AUTOPIA - ASM SMT Solutions
Transcript of AUTOPIA - ASM SMT Solutions
AUTOPIA
Maximum FOV-at-test up to 210⁰Possible for stereo camera alignment11 Degree of Freedom to enhance alignment qualityHighly configurable se�ngs • Easy switch between maximal yield or maximal UPH produc�on sequence • Extensive user-define process parameters availableAlignment result is greatly improved by sensor leveling Automa�c precision loading/ unloading forhigh volume produc�onCompe��ve cost of ownershipScalable for inline produc�onClass 100 cleanliness
Value Proposi�ons
ASM Pacific Technology www.asmpacific.com
An Innova�on for Camera Precision Alignment and Tes�ng
ASM
Ac�
ve A
lignm
ent
Specially designed and manufactured with the highest quality for precision alignment assembly and testing of wideField of View camera module, catered for Automotive, Surveillance, Sports and Drones applications
An Innovation for Camera Precision Alignment and Testing
AUTOPIA
www.asmpacific.com
ASM Pacific Technology
ASMPTWorldwide
The informa�on in this documenta�on consists only of general descrip�ons and / or performance features, which is not contractually binding. Subject to changes without no�ce.*ASM reserves the right to modify/change the specifica�ons.
rev 3.0
Active Alignment
Final Tester
Final Tester
Test Charts
Test Charts210˚ with
side collimators Included Included
Active Alignment Collimators
Collimators
Up to 210˚
210˚ withside collimators
Up to 210˚
Included Included
Included
IncludedN.A
N.A
Product Series
AUTOPIA Series Type Target Projec�on FOV Capability AA Module Image Tes�ng
Unique Product Features
Specifica�ons
Facili�esDimension (with MTS): 2630mm(L) x 2200mm (W) x 2300mm (H)Weight (with MTS): ~2900kgPower (MTS); 380-415VAC, 3 PhaseFrequency: 50/60Hz (Preset at factory)Compressed air pressure: 5-6 Bar
PerformanceCycle �me: 15s*FOV: depending on CM or CT versionCuring System: 4x 365nm LED, >2000mWDegree of Freedom: SUT 5 DOF + AA 6 DOF
Material HandlingMTS loading: JEDEC 322.6 x 135.9mm²Lens Holder type: FF/AF/OIS moduleLens Holder size: up to 25 x 25 x 45mm²Substrate type: FR4 PCB or flex PCB with connector socketSubstrate size: Up to 60 x 60 x 2mm²
Test chart with 4 Motorized side collimators - Facilitates conversion between packages
11 Degree of Freedom - Feasible for either Lens or Sensor �l�ng alignment
Dual Unit Transporter - Capability to adopt different module within setup
High volume handling via magazines and trays Robo�c arm for precision pick and place
Sensor
Test Chart
Side Collimator
LensUT - A UT - B