Architectural Connectivity

➤ ADA compliant for slope and rise

➤ Modular enclosure supports power, data, and AV connectivity

➤ Select from hundreds of available Extron AAPs for fully-customizable AV connectivity

➤ AC power modules available

➤ Choice of carpet channel or rubber inlay strip

➤ UL/c-UL Listed

AVTrac®

LOW PROFILE FLOOR-MOUNT RACEWAY SYSTEM FOR POWER, DATA, AND AV

CONNECTIVITY

The elegant alternative to trenching and floor coring

A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M

7.50 "(19.05 cm)

7.50 "(19.05 cm)

3.63 "(9.21 cm)

4.27 "(10.84 cm)

3.70 "(9.40 cm)

.67"(1.70 cm)

END VIEW - ACTUAL SIZE

Introduction

The Extron AVTrac raceway system includes the AAP enclosure, aluminum

raceway, top cap, and side ramps. Optional accessories are available to

customize the system to your installation needs for a professional finish that

is sure to please the most demanding clients.

The modular AAP Enclosure supports all of the hundreds of available Extron

Architectural Adapter Plates for a fully customizable connectivity solution. Popular

AAPs include USB, HDMI, DisplayPort, VGA and audio pass-through plates; voice,

data, and control pass-through plates; and powered products such as Extron USB

HUB4 AAP and MTP Series twisted pair transmitters. The enclosure provides two

double-space and two triple-space AAP openings, sufficient for mounting up to

10 single-space AAPs. Blank plates are also available to cover any unused AAP

openings. Two AVTrac AAP Enclosures can be mounted side-by-side on separate

raceways utilizing the optional AVTrac Extra Channel Kit.

The proliferation of technology in the workplace has increased the demand for

power, data, and AV signal connectivity. Architects, interior designers, and AV

system integrators are often forced to compromise both aesthetics

and system designs in order to accommodate preexisting

network drops and power outlets. Alternatives, such

as poke-through devices and floor boxes,

can be too conspicuous, costly, or even

prohibited by building owners.

With the Extron AVTrac, architects

and designers are no longer limited

by the placement of wall-mounted

power, data, and AV connectivity.

AVTrac is a low profile, floor-mounted

raceway system with a flexible, modular

AAP - Architectural Adapter Plate enclosure

for power, data, and AV connectivity. AVTrac

offers a discreet, cost-effective alternative to floor coring

for poke-through devices, trenching for floor boxes, and raised access flooring

systems. It allows power, data, and AV signal connection points to be located

wherever they’re needed, with minimal impact on room design or aesthetics.

AVTrac is ideal for use in classrooms, training centers and other reconfigurable

spaces, and corporate boardrooms, as well as for adding new AV connectivity to

legacy installations and architecturally sensitive environments.

The patented, low profile AVTrac raceway system meets accessibility standards

for slope and rise as specified by the ADA - Americans with Disabilities Act. Two

4-foot (1.2 m) tracks combine to create an 8-foot (2.4 m) raceway that can

be installed underneath new or existing commercial grade carpet. AVTrac is

available in two versions. The AVTrac 482C accommodates matching carpet in

the aluminum raceway top cap for use in new installations or installations where

new carpet is being installed. The AVTrac 482R includes a black rubber strip

for installation in the raceway cap and is ideal for retrofit applications. For best

results, installation by a professional carpet installer is recommended.

A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M

7.50 "(19.05 cm)

7.50 "(19.05 cm)

3.63 "(9.21 cm)

4.27 "(10.84 cm)

3.70 "(9.40 cm)

.67"(1.70 cm)

END VIEW - ACTUAL SIZE

Features

Cost-Effective Alternative to Floor Coring and TrenchingAVTrac is a cost-effective alternative to poke-

through devices, floor boxes, and raised-access

flooring systems. AVTrac provides the flexibility

to place AV signal connections where they are

needed. The raceway system is ideal for use

in new and retrofit applications as well as in

architecturally sensitive environments.

Fast, Efficient InstallationAVTrac can be installed and fully operational in

a matter of hours, keeping labor costs and down

time to an absolute minimum.

ADA CompliantAVTrac complies with ADA – Americans with

Disabilities Act standards for slope and rise, and

is ideal for use in schools, corporate, government,

and retail applications.

Easy Access Cover PanelThe AVTrac enclosure features a removable top

panel for quick and convenient cable termination

and connector installation.

Modular AAP EnclosureAVTrac’s modular AAP Enclosure features

openings for two double-space and two triple-

space AAPs for a fully customizable connectivity

solution. Two AVTrac AAP Enclosures can be

mounted side-by-side in separate raceways

utilizing the optional AVTrac Extra Channel Kit.

The enclosure can accommodate any of the

hundreds of available Extron AAPs with popular

audio, video, phone, and data connectors, as

well as one AVTrac AC Power Module. Additional

accessories are available for customization.

UL/c-UL ListedAVTrac has been tested by Underwriters

Laboratories, Inc. to nationally recognized safety

standards. It is also approved for use in New

York City by the NYC Dept. of Buildings: Electrical

Division.

Inlay Cap OptionsAVTrac is available in two versions to fit the

installation requirements of most environments.

The AVTrac 482C features an open channel

for customer-selected, unpadded commercial

grade carpet between 1/4 inch and 5/16 inch

(7 mm to 9 mm) thick to match the surrounding

decor. The AVTrac 482C is ideal for use in new

installations, and those in which new carpet

is being installed. The optional AVTrac Rubber

Inlay Kit includes a black rubber inlay that

mounts directly in the AVTrac 482C carpet

inlay channel.

A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M

7.50 "(19.05 cm)

7.50 "(19.05 cm)

3.63 "(9.21 cm)

4.27 "(10.84 cm)

3.70 "(9.40 cm)

.67"(1.70 cm)

END VIEW - ACTUAL SIZE

Accessories

AVTrac 482C with matching carpet installed

AVTrac 482R with rubber inlay installed

AVTrac Extra Channel Kit shown with two enclosures mounted side-by-side

The AVTrac 482R includes a black rubber

inlay strip for installation in the top cap of the

raceway. It is ideal for retrofit applications

where additional matching carpet is not readily

available.

AVTrac Cable Pass-Through KitThe AVTrac Cable Pass-Through Kit mounts at the

end of an AVTrac Extension Kit and is designed

for applications where cables need to be passed

from the wall to a hollow table leg, desk, or a

fixed lectern location. The Cable Pass-Through

Kit can also be used at either end of an AVTrac

Extension Kit to allow the seamless transition

of cables from one table leg to the other. The

Cable Pass-Through Kit minimizes the number

of termination points and corresponding signal

loss by allowing continuous cable runs between

primary connection points within the system.

Optional Extension KitThe matching AVTrac Extension Kit includes an

additional 4 feet (1.2 m) or 8 feet (2.4 m) of cable

raceway and side ramps. It can be easily cut to

length as needed and allows power, data, and

AV connectors to be placed from 8 feet (2.4 m)

to 16 feet (4.8 m) from a wall or other area The

AVTrac Extension Kit can be used in combination

with the Rubber Inlay Kit.

Extra Channel KitThe AVTrac Extra Channel Kit allows the

AVTrac system to run two or more cable raceway

channels side by side between one set of side

ramps. The Extra Channel Kit provides additional

raceway capacity for AV cable routing. It is

packaged in two 4-foot (1.2 m) sections for a

total length of 8 feet (2.4 m).

Transition AdaptersThe Raceway Transition Adapter is designed

to work with wall-mounted cable management

systems, including Wiremold 4000 Series™

steel raceways. The AVTrac Raceway Transition

Adapters are available in matching Wiremold

Ivory ScuffCoat™ finish.

The AVTrac Retrofit Transition Adapter is

designed to provide a smooth transition from

the AVTrac floor-mounted raceway to a wall-

mounted patch panel. It facilitates cable pass-

through from wall-mounted AC outlets and

AV connection plates to the raceway system.

In addition, it provides an alternative solution

when base studs cannot be cut due to stringent

building codes.

A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M

The Rough-in Adapter is a raceway-to-base stud cable pass-through that provides a clean transition for routing

electrical conduit and AV cables from inside a finished wall into the AVTrac raceway.

The AAP Enclosure is designed for use with the AVTrac Floor-Mount Raceway System and Extra Channel Kit. The

enclosure includes two double-space and two triple-space AAP – Architectural Adapter Plate openings.

The Cable Pass-Through Kit mounts at the end of an AVTrac Extension Kit and is designed for applications where

cables need to be passed from the wall to a hollow table leg, desk, or a fixed lectern location.

AVTrac Accessories

The Extension is an optional 4' (1.2 m) or 8' (2.4 m) raceway track extension kit for use with the AVTrac Floor-Mount Raceway System.

The Extra Channel Kit allows two or more cable raceway channels to run side by side between one set of AVTrac side ramps.

The Raceway Transition Adapter is designed to work with wall-mounted cable management systems, including Wiremold 4000 Series™ steel raceways.

The Rubber Inlay Kit provides a durable, 0.22" (5.6 mm) rubber strip for an aesthetic alternative to matching carpet.

The AVTrac Retro Trans Adapter is designed to provide a smooth transition from the AVTrac floor-mounted raceway to a

wall-mounted patch panel. It facilitates cable pass-through from wall-mounted AC outlets and A/V connection plates to the raceway system.

Model Version Description Part #AVTrac INST TRANS 100WM Wiremold; Ivory 70-783-01

Model Version Description Part #AVTrac INST WTP Wall Trim Plate for AVTrac 70-782-01

Model Version Description Part #AVTrac 4C EXT Extension Kit, 4' (1.2m) – Carpet 70-645-04AVTrac 8C EXT Extension Kit, 8' (2.4m) – Carpet 70-645-08

Model Version Description Part #AVTrac INST EXCL Extra Channel Kit for AVTrac 70-671-01

Model Version Description Part #AVTrac 8R Inlay Kit Rubber Inlay Kit for AVTrac 70-670-01

Model Version Description Part #AVTrac AAP ENCL Holds up to 10 AAPs 70-801-02

Model Version Description Part #AVTrac Retro Trans Adapter for AVTrac 70-679-22

Model Version Description Part #AVTrac INST RIA Rough-in Adapter for AVTrac 70-781-01

The Wall Trim Plate compensates for minor over-cutting of gypsum wallboards during the installation of an AVTrac raceway system.

MLS 406MA

MediaLink Switcher

CONTROL

PEAK

CLIP

SIGNAL

INPUT SELECT

1

2

3

4

5

6

Extron AVTrac Floor Mount Raceway System

Extron Cable Pass-Through KitTable Leg Kit for AVTrac

Extron RacewayTransitionAdapter

LAN

Projector

Speakers

ExtronMLC 226 IPMediaLink Controllerwith IP Link

Wall Mount Cable Raceway

SpeakersProjectorCables run directly from wall to table leg, to furniture connections.

Holes drilled in table leg.

Hollow Table Leg

ExtronCable Cubby 200Cable Access Enclosure

APPLICATION DIAGRAMS

Model Version Description Part #AVTrac INST CPT Cable Pass-Through Kit 70-714-02

Extron USA - West Headquarters

+800.633.9876Inside USA / Canada Only

+1.714.491.1500+1.714.491.1517 FAX

Extron USA - East

+800.633.9876Inside USA / Canada Only

+1.919.863.1794+1.919.863.1797 FAX

Extron Europe

+800.3987.6673Inside Europe Only

+31.33.453.4040+31.33.453.4050 FAX

Extron Asia

+800.7339.8766Inside Asia Only

+65.6383.4400+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655+81.3.3511.7656 FAX

Extron China

+400.883.1568Inside China Only

+86.21.3760.1568+86.21.3760.1566 FAX

Extron Dubai

+971.4.2991800+971.4.2991880 FAX

www.extron.com © 2011 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.

04-201168-1420-01REV. F

specifications A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M

Specifications

GENERALPower US models 125 VAC, 50/60 Hz, 20 A (max.) International models 240 VAC, 50/60 Hz, 10 A (max.)Enclosure type Metal track base and top, metal connectivity box and

cover, plastic rampsTrack system End ramps 0.67" (1.7 cm) H x 9.36" (23.8 cm) radius, approximately

4.5° slope Side ramps 0.67" (1.7 cm) H x 7.50" (19.0 cm) W on either side of

track x 96.0" (243.8 cm) L, approximately 4.5° slope AVTrac 482C track base and top 1.03" H x 3.70" W x 96.0" L

(2.6 cm H x 9.4 cm W x 243.8 cm L) AVTrac 482R track base and top 0.95" H x 3.70" W x 96.0" L

(2.4 cm H x 9.4 cm W x 243.8 cm L) Connectivity box 3.55" H x 10" W x 4.91" D

(9.0 cm H x 25.4 cm W x 12.5 cm D) Product weight Parts in package 1 of 2 16.9 lbs (7.7 kg) Parts in package 2 of 2 10.6 lbs (4.8 kg)Shipping weight Package 1 of 2 22 lbs (10 kg) Package 2 of 2 13 lbs (6 kg)Vibration ISTA 1A in carton (International Safe Transit Association)Regulatory complianceSafety CE (international models), CUL, UL (US models)Accessibility Title III, Regulation 28 CFR Part 36: ADA Standards for

Accessible Design; Section 4.8: RampsWarranty 3 years parts and labor

Architectural Connectivity SolutionsExtron offers a full selection of complementary Architectural Connectivity

accessories for a complete architectural solution to enhance AVTrac Floor-

Mount Raceway Systems. With our easy to use and interactive online

Connectivity Configurator, you can design the AVTrac system to fit your

client’s exact needs.

Extron has hundreds of AAP – Architectural Adapter Plates, making it

easy to fully customize the unit to meet the connectivity needs of each

installation. Popular AAPs include USB, DisplayPort, DVI, and HDMI; VGA and

audio pass-through plates; and voice, data, and control pass-through plates.

The Extron Connectivity Configurator is an interactive, drag-and-

drop, online tool for designing and customizing architectural connector

installations. This tool presents an up to the minute list of every Extron

AAP – Architectural Adapter Plate currently available. Users can easily sort

through the hundreds of connector options and simply drag and drop their

selections into place. The resulting configuration can be printed for inclusion

in customer presentations and documentation.

Model Version Description Part #

Carpet Inlay Channel

AVTrac 482C Carpet Inlay, No AC power 42-155-00

AVTrac 482C Carpet Inlay, w/AC US, Prewired Conduit 42-155-24A

Rubber Strip Channel

AVTrac 482R Rubber Inlay, No AC power 42-156-00

AVTrac 482R Rubber Strip, w/AC US, Prewired Conduit 42-156-24A

AVTrac Extension Kit

AVTrac 4C EXT Extension, 4’ (1.2m) - Carpet 70-645-04

AVTrac 8C EXT Extension, 8’ (2.4 m) - Carpet 70-645-08

AVTrac Installation Accessories

AVTrac 8R Inlay Kit Rubber Strip Inlay Kit for AVTrac 70-670-01

AVTrac INST EXCL Extra Channel Kit for AVTrac System 70-671-01

AVTrac INST RIA Rough-in Adapter for AVTrac 70-781-01

AVTrac INST CPT Cable Pass-Through Kit 70-714-02

AVTrac INST WTP Finished-Wall Trim Plate for AVTrac 70-782-01

AVTrac RETRO TRANS Retrofit Transition Adapter for AVTrac 70-679-22

AVTrac INST Trans 100WM Wiremold; Ivory 70-783-01

AVTrac AAP Enclosure

AVTrac AAP Enclosure For AVTrac Extra Channel Kit 70-801-02

AVTrac AC Power Modules

AVTrac 2AC US Two US Outlets, Prewired Conduit 70-799-08

AVTrac 4AC US Four US Outlets, Prewired Conduit 70-799-09

AVTrac 1AC AUS Australia Outlet, Conduit Only 70-799-05