B3.5 Dimensions 2017 - Tillett
1
The B3.5 seat dimensions The B3.5 seat weighs only 2.1kg and has been made to allow fitment into some of the narrowest vehicles around. It holds the driver in a comfortable inclined racing position. The belt holes have been optimised to enable the use of a Hans device and allow a full racing harness to be used (5 or 6 point harnesses are recommended on an inclined seat). The seat is supplied with a removable Dinamica ® suede covered headrest pad as standard and can also be supplied with matching back and cushion panels at extra cost. The B3.5 is a thin flexible shell. This seat needs supporting with a framework or from bulkheads and roll bars. The recommended mounting points are shown below and we suggest using our special fittings to attach to your fixing points. At least one fixing point must be at headrest level under the pad and two high up under the arms. We also suggest creating two mounting points on the side at chest level. B3.5 36 cm internal 33 cm external 81 cm 81cm 17 cm 37 cm internal 43 cm external dimension 106 cm Tillett Racing Seats Styles Close Sittingbourne Kent ME10 3BF England TEL : 01795 420 312 FAX : 01795 478 821 [email protected] www.tillett.co.uk 40°
Transcript of B3.5 Dimensions 2017 - Tillett
The B3.5 seat dimensions
The B3.5 seat weighs only 2.1kg and has been made to allow fitment into some of the narrowest vehicles around. It holds the driver in a comfortable inclined racing position. The belt holes have been optimised to enable the use of a Hans device and allow a full racing harness to be used (5 or 6 point harnesses are recommended on an inclined seat).
The seat is supplied with a removable Dinamica ® suede covered headrest pad as standard and can also be supplied with matching back and cushion panels at extra cost.
The B3.5 is a thin flexible shell. This seat needs supporting with a framework or from bulkheads and roll bars. The recommended mounting points are shown below and we suggest using our special fittings to attach to your fixing points. At least one fixing point must be at headrest level under the pad and two high up under the arms. We also suggest creating two mounting points on the side at chest level.
B3.5
36 cminternal
33 cm external
81 cm
81cm
17 cm
37 cminternal
43 cm external dimension
106 cm
Tillett Racing SeatsStyles CloseSittingbourneKentME10 3BFEnglandTEL : 01795 420 312 FAX : 01795 478 [email protected] www.tillett.co.uk
40°
