A�rmaTM

1 2 ' (3.66 m) 1 5 ' (4.57m)1 8 ' (5.49 m) 2 1 ' (6.40 m)2 4 ' (7.32 m) 2 7 ' (8.23 m)

Have a splash with summer -

steel an economical above

ground pool !

10' x 22' (3.15m x 6.72m)12' x 24' (3.66m x 7.32m)15' x 25' (4.57m x 7.63m)15' x 30' (4.57m x 9.14m)

A�rmaTM

— Dune wall

corrugation

wall joint

The A�rma’s steel structure is entirely protected by a variety of �nishes. These optimize its resistance to corrosion while preventing condensation betweenthe liner and the wall – ensuring a long, solid life for your pool.

www.voguepools.com

water safetyYour above ground pool has been designed to provide you with years of safe, family fun. This entails that water safety must always be taken into account. When used incorrectly, your above ground swimming pool can be dangerous; above ground pools are shallow, and this makes diving and jumping unsafe. To ensure your above ground pool is used safely you must observe the safety precautions that are provided to you when you purchase an above ground pool and conform to all local regulations.

The dimensions, weights, illustrations and other speci�cations are approximate.The company reserves the right to modify and/or discontinue without noti�cation any feature in any pool model. © Copyright 2013• B300-279A 12/13

A rippled �nish lets the wall resist both water pressure and external shocks.

• Computer-designed wall joint ensures better resistance to water pressure • Wall reinforced with steel bars • Oversized bolts augment stability

Vog-lokTM system• Pre-grooved parts to make screw installation easy• Screws lock in place to maintain structural integrity• Concept exclusive to Vogue

lateral supportsOval System• More lateral supports on the straight sides of the oval pool, where they are needed most• Angle base plates to ensure greater stability• Pressure plates to reinforce the connection of the straight and round portions of the oval pool

structure• 6-inch (15 cm) multi ribbed top ledge• 5-inch (12 cm) fully supportive upright• SynproTM resin decorator ledge cover; -Won’t chip, peel or splinter -Tie-in support to the upright for greater rigidity -Flush design eliminates exposed screws