Balance of 1st order review process

13
Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry Tallinn (Estonia), 26-27 May 2008 Carlo Trozzi Balance of 1st order review process Identify any remaining issues which need to be solved for acceptance. Define how these remaining issues must be addressed in order for the GB to be accepted (Distinguish between editorial issues and substance) Start the discussions about the need for long-term scientific improvements beyond this project (identify priority areas and funding opportunities) AGENDA

description

AGENDA. Balance of 1st order review process Identify any remaining issues which need to be solved for acceptance. Define how these remaining issues must be addressed in order for the GB to be accepted (Distinguish between editorial issues and substance) - PowerPoint PPT Presentation

Transcript of Balance of 1st order review process

Page 1: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

Balance of 1st order review process Identify any remaining issues which

need to be solved for acceptance. Define how these remaining issues must

be addressed in order for the GB to be accepted (Distinguish between editorial issues and substance)

Start the discussions about the need for long-term scientific improvements beyond this project (identify priority areas and funding opportunities)

AGENDA

Page 2: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

The reference: Guidebook (2006) or CEPMEIP (2004) are not acceptable, where is not possible to introduce original reference write something as “TFEIP or expert evaluation on available information” or similar

In some cases different technologies/abatement systems are defined introducing EFs for each technology (for example for Volume 2C) in some case new technologies/new products are introduced under abatement (for example for Volume 3). We think the approach must be unique!

Clearify the way to assign the interval confidence Clearify why some SNAP have no EFs

1st vs 2nd order draft evaluation & revision -general

Page 3: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

A.1.a Public electricity and heat productionthe 1st order tables was unclear and

unusable, the "interpretation" of the "old" GB EF is an unacceptable simplification

The EFs was clearly inadequate

A.1.b Petroleum refiningThe tables was unclear and unusable, the

only complete work by Concawe was not usedCONCLUSION: The chapter was unacceptable!FD accept all the EP suggestion but we don’t

have the time to review the chapters

1st vs 2nd order draft evaluation & revision -1

Page 4: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

A.2 Manufacturing industries and constr.Some general preliminary comment is

necessary. This section of the Guidebook and the related "old" chapter was the most critical ones. In the past the structure of the guidebook can give rise to double count of emissions. The new Guidebook have to resolve this problems, but this was not the case

We have two kind of technologies:the SNAP Group 0301 Combustion in boilers, gas turbines

and stationary the SNAP Groups 0302 Process furnaces without contact

and 0303 Processes with contact

1st vs 2nd order draft evaluation & revision - 2

Page 5: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

For the first group the conditions are very similar to 1.A.1. An very simple example is the following: in the paper industry the main emissions arise from drying processes in which water vapour is used; this vapour come from a boiler, so the emission from this boiler is very similar to emissions in 1.A.1. Where these emissions are allocated? The only "additional" non boilers emissions from 1.A.2 can be emissions from evaporation of organic substances used in paper manufacturing that can evaporate in the drying process. The ”FOD" Guidebook don't take into account these last and report EFs for combustion that can be different from EF in 1.A.1. Then we have a lot of similar cases for example Combustion in Food Industry, Mechanic Industry, ecc. What emissions factors? We need a specific subsection?

Next we have old SNAP 0302 and 0303 group and related new chapters.

1st vs 2nd order draft evaluation & revision - 3

Page 6: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

In these chapters must be inserted only emissions come from processes in which special condition or the contact between fuel and materials produces different combustion characteristics and different EFs: essentially process furnaces. For these applications, all the existing documentation (and for example BREF of the IPPC directive) reports EFs in g pollutants/kg product. Also statistical data are available for production and not for energy consumption of single product (for example are available sinter production and fuel consumption in iron & steel industry but not fuel consumption in sinter plant). If the fuel approach is mandatory then: 1. It's necessary to develop specific emission factors, only from fuel, not to copy "old" EF that derive from another approach (example US EPA approach, that take into account the overall process 2. Specific fuel consumptions in GJ/Mg of product MUST BE REPORTED. INFORMATION EXISTS AND CAN BE RETRIEVED IN IPPC BREF DOCUMENT.

1st vs 2nd order draft evaluation & revision - 4

Page 7: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

CONCLUSION: The chapter was unacceptable! The documentation from BREF, the about separation between combustion and processes and of use of product approach ignored.

FD accept all the EP suggestion but we don’t have the time to review the chapters

A.4.b.i Residential plantsThe tables contained a very large number of

emission factors quoted as Guidebook (2006) but with different values.

FD revise the EF, news one are choerent with old GB but some problems exhist with Turgogas and Stationary Engines in connection with 1A

1st vs 2nd order draft evaluation & revision - 5

Page 8: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

B.1.b Solid fuel transformationOK with scientific improv. (some minor corrections)

B.2.a.vi Geothermal energy extractionNEW emissions factors from Italy proposed

B.2 Industrial ProcessesGenerally acceptable without scientific improvem.

B.3 Product useGood, with scientific improv. Some integrations/

corrections needed

B.6 WasteGenerally acceptable but without scientific improv.

1st vs 2nd order draft evaluation & revision - 6

Page 9: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

Acceptance sheet (1)

CHAPTER Suggestion (a) Note (b) 1.A.1 Combustion in energy Conditionally accepted (1) 1.A.2 Combustion in Manufacturing Industries and Construction Conditionally accepted (1) 1.A.4 Small combustion Conditionally accepted (2)

(1) The EP agree with new structure. In principle the Expert Panel comments have been accepted. However, as we need some more weeks to verify the completly new EFs inserted in the chapters. Comments in two or three weeks!

(2) We agree about new structure of tables but need more time to review EFs combined with 1.a.1

Page 10: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

Acceptance sheet (2)

(3) Observation to 1st order draft don't taken into consideration: Concawe considered the methodology as obsolete! Replace all with the sentence "For depots of gasoline in refinery refer to Tier3"

(4) Osservation to 1st order draft don't taken into consideration. (5) Osservation to 1st order draft don't taken into consideration

Convert the data from g/kg pig iron in g/kg sinter using appropriate change factor to compare with "state of the art" EFs

(6) Osservation to 1st order draft don't taken into consideration YOU ACCEPTED TO USE BREF BUT NO CHANGE ARE MADE

1.B.2.a.v Distribution of oil products Conditionally accepted (3) 2.B Chemical Industry Conditionally accepted (4) 2.C.1 Iron and Steel Production Conditionally accepted (5) 2.C.2 Ferroalloys production Conditionally accepted (6)

Page 11: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

Acceptance sheet (3)

(7) No EFs Consultant say “Chapter needs to be discussed. Where to collect all this information? All relevant pollutants was moved to NE and the emission factors are deleted, since they're all wrong!”

(8) OLD - There is an emission factor of 200 kg/Mg for Leather Finishing from BREF that must be taken into account! Comment to Consultant Comment YES INSERT HERE (statistic given Mg of leather treated)

(9) New EF for VOC is unclear I ask to discuss in EP(10)The activity 030313 Asphalt Concrete Plants was expired from

new GB and I think must be inserted in a new or existing charter

2.E Production of POPs Conditionally accepted (7) 3.A Paint Application Conditionally accepted (8) 6.B Waste water handling Conditionally accepted (9)

Page 12: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

Acceptance sheet (4)CHAPTER Suggestion (a) Note (b) 1.A.3.e.i Pipeline compressors ACCEPTED (X) 1.A.4 Other Mobile ACCEPTED 1.B.1.a Coal Mining and Handling ACCEPTED 1.B.1.b Solid Fuel Transformation ACCEPTED 1.B.1.c Other fugitive emissions from solid fuels ACCEPTED 1.B.2.a.i, 1.A.2.b Exploration Production Transport ACCEPTED 1.B.2.a.iv Refining, Storage ACCEPTED 1.B.2.a.vi Geothermal energy extraction ACCEPTED 1.B.2.c Ve nting and flaring ACCEPTED 2.A.1 Cement production ACCEPTED 2.A.2 Lime production ACCEPTED 2.A.3 Limestone and Dolomite use ACCEPTED 2.A.4 Soda Ash production and use ACCEPTED 2.A.5 Asphalt roofing ACCEPTED 2.A.6 Road paving with asphalt ACCEPTED 2.A.7.a Quarrying and mining of minerals other than coal ACCEPTED 2.A.7.b Construction and demolition ACCEPTED 2.A.7.c Storage, handling and transport of mineral products ACCEPTED 2.A.7.d Other mineral production ACCEPTED 2.C.3 Aluminium production ACCEPTED

Page 13: Balance of 1st order review process

Task Force on Emission Inventory & Projection Expert Panel on Combustion and Industry

Tallinn (Estonia), 26-27 May 2008Carlo Trozzi

Acceptance sheet (5)CHAPTER Suggestion (a) Note (b) 2.C.5.a Copper Production ACCEPTED 2.C.5.b Lead Production ACCEPTED 2.C.5.c Nickel production ACCEPTED 2.C.5.d Zinc Production ACCEPTED 2.C.5.e Other metal production ACCEPTED 2.C.5.f Storage, handling and transport of metal products ACCEPTED 2.D.1 Pulp and paper ACCEPTED 2.D.2 Food and drink ACCEPTED 2.D.3 Wood processing ACCEPTED 3.B.1 Degreasing ACCEPTED 3.B.2 Dry Cleaning ACCEPTED 3.C Chemical products ACCEPTED 3.D.1 Printing ACCEPTED 3.D.2 Domestic solvent use ACCEPTED 3.D.3 Other product use ACCEPTED 6.A Solid Waste Disposal on Land ACCEPTED 6.C.a Clinical Waste Incineration ACCEPTED 6.C.b Industrial Waste Incineration ACCEPTED 6.C.c Municipal Waste Incineration ACCEPTED 6.C.d Cremation ACCEPTED 6.C.e Small scale waste burning ACCEPTED 7.A Other ACCEPTED