Ball Reaci on Guide 2011 Lr
-
Upload
michael-sezenias -
Category
Documents
-
view
219 -
download
2
description
Transcript of Ball Reaci on Guide 2011 Lr
-
virtual gravity NaNO4000-grit Factory Finish
victOry rOad1500-grit Polished
rEigN SuPrEmE1500-grit Polished
2FaSt1500-grit Polished
2FuriOuS2000-grit Factory Finish
Natural2000-grit Factory Finish
aNarchy1500-grit Polished
PrOdigy4000-grit Factory Finish
victOry rOad SOlid3000-grit Factory Finish
hy-rOad1500-grit Polished
marvEl PEarl1500-grit Polished
Black / SilvEr1500-grit Polished
iNdigO / viOlEt1500-grit Polished
OraNgE / PurPlE1500-grit Polished
marvEl2000-grit Factory Finish
Natural PEarl4000-grit Factory Finish
PiNk / PurPlE1500-grit Polished
kONa BluE / SilvEr1500-grit Polished
Black / tEal1500-grit Polished
hEa
vy
Oil
mEd
ium
hEa
vy
Oil
mEd
ium
Oil
mEd
ium
lig
ht
Oil
lig
ht
Oil
On each of the four sides, apply moderate pressure while continuously moving the pad from the top to middle of the ball in an up and down motion. Keep the surface moist by spraying with water periodically throughout the resurfacing process.
PrOduct aNd maiNtENaNcE guidE rESurFacE tO thE OrigiNal FactOry FiNiSh uSiNg a surface factoryrESurFacE tO thE OrigiNal FactOry FiNiSh uSiNg a
ball spinner
PiNk / PurPlE
2FaSt
victOry rOad
marvEl PEarl
virtual gravity NaNO
Natural PEarl
rEigN SuPrEmE
aNarchy
Black / SilvEr
stormbowling.com
4000-grit factory finish1. 500-grit Abralon Sand firmly for 30 seconds on all four sides.2. 2000-grit Abralon Sand lightly for 10 seconds on all four sides.3. 4000-grit Abralon Sand lightly for 5 seconds on all four sides.
1500-grit polished factory finish1. 500-grit Abralon Sand firmly for 30 seconds on all four sides.2. 1000-grit Abralon Sand lightly for 20 seconds on all four sides.3. 2000-grit Abralon Sand lightly for 20 seconds on all four sides.4. 4000-grit Abralon Sand lightly for 20 seconds on all four sides.5. Storm Step Two Polish lightly for 15 seconds on each side.
Storm recommends using the suggested cleaner/polish daily. In addition, Storm recommends touching up the surface with only the final step every 20 games and resurfacing completely every 30-50 games.
1000-grit factory finish1. 360-grit Abralon Sand firmly for 30 seconds on all four sides.2. 1000-grit Abralon Sand lightly for 5 seconds on all four sides.
2000-grit factory finish1. 360-grit Abralon Sand firmly for 30 seconds on all four sides.2. 2000-grit Abralon Sand lightly for 10 seconds on all four sides.
PrOdigyvictOry rOad SOlid hy-rOad
3000-grit factory finish1. 500-grit Abralon Sand firmly for 30 seconds on all four sides.2. 3000-grit Abralon Sand lightly for 10 seconds on all four sides.
2FuriOuS
NaturaliNdigO / viOlEt OraNgE / PurlE
Black / tEal
4000-grit factory finish1. Sand 500 setting Set sanding time for two minutes.2. Sand 4000 setting Set sanding time for three minutes.
1500-grit polished factory finish1. Sand 500 setting Set sanding time for two minutes.2. Sand 1000 setting Set sanding time for one minute.3. Polish setting Set polishing time for two minutes.
Storm recommends using the suggested cleaner/polish daily. In addition, Storm recommends touching up the surface with only the final step every 20 games and resurfacing completely every 30-50 games.
1000-grit factory finish1. Sand 500 setting Set sanding time for two minutes.2. Sand 1000 setting Set sanding time for two minutes.
2000-grit factory finish1. Sand 500 setting Set sanding time for two minutes.2. Sand 2000 setting Set sanding time for three minutes.
3000-grit factory finish1. Sand 500 setting Set sanding time for two minutes.2. Sand 3000 setting Set sanding time for three minutes.
marvEl
kONa BluE / SilvEr
For best results, use a Storm Surface Factory or Surface Factory Pro machine to resurface your bowling ball.