Bag Emptier En

8/16/2019 Bag Emptier En

1/12

Scanmatic Bag EmptierSSM3-100, 1000, 1200 & 1400

Scanmatic bag emptier is efficient and simple.

Efficient emptying. Simple and secure design. Hi grade of automatization.

Manufactured in three models SSM3-100 1000, 1200 and 1400


2/12

Scanmatic Bag EmptierSSM3-100, 1000, 1200 & 1400

FUNCTION

From a conveying belt, slide plate or for example a lifting table the sack is pushed on tothe internal conveying belt in the machine.

This internal conveying belt which is totally enclosed and mounted to the machinetransports the bag into the machine through a cutting aggregate that cuts the bag open on

both sides.

The cut up bag with material falls into the spinning grid drum where the bag is emptied.The size of mesh depends of the material to be emptied. Standard size of mesh is 30 x30mm.

The material passes through the net down to a conical trough with an outlet flange wherefurther transport equipment takes over.

The emptied bag is carried by the rotated drum to the end of it and there it falls downinto a shaft. The compactor SSK5 is a additional equipment and fits onto the shaft.

Equipment and performance

Capacity: Min 100 bags/h and up to 400 bags/h, depending of the type of bag, materialgoods characteristics and the length of the drum in the machine.

Example of capacitySSM3-100. 1000mm length of drum 250 20kg cement bag per hourSSM3-100. 1200mm length of drum 300 20kg cement bag per hourSSM3-100. 1400mm length of drum 350 20kg cement bag per hour

Additional equipment:

1. Cartridge air filter with mechanical or pneumatic cleanin2. Compactor, SSK4 or SSK53. Feeding belt conveyor4. Lifting table5. Vacuum lift6. Worm conveyor


3/12

BAG EMPTIERS


4/12

Web: ww w.sc anmat ic .se Phon e: +46 42 504 25 Fax: +46 42 515 71

ONE-BAG SLITTER SSM2-1

TS01-001

One-bag slitter SSM2-1


5/12


ONE-BAG SLITTER SSM2-1

TS01-001

Function

The One bag emptier is a simple manual bag emptier machine. In basic design the machine hasfollowing function. The operator places the bag on the grate table. Then he pushes the table into the machine and thebag is cut open by a knife on the underside.With both hands he grip the bag halves and shake them empty.When the bag is emptied he can withdraw the table and put away the emptied bag.

Accessories

To handle dusting or in other ways dangerous material it is important to close the system as much aspossible.Following accessories is available:

- Filter unit 4 m2 or 7 m2 with fan to place directly on the top of the machine.- Sound damper for the filter unit.- Connection case on the bag emptier machine to directly connection of our bag compactor

SSK 4.- Lifting table and other arrangements to minimum lifting bags.


6/12


BAG SLITTER SSM3-100

TS04-002

Bag slitter SSM3-100


7/12



TS04-002

Function

From a conveying belt, slide plate or for example lifting table the sack is pushed in to the machinesinternal conveying belt.

This internal conveying belt that is totally enclosed and assembled in the machine transports the sackin the machine over a double cutting aggregate that cuts the sack effective on the top and bottomside.

The slotted sack with material falls in to the spinning grinded drum where the sack is emptying. Themesh nets size is depended on the material to be emptied. Standard mesh net is 30 x 30 mm.

The material passes through the net down to a conical trough whit an out let flange where futuretransport equipment takes over.

The emptied sack in the rotated drum falls down to a shaft and possibly in to the compactor, SSK5,which is additional equipment.

Equipment and performance

Capacity: Min 100 sacks/h and up to 400 sacks/h, depending on sack type, material goodscharacteristics and length of the drum in the machine.

Capacity example

SSM3-100. 1000mm drum length 250 sacks 20kg cement sack per hour




8/12



TS04-002

Wastage

The goods waste is depending on type of sack and goods characteristics. The eventual wastage isfollowing the sack down the shaft. Example: 20kg cement, 0.1-1 mm/particle in paper sack gives less

than 0.2% wastage.

Surface finish

Painting program according to Scanmatic standard TS-7000 It can also be delivered in stainless steelor other customers demands.

Electrical connection

400 V, 50 Hz, IP 56, 16 A Additional components as lifting table, filter, feeding belt conveyor etc.(components that is bulky for transportation) assemblies by electrician in place.

Air connection

8mm instrumental air hose

Emptying time

Emptying time is that time the sack is placed in the drum. This time is varying depend on the materialand type of sack. By delivery the machine is adjusted to maximum emptying time. To accomplishshorter emptying time one have to dismantle the pointed axel which is screwed on the inside of thedrum. The feeding time has to be adjusted to the emptying time.

Additional components (see product catalogue)− Cartridge air filter with mechanical cleaning− Compactor. SSK4 or SSK5− Feeding belt conveyor− Lifting table− Vacuum lift− Screw conveyor


9/12

Web: ww w.sc anmati c.se Phon e: +46 42 504 25 Fax: +46 42 515 71

BIG BAG EMPTIER SSS2

TS04-003

Big bag emptier SSS2

Robust and flexible construction

5 0 0

1 4 2 8

800900

1380 Side view Top view


10/12

Web: ww w.sc anmati c.se Phon e: +46 42 504 25 Fax: +46 42 515 71

BIG BAG EMPTIER SSS2

TS04-003

FUNCTION

The Big Bag Emptier is an emptier where the big bag by means of suitable lifting equipment islowered down over the emptier and thereby the bag will be cut up in the bottom by pointed knives.

On the upper side there is a rubber cuff, which is shaped in accordance with the bag and thereforegives a dust-tight connection.

Standard of equipment− Support legs with rubber dampers for suspension− Vibrating motor 230/400 V, 50 Hz, 600 W− Outlet connection NV 250/PN10− Suitable for big bags with diameter 1100 or smaller− Manufactured in normal steel and surfaced according to Scanmatic standard painting

program

Optional equipment− Double rubber cuffs to avoid dust− Centered arms to fixate the big bag− Broadened knife for wider cutting of the big bag− H-knife for alternative cutting of the big bag− Hatch in the emptier funnel− Lifting device for lifting with electric telpher− Extended lifting device for lifting with fork truck− Stand for electric telpher

− Fluidization to prevent arching in the emptier funnel

Special

The Big Bag emptier can also be manufactured for other dimensions of the big bag, other outletconnection and in other materials e.g. stainless steel.

The knife cross is demountable and easy toadjust to get a wider cut.


11/12


LIFTING YOKE

TS04-004

Lifting yokeLifting yoke for lifting with hoist or overhead crane

1230

10 0Ø

9 2

0


12/12


VACUUM LIFT VM180

TS13-006

Vacuum lift VM180

Vacuum lift for bagsLift capacity: 80 kgRange: 2,6m

Bag Emptier En

Documents

Transcript of Bag Emptier En