Axle spacing determining
2
Huỳnh Ngọc Tuấn – 0905480886 – S: huynhtuan_qn – E: [email protected] AXLE SPACING DETERMINING Applications • Advanced traffic detection including vehicle counting, classification, speed measurement and vehicle length measurement. • Automatic vehicle classification system at Toll Collection System. • WIM system support providing axle count and classification data, communications and data logging. Features o Infra-red sensor detection system. o It is non-invasive equipment, consists of a transmitter unit and a receiver unit on opposite sides of a lane traffic. o Determine the speed of each axle vehicles. o Vehicle classification based on axle counts, axle spacing, and wheel base. o Vehicle speed measurement when the vehicle moves slowly and velocity variations. o Identification axle (circular shape), distinguish between real wheels with foot pedestrians or obstructions not shaped wheel. o Resistant to sunlight, rain, dust and fog. o Easy installation and quickly.
-
Upload
tuan-huynh -
Category
Engineering
-
view
18 -
download
0
Transcript of Axle spacing determining
Huỳnh Ngọc Tuấn – 0905480886 – S: huynhtuan_qn – E: [email protected]
AXLE SPACING DETERMINING
Applications
• Advanced traffic detection including vehicle
counting, classification, speed measurement
and vehicle length measurement.
• Automatic vehicle classification system at
Toll Collection System.
• WIM system support providing axle count
and classification data, communications and
data logging.
Features
o Infra-red sensor detection system.
o It is non-invasive equipment, consists of a transmitter unit and a receiver unit on
opposite sides of a lane traffic.
o Determine the speed of each axle vehicles.
o Vehicle classification based on axle counts, axle spacing, and wheel base.
o Vehicle speed measurement when the vehicle moves slowly and velocity variations.
o Identification axle (circular shape), distinguish between real wheels with foot
pedestrians or obstructions not shaped wheel.
o Resistant to sunlight, rain, dust and fog.
o Easy installation and quickly.
Huỳnh Ngọc Tuấn – 0905480886 – S: huynhtuan_qn – E: [email protected]
Specifications
- Speed measurement: 1 ~ 30 km/h (maximum speed: 200 km/h)
- Accuracy: ±3% (1 ~ 15 km/h)
- Interface: RS232/RS485
- Output: 2 output 5VDC PNP
- Input: 2 input 5VDC PNP
- Report: axles speed, axle spacing
- Housing: Inox 304
- Dimensions: 150x150x250 mm
- Power input: 5VDC,1A
- Operating temperature: 0°C ~ 40°C
Layout at lane traffic
