Actuation
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 5
2-PC Full Port SS Ball Valve - Direct Mount* B03
Pressure rating: - 1000 psi (69 Bar) WOG for 1/4” to 4”Features:- Investment Cast Body & Ends - Blow-out proof stem- Full port- FNPT threaded on both ends for B04- Socket Weld on both ends for B04S- Locking Handle- Material: ASTM A351-CF8M (316SS)
3-PC Full Port SS 1000 PSI Ball Valve B04/B04S
No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
Parts
Body
Ends
Ball
Stem
Ball Seat
Gasket
Stem Packing
Thrust Washer
Stem Packing
Belleville Washer
Thrust Washer
O-Ring
Locking Washer
Stem Nut
Handle
Handle Nut
Handle Cover
Material
ASTM-A351 Gr. CF8M
ASTM-A351 Gr. CF8M
ASTM-A351 Gr. CF8M
316SS
15% RTFE
15% RTFE
15% RTFE
15% RTFE
304SS
SUS 304-USP
PTFE + 25% Carbon
Viton
304SS
304SS
304SS
304SS
Vinyl Grip
1/2”
3/4”
1”
1-1/2”
2”
Size Torquein-lbsISO 5211dia
(mm) L F M D H D1 S A Cv WtKg
15
20
25
38
50
65.3
77.3
88.7
109
125.3
6
7.5
7.5
7.5
9.5
85
110
180
315
450
9
9
11
14
14
72.85
81.8
90.45
114.7
124.0
112
112
136
197.9
197.9
8.5
8.5
11.4
14
13.7
36.95
45
53.45
74.75
83.5
15
45
65
175
380
0.46
0.81
0.96
2.3
2.3
7.5
9.5
9.5
9.5
11
42F0450
F0550
F0550
F0570
F07
50F0570
F0770
F0770
F07102F10
No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
Qty
1
1
1
2
1
1
1
2
1
1
1
1
1
1
4-6
4-12
4-12
Parts
Body
End
Ball
Ball Seat
Joint Gasket
Stem
Thrust Washer
Stem Packing
Gland Nut
Handle
Stem Washer
Stem Nut
Handle Sleeve
Lock Device
Bolt
Spring Washer
Hex Nut
Material
ASTM-CF8M-A351
ASTM-CF8M-A351
ASTM-CF8M-A351
15% RTFE
15% RTFE
AISI 316
PTFE
PTFE
AISI 304
AISI 304
AISI 304
AISI 304
Vinyl Grip
AISI 304
AISI 304
AISI 304
AISI 304
1/4”3/8”1/2”3/4”1”
1-1/4”1-1/2”
2”2-1/2”
3”4”
Size L H W B D S CvFactor
WtKg
dia(mm)11.612.71520253238506580
100
5454
61.571
83.597
110.5129
171.5200252
515155
58.573
78.590.599127136172
848484110135135165165215215325
1212.515.820.926.635.0540.952.56982106
18182228344450
61.57690115
14.117.621.727.233.942.648.761.176.989.8115.4
10102650681201703605109001250
0.340.340.460.621.961.49
23.126.510.420.2
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 6
Pressure rating: - 1000 psi (69 Bar) WOG for 1/4” to 4”High Cycle, Live Loaded, Triple Stem Seal comprising of:- Carbon Filled PTFE Wedge Ring Thrust Washer and Viton O-Ring- 15% RTFE Chevron packing- Live loaded Belleville Washers- Packing Nut Mechanically Locked to StemFeatures:- Investment Cast Body & Ends - Blow-out proof stem - Full port- Direct Mounting Pad for ISO Std 5211- FNPT threaded on both ends on B05- Socket weld ends on B05S- Material: ASTM A351-CF8M (316SS) and 316LSS ends on Socket Weld
* See Page 22 for Actuation
3-PC Full Port SS Ball Valve - Direct Mount* B05* Threaded (B05), Socket Weld (B05S), and Tri-Clamp (B05TC) ends
B05/B05S
B05TC
No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
Qty
1
2
1
1
2
1
1
1
1
1
4-6
4-6
4-6
1
1
1
1
1
1
1
1
Parts
Body
Ends
Ball
Stem
Seat
Stem Packing
Washer
Thrust Washer
Belleville Washer
Stem Nut
Bolts
Spring Washer
Bolts Nuts
Stem Ring
O-Ring
Stopper Washer
Square
Handle
Handle Nut
Stopper Pin
Handle Sleeve
Material
ASTM-A351 Gr. CF8M
ASTM-A351 Gr. CF8M
ASTM-A351 Gr. CF8M
SS 316
15% RTFE
25% CTFE
SS 304
PTFE +25% Carbon
SUS 304-CSP
SS 304
SS 304
SS 304
SS 304
PTFE +25% Carbon
VITON
SS 304
SS 304
SS 304
SS 304
SS 304
Vinyl
1/2”
3/4”
1”
1-1/2”
2”
3”
4”
Size d L F M ISO 5211 Torquein-lbs D H D1 S A Cv Wt
Kg
15
20
25
38
50
80
100
63.5
72.5
81
108
121.5
190
225
6
7.5
7.5
7.5
9.5
11
11
7.5
9.5
9.5
9.5
11
14.3
14.3
42F0450
F0550
F0550
F0570
F07102F10102F10
50F0570
F0770
F0770
F07102F10125F12125F12
85
110
180
315
450
680
1190
9
9
11
14
14
17
22
72.95
80.8
90.45
115.25
124.0
208.5
216.7
112
112
136
197.9
197.9
264
325
8.5
8.5
11.4
14
13.7
18
23
36.95
45
53.45
74.75
83.5
118.25
153.75
26
50
68
170
360
900
1250
0.6
0.7
1.03
2.5
3.4
11.2
22
*CF3M for SW
Pressure rating: 2000 psi (138 Bar)Features:- NACE MR0175- Blow-out proof stem- FNPT threaded on both ends- Body material: ASTM A105N Carbon Steel
Page 7SizesandSpecificationsshownaresubjecttochangewithoutnotice.
* See page 22 for Actuation
1-PC Reg Port Carbon Steel 2000 PSI Ball Valve B06
Pressure rating: - 1000 psi (69 Bar) - WOG for 1/2” to 4”High Cycle, Live Loaded, Triple Stem Seal comprising of:- Carbon Filled PTFE Wedge Ring Thrust Washer and Viton O-Ring- 15% RTFE Chevron packing- Live loaded Belleville Washers- Packing Nut Mechanically Locked to StemFeatures:- Investment Cast Body & Ends - Blow-out proof stem- Full port- Direct Mounting Pad for ISO Std 5211- Tube Ends- Material: ASTM A351-CF8M (316SS)
3-PC Full Port SS Ball Valve - Direct Mount* B05TONo
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
Parts
Body
Ends
Ball
Seat
Gasket
Thrust Packing
Stem Packing
Ring
Belleville Washer
Stem Nut
Lock Washer
Ring
Handle Nut
Stop Pin
Handle
Handle Sleeve
Stem
Spring Washer
Bolt Nut
Bolt
O-Ring
Material
AISI 304/316/316L
AISI 304/316/316L
AISI 304/316/316L
PTFE/TFM 1600
PTFE
PTFE
PTFE
AISI 304
AISI 304
AISI 304
AISI 304
AISI 304
AISI 304
AISI 304
AISI 304
Plastic
AISI 316
AISI 304
AISI 304
AISI 304
Viton
Torquein-lbs
ISO5211
diamm D L H M B1 B2 K D1 E D2 H1 A C1 C2 X A1 L1Size
Size A B C D E F Wt (kg) Cv
1/2”3/4”1”
1-1/2”2”
2-1/2”3”4”
1/4”3/8”1/2”3/4”1”
1-1/4”1-1/2”
2”
6179
108110122145148148
29.534.5636568
79.584
92.5
41.344
57.265.171
92.198.4114.3
57.29.012.515202532
21232935415557
73.5
24.126.433.340.347.263.465.784.7
0.210.220.290.420.711.061.682.71
1.53.55.71016254062
99111414171722
36364250507070102
4242507070102102125
99111414171722
25.425.450.450.463.877.691.0119.0
2626344343535356
1821252825354337
66688101012
6681010121214
9010014024048065011501400
15.520.629.039.042.048.048.734.0
42445251
58.5///
137147168186223
///
143143160187187310310400
12.719.125.438.250.863.576.2100.6
15202540506580
100
9.515.922.235.047.660.373.097.4
89101114140156197229241
37.047.057.278.286.2109.2117.7141.2
F03-F04
F03-F04
F04-F05
F05-F07
F05-F07
F07-F10
F07-F10
F10-F12
No
01
02
03
04
05
06
07
08
09
10
11
12
Parts
Body
Insert
Ball
Seat
Stem
Thrust Washer
Stem Seal
Handle
Handle Sleeve
Nut
Washer
Spring Washer
Material
A108
A108
AISI 316
PTFE+15% G/F
AISI316
PTFE
PTFE
AISI 304
Vinyl Grip
304 SS
WCB
304 SS
Pressure rating: 1000 psi (69 Bar) WOG for 1/4” to 2”
High Cycle, Live Loaded, Triple Stem Seal comprising of:
- Carbon Filled PTFE Wedge Ring Thrust Washer
- Viton O-Ring- 15% RTFE Chevron packing- Live loaded Belleville Washers- Packing Nut Mechanically Locked to StemFeatures:- Anti-static device- L-port & T-port- Blow-out proof stem- FNPT end connections- Locking Handle- Material: ASTM A351 GR.CF8M
(316SS)
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 8
Pressure rating: - 2000 psi (137.8 Bar) WOG
for 1/4” to 2” - 1500 psi (103.4 Bar) WOG
for 3”Features:- Blow-out proof stem- Full Port- FNPT threaded on both ends- Locking Handle- Carbon Steel Body and Ends- Material: ASTM A216-WCB- NACE MR0175*Note: available in Stainless Steel as
model B02 on page 4
3-way Reg. Port SS Ball Valve - Direct Mount* B07L/T
2-PC Full Port Carbon Steel Ball Valve B11
* See page 22 for ActuationNo
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
Parts
Body
Ends
Seat
Ball
Stem
Gasket
Thrust Washer
Stem Packing
Gland
Belleville Washer
Stem Nut
Handle
Handle Nut
End Cap
Gasket
Handle Sleeve
Locking Washer
Thrust Washer
O-Ring
Material
ASTM-A351 Gr. CF8M
ASTM-A351 Gr. CF8M
15% RTFE
ASTM-A351 Gr. CF8M
SS 316
15% RTFE
PTFE + 25% Carbon
15% RTFE
SS 304
SUS 304-CSP
SS 304
SS 304
SS 304
ASTM-A351 Gr. CF8m
15% RTFE
Vinyl Grip
SUS 304-CSP
PTFE + 25% Carbon
Viton1
234567
8
9101112
13
14
15
1617
18
19
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 9
Pressure rating: 3000 psi (BT3) / 6000 psi (BT6)Specifications:- Designed to ASME B16.34 - NPT & SW to ASME B16.11 - Tested to API 598 -API607firesafe -NACE MR0175 -CRN
Standard Features: - Available in full port & reg port- Forged Steel Body- Locking Lever - Blowout proof stem- Antistatic device- Mounting pad
3-PC Threaded Body 3000/6000 PSI Ball Valve BT3/BT6
* Denotes standard stock trim
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 10
150# & 300# 600#
Z Series Floating Flanged Ball Valves Part Numbering System
1 = Code & ClassZR1 = Reduced port class 150ZR3 = Reduced port class 300ZR6 = Reduced port class 600ZF1 = Full port class 150ZF3 = Full port class 300ZF6 = Full port class 600
2 = Size050 = 1/2”075 = 3/4”001 = 1”150 = 1-1/2”002 = 2”250 = 2-1/2”003 = 3”004 = 4”006 = 6”008 = 8”
3 = Type A = Floating ball split body B = Floating ball unibody4 = Body Material 1 = ASTM A216 WCB 2 = ASTM A352 LCC 3 = ASTM A351 CF8M 4 = A105N 5 = A350 LF2
5 = End Connection F=Raisedfaceflanged* R=Ringjointflangedends B = Butt-welded ends6 = Trim Material 1 = Body + 3ENC 2 = 304SS 3 = 316SS *7 = Seat material P = PTFE R = RTFE * N = Nylon K = PEEK D = Devlon
8 = Operator H = Handle/Lever G = Gear Operator B = Bare Stem9 = Special Requirements 00 = Standard Requirement
1 2 3 4 5 6 7 8 9
Z Series Pressure & Temperature Charts
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 11
Features:-Fullbore,2piecebodyfloatingball- ISO Mounting Pad, direct mounting to actuator- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated
150# Full Port Direct Mount SS ZF1
Specifications:- Designed according to ASME/ANSI Class 150 - B16.34- Face to Face per ASME/ANSI B16.10 Long Pattern- Flanges designed per ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598
* See page 22 for Actuation
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 12
150# Full Port Carbon Steel & Low Temp ZF1
Features:-Fullbore,2piecebodyfloatingball- ISO Mounting Pad- Cavity relieving seats, anti-static device- Blow-out proof stem- Lever operated 2”-6”, Gear operated 8”
Specifications:- Fire-safe to API-607, latest Ed. - Designed to ASME/ANSI Class 150-B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges to ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598
GEAR
LEVER
Features:- Reduced bore, 1 piece unibody floatingball- ISO Mounting Pad- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 13
Specifications:- Fire-safe to API-607, latest Ed. - Designed to ASME/ANSI Class 150-B16.34- Face to Face to ASME/ANSI B16.10 Short Pattern - NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598
150# Reg. Port Carbon Steel & Low Temp ZR1
O-Ring
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 14
Features:-Fullbore,2piecebodyfloatingball- ISO Mounting Pad- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated 2”-6”, Gear operated 8”
Specifications:- Fire-safe to API-607, latest Ed. - Designed to ASME/ANSI Class 300-B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges designed per ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598
300# Full Port Carbon Steel, Low Temp & SS ZF3
LEVER
GEAR
Gland
Antistatic
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 15
Features:- Reduced bore, 1 piece unibody floatingball- ISO Mounting Pad- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated
Specifications:- Fire-safe to API-607, latest Ed. - Designed according to ASME/ANSI Class 300 - B16.34- Face to Face per ASME/ANSI B16.10 Short Pattern- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598
300# Reg. Port Carbon Steel & Low Temp ZR3
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 16
Features:- Full bore, 2 piece split body floatingball- ISO Mounting Pad- Blow-out proof stem- Anti-static device- Lever operated
Specifications:- Fire-safe to API-607, latest Ed.- Designed to ASME/ANSI Class 600 - B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges to ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598
600# Full Port Carbon Steel & Low Temp ZF6
Antistatic
LEVER
GEAR
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 17
Features:- Reduced bore, 2 piece split body floatingball- ISO Mounting Pad- Blow-out proof stem- Anti-static device- Lever operated 2”-4”, Gear operated 6”
Specifications:- Fire-safe to API-607, latest Ed.- Designed to ASME/ANSI Class 600 - B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges to ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598
600# Reg. Port Carbon Steel & Low Temp ZR6
Antistatic
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 18
T Series Flanged Trunnion Ball Valve Part Numbering System
T Series Pressure & Temperature Charts
2 95 843 761
1 = Port & ClassTR1 = Reduced port class 150TR3 = Reduced port class 300TR6 = Reduced port class 600TR9 = Reduced port class 900TR15 = Reduced port class 1500TR25 = Reduced port class 2500TF1 = Full port class 150TF3 = Full port class 300TF6 = Full port class 600TF9 = Full port class 900TF15 = Full port class 1500TF25 = Full port class 2500
2 = Size002 = 2”003 = 3”004 = 4”006 = 6”008 = 8”010 = 10”012 = 12”014 = 14”016 = 16”018 = 18”020 = 20”024 = 24”026 = 26”028 = 28”030 = 30” 032 = 32”034 = 34”036 = 36”040 = 40”042 = 42”
3 = Type T = 3 Piece Split Body S = 2 Piece Split Body W = Welded Body4 = Body Material 1 = ASTM A216 WCB (-29C) 2 = ASTM A352 LCC (-46C) 3 = ASTM A351 CF8M (-196C) 4 = ASTM A105N (-29C) 5 = ASTM A350 LF2 (-46C) 6 = ASTM 182 F316 (-196C) 7 = DUPLEX 22CR5 = End Connection F = Flanged Raised Face J = Flanged RTJ B = Butt Weld End G = Weld X RF H = Weld X RTJ P = Weld W/PUPS X = GRAYLOC
6 = Trim Material 1 = Body + 3ENC 2 = 304SS 3 = 316SS 4 = 410SS 5 = DUPLEX 22CR7 = Seat Material P = PTFE R = RTFE N = Nylon K = PEEK D = Devlon M = Metal x Metal8 = Operator L = Handle/Lever G = Gear Operator B = Bare Stem C = Chain Wheel9 = Special Requirements 00 = Standard Requirement
Compliance and SpecificationsISO 14313:2007 / API 6DISO 9001-2008 Registered Quality System API 608 / API 598 Firesafe to API 607 ASME B16.34, B16.5, B16.10 CSA Z245.15 Steel Valves NACE MR0175 / ISO 15156 Compliance
FeaturesDesigns Available - Two piece cast design or three piece forged design available.Double Block & Bleed - Independent spring loaded upstream and downstream seats and body bleed ensure suitability for use in double block & bleed service. Antistatic Design - Antistatic design to ensure electrical continuity between stem, ball and body.Emergency Seat and Stem Seal Injection (varies on size) -Incaseofunforeseensealdamageorvalveleakagewhileinservice,injectionfacilitiesareavailableonthevalveswhenacriticalsealisdemandedand there is no time to service or shut down the facility. Automatic Body Cavity Relief - Trunnion Mounted Ball Valves are protected from thermal expansion and body cavity over pressurization due to spring loaded seats which automatically relieve pressure to the down stream side of the body cavity. In addition, all valves come with a manual safe relieving bleed valve. Seat Design -Theseatsarefreefloatingalongthevalveaxis.Atlowpressure,ballandseatsealingismaintainedbypre-loadedseatsprings.Highpressuresealingis maintained by the line pressure acting on the differential area of the seats.
•Other materials available upon request•Materials shown are general materials of construction for 2 piece or 3 piece
Trunnion Ball Valves•We reserve the right to substitute materials listed above with alternate approvedmaterialforspecificserviceconditions
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 19
T-Series Trunnion Ball Valves
* Standard Inventory Trim** Indicated parts included in Minor Repair Kit
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 20
T Series Trunnion General Dimensional Data
SizesandSpecificationsshownaresubjecttochangewithoutnotice. Page 21
T Series General Trunnion Dimensional Data
* Actuator sized for liquid service up to 500 psig differential line pressure using 80 psig instrument air. ** Actuator sizing torques up to 500 psig DP, Water - 1.0, Oil - 0.8, Gas Wet (Steam) - 1.0, Gas Dry - 1.3.*** Add 20% on torque values for 3-way B07 series valve.**** For high or low temperature applications consult supplier for special seal kits.
Page 22SizesandSpecificationsshownaresubjecttochangewithoutnotice.
For ISO Direct mount Ball Valves Only (B03, B05/5S/5TC/5T0, B07L/T & ZF1 SS Only)*
Actuation Selection Chart
Your local Sales Representative:
Contact Information
Flow+ Ball Valve Brochure 08/2012
Limited Warranty
ValvSource Equipment Limited (herein refered to as “ValvSource”) is pleased to advise its customers (“Purchaser”) of Flow+ brand products (“Product” or “Products”) that the manufacturer (“Manufacturer”) warrants its Products against defects in material and workmanship (“Defects”) for a period of eighteen (18) months from shipment or one (1) year from installation (“Warranty Period”).
PurchaseracknowledgesthattheProductsareprovidedtothePurchasersubjectonlytothelimitedwarrantiesprovidedbythemanufactureroftheProductsandaresubjecttoalloftheconditions,limitationsandexclusionssetouttherein,allofwhicharehereby accepted by the Purchaser.
Extent of Remedy. Where ValvSource is advised in writing of Defects within the Warranty Period, Manufacturer will be deemed to have received notice of the defect and Manufacturer will, at its option, replace or recondition the Product without charge.WhereareplacementorreconditionedProductisprovidedduringtheWarrantyPeriod,thatProductshallbesubjecttothe same warranty for the unexpired portion of the original Warranty Period. This remedy shall constitute the exclusive remedy available to Customers for defective Products.
Limitations. Neither ValvSource nor Manufacturer shall be liable for any incidental, consequential or other damages, costs or economic losses, including, without limitation, any resulting from labour charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemicals, acts of God, or circumstances that are not controllable or reasonably foreseeable by either Manufacturer or ValvSource.
Invalidation of Warranty. The warranty exclusions include, without limitation, (I) any defects caused by faulty installation performed by Purchaser or third parties, (II) any damage caused by the contractors or tradesman of the Purchaser, (III) any damage caused by improper use or misuse, including exposure to excessive temperatures, moisture or cleaning agents and solvents and (IV) any damage caused during transportation or improper storage. All claims received by ValvSource beyond the Warranty Period are invalid and shall not be accepted.
Disclaimer. Except for the express written warranty contained herein, neither Manufacturer nor ValvSource makes any other warranty, condition, guarantee or indemnity, express or implied, statutory or otherwise, regarding the Products INCLUDING WITHOUT LIMITATION, TO THE EXTENT PERMITTED BY LAW, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. All other warranties, conditions guarantees and indemnities regarding any Products are hereby disclaimed, excluded and overridden.
Further Warranty Information. For complete detailed terms of sale and warranty information on all products distributed by ValvSource, including brands from third party manufacturers distributed by ValvSource, please visit: http://www.valvsource.com. Please refer to terms and conditions section.
Flow+ is a registered trademark