Aviation-, Marine Fuel- & Tank Filter Systems Blending Go4 ... Semi-automatic Flexblender -...
2
Semi-Automatic Blending System Fitted in CSC Approved 10´ Sea Containers Semi-Automac Blending The Flexblender™ is the most sophiscated system for all your blending requirements. The Flexblender is custom fied into a 10´ CSC approved container. This provides a very flexible unit which can be easily installed at an oil terminal or on board a barge with products flash above 60 o C. Furthermore it can easily be moved around as and where it is needed. The Flexblender is connected to the main pipe system by 6” flanges and behind each inlet and outlet flange there is a ball valve to shut off the externally connected pipes. The outstanding facilies for high quality control is achieved by using a Go4 Mechani- cal Fuel Blender in combinaon with our Bunker Monitor to further fine tune this unique system for semi-automac blending. The Flexblender’s control system connu- ously receive informaon from the CBI Bun- ker Monitor and use advanced proprietary control algorithms to display the necessary adjustments on the blender wheel for the amount of feed stock to be added, to meet the specificaon of the blended product. The Flexblender is fied in a CSC approved container that provides a sheltered space for operaon. And for use in extreme condi- ons it is equipped with light fixtures and a heang element to avoid moisture and con- densaon. Lloyds/B&V/DNV/RMR - Classificaon can be obtained if required. TURNKEY SOLUTIONS There are many variables to take into account when fitting a blending system and our highly skilled engineers will adapt our system to fit your exact requirements. TECHNICAL SUPPORT We are with you all the way. Before, during and after the implementation to secure a flawless integration and operation. ZERO DOWNTIME As a central part of a bunker delivery system; mechani- cal stability, toughness and durability is an important aspect of the manufacturing and design philosophy. For more information on these or other of our prod- ucts or services please visit us on the Web at: www.cbi.dk Blending Go4 Flexblender - Fuel Oil Blender for Bunker operation Aviation-, Marine Fuel- & Tank Filter Systems Using the customized control unit the Flexblender offers the following advantages • Semi automac Blend- ing (connuous readout of viscosity - handwheel adjustment) • Easy to operate • Easy to install • Fied into a 10´ CSC ap- proved container • Integrated dripsampling • Blending to exact specifi- caon ISO8217:2012 • Automac batch reporng • Reduced “Give-away to avoid claims”
Transcript of Aviation-, Marine Fuel- & Tank Filter Systems Blending Go4 ... Semi-automatic Flexblender -...
Semi-Automatic Blending SystemFitted in CSC Approved 10´ Sea Containers
Semi-Automatic BlendingThe Flexblender™ is the most sophisticated system for all your blending requirements.
The Flexblender is custom fitted into a 10´ CSC approved container. This provides a very flexible unit which can be easily installed at an oil terminal or on board a barge with products flash above 60oC. Furthermore it can easily be moved around as and where it is needed.
The Flexblender is connected to the main pipe system by 6” flanges and behind each inlet and outlet flange there is a ball valve to shut off the externally connected pipes.
The outstanding facilities for high quality control is achieved by using a Go4 Mechani-cal Fuel Blender in combination with our Bunker Monitor to further fine tune this unique system for semi-automatic blending.
The Flexblender’s control system continu-
ously receive information from the CBI Bun-ker Monitor and use advanced proprietary control algorithms to display the necessary adjustments on the blender wheel for the amount of feed stock to be added, to meet the specification of the blended product.
The Flexblender is fitted in a CSC approved container that provides a sheltered space for operation. And for use in extreme condi-tions it is equipped with light fixtures and a heating element to avoid moisture and con-densation.
Lloyds/B&V/DNV/RMR - Classification can be obtained if required.
TURNKEY SOLUTIONS
There are many variables to take into account when fitting a blending system and our highly skilled engineers will adapt our system to fit your exact requirements.
TECHNICAL SUPPORT
We are with you all the way. Before, during and after the implementation to secure a flawless integration and operation.
ZERO DOWNTIME
As a central part of a bunker delivery system; mechani-cal stability, toughness and durability is an important aspect of the manufacturing and design philosophy.
For more information on these or other of our prod-ucts or services please visit us on the Web at:
www.cbi.dk
Blending Go4 Flexblender - Fuel Oil Blender for Bunker operation
Aviation-, Marine Fuel- & Tank Filter Systems
Using the customized control unit the Flexblender offers the following advantages
• Semi automatic Blend-ing (continuous readout of viscosity - handwheel adjustment)
• Easy to operate• Easy to install• Fitted into a 10´ CSC ap-
proved container• Integrated dripsampling• Blending to exact specifi-
cation ISO8217:2012• Automatic batch reporting• Reduced “Give-away to
avoid claims”
Technical SpecificationsGo4 Flexblender
SERVICES AVAILABLE
Consulting ServicesTechnical SupportInstallation and SetupMaintenanceWarranty
Go4 Bunker ApSLille Blodevej 3
DK-3600 FrederikssundDenmark
+45 4731 3388www.cbi.dk
Blending Go4 Flexblender - Fuel Oil Blender for Bunker operation
Aviation-, Marine Fuel- & Tank Filter Systems
Flex Blender Blending range 0% - 100% Accuracy <1,0% full range
Maximum capacity 6” 300 m3/h @ 10 cSt
Bunker Monitor Viscosity measuring range 0 – 1,000 cSt
Pressure Min/Max inlet pressure 3 / 10 bars
Weight Dry weight Approx. 7,000 - 7,600 kg Volume in pipes and com-ponents approx. 250 litres
Dimensions Outside of container 2991 x 2438 x 2591 mm L x W x H
Maximum Flowrate Bunker Fuel 400 cSt - ACTUAL Diesel and Cutter Stock 10-50 cSt ACTUAL
Max. Permanentflow rate
Max. Temporaryflow rate
Max. Permanentflow rate
Max. Temporaryflow rate
LBM1000 8” Meter 3,100 l/min 3,500 l/min 7,000 l/min 7,800 l/min
600
AA
C
CA-ABall valve
Ball valve
Bunker monitor
Ball valve
Drip sampler
C-C
Coontrolpanel
Blender
550 761
525
2xDIN2690-DN150 PN-10 flange
770
378
DIN2690-DN150 PN-10 flange
D
F
C
3
B
A
32
1
5
C
D
4 6 7 8
A
B
4
Material
Lille Bloedevej 3DK-3600 Frederikssund
Denmarkwww.cbi.dk
04-11-2013Material <not specified>
Layout
102179-001WEIGHT: 9360.29
102179 A3
SHEET 1 OF 1SCALE:1:40
DWG NO.
TITLE:
Project:
DATE
DEBUR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES:LINEAR/ANGULAR: DS/ISO 2768-1 (m)SHAPE/POSITION: DS/ISO 2768-2 (k)
DRAWN BY:
PROJECTION:JLH
EE
1
2
