Automazioni Eng

rolling shutters | awnings | rolling doors | industrial doors and gatesA U T O M A T I O N S Y S T E M S

TELECO AUTOMATION NETWORK DOMOTICS SOLUTIONS FOR HOMES, OFFICES, COMPANIES, HOTELS …

Comfort, safety and security, enhanced rationalization

of energy costs; the new Teleco Automation domotics

technologies offer reliable, effective, complementary and

synergistic solutions.

A large network of innovative solutions for controlling,

managing, programming automated home systems is now

available to the discerning users. Our devices combine state-

of-the-art technology and remarkable functional performance

with refined design, to distinguish both interior and exterior

architecture.

At Teleco Automation we are inspired by the wish to offer

convenience, user-friendliness, function rationalization,

and the joy of “experiencing” more homely architectural

structures. We specialize in offering state-of-the-art

automation solutions, be they specific, custom-made or

integrated in a wider network to brilliantly address even very

complex needs.

Comfort, safety and security, energy savingsIN THE NEW “TELECO LIFESTYLE”

AUTOMATIONSYSTEMS

LIGHTS AND LOADS CONTROL SYSTEMS

HOME INTEGRATION

2

FLUORES

CENT

LIGHTS

OUTDOOR

LOADS

EASY KIT

VENTIL

ATIO

N

LEDS

HALOGEN

AND

RESISTIV

E LIG

HTS

OUTDOOR

Garden lights, irrigation, fountains,

swimming pools

SECURITY

INDOOR

Living room, kitchen,

bathroom, bedroom

ROLLIN

G SHUTTER

S

MY HAND

AWNIN

GS

ROLLIN

G DOORS

INDUSTR

IAL DOORS

AND GATES

INDUSTR

IAL DOORS

SAFETY

AND SECURITY

TAK

The chartshows the topics in this catalogue in a darker shade; topics in the other two Teleco Automation catalogues are in a lighter shade.

3

4

Are you looking for a solution that allows to coordinate and control

automations, lights, climatization, safety and security of your home in a

single system simply through your smart-phone?

The solution is MY-HAND, the new Teleco Automation interface which

allows connection through a Wi-Fi router with any terminal (pc,

notebook, tablet, smart-phone) using remote access via internet or

ethernet. MY-HAND uses a special, easy-to-use graphical interface which

can be customised with pictures of your home and familiar control

devices.

My-HAND enables you to use your smart-phone like a normal

transmitter!

HOW TO USEMY-HAND system is simple, quick and safe to use; with few operations the user is immediately able to control his home within a single system.Basic operations for using the MY-HAND control system:

1 Connect MY-HAND to a Wi-Fi router2 Connect MY-HAND to the power mains 3 Connect the terminal (PC, notebook, tablet, smart-phone) to the home Wi-

Fi network 4 Open your favourite browser (Explorer, Safari etc.)5 Enter the IP address supplied with your MY-HAND6 Set the graphical interface which allows to create and customise control

pages in a simple and user-friendly way7 Program the MY-HAND like a normal Teleco Automation transmitter by

following the instructions of the associated receiver.

MY-HAND control system operation diagramThis plug&play system works without the need for any specific application, and it is PC, notebook, tablet and smart-phone compatible.

After memorizing and customising the transmitter, thanks to MY-HAND you will be able to control the whole house and even send group commands for opening, closing and light scenes.

LOCAL NETWORK

ROUTERINTERNET - ETHERNET MY-HAND

MY-HAND, the whole house under controlWITH ONE SINGLE INSTRUMENT

Wi-Fi

5

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

• Plug & PlayMy-Hand does not require any complicated installation procedure; the system is implemented through simple and intuitive connections.

• yOuR WHOlE HOuSE IS uNDER CONTROl WITH a SINglE DEVICEYour whole house is under control at any time for round-the-clock peace of mind. MY-HAND allows to control all domestic automated functions through one single device; your home will thus become a consistent and systematic whole.

• SIMPlICITy OF uSE aND CuSTOMISaTIONOn the first selection page there are 6 pictures that can be customized with the control devices you are familiar to and with pictures of your home. This solution allows you to have a customized tool of easy and immediate reference. You can send commands to your home automation systems at any time and with any communication device connected to your home’s Wi-Fi network by accessing the dedicated pages.

• COMFORT WITHIN REaCH OF allNo software or application is needed with MY-HAND; all you need to use is a Wi-Fi router and Internet connection.

• CONTROl THROugH aNy TERMINalPC, smart-phone, tablet, notebook: any Internet-enabled device can be used to interface with MY-HAND.

My-HaND gREaT aDVaNTagES aND BENEFITS

aN INTEgRaTED aND INNOVaTIVE SOluTIONMY-HAND allows to control all your home’s automated systems, from rolling shutters to awnings, from entry doors to gates through your favourite device, which interfaces with Teleco Automation systems for these applications (control units, safety devices, sensors etc.).MY-HAND interfaces with the different solutions offered by Teleco Automation for controlling all types of lights and LEDs. It is possible to turn on and off, adjust brightness and activate colour LED light ambiances directly from your favourite device.

AUTOMATION SYSTEMS FOR Rolling shutters, Awnings, Rolling doors, Industrial doors and GatesHOME, OFFICE, COMPANY, HOTEL …EVERYTHING UNDER CONTROL. WITH INTELLIGENCE. Teleco Automation technology supplies coordinated automation systems easy to install and to use, offering great functional performance, with no need for any sophisticated and consequently complex domotics installations. Particular attention is dedicated to each component’s technical performance, which must above all translate into system reliability as well as assuring comfort, safety and security to the whole home, office or company. Teleco Automation devices combine advanced technology and design to give a strong personality to each room. Teleco Automation systems allow the various users to interact with the home or workplace in a new way. Command and control operations become simple, functional and effective also from the point of view of safety, security and comfort in general.

Table of contentsROLLING SHUTTERS AUTOMATION .................................................. page 8• T-ONE, tubular motor with built-in radio control unit

AWNINGS AUTOMATION .................................................................... page 12• T-ONE, tubular motor with built-in radio control unit

ROLLING DOORS AUTOMATION ........................................................ page 16• My Door control unit• PRW control unit

INDUSTRIAL DOORS AND GATES AUTOMATION .............................. page 22• GSM Control Unit

INDUSTRIAL DOORS SAFETY ............................................................. page 26• Master and Slave Transceiver

TAK, A RANGE OF PROGRAMMABLE TRANSMITTERS AND RECEIVERS FOR ACCESS CONTROL VIA PC ............................ page 30

ACCESSORIES FOR AUTOMATION SYSTEMS ................................................ page 32• Electrical motors for rolling shutters / awnings ................................................ page 34• Portable transmitters ........................................................................................ page 36• Table / wall transmitters .................................................................................... page 38• Timer / keypad transmitters ............................................................................... page 40• Mechanical switches ......................................................................................... page 41• Control units for rolling shutters motors .......................................................... page 42• Control units for awnings motors ..................................................................... page 45• Weather and alarm sensors for rolling shutters ................................................ page 46• Weather sensors for awnings ............................................................................ page 47• Control units for rolling door motors ................................................................ page 48• Safety devices for rolling doors ........................................................................ page 50• Safety devices for industrial doors .................................................................... page 52• GSM control units ............................................................................................ page 54• Receivers for industrial doors and gates ........................................................... page 55•TAK - PC-programmable transmitters for gates and doors ................................ page 56• 433 MHz transmitters ........................................................................................ page 58• 433MHz receivers.............................................................................................. page 60• Electric locks .................................................................................................... page 62

7

8

WIRELESS CONTROL Commands are transmitted via radio. There are no electric cables connecting motor and control, which is mobile so that rolling shutters can be controlled remotely, individually or in groups. Installation is quick and does not require any brickwork.

MORE COMFORT, MORE SAFETY AND SECURITY, MORE ENERGY SAVINGS

Automating new or existing rolling shutters with Teleco Automation systems is easy, quick and affordable; all you need is inserting a tubular motor inside the roller cylinder.Commands are sent in the immediate vicinity by means of a simple wireless wall or portable transmitter.This wireless solution does not call for wall channels or other cable concealment systems. The automation system is complemented by a set of sensors to assure the utmost safety, security and home comfort.

HOW TO AUTOMATISE

WEATHER SENSORS Sensors are fastened directly to the window pane to detect weather conditions and immediately transmit them to the control unit. If for instance the sunlight is too hot, the sensor sends a signal which automatically lowers the shutter, even if you’re not there.

TIMED CONTROL It is possible to set operation preferences with the CLOCK wireless transmitter, assigning each rolling shutter customised automation timing and modes. Casual presence simulation can also be set.

All automated systems can be integrated with the “TELECO HOME INTEGRATION SYSTEM”

With Teleco Automation systems rolling shutters are controlled

automatically with a simple gesture; one click and all the home’s

shutters roll up or down for maximum comfort. Automated rolling

shutters assure better window insulation. Automatic adjustment to

external light and temperature variations reduces air conditioning

and heating costs, as well as offering improved home and personal

safety and security thanks to specific functions such as presence

simulation, alarm, motion stop in case of obstacle.

Rolling shutters automation

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

9

SAFETY: ALARM KIT In the event of a break-in attempt the device – consisting of a wireless sensor to be applied to the shutter and a radio socket – sends a signal to the house alarm system.

MOTOR AND SAFETY Obstacle detection protects the rolling shutter and any other item inadvertently left on the window sill. The built-in motor control unit immediately detects the obstacle and stops the shutter to allow safe removal and command repetition without any damage.

10

Rolling shutters automation - T-ONE

Wireless limit switch adjustment from transmitter

Semi-automatic limit switch adjustment (1 automatic spot, 1 spot with transmitter)

Automatic limit switch adjustment ideal for rolling shutters with blocks

Automatic rolling-up or down stop function in presence of an obstacle

Simple and intuitive intermediate point adjustment by means of radio transmitter

Wireless control of light, sun, rain and wind sensors

Top precision, reliability and long-term retention of settings

Simple and quick installation to assure time savings

T-ONE, TuBulaR MOTOR WITH BuIlT-IN RaDIO CONTROl uNIT

Reliable, precise, simple to install; T-one is a tubular motor with electronic limit switch and built-in radio,

designed for rolling shutter automation with a simple wireless input.

It perfectly integrates with a wide range of new or existing rolling shutters.

MOTOR ACCESSORIES ON DEMANDAdapters for tubular motors.

TECHNICAL FEATURES

DIMENSIONS Ø45Dimensions in mm

Model/Code Torque (Nm) Speed (RPM) Power supply (V/Hz) Absorption (A) Power (W) Timer (Min) Cable (m)

T-ONE / MTE45102 10 17 230/50 0,7 150 4 3

T-ONE / MTE45152 15 17 230/50 0,8 170 4 3

45

8.50

61

R7.848.50

22.4 22.4

663 (563-10/15 Nm)

619 (519-10/15 Nm)15

2

11

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

Portable wireless transmitter

Wall wireless transmitter

Electric motor withbuilt-in radio

INTERACTION DIAGRAM OF T-ONE MOTOR WITH COMPLEMENTARY DEVICES

CONTROl DEVICES

Light and alarm sensors► Complete range on page 46

All automated systems can be integrated with the“TELECO HOME INTEGRATION SYSTEM”

Alarm Kit► Complete range on page 46

Table and wall transmitters ► Complete range on page 38

Portable transmitters► Complete range on page 36

Timer transmitters ► Complete range on page 40

Wall transmitters ► Complete range on page 38

Light and alarm sensors

Alarm kit

Wireless control units for controlling tubular motors without built-in radio

► Complete range on page 42

12

SELF-ADJUSTING, AUTOMATIC AND INTELLIGENT AWNINGSTeleco awnings automation systems assure optimal comfort

and energy savings with simple through a one-click operation.

The weather sensors and automatic controls optimize thermal

efficiency of the house. Is it too sunny? The light sensor controls

awning lowering to protect the terrace and the interior from

light and heat. Is it very windy? The sensor controls automatic

awning rolling up for maximum safety and protection of both

awning and structure.


Awnings automation

Automating both new awnings or existing ones is easy, quick and affordable; all you need is inserting a tubu-

lar motor inside the awning cylinder. The signal can be sent in the immediate vicinity by means of a simple

wall or portable wireless transmitter. This solution does not require any brickwork to hide the unsightly elec-

tric cables. The automated system is complemented by a series of sensors to assure maximum safety and

home comfort.

HOW TO AUTOMATISE

WIRELESS CONTROL Commands are transmitted via radio; there are no electric cables connecting motor and control, which is mobile so that awnings can be controlled remotely. Installation is quick and does not require any brickwork.

WIRELESS VIBRATION SENSORS The sensors instantaneously detect weather conditions and send a signal to the control unit.For example, if the wind rises, a special vibration sensor triggers automatic awning rolling up, for maximum safety even if you are not at home.

13

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

TIMED CONTROL It is possible to set awning operation preferences with the CLOCK wireless transmitter, for customised timing and modes.

230V WIRELESS SENSORS Special wind, sun and rain sensors – connected to a wireless control unit – send an impulse to the motor control unit in order to open or close the awning according to the detected weather.

14

Awnings automation - T-ONE

Wireless limit switch adjustment from transmitter

Torque reduction upon closure

Automatic compensation of fabric lengthening

Simple and quick installation to guarantee time savings

Wireless controlled wind, sun and rain sensors

Top precision, reliability and long-term retention of settings

T-ONE, TuBulaR MOTOR WITH BuIlT-IN RaDIO CONTROl uNIT

Reliable, precise, simple to install, T-one is a tubular electric motor with electronic limit switch and built-in

radio. It is activated with a wireless control and it is equipped with a progressive power reduction system

during awning rolling up, to assure complete closure as well as protection against any warping.

MOTOR ACCESSORIES ON DEMANDAdapters for tubular motors.

TECHNICAL FEATURES

DIMENSIONS Ø45Dimensions in mm

45

8.50

61

R7.848.50

22.4 22.4

663 (563-32 Nm)

619 (519-32 Nm)15

2

Model/Code Torque (Nm) Speed (RPM) Power supply (V/Hz) Absorption (A) Power (W) Time (Min) Cable (m)

T-ONE / MTE45321 32 17 230/50 1,1 250 4 5

15

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

Electric motor withbuilt-in radio

Sensor

Portable transmitter

Walltransmitter

TImer transmitter

Table transmitter

INTERACTION DIAGRAM OF T-ONE MOTOR WITH COMPLEMENTARY DEVICES

CONTROl DEVICES


Wireless vibration sensor► Complete range on page 47

230V wireless sensors► Complete range on page 47

Table and wall transmitters► Complete range on page 38


Timer transmitters► Complete range on page 40


Wireless control unit for controlling tubular motors without built-in radio


16

UNSURPASSED EASY- USEAND SAFETY

An automated rolling door offers great convenience; all you

need to do is press a button on the transmitter and the door

will automatically roll up or down. Utmost safety is guaranteed

by an obstacle detection system within the operation range (in

compliance with EN 13241 norm) which immediately stops the

downwards movement and commands rewind. In the event of

a person, animal or object being within the operating range, the

safety system prevents any harm or damage. If forced break-

in is attempted, a special detection system will send an alarm

signal.


Automating and making more secure a rolling door with Teleco Automation is extremely easy; all it takes is

connecting the motor to a control unit which will interface with safety and control systems. The signal can be

sent by a suitable wall transmitter placed nearby, or by a portable transmitter. A wide range of accessories is

available to ensure the highest level of safety and comfort.

HOW TO AUTOMATISE

WIRELESS CONTROL Commands are transmitted via radio; there are no electric cables connecting motor and control device, which is mobile so the rolling entry door can be controlled remotely. Installation is quick and does not require any brickwork.

Rolling Doors automation

17

SAFETY DEVICES Sensitive photocell detectors, rubber profiles to cushion the impact and brakes provide the rolling entry door with a high degree of safety for people, animals or objects that should inadvertently be within the operating range, promptly stopping it.

SAFETY: ALARM KIT In the event of a break-in attempt the device – consisting of a wireless sensor to be applied to the rolling entry door and a radio socket – sends a signal to the house alarm system.

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

18

Semi-automatic movement and present man opening

12Vdc photocell output

Automatic detection of mechanical limit switch (automatic work time)

Infra-red wired safety edge input (functioning in opening and closing)

Traditional photocell input

Brake input

Separate ON/OFF function on the transmitter for courtesy light

Magnet input for safety exclusion in the last 5 cm before complete closure

Courtesy light or door alarm output

Button input for manual control

Optional remote control configuration with forced door alarm function

Optional wireless safety control thanks to the MY SAFE Kit

IP54 protection degree without light, IP20 with light.

MY-DOOR, CONTROL UNIT FOR ROLLING DOORS Control unit for wireless control of rolling doors in outdoor box for motors up to 400W. New-generation model which offers the option of either wired or wireless safety device connection thanks to the MY SAFE Kit.•Basicmodel:wiredsafetydevicecontrol.•WiththeMYSAFEKit(optional):wirelesscontrolof the safety edge.

MY SAFE Kit: it consists of a MASTER receiver to be connected to the control unit and of a SLAVE device to be placed on the door and to be connected to the safety edge photocell. Easy installation only calls for straightforward connections between motor, control unit and safety accessories.

MTRX2.4GA08KIT

MASTER SLAVE

TVPRP868a08l

TECHNICAL FEATURESModel/Code Power supply Motors up to Dimension (mm)

TVPRP868A08L 230Vac 400W 280 x 145 x 85

TECHNICAL DIAGRAM

Rolling Doors automation - MY-DOOR

19

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)


Portable transmitters


INTERACTION DIAGRAM OF MY DOOR CONTROL UNIT WITH COMPLEMENTARY DEVICES

CONTROl DEVICES

SaFETy DEVICES

Alarm kit


Control unit accessories


Brake and Doorled courtesy light► Complete range on page 50

Safety edge and infra-red transmitter ► Complete range on page 51

TCSP Transceiver


My Door control unit


Wall transmitter

Alarm kit

Keypad

Safety device and sensor



20

Semi-automatic movement and present man opening

Wireless controls

Brake input

Wired button input

Courtesy light output

Separate ON/OFF function on the transmitter for courtesy light

Suitable to be fitted to the door in the production line: • lower risk of errors upon door installation; • less requests for telephone assistance; • guaranteed door installation in compliance with EN13241 norm

Thanks to a range of accessories and devices, it immediately detects obstacles for maximum safety of persons and objects

Wireless safety edge control with TCSP240A04

PRW, CONTROl uNIT WITH RADIO SAFE Built-incontrolunitforrollingentrydoorsinside the rolling box for controlling tubular motors up to 400W.Version fitted with RADIO SAFE system for wireless safety edge control. This system is particularly easy to install as it is not necessary to lay cables linking the control unit to the safety edge. This control unit is suitable to be fitted to the door in the production line, ensuring considerable advantages for the installer.

TECHNICAL FEATURESModel/Code Power supply Motors up to Dimension (mm)

TVPRW868I04 230Vac 400W 165 x 65 x 25

Rolling Doors automation - PRW

TECHNICAL DIAGRAM

TCSP240a04

TVPRW868I04

21

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

INTERACTION DIAGRAM OF PRW CONTROL UNIT WITH COMPLEMENTARY DEVICES


Built-in control unit

Wall transmitter

Keypad

Safety device and sensor


CONTROl DEVICES

Alarm kit




SaFETy DEVICES

Alarm Kit


Brake and Doorled courtesy light ► Complete range on page 50

Safety edge and infra-red transmitter ► Complete range on page 51

TCSP Transceiver



22

READY AND MANAGEABLE IN TOTAL SAFETY


We offer the best solutions to automate industrial doors and

gates. Click on the portable transmitter and the door or gate

will open in few seconds and will close automatically after

passing through. You can enter and exit without even getting

out of the car! An automated door or gate opens and closes

with an effortless and fluid motion: it will live longer and

optimize your investment.

Automation systems for controlling gates and industrial doors include a receiver connected to the motor

control unit, photocells and safety devices. The automation system can also be complemented with a GSM

unit, thus making it possible to manage the door or gate not only with the transmitters but also via a GSM

phone call or text message.

HOW TO AUTOMATISE

WIRELESS CONTROL Commands are transmitted via radio; there are no electric cables connecting motor and control device, which is mobile so the industrial door or gate can be controlled remotely. Installation is quick and does not require any brickwork.

Industrial doors and Gates automation

23

GSM CONTROLOpening and closing commands can be transmitted either with a Text Message or a simple phone ring at zero costs. The GSM system allows to manage transmitters and phone numbers.

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

24

TECHNICAL FEATURESModel/Code Reception frequency Power supply GSM Operating

temperatureMaximum resistive load applicable to the relay

Dimension (mm)

TVGSM200 868.3 MHz 12Vdc Quad-band -20° +60°C 5A 137 x 96 x 46

Possibility to activate the exits with wireless transmitter, text message or free phone call

Possibility to store or delete a radio transmitter in the GSM receiver memory by sending a Text Message

Possibility to manage the functions via PC

Possibility to enable or disable a telephone number by sending a Text Message

Possibility to authorise exit for a telephone number for a limited number of times (from 1 to 999 times) by sending a Text Message

GSM CONTROL UNITGSM receiver for control units for industrial doors and gates with radio module. A command can be transmitted with a call or a text message sent to the phone number of the GSM module SIM CARD or via the normal wireless transmitter.Up to 300 telephone numbers and up to 100 wireless transmitters can be memorised in the control unit.

Industrial doors and Gates automation

12Vdc battery input

Power supply 12Vdc

Relay 1 outputRelay 2 output

Antenna

TVgSM200

TECHNICAL DIAGRAM

GSM Antenna

PC

25

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

Model/Code Reception frequency Power supply GSM Operating temperature

Maximum resistive load applicable to the relay

Dimension (mm)

TVGSM200 868.3 MHz 12Vdc Quad-band -20° +60°C 5A 137 x 96 x 46

INTERACTION DIAGRAM OF GSM CONTROL UNIT WITH CONTROL DEVICES

CONTROl DEVICES

Wall transmitters► Complete range on page 40

Receivers► Complete range on page 55



GSM 200 control unit

GSM 200 control unit

Keypad

Mobilephone


26

Safety systems for Industrial doors

SAFE AND RELIABLE SOLUTIONSSIMPLE TO INSTALL

Teleco Automation wireless devices ensure high reliability of

industrial doors, a particularly important feature given the

high degree of safety they have to provide.

These devices comply with the strict European EN13241

norms for safety devices. Innovative, 100% wireless solutions

offer maximum safety with the greatest ease of installation

and user-friendliness.

The safety of industrial doors during operation is assured by a series of dedicated wireless devices. The

Master transceiver connected to the motor controller receives a signal from the Slave device connected to the

safety edge photocell.

If the photocell detects an obstacle within the door range, a signal is immediately sent to the motor control

unit, which commands the industrial door to stop.

HOW IT WORKS


AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

28

Two complementary wireless elements for the safety

of industrial doors. The system consists of a MASTER

transceiver to be connected to the motor control unit and of

a SLAVE transceiver to be placed onto the entry door and

connected to the safety edge. Communication between

these two devices is wireless so that the spiral cable is

unnecessary. The SLAVE device – connected to the safety

edge photocell – transmits information to the MASTER,

allowing to make the entry door motion range safe. If an

obstacleisdetected(persons,animals,things),theSLAVE

device instantaneously sends a signal to the MASTER

connected to the control unit, which immediately blocks the

entry door. System only suitable for connections with control

units with autotest.

MaSTER RCSP240a04 (main features)

Transceiver to be connected to the motor control unit. It controls

separately two safety alarms, one for opening and one for closing. In

wireless mode it can control up to two SLAVE devices.

SlaVE TCSP24OCO4 (main features)

Transceiver to be placed onto the entry door and connected to the

safety edge. The device is powered by two batteries with a two-year

power reserve. It is also fitted with:• Input with low-consumption photocell power supply

• 8.2 Kohm input for safety edge

TransceiverMASTER

Transceiver SlaVE

RaDIO SaFE KIT: SaFER aND MORE RElIaBlE INDuSTRIal DOORS

Battery low alarm

Input control Autotest

Power supply

Alarm contact 1

Alarm contact 2

Safety systems for Industrial doors

TECHNICAL FEATURESModel/Code Reception frequency Power supply Maximum resistive load applicable to the relay Dimension (mm)

Voltage Current

TCSP240C04 2.4 GHz Lithium battery 115 x 65 x 40

RCSP240A04 2.4 GHz 12-24 V 30 V 1 A 118 x 52 x 25

29

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

Infra-red transmitter► Complete range on page 53

MASTER AND SLAVE TRANSCEIVER INTERACTION DIAGRAM

SaFETy DEVICES INTEgRaBlE IN THE SySTEM

Safety edge► Complete range on page 53


Slave and photocell

Master

Safety edge

Brake► Complete range on page 50

Infra-red photocell ► Complete range on page 53

30

The TAK access control system is simple and flexible. The suitably installed system receiver controls 4 outputs and manages from 1 to 2000 transmitters.New transmitters can be added simply by remotely authorising them in the TAK software – the new programmed transmitters will be sent to the user by post and will be immediately operative.In the event of transmitter loss all you need to do is programme a new one with the specific name and send it by post; again, it will work immediately while the lost transmitter will be automatically disabled.

To disable a transmitter all you need to do is send a disabling wireless signal to the receiver to block the specific transmitter and make it unusable.Transmitters can be reprogrammed with different functions always remotely.A user who controls certain accesses with a transmitter (e.g. door A. and B.) can be enabled to control other accesses (e.g. door A and C) by modifying receiver channels with no need for the installer to travel to the installation site.

OPERaTION PRINCIPlES

IDEAL TO MANAGE LARGE NUMBERS OF USERS IN RESIDENTIAL UNITSThe TAK access control system is the most flexible solution; it

ensures operation from 1 to 2000 remotely managed transmitters

for each receiver. The simple-to-use TAK system allows to carry

out easily and with high precision various operations such as:

adding and/or replacing transmitters, disabling transmitters in

case of loss, modifying transmitter channels with no need for

actually going to the residential complex where the receiver is

installed.

Extremely safe, the TAK system is equipped with a sophisticated

password protection to shield the opening and closing system

from any undesired intrusion.

Access management system with remote programming - TAK

TAK Programmer

Control software PC system

TAK transmitters to be stored Stored TAK transmitter

TAK receiver for managing memories

Operation diagram of the TAK remote access management system

31

AUTO

MAT

ION

SYST

EMS

(mai

n pr

oduc

ts)

PC software downloadable from the website:

www.telecoautomation.com

TAK transmitters to be stored

TAK receiver for memory management

TAK programmer

DEVICES THaT MaKE uP THE TaK SySTEM

HOW TO USE

Utilization of the TAK system is easy, quick and safe; few operations – programmed remotely – immediately enable the user to manage their accesses, thus saving time and human resource savings. Below we have included a summary description of the three basic operations for using the main devices that make up the TAK access management system.

1 download software from internet web site 2 connect the TAK programmer to the PC with a USB cable 3 store TAK transmitters via PC by means of the dedicated software TaK RECEIVERS: they are fitted with a removable memory module which is to be inserted directly in the TAK programmer. The receiver memory can be managed on the PC with the dedicated software.It is also possible to modify the data contained in the memory at the

same time as updating the software data base in case data have been stored in the receiver in the traditional manner.TAK TRANSMITTERS: they can be stored in the receiver both traditio-nally and via PC by means of the dedicated software. If a transmitter has been stored in the standard manner, it is possible to display current implementations on the computer screen by extracting the receiver me-mory module in which the remote control has been stored and inserting it into the TAK programming system.

Access management system with remote programming - TAK

PRODUCT SHEETS FOR AutomAtion systems And control devicesIn the following pages you will find a full range of accessories (transmitters, control units,

safety devices, receivers, sensors, etc..) to appropriately complete your automation systems.

They represent a very reliable equipment, designed to ensure great functionality and security to

automations as a whole.

33

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

868

MHZ TV LINK

34

T-One (for awnings)

APPLICATIONS

MTE45102

Ø45mm tubular motor with electronic limit switch and integrated radio for rolling shutters. Motor torque 10 Nm.Specific functions:Wireless limit switch adjustment from the transmitter, semi-automatic (1 automatic spot, 1 spot with the transmitter). Adjustment of the intermediate point with the wireless transmitter. Automatic rolling-up or down stop function in presence of obstacle. Wireless control of light, sun, rain and wind sensors. Highest precision, reliability and maintenance of the set values over time.

MTE45321Ø45mm Tubular motor with electronic limit switch and integrated radio. It is equipped with a system of progressive reduction of power during the movement of retraction of the awning. Motor torque 32 Nm. Specific functions:Wireless limit switch adjustment from the transmitter. Reduction of motor torque upon closure. Automatic compensation of fabric lengthening. Possibility to wireless control wind, sun and rain sensors. Highest precision, reliability and maintenance of the set values over time.

MTE45152 Version with motor torque 15 Nm.

TECHNICal SPECIFICaTIONS

SElECTION TaBlES

Common specifications


Speed 17 rpm Power supply 230V/50Hz

Operating time 4 min Cable 3 m

Weight 3,15 kg Receiver storage capacity

32 transmitters

Protection degree IP44

MTE45102 MTE45152

Motor torque 10 Nm 15 Nm

Power 150 W 170 W

Consumption 0.7 A 0.8 A

Motor torque 32 Nm

Power 250 W

Consumption 1.1 A

Speed 17 rpm

Power supply 230V/50Hz

Operating time 4 min

Cable 5 m

Weight 3,5 kg

Receiver storage capacity 32 transmitters


T-One (for rolling shutters)

Electrical motors for rolling shutters / awnings

APPLICATIONS

rolling shutters awnings45

8.50

61

R7.848.50

22.4 22.4152

45

8.50

61

R7.848.50

22.4 22.4

663 (563-32 Nm)

619 (519-32 Nm)15

2

Profile thickness < 10 mmRolling shutter maximum L. 2,5 m Rolling shutter maximum L. 3,5 m

Motor Torque 10 Nm

without safety stops 25kg with safety stops 21kg


Motor Torque 15 Nm



SPECIFICaTIONS

AWNING WIDTH MAXIMUM AWNING PROJECTION2 m 6 m3 m 4,8 m

L. max avvolgibile 2,5 m L. max avvolgibile 3,5 mMotor Torque

10 Nmwithout safety stops 21kg with safety stops 17kg


Motor Torque 15 Nm



Profile thickness < 15 mm

35

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

Adapters for tubular motors Ø 45mm

MT450520Groov 70

MT450511Octagonal 52

MT450512Star 60

MT450515Round 70

MT450517Round 80 ZF

MT10055Support for snap

cylindrical motor

head

MT450521Groov 78


MT450505Round 50

MT450508Round 54

ZF Deprat 53

MT450507Welser 63

Deprat 62

MT10110Support for

metallic motor

head

MT450513Groov 85

Imbac


MT450506Round 60

MT450509Round 64 ZF

MT450516Deprat 89

868

MHZ TV LINK

36


Portable trasmitters

Power supply 3V ± 10%

(lithium battery CR2032)

Operating temperature range -10°C +55°C

TVTXE868a02Wireless hand transmitter for the control of 2 automations or of 1 automation with separate buttons.

TVTXE868a04 Wireless hand transmitter for the control of 4 automations or of 2 automations with separate buttons.

TXPi-Like

868

MHZ TV LINK


TVTXP868a01

Wireless hand transmitter with wall fixing support for the control of 1 automation.

TVTXP868a02Wireless hand transmitter with wall fixing support for the control of 2 automations or of 1 automation with separate buttons.

TVTXP868a04 Wireless hand transmitter with wall fixing support for the control of 4 automations or of 2 automations with separate buttons.



Operating temperature range -10° +55°C

TVTXP868A01

33

59

TVTXP868A02

35

65

TVTXP868A04

APPLICATIONS

rolling shutters

awnings

rolling doors

industrial doors and gates

APPLICATIONS

rolling shutters

awnings

rolling doors


37

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

TVTXQ868S03Wireless hand transmitter for the control of 1 awning with SUN-ON and SUN-OFF function in the motor and in the control unit TVPRL868A02.•When the SUN-OFF function is active, the awning does not

retract and stays open if there is no sun.•WhentheSUN-ONfunctionisactive,theawningretractswhen

there is no sun. It is possible to set through the wireless transmitter the desired

sun level in the control unit. •Transmitterwithwallfixingsupport.

TVTXQ868SN03

Version in black.

TECHNICal SPECIFICaTIONS TECHNICal SPECIFICaTIONS




Pod




Pod

TVTXQ868a03

Wireless hand transmitter for the control of 1 rolling shutter or awning with open-stop-close function.Wall fixing support.

TVTXQ868N03

Version in black.

42 50

10012

2

42 50

10012

2

Sun OnSun Off

APPLICATIONS

rolling shutters

awnings

APPLICATIONS

awnings

38

TVTXM868a03

Wireless wall and table transmitter for the control of 1 rolling shutter or awning with open-stop-close function.

TVTXM868N03

Version in black.





Pod

TVTXQ868a18Wireless hand transmitter for the control of 6 rolling shutters or awnings. Possible group commands with open-stop-close function. Wall fixing support.

TVTXQ868N18Version in black.

42 50

10012

2

Portable and table / wall transmitters 868

MHZ TV LINK

Mouse





80

80

APPLICATIONS

rolling shutters

awnings

APPLICATIONS

rolling shutters

awnings

39

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

Wall transmitters

TECHNICal SPECIFICaTIONSTECHNICal SPECIFICaTIONS

TVTXI868BB03Wireless wall transmitter for the control of 1 rolling shutter or awning with open-stop-close function in polycarbonate available in white and black (code: TVTXI868NN03). Interchangeable frames in different colours and materials available on request:

IntenseIntense

TVTXI868BB06 Wireless wall transmitter for the control of 2 rolling shutters or awnings with open-stop-close function in polycarbonate available in white and black (cod: TVTXI868NN06). Interchangeable frames in different colours and materials available on request:

POLY GLASS(Transparent polycarbonate)

IRON(Stainless steel)

GLASS(Glass)

SPLIPQ3B1T

SPLIPQ3N1T

SPLIMQ3S1

SPLIVQ3B1

SPLIVQ3N1

POLY GLASS(Transparent polycarbonate)

IRON(Stainless steel)

GLASS(Glass)

SPLIPQ6B1T

SPLIPQ6N1T

SPLIMQ6S1

SPLIVQ6B1

SPLIVQ6N1







868

MHZ TV LINK

86

86

86

86

APPLICATIONSAPPLICATIONS

rolling shutters

awnings

rolling shutters

awnings

40

Timer / keypad transmitters



(alkaline battery)


TVTXK868B04Wireless keypad with a five-digit access code, white colour. 4-channels, 3 of them are encoded and 1 is free. IP54 protection degree.

TVTXK868a04Version in black.

1 2 3

4 5 6

7 8 9

% 0 *

75

115





TVTXC868C04

Wireless timer wall transmitter for the control of 2 automations in white colour with display.

Possible functions:•weeklyprogramming;•astrofunctionwithgeolocationfordawn/sunset;•presencesimulation.

86

86

868

MHZ TV LINK

TXK

rolling doors

industrialdoors andgates

Clock

rolling shutters

awnings

APPLICATIONS APPLICATIONS

41

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

SK0001-1

Double button mechanic switch. Open-stop-close for rolling shutters and awnings. Square frame, white colour. Current 16A. Mechanical blocking to avoid pressing the buttons simultaneously.

SK0003-1

Double push-button switch. Open-stop-close for rolling shutters and awnings. Square frame, white colour. Current 16A. Mechanical blocking to avoid pressing the buttons simultaneously.

SK0001 SM0062 SM0063SK0003

80

80 80

40

SM0062

3-position mechanic switch. Open-stop-close for rolling shutters and awnings. Current 16A.

SM0063

3-position push button. Open-stop-close for rolling shutters and awnings. Current 16A.

Mechanical switches868

MHZ TV LINK

27

32

7676

SK SM

rolling shutters

awnings


rolling shutters

awnings

SKINSOFT

Dimensions TVPRI868BB01 86 x 86 x 35 mm

Dimensions TVPRH868A01-S 80 x 80 x 35 mm

42

868

MHZ TV LINK

Control units for rolling shutters motors


Power supply 230 Vac

Maximum commutable power at the relay 350 W

Wireless control units with soft-touch buttons for rolling shutter motors up to 350W. They can be inserted in the wall box of the switch. Automatic open-stop-close function.

Ideal for:1) Renovation: it can replace the mechanic switch. Possibility of group commands where only local control was possible, without any wall work.2) New houses: possibility of mixed installations with motor connected to the control unit and wireless command.3) Energy saving: only one multi-channel wireless transmitter is needed for centralized or single commands. There’s no need of one transmitter

for rolling shutter, since the single command is carried out directly on the receiver.4) Compatibility: will all transmitters of the TVlink range.5) It is possible to temporarily disable 1 rolling shutter from the group control.

TVPRH868a01-STVPRI868BB01

INTENSE SOFT

230V

rolling shutters


rolling shutters

43

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

STECHNICal SPECIFICaTIONS

TVPRD868a01TWireless control unit for rolling shutter motors up to 350W for 55mm diameter electrical boxes. Input for 1 dynamic push button.


TVPRT868a01T

Wireless control unit for rolling shutter motors up to 350W for integration into the rolling shutter casing. It is supplied with 1 meter power supply cable. Input for 1 dynamic push button.




Dimensions 118 x 20 mm




Dimensions 54 x 49 x 25 mm

230V power supply

Antenna

Close

Open

Common

Input for dynamicpush button

230V power supply

Input for dynamicpush button

Motor output


rolling shutters

rolling shutters

44

TECHNICal SPECIFICaTIONSTECHNICal SPECIFICaTIONS

TVPRS868a24

Wireless control unit for 24V rolling shutter motors for integration into the rolling shutter casing. Open-stop-close function. Input for 1 dynamic push button.

TVPRS868a12

Version for 12V motors.

TVPRV868a24

Wireless control unit for 24V motors for Venetian blinds with open-stop-close function. It allows regulating the inclination of the blinds. Input for command through an external push button. Two operating ways are possible:• withshortimpulses(from50to300ms),thepartialinclination

of the position of the Venetian blinds both in the opening and in the closing directions;

• with impulses longer that 300ms, the complete automaticmovement of the Venetian blinds in the opening and in the closing directions.

TVPRS868a01

Wireless control unit for rolling shutter motors up to 350W for integration into the rolling shutter casing. Input for 1 dynamic push button.

TVPRS868a02

Wireless control unit for rolling shutter motors up to 350W for integration into the rolling shutter casing. Separate input for 2 push buttons: open and close push button.

Control units for rolling shutters motors868

MHZ TV LINK





Power supply 12/24 Vac

Maximum commutable power at the relay:

Voltage 24 Vac

Current with cos ph1 (with resistive load) 10 A



rolling shutters

APPLICATIONS

rolling shutters

Venetian blinds

APPLICATIONS

45

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

LUX-01: Sun SensorSun sensor with photodiode.Light range from 1 Klux to 100 Klux.

Accessories for control units

TVPRl868a02

Wireless control unit for awnings motors up to 350W. Input for sun sensor and anemometer. Automatic opening in case of exceeding of the set light threshold. Automatic closure in case of exceeding the set wind threshold.•Possibilityofactivationanddeactivationofsunfunction•possibilityofactivationanddeactivationofwindfunction•inputforAnemometer: If the wind speed exceeds the set threshold value, the sensor sends a closure command. If the speed drops below the threshold value, an opening command will be activated.•inputforSun Sensor: If the light intensity exceeds the set threshold value, the sensor sends an opening command. If light intensity drops below the threshold value for more than 10 min., a closing command will be activated.


Wind regulation Light regulation

Antenna

Power supply

Motor output

Control units for awnings motors

ANEM4: Anemometer Wind sensor with reed contact with 4 impulses per revolution.

868

MHZ TV LINK





awnings

APPLICATIONS

46

Weather and alarm sensors for rolling shutters

Light / anti-intrusion sensor Kit Alarm

TECHNICal SPECIFICaTIONS - TVgSa868a01

TECHNICal SPECIFICaTIONS - TVSSH868a01


TVlKIT-a300Alarm kit for the surveillance and control of rolling shutters and doors consisting of: TVSSH868a01 Wireless shock sensor for forcing, sharp mo-vement. Power supply: battery.TVgSa868a01 Wireless socket for alarm signals with buzzer and LED. Power supply 230V.

The wireless shock sensor positioned on the rolling shutter sends wireless signals to the socket with buzzer to indicate an attempt to break in.

TVSlI868a01Sensor with sucker to be fixed to the glass of the window for the detection of light intensity to control the shaded area. If the light intensity exceeds the threshold value, the lowering of the shutter will be activated. The device is also equipped with a vibration sensor which, in case of damage of the glass, sends a signal to the alarm system of the house. Product complementary to tubular motor T-ONE.

Power supply 3 V (lithium battery CR 2032)

Operating temperature range -10 + 55ºC



Power supply 230 V

Buzzer power 100 db

Operating temperature range -20 +60°C


Power supply 3 V (lithium battery CR2032)



50

TVGSA868A01

Shock

868

MHZ TV LINK

rolling shutters rolling shutters

rolling doors


47

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

Power supply 230V


Survival signal sent automatically



ANEM4: Anemometer LUX-01: Sun Sensor RAIN100: Rain Sensor

Weather sensors for awnings

Connected sensors

Wireless 230V sensor


TVaNluX868SWR230V wireless transmitter to which it is possible to connect sun, wind and rain sensors. It is possible to set the intervention thresholds of the sensors to obtain the best level of comfort. The signal of exceeding the th-reshold level is sent wireless to the motor that will open or clo-se the awning in accordance to the impulse sent.

Wireless vibration sensor


TVSVB868a01Wireless sensor to be placed on the movable part of the awning that detects vibrations of the structure stressed by the wind. It is provided with 4 thresholds of intervention; if the vibration of the awning exceeds the set values the sensor sends to the control unit a closing command. The sensor is compatible with control units and motors of the TVLINK series. Power supplied with 2 AA batteries with 3 years of autonomy. It is provided of basis for a snap fixing. To replace the battery remove it and reposition it on the base.

Power supply 2 batterie 1,5V AA

Operating temperature range -10 +55°C



awningsawnings


868

MHZ TV LINK

48

TVPRP868a08l

Control unit for the wireless command of rolling doors in outdoor box for motors up to 400W with 25W lamp integrated. In the basic version the safety devices are connected by wire. Automatic detection of mechanical limit switch (working time automatic). Input for infrared safety edge and for traditional photocell. Input for magnet for safety exclusion in the last 5 cm before the complete closure. Button input for manual control and possibility to memorize a transmitter with a forced door alarm function. Output for courtesy light or door alarm. (Optional keypad).

• Optional wireless safety control thanks to the “My SaFE kit.”

Control units for rolling doors motors

Accessories for My DoorPuSH BuTTON

Open/Stop/Close fixed

on the cover.

KEyPaDWith Open/Stop/Close function, fixed on the cover with control LED, voltage and photocell alignment.

CaBlE



Motors up to 400 W



TVPRP868a08Control unit for the wireless command of rolling doors in outdoor box for motors up to 400W. In the basic version the safety devices are connected by wire. Automatic detection of mechanical limit switch (working time automatic). Input for infrared safety edge and for traditional photocell, input for magnet for safety exclusion in the last 5 cm before the complete closure. Button input for manual control and possibility to memorize a transmitter with a forced door alarm function. Output for courtesy light or door alarm.

• Optional wireless safety control thanks to the “My SaFE kit.”

My DoorMy Door



Motors up to 400 W



Power supply 230V

230V

Technical diagram of My Door control unit

Functioning of the My-Door control unit with safety devices by wire.

rolling doors

rolling doors


49

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

STECHNICal SPECIFICaTIONS

Radio Safe


Motors up to 400 W



Kit My Safe

Power supply Motor outputCourtesy light output

Inpu

ts

MASTER

SLAVE

MTRX2.4GA08KIT

Kit for the security of rolling doors including a MASTER receiver (Electronic Board) to be connected to the control unit and a SLAVE device (TCSP) to be fixed on the door and to be connected to the photocell of the safety edge. The communication between these devices is wireless eliminating the wiring between the control unit and the safety edge. The SLAVE device connected to the photocell of the safety edge transmits the information to the MASTER allowing to secure the area of movement of the shutter door. If an obstruction is detected (people, animals, things) the SLAVE device immediately sends a signal to the MASTER that will instantly stop the door.

SLAVE

MASTER

Functioning of the My-Door control unit with wireless safety device of Kit My-Safe

(optional)

rolling doors

rolling doors


TVPRW868I04

Wireless control unit integrated in the end plate of the rolling door for the control of tubular motors up to 400 W. This control unit is particularly suitable to be fitted to the door in the production line, assuring considerable advantages for the installer. Guaranteed door installation in compliance with EN13241 norm. Input for brake, for push button and output for courtesy light.

Radio Safe: integrated system for the wireless control of safety edge of the rolling door

in combination with TCSP240a04


Carrier frequency 2.4 GHz

Power supply 3,6V ± 10%

(lithium battery)

Battery life 2 years

with 6 openings per day




50

868

MHZ TV LINK

Safety devices for rolling doors

According to EN 13241



TPa-F1C18Fall protection mechanism for rolling doors.

TSIG-DL30Courtesy LED light ideal for rolling doors. Fixing support and power supply cable included.

TPa-TSNC18T TPa-F1C18

Output shaft 18 mm square 18 mm square

Moment of maximum arrest 591 Nm 235 Nm

Admissible torque 145 Nm 86 Nm

Shutter speed 22 laps/min. 20 laps/min.

Weight: 0,83 Kg Weight: 1,4 Kg

Operating temperature range -20° +60°C -20° +60°C

Protection degree IP65 IP65

Power supply 230 V

Power 5 W


BrakeTransceiver TCSP

Courtesy light Doorled

TCSP240a04

Security device for rolling doors compatible to the TVPRW Radio Safe control unit.2.4Ghz Transceiver to be placed on the bottom profile of the door and to be connected to the photocell of the safety edge.Input with power supply for photocell (model TPS) and input for 8,2 Kohm safety edge.

Alarm signal: if there is an obstacle the SLAVE device sends an alarm signal to the control unit that re-opens the door.

TPa-TSNC18TFall protection mechanism for rolling doors.

225

35

rolling doors

rolling doors


rolling doors

APPLICATIONS

51

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

rolling doors


rolling doors


APPLICATIONS

APPLICATIONS

Infrared transmitter TPS Spiral cable

Safety edge Rubber ProfileRubber profiles.Available in different versions.

TPS-PV154000Rubber profile h=29,5mm(price per meter – 50m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 14,5 to 9,8mm.

TPS-alu2509Aluminium guide(pieces of 2,5m – price per meter).

TPS-Pa257501Rubber profile h=55mm(price per meter – 22m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 25 to 19,5mm.

TPS-PV143601Rubber profile h=28mm(price per meter – 50m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 9,6 to 7,5mm.

TPS-OSE-B3512Bumper for safety edge.TPS-PV143601 and PV154000.

TPS-OSE-B3516Bumper for safety edge.TPS-PA204001.


Price per unit – 2 pieces per profile

TPSIR transmitter photocell with self-balancing adjustment. 11.5 mm diameter. 10 m maximum range. 10.5 m cable. IP65 housing.IR receiver with 0.5 m cable. 11.5 m diameter. IP65 housing.Available in the following versions:TPS-S1102l TPS-SW12lP

25

9

12

1,5

2,5

3

9

15

20

7,5

2

1,52

2,5

30

10

ø 10,9

9

20

60

15,519,525

2,5 3

3

ø 10,9

3,2

14

9,6

2,3

1,3

288

ø 11

14,5

9,8

5,83

1,5

2,7

29,5

10

ø 10,9

TPS-Pa204001Rubber profile h=30mm(price per meter – 25m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 20 to 15\mm.

TPS-001JB6.5 m spiral cable with junction box.

According to EN 13241

RCSP240a04Master transceiver with integrated antenna to be connected to the autotest input of the motor control unit.

•Connectedtothesafetyinputofthecontrolunit•Itcontrolsseparately1safetyalarmforopeningand1safety alarm for closing•RelaycontactforflatbatteryalarmintheSLAVEdevice•1MASTERcancontrol2SLAVEdevices•TobeusedincombinationwiththeTCSPSLAVE


Reception frequency 2.4 GHz

Power supply 12-24 V

Maximum commutable power at the relay:

Voltage 30 Vac

Current 1 A



Low battery alarm

Controlinput

Power supply

Alarm 2 contact

Alarm 1 contact

TCSP240C04Transceiver to be fixed to the door and connected to the photocell of the safety edge.

•Inputwithpowersupplyforphotocell(modelTPS)•Inputfor8,2Kohmsafetyedge•10mrange•Inputformagneticcontactforpedestriandoorforgarageand industrial doors•TobeusedincombinationwithTVPRWandRCSP.


Reception frequency 2.4 GHz

Power supply 3,6V ± 10% (lithium battery)

Battery life 2 years with 6 openings per day

Operating temperature

range

-10° +55°C



52

868

MHZ TV LINK

Safety devices for industrial doors

Kit Radio Safe

115

65

APPLICATIONS

Industrial doors and gates

53

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S


Power supply 12 / 24Vdc

Range 10mt outdoors

Maximum commutable power at the relay 24Vdc: 60VA, 30W



FTC010A01Photocell that detects obstacles within the range of the automation. When it detects an obstacle, the photocell sends a signal to the control unit that stops the movement of the automation for the maximum safety of people and objects.

Infrared photocell

Infrared transmitter TPS

Safety edge Rubber ProfileSafety edge Rubber Profile.

TPSIR transmitter photocell with self-balancing adjustment.11.5 mm diameter. 10.5 m maximum range. 6.5 m cable.IP65 housing.IR receiver with 0.5 m cable. 11.5 m diameter.IP65 housing.Available in the following versions:TPS-S1102l TPS-SW12lP

TPS-Pa204001Rubber profile h=30mm(price per meter – 25m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 20 to 15 mm.

TPS-PV154000Rubber profile h=29,5mm (price per meter – 50m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 14,5 to 9,8mm.

TPS-Pa257501Rubber profile h=55mm (price per meter – 22m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 25 to 19,5mm.

TPS-alu2509Aluminium guide (pieces of 2,5m – price per meter).

TPS-PV143601Rubber profile h=28mm (price per meter – 50m reel)Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 9,6 to 7,5mm.

TPS-OSE-B3512Bumper for safety edge.TPS-PV143601 and PV154000.



Price per unit – 2 pieces per profile

APPLICATIONS

APPLICATIONS

APPLICATIONS


rolling doors


rolling doors


868

MHZ TV LINK

54

GSM control units



Power supply 12Vdc

GSM Quad-band


Maximum commutable power at the relay 5A





Maximum load through the plug 5 A / 250 Vac

Maximum resistive load at the relay contact 1 A / 48 Vac



TVgSM200GSM receiver with integrated RF module and management of wireless transmitters with SMS.

Possibility to activate:- 2 relays with wireless transmitters of the TV TVlink range.- 1 relay with free phone call.- 2 relays with SMS.- Possibility to memorize and to delete transmitters in the memory of

the wireless receiver sending an SMS.- Possibility to activate or deactivate a telephone number by sending an SMS.- Possibility to enable a telephone number to activate the relay for a

limited number of times (from 1 to 999) sending and SMS.- Relay outputs with monostable, bistable or timed function.- The control unit sends an SMS or phone calls to 8 phone numbers.- Possibility to memorize up to 300 phone numbers from which it is

possible to call to command the control unit.- Possibility to memorize up to 100 wireless transmitters.- Possibility to manage the transmitters and the control unit via PC or SMS.

Available also in the versions without RF module cod. TVgSM000.

TVRPl868a01P230V plug in receiver with 1m cable to be connected to the push button input of the garage door motor. Ideal for the integration of the already motorized garage doors with the TVlink range of transmitters.

Batteryinput 12Vdc

Power supply 12Vdc

Output relay 1Output relay 2

Antenna

Receivers for industrial doors and gates868

MHZ TV LINK




55

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S


Power supply TVRCV868A01 230 Vac

Power supply TVRCE868A01 12/24 Vac/dc


Maximum commutable power at the relay

Voltage 30 Vac

Current 1A




Power supply 12/24 Vac/dc


Maximum commutable power at the relay

Voltage 30 Vac

Current 1A


Dimensions TVRCM868A02 60 x 90 x 26 mm

Dimensions TVRCM868A2000 118 x 52 x 25 mm

TVRCM868a02

2-channel wireless receiver for control units for industrial doors and gates. It can manage up to 99 transmitters. Power supply 12/24Vdc. Impulsive function.

TVRCM868a20002-channel wireless receiver for control units for industrial doors and gates. Possibility to memorize up to 2000 transmitters. Impulsive function. Power supply 12/24Vdc.

TVRCE868a01Wireless receiver for control units for industrial doors and gates provided for the insertion of 4 impulsive (MC001) or timer (MCTIM) relay modules. Equipped with 1 impulsive relay module; possibility to insert 3 additional ones.

TVRCV868a01230V Version

Output relay 4

Dip-switch for the setting of the channel functions

Power supply 12 or 24V, common

ACCESSORIES

MC001Impulsive relay module.

MCTIMTimer relay module.

aNT868868MHz stylus antenna.

Receivers for industrial doors and gates

APPLICATIONS


APPLICATIONS


APPLICATIONS


56

KIT COMPOSED By

1 programmer TAKUSB

1 USB cable

1 power supply unit for TAKUSB

TaKuSB001USB programmer to set the memory of the transmitters via LED. To be connected to the PC through USB cable.


Reception frequency 868.3 MHz

Power supply 3V ± 10% (lithium battery CR2032)



TaK868C02Wireless hand transmitter for the control of 2 automations or of 1 automation with separate buttons.

TaK868C04 Wireless hand transmitter for the control of 4 automations or of 2 automation with separate buttons.

TAK - PC programmable transmitters for gates and doors

TaK868a01

Wireless hand transmitter with wall fixing support for the control of 1 automation.

TaK868a02Wireless hand transmitter with wall fixing support for the control of 2 automations or of 1 automation with separate buttons.

TaK868a04 Wireless hand transmitter with wall fixing support for the control of 4 automations or of 2 automations with separate buttons.


Power supply 3 V ± 10% (lithium battery CR2032)




35

65

TAK868A01

33

59

TAK868A02 TAK868A04

868

MHZ TAK

57

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

TAK - PC programmable transmitters for gates and doors

TaKRCV868a044-channel outdoor receiver with display. Power supply 230V, memory up to 2000 transmitters. Each relay can be programmed with impulsive, ON/OFF or timed output.

TaKRCE868a04

4-channel outdoor receiver with display. Power supply 12/24V, memory up to 2000 transmitters. Each relay can be programmed with impulsive, ON/OFF or timed output.


Power supply TAKRCV 230 Vac

Power supply TAKRCE 12/24 Vac/dc


Maximum power at the replay with

resistive load

30 Vac 1A




TAKMEM2000Programmable memory module for 2000 users for TAKRCM receivers.

TaKMEM2000BProgrammable memory module for 2000 users for TAKRCV and TAKRCE receivers.


Power supply 12/24 Vac/dc


Maximum power at the replay with resistive load 30 Vac 1A


Dimensions TAKRCM868A04 118 x 52 x 25 mm Dimensions TAKRCM868A02 60 x 90 x 26 mm

TaKRCM868a042-channel mini outdoor receiver. Power supply 12-24 V. Memory up to 2000 transmitters. Relay with impulsive function. (programmable).

TAKRCM868A04

TAKRCM868A02

TaKRCM868a022-channel outdoor mini receiver. 12 / 24 V power supply. Relay with impulsive function. Memory up to 42 users (not programmable).


58


Modulation AM/ASK




TXP433a01 Mini wireless transmitter with wall fixing support for the control of 1 automation.

TXP433a02Mini wireless transmitter with wall fixing support for the control of 2 automations or of 1 automation with separate buttons.

TXP433a04 Mini wireless transmitter with wall fixing support for the control of 4 automations or of 2 automations with separate buttons.



Modulation AM/ASK

Power supply 3 V ± 10% (alkaline battery GP23A)



Modulation AM/ASK




TXR434A02 Mini wireless transmitter for the control of 2 automations or of 1 automation with separate buttons.

TXR433A01 Wireless transmitter for the control of 1 automation.TXR433A02 Wireless transmitter for the control of 2 automations or of 1 automation with separate buttons.TXR433A04Wireless transmitter for the control of 4 automations or of 2 automations with separate buttons.

433MHz Transmitters

48

84

33

59

TXP433A01

33

59TXP433A02 TXP433A04

4

33 M

HZ

59

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S


TXW433A02Wireless wall transmitter for the control of 2 automations or of 1 automation with separate buttons.

TXW433A04 Wireless wall transmitter for the control of 4 automations or of 2 automations with separate buttons.

Modulation AM/ASK

Power supply 12 V ± 10% (alkaline battery GP23A)



86

86Modulation AM/ASK

Power supply 9 V ± 10% (alkaline battery)





TXK433B04Wireless keypad with a five-digit access code. 4-channel, 3 of them are encoded and 1 is free. Available also in white colour (TXK433B04WHI).

1 2 3

4 5 6

7 8 9

% 0 *

75

115

60



Power supply 12-24 Vac/dc


Maximum power at the replay:

Voltage 30 Vac

Current 1 A



Power supply RCV433A01 230 Vac ± 10%

Power supply RCE433A01 12/24 Vac/dc ± 10%


Maximum power at the replay:

Voltage 30 Vac

Current 1 A



RCM434A011-channel receiver with memory to manage up to 85 transmitters. Memory to manage up to 340 1-channel transmitters is available. Impulsive function.

RCM434A02 2-channel receiver with memory to manage up to 85 transmitters. Memory to manage up to 340 1-channel transmitters is available.Impulsive function.

RCE433A01Receiver for control units set for the insertion of 4 impulsive relay modules. 1 is inserted and possibility to insert 3 additional ones. Equipped with memory strip up to 85 users; available memory strip up to 340 1-channel transmitters.Power supply 12/24 Vac.

RCV433a01Version power supplied 230V.

433MHz Receivers

AntennaRelay contact CH 1

Relay contact CH 2-3-4

Output relay 4

Dip-switch for the setting of the channel functions

Power supply 12 or24V. common

4

33 M

HZ

61

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

RELAY AND MEMORY MODULES

ACCESSORIES

MEM85 Memory strip up to 85 users.

MC001Impulsive relay module.

MCTIMTimer relay module.

MEM340Memory strip up to 340 users.

MCMEMMemory relay module.

ANTENNA 433

ANT433433MHz stylus antenna.

RF - DETECTOR

Power supply 1 x 9V battery (alkaline)

Frequence 433,92 MHz o 868,3 MHz

Operating temperature -20° +60°C



Frequency detector for radio signals in 433,92 MHz and 868,3 MHz.

62

Electric Locks

ST46-C 5012aPower supply 12 Vac

ST46-C 5012CPower supply 12 Vdc

ST46-C 5024C Power supply 24 Vdc

Electric lock with 1 front cylinder and 1 rear cylinder 50 mm long

ST46-C 9012aPower supply 12 Vac

ST46-C 9012CPower supply 12 Vdc

ST46-C 9024C Power supply 24 Vdc

Electric lock with 1 front cylinder and 1 rear cylinder 90 mm long

ST46-P 0012aPower supply 12 Vac

ST46-P 0012CPower supply 12 Vdc

ST46-P 0024CPower supply 24 Vdc

Electric lock with front knob and 1 rear cylinder

ST46-Ca 0012aPower supply 12 Vac

ST46-Ca 0012CPower supply 12 Vdc

ST46-Ca 0024CPower supply 24 Vdc

Electric lock with front cylinder for automatic gates

63

PROD

UCT

SHEE

TS F

OR A

UTOM

ATIO

N SY

STEM

S AN

D CO

NTRO

L DE

VICE

S

ST46-B 0012aPower supply 12 Vac

ST46-B 0012CPower supply 12 Vdc

ST46-B 0024CPower supply 24 Vdc

Electric lock with front knob for up-and-over doors

ST46-PE 0012aPower supply 12 Vac

ST46-PE 0012CPower supply 12 Vdc

ST46-PE 0024CPower supply 24 Vdc

Electric lock for European profile cylinder (without cylinder)

ST/CPCounter plates

ST/12Vac12 Vac. coil

ST/12Vdc12 Vdc. coil

ST/24Vdc24 Vdc. coil

ST/ITSteel ground plate

Accessories for electric locks

Teleco Automation reserves the right to make changes to the products without prior notice and refuses any responsibility for any possible transcript errors in this document

LEVE

R P

LAN

TELECO AUTOMATION S.r.l.

Via dell’Artigianato, 16

31014 Colle Umberto (TV) - ITALY

Tel. +39.0438.388511

Fax +39.0438.388536

www.telecoautomation.com

[email protected]

Teleco Automation France10 Rue Fulgencio Gimenez

Parc Generation 369120 Vaulx en Velin - France

Tel. +33.(0)472.145080Fax +33.(0)472.140503www.telecofrance.com [email protected]

Teleco Automation GmbHHallbergmooser Str. 5

85445 Oberding / SchwaigDeutschland

Tel. +49.(0)8122.9563024Fax +49.(0)8122.9563026

www.telecoautomation.com [email protected]

Automazioni Eng

Documents

Transcript of Automazioni Eng