BAKERY SUPPLIES - BICO · excellent baking characteristics but is subject to erosion. Area of...

BAKERYSUPPLIES

EDITION NO. 9

www.bico-gmbh.de

TABLE OF CONTENTS

BACKBLECHEBAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION2

Page

4 About us

5 Advantages of BICO-products

6 Material and maintenance

9 Baking trays

Baking trays with 3-sided rim10 Pastry trays10 Baking trays

10 Perforated trays with 3-sided rim

11 Baking trays for cleaning machines, non-perforated 12 Baking trays for cleaning machines, perforated

13 Perforated trays stackable

Baking trays for instore baking ovens14 Instore baking-, perforated trays Stainless steel perforated trays for pretzel ware14 Stainless steel perforated trays Perforated trays with 3-sided rim and changeable foil15 PTFE-perforated trays Baguette trays with contour rim16 Baguette trays with rim 3 mm perforation16 Baguette trays with rim 2 mm fine perforation Baguette trays with no rim17 Baguette trays with no rim, 3 mm perforation17 Baguette trays with no rim, 2 mm fine perforation Baguette trays with flexible fiberglass fabric18 Baguette trays for systems Trays for baking systems19 System trays19 Hamburger tray 21 Baking tins (U.S.-sizes)

Baking tins22 Bread tins22 Toastbread tins23 Triangular tins24 Isolated tins24 Whole grain bread tins24 Baking tins

5 Rodon-Form units26 Stollen tins27 Tins for handmade stollen

Cake/Pizza trays28 Cake trays28 Cheese cake trays29 Pizza trays29 Savarin tray29 Cake trays flat/large30 Perforated cake trays Freezer trays/Presentation trays30 Freezer trays30 Presentation trays31 Sandwich holder Baking equipment31 Cream gateau rings32 Cream gateau bottoms32 Stollen ring 33 Whisks 34 SUPER-NOVA machine whisks35 Machine whisks and replacement wires36 Fax-order form 37 Transportation

Glazing tables/Freezer carts38 Glazing tables38 Freezer carts39 Freezer carts, Z-type40 Transportation carts Covers40 Covers Insuration appliances41 Cooling container „Extremo“ Tray and drying carts41 Tray carts Rack carts42 Rack carts47 Rack carts, Z-type48 Cake racks

BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION 3

TABLE OF CONTENTS

Page

Transportation46 Carts for ingredients47 Container carts47 Containers for ingredients48 Bread shelf cart48 Support racks48 Sack carts (handcart)49 Bread cart49 Fermentation carts49 Bake-through carts50 Tray carts50 Multi-servant, Z-type51 Transport cart for fermentation product supports51 Aluminium trolley

52 Wheels

53 Wheels54 Wheels for rack carts 56 Worktables Worktables57 Worktables59 Table cart59 Stainless steel shelf 59 Sinks59 Handwash sink combination60 Presentation cart60 Presentation shelf61 Belt conveyor worktable62 Hygienic workstations 62 Heating pan63 Glazing- and spraying station63 Immersion basin64 Cake ring tin rack, cauldron cart64 Wall rack

65 Foils, Textiles Permanent baking foils66 PTFE-permanent baking foils67 PTFE-permanent baking foils for hotplates68 PTFE-permanent baking foils self adhesive69 Glas fibre mesh, PTFE-coated

Page Inserts for tilting devices69 Fleece antibacterial70 PROFI-NET®, fungus (mould) free nets70 PROFI-NET® on roll71 Green polyester cloths71 Green polyester cloths on roll Sheets for lye treatment application72 Cotton-Polyester cloths72 Green polyester cloths73 PROFI-NET® sheets for lye treatment application73 Carry along sticks Velcro-/Fleece tapes73 Velcro-/fleece tapes Elastic coversheets for dough containers73 Cotton-polyester coversheets Cleaning and refitting of trays74 Complete or partial refitting Inserts for tilting trays76 Inserts without velcro76 Inserts with velcro

77 Trays for fermentation

Trays for fermentation78 Trays for fermentation, aluminium79 Trays for fermentation, measuring sheet 180 Trays for fermentation, measuring sheet 281 Trays for fermentation, measuring sheet 382 Measuring sheet for orders 83 Order form 84 Terms and conditions

ABOUT US

BACKBLECHE4

Dear customers,

three decades after the founding of our company we proudly present the no. 9 issue of our Bico catalogue.

What still proves true after all these years is that our deter-mination to stick with what is tried and true, combined with a spirit for innovation, has been and will continue to be a recipe for success.

• The purchase of a Trumpf laser-beam cutting machine has been saving us substantial third-party expenses as well as saving our customers from disproportional mark-ups. By performing laser cutting jobs for others we have managed to turn this capability into a sustained business segment. This enables us to develop and offer, hand in hand with our in-house tool shop, products of the highest quality without having to fear price comparisons.

• In matters of coating we are working with leading independent manufacturers who can draw from decades of experience.

• We have met the challenges of industrialized baking by em- barking on the flexible production of industry – fit baking trays in every and any format and for all types of baking equipment.

• We have been fortunate to welcome numerous new customers to our transport logistics division. Customer-specific transport solutions have contributed significantly to this success.

• We are steadily developing our product segment of refrigerated transport vehicles.

• Our bakery textiles and baking foils divisions are both continuing to make progress. This development has certainly been helped not least by our flexibility in offering customized solutions.

• In the area of exchangeable trays for instore baking ovens we succeeded in convincing even more producers of baking equipment of the superiority of our solution.

• An increasing demand has also been registered in our product segment of PTFE-perforated baking trays. Some of our customers have been employing these trays for more than five years without ever changing them.

• Hygienics products as well as cleansing devices have steadily been developed and improved over the years.

In recent years BICO‘s export sector has repeatedly been a driv-ing force for success. Which is another factor strengthening our confidence in a favorable perspective. We will continue to live up to the demands of the marketplace.

Bulk orders or customized solutions – let us be your partner of choice in every and any scope of business. Innovative results can only be achieved via innovative solutions! We are looking forward to a future of intense cooperation.

The Conz family

BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION

ADVANTAGES

5

Advantages and cost-effectiveness of BICO products

As a mid-sized family enterprise with a Swabian business philosophy, we rate our flexibility and the ease with which we can adapt to our customers’ wishes and requirements as one of our big fortes.

Apart from manufacturing standard product lines in large batches, our machinery also allows fast refitting for custom-ized designs. Hence, our production is very much shaped by manual craftsmanship wherever and whenever it makes sense, which positively affects the quality of our products. You are probably familiar with this reasoning from the bak-ery trade.

Operating our own toolmaking shop yields substantial sav-ings in third-party costs. At the same time, we can boast of employees with high expertise in metal working, as applied to the making of bakery equipment.

A few pertinent examples:

• For our Stikken and freezer carts we employ materials that are a far cry from what most of our competition uses. The platings are welded on by hand, resulting in very stable, unbroken bevel seams. Fixing each of our Stikken carts‘ wheels with four bolts and using thick-walled tubes makes for a long lifespan of our carts.

• Our high-quality stainless-steel refrigerated transport vehi- cle Extremo allows problem-free conveyance of your sensitive goods to your stores.

• Our transport carts for fermentation product supports can be adapted precisely to your operating procedures. In case of a necessary change of cloth, our unique stick-mounting ensures an easy renewal of the inserts. Let your operating procedures and needs determine your choice of inserts. Whether cheap disposable cloth, the classic green cloth or our mold-free nets, each and every adjustment to your requirements is available. Compared to charter systems, our tilting trays are more economical … you own them!

• Our technical-sewing shop is ready to custom-produce any baking textile fabric at your option. Thanks to our bulk-pur- chasing of raw materials we can offer you attractive prices.

• Thanks to our strong market position in the field of permanent baking foils we are able to offer you such foils in any format and thickness of your choice, and for any application, at bargain prices. We will deliver foils exactly in the thickness you want them, and will always specify the foil’s weight.

• Our deep-drawn baking trays are easily cleaned, and their particular design makes them economical and long-lasting.

• Right from the initial refitting of your existing bread-roll system trays, permanent cost savings, due to substantially reduced follow-up costs, can be realized.

• Our hygienics center will help you fulfill any and all hygiene regulations independent of local water and power supply.

• In a culture of comparability, the presentation of your products is becoming ever more important. A range of solutions especially developed for this purpose will help you improve your presentation.

Our multifaceted contacts to our customers, and the new challenges thence resulting, enable us to consistently update our product line. Innovative products are the result of this interaction!

Test us!

BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION

MATERIAL AND MAINTENANCE

BACKBLECHE

Description of material - raw material

Aluminum AlMg3 AlMg3 is the aluminum alloy with the best baking properties. It is absolutely suitable for foodprocessing and has the best longevity characteristics for wear and tear. Area of application:baking trays, perforated trays, baking tins. Suitable for all products.

FAL, AP or Alusteel Fire-aluminized steelsheets, i.e. steelsheets, aluminum coated on both sides for protection against erosion. Area of application: baking tins of all kind. BG Blue-shining tray or black tray, i.e. steel sheet with blue or black shining surface. Has excellent baking characteristics but is subject to erosion. Area of application: Baking tins and baking trays of all kind. Suitable for pastry production. Not suitable for sourdough products in freezers. Material N° 1.4016 Stainless steel (chrome steel) - magnetized. For application with baking trays, baking carts, suitable for sourdough products. Material N° 1.4301 Erosion-free stainless steel (chrome-nickel-steel) - non-magnetized. For application with carts, worktables, closets and counter trays.

Description of material - coating Silicone-rubber red One-component-siliconerubber as anti-adhesive coating, fitted for bakery needs, temperature resistant up to approx. 250°C. The coating composition meets the requirements of the German Federal Health Administration. Area of application: yeast-white-doughs, light breads,baguettes, rusk, toasts, sponge cakes etc. Silicone-resin Clear or pigmented, silicone-resin-solution as anti-adhesive coating, fitted for bakery needs, temperature resistant up to approx. 250°C. The coating composition meets the requirements of the German Federal Health Administration. Area of application: toasts, cakes, stirring whisks. PTFE Anti-adhesive coating harder than silicone (brand names e.g.Teflon®), available in different compositions and thickness of coating. The coating has to be adjusted to the corresponding product. No approx. number of baking processes can be given as the lifespan of coating depends on correct application and care as well as on the product itself and the temperature of the baking process.

6 BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION


7

Description of material - textiles and fleeces

Polyester sheets green, Possesses the best shrinking-factor for bakery textiles (only 0.5-1% at 60° C). grey or white

Profi-Net® fungus (mould) free Due to its closed structure, the monofil fabric prevents penetration of mould into netfabric the protective sheets under the dough pieces when applied correctly. Cotton-polyester sheets Due to the addition of polyester, the sheets have better cleaning properties. Shrinking factor 0.75-1.5%.

Description of material - permanent baking foils PTFE-permanent baking foils Inner structure fiberglass fabric, PTFE coating (brand name Teflon®). Fiberglass density, thickness of coating, strength of foil and color are all contingent on the peculiarities of the baking process and on the lifespan of the foil.

Description of material - covers/lids

Covers/lids BICO-covers for rack carts are made of very resistent and solid PVC tarp. The models with a see-through window are fitted with mesh for extra strength to improve their use in the cool areas. Solid zippers garantee a long service life.

Important notes for care

PTFE-coating Under no circumstances trays with damaged coatings should be used any further. The use of such defective material is a violation of federal laws and regulations (Law for Food and Food Processing Materials ). 1. Do not clean coated trays or tins with hard brushes or utensils; use soft wet clothd or soft sponges. They are machine washable with mild detergent. 2. In order to avoid damaging of coating, always store and stack trays and tins with a layer of paper between them or, even better, individually in a rack cart. 3. To avoid burning of coating (reduction of service life), do not put empty trays and tins into the heated oven. 4. Do not immerse coated trays and tins in salt solutions.


8

Silicone-rubber Under no circumstances trays with damaged coating should be used any further. The use of such detective material is a violation of federal laws and regulations (Law for Food and Food Processing Materials ). In order to avoid any damaging of the coating, respect and follow the following instructions: 1. Clean silicone trays with a wet cloth or soft sponge only. 2. Do not clean in dishwasher with agressive detergents. 3. Do not clean with steam cleaner. 4. Do not use sharp or pointed objects to clean the trays 5. Do not grease.

6. If possible, avoid dry flour on coated trays. 7. Siliconized trays must not be immersed in salt solutions. Aluminized steelsheets or Burn out the tins in the oven before their first use at approx. 200°C. Then grease the blue-shining-tin sheets (uncoated) tins slightly inside and outside and burn them out again for about half an hour at 200°C. To get rid of the surplus grease, put the tins in the oven upside down. Reasons for greasing the outside: With BG tins: to avoid erosion. With AP tins: to create a slight grease coating reducing reflection of heat by the aluminum layer. Remove baking goods immediately after the baking process to avoid humidity between the baking goods and the tins. Clean right away and grease slightly to avoid erosion.

Stainless steel trays and tins No special treatment necessary. Perforated trays for pretzel type baking goods: Wash, dry, grease slightly and burn out in for approx. half an hour at 200°C. If the baking goods still stick, restart the process with pretzel salt solution. After 10 to 20 baking cycles you don’t need to grease each time again. Textiles Do not wash polyester and cotton sheets warmer than at 60°C. Higher temperatures result in additional shrinking. Do not dry the sheets in dryers or tumblers. Hang them up moist.

Profi-Net® Profi-Net® does not attract mould by itself. Remove moulded dough left on the fabric from time to time with a steam-cleaner or in a throughway dish washer. Do not expose to heat over 70°C ! Permanent baking foils Do not heat permanent baking foils over 260°C! Clean with a wet cloth or with a brush. Do not stack the trays!



BAKING TRAYS


BACKBLECHE

BAKING TRAYSPERFORATED, NON-PERFORATED

Non-perforated baking trays with 3-sided rim

Description Length mm Width mm Height mm Item N°

Baking tray with 3-sided rimAluminium AlMg3,Thickness 1.5 mmNon-perforated

600 400 17 104000

530 325 20 Gastro-Norm GN1/1 104100

650 530 20 Gastro-Norm GN2/1 104200

580 580 20 with beading 104300

780 580 20 with beading 104400

980 580 20 with beading 104500

800 600 20 with beading 104600

Baking tray with 3-sided rimAluminium AlMg3Thickness 2.0 mmNon-perforated

600 400 20 105000

580 580 20 with beading 105100

780 580 20 with beading 105200

980 580 20 with beading 105300

Baking tray with 3-sided rimSteelsheet blue shineThickness 1.25 mmNon-perforated

600 400 17 106000

530 325 20 Gastro-Norm GN1/1 106100

650 530 20 Gastro-Norm GN2/1 106200

580 580 20 106300

780 580 20 106400

980 580 20 106500

Non-perforated pastry trays


Pastry traywith insertionAluminium AlMg3Thickness 1.5 mmRemovable fender

580 100 50 100000

600 100 50 100100

580 200 50 100200

600 200 50 100300

580 400 50 100400

600 400 50 100500

780 580 50 100600

Pastry traywith waveAluminium AlMg3Thickness 2.0 mmRemovable fender

580 100 50 102000

600 100 50 102100

580 200 50 102200

600 200 50 102300

580 400 50 102400

600 400 50 102500

780 580 50 102600

Perforated baking trays with 3-sided rim


Perforated trayPerforation Ø 3mmAluminium AlMg3Thickness 1.5 mm3-sided rim

600 400 17 110000

530 325 20 Gastro-Norm GN1/1 110100

650 530 20 Gastro-Norm GN2/1 110200

580 580 20 with beading 110300

780 580 20 with beading 110400

800 600 20 with beading 110500

980 580 20 with beading 110600

Made of AlMg3: enhanced cut- and scratch-resistance.

INFO

Description of product:

BICO wave trays: 2 mm material makes for a long lifespan. Front rail support for additional stability. Dirt-repellent in the corners. Also suitable for cake cut-ting machines.

INFO

All baking trays also available in a perforated versions, e. g. , for butter cake.Fine perforation prevents blistering of yeast dough at the bottom.

10

All dimensions are outer dimensions



Perforated trays with 3-sided rim


Perforated trays3-sided rim5 mm round perforationAluminium AlMg3Thickness 1.5 mm

600 400 17 112000

580 580 20 112100

780 580 20 112200

980 580 20 112300

Perforated trays3-sided rim5 mm square perforationAluminium AlMg3 Thickness 1.5 mm

600 400 17 113000

580 580 20 113100

780 580 20 113200

980 580 20 113300

Perforated trays with 3-sided rim with fine perforation


Perforated trays3-sided rim2 mm fine perforationAluminium AlMg3Thickness 1.5 mm

600 400 17 114000

650 530 20 Gastro-Norm GN2/1 114100

780 580 20 114200

980 580 20 114300

800 600 20 114400

Perforated trays with 3-sided rim


Perforated trays3-sided rim,3 mm round perforation Aluminium AlMg3Thickness 2.0 mm

600 400 20 115000

650 530 20 Gastro-Norm GN2/1 115100

580 580 20 115200

780 580 20 115300

800 600 20 115400

980 580 20 115500

Perforated trays3-sided rim5 mm round perforationAluminium AlMg3Thickness 2.0 mm

600 400 20 116000

780 580 20 116100

980 580 20 116200

Perforated trays3-sided rim5 mm square perforationAluminium AlMg3Thickness 2.0 mm

600 400 20 117000

780 580 20 117100

980 580 20 117200

Baking trays for cleaning machines, non-perforated


Baking tray for cleaning machinesAluminium AlMg3Thickness 2.0 mmShort sides 60°

600 400 120000

780 580 120100

980 580 120200

Baking tray for cleaning machinesAluminium AlMg3Thickness 2.0 mm Short sides 90°High rim 14 mm

600 400 122000

650 530 Gastro-Norm GN2/1 122100

530 325 Gastro-Norm GN1/1 122300

780 580 122400

980 580 122500

We offer our 3-sided-rim-trays in 2 mm thickness with reinforcement rack as an alternative to our trays that are welded inclined on the open side .A clean trimming allows safe handling and increased grip.

INFO

We supply all 1.5 mm-trays reinforced with rack and rim boarding.

INFO

11

BICO offers any and special sizes! Call us: +49 7046-9613-0.



Baking trays for cleaning machines, non-perforated


Baking tray for cleaning machinesAluminium AlMg3Thickness 2.0 mmLong sides 90°High rim 14 mm

600 400 123000

780 580 123100

980 580 123200

Perforated trays for cleaning machines


Perforated tray for cleaning machinesAluminium AlMg33 mm round perforationThickness 2.0 mmShort sides 60°

600 400 130000

650 530 Gastro-Norm GN2/1 130100

780 580 130200

980 580 130300

Perforated tray for cleaning machinesAluminium AlMg35 mm round perforationThickness 2.0 mmShort sides 60°

600 400 131000

780 580 131100

980 580 131200

Perforated tray for cleaning machinesAluminium AlMg35 mm square perforationThickness 2.0 mmShort sides 60°

600 400 132000

780 580 132100

980 580 132200

Perforated tray f. clean. mach.Aluminium AlMg33 mm round perforationThickness 2.0 mmShort sides 90°High rim 14 mm

600 400 133000

530 325 Gastro-Norm GN1/1 133100

650 530 Gastro-Norm GN2/1 133200

780 580 133300

980 580 133400

Perforated tray f. clean. mach.Aluminium AlMg35 mm round perforationThickness 2.0 mmShort sides 90°High rim 14 mm

600 400 134000

650 530 Gastro-Norm GN2/1 134100

780 580 134200

980 580 134300

Perforated tray f. clean. mach.Aluminium AlMg35 mm square perforationThickness 2.0 mmShort sides 90°High rim 14 mm

600 400 135000

780 580 135100

980 580 135200

Perforated tray for cleaning machinesAluminium AlMg33 mm round perforationThickness 2.0 mmLong sides 60°

780 580 135500

980 580 135600

Perforated tray for cleaning machinesAluminium AlMg35 mm round perforationThickness 2.0 mmLong sides 60°

780 580 135700

980 580 135800


BACKBLECHE12 BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION


Perforated trays for cleaning machines


Perforated tray for cleaning machinesAluminium AlMg33 mm round perforationThickness 2.0 mmLong sides 90°High rim 14 mm

600 400 136000

650 530 Gastro-Norm GN2/1 136100

780 580 136200

980 580 136300

Perforated tray for cleaning machinesAluminium AlMg32 mm fine perforation Thickness 2.0 mmShort sides 60°

600 400 137000

780 580 137100

980 580 137200

Perforated tray for cleaning machinesAluminium AlMg32 mm fine perforationThickness 2.0 mmShort sides 90°High rim 14 mm

600 400 138000

650 530 Gastro-Norm GN2/1 138100

780 580 138200

980 580 138300

Perforated tray for cleaning machinesAluminium AlMg3 2 mm fine perforationThickness 2.0 mmLong sides 90°High rim 14 mm

600 400 138500

650 530 Gastro-Norm GN2/1 138600

780 580 138700

980 580 138800

The order numbers given above indicate only the available standard dimensions. Please check, prior to ordering, which type of cleaning machine you use. We have special trays in stock for every brand of cleaning machines, each with an order number of its own.

STOP

BICO trays for cleaning machines are extremely stable and long-lasting as confirmed by leading cleaning machine manufacturers. A material strength of 2 mm, expert deburring and circular corners provide for a safe and everyday use.

INFO

For use in all known cleaning machines.

INFO

BICO offers all special dimensions! Call us: +49 7046-9613-0.


13BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION


Prior to first use, spray the stainless- steel trays with separating fat and burn several times to allow pastry to separate easier subsequently. Thereafter, grease regulary.

TIP Perforated trays for in-store oven

Description Length mm Width mm Item N°

In-store baking perf. tray Aluminium AIMg33 mm round perforationThickness 1.5 mmFold on 4 sides4 sides 45°

600 400 140000

530 325 Gastro-Norm GN1/1 140100

354 325 Gastro-Norm GN2/3 140200

In-store baking perf. tray Aluminium AIMg33 mm round perforationThickness 1.5 mmFold on 4 sides Long sides 90°

600 400 141000

530 325 Gastro-Norm GN1/1 141100

354 325 Gastro-Norm GN2/1 141200

440 350 141400

Stainless steel perforated trays for pretzel type pastry production


Stainless steel perforated trayStainless steel 40161 mm thick 3-sided rim5 mm square perforation

600 400 17 150000

580 580 20 150100

780 580 20 150200

980 580 20 150300

800 600 20 150400

Stainless steel perforated trayStainless steel 40161 mm thick5 mm square perforationAlso available in 3 mm and 5 mm round perforationShort sides 45°

600 400 151000

650 530 151100

780 580 151200

980 580 151300




Product description:

BICO-baking trays with permanent baking foils offer an easy detachment of the foils after wear. A special protected procedure allows a simple detach-ing of the terminal clip rails from the tray. Advantages: Renewal of coatings can be avoided, thus saving money, separa-tion fat, baking foil, and labor.

Our baking trays are also suitable for pretzel type pastry. For optimizing the bottom-building of the pastry, the trays are fitted with a 5 mm perforation right under the foil. The black color of the foil increases the thermal conductivity.

INFO


PTFE-fitted trays are suitable for fat- reduced pastry, especially for in-store ovens or for the production of frozen dough pieces.They tolerate temperatures up to 230°C. Their lifespan depends on the frequency of use: up to 1 or 2 years when used properly on a daily basis.Re-coating is possible.

INFO

Perforated trays with changeable foil


PFTE in-store baking trayAluminium AIMg35 mm perforationThickness 1.5 mmLong sides 90°High rim 10 mmWith 2 clip-railsat the short sides

600 400 10 143000

Accessories for perforated trays with changeable foil


Changeable foils for baking trays

640 390 143010

600 400

Substitute slides, 1 pair ofones, for baking trays

600 400 143011

Perforated trays 3-sided rim with changeable foil


PTFE-perforated trayAluminium AIMg35 mm perforationThickness 2.0 mmWith 2 clip-railsat the short sidesFront welded inclined

780 580 20 152000

980 580 20 152100

Accessories for perforated trays 3-sided rim with changeable foil


Changeable foils for trays 3-sided rim

830 570 for trays 780 x 580 152010

1030 570 for trays 980 x 580 152010

Substitute slides, 1 pair ofones, for trays 3-sided rim

for trays 780 x 580and 980 x 580

143012





BACKBLECHE

BAKING TRAYSBAGUETTE TRAYS

Baguette trays with contour rim

Description Length mm Width mm Bay width mm

Longsidebays

Item N°Ø 3.0 mm

Item N°Ø 2.0 mm

Baguette trayAluminium AlMg3Thickness 1.5 mmLongside baysCircular rim

600 400 80 4 160000 162000

600 400 70 5 160100 162100

600 400 55 6 160200 162200

600 400 45 7 160300 162300

780 580 170 3 160400 162400

780 580 100 5 160500 162500

780 580 80 6 160600 162600

780 580 70 7 160700 162700

780 580 60 8 160800 162800

780 580 45 10 160900 162900

980 580 170 3 161000 163000

980 580 100 5 161100 163100

980 580 80 6 161200 163200

980 580 70 7 161300 163300

980 580 60 8 161400 163400

980 580 45 10 161500 163500

650 530 100 4 161600 163600

650 530 60 7 161700 163700

650 530 55 8 161800 163800

650 530 45 9 161900 163900

Baguette trayAluminium AlMg3Thickness 1.5 mmShortside bayscircular rim

600 400 170 3 164000 166500

600 400 100 5 164100 166600

600 400 80 6 164200 166700

600 400 70 7 164300 166800

600 400 60 8 164400 166900

600 400 45 10 164500 167000

780 580 100 6 164600 167100

780 580 95 7 164700 167200

780 580 80 8 164800 167300

780 580 70 9 164900 167400

780 580 60 10 165000 167500

780 580 55 11 165100 167600

780 580 45 13 165200 167700

980 580 100 8 165300 167800

980 580 90 9 165400 167900

980 580 80 10 165500 168000

980 580 75 11 165600 168100

980 580 68 12 165700 168200

980 580 60 14 165800 168300

980 580 55 15 165900 168400

980 580 45 16 166000 168500

650 530 80 5 166100 168600

650 530 70 8 166200 168700

650 530 55 10 166300 168800

650 530 45 11 166400 168900

All tins and trays are available with non-stick coating. Please notify when ordering.

INFO

BICO also offers different sizes and types. Just call +49 7046-9613-0 for assistance.

TIP



Baguette trays with flat bay floor and no rim

Description Length mm Width mm Rows longside

Rowsshortside

Molds width mm

Item N°

Baguette trayFlat bay floorNo rim

780 580 6 80 169000

780 580 7 70 169100

780 580 8 60 169200

780 580 8 80 169300

780 580 9 70 169400

780 580 10 60 169500

530 325 4 71 169900

Baguette trays with no rim


Longsidebays

Item N°Ø 3.0 mm

Item N°.Ø 2.0 mm

Baguette trayAluminium AlMg3Thickness 1.5 mmLongside baysNo rim

600 400 80 4 170000 172500

600 400 70 5 170100 172600

600 400 55 6 170200 172700

600 400 45 7 170300 172800

780 580 170 3 170400 172900

780 580 100 5 170500 173000

780 580 80 6 170600 173100

780 580 70 7 170700 173200

780 580 60 8 170800 173300

780 580 45 10 170900 173400

980 580 170 3 171000 173500

980 580 100 5 171100 173600

980 580 80 6 171200 173700

980 580 70 7 171300 173800

980 580 60 8 171400 173900

980 580 45 10 171500 174000

650 530 100 4 171600 174100

650 530 60 7 171700 174200

650 530 55 8 171800 174300

650 530 45 9 171900 174400

All tins and trays are available with non-stick coating. Please state when ordering.

INFO

Product description: Each bay is fixed solidly onto a welded base frame. Omitting a rim prevents dirty corners. Available with round perforation 3 mm and fine perforation 2 mm.

INFO


These baguette trays guarantee a flat posture of the rolls on the tray floor.

INFO





Baguette trays with no rim


Shortsidebays

Item N°Ø 3.0 mm

Item N°Ø 2.0 mm

Baguette trayAluminium AlMg3Thickness 1.5 mmShortside baysNo rim

600 400 170 3 175000 177500

600 400 100 5 175100 177600

600 400 80 6 175200 177700

600 400 70 7 175300 177800

600 400 60 8 175400 177900

600 400 45 10 175500 178000

780 580 100 6 175600 178100

780 580 95 7 175700 178200

780 580 80 8 175800 178300

780 580 70 9 175900 178400

780 580 60 10 176000 178500

780 580 55 11 176100 178600

780 580 45 13 176200 178700

980 580 100 8 176300 178800

980 580 90 9 176400 178900

980 580 80 10 176500 179000

980 580 75 11 176600 179100

980 580 68 12 176700 179200

980 580 60 14 176800 179300

980 580 55 15 176900 179400

980 580 45 16 177000 179500

650 530 80 5 177100 179600

650 530 70 8 177200 179700

650 530 55 10 177300 179800

650 530 45 11 177400 179900

Baguette trays with flexible fiberglass fabric

Description Length mm Width mm Longside rows

Shortsiderows

Molds width mm

Item N°

Baguette tray for systemsWith silicone fabricGrey

780 580 6 80 180000

780 580 7 70 180100

780 580 8 60 180200

780 580 8 80 180300

780 580 9 70 180400

780 580 10 60 180500

All tins and trays are available with non-stick coating. Please state when ordering.

INFO

Ideal for the baking of frozen dough pieces, Replacement nets on request!

INFO

Replacement silicone

Description Length mm Width mm Longside rows

Shortsiderows

Molds width mm

Item N°

On demand



TIP BICO also offers different sizes and types. Just call +49 7046-9613-0 for assistance.

BAKING TRAYSTRAYS FOR BAKING SYSTEMS

Hamburger tray

Description Length mm

Width mm

Height mm

Ø Shapemm

Depthmm

Item N°

System trays on demand

Hamburger trayFor 35 Hamburgers Aluminized steel sheet 1 mm with stacking boardSilicone-rubber coating

780 580 30 98 12 209500

Baking system trays demand utmost dimensional accuracy to guarantee a steady flow. Our trays are manufactured using solid, non-torsion Stainless steel frames in the customer‘s exact specifica-tions. Only coated versions available.

INFO All trays for baking systems are available with a teflon coat. Just Call + 49 7046-9613-0.

TIP


ALL KIND OF TRAYS FOR BAKING SYSTEMS ON REQUEST



BAKING TINS


BACKBLECHE

BAKING TINSMULTIPLE BREAD TINS

22

Multiple bread tins, deep-drawn

Description Length top mm

Width top mm

Length bottom mm

Width bottom mm

Heightmm

Item N°

Bread tin unit Aluminized steel sheetWith supporting angle for rack carts 580 mm, without lidDeep drawn

4 pieces à 500 g 165 100 155 90 85 200000

4 pieces à 750 g 190 100 180 90 85 200100

4 pieces à 1000 g 230 110 220 100 95 200200

4 pieces à 750 g 190 90 180 80 100 200300

3 pieces à 2000 g 275 120 265 110 100 200500

3 pieces à 1100 g 140 140 140 140 110 202000

Toastbread and Sandwichbread tin unit Aluminized steel sheetWith supporting angle for rack carts 580 mm, without lid Deep-drawn Stainless steel on request

4 pieces 200 100 195 93 90 203100

4 pieces 270 98 265 92 94 203200

Multiple bread tins


Width top mm

Length bottom mm

Width bottom mm

Heightmm

Item N°

Toastbread tin unit Aluminized steel sheet Finely slanted ribbed For 500 g-breads4 pieces without lidWith circular band

250 95 247 94 95 204100

For rack carts 250 95 247 94 95 205100

Lid for 204100 + 205100 205200

Toastbread tin unit Aluminized steel sheet Finely slanted ribbed For 500 g-breads4 pieces without lidWith circular band

275 95 272 94 95 206100

For rack carts 275 95 272 94 95 207100

Lid for 206100 + 207100 207200

All articles available with silicone or PTFE-coating. Other sizes on request.Just call +49 7046-9613-0.

TIP

No more greasily! Nicely sharped products. Simple removing of cakes and pastries.

TIP

With this size of tins the breadends may be cut!

INFO


23

BAKING TINSMULTIPLE BREAD TINS

Multiple bread tins, deep-drawn


Width top mm

Length bottom mm

Width bottom mm

Heightmm

Item N°

Sandwich tin unit AP Aluminized steel sheet Finely slanted ribbed With supporting angle for rack carts3 pieces with lid

370 120 368 118 120 208000

Minibread tin unitAluminized steel sheet For 500 g-breads With supporting angle for rack cartsTotal length 580 mmDeep-drawn8 pieces with lid

140 85 140 80 80 208201

Minibread tin unitAluminized steel sheet For 500 g-breads With supporting angle for rack cartsTotal length 580 mmDeep-drawn4 pieces with lid

140 85 140 80 80 208202

Multiple bread tins, deep-drawnDescription Length

top mmWidth top mm

Width bottom mm

Heightmm

Item N°

Triangular tin unitAluminized steel sheet For 750 g-breads With supporting angle for rack cartsTotal length 580 mm 4 pieces without lid

210 130 470 110 208500

Deckel für 208500 208700

Triangular tin unitAluminized steel sheet For 350 g-breads With supporting angle for rack cartsTotal length 580 mm 6 pieces without lid

140 130 500 120 209000

Lid for 209500 209500



BACKBLECHE

BAKING TINSMULTIPLE BREAD TINS, VARIOUS TINS

24

Multiple bread tins

Description Tin Length mm

Tin Width mm

Tin Height mm

UnitLength mm

UnitWidth mm

Item N°

Double-walledbox formAluminized steel sheet

on request

Semicircle multiplebread tinAluminized steel sheet4 pieces without lidWith supporting angle for rack carts

230 110 90 580 115 209200

Multible bread tinAluminized steel sheet4 pieces without lidWith supporting angle for rack carts

180 95 90 580 100 209300

other sizes are available on request

Baking tins


Width top mm

Length bottom mm

Width bottom mm

Heightmm

Item N°

Cake tinAluminized steel sheet

580 140 580 130 80 209400

Full grain bread tinAluminized steel sheet

200 100 190 90 100 210000

230 110 220 100 100 210100

250 120 240 110 100 210200

Baking tin standardized seriesAluminized steel sheet

190 80 170 60 70 211000

200 120 180 100 70 211100

210 100 190 80 70 211200

230 110 210 90 75 211300

250 110 230 90 75 211400

300 120 280 100 80 211500

Baking tin standardized seriesBlue steel tin/black tin

190 80 170 60 70 212000

200 120 180 100 70 212100

210 100 190 80 70 212200

230 110 210 90 75 212300

250 110 230 90 75 212400

300 120 280 100 80 212500

All items available with silicone or PTFE-coating. Just call +49 7046-9613-0.

TIP


25

BAKING TINSBUNDT CAKE TINS

Bundt cake tins

Description Ø Upper inside mm

Height mm

Ø Grommet bottom mm

UnitLength mm

UnitWidth mm

Item N°

Rodon tin unitSteel sheet Seamless deep-drawn 3 piecesEach approx. 250gCoated with silicone resin

160 80 55 580 170 220000


180 90 65 580 270 221000


200 100 75 580 210 222000

Rodon tin unitSteel sheet Seamless deep-drawn 3 piecesEach approx. 200g Coated with silicone resin

145 85 35 580 320 223000

Instructions of care for new baking tins see page 7.

INFO



Stollen tins unit

Description Single tin length mm

Single tin width mm

Single tin height mm

Unitlength mm

Unitheight mm

Item N°

Stollen tin unit5 pieces with lidAluminized steel sheetFor approx. 190g

133 70 50 500 150 230000


160 108 60 580 185 230500


230 100 70 580 255 231000

Stollen tin unit4 pieces with lidAluminized steel sheetFor approx. 500g - 750g

250 120 70 580 275 232000


300 120 75 580 325 233000

Stollen cut in pieces tinWith lidAluminized steel sheet

580 130 80 - - 234100

780 130 80 - - 234200

BAKING TINSSTOLLEN TINS UNIT

Canned bread tin unit


Height mm

Ø mm Item N°

Canned bread tin unitAlMg3, 2 mm5 pieces Size of unit 580 x 100 mm

580 120 100 203300

Kaviar bread tin


Ø mm Content g Item N°

Kaviar bread tinAluminized steel sheet3 piecesFoldable

400 65 3 x 500 203600


+49 7046 9613-0ANY QUESTIONS? JUST CALL

STOLLEN TIN UNIT HANDMADE

CHARACTERISTICS

■ Beautifully designed stollen like hand-made

■ Long-lasting form material

■ Little cleaning effort

■ Easy take-out of stollen

■ Suitable for all rack carts

■ Standard 4 pieces unit

INFO

■ Item N°: 809455

■ Length: 580 mm

■ Width: 255 mm

■ Height: 70 mm

■ Material: aluminized

steel sheet

■ Blackened outside

■ Industriestraße 17

■ 74397 Pfaffenhofen

■ www.bico-gmbh.de

BICO GMBH

THE REVOLUTION!


BAKING TINSCAKE TRAYS

Cake trays

Description Ø Top inside mm

Ø Bottom outsidemm

Height mm Item N°/Size

Cake trayAluminium Al99.5 1.5 mm

240 200 40 250000

260 220 40 250100

280 240 40 250200

300 260 40 250300

320 280 40 250400

340 300 40 250500

360 320 40 250600

380 340 40 250700

400 360 40 250800

500 460 40 250900

Cake trayBlue steel sheet/black sheet

240 200 40 252000

260 220 40 252100

280 240 40 252200

300 260 40 252300

320 280 40 252400

340 300 40 252500

360 320 40 252600

380 340 40 252700

400 360 40 252800

500 460 40 252900

Cheesecake trayAluminium Al99.5 1.5 mm

280 260 50 255000

300 280 50 255100

320 300 50 255200

340 320 50 255300

360 340 50 255400

380 360 50 255500

Cheesecake trayBlue steel sheet/black sheet

280 260 50 256000

300 280 50 256100

320 300 50 256200

340 320 50 256300

360 340 50 256400

380 360 50 256500

We carry a lot of different sizes. Just call +49 7046-9613-0.

INFO



BBAKING TINSPIZZA TRAYS, CAKE TRAYS

Pizza trays


Ø Bottom outsidemm


Pizza trayBlue steel sheet/black sheet

160 140 25 258000

180 160 25 258100

200 180 25 258200

220 200 25 258300

240 220 25 258400

260 240 25 258500

280 260 25 258600

300 280 25 258700

320 300 25 258800

340 320 25 258900

Pizza trayAluminium Al99.5 1.5 mm

160 140 25 259000

180 160 25 259100

200 180 25 259200

220 200 25 259300

240 220 25 259400

260 240 25 259500

280 260 25 259600

300 280 25 259700

320 300 25 259800

340 320 25 259900

Savarin tray


Ø Bottom outsidemm


Savarin trayAluminium AlMg3 1.5 mm

300 270 40 270000

Cake tray flat


Ø Bottom outsidemm


Cake tray flatAluminium AlMg3 1.5 mm, rim 30°

500 271000

420 272000


BAKING TINSCAKE TRAYS, FREEZER TRAYS, PRESENTATION TRAYS

Cake trays perforated


Ø Bottom outsidemm


Cake tray perforatedØ 4 mm,Aluminium Al99.51.5 mm

180 160 30 280000

200 180 30 280100

220 200 30 280200

240 220 30 280300

260 240 30 280400

280 260 30 280500

300 280 30 280600

320 300 30 280700

340 320 30 280800

360 340 30 280900

380 360 30 281000

400 380 30 281100

Freezer trays


Ø Bottom outsidemm


Freezer trayAlMg3, 1.5 mm 4 sided rimCorners welded

600 400 20 300000

580 780 20 300100

Presentation trays

Description Length mm Width mm Rim mm Item N°/Size

Presentation trayStainless steel 0.8 mm Brushed 4 sided rimCorner open, 75°Stackable

400 300 20 301000

600 200 20 301100

600 400 20 301200

Presentation trays

Description Length mm Width mm Rim mm Item N°/Size

Presentation trayStainless steel 0.8 mmLeather structure4 sided rimCorner open, 75°Stackable

400 300 20 302000

600 200 20 302100

600 400 20 302200


BAKING TINSPRESENTATION TRAYS, CREAM GATEAU RINGS

Sandwich holder

Description Length mm Width mm Item N°/Size

Sandwich holderLeather structureStainless steel 1.0 mm6 pieces

570 100 303000

Other designs on request

Cream gateau rings

Bezeichnung Ø mm Height mm Item N°/Size

Cream gateau ringAluminium AlMg3Thickness 2.0 mm

140 50 310000

160 50 310100

180 40 310200

180 50 310300

180 60 310400

180 70 310500

200 50 310600

200 60 310700

220 50 310800

220 60 310900

240 60 311000

260 50 311100

260 60 311200

260 70 311300

280 50 311400

280 60 311500

Cream gateau ring, stainless steelStainless steelThickness 1.5 mm

160 50 314000

180 60 314100

200 50 314200

240 50 314300

260 60 314400

260 70 314500

280 50 314600

280 60 314700

BICO also carries other sizes. Just call +49 7046-9613-0.

INFO



BAKING TINSCREAM GATEAU RINGS, STOLLEN RINGS

Cream gateau bottom

Description Ø mm Sheet thickness mm Item N°/Size

Cream gateau bottomAluminium AlMg3

300 1,2 316000

320 1,2 316100

Cream gateau bottom

Description Measuring Ø mm Rim height mm Item N°/Size

Cream gateau bottomAluminium AlMg390° rim

245 10 317000

265 10 317100

285 10 317200

Stollen ring

Description Item N°/Size

Stollen ringAluminium AlMg32 mmIndividually produced after your sizes

317500


WHISKS


WHISKSSUPER-NOVA MACHINE WHISKS


The long lifespan of the whisk wires is ensured by their special fitting. The wires are tightened by means of a clamping ring, which leaves enough room for play to provide proper flexibility.

Replacement of wires is easy since only the clamping ring has to be removed. The wires in a whisk have always the exact same length – mix-up is impossible.

We carry all types of replacement wires. When ordering, make sure to indicate type and size of whisk (usually engraved at bottom of whisk).

INFO1. UNSCREW 2 SCREWS

2. REMOVE TIGHTENING HOOK

4. REPLACE BROKEN WIRE

3. REMOVE TIGHTENING RING - WIRES ARE FREE


BACKBLECHEBAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION 35

WHISKSMACHINE WHISKS AND REPLACEMENT WIRES

Stirring whisk for heavy substances, e.g. buttercream6 wires Ø 4 mm for sizes 2 and 3; 6 wires Ø 5 mm for sizes 3 and 4

Description Size Wire ø mm Item N°

Stirring whiskComplete with 6 wiresYellow head

2 4 320000

3 4 320100

3/5 5 320200

4 5 320300

Replacement wirefor stirring whisk

2 4 320500

3 4 320600

3/5 5 320700

4 5 320800

Batter whisk for light substances like beaten egg whites, whipped cream16 wires Ø 3 mm for sizes 2-4


Batter whiskComplete with 16 wiresGrey head

2 3 321100

3 3 321200

4 3 321300

Replacement wirefor batter whisk

2 3 321600

3 3 321700

4 3 321800

Mixer whisk for all finished products like sponge cake dough, e.g. biscuit, sand cake12 wires Ø 4 mm for sizes 2 and 3, 12 wires Ø 5 mm for sizes 3 and 4


Mixer whiskComplete with 12 wiresRed head

2 4 322000

3 4 322100

3/5 5 322200

4 5 322300

Replacement wirefor mixer whisk

2 4 322500

3 4 322600

3/5 5 322700

4 5 322800


Size For container Shank length S Broom basket K Length with shank L

2 20 litres 72 mm 280 mm 352 mm

3 32 litres 110 mm 330 mm 440 mm

4 40 litres 110 mm 360 mm 470 mm

Rego 20 Ø Erka 25 Ø Boku 20 Ø Boku 20 Ø Boku RS Habämfa 25 Ø Fomko 20 Ø Fomko 25 Ø Fomko 30 Ø

R 2 R 3 short 72 mm long 126 mm short 130 mm Habämfa 20 Ø 20 L 32 L 40 L

S 20 S 32 / S 40 310 320 Long 190 mm

SM 20 SM3 / SM 4 316 620

WHISKS

MACHINE WHISKS AND REPLACEMENT WIRESFAX ORDER FORM

For convenient ordering please make some copies of this page. Enter address, pick yor whisk, enter amount. Then fax or email. Thank you.

Company ___________________________________________________________________________

Mrs./Mr. ___________________________________________________________________________

Street ___________________________________________________________________________

Zip ___________________________________________________________________________

Phone ___________________________________________________________________________

Fax ___________________________________________________________________________

E-Mail ___________________________________________________________________________

Date/Signature ___________________________________________________________________________

Stirring whisk 6 wires for heavy substances like buttercream Replacement wires

Order whisk complete with shank for mixing machines/type (please indicate)

Item N° Amount Wire ø mm

Item N° Order replacement wire, each 6 pieces

Size 2 320000 4 320500

Size 3 320100 4 320600

Size 3/5 320200 5 320700

Size 4 320300 5 320800

Batter whisk 16 wires for light substances Replacement wires

Order whisk complete with shaft for mixing machines/type (please indicate)



Size 2 321100 3 321600

Size 3 321200 3 321700

Size 4 321300 3 321800

Mixer whisk 12 wires for all finished products like biscuit Replacement wires

Order whisk complete with shaft for mixing machines/type (please indicate)



Size 2 322000 4 322500

Size 3 322100 4 322600

Size 3/5 322200 5 322700

Size 4 322300 5 322800


All spare parts are available individually.


TRANSPORTATION

TRANSPORTATIONGLAZING TABLES, FREEZER CARTS

Glazing tables

Description Width mm Depth mm Height mm Weigth Item N°/Size

Glazing table 780 x 580Stainless steel 4301 Distance between supports 70 mm 2 spin wheels with brakes May also be used for trays600 x 400 mm

660 790 900 400000

Glazing table 600 x 400Stainless steel 4301 Distance between supports 70 mm 2 spin wheels with brakes

470 610 900 401000


600 660 900 402000


390 540 900 402100

Freezer carts


Freezer cart 600 x 400Short side insertionStainless steel 430117 round steel supportsØ 8 mm1 frame coveringDistance between supports 90 mm

660 425 1800 410000

Freezer cart 600 x 400Long side insertionStainless steel 430118 round steel supportsDistance between supports 90 mm

460 625 1800 411000


BICO-icing tables are unique: The resting blades are solidly welded instead of spot-welded. For comfortable insertion of trays and avoiding of abrasion the rails are edged at the front and have a solid stop at the end. Perfect for instore use.

INFO



TRANSPORTATIONTRANSPORT CARTS

Freezer carts, Transport carts

Description Number of supports

Distance ofsupports mm

Exterior sizes mm

Weigth Item N°/Size

Freezer cart 580 x 780Long side insertion600 x 400,Short side insertionWheels on inside

18 88 790 x 660 x 1830 412000

20 80 790 x 660 x 1830 412100

24 65 790 x 660 x 1830 412200

Freezer cart 650 x 530Gastro norm 2/1,Long side insertionWheels on inside

18 88 660 x 600 x 1830 413000

20 80 660 x 600 x 1830 413100

24 65 660 x 600 x 1830 413200

Freezer cart 530 x 325Gastro norm 1/1,Long side insertionWheels on inside

20 77 390 x 540 x 1750 413300

Transport cart 980 x 580Long side insertionWheels on inside

18 88 990 x 645 x 1830 414000

20 80 990 x 645 x 1830 414100

24 65 990 x 645 x 1830 414200

Transport cart 600 x 400Long side insertionWheels on inside

18 88 610 x 465 x 1830 415500

20 80 610 x 465 x 1830 415600

24 65 610 x 465 x 1830 415700

Freezer carts, Z-type



Exterior sizes mm


Freezer carts, Z-type 780 x 580 and600 x 400, Short side insertion

18 88 790 x 660 x 1850 415000

20 80 790 x 660 x 1850 415100

24 65 790 x 660 x 1850 415200

Freezer cart, Z-type580 x 980

990 x 645 x 1850

Z-type carts are perfect for nesting thus saving space – and money. Any questions? Just call +49 7046-9613-0.

TIP

BAKING TRAYS I BAKING TINS I WHISKS I TRANSPORTATION I WHEELS I WORKTABLES I FOILS, TEXTILES I TRAYS FOR FERMENTATION 39

TRANSPORTATIONTRANSPORT CARTS, PVC COVERS/HOODS

Closed cart

Description Width mm Depth mm Height mm For trays Weigth Item N°/Size

Transport cart ClosedStainless steel cover 18 supports Distance 88 mm Saving door with snap lock Reinforced with 1 mm omega profilSlides thickness 1.5 mmFacing thickness 0.8 mm

465 640 1830 600 x 400 416000

660 840 1830 780 x 580 416100

800 x 600

2 x 600 x 400 crosswise

Closed carts are perfect for transportation from baking shop to outlets.

INFO

PVC hoods with zipper/without window


Hood For rack cartsWithout windows Made of tarp material 2 zippers

620 470 1700 600 x 400 416500

810 680 1700 580 x 780 416600

1010 680 1700 580 x 980 416700

PVC hoods with zipper/without window


Hood For rack cartsFrontside transparent Made of tarp material 2 zippers

620 470 1700 600 x 400 417000

810 680 1700 580 x 780 417100

1010 680 1700 580 x 980 417200


All hoods are made of solid truck tarp material providing longevity. We produce each hood individ-ually in your sizes. Given for perfect fit. We only use heavy duty zippers.

INFO

Upon request, we also produce special orders like curtains for transport containers, etc. Just call +49 7046-9613-0

TIP



TRANSPORTATIONTRANSPORT CARTS, PVC COVERS/HOODS

Hoods for bread shelf carts/with window


Width mm

Height mm

Zippersfrontside

für Rost-größe mm


Hood For norm bread shelf carts 1260 x 430 x 1650 mmFrontside transparent Made of tarp material 2 zippers

1300 470 1520 2 1200 x 400 417500

Cooling transport cart „EXTREMO“

Description Height mm

Width mm

Depth mm

For traysmm

For basketsmm


Cooling transport cart Number of supports upon request

1800 525 765 600 x 400 600 x 400 420000

Cold pack 600 400 420100

Tray and drying carts

Description Width mm

Depth mm

Height mm

For traysmm


Tray cart For approx. 60 trays

665 600 1900 600 x 400 430000

845 780 1900 780 x 580 430100


Protect your sensitive products against high temperature and contamination!- very high insulating values- door with up to 270° opening angle- surface completly in stainless steel- extremely stable chassis- solid closure

INFO

BICO tray carts are perfect for drying, storage of boxes or tins. Any Questions? Just call +49 7046-9613-0.

TIPP


TRANSPORTATIONRACK CARTS

WP-Rototherm

Description Height mm Number of supports

Exterior sizes mm


Rack cart 580 x 780RotothermWith phenolicresin wheels

1800 18 790 x 645 440000

Rack cart 580 x 980RotothermWith phenolicresin wheels

1800 18 990 x 645 440500

Other support number on request

MIWE Roll-In


Exterior sizes mm


Rack cart 580 x 780MIWEWith phenolicresin wheels

1800 18 790 x 645 441000


1800 18 990 x 645 441500


MIWE Shop-In


Exterior sizes mm



1620 18 465 x 600 441800

Depth frames 550 x 465 mm, other support number on request

WP-Unitherm


Exterior sizes mm


Rack cart 580 x 780UnithermWith phenolicresin wheels

1800 18 860 x 630 x 1800 442000


Rack cart 580 x 980Unitherm With phenolicresin wheels

1800 18 1060 x 630 x 180 442500


BICO only uses best quality: wheels bolt-ed 4-times, 4 solid steel bars as chassis, thickness of rails 1.5 mm, thickness of pipes 1.5 mm, outward slant of rimless rails prevents grit from alighting on subjacent tray.

INFO

The chassis of BICO:4-times bolted wheels on a stable cross frame: long lifespan, high durability.

INFO




Bongard


Exterior sizes mm


Rack cart 580 x 780BongardWith phenolicresin wheels

1770 18 645 x 815 x 1770 443000

Upper and or lower insertion with hump rail


Familiar BICO-quality:Slides are solidly welded instead of spot-welded. For comfortable insertion of trays and high durability.

INFO

Mondial


Exterior sizes mm


Rack cart 580 x 780MondialWith phenolicresin wheels

1770 18 640 x 785 x 1770 444000


Sveba-Dahlen


Exterior sizes mm


Rack cart 580 x 780Sveba-DahlenWith phenolicresin wheels

1800 18 645 x 790 x 1800 445000


König Roto Passat


Exterior sizes mm


Rack cart 580 x 780KönigWith phenolicresin wheels

1740 18 635 x 755 x 1740 446000

Rack cart 580 x 980KönigWith phenolicresin wheels

1740 18 635 x 955 x 1740 446500


Debag


Exterior sizes mm


Rack cart 580 x 780DebagWith phenolicresin wheels

1740 18 635 x 820 x 1750 447000


BICO carries rack carts from all manufac-turers. Additionally we offer single-unit and custom-made production. We are happy to advise you.Just call +49 7046-9613-0.

INFO

Phenolic resin wheels are standard for rack carts. Hotline or Romanelli wheels are available upon request and subject to a surcharge.

INFO



Revent


Exterior sizes mm


Rack cart 580 x 780Revent With phenolicresin wheels

1800 18 645 x 790 x 1800 449000


MIWE Thermo-Stikken


Exterior sizes mm



1910 As specified 855 x 610 x 1800 450000

Rack cart 580 x 980MIWE With phenolicresin wheels

1910 As specified 1055 x 610 x 1800 450500

Daub Thermo-Stikken


Exterior sizes mm


Rack cart 580 x 780DaubWith phenolicresin wheels Ø 100 mmOn Request with or without interfloor

1930 As specified 850 x 1930 x 650 451000

Rack cart 580 x 980Daub With phenolicresin wheels

1930 As specified 1050 x 1930 x 650 451500

BICO carries rack carts from all manufac-turers. Additionally we offer single-unit and custom-made production. We are happy to advise you.Just call +49 7046-9613-0.

INFO

Phenolic resin wheels are standard for rack carts. Hotline or Romanelli wheels are available on request and subject to a surcharge.

INFO




Heuft thermo-rack


Exterior sizes mm


Rack cart 580 x 780Heuft, stainless steel 1.4301With phenolic resinwheelsHeuft thermo rollFor trays 800 x 600 mm 10 floors, HTB coupling, Height adjustment10 interfloors

1930 10 680 x 865 x 1930 452000

Rack cart 580 x 980Heuft, stainless steel 1.4301With phenolic resinwheelsHeuft thermo rollFor trays 1000 x 600 mm 8 floors, HTB coupling, Height adjustment

1930 8 680 x 1065 x 1930 853182


Rack carts, Z-type


Exterior sizes mm


Rack cart, Z-type 580 x 780BongardWith phenolic resin wheelsand hump rail

18 645 x 815 x 1770 455000


Z-rack cart 580 x 780Dahlen With phenolic resin wheels

18 645 x 790 x 1775 455010


Z-rack cart 580 x 780MIWE With phenolic resin wheels

18 645 x 790 x 1775 455030


Z-rack cart 580 x 780Rototherm With phenolic resin wheels

18 645 x 790 x 1770 455040


Z-rack cart 580 x 780Winkler With phenolic resin wheels

18 645 x 790 x 1885 455050

Other support number on request, also available in size 580 x 980

BICO delivers to you rack carts of all manufacturers. Please call us. We will gladly talk to you. Single-part and custom-made designs are also possible!

INFO

All rack carts are equipped with heat resistent hard plastic wheels (phenole resin). Hotline and Romanelli wheels at extra costs.

INFO



Cake racks

Description Number ofsupports


Exterior sizes mm


Cake rack 530 x 500 x 1730Stainless steel 4301

16 100 500 x 530 x 1730 455500

18 90 455600

Cake racks, C-type



Exterior sizes mm


C-cake rack 560 x 530 x 1770Stainless steel 4301

16 100 520 x 530 x 1730 456000

18 90 456100

Carts for ingredients, 60 litres


Cart for ingredients 4 spin wheels2 of them with brakes/100 mm

4 containers 60 litres 870 600 900 456500



Carts for ingredients, 40 litres


Cart for ingredients 4 spin wheels2 of them with brakes/100 mm




Other features possible. Just call +49 7046-9613-0.

INFO



TRANSPORTATIONRACK CARTS, CARTS FOR INGREDIENTS

Container carts, 25 litres


Container cart 9 containers 25 litres Without lids

685 450 1830 457300

Container cart 9 containers 25 litres With lids

685 450 1830 457400

Containers for ingredients


Container for ingredients 25 Litres

610 440 150 457800


600 400 320 457500


600 400 215 457600


600 400 165 457700

Snap-on lid for 457-500, -600 and -700

n. A. n. A. n. A. 457900

BICO-Containers for ingredients are food-safe and dishwasher-safe.Material: PE-HD (polyethylene high-density)Heat resistance: -30°C – +60°CColor: natural (white)

TIP



Bread shelf cart

Description number ofsupports

Length mm

Depth mm

Height mm



Bread shelf cart Stainless steelWithout support grilles

10 1260 430 1650 165 458000

Support racks

Description Length mm Depth mm Weigth Item N°/Size

Wooden racks 1200 400 458500

Aluminum racks 1200 400 458600

Stainless steel racks 1200 400 458700

Sack cart

Description Width mm Depth mm Heigth mm Number ofbags


Sack cartFor 25 kg-sacks2 spin wheels2 fixed wheels

685 400 775 3 459000

1125 400 775 5 459100

BICO offers non-standard dimensions! Just call +49 7046-9613-0.

TIP




Bread cart


Depth mm

Height mm

Shelves Distance betweenshelves mm


Bread cart With centred axis 2 aluminum racks per shelfU-channel ductSolidly weldedHeavy-duty construction

2100 700 1900 8 200 460000

Fermentation cart


Depth mm

Height mm

Shelves Distance betweenshelves mm


Fermentation cartStainless steel4 spin wheels Ø125 mmOne set of spin armsin work height

n.A. 600 1830 10 149 461000

n.A. 600 1830 12 124 461100

n.A. 600 1830 16 93 461200

Bake-through cart


Width mm

Depth mm

Height mm

Distance between supports mm


Bake through cartStainless steel 4301

8 1200 640 1700 208 462000

10 1200 640 1700 160 462100

Heavy-duty version with sections tubes 40 x 40 x 1.5 mm. When ordering please indicate outer dimensions of pull-off tool.

INFO


TIP

Heavy duty versions available on request!

TIP



Tray carts


Depth mm

Height mm

Size of traymm


Tray cart For cleaning appliances Short side insertion

870 625 725 780 x 580 463000

Tray cart For cleaning appliances Long side insertion

670 825 725 780 x 580 463100

Tray cart For cleaning appliances Short side insertion

1070 625 725 980 x 580 463001

Tray cart For cleaning appliances Long side insertion

670 1025 725 980 x 580 463101

Multi-servant, Z-type


Depth mm

Height mm


Multi-servant, Z-type Stainless steel 4301 4 wheels,2 with brakes

580 580 800 466000

Z-type multi-servants developed by BICO. Perfect for temporary worktable or intermediate despo-sition. Z-type ideal for nesting thus saving space.

TIP




Transport cart for fermentation product supports


Depth mm

Height mm


Transport cart Stainless steel 4301 For fermentation product supports 590 x 390Covered on 2 sides Open backFront lock

660 460 1380 467000

Aluminium trolley


Depth mm

Height mm


Aluminium trolley Material thickness 3 mm For boxes and baskets Solid design

611 411 130 467100


TIP


WHEELS


WHEELSWHEELS FOR EQUIPMENT

Wheels, plastic with rubber wheels, galvanized housing, load capacity: 75 kg

Description Ø mm Ø Bolt hole mm

Heightmm


Wheels 75 11 100 470200

Wheels with brake function

75 11 100 470250

Wheels, plastic with rubber wheels, galvanized housing, load capacity: 80 kg


Heightmm


Wheels 100 12.5 125 470000


100 12.5 125 470100

Wheels, polypropylene/rubber, galvanized housing, load capacity: 80 kg


Heightmm


Wheels 100 80 x 60 125 470300


100 80 x 60 125 470350

Fixed roller 100 80 x 60 125 470360

Wheels, polyamide, galvanized housing, load capacity: 150 kg


Heightmm


Wheels 100 13 129 470400


100 13 129 470450



Heightmm


Wheels 100 80 x 60 129 470500


100 80 x 60 129 470550



Heightmm


Wheels 125 80 x 60 155 470600


125 80 x 60 155 470650


WHEELSWHEELS FOR RACK CARTS

Wheels, phenolic resine, stainless steel case, heat-resistant


Heightmm

Temperature resistance


Rack cart roll/ central bolt

100 12 125 -40°C to +280°C 471000

Rack cart roll/ 4 hole

100 12 125 -40°C to +280°C 471100

Wheels, plastic and rubber made, stainless steel case, heat-resistant, smooth running


Heightmm



Hot-Line roll/ central bolt

100 12 125 -30°C to +260°C 472000

Hot-Line roll/ 4 holes

100 12 125 -30°C to +260°C 472100

Wheels, metal casting with PTFE-surface, stainless steel case, heat-resistant


Heightmm



Romanelli roll/ central bolt

100 12 125 -40°C to +300°C 473000

Romanelli roll/4 holes

100 12 125 -40°C to +300°C 473100

BICO-Line, rubber wheels, stainless steel case, heat-resistant, smooth running


Heightmm



Rack cart roll/ central bolt

100 12 125 -40°C to +280°C 472500

Rack cart roll/ 4 holes

100 12 125 -40°C to +280°C 472600


WHEELSWHEELS FOR RACK CARTS

Spare wheel, with axle complete

Description Ø mmfrom/to



Phenolic resine wheel 100 -40°C to +280°C 474200

Hot-Line wheel 100 -30°C to +260°C 474300

Romanelli wheel, metal casting 100 -40°C to +300°C 474400

Romanelli wheel, stainless steel 100 -40°C to +300°C 474500

BICO-Line 100 -40°C to +280°C 474600

Expander mount, square

Description Ø mm Weigth Item N°/Size

Expander mount, square inside 36-40 mm M10 474700

Expander mount, square inside 27-30 mm M10 474800

Wheels, metal casting with PTFE-surface, stainless steel case, heat-resistant,acid-resistant


Heightmm



Romanelli roll/ central boltwith stainless steel rim

100 12 125 -40°C to +300°C 474000

Romanelli roll/4 holeswith stainless steel rim

100 12 125 -40°C to +300°C 474100

Romanelli wheels are suitable for intense cleaning and disinfection.

INFO

WORKTABLES


WORKTABLESTHE BICO-DIFFERENCE

3 mm high-grade stainless steel desktop with soft edges for better cleaning results –very hygienic

Easy handling and insertion of cartswith plastic runners

Beech wood or granite platetabletop available

Pull-out drawers made from

high-grade stainless steel for

perfect function and long lifespan


+49 7046 9613-0WE GLADLY MAKE YOU AN OFFER

WORKTABLES

■ BICO carries all kinds of variations

■ Cupboards, built-in wardrobes, cleaning material cupboards

■ Beech wood or granite plate tabletops available

■ 3 mm high-grade stainless

steel tabletop

■ Soft edge

■ High-grade stainless steel

drawers




BICO GMBH


WORKTABLESEQUIPMENT

Table carts

Description Length mm Width mm Height mm Weigth Item N°/Size

Flour cartStainless steel, content 100 kg

700 435 780 485000

Drawer blockStainless steel, 4 drawers,rollable, 2 wheels with brakes

630 520 760 485500

Shelf

Description Length mm Width mm Height mm Shelves Item N°/Size

Stainless steel shelfStainless steel 4301Solid welded shelf

Manufactured after your specifications

Sinks/rinsing basins

Description Length mm Width mm Height mm Item N°/Size

Upon request We supply different sizes and models upon request. Just call!

494000

Handwash-sink combination


Handwash-sink combinationWith mixing faucet With outlet and overflowSize of sink 1: 340 x 240 x 150 Size of sink 2: 370 x 340 x 150

500 600 850 / 570 494500

Individual sizes and models upon request! Just call +49 7046-9613-0.

TIP

Different specifications available. Just challenge us and call +49 7046-9613-0.

INFO


WORKTABLESEQUIPMENT

Rinsing and drip cart


Rinsing and drip-off cartAdjustable hooks

1260 630 1930 495000

Presentation cart

Description Width mm Depth mm Height mm Size of tray Item N°/Size

Presentation cart Manufactured customers to specifications

Presentation shelf


Presentation shelf 1260 430 1650 496500

Belt conveyor workbenches

Description Item N°/Size

Belt conveyor workbenches electrically (220 V DC)powered

Width and length of the belt available in different sizes 497500

Mobile conveyor workbench

Description Weigth Item N°/Size

Mobile conveyor belt Height and incline adjustable

498500

Presentation carts and presentation shelves are available in different variations. For more information, just call +49 7046-9613-0.

INFO

BICO rinsing and drip-off carts offer adjustable hooks.

INFO

Belt conveyor workbenches and conveyor belts are manufactured to customer´s specifications. Just call +49 7046-9613-0.

INFO

Available also with eccentric chassis. Mobile, but still safe stability.

TIP


CONVEYOR BELT WORKTABLES

+49 7046 9613-0WE WILL BE HAPPY TO MAKE YOU AN OFFER




BICO GMBH

■ BICO manufactures individual worktables to customer´s

specifications

■ Belt conveyor workbenches entirely built from stainless

steel. Fast ROI with higher production output, for example

for preparation of sandwiches or salads

■ Heavy-duty version with

solid stainless steel tubing

■ Stainless steel tabletop

■ Mobile for variable usage


WORKTABLESEQUIPMENT

Hygienic workstations

Description Width mm Depth mm Height, working height mm


Hygienic workstation 12V AC/220V DCFully equippedBoiler 12V AC/220V DC19 l tanks for fresh water/waste waterStainless steel top with soap dispenser and paper towel dispenserDoor with waste basket and shelf for personal belongingsFreshwater tank with floating valve for direct connection to public water system (6 bar)Waste water tank with own tap12V AC/33 Ah gel battery, charger 12V/4A, maintenance-free immersion pump 12 V, single lever pit with microswitch

620 540 1030/880 494700

Hygienic workstation 220V DC (without 12V AC) Specifications see above, but without 12V ACBoiler 220 V DC, without gel battery, no charger12 V AC power adapter for immersion pump

620 540 1030/880 494710

Heating pan

Description Data Item N°/Size

Heating pan 700000

Diameter 500 mm

Capacity 14 litres

Weigth 18 kg

Material Chromium-nickel steel 18/10

Power Tubular heater core with control dial, 70 - 220 °C, infinitely adjustable,2,8 kW, 230V, 10 A, 2 m power cord

Configuration Pan with 2 handles, power switch, temperature indicator


WORKTABLESEQUIPMENT

Glazing- and spraying station


Depth mm

Height over all mm


Glazing- and spraying stationStainless steel 1.4301 4 spin wheels,2 with brake functioncover 600 mm, with drain

1200 800 1450 483000

Immersion basin


Length mm

Height mm


Immersion basinStainless steel 1.43012 spin wheels 2 fixed wheelsVolume 250 Litre2 x outlet spoutsHeating element with control 400 V, 4,5 kW withcover plateSimple and safe handling

500 1020 750 495700


WORKTABLESEQUIPMENT

Cake ring tin rack

Description Chassis mm

Height mm


Cake ring tin rack, singleStainless steel 1.43013 spin wheelsCenter pole 1600 mm

635 1750 468000

Cake ring tin rack, doubleStainless steel 1.43014 spin wheelsDouble pole 1600 mm each

600 x 400 1750 468100

Caldron cart

Bezeichnung Chassis mm

Height mm


Caldron cart

Stainless steel 1.43014 spin wheelsCaldron intake 360 mm

415 x 415 465 851185

We at BICO are happy to manufacture wall racks according to your measurements. Just call 07046-9613-0.

TIP

Wall rack, traversable


Depth mm

Height mm


Wall rackMetal holder for backing tins6 levels with a distance of 150 mmTraversable to the wall

Variable 400 1200 803204

Available in any color, subject to surcharge


FOILS, TEXTILES

Permanent baking foil 600 x 400 brown

Description Thickness mm

Weigthg/m2

Length mm

Width mm

Item N°/Size

PTFE-permanent baking foil brown 0.08 120 600 400 500000

brown 0.11 220 600 400 500100

brown 0.25 455 600 400 500200


Description Color Thickness mm

Weigthg/m2

Length mm

Width mm

Item N°/Size


brown 0.11 220 780 570 501100

brown 0.25 455 780 570 501300



Weigthg/m2

Length mm

Width mm

Item N°/Size


brown 0.11 220 980 570 502100

brown 0.25 455 980 570 502300

Permanent baking foil 600 x 400 black


Weigthg/m2

Length mm

Width mm

Item N°/Size

PTFE-permanent baking foil black 0.11 220 600 400 503100

black-silver 0.13 260 600 400 503300

black 0.25 455 600 400 503200



Weigthg/m2

Length mm

Width mm

Item N°/Size


black-silver 0.13 260 780 570 504300

black 0.25 455 780 570 504200



Weigthg/m2

Length mm

Width mm

Item N°/Size


black-silver 0.13 260 980 570 505300

black 0.25 455 980 570 505200

FOILS, TEXTILESPERMANENT BAKING FOILS – CUT FOR TRAYS

Permanent baking foils are available in various thicknesses and colors. Stronger foils have a thicker PTFE coating and a thicker fiberglass fabric on the inside. It is evident: depending on usage and on the thickness of the foil, the permanent foils are good for between 500 (0.08 mm), 2500-3000 (0.13 mm) and 5000 (0.25 mm) baking cycles. When baking pastry with no aggressive ingredients like yeast pastry or bread rolls, the foil has a longer life expectancy than when used for baking pretzels and similar pastry.

INFO

Permanent baking foils can be used with temperatures up to 260° C.

INFO

The color and consistency of the fiber-glass fabric also have an influence on the bottom development of the pastry:black foils do better in transferring the heat. For yeast pastry, a brown foil is sufficient as you don’t have to pay that much attention to the bottom building.

INFO



FOILS, TEXTILESPERMANENT BAKING FOILS

Permanent baking foils for hotplates are used with pretzels when put on the shelves in a multiple-shelf oven. When letting them sit on the exhaust, the foils prevent the appearance of stains on the hotplates caused by the aggressive brine. Furthermore, the foils add to the outcome of a perfect pasty bottom.

INFO

Permanent baking foils for hotplates, 0,11 mm brown


Weigthg/m2

Length mm

Width mm

Item N°/Size


brown 0.11 220 1700 570 507100

brown 0.11 220 1800 570 507200

brown 0.11 220 2000 570 507300

brown 0.11 220 2200 570 597400

Permanent baking foils for hotplates, 0,25 mm brown


Weigthg/m2

Length mm

Width mm

Item N°/Size


brown 0.25 455 1800 570 509100

brown 0.25 455 2000 570 509200

brown 0.25 455 2200 570 509300

Permanent baking foils for hotplates, 0,13 mm black


Weigthg/m2

Length mm

Width mm

Item N°/Size

PTFE-permanent baking foil black-silver 0.13 272 1600 570 510000

black-silver 0.13 272 1700 570 510100

black-silver 0.13 272 1800 570 510200

black-silver 0.13 272 2000 570 510300

black-silver 0.13 272 2200 570 510400

Permanent baking foils for hotplates, 0,25 mm black


Weigthg/m2

Length mm

Width mm

Item N°/Size


black 0.25 455 1800 570 511100

black 0.25 455 2000 570 511200

black 0.25 455 2200 570 511300

Permanent baking foils for hotplates


Weigthg/m2

Length mm

Width mm

Item N°/Size


brown 0.25 455 2000 1200 512200

Common baking foils are called 0.13 mm but are only 0.11 mm in thickness and therefore offered for a much more inexpensive price.

BICO is specifying not only the exact thickness but also the weigth in g/m2 to describe the foil much more in detail.

Please consider this, when compar-ing prices.

INFO

Perfect for use with fragile and easy sticking products on run-through-ovens and to avoid residues and stains.

TIP


Permanent baking foils on roll, brown


Weigthg/m2

Length mm

Width mm

Item N°/Size

PTFE-permanent baking foil brown 0.08 120 100 m 570 513000

brown 0.11 220 100 m 570 513100

brown 0.25 455 100 m 570 513200

FOILS, TEXTILESPERMANENT BAKING FOILS

Permanent baking foils on roll, black


Weigthg/m2

Length mm

Width mm

Item N°/Size

PTFE-permanent baking foil black 0.11 220 100 lfm 570 514100

sw-silver 0.13 260 100 lfm 570 514300

black 0.25 455 100 lfm 570 514200

BICO offers permanent baking foils with a width of 57 cm on big rolls with 100 meters only. Please consider when ordering.

INFO

BICO carries a large variety of sizes. Just call call +49 7046-9613-0.

INFO

PTFE-permanent baking foil self adhesive 0.08 mm, single cuts (sheets)


Weigthg/m2

Length mm

Width mm

Item N°/Size

PTFE-adhesive foil brown 0.08 600 400 515000

brown 0.08 800 600 515100

brown 0.08 1000 600 515200

PTFE-permanent baking foil self adhesive 0.08 mm, on roll

Description Color Thickness mm Weigthg/m2

Width mm Item N°/Size

PTFE-adhesive foil brown 0.08 400 516000

brown 0.08 600 516100

brown 0.08 1000 516200

Product description

Self-adhesive permanent foils are coated with a foodproof silicone adhesive. After removing the protective paper, the foils can be used to line clean and degreased tins. Perfect for in-store ovens or freezing of dough pieces for rolls or buns. Not suitable for greased food products. Not suitable for temperatures higher than 230°C.

INFO

Application notes for adhesive foils are enclosed in every shipment.

INFO



FOILS, TEXTILESGLAS FIBRE MESH, INSERTS FOR TILTING DEVICES

Glas fibre mesh, PTFE-coated

Description Color Thickness mm Grid mm Item N°/Size

Glas fibre mesh, PTFE-coated,580 x 380 mm,without bound edges

brown 0,97 4 x 4 811441

Glas fibre mesh, PTFE-coated,770 x 580 mm,without bound edges

brown 0,97 4 x 4 807190

Glas fibre mesh, PTFE-coated,,970 x 570 mm,without bound edges

brown 0,97 4 x 4 808943

Standard fleece for plastic tilting trays

Description Length mm Width mm Type of tilting tray

Division Parts per packaging

Item N°/Size

FleeceStandardPerforation accordingly

566 366 Bg Kombi 20 1000 572000

566 366 Bg Kombi 20 250 572100

548 356 Compart 20 1000 572200

548 356 Compart 20 250 572300

728 534 Compart 20 500 572400

728 534 Compart 20 250 572500

Antibacterial fleece is an inexpensive alternative to textiles and mesh. When rubbed in potato powder, the inserts separate easily from the dough pieces after freezing or during fermentation Thin versions dry fast and are suitable for regeneration of wooden tilting trays. Thicker versions are perfect for soft dough but need more time for drying.

INFO

BICO carries different inserts for all customary yellow tilting trays.

INFO


FOILS, TEXTILESPROFI-NET®, MOULD (FUNGUS) FREE PLASTIC NETS

PROFI-NET-mesh is fabricated as an enclosed monofilament made of polypropylene material. Since it is not a regular fabric, there is no way that fungus can penetrate it. Easy to clean with running water or in a dishwasher. Recommended by leading bakeries, e. g. one of the biggest bakeries in Europe that has been using over 40.000 units of PROFI-NET since 2001 and hasn’t seen any fungus developing.

INFO

PROFI-NET® – mould (fungus) free plastic nets, for tilting trays

Description Length mm Width mm Velcro tapes Item N°/Size

PROFI-NET®For tilting traysWith velcro

600 400 at short sides 560000



PROFI-NET®For tilting traysWithout velcro

600 400 without 561000

780 580 without 561100

980 580 without 561200

PROFI-NET®For tilting traysWith hem-stitching at short sides

600 400 without 562000

780 580 without 562100

980 580 without 562200

PROFI-NET®For tilting traysWith hem-stitching at long sides

600 400 without 563000

780 580 without 563100

980 580 without 563200

PROFI-NET®On rollMinimum order 150 cont. meters

200 lfm 630 without 564000

Please consider when ordering: the measurements refer to standard sizes of tilting trays. We are able to manufacture these inlets according to your needs, resp. your individual tilting trays. Just keep in mind that one of the dimensions has to be either 55 cm, 56 cm or 57 cm as a standard, other dimensions will count as special production.

INFO



FOILS, TEXTILESINSERTS FOR TILTING TRAYS

Green polyester cloths are perfect for businesses who like to wash. The cloth is boil-proof, shrink-age is only 0.5 % after first washing in hot water. Therefore please order your sizes 0.5% bigger to have a perfect fit. The width of the velcro is chosen a little bigger on purpose to compensate for deviating dimensions.

INFO

Green polyester cloths

Description Length mm Width mm Velcro/Hem-stitching

Item N°/Size

Green polyester clothEdges thermally weldedFor bonding or inserting

600 400 without 580000

780 580 without 580100

980 580 without 580200

Green polyester clothWith hem-stitching on the short sides

600 400 short sides 581000

780 580 short sides 581100

980 580 short sides 581200

Green polyester clothWith velcro on the short sides

600 400 short sides 582000

780 580 short sides 582100

980 580 short sides 582200

Green polyester clothWith velcro on the long sides

600 400 long sides 583000

780 580 long sides 583100

980 580 long sides 584200

Green polyester clothWith velcro on all sides

600 400 4 sides 584000

780 580 4 sides 584100

980 580 4 sides 584200

Green polyester clothOn rollMinimum order 150 cont. meters

100 m 570 585000

100 m 580 585100


FOILS, TEXTILESSHEETS FOR LYE TREATMENT APPLICATION

The blend of cotton and polyester provides for lesser shrinkage when washed hot. This is why we do not offer pure cotton cloth which shows a high percentage of shrinkage.

INFO

Cotton-polyester cloths

Description Length mm Width mm Velcro Weigth Item N°/Size

Cotton-polyester clothWith velcro on short sides

600 400 short sides 586000

780 580 short sides 586100

980 580 short sides 586200

Cotton-polyester clothWith velcro on short sides

600 400 long sides 587000

780 580 long sides 587100

980 580 long sides 587200

Sheets for lye treatment application

Description Length mm Width mm Velcro tape/ Hollow seam


Green polyester sheets with velcro For lye treatment application systemsFixed size

780 580 at one short side 590000


Green polyester sheets with hem-stitching For lye treatment application systemsFixed size





FOILS, TEXTILESSHEETS FOR LYE TREATMENT APPLICATION

Profi-Net® sheets for lye treatment application

Description Length mm Width mm Velcro tape Weigth Item N°/Size

ProfiNet® with velcro For lye treatment application systemsFixed size



ProfiNet® with hollow seamFor lye treatment application systemsFixed size



Carry-along sticks

Description Length mm Ø mm Weigth Item N°/Size

Carry-along sticksFor lye treatment application systems

590 5 595500

Carry-along sticksFor dount systems

730 5 595600

Velcro – Fleece strips – Tapes

Description Width mm Weigth Item N°/Size

VelcroSelf adhesiveFor tilting trays

25 597000

20 597100

Fleece tapeFor sewing

20 597500

25 597600

38 597700

Our velcro is self-adhesive and bonds very well with aluminum. When applied on wooden tilting trays additional gluing for better bonding is recommended. Make sure to degrease very well.

INFO

Elastic sheets for dough containers

Description Ø container mm Weigth Item N°/Size

Elastic sheetCotton-polyesterFor dough container

up to 700 mm 600000

700 - 1000 mm 600100

more than 1000 mm 600200

The elastic sheets are made of a cotton-polyester-blend and are suitable for hot washing. A broad elastic rubber band sewn in under tension guarantees a stable fit on the container.Advantage: Better fermentation plus prevention from contamination and crustification.

INFO

When ordering please state exact diameter of container.


THIS IS HOW IT WORKS:

VERSION 1: You ship your well-used trays even contaminated. BICO is in charge of refitting.

VERSION 2: You ship your well-used trays washed and cleaned. BICO is in charge of refitting.

VERSION 3: You order a BICO refitting-kit and do it yourself.

VERSION 4: You order brand-new fabricated BICO-trays made of aluminum.

... FOR AMOUNTS BIGGER THAN 300 WE PRODUCE NEW TRAYS USING ALUMINUM

CLEANING AND REFITTING OF TRAYS FOR DOUGH PIECES

YOUR ADVANTAGES:

• you pick your favorite lining

• exchangeable after refitting

• mould/fungus-free nets upon request

• available for all common trays

TURNING WELL-USED ONES

... INTO BRAND-NEW ONES!

+49 7046 9613-0We are happy to send you a quote!




BICO GMBH



FOILS, TEXTILESCLEANING AND WORK OVER OF BREAD ROLL SYSTEMS – TRAYS

Completely retro-fitted with terminal rails and Profi-Net®

Description Length mmfrom

Length mmto

Width up to mm

Item N°/Size

Removal of old inserts (sanding)Refitted with Profi-Net®and terminal rails

500 599 100 630000

600 699 100 630100

700 800 100 630200

Removal of the old inserts may be very time consuming. We therefore need 2-3 sample trays from you in order to give you an exact quote.

INFO

Replace clean trays with Profi-Net®


Length mmto

Width up to mm

Item N°/Size

Clean trays usedRefitted with Profi-Net®and terminal rails

500 599 100 631000

600 699 100 631100

700 800 100 631200

Trays need to be completely cleaned with no stains or residue to guarantee our prices.

INFO

Retro-fitting-kit for do-it-yourself


Length mmto

Width up to mm

Item N°/Size

1 pair of terminal railsand 1 Profi - Net for do-it-yourself mounting

500 599 100 632000

600 699 100 632100

700 800 100 632200

Replacement rails separately


Length mmto

Width up to mm

Item N°/Size

Terminal rail per piece 500 599 100 633000

600 699 100 633100

700 800 100 633200

Of course we are offer special sizes! Just call +49 7046-9613-0.

INFO


FOILS, TEXTILESINSERTS FOR TRAYS

The different inserts mentioned below are for direct glueing into bread roll system trays. We offer them for DIY in a version without velcro. Therefore thorough sanding is inevitable to get rid of any contamination or residue. Afterwards, you simply work with hot glue or PONAL to stick the new inserts to the tray. We gladly assist you in finding the perfect suitable textile and deliver promptly. Just order some samples.

INFO

Inserts for tilting trays for do-it-yourself, without velcro


Length mmto

Width up to mm

Item N°/Size

Profi-Net® 500 600 100 620000

610 700 100 620100

710 800 100 620200

Green cloth 500 600 100 620300

610 700 100 620400

710 800 100 620500

The different inserts mentioned below are equipped with fleece tape according to your specifi-cations and are mounted into the trays with velcro. The matching counterpart is not part of the shipment and needs to be applied at your premises.

INFO

Inserts for tilting trays for do-it-yourself cuts, with velcro


Length mmto

Width up to mm

Item N°/Size

Profi-Net® 500 599 100 625000

600 699 100 625100

700 800 100 625200

Green cloth 500 599 100 625300

600 699 100 625400

700 800 100 625500

Of course we offer spezial sizes! Just call call +49 7046-9613-0.

TIP



TRAYS FOR FERMENTATION

TRAYS FOR FERMENTATIONTRAYS FOR FERMENTATION, ALUMINUM

At first glance, the huge variety of trays for fermentation mentioned below may be confusing. Our experience tells us that there is no standard tray for fermentation, which can be used in each indi-vidual bakery. The choice is subject to: type of production (freezing, interruption of fermentation, fresh production, par-baking), type of oven (tray feeding automatically or by hand, etc.), type of storage (stacked, rack carts, transport rollers, etc.), type of fabric (there is no universal fabric for all the different production procedures), humidity in the fermentation cabinets (cloth and fleece pickup the humidity from their environment, mesh and foils don’t). It is not necessary to use ex-pensive stacking trays for rack carts when simple push-in grills are sufficient. The supply needs to be adjusted to the individual workflow.

INFO

Trays for FermentationAluminum, stackable, slip-resistant, ext. height 45 mm

Description Length mm Width mm Push throughheight mm

Stackingmm


Tray for fermentationType ALWithout cloth

590 390 48 40 530000

770 570 48 40 530100

970 570 48 40 530200

Tray for fermentationType ALWith green cloth and velcro or attachable to a stick

590 390 48 40 530500

770 570 48 40 530600

970 570 48 40 530700

Tray for fermentationType ALWith mould (fungus)-free PROFI-NET and attachable to a stick

590 390 48 40 531000

770 570 48 40 531100

970 570 48 40 531200

Upon request trays are available anodized or powder-coated.

INFO

BICO manufactures individual trays to customers dimensions.

INFO



TRAYS FOR FERMENTATIONORDER FORM, DIMENSION AND DATA SHEET 1

Tray for Fermenation, Aluminum 1.5 mm2 sides with stacking edge,slip-proof, compatible for stacking trolleys

Length mm:

Width mm:

Height mm:

With perforation ❏Without perforation ❏Attachment of cloth:

Tension rod ❏Velcro ❏Inserts:

Without ❏Green cloth ❏Profi-Net ❏Stacking edge:

Long side ❏Short side ❏Miscellaneous:

Tray for Fermenation, Aluminum 1.5 mm4 sides with stacking edge 12 mmslip-proof, compatible for stacking trolleys

Length mm:

Width mm:

Height mm:



Without ❏Green cloth ❏Profi-Net ❏Stacking edge:


Please attach a layout-sketch to clearly indicate on which side you like to have the perforation.

INFO



Tray for Fermenation, Aluminum 1.5 mmstackable, slip-proof, ext. height 48 mm,

Length mm:

Width mm:

Height mm: 48 mm, stack 40 mm, inside 38 mm



Without ❏Green cloth ❏Profi-Net ❏Miscellaneous:

Tray for Fermenation, Aluminum 1.5 mmstackable, with BICO-section

Length mm:

Width mm:

Height mm: 50 mm/42 mm



Without ❏Green cloth ❏Profi-Net ❏Pushing edge:



INFO




Tray for Fermenation, Aluminum 1.5 mmnot stackable, for insertion in rack cart

Length mm:

Width mm:

Height mm:



Without ❏Green cloth ❏Profi-Net ❏Miscellaneous:


INFO


ORDER FORMDIMENSION AND DATA SHEET

Company name:

Dimensions baking tray

L1 Inner length

B1 Inner width (5mm-steps)

L2 Total length

B2 Total width

H Total height

Dimensions carts

1 Total width

2 Total length

3 Inner width

4 Clear span

5 Distance between supports

6 Total height

No. of supports

Dimension of carts for food-safe covers

1 Total width

2 Total length

6 Total height

7 Distance between wheels


Dimensions backing tray unit

for use with rack carts

a) Outer length

b) Distance between molds

c) Outer length

d) Distance between molds


ORDERFORM

Item N° Description QuantityFAX-ORDER ❏ FAX-INQUIRY ❏

Please indicate.

SENDER

_______________________________________

Company

_______________________________________

Mrs./Mr.

_______________________________________

Street

_______________________________________

Zip/City

_______________________________________

Phone

_______________________________________

Fax

_______________________________________

E-mail

_______________________________________

Date/Signature

CONSIGNEE

BICO GmbHIndustriestraße 17 D-74397 PfaffenhofenPhone: +49 7046/9613-0 Fax: +49 7046/9613-20 E-Mail: [email protected] Internet: www.bico-gmbh.de


TERMS AND CONDITIONS

§ 1 Preface

1. The general conditions of sale and delivery set forth here will apply for the whole duration of the business relationship. The following terms and conditions will not apply to our purchases and orders. The latter are subject to our separate conditions for purchase and orders. 2. Differing, opposing or ancillary terms and conditions of the customer will not become an integral part of the contract even when known, unless we explicitly acknowledge their applicability.

3. The following terms and conditions will apply even when we make deliveries to the customer without reservation on our part, in full awareness of opposing or differing terms or conditions on the part of the customer.

4. The term „customer“ and “customers” as used hereunder is understood to apply solely to business entities. Hence, the terms and conditions set forth here do not apply to final consumers.

§ 2 Conclusion of contract

1. Our offers and bids are conditional and non-binding. Likewise, recommendations or samples provided by us are non-committal. As we have no precise knowledge of where and how our products or services will be employed, our recommendations or samples will always be provided on a conditional basis. Consequently, we will not be held liable for any faulty or inappropriate recommendations.

2. Customers will be contractually bound to their orders for four weeks. For us, such orders will only be binding inasmuch as we have confirmed them in writing or have fulfilled the order by delivery. We are entitled to accept customers’ orders within the aforementioned four-week period of commitment. A binding contract will not be effective until the customer’s receipt of our written acceptance of the order. However, the customer is not entitled to cancel his order even in the case of a belated ordeferred receipt of the order confirmation.

3. Our acceptance of customers’ orders will always be subject to the availability of the products ordered.

4. Any images,drawings, calculations or other materials provided to the customer will remain within our ownership and copyright. They must not be made available to third parties. The customer is obliged to return them to us in their entirety if no contract accrues or if a contract is terminated.

§ 3 Delivery and transfer of perils

1. Any delivery dates provided by us will only be regarded as binding if confirme contractually or in writing. Differing agreements on binding delivery dates have to be concluded explicitly and in writing. Any delivery period to which we have co- mitted will be subject to prior clarification of any and all technical issues as well as to the timely and proper fulfillment of all of the customer’s obligations, in particular his liability to pay. In cases of strike, lockout, disruption of operations, energy shortfall, traffic distur- bance, force majeure, non-availability of essential third-party components or other fulfillment obstacles beyond our control we are entitled to a fair adjustment of promised delivery dates. The same reservation will apply in case of any unforesee- able machinery failure occurring outside of our sphere of responsibility. In such case we will likewise be entitled to a fair adjustment of promised delivery dates.

2. We reserve the right to perform partial deliveries and partial services to an extent deemed acceptable for the customer. In case of partial deliveries, the occurrence of deficiencies in just one partial delivery will not entitle the customer to cancel the contract as a whole.

3. The products to be delivered by us will not be insured by us. The customer can approach us about insuring our deliveries. However, any such inquiry will not constitute an insuring our deliveries. However, any such inquiry will not constitute an obligation on our part to insure our deliveries. In case we decide to voluntarily insure a delivery this will in each case be done at customer’s expense.

4. In case of problems and additional expenses resulting from faulty address data submitted by the customer, the latter will have to reimburse us for these expenses. Customer’s obligation to reimburse us for expenses caused by a failed delivery attempt will also be effective in cases in which physical factors on the ground prevent the delivery of a shipment, or when the customer can not be located under the address provided by him.

5. Any delivery dates or delivery periods of which customer has been notified will be acknowledged as duly met when the shipment has been consigned to the carrier, forwarding agent or another person charged with the job of delivering it to the customer. Should the handing-over of the shipment to the party charged with its delivery be delayed for reasons within the customer’s responsibility, our statement announcing that the shipment is ready for pick-up within the agreed-upon delivery period shall suffice to verify our adherence to those dates and periods.

6. In cases where we have agreed to take back a product after a specified usage period, customer shall be obliged to return originally delivered to him.

7. In cases where we default on delivery dates or periods and would consequently be liable for damage compensation we are obliged to make good only for con- crete and proven damages resulting from the delay. Furthermore, the compensation is limited to 5 percent of the value of the delayed shipment or partial shipment. This liability limitation will not take effect in cases of our vicarious agents, nor will it take effect in case of culpable endangerment of life, body or health, or for claims based on product liability laws. Inasmuch as we might be lawfully liable for damage compensation, certain damages caused by delay, such as loss of earnings or losses due to interruption of operations, are excluded from liability claims. This liability limitation will likewise not take effect in cases of intentional or grossly negligent breach of contract on our part or on the part of our vicarious agents, nor will it take effect in case of culpable endangerment of life, body or health or for claims based on product liability laws.

8. Should the customer fall behind in accepting our delivery (“default of acceptance”) we will be entitled, after expiry of a deadline set by us, to withdraw from the contract or demand compensation. Our rightful entitlements regarding default of acceptance will remain unaffected. Customers will be deemed in default of acceptance if they fail to admit delivery for more than four weeks after having received our shipment notice. In case of default of acceptance, the customer will have to reimburse us for any and all expenses ensuing thereof, such as storage costs, storage rental expenses and contingent insurance fees. We are not bound, however, under no obligation, to insure stored items. Further- more, we reserve the right to use the services of a hauling company or a similar third party with pertinent expertise, to store such items at the customer’s expense.

9. As an alternative to claiming refund of storage costs accrued, as stipulated under paragraph 8, we also reserve the right, in case of the customer’s default of acceptance, to charge the customer a flat fee for storage costs pursuant to our current table of storage costs (presently EUR 5.50 per square meter and month). We will make our storage costs spreadsheet available to the customer upon request. The customer has the right to demonstrate that our storage costs have actually been lesser than stated, or even that no storage costs have accrued.

10. Any and all deliveries resp. services rendered by us will come “ex premises”. The risk of accidental loss and accidental handover of the shipment to the carrier, forwarding agent or another person charged with the job of delivering it to the customer. This risk transfer will take effect, at the latest, when the shipment leaves the premises resp. when the data files are mailed to the customer. If dispatch is delayed due to circumstances within the customer’s sphere of responsibility, risk shall pass to the customer from the day on which notification is given that the shipment is ready for dispatch.

§ 4 Payments/Prices

1. Unless otherwise agreed on in writing, our stated prices are effective “ex premises”, with VAT (at current legal rate) added on top. Ancillary costs, such as for packaging, hauling, customs fees or cargo insurance be invoiced separately.

2. Prices agreed upon will be binding within a period of four months after conclusion of contract. In cases where delivery of goods or services is intended to occur more than 4 months after conclusion of contract, we shall be entitled to raise the contracted compensation resp. the agreed-on prices commensurately, inasmuch as conditions compensation resp. the agreed-on prices commensurately, inasmuch as conditions on which pricing were based – particularly material costs, wages and public dues – have changed since the conclusion to the customer upon request.

3. No allowances or other discounts will be granted. Any deduction or trade dis- count requires an explicit written agreement.

4. Absent agreements to the contrary, our invoices will fall due immediately and are to be paid in full.




5. The customer has the right to offset if his counter claims have been established as legally binding, or are acknowledged by us.

6. A retaining lien can be executed by the customer only if his counter claim is rooted in the same contractual relationship.

7. Bills of exchange or cheques do not have a fulfillment effect. We are under no obligation to redeem bills or cheques issued us, not even for the sake of fulfillment. Consequently, we reserve the right to return bills of change or cheques to the customer at latter’s expense. Should we nevertheless accept a bill of change or a cheque, it is for the sake of fulfillment only. Bank discounts, currency exchange fees and other costs will be billed to the customer in every such case.

§ 5 Limitation periods and liability for defects

1. Measures, weigths, images, drawings, samples and descriptions in sales brochures do not constitute an „agreement on product properties“ according to §§ 434, 636 BGB (German Civil Code). For our execution of orders such descriptive data are binding only if they have explicitly been confirmed by us in writing.

2. We are under no obligation to check or comment drawings we receive from the customer. We accept no liability for shortcomings in any of the goods and services rendered by us that result from faulty drawings provided by the customer.

3. Recommendations or samples provided by us are always non-committal. As we have no precise knowledge of the where and how our products or services will be employed, our recommendations or sample will always be provided on a conditional basis. Consequently, we will not be held liable for any faulty or inappropriate recommendations.

4. Should shortcomings or deficiencies be identified at the time of the transfer of perils, we are entitled to supplementary performance, amendment or new production, whichever we choose. Should we fail on making good, the customer has the right to demand price reduction or the rescission of the contract, whichever he chooses. However, our efforts to make good can only be rated as insufficient after three failed attempts, unless the nature of the deficiency or other circumstances suggest otherwise.

5. In case of an infringement of contract (a shortcoming or deficiency) that is obvi- ously insignificant or marginal, as, for example a visual flaw, the customer has no right to rescind the contract. An insignificant resp. marginal infringement of contract is assumed to positively exist whenever shortcomings or deficiencies are only visual in nature while the operability of the goods or services provided is not negatively affected. Rescission of contract will likewise be inacceptable if the grounds for complaint that would otherwise justify a rescission have been largely or solely caused by the customer, if the shortcomings in question have not been caused by us, or if the customer is in default of acceptance.

6. A shortcoming or deficiency as defined by the laws governing warranties can not be supposed to exist if deviations from our specifications, particularly with regard to measurements, dwell within the tolerance range submitted by the respective manufacturer. If damages are caused by customer’s inappropriate or improper use of the product, no warranty will be granted. The same applies with regard to what is so- metimes called planned obsolescence.

7. The customer is obliged to inspect shipments of goods or services immediately after receipt, and to immediately register a complaint about any shortcomings found. §§ 377, 378 HGB (German Civil Code) apply. As long as these paragraphs do not indicate otherwise, the goods or services delivered will be assumed accepted and approved if no complaints are broached within a week of receipt. If shortcomings or deficiencies are not immediately reported, warranty claims by the customer can not be acknowledged.

8. Warranty claims of the customer in relation to shortcomings or deficiencies are subject to a limitation period of twelve months, dating from the commencement of limitation as defined by the law. This does not apply in cases in which §§ 438 Abs. 1 Nr. 2, 634 a Abs. 1 Nr. 2, 479 Abs. 1 BGB (German Civil Code) stipulate longer limitation periods. Furthermore, the limitation period of 12 months will not apply to physical injuries, impairment of health, liability resulting from willful physical injuries, impairment of health, liability resulting from willful intent, concealment of a deficiency, or if we have granted guarantees for properties and condition of the product. Likewise, said limitation will not apply to claims pursuant to the Product Liability Act.

§ 6 Retention of title

1. We will retain title to the delivered items until all and any of our claims vis-à-vis the customer resulting from our business relationship are fulfilled, in particular payment claims.

2. The customer is entitled to sell the reserved goods in the proper course of business unless he is in default in his payments to us. It is impermissible for the customer to pledge the reserved goods or assign them as collateral. The customer is, by way of precaution, surrendering receivables ensuing from such a sale or from another legal issue (illicit practice, insurance) to us presently. The limit of indemnity in case of such a surrender of receivables is 110% of the payment claim to be safeguarded. We herewith declare our acceptance of the surrender. At the same time, we are revocably authorizing the customer to collect the sur- rendered receivables. The authorization to resell the reserved goods will be forfeited immediately if a petition to institute settlement or insolvency proceedings is filed.

3. Any processing or alteration of the delivered goods by the customer shall always be undertaken on our behalf. It is providently agreed already now that, in case the delivered goods are processed and incorporated with other items so that our ownership becomes extinct, we shall acquire co-ownership of the new object in proportion to the relative values contributed. The authorization to process, reconfigure, incorporate or merge the reserved goods will be forfeited immediately if a petition to institute settlement or insolvency proceedings is filed.

4. As long as our retention of title is in force, the customer is obliged to handle the reserved goods with care, and in particular to insure them properly against the common risks, at his expense. Insofar as maintenance and inspection jobs become due the customer will have to commission them at his expense.

5. If the reserved goods are seized by a third party, the customer is obliged to inform that party of our ownership title, and to immediately inform us about the seizure. If the customer disregards this requirement, and if the third party is not able or willing to reimburse us for the ensuing costs, we will hold the customer liable.

6. In case of contractual violations by the customer, in particular in case of payment default, we are entitled to prohibit the resale of the reserved goods, rescind the contract and demand restitution of the reserved goods.

§ 7 Warranty and limitation

1. No warranty shall be accepted in cases of minor, non-essential violations of our contractual duties, unless an intentional breach of contract has been committed by us or our vicarious agent. In cases of slightly negligent violations, our liability is limited to the redress of fairly typical damages that can be expected in contracts of this type. Essential (as opposed to non-essential) contractual duties shall be defined as contractual obligations whose fulfillment is the precondition for the proper execution of the contract, whose observance the contracting party can ordinarily rely on, and whose violation would jeopardize the whole purpose of the contract.

2. The disclaimer of warranty and the liability restrictions will not apply in cases of culpable endangerment of life, body or health, nor to claims based on product liability laws.

3. Inasmuch as the customer has rightful damages compensation claims against us, these will expire within one year after the legal commencement of limitation. This liability limitation will not apply in cases of culpable endangerment of life, body or health, nor to claims based on product liability laws. Nor will it apply in cases of intentional or grossly negligent breach of contract.


§ 8 Tools

1. We will retain ownership of our tools and all tools produced by us, including those placed at the customer’s disposal, until all payments ensuing from the contract have been received.

2. The customer is obliged to insure, at his expense, any tools placed at his disposal that are still our property, against damage or loss due to fire, water or theft. Furthermore, the customer already now and herewith assigns any and all compensation claims ensuing from such insurance to us. We herewith accept the assignment.

3. The customer cannot acquire property rights to our tools until these tools have been paid in full. If this is the case, tools (including any tools placed at the customer’s disposal by us) that are stored on our premises will have to be picked up by the customer, at his expense, within 12 months after the most recent delivery of goods or services. Should the customer neglect to pick up the tools within said period we are entitled to set him a further deadline of two months for the collection of the tools. After expiration of that period we are entitled to put the tools in storage or to dispose of them, at the customer’s expense.

4. Manufacturing costs for tools that are custom-made for the customer will be borne by the customer, including maintenance costs as well as all expenses for the possible restocking and/or repair of such custom-made tools, unless the loss or deterioration of the tools is demonstrably our fault.

§ 9 Applicable Law and Legal Venue

1. The laws of the Federal Republic of Germany apply to all legal relationships between us and the customer. The provisions of the UN Sales Convention (CISG) do not apply.

2. The place of performance for both contracting partners shall be Pfaffenhofen, Germany.

3. The legal venue shall be the court (Amtsgericht or Landgericht) having jurisdiction over the place of performance.

§ 10 Severability Clause

Should individual provisions of the contract, including these general terms and conditions, be or become invalid fully or in part, the validity of the remaining provisions will not be affected.




BICO GmbH

Industriestraße 17 74397 PfaffenhofenGermany

Phone: +49 7046 - 9613-0 Fax: +49 7046 - 9613-20 E-Mail: [email protected] Internet: www.bico-gmbh.de

CONTACT ADRESS


BICO GmbH

Industriestraße 17 D-74397 Pfaffenhofen

Phone: +49 7046/9613-0 Fax: +49 7046/9613-20 E-Mail: [email protected] Internet: www.bico-gmbh.de

BAKERY SUPPLIES - BICO · excellent baking characteristics but is subject to erosion. Area of...

Documents

Transcript of BAKERY SUPPLIES - BICO · excellent baking characteristics but is subject to erosion. Area of...