![DESIGN VERIFICATION TEST REPORT...3.15 . Comparison Push vs. Pull ebm-papst 412H 3.16 Résumé ebm-papst 412 ebm-papst 412H Pull cooling Push cooling Pull cooling Push cooling [m³/h]](https://static.fdocuments.net/doc/165x107/5f0989a47e708231d4274d86/design-verification-test-report-315-comparison-push-vs-pull-ebm-papst-412h.jpg)
AxiCool fans - ebm-papst SEA … · versions of the axial fan are available: A standard version, a...
4
AxiCool fans A breath of fresh air in refrigeration technology The engineer‘s choice
Transcript of AxiCool fans - ebm-papst SEA … · versions of the axial fan are available: A standard version, a...
AxiCool fansA breath of fresh air in refrigeration technology The engineer‘s choice
AxiCool sets ...new standards in the evaporator and cooling unit market. Not least thanks to the level of system efficiency achieved through the perfect interaction of the individual components. And that’s not the only good thing about AxiCool: The compact axial fan is also extremely easy to handle and offers outstanding efficiency throughout whilst making sparing use of resources. Convenient service, ease of operation and excellent air throw round off the spectrum of positive features. The AxiCool fans are based on the HyBlade® product range.
Top efficiency
The ErP Directive sets out stringent specifications to come into
effect in 2015. So it is reassuring to know that these specifications
on binding limit values are already surpassed by ebm-papst and that
all the benefits of this superior efficiency are there for customers to
enjoy. In a nutshell: AxiCool can reduce power consumption by up to
25 %. What’s more, ideal system regulation guarantees highly effi-
cient operation – even at part load. And last but not least, optimised
cooling and thawing cycles also help to enhance efficiency.
Customer benefits
– Efficiency specifications as per ErP 2013 and ErP 2015 already
surpassed today
– Up to 25 % lower power consumption
– Highly efficient operation even at part load
– Optimised cooling and thawing cycles
Truly sustainable
In our view ecology, sustainability and economical operation are
inseparable issues. This “GreenTech” concept is embedded in the
ebm-papst philosophy and characterises the entire life cycle: It
stands for recycling, waste avoidance, ecological materials, lower
emission levels, reduced energy consumption and hence greater
efficiency. AxiCool for instance attains just such efficiency with a
GreenTech EC motor, which operates at various speed settings or
with regulation by way of a linear interface. In addition, the AxiCool
product range supports the concept of sustainability with a par-
ticularly long service life. It is often possible to preserve resources
with simple means: From the outset, AxiCool was designed to have
smooth surfaces to facilitate cleaning and so save water.
Customer benefits
– GreenTech concept combining ecology, sustainability and economi-
cal operation through the use of a GreenTech EC motor for example
– Preservation of resources by using less water
Installation made simple
Plug and Play: There is no longer any need to worry about aligning
and gap dimensions. Just four screws are required for fitting the
AxiCool! Quick and easy. And thanks to the connection line, fan
installation takes no time at all.
Customer benefits
– Quick mounting with just four screws
– Simple installation by way of the connection line
A concept with a future
Setting tomorrow‘s standards today
32
4, 3, 2, 1 – done! Four screws and the AxiCool is fitted.
Ecology and preservation of resources – two of the factors in the AxiCool success story.
Size 350 for example: 25 % lower power consumption than an AC fan.
150
100
50
200
W
74 65
Perfection means a perfect match
The AxiCool product range has an important function to fulfil: Namely, to keep food in cold storage fresh under hygienic conditions. That’s why AxiCool is specially designed to ensure an ideal environment right from the start – with the emphasis on hygiene and food safety.
Maximum hygiene, optimum food safety
A high standard of refrigeration is required to maintain the quality of stored
products – only minimal temperature fluctuations and drying-out of the
refrigerated items is permissible and the thawing cycles must be short. All
these conditions are satisfied by the ideal distribution of cold air in the cold
store and innovative concepts such as the patented wall ring design.
AxiCool is fully equipped to meet special challenges such as cheese
maturing processes or the storage of sensitive fruit and vegetables.
With regard to hygiene, AxiCool cuts no corners. AxiCool features a high
level of splash water protection (up to IP 54) and smooth surfaces with no
visible screws. The great advantage: Dirt cannot get a grip. And the hinge
function ensures easy cleaning of the heat exchanger to HACCP
specifications. Simply unfasten the screws, open up the fan and perform
cleaning.
Innovation meets perfection
Whichever version of the AxiCool series you decide on: You can be
sure of making the right choice, as the innovative features incorpo-
rated into this product range always produce perfect results. Four
versions of the axial fan are available: A standard version, a version
with hinge for easier cleaning or with air-guiding system for ideal
cold storage air distribution and a high-end version with hinge and
air-guiding system offering the full range of advantages.
The fans can be supplied as size 300, 350 and 450 mm models with
AC or GreenTech EC motor to suit all requirements: For instance,
AxiCool is also available for both air flow directions. In addition,
the EC technology permits control by way of two speed settings or
regulation via a linear interface.
The adjacent symbols highlight the winning features of the entire
AxiCool series at a glance.
System efficiency: From Standard to High-End
No matter how efficient the components are, the overall result will only be ideal if everything is in perfect balance: System efficiency. So it is good to know that the AxiCool product range operates on precisely this principle.
AxiCool air performance range. Four versions of the same convincing concept: Standard, with hinge, with air-guiding system and high-end model.
1000 2000 3000 4000 5000 6000
40
80
20
100
60
120
Ø 300
Ø 350
Ø 450Pap s
f
qV m3/h
Innovative materials – HyBlade® impeller made of composite
material
High efficiency – More efficient than other fans on the
market thanks to profiled blade geometry
and winglets
Quiet operation – Aerodynamically optimised shape reduces
noise by up to 4 dB(A) as compared to
other fans available to date
HyBlade® impeller
Unrivalled compact design – Single axial fan unit: Direct integration of
external rotor motor into axial impeller
Outstanding energy efficiency – High degree of efficiency
– Low energy consumption with values already
surpassing stringent specifications of ErP
Directive for 2015
– Less waste heat
Extremely robust – Safety class IP 54 for optimum splash water
protection
Precision control – Exact regulation of air flow – with
0-10 V linear or PWM input and speed signal
for controlled operation
Long service life– Extremely durable thanks to maintenance-free
ball bearings and brushless commutation
GreenTech EC motor
Particularly easy servicing – Hinge mounting allows fan to be
simply opened up
– Easy cleaning of heat exchanger
Hinge
Rugged design – Standard version with flat metal safety
grille: Simple mechanical cleaning in
the event of ice formation
– Versions with air-guiding system are
applied with a support bracket
Extra splash water protection – Motor cover guards against splash
water
AxiCool with hinge – and cleaning becomes child’s play.
EfficiencyLow power consumption High air performance
Power density High aerodynamic efficiency High reserve capacity
Regulation / control Adjustment of air performance to suit requirements
Noise reduction Low noise emissions
Plug & play Uncomplicated installation and commissioning
Compact designLittle space required
Sustainability Preservation of resour- ces in development, pro-duction and operation
AxiCool benefits at a glance:
Shorter thawing cycles – Two-piece plastic wall ring with integrated
channels for water drainage, thus reducing
ice formation
Simple retrofitting – Convenient retrofitting of heating tape:
For optimised thawing cycles and reduced
transfer of heat into cooling chamber
Rapid installation – Quick and easy to fit with 4 screws
Aerodynamically optimised– Innovative efficiency-enhancing shape
– Quiet running thanks to ideal aerodynamic
design
Convenient cleaning– Easy-clean surfaces to satisfy maximum
hygiene standards
Patented cavity wall ring
Safety grille
Keeping fresh produce at its best
Optimised distribution with air-guiding system.
Cold air distribution without air-guiding system.
Excellent air throw – Air-guiding system can double
fan air throw with comparable
volumetric flow
– More even cold storage cold air
distribution
Simple installation – Uncomplicated retrofitting
of air-guiding system
Convenient cleaning– Easy to detach for cleaning
Air-guiding system
www.ebmpapst.com.sg
ebm-papst SEA Pte. Ltd. Singapore (SEA Headquarters) 10 Changi South Street 2 #01-01/02Singapore 486596Phone: +65 6551 3789Fax: +65 6842 [email protected] [email protected]
ebm-papst SEA Pte. Ltd. Indonesia - JakartaRoseville SOHO & Suite,Tower SOHO 08th Floor No. 01,Sunburst CBD Lot I.8,Jl. Kapt. Soebianto Djojohadikusumo – BSD CityTangerang Selatan 15322, Indonesia Phone +62 21 5376250-52Fax +62 21 [email protected] [email protected]
ebm-papst (Thailand) Co., Ltd Thailand - Bangkok99/9 Moo 2, Central Chaengwattana Tower, 8th floor, Room 801-802 Chaengwattana RoadBangtarad, PrakkretNonthaburi 11120Phone +66 2 8353785-7Fax +66 2 [email protected] [email protected]
ebm-papst SEA Pte. Ltd.Vietnam - Ho Chi MinhUnit 512B, 5th Floor, Block BCharmington La Pointe 181 Cao Thang Street, Ward 12, District 10Ho Chi Minh City, VietnamPhone +84 28 3929 0699 / 0670 Fax +84 28 3929 [email protected] [email protected]
ebm-papst SEA Pte. Ltd. Malaysia - Kuala LumpurNo.16-1, Jalan Putra Mahkota 7/5A Putra Heights, 47650 Subang Jaya Selangor Darul Ehsan, Malaysia Phone +603 5192 7688 / 9688 Fax +603 5614 3078 [email protected] [email protected]
ebm-papst SEA Pte. Ltd.Malaysia - PenangBlock 31-8-03, Lebuh Nipah 5, Bukit Jambul, 11900 Bayan Lepas, Pulau Pinang, MalaysiaPhone +604 640 1380 / 1388 Fax +604 640 1389 [email protected] [email protected]
ebm-papst SEA Pte. Ltd. Philippines - ManilaCoherco Financial Tower Trade Street Corner Investment Drive Unit 1101Madrigal Business Park Ayala Alabang, Muntilupa City Philippines Phone +63 2 8804 2747 / 2757 [email protected] [email protected]
