AZETA Round Specification Sheets
4
N.B. These products require clear airflow to maintain the LED junction temperature and lifetime of the product. Please refer to the installation instructions for necessary volumetric air details. This acdc product is • Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency • Supplied with a 5 year guarantee Materials: Die cast, powder coated aluminium Trim Finish: Black satin, white. Reflector: White, black, satin silver. Formats: Fixed, self-locking, geared adjustable and wallwash formats available. Adjustabilty: Tilt, rotate and lock via micro adjustable gearing mechanism. Front adjustments allowing for quick and simple hot focusing on site. Beam angles: Interchangeable optics facility: 15°, 24°, 36°, 45° (Wall wash supplied with 45° as standard with spreader lens to provide smooth beam distribution). Accessories: Accessory holder accommodates two accessories as standard: solite lens, honeycomb louvre. Field changeable. Installation: Spring clip Heatsink: Advanced acdc heat sink with thermo dynamic, liquid cooling technology. Temperature: From -10°C to 40°C Glare control: Deep recessed LED position for minimal glare. Solite lens and honeycomb louvre. Cutout: 106mmØ Specification Codes Fixed Adjustable Wallwash Luminaire Performance Product acdc1177 Trim White TWH Black Satin TBL Reflector White WHI Black BLK Satin Silver SAT Light Engine H50 (Formerly known as Spirit) 50H H35S (Formerly known as Little Spirit) 35S Colour Temp 2700ºK 27 3000ºK 30 4200ºK 42 6000ºK 60 Optics 15º 15R 24º 24R 36º 36R 45º 45R Model Fixed FXD Adjustable ADJ Wallwash WWA Accessories No Lens N Solite Lens DGS Honeycomb Louvre HCL IP Rating IP20 IP20 IP44 IP44 acdc1177 Dimming Switched SWT 1-10v 1-10 Phase PHA Dali DAL DMX DMX None supplied NS Technical geared architectural round LED downlights with 20W & 35W metal halide output performance, delivering 700lm & 1300lm. Available in fixed, adjustable & wallwash formats. IP20/IP44 Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70 Initial lamp Lumen output*: H50 1909lm, H35S 1050lm Lamp lumens inc thermal and optical losses*: H50 1565lm, H35S 861lm Luminaire Lumens output*: H50 1311lm, H35S 721lm Power consumption (inc 85% efficient driver): H50 18W, H35S 9.84W Efficacy (lm/W)*: H50 74.49, H35S 73.28 CRI: 80 Binning: All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency across a project. Colour Temperature: 2700°K, 3000°K, 4200°K, 6000°K Driver: Switched, 1-10v, Phase, Dali, DMX EM: Can be used as an emergency luminaire when specified with an emergency driver. Please consult your acdc representative. Listings: CE, ETL us/c IP rating: IP20, IP44 Warranty: 5 years Max weight: 690g *Based on 3000ºK with 15º optics Specification subject to change without notice. Refer to our website for the most recent product documentation. 120mm 119mmØ Cutout = 106mmØ 130mm 119mmØ Cutout = 106mmØ 120mm 119mmØ Cutout = 106mmØ Specification sheet C SPG101 July 2015 IP20 IP44 acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365 acdclighting.com/LED/AZETA AZETA SMALL ROUND acdc1177
Transcript of AZETA Round Specification Sheets
N.B. These products require clear airflow to maintain the LED junction temperature and lifetime of the product. Please refer to the installation instructions for necessary volumetric air details.
This acdc product is• Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency• Supplied with a 5 year guarantee
Materials: Die cast, powder coated aluminiumTrim Finish: Black satin, white.Reflector: White, black, satin silver.Formats: Fixed, self-locking, geared adjustable and wallwash formats available.Adjustabilty: Tilt, rotate and lock via micro adjustable gearing mechanism. Front adjustments allowing for quick and simple hot focusing on site.Beam angles: Interchangeable optics facility: 15°, 24°, 36°, 45° (Wall wash supplied with 45° as standard with spreader lens to provide smooth beam distribution).Accessories: Accessory holder accommodates two accessories as standard: solite lens, honeycomb louvre. Field changeable.Installation: Spring clipHeatsink: Advanced acdc heat sink with thermo dynamic, liquid cooling technology.Temperature: From -10°C to 40°CGlare control: Deep recessed LED position for minimal glare. Solite lens and honeycomb louvre.Cutout: 106mmØ
Specification Codes
Fixed Adjustable Wallwash
Luminaire Performance
Product
acdc1177
Trim
White TWH
BlackSatin TBL
Reflector
White WHI
Black BLK
Satin Silver SAT
Light Engine
H50 (Formerly known as
Spirit)
50H
H35S (Formerly
known as Little Spirit)
35S
Colour Temp
2700ºK 27
3000ºK 30
4200ºK 42
6000ºK 60
Optics
15º 15R
24º 24R
36º 36R
45º 45R
Model
Fixed FXD
Adjustable ADJ
Wallwash WWA
Accessories
No Lens N
Solite Lens DGS
HoneycombLouvre HCL
IP Rating
IP20 IP20
IP44 IP44
acdc1177
Dimming
Switched SWT
1-10v 1-10
Phase PHA
Dali DAL
DMX DMX
None supplied NS
Technical geared architectural round LED downlights with 20W & 35W metal halide output performance, delivering 700lm & 1300lm. Available in fixed, adjustable & wallwash formats. IP20/IP44
Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70Initial lamp Lumen output*: H50 1909lm, H35S 1050lmLamp lumens inc thermal and optical losses*: H50 1565lm, H35S 861lmLuminaire Lumens output*: H50 1311lm, H35S 721lm Power consumption (inc 85% efficient driver): H50 18W, H35S 9.84WEfficacy (lm/W)*: H50 74.49, H35S 73.28CRI: 80Binning: All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency across a project.Colour Temperature: 2700°K, 3000°K, 4200°K, 6000°K Driver: Switched, 1-10v, Phase, Dali, DMXEM: Can be used as an emergency luminaire when specified with an emergency driver. Please consult your acdc representative.Listings: CE, ETL us/cIP rating: IP20, IP44Warranty: 5 yearsMax weight: 690g*Based on 3000ºK with 15º optics
Specification subject to change without notice. Refer to our website for the most recent product documentation.
12
0m
m
119mmØCutout = 106mmØ
130m
m
119mmØCutout = 106mmØ
120m
m
119mmØCutout = 106mmØ
Specification sheet
C SPG101 July 2015
IP20 IP44
acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365
acdclighting.com/LED/AZETA
AZETA SMALL ROUNDacdc1177
N.B. These products require clear airflow to maintain the LED junction temperature and lifetime of the product. Please refer to the installation instructions for necessary volumetric air details.
This acdc product is• Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency• Supplied with a 5 year guarantee
Materials: Die cast, powder coated aluminiumTrim Finish: Black satin, white.Reflector: White, black, satin silver.Formats: Fixed, self-locking, geared adjustable and wallwash formats available.Adjustabilty: Tilt, rotate and lock via micro adjustable gearing mechanism. Front adjustments allowing for quick and simple hot focusing on site.Beam angles: Interchangeable optics facility: 36°, 54° (Wall wash supplied with 54° as standard with spreader lens to provide smooth beam distribution).Accessories: Accessory holder accommodates two accessories as standard: solite lens, honeycomb louvre. Field changeable.Installation: Spring clipHeatsink: Highly effective heat sink design for optimal heat dissipationTemperature: From -10°C to 40°CGlare control: Deep recessed LED position for minimal glare. Solite lens and honeycomb louvre.Cutout: 106mmØ
Specification Codes
Fixed Adjustable Wallwash
Luminaire Performance
Product
acdc1177
Trim
White TWH
BlackSatin TBL
Reflector
White WHI
Black BLK
Satin Silver SAT
Light Engine
Xicato XTM 1300Standard
XTM
Xicato XTM 1300
ArtistXTM-ART
XicatoXTM 1300Vibrant(3000ºK
only)
XTM-VIB
Colour Temp
2700ºK XTM27
3000ºK XTM30
4000ºK XTM40
Optics
36º 36R
54º 54R
Model
Fixed FXD
Adjustable ADJ
Wallwash WWA
Accessories
No Lens N
Solite Lens DGS
HoneycombLouvre HCL
IP Rating
IP20 IP20
IP44 IP44
acdc1177
Dimming
Switched SWT
1-10v 1-10
Phase PHA
Dali DAL
DMX DMX
None supplied NS
Technical geared architectural round LED downlights with 20W & 35W metal halide output performance, delivering 1000lm. Available in fixed, adjustable & wallwash formats. IP20/IP44
Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70Initial lamp Lumen output*: 1300lmLamp lumens inc thermal and optical losses*: 1118lmLuminaire Lumens output*: 1021lmPower consumption (inc 85% efficient driver): 15WEfficacy (lm/W)*: 68.07CRI: 83Binning: All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency across a project.Colour Temperature: 2700°K, 3000°K, 4000°KDriver: Switched, 1-10v, Phase, Dali, DMXEM: Can be used as an emergency luminaire when specified with an emergency driver. Please consult your acdc representative.Listings: CE, ETL us/cIP rating: IP20, IP44Warranty: 5 yearsMax weight: 690g*Based on XTM 1300 Standard, 3000ºK with 36º optics
Specification subject to change without notice. Refer to our website for the most recent product documentation.
133m
m
119mmØCutout = 106mmØ
136m
m
119mmØCutout = 106mmØ
136m
m
119mmØCutout = 106mmØ
Specification sheet
C SPG101 July 2015
IP20 IP44
acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365
acdclighting.com/LED/AZETA
AZETA SMALL ROUND XICATOacdc1177
N.B. These products require clear airflow to maintain the LED junction temperature and lifetime of the product. Please refer to the installation instructions for necessary volumetric air details.
This acdc product is• Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency• Supplied with a 5 year guarantee
Technical, geared, recessed, round architectural LED downlight – 30W delivering 2450lm – heat pipe technology heat dissipation – IP20/IP44 – choice of dimming options – fixed, adjustable, wallwash formats.
Specification Codes
Fixed Adjustable Wallwash
Product
acdc1178
Trim
White TWH
BlackSatin TBL
Reflector
White WHI
Black BLK
Satin Silver SAT
Light Engine
MH35 (Formerly known as
Angel)
35M
Colour Temp
2700ºK 27
3000ºK 30
4200ºK 42
6000ºK 60
Optics
15º 15R
24º 24R
36º 36R
45º 45R
Model
Fixed FXD
Adjustable ADJ
Wallwash WWA
Accessories
No Lens N
Solite Lens DGS
HoneycombLouvre HCL
IP Rating
IP20 IP20
IP44 IP44
35Macdc1178
Dimming
Switched SWT
1-10v 1-10
Phase PHA
Dali DAL
DMX DMX
None supplied NS
Luminaire PerformanceMaterials: Die cast, powder coated aluminiumTrim Finish: Black satin, white.Reflector: White, black, satin silver.Formats: Fixed, self-locking, geared adjustable and wallwash formats available.Adjustabilty: Tilt, rotate and lock via micro adjustable gearing mechanism. Front adjustments allowing for quick and simple hot focusing on site.Beam angles: Interchangeable optics facility: 15°, 24°, 36°, 45° (Wall wash supplied with 45° as standard with spreader lens to provide smooth beam distribution).Accessories: Accessory holder accommodates two accessories as standard: solite lens, honeycomb louvre. Field changeable.Installation: Spring clipHeatsink: Advanced acdc heat sink with thermo dynamic, liquid cooling technology.Temperature: From -10°C to 40°CGlare control: Deep recessed LED position for minimal glare. Solite lens and honeycomb louvre.Cutout: 131mmØ
Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70Initial lamp Lumen output*: 3545lmLamp lumens inc thermal and optical losses*: 2907lmLuminaire Lumens output*: 2461lmPower consumption (inc 85% efficient driver): 31WEfficacy (lm/W)*: 79.8CRI: 80Binning: All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency across a project.Colour Temperature: 2700°K, 3000°K, 4200°K, 6000°K Driver: Switched, 1-10v, Phase, Dali, DMXEM: Can be used as an emergency luminaire when specified with an emergency driver. Please consult your acdc representative.Listings: CE, ETL us/cIP rating: IP20, IP44Warranty: 5 yearsMax weight: 1100g*Based on 3000ºK with 15º optics
Specification subject to change without notice. Refer to our website for the most recent product documentation.
145 x 145mm
122mm
Cutout = 131 x 131mm
15
0m
m
145 x 145mm
Cutout = 131 x 131mm
130mm
145 x 145mm
Cutout = 131 x 131mm
Specification sheet
IP20 IP44
C SPG101 July 2015acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365
acdclighting.com/LED/AZETA
AZETA LARGE ROUND acdc1178
N.B. These products require clear airflow to maintain the LED junction temperature and lifetime of the product. Please refer to the installation instructions for necessary volumetric air details.
This acdc product is• Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency• Supplied with a 5 year guarantee
Technical, geared, recessed, round architectural LED downlight – 30W delivering 2150lm – heat pipe technology heat dissipation – IP20/IP44 – choice of dimming options – fixed, adjustable, wallwash formats.
Specification Codes
Fixed Adjustable Wallwash
Product
acdc1178
Trim
White TWH
BlackSatin TBL
Reflector
White WHI
Black BLK
Satin Silver SAT
Light Engine
XicatoXTM 3000Standard
XTM
XicatoXTM 3000Vibrant(3000ºK
only)
XTM-VIB
Colour Temp
2700ºK XTM27
3000ºK XTM30
4000ºK XTM40
Optics
21º 21R
48º 48R
Model
Fixed FXD
Adjustable ADJ
Wallwash WWA
Accessories
No Lens N
Solite Lens DGS
HoneycombLouvre HCL
IP Rating
IP20 IP20
IP44 IP44
acdc1178
Dimming
Switched SWT
1-10v 1-10
Phase PHA
Dali DAL
DMX DMX
None supplied NS
Luminaire PerformanceMaterials: Die cast, powder coated aluminiumTrim Finish: Black satin, white.Reflector: White, black, satin silver.Formats: Fixed, self-locking, geared adjustable and wallwash formats available.Adjustabilty: Tilt, rotate and lock via micro adjustable gearing mechanism. Front adjustments allowing for quick and simple hot focusing on site.Beam angles: Interchangeable optics facility: 21°, 48° (Wall wash supplied with 48° as standard with spreader lens to provide smooth beam distribution).Accessories: Accessory holder accommodates two accessories as standard: solite lens, honeycomb louvre. Field changeable.Installation: Spring clipHeatsink: Highly effective heat sink design for optimal heat dissipationTemperature: From -10°C to 40°CGlare control: Deep recessed LED position for minimal glare. Solite lens and honeycomb louvre.Cutout: 131mmØ
Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70Initial lamp Lumen output*: 3000lmLamp lumens inc thermal and optical losses*: 2850lmLuminaire Lumens output*: 2698lmPower consumption (inc 85% efficient driver): 33WEfficacy (lm/W)*: 65.45CRI: 83Binning: All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency across a project.Colour Temperature: 2700°K, 3000°K, 4000°K,Driver: Switched, 1-10v, Phase, Dali, DMXEM: Can be used as an emergency luminaire when specified with an emergency driver. Please consult your acdc representative.Listings: CE, ETL us/cIP rating: IP20, IP44Warranty: 5 yearsMax weight: 1100g*Based on XTM 3000 Standard, 3000ºK with 21º optics
Specification subject to change without notice. Refer to our website for the most recent product documentation.
149mm
145mmØCutout = 131mmØ
160mm
145mmØCutout = 131mmØ
151mm
145mmØCutout = 131mmØ
Specification sheet
IP20 IP44
C SPG101 July 2015acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365
acdclighting.com/LED/AZETA
AZETA LARGE ROUND XICATO acdc1178
