Automationsystems Drivesolutions Motorsdownload.lenze.com/TD/Gxx geared motors angle inverter... ·...
Transcript of Automationsystems Drivesolutions Motorsdownload.lenze.com/TD/Gxx geared motors angle inverter... ·...
Automation systemsDrive solutions
ControlsInvertersMotorsGearboxesEngineering Tools
Motors:MF three-phase AC motors
Gearboxes: GKR bevel gearboxes, GKS helical-bevelgearboxes, GSS helical-worm gearboxes
L-force catalogue
!No�fica�on of change!The GKR03 gearbox has beenreplaced by the new, iden�callyconstructed g500-B45 gearbox.Do not order the GKR03 anymore.
h�p://www.lenze.com !
Lenze makes many things easy for you.About Lenze
Amatter of principle: the right products for every application.
L-force product portfolio
1.1Controller-based AutomationAutomation systems
1.2Drive-based automation
2.1HighLine tasksDrive solutions
2.2StateLine tasks
2.3BaseLine tasks
3.1Controller 3200 CCabinet ControllerControls
3.2I/O system 1000
3.3Controller p500Panel Controller
3.4Monitor Panel'
4.1Inverter Drives 8400 protecDecentralisedInverters
4.2Inverter Drives 8400 motec
4.3Inverter Drives SMV IP65
4.4Servo Drives 9400 HighLineCabinet
4.5Inverter Drives 8400 TopLine
4.6Servo Inverters i700
4.7Inverter Drives 8400 HighLine
4.8Inverter Drives 8400 StateLine
4.9Inverter Drives SMV IP31
4.10Inverter Drives 8400 BaseLine
5.1MCS synchronous servo motorsServo motorsMotors
5.2MD☐KS synchronous servo motors
5.3MQA asynchronous servo motors
5.4MCA asynchronous servo motors
5.5MF three-phase AC motorsThree-phase AC motors
5.6MH three-phase AC motors
5.7MD three-phase AC motors
5.8m300 Lenze Smart Motor
5.9MD/MH basic three-phase AC motors
6.1g700-P planetary gearboxAxial gearboxGearboxes
6.2MPR/MPG planetary gearboxes
6.3g500-H helical gearbox
6.4GST helical gearboxes
6.5g500-S shaft-mounted helical gearbox
6.6GFL shaft-mounted helical gearboxes
6.7g500-B bevel gearboxRight-angle gearbox
6.8GKR bevel gearboxes
6.9GKS helical-bevel gearboxes
6.10GSS helical-worm gearboxes
6.11Assignment see aboveMotor data
7.1NavigatorEngineering Tools
7.2Drive Solution Designer
7.3Drive Solution Catalogue
7.4Engineer
7.5PLC Designer
7.6VisiWinNET®
7.7EASY Starter
Selected portfolio
Additional portfolio
Contents of the L-force catalogue
Lenze makes manythings easy for you.Withourmotivated and committed approach,weworktogether with you to create the best possible solutionand set your ideas inmotion - whether you are lookingto optimise an existingmachine or develop a new one.We always strive to make things easy and seek perfec-tion therein. This is anchored in our thinking, in ourservices and in every detail of our products. It's as easyas that!
321
Implementing solutionsDrafting conceptsDeveloping ideas
Our easy formula for satisfied customers isto establish an active partnership with fast
We seewelcome challenges in yourmachinetasks, supporting youwith our comprehens-
Are you looking to build the best machinepossible and alreadyhave some initial ideas?
decision-making processes and an individu-ive expertise andproviding valuable impetusThenget thesedownonpaper togetherwithally tailored offer. We have been using thisfor your innovations. We take a holistic viewus, startingwith small innovative details andsimple principle to meet the ever more spe-of the individual motion and control func-stretching all the way to completely newcialised customer requirements in the fieldof mechanical engineering for many years.
tions here and draw up consistent, end-to-end drive and automation solutions for you
machines.Working together,wewill developan intelligent and sustainable concept that
- keeping everything as easy as possible andas extensive as necessary.
is perfectly alignedwith your specific require-ments.
54
Ensuring productivityManufacturing machines
Productivity, reliability andnewperformancepeaks on a daily basis – these are our key
Functional diversity in perfect harmony: asone of the few full-range providers in the
success factors for yourmachine. After deliv-market, we can provide you with preciselyery, we offer you cleverly devised servicethoseproducts that youactually need for anyconcepts to ensure continued safe operation.machine task – no more and no less. Our L-The primary focus here is on technical sup-force product portfolio, a consistent platformport, based on the excellent application ex-for implementing drive and automation
tasks, is invaluable in this regard. pertise of our highly-skilled and knowledge-able after-sales team.
Amatter of prin-ciple:the right productsfor every application.
Lenze's extensive L-force product portfolio follows avery simple principle. The functions of our finely scaledproducts areassigned to the three linesBase-Line, State-Line or High-Line.
But what does this mean for you? It allows you toquickly recognise which products represent the bestsolution for your own specific requirements.
Powerful products with a major impact:• Easy handling• High quality and durability• Reliable technologies in tunewith the latest develop-ments
Lenze products undergo the most stringent testing inour own laboratory. This allows us to ensure that youwill receive consistently high quality and a long servicelife. In addition to this, five logistics centres ensure thatthe Lenze products you select are available for quickdelivery anywhere across the globe. It's as easy as that!
Controls
Engineering Tools
L-force product portfolio
Inverters
L-force product portfolio
Motors
L-force product portfolio
Gearboxes
L-force product portfolio
GKRbevel gearboxes0.55 ... 11 kW
Gearboxes
6.8 - 4List of abbreviationsGeneral information
6.8 - 5Product key
6.8 - 7Product information
6.8 - 8Functions and features
6.8 - 13Dimensioning
6.8 - 18Notes on ordering
6.8 - 19Ordering details checklist
6.8 - 23Permissible radial and axial forces at outputTechnical data
6.8 - 26Output backlash in angular minutes
6.8 - 27Moments of inertia
6.8 - 28Weights
6.8 - 31Selection tables
6.8 - 42Dimensions
6.8 - 51Hollow shaft with shrink discAccessories
6.8 - 52Mounting set for hollow shaft circlip: Proposed design forauxiliary tools
6.8 - 53Hoseproof hollow shaft cover
6.8 - 53Gearboxes with 2nd output shaft end
6.8 - 54Rubber buffer for torque plate
6.8 - 55Torque plate on threaded pitch circle
6.8 - 57Torque plate at housing foot
6.8 - 58Ventilations
GKR bevel gearboxesContents
6.8
List of abbreviations
Communauté EuropéenneCEEfficiencyηc=1Canadian Standards AssociationCSALoad capacitycDeutsches Institut für Normung e.V.DINRated frequency[Hz]fNElectromagnetic compatibilityEMCMax. axial force[N]Fax,maxEuropean standardENMax. radial force[N]Frad,maxInternational Electrotechnical CommissionIECSite altitude[m]HmaxInternational Mounting CodeIMRatioiInternational Protection CodeIPMoment of inertia[kgcm²]JNational Electrical Manufacturers AssociationNEMAMass[kg]mUnderwriters Laboratory Listed ProductULOutput torque[Nm]M2Underwriters Laboratory Recognized ProductUROutput speed[r/min]n2Verband deutscher Elektrotechniker (Associationof German Electrical Engineers)
VDERated speed[r/min]nNRated power[kW]PN
China Compulsory CertificateCCCTransition operating frequency[1/h]ShüCertificate for Russian FederationGOSTMax. ambient operating temperature[°C]Topr,maxCombined certification marks of UL for the USAand Canada
cURusMin. ambient operating temperature[°C]Topr,minRated voltage[V]UN, Δ
Certificate for UkraineUkrSEPRORated voltage[V]UN, Y
V00-en_GB-12/20136.8 - 4
GKR bevel gearboxesGeneral information
6.8
Product key
6.8 - 5V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Product key
Mounting position (A...F) and position of system blocks (1...6)
Without flange: 0Hollow shaft: 0Flange: 3, 5, 8 (3+5)Solid shaft: 3, 5, 8 (3+5)Terminal box / motec: 2, 3, 4, 5Hollow shaft with shrink disc: 3, 5
Gearbox designs
OptionsBasic versions
Standard efficiencyMotor efficiency OKS-G (primer: grey)Surface and corrosionprotection OKS-S (special paint according to RAL)Increased efficiency (IE2)
OKS-M (special paint according to RAL)No OKS (unpainted, aluminium housing)Surface and corrosionprotection OKS-L (special paint according to RAL)OKS-S (paint: RAL 7012)
CLP HC 320 (synthetic)LubricantCLP 460 (mineral)LubricantCLP HC 220 USDA H1 (synthetic)
Breather elements for GKR06VentilationDriven shaft: VitonShaft sealing rings
Rubber buffer for torque plate (GKR 03/04only)
Accessories
Torque plate on threaded pitch circleHousing foot torqueplate (GKR05/06only)2nd output shaft endShrink disc coverHoseproof hollow shaft coverMounting set for hollow shaft circlip
Metal nameplate (supplied loose)NameplateAdhesive nameplate (supplied loose)
V00-en_GB-12/20136.8 - 6
GKR bevel gearboxesGeneral information
6.8
Product information
DesignsLenze provides a geared motor construction kit, which covers a widerangeof requirements. Numerous drive-side andoutput-side optionsenable precise adaptationof thedrive to the specific application. This • 2-stage and -stage gearboxesis the basis for versatile applications and functional scalability of ourgearboxes and geared motors.
• Hollow shaft with keyway or shrink disc• Solid shaft with keyway
The modular concept and high power density make extremely com-pact sizespossible.Optimised teethprofiles andgroundgears ensure
• Foot or flange mounting• Torque plate, including rubber buffer
low-noise operation and lowbacklash. The gearboxes are of compactand hence space-saving construction.
• With MF three-phase AC motors (inverter-optimised)power range 0.55 … 7.5 kW
For maximum efficiency
Our bevel gearboxes are a showpiece for lightweight engineering.They are also highly efficient and are equipped with wear free teeth.Together with three-phase AC motors and servo motors, they formand efficient and compact drive unit. They are available as a 2-stageversion with a torque of up to 450 Nm and a ratio of up to i=76.
Inverters for motor-proximity installation
The Drive Package with decentralised Inverter Drives 8400 moteccovers a power range up to 7.5 kW.
Bevel geared motor GKR05-2M HBR 090-32
6.8 - 7V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Functions and features
Gearbox type
GKRHousing
CuboidDesign
Aluminium / cast ironMaterialSolid shaft
with keyway to DIN 6885Design
m6 (d > 50 mm)Tolerancek6 (d ≤ 50 mm)
Tempered steel C45 or 42CrMo4MaterialHollow shaft
H: with keywayDesignS: smooth
Bore H7Tolerance
Tempered steel C45MaterialToothed parts
Optimised tooth flanks and profile geometryDesignGround tooth flanks
Case-hardened steelMaterialShaft-hub joint
1st stage/prestage/helical (bevel) gearbox: Friction-type connectionOutput stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection
Shaft sealing rings
With dust lipDesign
NB / FPMaterialBearing
Ball bearing / tapered-roller bearing depending on size and designDesignLubricants
DIN 51502Standard
corresponding to mounting position (see operating instructions)QuantitiesMechanical efficiency
1-stage gearboxes [ηc=1]0.962-stage gearboxes [ηc=1]
3-stage gearboxes [ηc=1]4-stage gearboxes [ηc=1]Notes
V00-en_GB-12/20136.8 - 8
GKR bevel gearboxesGeneral information
6.8
Functions and features
Lubricants
Lenze gearboxes and gearedmotors are ready for operation on deliv-ery and are filled with lubricants specific to both the drive and thedesign. The mounting position and design specified in the order arekey factors in choosing the volume of lubricant.
The lubricants listed in the lubricant table are approved for use inLenze drives.
Lubricant table
Mode
CLP HC 220CLP HC 320CLP 460USDA H1-20 … +40-25 … +500 … +40Ambient temperature [°C]
Synthetic-based oil (synthetic hydrocarbon / poly-alpha-olefin oil)Mineral based oil with additivesSpecificationFor food processing industryNote
16000 operating hours25000 operating hours16000 operating hoursChanging intervalnot later than after three years (oil
temperature 70...80 °C)not later than after three years (oil
temperature 70...80 °C)not later than after three years (oil
temperature 70...80 °C)bremer & leguilFuchs RenolinFuchs RenolinFuchs
Cassida Fluid GL 220Unisyn CLP 320CLP 460KlüberoilKlübersynthKlüberoilKlüber
4 UH1-220 NGEM4-320 NGEM1-460 NShell OmalaShell OmalaShellOil HD 320460
ƒ Please contact your Lenze office if you are operating at ambienttemperatures in areas up to < -20 °C > or up to +40°C.
6.8 - 9V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Functions and features
Surface and corrosion protection
Various surface coatings combined with other protective measuresensure that the geared motors operate reliably even at high air hu-
Foroptimumprotectionofgearedmotors against ambient conditions,the surface and corrosion protection system (OKS) offers tailor-madesolutions. midity, in outdoor installations or in the presence of atmospheric
impurities. Any colour from the RAL Classic collection can be chosenfor the top coat. The geared motors are also available unpainted (nosurface and corrosion protection).
MeasuresApplicationsSurface and corrosion protec-tion system
Catalogue textCatalogue text
OKS-G(primed)
•
•
1K priming coat (grey)
Dependent on subsequenttop coat applied
• Zinc-coated screws• Rust-free breather elementsOptional measures• Stainless steel nameplate
OKS-S(small)
••
Surface coating as per corrosivity category C1 (in line with EN 12944-2)Standard applications
• Internal installation inheatedbuildings
• Zinc-coated screws
••
Air humidity up to 90%Rust-free breather elements
Optional measures• Stainless steel nameplate
OKS-M(medium)
•
•
Surface coating as per corrosivity category C2 (in line with EN 12944-2)
Internal installation in non-heated buildings
•
•
Zinc-coated screws
Covered, protected externalinstallation
• Rust-free breather elementsOptional measures
• Air humidity up to 95%• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)
OKS-L(high)
•
•
Surface coating as per corrosivity category C3 (in line with EN 12944-2)
External installation• Air humidity above 95%
•
•
Blower cover and B end shield additionally primed
Chemical industry plants•
•
Food industry
Cable glands with gaskets• Corrosion-resistant brake with cover ring, stainless friction plate, andchrome-plated armature plate (on request)
• All screws/screw plugs zinc-coated• Stainless breather elements• Threaded holes that are not used are closed by means of plastic plugsOptional measures• Sealed recesses on motor (on request)• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)• Additional priming coat on cast iron fan• Oil expansion tank and torque plates painted separately and suppliedloose
V00-en_GB-12/20136.8 - 10
GKR bevel gearboxesGeneral information
6.8
Functions and features
Structure of surface coating
ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system
StructureDIN EN ISO 12944-2
Dipping primed gearboxWithout OKS(uncoated)
Dipping primed gearbox1K priming coat
OKS-G(primed)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-PUR top coat
C1OKS-S(small)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox1K priming coatC2
OKS-M(medium)
2K-PUR top coat
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-EP priming coatC3
OKS-L(high)
2K-PUR top coat
ƒ ThegearboxesGKR03 ... 06haveanaluminiumhousing, thereforeadippingprimer is dispensedwith in the case of these gearboxes.
6.8 - 11V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Functions and features
Ventilation
Gearboxes without ventilationNo ventilation is required for gearboxes GKR03 ... 05.
Gearboxes with ventilationGearbox GKR06 is supplied with a breather element as standard.
V00-en_GB-12/20136.8 - 12
GKR bevel gearboxesGeneral information
6.8
Dimensioning
General information about the data provided in this catalogue
Powers, torques and speedsThe powers, torques and speeds specified in this catalogue are roun-ded values and are valid under the following conditions:• Operating time/day = 8 h (100% OT)• Duty class I for up to 10 switching operations/h• Mounting positions and designs in this catalogue• Standard lubricant• Tamb = 20 °C for gearboxes,Tamb = 40 °C for motors (in accordance with EN 60034)
• Site altitude < = 1000 m amsl• The selection tables provide the permissible mechanical powersand torques. For notes on the thermal power limit, see chapterdrive dimensioning.
• The rated power specified for motors and geared motors appliesto operating mode S1 (in accordance with EN 60034).
Under different operating conditions, the values obtained may varyfrom those listed here.In the case of extreme operating conditions, please consult yourLenze sales office.
6.8 - 13V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Dimensioning
Thermal power limit
The thermal power limit is affected by:The thermal power limit, defined by the heat balance, limits the per-missible gearbox continuous power. It may be less than themechan-ical power ratings listed in the selection tables.
• the churning losses in the lubricant. These are determined by themounting position and the circumferential speed of the wheels
• the load and the speed• the ambient conditions: temperature, air circulation, input or dis-sipation via shafts and the foundation
Please consult your Lenze subsidiary• if the following input speeds n 1 are exceeded on a continuousbasis (continuous is defined as more than 8 h/day):
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min3000 r/min063 ... 100
1500 r/min3000 r/min112 ... 132
1500 r/min2000 r/min160 ... 225
• if the following input speeds n 1 are exceeded:
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min4000 r/min063 ... 100
2000 r/min4000 r/min112 ... 132
1500 r/min3000 r/min160 ... 225
Possible ways of extending the application area
• synthetic lubricant (option)• shaft sealing rings made from FP material/Viton (option)• reduction in lubricant quantity• cooling of the geared motor by means of air convection on themachine/system
V00-en_GB-12/20136.8 - 14
GKR bevel gearboxesGeneral information
6.8
Dimensioning
Load capacity and application factor
Application factor k (according to DIN 3990)Load capacity c of gearboxTakes into account the influence of temporally variable loads whichare actually present during the anticipated operating time of gear-boxes and geared motors.
Rated value for the load capacity of Lenze geared motors.• c is the ratio of the permissible rated torque of the gearbox to therated torque supplied by the drive component (e.g. the built-inLenze motor). k is determined by:
• The value of cmust always be greater than the value of the applic-ation factor k calculated for the application.
• the type of load• the load intensity• temporal influences
Load typeDuty class
Smooth operation, small or light joltsI
Uneven operation, average joltsII
Uneven operation, severe jolts and/or alternating loadIII
Application factor k
6.8 - 15V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Dimensioning
Torque derating at lowmotor frequencies
Motor size-dependent torque reduction, taking into account thethermal response during operation on the inverter.
Torque characteristics
A = Operation with integral fan and brakeB = Operation with integral fan and brake control "Holding currentreduction"
ƒ Themotor specifications stated in this catalogue for inverter op-eration apply to operationwith a Lenze inverter. If you are uncer-tain, get in touch with the manufacturer of the inverter to askwhether thedevice is capableof driving themotorwith the statedspecifications (e.g. setting range, base frequency).
You can use the Drive Solution Designer for precise drive dimension-ing.
The Drive Solution Designer helps you to carry out a fast and high-quality drive dimensioning.The software includes well-founded and proven knowledge on driveapplications and electro-mechanical drive components.
Please contact your Lenze sales office.
V00-en_GB-12/20136.8 - 16
GKR bevel gearboxesGeneral information
6.8
Dimensioning
Notes on the selection tables
The selection tables show the available combinations of gearboxtype, number of stages, ratio and motor. The following legend indic-ates the structure of the selection tables.
6.8 - 17V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Notes on ordering
Wewant to be sure that you receive the correct products in goodtime.
To allow us to achieve this we need:• your address and your company data• our product key for the individual products in this catalogue• your delivery date and delivery address
Ordering procedurePlease use the ordering information checklist to ensure that youprovide all the ordering information required for the various products.
Theordering information checklist, theproduct key, thebasic versions,options, mounting position and position of the system blocks will befound in the General – Product key section.
A list of Lenze's worldwide sales offices can be found on the Internet:www.Lenze.com.
V00-en_GB-12/20136.8 - 18
GKR bevel gearboxesGeneral information
6.8
Ordering details checklist
6.8 - 19V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Ordering details checklist
V00-en_GB-12/20136.8 - 20
GKR bevel gearboxesGeneral information
6.8
Ordering details checklist
Three-phase AC motors options
6.8 - 21V00-en_GB-12/2013
GKR bevel gearboxesGeneral information
6.8
Ordering details checklist
Three-phase AC motors options
V00-en_GB-12/20136.8 - 22
GKR bevel gearboxesGeneral information
6.8
Permissible radial and axial forces at output
Permissible axial forcePermissible radial forceFax,per = Fax,max if Frad = 0Frad,per = min(fw x fα x Frad,max ; fw x Frad,max at n2 ≤ 16 r/min)
If Frad and Fax ≠ 0; please contact Lenze.
Application of forces
Effective direction factor fα at output shaft
——— Direction of rotation L——— Direction of rotation R
6.8 - 23V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Permissible radial and axial forces at output
Additional load factor fw at output shaft
— ּ — Hollow shaft (H☐☐)——— Solid shaft (V☐☐)
GKR☐☐-2☐ H☐☐
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Hollow shaft
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
300030003000300030002800250022001200900GKR03
3600360036003600360033003000255022001000GKR04
7800780078007400620051004500380022501500GKR05
1000010000100009000700055005200500038003000GKR06
Max. axial force, Hollow shaft
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
14001400140014001400125011001000800600GKR03
180018001800180018001650150012751000700GKR04
3900390039003700310025002200190015001100GKR05
5000500050004500350027502600250020001500GKR06
ƒ Application of force Frad: at hollow shaft end face (x = 0)ƒ Fax,max only valid with Frad = 0ƒ Neither radial nor axial forces are permissible for thehollow shaft
with shrink disc (S☐☐).
V00-en_GB-12/20136.8 - 24
GKR bevel gearboxesTechnical data
6.8
Permissible radial and axial forces at output
GKR☐☐-2☐ V☐R
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Solid shaft without flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
300030003000300028002400210018001200900GKR03
3000300030003000300027002500210018001000GKR04
6500650065006000500045003600300023501500GKR05
9000900086007300560045004200400028002000GKR06
Max. axial force, Solid shaft without flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
14001400140014001400125011001000800600GKR03
180018001800180018001650150012751000700GKR04
3900390039003700310025002200190015201100GKR05
5000500050004500350027502600250020001500GKR06
GKR☐☐-2☐ V☐K
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Solid shaft with flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
300030003000300028002400210018001200900GKR03
3000300030003000300027002500210018001000GKR04
6500650065006500650065006000520036002400GKR05
9000900090009000900070006200550040003000GKR06
Max. axial force, Solid shaft with flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
14001400140014001400125011001000800600GKR03
180018001800180018001650150012751000700GKR04
3900390039003700310025002200190015001100GKR05
5000500050004500350027502600250020001500GKR06
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
6.8 - 25V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Output backlash in angular minutes
ƒ Backlash ϕ depending on ratio i
GKR03...06-2
V00-en_GB-12/20136.8 - 26
GKR bevel gearboxesTechnical data
6.8
Moments of inertia
GKR☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GKR04GearboxGKR03Gearbox0.307[kgcm²]J5.411 0.813[kgcm²]J5.185
0.723[kgcm²]J5.9630.276[kgcm²]J6.2220.196[kgcm²]J7.111 0.446[kgcm²]J7.111
0.410[kgcm²]J8.1780.178[kgcm²]J8.1780.134[kgcm²]J9.101 3.270[kgcm²]J9.101
0.300[kgcm²]J10.4660.123[kgcm²]J10.4660.086[kgcm²]J11.640 0.260[kgcm²]J11.449
1.990[kgcm²]J12.6980.079[kgcm²]J13.3860.059[kgcm²]J15.111 0.181[kgcm²]J14.603
1.470[kgcm²]J15.5560.055[kgcm²]J17.3780.038[kgcm²]J19.365 0.135[kgcm²]J17.889
0.096[kgcm²]J19.5560.054[kgcm²]J22.2700.025[kgcm²]J25.051 0.090[kgcm²]J22.489
0.065[kgcm²]J25.1850.023[kgcm²]J28.8080.016[kgcm²]J32.593 0.060[kgcm²]J28.963
0.042[kgcm²]J31.9190.015[kgcm²]J37.4810.010[kgcm²]J42.222 0.040[kgcm²]J36.707
0.029[kgcm²]J40.0000.009[kgcm²]J48.5560.006[kgcm²]J53.889 0.027[kgcm²]J46.000
0.017[kgcm²]J52.6980.006[kgcm²]J61.9720.017[kgcm²]J60.603
GKR06GearboxGKR05Gearbox4.950[kgcm²]J3.565 9.576[kgcm²]J3.431
5.607[kgcm²]J4.7062.793[kgcm²]J4.8891.791[kgcm²]J6.257 3.658[kgcm²]J6.022
5.112[kgcm²]J6.4812.572[kgcm²]J6.8832.316[kgcm²]J7.817 4.539[kgcm²]J7.146
3.233[kgcm²]J8.8891.531[kgcm²]J9.4401.396[kgcm²]J10.720 2.929[kgcm²]J9.800
2.209[kgcm²]J11.3761.021[kgcm²]J12.0810.874[kgcm²]J13.216 1.890[kgcm²]J12.444
1.734[kgcm²]J13.7200.938[kgcm²]J13.7190.805[kgcm²]J15.008 1.321[kgcm²]J15.873
1.225[kgcm²]J17.5000.597[kgcm²]J16.8570.554[kgcm²]J19.143 0.991[kgcm²]J19.444
0.928[kgcm²]J21.4380.439[kgcm²]J20.6500.411[kgcm²]J23.450 0.632[kgcm²]J25.309
0.594[kgcm²]J27.9030.270[kgcm²]J26.8780.253[kgcm²]J30.522 0.457[kgcm²]J31.481
0.432[kgcm²]J34.7080.191[kgcm²]J33.4330.180[kgcm²]J37.967 0.284[kgcm²]J40.741
0.270[kgcm²]J44.9170.118[kgcm²]J43.2670.112[kgcm²]J49.133 0.207[kgcm²]J49.444
0.197[kgcm²]J54.5130.085[kgcm²]J52.5100.081[kgcm²]J59.630 0.134[kgcm²]J62.500
0.127[kgcm²]J68.9060.054[kgcm²]J67.1130.051[kgcm²]J76.213
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.8 - 27V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Weights
GKR☐☐-2M HAR / HBR
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
7[kg]mGKR0316119[kg]mGKR04
3728211614[kg]mGKR05584537292422[kg]mGKR06
GKR☐☐-2M HAK
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
7[kg]mGKR03171210[kg]mGKR04
3829221715[kg]mGKR05594638302523[kg]mGKR06
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.8 - 28
GKR bevel gearboxesTechnical data
6.8
Weights
GKR☐☐-2M VAR / VBR
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
7[kg]mGKR03171210[kg]mGKR04
3829221715[kg]mGKR05604739302624[kg]mGKR06
GKR☐☐-2M VAK
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
8[kg]mGKR03171210[kg]mGKR04
3930231816[kg]mGKR05614840312725[kg]mGKR06
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.8 - 29V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Weights
GKR☐☐-2M SAR / SBR
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
7[kg]mGKR03171210[kg]mGKR04
3829211714[kg]mGKR05594638302523[kg]mGKR06
GKR☐☐-2M SAK
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
8[kg]mGKR03171210[kg]mGKR04
3930221815[kg]mGKR05604739312624[kg]mGKR06
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.8 - 30
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C329.1012.61310.0378-6616
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C329.1014.51310.0378-6616
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3210.4662.21512329-5714
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3210.4664.41512329-5714
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3211.4494.11713301-5213
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3211.6402.01713296-5212
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3212.6983.71814271-4711
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3213.2163.91915260-4511
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3213.3861.81915257-4511
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3214.6033.22116236-419.8
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3215.0083.92217229-409.6
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3215.1111.62217228-409.5
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3215.5563.02317221-399.2
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3217.3781.42519198-358.3
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3217.8892.62620192-348.0
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3219.3651.22821178-317.4
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3219.5562.42822176-317.3
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3222.2701.13224155-276.4
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3222.4892.13325153-276.4
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3225.0511.13628137-245.7
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3225.1852.13728137-245.7
42E84AV☐☐☐5514☐☐0GKR03-2M☐☐☐063C3228.8080.94232119-215.0
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3228.9631.84232119-215.0
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3230.5224.24434113-204.7
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3231.9191.74635108-194.5
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3236.7071.5534094-163.9
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3240.0001.2584486-153.6
42E84AV☐☐☐5514☐☐0GKR04-2M☐☐☐063C3246.0001.3675175-133.1
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3249.1333.2715470-122.9
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3252.5103.0765866-112.7
42E84AV☐☐☐5514☐☐0GKR06-2M☐☐☐063C3254.5133.5796063-112.6
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3259.6302.7876658-102.4
42E84AV☐☐☐5514☐☐0GKR06-2M☐☐☐063C3262.5002.8916955-9.62.3
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3267.1131.5977451-8.92.1
42E84AV☐☐☐5514☐☐0GKR06-2M☐☐☐063C3268.9062.81007650-8.72.1
42E84AV☐☐☐5514☐☐0GKR05-2M☐☐☐063C3276.2131.51118445-7.91.9
6.8 - 31V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐7514☐☐0GKR03-2M☐☐☐063C429.1011.91814374-6616
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C429.1013.31814374-6616
42E84AV☐☐☐7514☐☐0GKR03-2M☐☐☐063C4210.4661.62116325-5714
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4210.4663.22116325-5714
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4211.4493.02317297-5212
42E84AV☐☐☐7514☐☐0GKR03-2M☐☐☐063C4211.6401.52317292-5212
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4212.6982.72519268-4711
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4213.2162.92620257-4511
42E84AV☐☐☐7514☐☐0GKR03-2M☐☐☐063C4213.3861.32720254-4511
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4214.6032.32922233-419.7
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4215.0082.93023227-409.4
42E84AV☐☐☐7514☐☐0GKR03-2M☐☐☐063C4215.1111.13023225-409.4
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4215.5562.23123219-399.1
42E84AV☐☐☐7514☐☐0GKR03-2M☐☐☐063C4217.3781.03526196-358.2
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4217.8891.93627190-347.9
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4219.5561.83929174-317.2
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4222.4891.54534151-276.3
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4225.1851.55038135-245.6
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4226.8783.15440127-225.3
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4228.9631.35843117-214.9
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4230.5223.16146111-204.6
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4231.9191.26448107-194.4
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4233.4332.66750102-184.2
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4236.7071.1745593-163.9
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4237.9672.6765790-163.7
42E84AV☐☐☐7514☐☐0GKR06-2M☐☐☐063C4240.7412.9826184-153.5
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4243.2672.6876579-143.3
42E84AV☐☐☐7514☐☐0GKR06-2M☐☐☐063C4244.9172.9906776-133.2
42E84AV☐☐☐7514☐☐0GKR04-2M☐☐☐063C4246.0000.9926974-133.1
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4249.1332.3987469-122.9
42E84AV☐☐☐7514☐☐0GKR06-2M☐☐☐063C4249.4442.5997469-122.9
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4252.5102.21057965-112.7
42E84AV☐☐☐7514☐☐0GKR06-2M☐☐☐063C4254.5132.51098262-112.6
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4259.6301.91198957-102.4
42E84AV☐☐☐7514☐☐0GKR06-2M☐☐☐063C4262.5002.01259454-9.62.3
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4267.1131.113410151-8.92.1
42E84AV☐☐☐7514☐☐0GKR06-2M☐☐☐063C4268.9062.013810349-8.72.1
42E84AV☐☐☐7514☐☐0GKR05-2M☐☐☐063C4276.2131.115311445-7.91.9
V00-en_GB-12/20136.8 - 32
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C326.2574.21814558-9623
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C329.1012.42620384-6616
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3210.4662.23023334-5714
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3211.4492.13325305-5213
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3212.6981.93628275-4712
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3213.2164.23829264-4511
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3214.6031.64232239-4110
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3215.0083.94333233-409.7
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3215.5561.54534224-399.4
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3217.8891.35139195-348.1
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3219.5561.25643179-317.4
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3220.6503.15945169-297.0
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3222.4891.16449155-276.5
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3223.4502.76752149-266.2
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3225.1851.17255139-245.8
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3226.8782.77759130-225.4
42E84AV☐☐☐1124☐☐0GKR04-2M☐☐☐071C3228.9630.98364121-215.0
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3230.5222.48767114-204.8
42E84AV☐☐☐1124☐☐0GKR06-2M☐☐☐071C3231.4813.49069111-194.6
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3233.4332.29673104-184.4
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3237.9671.91098392-163.8
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3243.2671.81249581-143.4
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3249.1331.614110871-123.0
42E84AV☐☐☐1124☐☐0GKR06-2M☐☐☐071C3249.4442.814110971-122.9
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3252.5101.515011567-112.8
42E84AV☐☐☐1124☐☐0GKR06-2M☐☐☐071C3254.5132.715612064-112.7
42E84AV☐☐☐1124☐☐0GKR05-2M☐☐☐071C3259.6301.317113159-102.4
42E84AV☐☐☐1124☐☐0GKR06-2M☐☐☐071C3262.5001.617913756-9.62.3
42E84AV☐☐☐1124☐☐0GKR06-2M☐☐☐071C3268.9061.619715151-8.72.1
6.8 - 33V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C426.2573.12519551-9623
42E84AV☐☐☐1524☐☐0GKR04-2M☐☐☐071C429.1011.83627379-6616
42E84AV☐☐☐1524☐☐0GKR04-2M☐☐☐071C4210.4661.64131330-5714
42E84AV☐☐☐1524☐☐0GKR04-2M☐☐☐071C4211.4491.54534301-5213
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4212.0813.14836286-5012
42E84AV☐☐☐1524☐☐0GKR04-2M☐☐☐071C4212.6981.45038272-4711
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4213.2163.15240261-4511
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4213.7193.05441252-4411
42E84AV☐☐☐1524☐☐0GKR04-2M☐☐☐071C4214.6031.25844236-419.8
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4215.0082.95945230-409.6
42E84AV☐☐☐1524☐☐0GKR04-2M☐☐☐071C4215.5561.16147222-399.2
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4215.8733.16348217-389.1
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4216.8572.76751205-368.5
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4217.5003.16952197-348.2
42E84AV☐☐☐1524☐☐0GKR04-2M☐☐☐071C4217.8891.07154193-348.0
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4219.1432.47657180-317.5
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4220.6502.28262167-297.0
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4223.4502.09370147-266.1
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4225.3092.910076136-245.7
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4226.8781.910681128-225.4
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4227.9032.911084124-225.2
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4230.5221.712091113-204.7
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4231.4812.412494110-194.6
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4233.4331.6132100103-184.3
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4234.7082.413710499-174.1
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4237.9671.415011491-163.8
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4240.7412.516112285-153.5
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4243.2671.317113080-143.3
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4244.9172.417713577-133.2
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4249.1331.219414770-122.9
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4249.4442.019514870-122.9
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4252.5101.120715766-112.7
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4254.5132.021516363-112.6
42E84AV☐☐☐1524☐☐0GKR05-2M☐☐☐071C4259.6301.023517958-102.4
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4262.5001.224718755-9.62.3
42E84AV☐☐☐1524☐☐0GKR06-2M☐☐☐071C4268.9061.227220650-8.72.1
V00-en_GB-12/20136.8 - 34
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C326.2573.33627559-9623
42E84AV☐☐☐2224☐☐0GKR04-2M☐☐☐080C329.1011.25239385-6616
42E84AV☐☐☐2224☐☐0GKR04-2M☐☐☐080C3210.4661.16045334-5714
42E84AV☐☐☐2224☐☐0GKR04-2M☐☐☐080C3211.4491.06549306-5213
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3212.0812.36952290-5012
42E84AV☐☐☐2224☐☐0GKR04-2M☐☐☐080C3212.6980.97254276-4712
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3213.2162.17557265-4511
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3213.7192.17859255-4411
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3215.0082.08664233-409.7
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3216.8571.99672208-368.7
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3219.1431.710982183-317.6
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3219.4443.111183180-317.5
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3220.6501.511888170-297.1
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3221.4382.812292163-286.8
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3223.4501.4134100149-266.2
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3225.3092.7144108138-245.8
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3226.8781.3153115130-225.4
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3227.9032.4159119125-225.2
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3230.5221.2174131115-204.8
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3231.4812.1180135111-194.6
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3233.4331.1191143105-184.4
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3234.7081.9198148101-174.2
42E84AV☐☐☐2224☐☐0GKR05-2M☐☐☐080C3237.9670.921716292-163.8
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3240.7411.823217486-153.6
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3244.9171.725619278-133.3
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3249.4441.528221171-123.0
42E84AV☐☐☐2224☐☐0GKR06-2M☐☐☐080C3254.5131.431123364-112.7
6.8 - 35V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C426.0223.14735578-14924
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C426.2572.44937556-14423
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4211.3763.18967306-7913
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4212.0811.79571288-7512
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4212.4443.19773280-7212
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4213.2161.610378263-6811
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4213.7191.510781254-6611
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4213.7203.010781254-6611
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4215.0081.411788232-609.7
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4215.8732.712493219-579.1
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4216.8571.413299206-538.6
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4217.5002.5137103199-518.3
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4219.1431.2150112182-477.6
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4219.4442.2152114179-467.5
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4220.6501.1162121169-447.0
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4221.4382.0168126162-426.8
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4223.4501.0183138148-386.2
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4225.3092.0198149138-365.7
42E84AV☐☐☐3024☐☐0GKR05-2M☐☐☐080C4226.8781.0210158130-345.4
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4227.9031.8218164125-325.2
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4231.4811.6246185111-294.6
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4234.7081.4272204100-264.2
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4240.7411.331923985-223.6
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4244.9171.235126478-203.2
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4249.4441.138729070-182.9
42E84AV☐☐☐3024☐☐0GKR06-2M☐☐☐080C4254.5131.042632064-172.7
V00-en_GB-12/20136.8 - 36
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C326.0222.96344578-10024
42E84AV☐☐☐4024☐☐0GKR05-2M☐☐☐090C326.2571.86546556-9623
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3211.3762.811983306-5313
42E84AV☐☐☐4024☐☐0GKR05-2M☐☐☐090C3212.0811.212688288-5012
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3212.4442.613091280-4812
42E84AV☐☐☐4024☐☐0GKR05-2M☐☐☐090C3213.2161.213897263-4511
42E84AV☐☐☐4024☐☐0GKR05-2M☐☐☐090C3213.7191.1143100254-4411
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3213.7202.3143100254-4411
42E84AV☐☐☐4024☐☐0GKR05-2M☐☐☐090C3215.0081.1157110232-409.7
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3215.8732.1166116219-389.1
42E84AV☐☐☐4024☐☐0GKR05-2M☐☐☐090C3216.8571.0176123206-368.6
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3217.5001.9183128199-348.3
42E84AV☐☐☐4024☐☐0GKR05-2M☐☐☐090C3219.1430.9200140182-317.6
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3219.4441.7203142179-317.5
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3221.4381.5224157162-286.8
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3225.3091.5264185138-245.7
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3227.9031.3291204125-225.2
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3231.4811.2328230111-194.6
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3234.7081.1362253100-174.2
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3240.7411.042529785-153.6
42E84AV☐☐☐4024☐☐0GKR06-2M☐☐☐090C3244.9170.946832878-133.2
6.8 - 37V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C126.0222.58560585-10024
42E84AV☐☐☐5524☐☐0GKR05-2M☐☐☐100C126.2571.38962563-9624
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1211.3762.0161113310-5313
42E84AV☐☐☐5524☐☐0GKR05-2M☐☐☐100C1212.0810.9171120292-5012
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1212.4441.9176123283-4812
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1213.7201.7194136257-4411
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1215.8731.5225157222-389.3
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1217.5001.4248173201-348.4
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1219.4441.2275193181-317.6
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1221.4381.1304212164-286.9
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1225.3091.1358251139-245.8
42E84AV☐☐☐5524☐☐0GKR06-2M☐☐☐100C1227.9031.0395277126-225.3
V00-en_GB-12/20136.8 - 38
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐7524☐☐0GKR06-2M☐☐☐100C326.0221.811782584-10024
42E84AV☐☐☐7524☐☐0GKR05-2M☐☐☐100C326.2571.012185562-9623
42E84AV☐☐☐7524☐☐0GKR06-2M☐☐☐100C3211.3761.5220154309-5313
42E84AV☐☐☐7524☐☐0GKR06-2M☐☐☐100C3212.4441.4241169283-4812
42E84AV☐☐☐7524☐☐0GKR06-2M☐☐☐100C3213.7201.2266186256-4411
42E84AV☐☐☐7524☐☐0GKR06-2M☐☐☐100C3215.8731.1307215221-389.2
42E84AV☐☐☐7524☐☐0GKR06-2M☐☐☐100C3217.5001.0339237201-348.4
42E84AV☐☐☐7524☐☐0GKR06-2M☐☐☐100C3219.4440.9376264181-317.5
6.8 - 39V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
42E84AV☐☐☐1134☐☐0GKR06-2M☐☐☐112C226.0221.2170109586-10024
42E84AV☐☐☐1134☐☐0GKR06-2M☐☐☐112C2211.3761.0322206310-5313
42E84AV☐☐☐1134☐☐0GKR06-2M☐☐☐112C2212.4441.0352225284-4812
V00-en_GB-12/20136.8 - 40
GKR bevel gearboxesTechnical data
6.8
6.8 - 41V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Dimensions
GKR☐☐-2M H☐R
V00-en_GB-12/20136.8 - 42
GKR bevel gearboxesTechnical data
6.8
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
218194176156139123g176166157150109100MFEMAXX
g1 158147137132118107MFEMABR319324274224.5207187MFEMAXXk1222180145120k2907668735240MFEMABR
Δ k 102109128MFFMAXX183170181183165170MFFMABR
k332GKR03
425403383GKR04588538479456436GKR05
641640590530508488GKR06
s6p1p1)oha8a7a
254811714250396629GKR03
256315118963658836GKR04
82181250.58040GKR05
10022630710051GKR06
s1f1e1b1a1i1t3)ul2l1l1)d1d2)
J7+0,2JS9H7
M6x122.57055852.52.5
20.822.8
66
2222
8585
100100
3030
1820
GKR03
M8x16388621042.52.5
22.827
68
2525
105105
120120
3035
2025
GKR04
M8x1541008011644
33.338.3
810
2525
127127
143143
5050
3035
GKR05
M10x22412010014055
43.348.8
1214
3030
150150
170170
6565
4045
GKR06
s5nmf5e5c5b7b5
6.62022809077560GKR03
925289510589070GKR04
9482713811511100100GKR05
11533216414512125120GKR06
k2 !1)
l2 !2)
d = 25 mm > DIN 6885/33)
6.8 - 43V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Dimensions
GKR☐☐-2M HAK
V00-en_GB-12/20136.8 - 44
GKR bevel gearboxesTechnical data
6.8
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
218194176156139123g176166157150109100MFEMAXX
g1 158147137132118107MFEMABR319324274224.5207187MFEMAXXk1222180145120k2907668735240MFEMABR
Δ k 102109128MFFMAXX183170181183165170MFFMABR
k332GKR03
425403383GKR04588538479456436GKR05
641640590530508488GKR06
qp1p1)ok8ha
8048117142355029GKR03
8063151189286336GKR04
10582181250.547.58040GKR05
126.51002263075410051GKR06
s2fa2f2e2c2ba2b2a2o11)i2t3)ul2l1ld1d2)
H7j7+0,2JS9H7
79
-4
3-
10087
88
-60
80-
120110
130130
3030
20.822.8
66
2222
8585
100100
3030
1820
GKR03
79
33.5
100130
88
80110
120160
140140
2020
22.827
68
2525
105105
120120
3035
2025
GKR04
911
3.53.5
130165
1212
110130
160200
176.5176.5
33.533.5
33.338.3
810
2525
127127
143143
5050
3035
GKR05
1114
3.54
165215
1212
130180
200250
211.5211.5
41.541.5
43.348.8
1214
3030
150150
170170
6565
4045
GKR06
k2 !1)
l2 !2)
d = 25 mm > DIN 6885/33)
6.8 - 45V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Dimensions
GKR☐☐-2M V☐R
V00-en_GB-12/20136.8 - 46
GKR bevel gearboxesTechnical data
6.8
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
218194176156139123g176166157150109100MFEMAXX
g1 158147137132118107MFEMABR319324274224.5207187MFEMAXXk1222180145120k2907668735240MFEMABR
Δ k 102109128MFFMAXX183170181183165170MFFMABR
k332GKR03
425403383GKR04588538479456436GKR05
641640590530508488GKR06
s6qp1p1)oha8a7a
25904811714250396629GKR03
251006315118963658836GKR04
131.582181250.58040GKR05
15510022630710051GKR06
s1f1e1b1a1o11)i1tul2l1ld2d1d
J7k6
M6x122.5705585137.542.522.5628540M63020GKR03
M8x163886210415842.522.5628540M63020GKR04
M8x154100801161996433845660M105030GKR05
M10x22412010014023575381056770M126535GKR06
s5nmf5e5c5b7b5
6.62022809077560GKR03
925289510589070GKR04
9482713811511100100GKR05
11533216414512125120GKR06
k2 !1)
6.8 - 47V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
Dimensions
GKR☐☐-2M VAK
V00-en_GB-12/20136.8 - 48
GKR bevel gearboxesTechnical data
6.8
112C22100C12090C32080C42080C32071C32063C32100C32071C42063C42
218194176156139123g176166157150109100MFEMAXX
g1 158147137132118107MFEMABR319324274224.5207187MFEMAXXk1222180145120k2907668735240MFEMABR
Δ k 102109128MFFMAXX183170181183165170MFFMABR
k332GKR03
425403383GKR04588538479456436GKR05
641640590530508488GKR06
qp1p1)ok8ha
8048117142355029GKR03
80.563151189286336GKR04
10582181250.547.58040GKR05
126.51002263075410051GKR06
s2fa2f2e2c2ba2b2a2o11)i2tul2l1ld2d
H7j7k6
79
-4
3-
10087
88
-60
80-
120110
167.54022.5628540M620GKR03
79
33.5
100130
88
80110
120160
1784022.5628540M620GKR04
911
3.53.5
130165
1212
110130
160200
232.56033845660M1030GKR05
1114
3.54
165215
1212
130180
200250
276.570381056770M1235GKR06
k2 !1)
6.8 - 49V00-en_GB-12/2013
GKR bevel gearboxesTechnical data
6.8
V00-en_GB-12/20136.8 - 50
GKR bevel gearboxesTechnical data
6.8
Hollow shaft with shrink disc
l4l1lk11k10k9i1g4g3g2d 1)
h6
20100120138124126
2.554655020GKR03
120144158144146GKR04
281511711821771764.08490803035
GKR05
301742042142102025.0941009040GKR06
Machine shaft design.1)
ƒ Output flange and hollow shaft with shrink disc (output versionSAK) are not possible in the same location. For additional dimen-sions see output version H☐☐.
ƒ Ensure that the strength of the machine shaft material is ad-equate in shrink disc designs.When using typical steels, e.g. C45, 42CrMo4, the torques listedin the selection tables can be used without restriction.Please consult us if you wish to use material that is considerablyweaker. Medium surface roughness Rz must not exceed 15 µm(turning is sufficient).
6.8 - 51V00-en_GB-12/2013
GKR bevel gearboxesAccessories
6.8
Mounting set for hollow shaft circlip:Proposed design for auxiliary tools
c7l9d2l1d
H7
4
40
M685
1820
GKR03
1052025
GKR045
M106
1273035
GKR05750M12
860M16150
4045
GKR069
V00-en_GB-12/20136.8 - 52
GKR bevel gearboxesAccessories
6.8
Hoseproof hollow shaft cover
ƒ Cover including gasket
k11[mm]
9GKR03
GKR04
10GKR05
11GKR06
Gearboxes with 2nd output shaft end
o1i1ld
k6
[mm][mm][mm][mm]
18042.54020
GKR03
200GKR04
26364.06030GKR05
31075.07035GKR06
6.8 - 53V00-en_GB-12/2013
GKR bevel gearboxesAccessories
6.8
Rubber buffer for torque plate
a8a7cDd
3966.013.02510
GKR03
6588.0GKR04
V00-en_GB-12/20136.8 - 54
GKR bevel gearboxesAccessories
6.8
Torque plate on threaded pitch circle
In position 3
In position 5
p9p8k6Dda9a8a4
4211592088.010012GKR03
541281125109.011013GKR04
6.8 - 55V00-en_GB-12/2013
GKR bevel gearboxesAccessories
6.8
Torque plate on threaded pitch circle
In position 3
In position 5
k6Ddb4a9a8a7a4
15451638.527.516023.534GKR05
18502044.533.020028.040GKR06
V00-en_GB-12/20136.8 - 56
GKR bevel gearboxesAccessories
6.8
Torque plate at housing foot
In position 4 or 6
k7e5Ddcb8a8a7a4
25127401315.07011536.545GKR05
30145501727.08014545.072GKR06
6.8 - 57V00-en_GB-12/2013
GKR bevel gearboxesAccessories
6.8
Ventilation position
GKR06
⊗ Ventilation
V00-en_GB-12/20136.8 - 58
GKR bevel gearboxesAccessories
6.8
6.8 - 59V00-en_GB-12/2013
GKR bevel gearboxesAccessories
6.8
V00-en_GB-12/20136.8 - 60
GKR bevel gearboxesAccessories
6.8
GKS helical-bevelgearboxes0.55 to 22 kW
Gearboxes
6.9 - 4List of abbreviationsGeneral information
6.9 - 5Product key
6.9 - 7Product information
6.9 - 8Functions and features
6.9 - 13Dimensioning
6.9 - 18Notes on ordering
6.9 - 19Ordering details checklist
6.9 - 23Permissible radial and axial forces at outputTechnical data
6.9 - 27Output backlash in angular minutes
6.9 - 28Moments of inertia
6.9 - 35Weights
6.9 - 41Selection tables
6.9 - 66Dimensions
6.9 - 83Hollow shaft with shrink discAccessories
6.9 - 84Mounting set for hollow shaft circlip: Proposed design forauxiliary tools
6.9 - 85Hoseproof hollow shaft cover
6.9 - 86Gearboxes with 2nd output shaft end
6.9 - 87Torque plate on threaded pitch circle
6.9 - 88Torque plate at housing foot
6.9 - 89Ventilations
GKS helical-bevel gearboxesContents
6.9
List of abbreviations
Communauté EuropéenneCEEfficiencyηc=1Canadian Standards AssociationCSALoad capacitycDeutsches Institut für Normung e.V.DINRated frequency[Hz]fNElectromagnetic compatibilityEMCMax. axial force[N]Fax,maxEuropean standardENMax. radial force[N]Frad,maxInternational Electrotechnical CommissionIECSite altitude[m]HmaxInternational Mounting CodeIMRatioiInternational Protection CodeIPMoment of inertia[kgcm²]JNational Electrical Manufacturers AssociationNEMAMass[kg]mUnderwriters Laboratory Listed ProductULOutput torque[Nm]M2Underwriters Laboratory Recognized ProductUROutput speed[r/min]n2Verband deutscher Elektrotechniker (Associationof German Electrical Engineers)
VDERated speed[r/min]nNRated power[kW]PN
China Compulsory CertificateCCCTransition operating frequency[1/h]ShüCertificate for Russian FederationGOSTMax. ambient operating temperature[°C]Topr,maxCombined certification marks of UL for the USAand Canada
cURusMin. ambient operating temperature[°C]Topr,minRated voltage[V]UN, Δ
Certificate for UkraineUkrSEPRORated voltage[V]UN, Y
Lenze | V02-en_GB-03/20146.9 - 4
GKS helical-bevel gearboxesGeneral information
6.9
Product key
6.9 - 5Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Product key
Mounting position (A to F) and position of system blocks (1 to 6)
Without flange: 0Hollow shaft: 0Flange: 3, 5, 8 (3+5)Solid shaft: 3, 5, 8 (3+5)Terminal box / motec: 2, 3, 4, 5Hollow shaft with shrink disc: 3, 5
Gearbox designs
OptionsBasic versions
Standard efficiencyMotor efficiency OKS-S (special paint according to RAL)Surface and corrosionprotection OKS-M (special paint according to RAL)Increased efficiency (IE2)
OKS-L (special paint according to RAL)OKS-G (primer: grey)OKS-S (paint: RAL 7012)
Surface and corrosionprotection CLP HC 320 (synthetic)
CLP HC 220 USDA H1 (synthetic)Lubricant
CLP 460 (mineral)LubricantDriven shaft: VitonShaft sealing ringsOil control plugs for GKS05 to 14VentilationBreather elements for GKS05VentilationBreather elements for GKS06 … 14Compensation reservoir for GKS09 to 14-3 in mounting position C
Torque plate on threaded pitch circleAccessoriesHousing foot torque plate2nd output shaft endShrink disc coverHoseproof hollow shaft coverMounting set for hollow shaft circlip
Metal nameplate (supplied loose)NameplateAdhesive nameplate (supplied loose)
Lenze | V02-en_GB-03/20146.9 - 6
GKS helical-bevel gearboxesGeneral information
6.9
Product information
DesignsLenze provides a geared motor construction kit, which covers a widerangeof requirements. Numerous drive-side andoutput-side optionsenable precise adaptationof thedrive to the specific application. This • 3-stage and 4-stage gearboxesis the basis for versatile applications and functional scalability of ourgearboxes and geared motors.
• Hollow shaft with keyway or shrink disc• Solid shaft with keyway
The modular concept and high power density make extremely com-pact sizespossible.Optimised teethprofiles andgroundgears ensure
• Foot or flange mounting• Torque plate, including rubber buffer
low-noise operation and lowbacklash. The gearboxes are of compactand hence space-saving construction.
• With MF three-phase AC motors (inverter-optimised)power range 0.55 … 22 kW
For maximum precision
Helical-bevel gearboxeshave themajor benefit of enabling extremelyprecise and reproducible positioningmovements owing to their hightorsional stiffness and lowbacklash. Our helical-bevel gearboxes canbe combined with three-phase AC motors and servo motors to forma compact unit. They are available in 3- and 4-stage versions with atorque of up to 11,639 Nm and a ratio of up to i=1,936.
Inverters for motor-proximity installation
The Drive Package with decentralised Inverter Drives 8400 moteccovers a power range up to 7.5 kW.
Helical-bevel geared motor GKS07-3M HBR 100-32
6.9 - 7Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Functions and features
Gearbox type
GKSHousing
CuboidDesign
Aluminium / cast ironMaterialSolid shaft
with keyway to DIN 6885Design
k6 (d ≤ 50 mm)Tolerancem6 (d > 50 mm)
Tempered steel C45 or 42CrMo4MaterialHollow shaft
H: with keywayDesignS: smooth
Bore H7Tolerance
Tempered steel C45MaterialToothed part
Ground tooth flanksDesignOptimised tooth flank geometry
Case-hardened steelMaterialShaft-hub joint
1st stage/prestage/helical (bevel) gearbox: Friction-type connectionOutput stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection
Shaft sealing rings
With dust lipDesign
NB / FPMaterialBearing
Ball bearing / tapered-roller bearing depending on size and designDesignSchmierstoffe
DIN 51502Standard
corresponding to mounting position (see operating instructions)QuantitiesMechanical efficiency
1-stage gearboxes [ηc=1]2-stage gearboxes [ηc=1]
0.953-stage gearboxes [ηc=1]0.934-stage gearboxes [ηc=1]
Notes
Lenze | V02-en_GB-03/20146.9 - 8
GKS helical-bevel gearboxesGeneral information
6.9
Functions and features
Lubricants
Lenze gearboxes and gearedmotors are ready for operation on deliv-ery and are filled with lubricants specific to both the drive and thedesign. The mounting position and design specified in the order arekey factors in choosing the volume of lubricant.
The lubricants listed in the lubricant table are approved for use inLenze drives.
Lubricant table
Mode
CLP HC 220CLP HC 320CLP 460USDA H1-20 … +40-25 … +500 … +40Ambient temperature [°C]
Synthetic-based oil (synthetic hydrocarbon / poly-alpha-olefin oil)Mineral based oil with additivesSpecificationFor food processing industryNote
16000 operating hours25000 operating hours16000 operating hoursChanging intervalnot later than after three years (oil
temperature 70 to 80 °C)not later than after three years (oil
temperature 70 to 80 °C)not later than after three years (oil
temperature 70 to 80 °C)bremer & leguilFuchs RenolinFuchs RenolinFuchs
Cassida Fluid GL 220Unisyn CLP 320CLP 460KlüberoilKlübersynthKlüberoilKlüber
4 UH1-220 NGEM4-320 NGEM1-460 NShell OmalaShell OmalaShellS4 GX HD 320S2 G 460
ƒ Please contact your Lenze sales office if you are operating atambient temperatures in areas up to< -20 °C bzw. > or up to+40°C.
6.9 - 9Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Functions and features
Surface and corrosion protection
Various surface coatings combined with other protective measuresensure that the geared motors operate reliably even at high air hu-
Foroptimumprotectionofgearedmotors against ambient conditions,the surface and corrosion protection system (OKS) offers tailor-madesolutions. midity, in outdoor installations or in the presence of atmospheric
impurities. Any colour from the RAL Classic collection can be chosenfor the top coat. The geared motors are also available unpainted (nosurface and corrosion protection).
MeasuresApplicationsSurface and corrosion protec-tion system
Catalogue textCatalogue text
OKS-G(primed)
•
•
2K PUR priming coat (grey)
Dependent on subsequenttop coat applied
• Zinc-coated screws• Rust-free breather elementsOptional measures• Stainless steel nameplate
OKS-S(small)
••
Surface coating as per corrosivity category C1 (in line with EN 12944-2)Standard applications
• Internal installation inheatedbuildings
• Zinc-coated screws
••
Air humidity up to 90%Rust-free breather elements
Optional measures• Stainless steel nameplate
OKS-M(medium)
•
•
Surface coating as per corrosivity category C2 (in line with EN 12944-2)
Internal installation in non-heated buildings
•
•
Zinc-coated screws
Covered, protected externalinstallation
• Rust-free breather elementsOptional measures
• Air humidity up to 95%• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)
OKS-L(high)
•
•
Surface coating as per corrosivity category C3 (in line with EN 12944-2)
External installation• Air humidity above 95%
•
•
Blower cover and B end shield additionally primed
Chemical industry plants•
•
Food industry
Cable glands with gaskets• Corrosion-resistant brake with cover ring, stainless friction plate, andchrome-plated armature plate (on request)
• All screws/screw plugs zinc-coated• Stainless breather elements• Threaded holes that are not used are closed by means of plastic plugsOptional measures• Sealed recesses on motor (on request)• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)• Additional priming coat on cast iron fan• Oil expansion tank and torque plates painted separately and suppliedloose
Lenze | V02-en_GB-03/20146.9 - 10
GKS helical-bevel gearboxesGeneral information
6.9
Functions and features
Structure of surface coating
ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system
StructureDIN EN ISO 12944-2
Dipping primed gearboxWithout OKS(uncoated)
Dipping primed gearbox2K PUR priming coat
OKS-G(primed)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-PUR top coat
C1OKS-S(small)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K PUR priming coatC2
OKS-M(medium)
2K-PUR top coat
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K PUR priming coatC3
OKS-L(high)
2K-PUR top coat
6.9 - 11Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Functions and features
Ventilation
Non-ventilated gearboxesNo ventilation is required for gearbox GKS04.
Gearboxes that may optionally be equipped with ventilationSpecial measures are not usually required when using the GST05gearbox. In borderline cases, e.g. at input speeds > 2000 rpm, we re-commend the use of breather elements, which we can supply if re-quired.
Ventilated gearboxesGearboxes GKS06 to 14 are supplied with breather elements asstandard.
Special measures for mounting position C (motor on top)We recommend that an oil compensation reservoir is always usedwith gearbox sizes G☐☐09 to 14 in this mounting position. Thisreservoir can be purchased as an option. For illustrations and meas-ures, please refer to the Accessories chapter.
This is not required at higher ratios or low input speeds. Please contactLenze for confirmation in this case.
Lenze | V02-en_GB-03/20146.9 - 12
GKS helical-bevel gearboxesGeneral information
6.9
Dimensioning
General information about the data provided in this catalogue
Powers, torques and speedsThe powers, torques and speeds specified in this catalogue are roun-ded values and are valid under the following conditions:• Operating time/day = 8 h (100% OT)• Duty class I for up to 10 switching operations/h• Mounting positions and designs in this catalogue• Standard lubricant• Tamb = 20 °C for gearboxes,Tamb = 40 °C for motors (in accordance with EN 60034)
• Site altitude < = 1000 m amsl• The selection tables provide the permissible mechanical powersand torques. For notes on the thermal power limit, see chapterdrive dimensioning.
• The rated power specified for motors and geared motors appliesto operating mode S1 (in accordance with EN 60034).
Under different operating conditions, the values obtained may varyfrom those listed here.In the case of extreme operating conditions, please consult yourLenze sales office.
6.9 - 13Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Dimensioning
Thermal power limit
The thermal power limit is affected by:The thermal power limit, defined by the heat balance, limits the per-missible gearbox continuous power. It may be less than themechan-ical power ratings listed in the selection tables.
• the churning losses in the lubricant. These are determined by themounting position and the circumferential speed of the wheels
• the load and the speed• the ambient conditions: temperature, air circulation, input or dis-sipation via shafts and the foundation
Please consult your Lenze sales office• if the following input speeds n 1 are exceeded on a continuousbasis (continuous is defined as more than 8 h/day):
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min3000 r/min063 ... 100
1500 r/min3000 r/min112 ... 132
1500 r/min2000 r/min160 ... 225
• if the following input speeds n 1 are exceeded:
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min4000 r/min063 ... 100
2000 r/min4000 r/min112 ... 132
1500 r/min3000 r/min160 ... 225
• or if you are using the following gearbox type, size and ratio com-binations at an input speed of n 1 > 1500 r/min:
Ratio iGearbox sizeGearbox type
≤ 2507, 09, 11, 14GKS helical-bevel gearbox
Possible ways of extending the application area
• synthetic lubricant (option)• shaft sealing rings made from FP material/Viton (option)• reduction in lubricant quantity• cooling of the geared motor by means of air convection on themachine/system
Lenze | V02-en_GB-03/20146.9 - 14
GKS helical-bevel gearboxesGeneral information
6.9
Dimensioning
Load capacity and application factor
Application factor k (according to DIN 3990)Load capacity c of gearboxTakes into account the influence of temporally variable loads whichare actually present during the anticipated operating time of gear-boxes and geared motors.
Rated value for the load capacity of Lenze geared motors.• c is the ratio of the permissible rated torque of the gearbox to therated torque supplied by the drive component (e.g. the built-inLenze motor). k is determined by:
• The value of cmust always be greater than the value of the applic-ation factor k calculated for the application.
• the type of load• the load intensity• temporal influences
Load typeDuty class
Smooth operation, small or light joltsI
Uneven operation, average joltsII
Uneven operation, severe jolts and/or alternating loadIII
Application factor k
6.9 - 15Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Dimensioning
Torque derating at lowmotor frequencies
Motor size-dependent torque reduction, taking into account thethermal response during operation on the inverter.
Torque characteristics
A = Operation with integral fan and brakeB = Operation with integral fan and brake control "Holding currentreduction"
ƒ Themotor specifications stated in this catalogue for inverter op-eration apply to operationwith a Lenze inverter. If you are uncer-tain, get in touch with the manufacturer of the inverter to askwhether thedevice is capableof driving themotorwith the statedspecifications (e.g. setting range, base frequency).
You can use the Drive Solution Designer for precise drive dimension-ing.
The Drive Solution Designer helps you to carry out a fast and high-quality drive dimensioning.The software includes well-founded and proven knowledge on driveapplications and electro-mechanical drive components.
Please contact your Lenze sales office.
Lenze | V02-en_GB-03/20146.9 - 16
GKS helical-bevel gearboxesGeneral information
6.9
Dimensioning
Notes on the selection tables
The selection tables show the available combinations of gearboxtype, number of stages, ratio andmotor. They are usedonly to providebasic orientation.The following legend indicates the structure of the selection tables.
6.9 - 17Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Notes on ordering
Wewant to be sure that you receive the correct products in goodtime.
To allow us to achieve this we need:• your address and your company data• our product key for the individual products in this catalogue• your delivery date and delivery address
Ordering procedurePlease use the ordering information checklist to ensure that youprovide all the ordering information required for the various products.
Theordering information checklist, theproduct key, thebasic versions,options, mounting position and position of the system blocks will befound in the General – Product key section.
A list of Lenze's worldwide sales offices can be found on the Internet:www.Lenze.com.
Lenze | V02-en_GB-03/20146.9 - 18
GKS helical-bevel gearboxesGeneral information
6.9
Ordering details checklist
6.9 - 19Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Ordering details checklist
Lenze | V02-en_GB-03/20146.9 - 20
GKS helical-bevel gearboxesGeneral information
6.9
Ordering details checklist
Three-phase AC motors options
6.9 - 21Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesGeneral information
6.9
Ordering details checklist
Three-phase AC motors options
Lenze | V02-en_GB-03/20146.9 - 22
GKS helical-bevel gearboxesGeneral information
6.9
Permissible radial and axial forces at output
Permissible axial forcePermissible radial forceFax,per = Fax,max if Frad = 0Frad,per = min(fw x fα x Frad,max ; fw x Frad,max at n2 ≤ 16 r/min)
If Frad and Fax ≠ 0, please contact your Lenze sales office.
Application of forces
Effective direction factor fα at output shaft
——— Direction of rotation R——— Direction of rotation L
6.9 - 23Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Permissible radial and axial forces at output
Additional load factor fw at output shaft
— ּ — Hollow shaft (H☐☐)——— Solid shaft (V☐☐)——— Solid shaft with flange (V☐K)
GKS☐☐-3/4☐ H☐☐
n2 [r/min]Size
≤16254063100160250400630Gearbox
Max. radial force, Hollow shaft
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N]
700070007000680059005100450039003100GKS04
730073007300620050004630420035002400GKS05
120001200010400820070006400560046003000GKS06
160001510012500105008700740063005400GKS07
2400021000155001220010600940082007500GKS09
300002500018500160001400011000100009000GKS11
4000028000210001850017500165001550015000GKS14
Max. axial force, Hollow shaft
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N]
550055005500550055005500500042003300GKS04
660066006600660061605090424035002800GKS05
1000010000100001000087106930558044403500GKS06
140001400014000126009940782062304900GKS07
2100021000170001300010500800074006500GKS09
2700027000185001450012000920080007000GKS11
35000280002000016000130001000080006000GKS14
ƒ Application of force Frad: at hollow shaft end face (x = 0)ƒ Fax,max only valid with Frad = 0ƒ Neither radial nor axial forces are permissible for thehollow shaft
with shrink disc (S☐☐).
Lenze | V02-en_GB-03/20146.9 - 24
GKS helical-bevel gearboxesTechnical data
6.9
Permissible radial and axial forces at output
GKS☐☐-3/4☐ V☐R
n2 [r/min]Size
≤16254063100160250400630Gearbox
Max. radial force, Solid shaft without flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N]
360036003600360036003600340030002400GKS04
580058005800490041003600320028002200GKS05
900090007900620053004900430037002700GKS06
1200012000960080006600580049004000GKS07
18000160001180095008400710064006200GKS09 1)
2300019000130001120010000820075007100GKS11 1)
6500065000650006500065000641006100057900GKS14
Max. axial force, Solid shaft without flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N]
550055005500550055005500500042003300GKS04
660066006600660061605090424035002800GKS05
1000010000100001000087106930558044403500GKS06
140001400014000126009940782062304900GKS07
2100021000170001300010500800074006500GKS09 1)
2700027000185001450012000920080007000GKS11 1)
3500035000350003500035000350003500035000GKS14
Reinforced output shaft bearings are available on request for V☐R versions.1)
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
6.9 - 25Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Permissible radial and axial forces at output
GKS☐☐-3/4☐ V☐K
n2 [r/min]Size
≤16254063100160250400630Gearbox
Max. radial force, Solid shaft with flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N]
460046004600460046004600430038003100GKS04
700070007000700070006280542046403800GKS05
1000010000100001000098008800750064004700GKS06
1400014000140001300011000963082507000GKS07
150001500015000150001400012000105009900GKS09
3000030000280002450021000176001600014500GKS11
4300043000410003500031300272002370020500GKS14
Max. axial force, Solid shaft with flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N]
440044004400440044004400440042003300GKS04
660066006600660066005420444036302900GKS05
1000010000100001000092307320588046603700GKS06
1150011500115001150010400850070005700GKS07
1700017000150001200010000760066006000GKS09
2700027000175001300010500850075007000GKS11
350002800019000150001300011500100008400GKS14
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
Lenze | V02-en_GB-03/20146.9 - 26
GKS helical-bevel gearboxesTechnical data
6.9
Output backlash in angular minutes
ƒ Backlash ϕ depending on ratio i
GKS04 to 14-3
GKS05 to 14-4
6.9 - 27Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Moments of inertia
GKS☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GKS05GearboxGKS04Gearbox1.170[kgcm²]J5.123 1.900[kgcm²]J6.863
1.170[kgcm²]J9.4120.676[kgcm²]J7.0250.863[kgcm²]J8.167 1.600[kgcm²]J10.569
1.647[kgcm²]J11.6670.444[kgcm²]J8.9910.729[kgcm²]J11.730 0.711[kgcm²]J13.176
1.045[kgcm²]J14.4940.701[kgcm²]J13.0670.346[kgcm²]J14.333 1.040[kgcm²]J16.000
1.505[kgcm²]J17.0540.443[kgcm²]J16.0870.428[kgcm²]J17.920 1.474[kgcm²]J19.216
0.964[kgcm²]J23.3880.302[kgcm²]J20.5880.262[kgcm²]J22.522 0.948[kgcm²]J26.353
0.674[kgcm²]J29.9310.254[kgcm²]J25.0880.182[kgcm²]J28.727 0.584[kgcm²]J32.744
0.576[kgcm²]J36.8940.177[kgcm²]J32.0000.136[kgcm²]J35.191 0.419[kgcm²]J41.765
0.414[kgcm²]J47.0590.132[kgcm²]J39.2000.090[kgcm²]J44.240 0.321[kgcm²]J51.162
0.317[kgcm²]J57.6470.181[kgcm²]J50.9430.061[kgcm²]J56.976 0.200[kgcm²]J66.592
0.198[kgcm²]J75.0330.132[kgcm²]J64.9780.040[kgcm²]J72.210 0.145[kgcm²]J82.833
0.144[kgcm²]J93.3330.103[kgcm²]J79.5980.027[kgcm²]J90.491 0.091[kgcm²]J107.196
0.091[kgcm²]J120.7840.069[kgcm²]J100.0670.069[kgcm²]J111.467 0.067[kgcm²]J130.097
0.066[kgcm²]J146.5880.048[kgcm²]J128.8740.048[kgcm²]J143.556 0.043[kgcm²]J166.276
0.042[kgcm²]J187.3530.032[kgcm²]J163.3320.032[kgcm²]J181.939 0.081[kgcm²]J211.200
0.060[kgcm²]J227.4840.022[kgcm²]J204.6820.022[kgcm²]J228.000 0.060[kgcm²]J256.320
0.038[kgcm²]J290.7450.014[kgcm²]J269.6600.014[kgcm²]J300.381 0.038[kgcm²]J327.600
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
Lenze | V02-en_GB-03/20146.9 - 28
GKS helical-bevel gearboxesTechnical data
6.9
Moments of inertia
GKS☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GKS07GearboxGKS06Gearbox5.870[kgcm²]J6.485 19.300[kgcm²]J5.955
11.800[kgcm²]J8.2545.048[kgcm²]J9.1964.858[kgcm²]J10.147 16.000[kgcm²]J9.171
15.882[kgcm²]J10.1242.492[kgcm²]J11.3823.199[kgcm²]J12.612 7.019[kgcm²]J11.378
10.164[kgcm²]J12.7114.287[kgcm²]J14.8244.163[kgcm²]J16.699 14.306[kgcm²]J14.798
13.965[kgcm²]J16.6742.126[kgcm²]J17.8092.794[kgcm²]J20.329 7.258[kgcm²]J17.270
9.084[kgcm²]J20.5112.729[kgcm²]J22.9021.941[kgcm²]J26.017 8.906[kgcm²]J23.111
6.716[kgcm²]J25.2441.666[kgcm²]J28.4611.632[kgcm²]J32.063 5.567[kgcm²]J28.274
5.473[kgcm²]J31.8581.183[kgcm²]J36.3032.110[kgcm²]J41.472 3.650[kgcm²]J36.063
6.934[kgcm²]J40.9060.900[kgcm²]J44.4711.523[kgcm²]J53.074 2.779[kgcm²]J44.178
5.298[kgcm²]J50.3450.578[kgcm²]J57.8820.570[kgcm²]J65.207 1.748[kgcm²]J57.501
1.725[kgcm²]J64.7900.422[kgcm²]J72.0000.416[kgcm²]J81.111 1.295[kgcm²]J70.474
1.280[kgcm²]J79.4070.257[kgcm²]J93.1760.254[kgcm²]J104.967 0.808[kgcm²]J92.563
0.799[kgcm²]J104.2960.189[kgcm²]J113.0820.186[kgcm²]J127.392 0.592[kgcm²]J112.338
0.586[kgcm²]J126.5780.122[kgcm²]J142.9410.121[kgcm²]J161.029 1.113[kgcm²]J140.548
1.113[kgcm²]J158.3640.227[kgcm²]J190.0800.226[kgcm²]J214.133 0.687[kgcm²]J184.600
0.685[kgcm²]J208.0000.168[kgcm²]J230.6880.167[kgcm²]J259.880 0.510[kgcm²]J224.037
0.509[kgcm²]J252.4360.109[kgcm²]J291.6000.109[kgcm²]J328.500 0.330[kgcm²]J283.193
0.329[kgcm²]J319.091
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.9 - 29Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Moments of inertia
GKS☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GKS11GearboxGKS09Gearbox34.200[kgcm²]J12.283 104.000[kgcm²]J12.094
101.000[kgcm²]J13.15433.400[kgcm²]J13.36022.600[kgcm²]J16.122 68.000[kgcm²]J15.874
66.500[kgcm²]J17.26522.200[kgcm²]J17.53630.600[kgcm²]J19.541 90.300[kgcm²]J19.515
90.400[kgcm²]J21.98929.900[kgcm²]J22.02220.500[kgcm²]J25.649 61.200[kgcm²]J25.615
52.200[kgcm²]J28.02115.900[kgcm²]J29.22815.600[kgcm²]J32.940 51.300[kgcm²]J31.573
36.800[kgcm²]J35.74112.200[kgcm²]J35.19312.000[kgcm²]J39.662 36.200[kgcm²]J40.272
27.900[kgcm²]J43.7839.000[kgcm²]J43.1468.870[kgcm²]J48.625 27.500[kgcm²]J49.333
17.700[kgcm²]J57.6835.540[kgcm²]J58.4565.470[kgcm²]J65.879 17.500[kgcm²]J64.995
13.000[kgcm²]J70.8874.140[kgcm²]J70.9824.100[kgcm²]J79.996 12.900[kgcm²]J79.873
8.300[kgcm²]J91.7372.630[kgcm²]J91.8602.610[kgcm²]J103.524 8.210[kgcm²]J103.365
6.050[kgcm²]J111.3351.920[kgcm²]J111.4841.900[kgcm²]J125.641 5.990[kgcm²]J125.448
3.960[kgcm²]J140.7321.260[kgcm²]J140.9211.250[kgcm²]J158.816 3.930[kgcm²]J158.571
7.070[kgcm²]J186.5722.250[kgcm²]J182.0002.240[kgcm²]J205.111 7.050[kgcm²]J210.222
5.210[kgcm²]J226.4311.660[kgcm²]J220.8821.650[kgcm²]J248.930 5.200[kgcm²]J255.133
3.440[kgcm²]J286.2191.100[kgcm²]J279.2051.100[kgcm²]J314.659 3.430[kgcm²]J322.500
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
Lenze | V02-en_GB-03/20146.9 - 30
GKS helical-bevel gearboxesTechnical data
6.9
Moments of inertia
GKS☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GKS14Gearbox283.000[kgcm²]J12.435275.000[kgcm²]J13.525198.000[kgcm²]J16.646173.000[kgcm²]J18.311249.000[kgcm²]J20.065243.000[kgcm²]J22.609183.000[kgcm²]J24.696159.000[kgcm²]J27.165156.000[kgcm²]J30.609111.000[kgcm²]J34.692109.000[kgcm²]J39.08982.400[kgcm²]J42.53181.100[kgcm²]J47.92354.200[kgcm²]J56.25153.500[kgcm²]J63.38238.900[kgcm²]J68.94238.400[kgcm²]J77.68125.100[kgcm²]J90.55124.900[kgcm²]J102.02918.300[kgcm²]J109.89618.100[kgcm²]J123.82612.000[kgcm²]J138.91311.900[kgcm²]J156.52221.600[kgcm²]J186.57221.500[kgcm²]J210.22215.900[kgcm²]J226.43115.800[kgcm²]J255.13310.500[kgcm²]J286.21910.500[kgcm²]J322.500
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.9 - 31Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Moments of inertia
GKS☐☐-4
ƒ Moment of inertia (J) depending on ratio i
GKS06GearboxGKS05Gearbox0.143[kgcm²]J95.238 0.300[kgcm²]J103.721
0.234[kgcm²]J113.2050.196[kgcm²]J114.9870.196[kgcm²]J126.933 0.264[kgcm²]J127.059
0.213[kgcm²]J140.8160.142[kgcm²]J146.6670.141[kgcm²]J161.905 0.191[kgcm²]J155.647
0.112[kgcm²]J174.3360.195[kgcm²]J185.5470.195[kgcm²]J209.067 0.168[kgcm²]J202.588
0.074[kgcm²]J224.5240.073[kgcm²]J225.8670.141[kgcm²]J236.667 0.155[kgcm²]J252.000
0.069[kgcm²]J279.2860.108[kgcm²]J289.9170.108[kgcm²]J326.667 0.102[kgcm²]J316.800
0.064[kgcm²]J361.4290.073[kgcm²]J364.4670.073[kgcm²]J410.667 0.068[kgcm²]J408.000
0.042[kgcm²]J458.0670.050[kgcm²]J469.3890.023[kgcm²]J510.000 0.044[kgcm²]J517.091
0.041[kgcm²]J555.9270.050[kgcm²]J528.8890.033[kgcm²]J594.894 0.062[kgcm²]J640.800
0.028[kgcm²]J696.6680.033[kgcm²]J670.3030.050[kgcm²]J820.760 0.040[kgcm²]J812.137
0.040[kgcm²]J914.9070.050[kgcm²]J924.8000.033[kgcm²]J1040.215 0.028[kgcm²]J1017.741
0.028[kgcm²]J1146.5290.033[kgcm²]J1172.0730.023[kgcm²]J1303.560 0.017[kgcm²]J1340.834
0.017[kgcm²]J1510.5070.023[kgcm²]J1468.8000.014[kgcm²]J1717.3890.014[kgcm²]J1935.086
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
Lenze | V02-en_GB-03/20146.9 - 32
GKS helical-bevel gearboxesTechnical data
6.9
Moments of inertia
GKS☐☐-4
ƒ Moment of inertia (J) depending on ratio i
GKS09GearboxGKS07Gearbox0.837[kgcm²]J103.039 2.480[kgcm²]J100.551
2.456[kgcm²]J113.3200.632[kgcm²]J112.3910.729[kgcm²]J126.222 2.107[kgcm²]J123.275
2.091[kgcm²]J138.9290.571[kgcm²]J137.7480.527[kgcm²]J154.622 1.516[kgcm²]J151.012
1.505[kgcm²]J170.1880.283[kgcm²]J179.2010.454[kgcm²]J201.254 1.244[kgcm²]J204.596
1.239[kgcm²]J230.5770.199[kgcm²]J222.9090.417[kgcm²]J246.659 1.128[kgcm²]J248.439
1.125[kgcm²]J279.9860.184[kgcm²]J273.1990.256[kgcm²]J321.049 0.713[kgcm²]J323.365
0.710[kgcm²]J364.4270.169[kgcm²]J358.8290.182[kgcm²]J399.353 0.509[kgcm²]J402.234
0.507[kgcm²]J453.3110.106[kgcm²]J464.3670.113[kgcm²]J516.810 0.466[kgcm²]J520.538
0.465[kgcm²]J586.6380.101[kgcm²]J563.5720.161[kgcm²]J636.581 0.443[kgcm²]J631.744
0.443[kgcm²]J711.9650.074[kgcm²]J683.9720.101[kgcm²]J823.810 0.276[kgcm²]J817.551
0.276[kgcm²]J921.3670.101[kgcm²]J928.2370.073[kgcm²]J999.806 0.201[kgcm²]J992.209
0.201[kgcm²]J1118.2040.073[kgcm²]J1126.5420.047[kgcm²]J1277.842 0.130[kgcm²]J1254.197
0.130[kgcm²]J1413.4610.047[kgcm²]J1439.822
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.9 - 33Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Moments of inertia
GKS☐☐-4
ƒ Moment of inertia (J) depending on ratio i
GKS14GearboxGKS11Gearbox7.276[kgcm²]J102.119 23.471[kgcm²]J97.467
23.232[kgcm²]J109.8227.205[kgcm²]J115.0636.233[kgcm²]J125.095 19.936[kgcm²]J119.493
19.777[kgcm²]J134.6406.186[kgcm²]J140.9524.500[kgcm²]J153.242 16.438[kgcm²]J158.039
16.348[kgcm²]J178.0724.469[kgcm²]J172.6673.735[kgcm²]J201.890 12.076[kgcm²]J193.754
12.016[kgcm²]J218.3153.717[kgcm²]J227.4813.355[kgcm²]J248.106 10.871[kgcm²]J237.467
10.830[kgcm²]J267.5683.343[kgcm²]J279.5562.088[kgcm²]J322.931 6.420[kgcm²]J321.729
6.398[kgcm²]J362.5122.081[kgcm²]J363.8661.521[kgcm²]J395.787 4.749[kgcm²]J390.671
4.734[kgcm²]J440.1931.517[kgcm²]J445.9581.385[kgcm²]J512.196 4.330[kgcm²]J513.121
4.322[kgcm²]J578.1641.382[kgcm²]J577.1221.314[kgcm²]J621.619 4.122[kgcm²]J622.742
4.116[kgcm²]J701.6811.312[kgcm²]J700.4160.819[kgcm²]J816.455 2.620[kgcm²]J805.901
2.617[kgcm²]J908.0580.818[kgcm²]J919.9490.600[kgcm²]J990.879 1.912[kgcm²]J978.071
1.909[kgcm²]J1102.0520.599[kgcm²]J1116.4840.386[kgcm²]J1252.516 1.259[kgcm²]J1236.326
1.258[kgcm²]J1393.0430.385[kgcm²]J1411.286
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
Lenze | V02-en_GB-03/20146.9 - 34
GKS helical-bevel gearboxesTechnical data
6.9
Weights
GKS☐☐-3M HAR / HBR
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
231816[kg]mGKS0441332826[kg]mGKS05
6455474240[kg]mGKS06132102898173[kg]mGKS07
181150138129[kg]mGKS09279249237[kg]mGKS11447420[kg]mGKS14
GKS☐☐-3M HAK
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
262119[kg]mGKS0445373230[kg]mGKS05
7162544947[kg]mGKS061431131009284[kg]mGKS07
197166154145[kg]mGKS09303273261[kg]mGKS11480453[kg]mGKS14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.9 - 35Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Weights
GKS☐☐-3M VAR / VBR
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
241917[kg]mGKS0442342927[kg]mGKS05
6658494543[kg]mGKS06137107948678[kg]mGKS07
189158146137[kg]mGKS09295265253[kg]mGKS11480453[kg]mGKS14
GKS☐☐-3M VAK
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
262119[kg]mGKS0446383331[kg]mGKS05
7365565250[kg]mGKS061481181059789[kg]mGKS07
205174162153[kg]mGKS09319289277[kg]mGKS11513486[kg]mGKS14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.9 - 36
GKS helical-bevel gearboxesTechnical data
6.9
Weights
GKS☐☐-3M SAR / SBR
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
241917[kg]mGKS0442342927[kg]mGKS05
6556484341[kg]mGKS06133104918274[kg]mGKS07
184153141132[kg]mGKS09284254242[kg]mGKS11458431[kg]mGKS14
GKS☐☐-3M SAK
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
262119[kg]mGKS0446383331[kg]mGKS05
7263555048[kg]mGKS061441151029385[kg]mGKS07
200169157148[kg]mGKS09308278266[kg]mGKS11491464[kg]mGKS14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.9 - 37Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Weights
GKS☐☐-4M HAR / HBR
132C32132C12112C22100C12090C32080C42080C32071C32063C32132C22100C32071C42063C42
27[kg]mGKS05514644[kg]mGKS06
89817674[kg]mGKS07164151142134129127[kg]mGKS09
301271258250242[kg]mGKS11487456444435[kg]mGKS14
GKS☐☐-4M HAK
132C32132C12112C22100C12090C32080C42080C32071C32063C32132C22100C32071C42063C42
31[kg]mGKS05585351[kg]mGKS06
100928785[kg]mGKS07180167158150145143[kg]mGKS09
325295282274266[kg]mGKS11520489477468[kg]mGKS14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.9 - 38
GKS helical-bevel gearboxesTechnical data
6.9
Weights
GKS☐☐-4M VAR / VBR
132C32132C12112C22100C12090C32080C42080C32071C32063C32132C22100C32071C42063C42
28[kg]mGKS05534846[kg]mGKS06
94868179[kg]mGKS07172159150142137135[kg]mGKS09
317287274266258[kg]mGKS11520489477468[kg]mGKS14
GKS☐☐-4M VAK
132C32132C12112C22100C12090C32080C42080C32071C32063C32132C22100C32071C42063C42
32[kg]mGKS05605553[kg]mGKS06
105979290[kg]mGKS07188175166158153151[kg]mGKS09
341311298290282[kg]mGKS11553522510501[kg]mGKS14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.9 - 39Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Weights
GKS☐☐-4M SAR / SBR
132C32132C12112C22100C12090C32080C42080C32071C32063C32132C22100C32071C42063C42
28[kg]mGKS05524745[kg]mGKS06
90827875[kg]mGKS07167154145137132130[kg]mGKS09
306276263255247[kg]mGKS11498467455446[kg]mGKS14
GKS☐☐-4M SAK
132C32132C12112C22100C12090C32080C42080C32071C32063C32132C22100C32071C42063C42
32[kg]mGKS05595452[kg]mGKS06
101938986[kg]mGKS07183170161153148146[kg]mGKS09
330300287279271[kg]mGKS11531500488479[kg]mGKS14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.9 - 40
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C328.9914.5139.9383-6716
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C329.8364.51411350-6115
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C3213.1763.91915261-4611
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3214.3334.52116240-4210
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3220.5884.53023167-297.0
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3222.5224.23325153-276.4
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3225.0883.53628137-245.7
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3228.7273.34232120-215.0
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3232.0002.74635108-194.5
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3235.1912.7513998-174.1
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3239.2002.2574388-153.7
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3244.2402.5644978-143.2
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3250.9432.1745668-122.8
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3256.9762.0836360-112.5
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3264.9781.7947153-9.22.2
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C3266.5923.0977352-9.02.2
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3272.2101.61057948-8.32.0
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C3275.0332.51098246-8.01.9
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3279.5981.41158743-7.51.8
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C3282.8332.41209142-7.21.7
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C3290.4911.21319938-6.61.6
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C3293.3332.013510237-6.41.5
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C3295.2381.113610336-6.31.5
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C32100.0671.114511034-6.01.4
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C32107.1961.815611832-5.61.3
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C32111.4671.016212231-5.41.3
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C32114.9871.516412430-5.21.3
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32113.2053.216112230-5.31.3
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C32120.7841.717513329-5.01.2
66E84AV☐☐☐5514☐☐0GKS04-3M☐☐☐063C32128.8741.018714227-4.71.1
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C32126.9331.518113727-4.71.1
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C32130.0971.718914326-4.61.1
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C32146.6671.220915824-4.11.0
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C32146.5881.421316124-4.11.0
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32140.8162.620115224-4.31.0
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32142.9412.820715724-4.21.0
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32155.6473.022216822-3.90.9
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C32161.9051.223117521-3.70.9
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C32166.2761.324118321-3.60.9
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32161.0292.623417721-3.70.9
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32174.3362.124918820-3.40.8
6.9 - 41Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C32185.5471.226520019-3.20.8
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C32187.3531.127220618-3.20.8
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32190.0802.427620918-3.20.8
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C32209.0671.029822617-2.90.7
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32202.5882.328921917-3.00.7
66E84AV☐☐☐5514☐☐0GKS05-3M☐☐☐063C32211.2001.030623216-2.80.7
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32214.1332.031123516-2.80.7
74E84AV☐☐☐5514☐☐0GKS05-4M☐☐☐063C32236.6670.933725515-2.50.6
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32224.5241.632024215-2.70.6
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32230.6882.033525315-2.60.6
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32222.9093.231824115-2.70.6
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32252.0001.935927214-2.40.6
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32259.8801.637728513-2.30.6
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32273.1992.639029513-2.20.5
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32279.2861.339830112-2.20.5
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32291.6001.642332012-2.10.5
66E84AV☐☐☐5514☐☐0GKS06-3M☐☐☐063C32328.5001.347636111-1.80.4
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32316.8001.545234211-1.90.5
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32321.0492.845834611-1.90.5
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32358.8292.05123879.6-1.70.4
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32361.4291.05153909.5-1.70.4
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32399.3532.25694318.6-1.50.4
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32408.0001.25824408.4-1.50.4
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32464.3671.56625017.4-1.30.3
74E84AV☐☐☐5514☐☐0GKS06-4M☐☐☐063C32517.0910.97375586.7-1.20.3
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32516.8101.77375586.7-1.20.3
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32563.5721.38036086.1-1.10.3
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32636.5811.49086875.4-0.90.2
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32683.9721.09757385.0-0.90.2
74E84AV☐☐☐5514☐☐0GKS07-4M☐☐☐063C32823.8101.111748894.2-0.70.2
74E84AV☐☐☐5514☐☐0GKS09-4M☐☐☐063C32817.5512.511668824.2-0.70.2
74E84AV☐☐☐5514☐☐0GKS09-4M☐☐☐063C32921.3672.213149943.7-0.70.2
74E84AV☐☐☐5514☐☐0GKS09-4M☐☐☐063C32992.2092.0141510713.5-0.60.1
74E84AV☐☐☐5514☐☐0GKS09-4M☐☐☐063C321118.2041.8159412073.1-0.50.1
74E84AV☐☐☐5514☐☐0GKS09-4M☐☐☐063C321254.1971.6178813532.7-0.50.1
74E84AV☐☐☐5514☐☐0GKS09-4M☐☐☐063C321413.4611.5201515252.4-0.40.1
Lenze | V02-en_GB-03/20146.9 - 42
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C428.9913.31814378-6716
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C429.8363.32015346-6114
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4213.1762.92620258-4611
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4214.3333.32922237-429.9
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4220.5883.34131165-296.9
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4222.5223.14534151-276.3
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4225.0882.55038136-245.7
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4228.7272.45843118-214.9
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4232.0002.06448106-194.4
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4232.7442.96649104-184.3
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4235.1912.0705397-174.0
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4236.8942.9745592-163.8
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4239.2001.6785987-153.6
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4241.7653.0846381-143.4
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4244.2401.8896677-143.2
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4247.0592.8947072-133.0
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4250.9431.51027667-122.8
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4256.9761.41148560-112.5
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4264.9781.21309752-9.22.2
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4266.5922.113310051-9.02.1
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4272.2101.114510847-8.32.0
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4275.0331.815011245-8.01.9
66E84AV☐☐☐7514☐☐0GKS04-3M☐☐☐063C4279.5981.015911943-7.51.8
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4282.8331.716612441-7.21.7
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C4293.1762.618614037-6.41.5
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C4293.3331.518714036-6.41.5
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42103.7212.920415333-5.81.4
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C42107.1961.321516032-5.61.3
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42104.9672.621015732-5.71.4
74E84AV☐☐☐7514☐☐0GKS05-4M☐☐☐063C42114.9871.122616930-5.21.2
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42113.2052.322316730-5.31.3
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42113.0822.522616930-5.31.3
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C42120.7841.324218128-5.01.2
74E84AV☐☐☐7514☐☐0GKS05-4M☐☐☐063C42126.9331.125018727-4.71.1
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42127.3922.425519127-4.71.1
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42127.0592.625018727-4.71.1
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C42130.0971.226019526-4.61.1
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42140.8161.927720724-4.31.0
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42142.9412.028621424-4.21.0
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C42146.5881.029321923-4.11.0
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42155.6472.230622922-3.90.9
6.9 - 43Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42161.0291.932224121-3.70.9
66E84AV☐☐☐7514☐☐0GKS05-3M☐☐☐063C42166.2761.033324920-3.60.9
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42174.3361.534325720-3.40.8
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42179.2012.935326419-3.40.8
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42190.0801.838028518-3.20.8
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42202.5881.739929817-3.00.7
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42214.1331.442832116-2.80.7
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42224.5241.244233015-2.70.6
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42230.6881.546234515-2.60.6
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42222.9092.343832815-2.70.6
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42252.0001.449637114-2.40.6
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42259.8801.252038913-2.30.6
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42279.2860.954941112-2.20.5
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42291.6001.258343712-2.10.5
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42273.1991.953740212-2.20.5
74E84AV☐☐☐7514☐☐0GKS06-4M☐☐☐063C42316.8001.162346611-1.90.5
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42321.0492.063147211-1.90.4
66E84AV☐☐☐7514☐☐0GKS06-3M☐☐☐063C42328.5000.965749210-1.80.4
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42358.8291.47065289.5-1.70.4
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42399.3531.67865888.5-1.50.4
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42464.3671.19136837.3-1.30.3
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42516.8101.210177606.6-1.20.3
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42563.5720.911098296.0-1.10.3
74E84AV☐☐☐7514☐☐0GKS07-4M☐☐☐063C42636.5811.012529375.3-0.90.2
74E84AV☐☐☐7514☐☐0GKS09-4M☐☐☐063C42817.5511.8160812034.2-0.70.2
74E84AV☐☐☐7514☐☐0GKS09-4M☐☐☐063C42921.3671.6181213563.7-0.70.2
74E84AV☐☐☐7514☐☐0GKS09-4M☐☐☐063C42992.2091.5195214603.4-0.60.1
74E84AV☐☐☐7514☐☐0GKS09-4M☐☐☐063C421118.2041.3219916453.0-0.50.1
74E84AV☐☐☐7514☐☐0GKS09-4M☐☐☐063C421254.1971.2246718452.7-0.50.1
74E84AV☐☐☐7514☐☐0GKS09-4M☐☐☐063C421413.4611.1278020802.4-0.40.1
Lenze | V02-en_GB-03/20146.9 - 44
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C328.9913.02620388-6716
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C329.8362.92822355-6115
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3213.1763.33829265-4611
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3214.3333.04132244-4210
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3220.5882.35945170-297.1
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3222.5222.16449155-276.5
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3225.0881.87255139-245.8
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3228.7271.78263122-215.1
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3229.9312.98666117-204.9
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3232.0001.49270109-194.5
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3232.7442.79472107-184.4
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3235.1911.41017799-174.1
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3236.8942.21068195-163.9
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3239.2001.11128689-153.7
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3241.7652.11199284-143.5
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3244.2401.31279779-143.3
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3247.0591.913510374-133.1
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3250.9431.114611269-122.9
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3251.1621.914611268-122.8
66E84AV☐☐☐1124☐☐0GKS04-3M☐☐☐071C3256.9761.016312561-112.6
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3257.6471.616512761-102.5
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C3265.2072.918614354-9.22.2
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3266.5921.519014652-9.02.2
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C3272.0002.920615849-8.32.0
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3275.0331.221516547-8.01.9
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C3281.1112.323217843-7.41.8
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3282.8331.223718242-7.21.8
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C3293.1762.326620538-6.41.6
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C3293.3331.026720537-6.41.6
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32103.7212.029222434-5.81.4
66E84AV☐☐☐1124☐☐0GKS05-3M☐☐☐071C32107.1960.930723533-5.61.4
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32104.9671.830023033-5.71.4
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32113.2051.631824431-5.31.3
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32113.0822.132324831-5.31.3
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32112.3913.231624331-5.31.3
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32127.0591.835727428-4.71.1
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32127.3921.736428027-4.71.1
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32140.8161.339630425-4.31.0
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32137.7482.638729725-4.41.1
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32142.9411.640931424-4.21.0
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32154.6222.843533423-3.90.9
6.9 - 45Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32161.0291.346035422-3.70.9
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32155.6471.543733622-3.90.9
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32174.3361.049037620-3.40.8
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32179.2012.050438720-3.40.8
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32190.0801.254341718-3.20.8
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32202.5881.256943717-3.00.7
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32201.2542.256643417-3.00.7
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32214.1331.061247016-2.80.7
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32222.9091.662648116-2.70.7
66E84AV☐☐☐1124☐☐0GKS06-3M☐☐☐071C32230.6881.066050615-2.60.6
74E84AV☐☐☐1124☐☐0GKS06-4M☐☐☐071C32252.0000.970854414-2.40.6
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32246.6591.869353214-2.40.6
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32273.1991.376859013-2.20.5
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32321.0491.490269311-1.90.5
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32323.3653.290969811-1.90.5
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32358.8291.010087749.7-1.70.4
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32364.4272.910247869.6-1.70.4
74E84AV☐☐☐1124☐☐0GKS07-4M☐☐☐071C32399.3531.111228628.7-1.50.4
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32402.2342.511308688.7-1.50.4
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32453.3112.312749787.7-1.30.3
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32520.5382.0146311236.7-1.20.3
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32586.6381.8164912666.0-1.00.3
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32631.7441.6177513635.5-1.00.2
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32711.9651.5200115364.9-0.80.2
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32817.5511.3229817644.3-0.70.2
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32921.3671.1258919883.8-0.70.2
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C32992.2091.0278821413.5-0.60.2
74E84AV☐☐☐1124☐☐0GKS09-4M☐☐☐071C321118.2040.9314324133.1-0.50.1
Lenze | V02-en_GB-03/20146.9 - 46
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C428.9912.23627384-6716
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C429.8362.13929351-6115
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4213.1762.45239262-4611
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4214.3332.25743241-4210
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4220.5881.78162168-297.0
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4222.5221.68967153-276.4
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4225.0881.39975138-245.7
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4228.7271.211386120-215.0
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4229.9312.111890115-204.8
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4232.0001.012696108-194.5
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4232.7441.912998105-184.4
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4235.1911.013910598-174.1
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C4236.3033.114310995-174.0
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4236.8941.614611094-163.9
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4241.7651.516512583-143.4
66E84AV☐☐☐1524☐☐0GKS04-3M☐☐☐071C4244.2400.917513278-143.3
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4247.0591.418614173-133.1
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4251.1621.420215367-122.8
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4257.6471.222717360-102.5
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C4257.8822.622817360-102.5
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C4265.2072.125719553-9.22.2
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4266.5921.126319952-9.02.2
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C4272.0002.128421648-8.32.0
66E84AV☐☐☐1524☐☐0GKS05-3M☐☐☐071C4275.0330.929622546-8.01.9
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C4281.1111.732024343-7.41.8
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C4293.1761.636827937-6.41.5
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42103.0392.839930334-5.81.4
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C42104.9671.341431433-5.71.4
74E84AV☐☐☐1524☐☐0GKS06-4M☐☐☐071C42103.7211.540230533-5.81.4
74E84AV☐☐☐1524☐☐0GKS06-4M☐☐☐071C42113.2051.243933331-5.31.3
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C42113.0821.544633931-5.31.3
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42112.3912.343633131-5.31.3
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C42127.3921.250238127-4.71.1
74E84AV☐☐☐1524☐☐0GKS06-4M☐☐☐071C42127.0591.349337427-4.71.1
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42126.2222.548937127-4.81.1
74E84AV☐☐☐1524☐☐0GKS06-4M☐☐☐071C42140.8160.954641425-4.31.0
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42137.7481.953440525-4.41.0
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C42142.9411.256442824-4.21.0
74E84AV☐☐☐1524☐☐0GKS06-4M☐☐☐071C42155.6471.160345822-3.90.9
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42154.6222.159945522-3.90.9
66E84AV☐☐☐1524☐☐0GKS06-3M☐☐☐071C42161.0291.063548221-3.70.9
6.9 - 47Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42179.2011.469552719-3.40.8
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42201.2541.678059217-3.00.7
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42222.9091.286465616-2.70.6
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42246.6591.395672614-2.40.6
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42273.1990.9105980413-2.20.5
74E84AV☐☐☐1524☐☐0GKS07-4M☐☐☐071C42321.0491.0124594511-1.90.5
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42323.3652.3125495211-1.90.4
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42364.4272.1141310729.5-1.70.4
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42402.2341.9155911848.6-1.50.4
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42453.3111.7175713347.6-1.30.3
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42520.5381.4201815326.6-1.20.3
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42586.6381.3227417265.9-1.00.3
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42631.7441.2244918595.5-1.00.2
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42711.9651.1276020954.9-0.80.2
74E84AV☐☐☐1524☐☐0GKS09-4M☐☐☐071C42817.5510.9316924064.2-0.70.2
Lenze | V02-en_GB-03/20146.9 - 48
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐2224☐☐0GKS04-3M☐☐☐080C328.9911.55138389-6716
66E84AV☐☐☐2224☐☐0GKS04-3M☐☐☐080C329.8361.45642356-6115
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3211.3823.86549308-5313
66E84AV☐☐☐2224☐☐0GKS05-3M☐☐☐080C3213.1761.77556266-4611
66E84AV☐☐☐2224☐☐0GKS04-3M☐☐☐080C3214.3331.58261244-4210
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3217.8093.810276197-348.2
66E84AV☐☐☐2224☐☐0GKS04-3M☐☐☐080C3220.5881.211788170-297.1
66E84AV☐☐☐2224☐☐0GKS04-3M☐☐☐080C3222.5221.112896155-276.5
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3226.0173.5148111135-235.6
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3228.4613.2162122123-215.1
66E84AV☐☐☐2224☐☐0GKS05-3M☐☐☐080C3229.9311.5171128117-204.9
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3232.0632.5183137109-194.6
66E84AV☐☐☐2224☐☐0GKS05-3M☐☐☐080C3232.7441.3187140107-184.5
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3236.3032.520715596-174.0
66E84AV☐☐☐2224☐☐0GKS05-3M☐☐☐080C3236.8941.121015895-164.0
66E84AV☐☐☐2224☐☐0GKS05-3M☐☐☐080C3241.7651.023817984-143.5
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3244.4712.325419079-143.3
66E84AV☐☐☐2224☐☐0GKS05-3M☐☐☐080C3247.0591.026820174-133.1
66E84AV☐☐☐2224☐☐0GKS05-3M☐☐☐080C3251.1621.029221968-122.9
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3253.0742.030322766-112.8
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3257.8821.833024761-102.5
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3265.2071.437227954-9.22.2
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C3264.7902.836927754-9.32.3
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C3270.4742.840230150-8.52.1
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3272.0001.541130849-8.32.0
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C3279.4072.345333944-7.61.8
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3281.1111.246334743-7.41.8
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C3293.1761.153139838-6.41.6
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C3292.5632.252839638-6.51.6
74E84AV☐☐☐2224☐☐0GKS06-4M☐☐☐080C32103.7211.058143634-5.81.4
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32104.2961.859544634-5.81.4
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32103.0391.957843334-5.81.4
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C32104.9670.959944933-5.71.4
66E84AV☐☐☐2224☐☐0GKS06-3M☐☐☐080C32113.0821.064548331-5.31.3
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32112.3911.663047231-5.31.3
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32112.3382.064148031-5.31.3
74E84AV☐☐☐2224☐☐0GKS06-4M☐☐☐080C32127.0590.971253428-4.71.2
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32126.5781.672254128-4.71.2
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32126.2221.770853028-4.81.2
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32137.7481.377257925-4.41.1
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32140.5481.680160125-4.31.0
6.9 - 49Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32154.6221.486765023-3.90.9
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32158.3641.390367722-3.80.9
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32170.1883.095471521-3.50.9
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32179.2011.0100475320-3.40.8
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32184.6001.2105378919-3.30.8
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32208.0001.0118688917-2.90.7
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32201.2541.1112884617-3.00.7
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32204.5962.5114786017-2.90.7
66E84AV☐☐☐2224☐☐0GKS07-3M☐☐☐080C32224.0371.0127795816-2.70.7
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32230.5772.2129296915-2.60.6
74E84AV☐☐☐2224☐☐0GKS07-4M☐☐☐080C32246.6590.91383103614-2.40.6
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32248.4392.11393104414-2.40.6
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32279.9861.91569117613-2.10.5
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32323.3651.61812135911-1.90.5
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32322.9313.11810135711-1.90.5
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32364.4271.4204315319.6-1.70.4
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32363.8662.8204015299.6-1.70.4
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32395.7872.6221816638.8-1.50.4
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32402.2341.3225516908.7-1.50.4
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32445.9582.3250018747.9-1.40.3
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32453.3111.1254119057.7-1.30.3
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32512.1962.0287121526.8-1.20.3
74E84AV☐☐☐2224☐☐0GKS09-4M☐☐☐080C32520.5381.0291821876.7-1.20.3
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32577.1221.8323524256.1-1.00.3
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32621.6191.6348426125.6-1.00.2
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32700.4161.5392629435.0-0.90.2
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32816.4551.2457634314.3-0.70.2
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32919.9491.1515638653.8-0.70.2
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C32990.8791.0555441633.5-0.60.2
74E84AV☐☐☐2224☐☐0GKS11-4M☐☐☐080C321116.4840.9625846913.1-0.50.1
Lenze | V02-en_GB-03/20146.9 - 50
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐3024☐☐0GKS04-3M☐☐☐080C428.9911.17053387-10016
66E84AV☐☐☐3024☐☐0GKS04-3M☐☐☐080C429.8361.07758354-9215
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4211.3822.88967306-7913
66E84AV☐☐☐3024☐☐0GKS05-3M☐☐☐080C4213.1761.210377264-6811
66E84AV☐☐☐3024☐☐0GKS04-3M☐☐☐080C4214.3331.111284243-6310
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4217.8092.8139105195-518.1
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4226.0172.5204153134-355.6
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4228.4612.3223167122-325.1
66E84AV☐☐☐3024☐☐0GKS05-3M☐☐☐080C4229.9311.1234176116-304.8
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4232.0631.8251188109-284.5
66E84AV☐☐☐3024☐☐0GKS05-3M☐☐☐080C4232.7441.0256192106-284.4
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C4236.0633.128221297-254.0
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4236.3031.828421396-254.0
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4244.4711.734826178-203.3
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4253.0741.441531166-172.7
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C4257.5012.545033761-162.5
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4257.8821.345334060-162.5
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C4264.7902.050738054-142.2
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4265.2071.151038253-142.2
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C4270.4742.155141349-132.1
66E84AV☐☐☐3024☐☐0GKS06-3M☐☐☐080C4272.0001.156342248-132.0
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C4279.4071.762146644-111.8
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C4292.5631.672454338-9.71.6
74E84AV☐☐☐3024☐☐0GKS07-4M☐☐☐080C42103.0391.479259434-8.71.4
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C42104.2961.381661233-8.61.4
74E84AV☐☐☐3024☐☐0GKS07-4M☐☐☐080C42112.3911.286464831-8.01.3
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C42112.3381.487965931-8.01.3
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C42126.5781.299074228-7.11.2
74E84AV☐☐☐3024☐☐0GKS07-4M☐☐☐080C42126.2221.397072828-7.11.2
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42123.2753.094871128-7.31.2
74E84AV☐☐☐3024☐☐0GKS07-4M☐☐☐080C42137.7480.9105979425-6.51.1
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C42140.5481.2109982425-6.41.0
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42138.9292.7106880125-6.51.0
74E84AV☐☐☐3024☐☐0GKS07-4M☐☐☐080C42154.6221.0118989123-5.80.9
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42151.0122.5116187123-6.01.0
66E84AV☐☐☐3024☐☐0GKS07-3M☐☐☐080C42158.3640.9123892922-5.70.9
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42170.1882.2130898120-5.30.9
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42204.5961.81573118017-4.40.7
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42230.5771.61773132915-3.90.6
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42248.4391.51910143214-3.60.6
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42279.9861.42152161412-3.20.5
6.9 - 51Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42323.3651.22486186411-2.80.5
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42322.9312.32482186211-2.80.5
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42364.4271.0280121019.6-2.50.4
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42363.8662.1279720989.6-2.50.4
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42395.7871.9304222828.8-2.30.4
74E84AV☐☐☐3024☐☐0GKS09-4M☐☐☐080C42402.2340.9309223198.7-2.20.4
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42445.9581.7342825717.8-2.00.3
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42512.1961.4393729536.8-1.80.3
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42577.1221.3443633276.0-1.60.3
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42621.6191.2477835845.6-1.50.2
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42700.4161.1538440385.0-1.30.2
74E84AV☐☐☐3024☐☐0GKS11-4M☐☐☐080C42816.4550.9627647074.3-1.10.2
Lenze | V02-en_GB-03/20146.9 - 52
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3211.3822.111983306-5313
66E84AV☐☐☐4024☐☐0GKS05-3M☐☐☐090C3213.1760.913796264-4611
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3217.8092.1186130195-348.1
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3226.0171.9271190134-235.6
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3228.4611.7297208122-215.1
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3232.0631.4334234109-194.5
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C3236.0632.637626397-174.0
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3236.3031.437926596-174.0
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3244.4711.346432578-143.3
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3253.0741.155338766-112.7
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C3257.5011.960042061-102.5
66E84AV☐☐☐4024☐☐0GKS06-3M☐☐☐090C3257.8821.060442360-102.5
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C3264.7901.567647354-9.32.2
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C3270.4741.573551449-8.52.1
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C3279.4071.282858044-7.61.8
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C3292.5631.296567638-6.51.6
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C3291.8602.395867138-6.51.6
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32100.5512.5103172135-6.01.4
74E84AV☐☐☐4024☐☐0GKS07-4M☐☐☐090C32103.0391.0105673934-5.81.4
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32103.5242.3107975634-5.81.4
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C32104.2961.0108876133-5.81.4
66E84AV☐☐☐4024☐☐0GKS07-3M☐☐☐090C32112.3381.1117182031-5.31.3
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32111.4842.2116281431-5.41.3
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32113.3202.5116281331-5.31.3
74E84AV☐☐☐4024☐☐0GKS07-4M☐☐☐090C32126.2221.0129490628-4.81.2
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32125.6412.2131091728-4.81.2
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32123.2752.3126488428-4.91.2
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32140.9211.71469102925-4.31.0
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32138.9292.0142499725-4.31.0
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32151.0121.91548108323-4.01.0
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32158.8161.71656115922-3.80.9
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32170.1881.61744122120-3.50.9
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32182.0001.51898132819-3.30.8
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32204.5961.42097146817-2.90.7
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32205.1111.42139149717-2.90.7
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32220.8821.32303161216-2.70.7
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32230.5771.22363165415-2.60.6
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32248.4391.12546178214-2.40.6
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32248.9301.12596181714-2.40.6
66E84AV☐☐☐4024☐☐0GKS09-3M☐☐☐090C32279.2051.02911203813-2.20.5
74E84AV☐☐☐4024☐☐0GKS09-4M☐☐☐090C32279.9861.02870200912-2.10.5
6.9 - 53Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐4024☐☐0GKS11-4M☐☐☐090C32322.9311.73310231711-1.90.5
74E84AV☐☐☐4024☐☐0GKS11-4M☐☐☐090C32363.8661.5372926119.6-1.70.4
74E84AV☐☐☐4024☐☐0GKS11-4M☐☐☐090C32395.7871.4405728408.8-1.50.4
74E84AV☐☐☐4024☐☐0GKS11-4M☐☐☐090C32445.9581.3457132007.8-1.40.3
74E84AV☐☐☐4024☐☐0GKS11-4M☐☐☐090C32512.1961.1525036756.8-1.20.3
74E84AV☐☐☐4024☐☐0GKS11-4M☐☐☐090C32577.1221.0591541416.0-1.00.3
74E84AV☐☐☐4024☐☐0GKS14-4M☐☐☐090C32805.9011.3826057824.3-0.70.2
74E84AV☐☐☐4024☐☐0GKS14-4M☐☐☐090C32908.0581.2930765153.8-0.70.2
74E84AV☐☐☐4024☐☐0GKS14-4M☐☐☐090C32978.0711.11002570173.6-0.60.2
74E84AV☐☐☐4024☐☐0GKS14-4M☐☐☐090C321102.0521.01129579073.2-0.50.1
Lenze | V02-en_GB-03/20146.9 - 54
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐5524☐☐0GKS06-3M☐☐☐100C1211.3821.5161113310-5313
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1211.3782.9161113310-5313
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1217.2703.1244171204-358.5
66E84AV☐☐☐5524☐☐0GKS06-3M☐☐☐100C1217.8091.5252176198-348.3
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1225.2442.5357250140-245.8
66E84AV☐☐☐5524☐☐0GKS06-3M☐☐☐100C1226.0171.4368258136-235.7
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1228.2742.3400280125-215.2
66E84AV☐☐☐5524☐☐0GKS06-3M☐☐☐100C1228.4611.3403282124-215.2
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1231.8582.0451316111-194.6
66E84AV☐☐☐5524☐☐0GKS06-3M☐☐☐100C1232.0631.0454318110-194.6
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1236.0631.951035798-174.1
66E84AV☐☐☐5524☐☐0GKS06-3M☐☐☐100C1236.3031.051436097-174.1
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C1239.6624.056139389-153.7
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1244.1781.862543880-143.3
66E84AV☐☐☐5524☐☐0GKS06-3M☐☐☐100C1244.4710.962944179-143.3
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1250.3451.671349970-122.9
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1257.5011.481457061-102.6
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C1258.4563.182757960-102.5
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1264.7901.191764254-9.32.3
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C1265.8792.893265354-9.12.2
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1270.4741.199869850-8.52.1
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C1270.9822.6100570350-8.52.1
66E84AV☐☐☐5524☐☐0GKS07-3M☐☐☐100C1279.4070.9112478744-7.61.9
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C1279.9962.3113279344-7.51.8
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C1291.8602.0130091038-6.51.6
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C1291.7372.9129890938-6.51.6
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12100.5511.9139997935-6.01.5
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12103.5241.81465102634-5.81.4
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12103.3652.91463102434-5.81.4
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12111.4841.81578110532-5.41.3
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12111.3352.71576110332-5.41.3
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12113.3201.81577110431-5.31.3
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12123.2751.71715120129-4.91.2
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12125.6411.61778124528-4.81.2
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12125.4482.71776124328-4.81.2
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12125.0953.21741121828-4.81.2
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12140.9211.41995139625-4.31.0
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12138.9291.51933135325-4.31.1
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12140.7322.21992139425-4.31.0
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12140.9522.91961137325-4.31.0
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12151.0121.42101147123-4.01.0
6.9 - 55Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12153.2422.62132149223-3.91.0
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12158.8161.32248157422-3.80.9
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12158.5712.22244157122-3.80.9
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12170.1881.22368165821-3.50.9
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12172.6672.32402168220-3.50.9
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12182.0001.12576180319-3.30.8
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12186.5722.12641184919-3.20.8
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12201.8902.02809196618-3.00.7
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12205.1111.02903203217-2.90.7
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12204.5961.02847199317-2.90.7
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12210.2221.92975208317-2.90.7
66E84AV☐☐☐5524☐☐0GKS09-3M☐☐☐100C12220.8820.93126218816-2.70.7
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12226.4311.83205224316-2.70.7
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12227.4811.83165221616-2.60.7
74E84AV☐☐☐5524☐☐0GKS09-4M☐☐☐100C12230.5770.93208224615-2.60.6
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12255.1331.53611252814-2.40.6
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12248.1061.63452241614-2.40.6
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12279.5561.53890272313-2.20.5
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12286.2191.44051283612-2.10.5
66E84AV☐☐☐5524☐☐0GKS11-3M☐☐☐100C12322.5001.24565319511-1.90.5
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12322.9311.34493314511-1.90.5
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12321.7292.44476313311-1.90.5
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12363.8661.1506335449.7-1.70.4
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12362.5122.2504435319.7-1.70.4
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12390.6712.0543538059.0-1.50.4
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12395.7871.0550738558.9-1.50.4
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12440.1931.8612442878.0-1.40.3
74E84AV☐☐☐5524☐☐0GKS11-4M☐☐☐100C12445.9580.9620543437.9-1.40.3
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12513.1211.5713949976.9-1.20.3
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12578.1641.4804456316.1-1.00.3
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12622.7421.3866460655.7-1.00.2
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12701.6811.1976368345.0-0.90.2
74E84AV☐☐☐5524☐☐0GKS14-4M☐☐☐100C12805.9011.01121378494.4-0.70.2
Lenze | V02-en_GB-03/20146.9 - 56
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐7524☐☐0GKS06-3M☐☐☐100C3211.3821.1220154309-5313
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3211.3782.1220154309-5313
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3217.2702.2334234204-358.5
66E84AV☐☐☐7524☐☐0GKS06-3M☐☐☐100C3217.8091.1345241197-348.2
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3225.2441.8489342139-245.8
66E84AV☐☐☐7524☐☐0GKS06-3M☐☐☐100C3226.0171.0504353135-235.6
66E84AV☐☐☐7524☐☐0GKS06-3M☐☐☐100C3228.4610.9551386124-215.2
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3228.2741.7547383124-215.2
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3231.8581.4617432110-194.6
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C3235.1933.1681477100-174.2
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3236.0631.469848998-174.1
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C3239.6622.976853789-153.7
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3244.1781.385559980-143.3
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3250.3451.197568270-122.9
66E84AV☐☐☐7524☐☐0GKS07-3M☐☐☐100C3257.5011.0111377961-102.6
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C3258.4562.3113179260-102.5
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C3265.8792.0127589353-9.12.2
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C3270.9821.9137496250-8.52.1
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C3279.9961.71548108444-7.51.8
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C3291.8601.51778124538-6.51.6
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C3291.7372.11776124338-6.51.6
74E84AV☐☐☐7524☐☐0GKS09-4M☐☐☐100C32100.5511.41913133935-6.01.5
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C32103.5241.32004140334-5.81.4
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32103.3652.12001140134-5.81.4
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32102.1192.51943136034-5.91.4
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C32111.4841.32158151132-5.41.3
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32111.3352.02155150832-5.41.3
74E84AV☐☐☐7524☐☐0GKS09-4M☐☐☐100C32113.3201.32156150931-5.31.3
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32115.0632.52189153331-5.21.3
74E84AV☐☐☐7524☐☐0GKS09-4M☐☐☐100C32123.2751.22346164229-4.91.2
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C32125.6411.22432170228-4.81.2
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32125.4482.02428170028-4.81.2
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32125.0952.32380166628-4.81.2
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C32140.9211.02728190925-4.31.0
74E84AV☐☐☐7524☐☐0GKS09-4M☐☐☐100C32138.9291.12643185025-4.31.1
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32140.7321.62724190725-4.31.0
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32140.9522.12682187725-4.31.0
74E84AV☐☐☐7524☐☐0GKS09-4M☐☐☐100C32151.0121.02873201123-4.01.0
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32153.2421.92916204123-3.91.0
66E84AV☐☐☐7524☐☐0GKS09-3M☐☐☐100C32158.8161.03074215222-3.80.9
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32158.5711.63069214822-3.80.9
6.9 - 57Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32172.6671.73285230020-3.50.9
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32178.0723.23388237220-3.40.8
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32186.5721.63611252819-3.20.8
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32210.2221.44069284817-2.90.7
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32201.8901.53841268917-3.00.7
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32226.4311.34383306816-2.70.7
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32227.4811.34328303016-2.60.6
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32255.1331.14938345714-2.40.6
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32248.1061.24721330414-2.40.6
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32279.5561.15319372313-2.20.5
66E84AV☐☐☐7524☐☐0GKS11-3M☐☐☐100C32286.2191.05540387812-2.10.5
74E84AV☐☐☐7524☐☐0GKS11-4M☐☐☐100C32322.9310.96144430111-1.90.5
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32321.7291.86121428511-1.90.5
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32362.5121.6689748289.7-1.70.4
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32390.6711.5743352039.0-1.50.4
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32440.1931.3837558638.0-1.40.3
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32513.1211.1976368346.9-1.20.3
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32578.1641.01100077006.1-1.00.3
74E84AV☐☐☐7524☐☐0GKS14-4M☐☐☐100C32622.7420.91184882945.6-1.00.2
Lenze | V02-en_GB-03/20146.9 - 58
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1134☐☐0GKS07-3M☐☐☐112C2211.3781.4322206310-5313
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2216.1223.0456292219-379.1
66E84AV☐☐☐1134☐☐0GKS07-3M☐☐☐112C2217.2701.5488312204-358.5
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2217.5363.0496317201-348.4
66E84AV☐☐☐1134☐☐0GKS07-3M☐☐☐112C2225.2441.2714457140-245.8
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2225.6493.0725464138-235.7
66E84AV☐☐☐1134☐☐0GKS07-3M☐☐☐112C2228.2741.1799512125-215.2
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2229.2282.7826529121-215.0
66E84AV☐☐☐1134☐☐0GKS07-3M☐☐☐112C2231.8581.0901576111-194.6
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2232.9402.4931596107-184.5
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2235.1932.3995637100-174.2
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C2235.7413.1101064799-174.1
66E84AV☐☐☐1134☐☐0GKS07-3M☐☐☐112C2236.0631.0101965298-174.1
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2239.6622.0112171889-153.7
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C2240.2723.1113872988-153.7
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2243.1462.1122078182-143.4
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2248.6251.9137588073-123.0
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C2257.6832.51631104461-102.6
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2258.4561.61652105860-102.5
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2265.8791.41862119254-9.12.2
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C2264.9952.51837117654-9.22.3
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2270.9821.32007128450-8.52.1
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C2270.8872.12004128250-8.52.1
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2279.9961.22261144744-7.51.8
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C2279.8732.12258144544-7.51.8
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C2291.7371.62593166039-6.51.6
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C2290.5512.02560163839-6.61.6
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C2291.8601.02597166238-6.51.6
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C2297.4672.92708173336-6.21.5
74E84AV☐☐☐1134☐☐0GKS09-4M☐☐☐112C22100.5510.92794178835-6.01.5
74E84AV☐☐☐1134☐☐0GKS11-4M☐☐☐112C22102.1191.72838181635-5.91.4
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22102.0292.02884184635-5.91.4
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C22103.3651.62922187034-5.81.4
66E84AV☐☐☐1134☐☐0GKS09-3M☐☐☐112C22111.4840.93151201732-5.41.3
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C22111.3351.53147201432-5.41.3
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22109.8961.73106198832-5.51.3
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22109.8222.93052195332-5.51.3
74E84AV☐☐☐1134☐☐0GKS09-4M☐☐☐112C22113.3200.93149201531-5.31.3
74E84AV☐☐☐1134☐☐0GKS11-4M☐☐☐112C22115.0631.73197204631-5.21.3
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22119.4933.13320212530-5.01.2
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22123.8261.93500224029-4.91.2
6.9 - 59Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C22125.4481.53546227028-4.81.2
74E84AV☐☐☐1134☐☐0GKS11-4M☐☐☐112C22125.0951.63476222528-4.81.2
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22134.6402.93741239426-4.51.1
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C22140.7321.23978254625-4.31.1
74E84AV☐☐☐1134☐☐0GKS11-4M☐☐☐112C22140.9521.43917250725-4.31.0
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22138.9131.53927251325-4.31.1
74E84AV☐☐☐1134☐☐0GKS11-4M☐☐☐112C22153.2421.34258272523-3.91.0
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22156.5221.54424283223-3.80.9
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C22158.5711.24482286922-3.80.9
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22158.0392.54391281122-3.80.9
74E84AV☐☐☐1134☐☐0GKS11-4M☐☐☐112C22172.6671.24798307120-3.50.9
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22178.0722.24948316720-3.40.8
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C22186.5721.15274337519-3.20.8
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22186.5722.15274337519-3.20.8
74E84AV☐☐☐1134☐☐0GKS11-4M☐☐☐112C22201.8901.05610359018-3.00.7
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22193.7542.05384344618-3.10.8
66E84AV☐☐☐1134☐☐0GKS11-3M☐☐☐112C22210.2220.95942380317-2.90.7
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22210.2221.85942380317-2.90.7
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22226.4311.76401409616-2.70.7
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22218.3151.86066388216-2.80.7
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22237.4671.66598422315-2.50.6
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22255.1331.57212461614-2.40.6
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22267.5681.57435475813-2.20.6
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22286.2191.48091517812-2.10.5
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22321.7291.28940572211-1.90.5
66E84AV☐☐☐1134☐☐0GKS14-3M☐☐☐112C22322.5001.29116583411-1.90.5
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22362.5121.11007364479.7-1.70.4
74E84AV☐☐☐1134☐☐0GKS14-4M☐☐☐112C22390.6711.01085569489.0-1.50.4
Lenze | V02-en_GB-03/20146.9 - 60
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 15.00 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1534☐☐0GKS07-3M☐☐☐132C1211.3781.1435278313-5313
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1216.1222.2616394221-379.2
66E84AV☐☐☐1534☐☐0GKS07-3M☐☐☐132C1217.2701.1660422206-358.6
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1217.5362.2670429203-348.5
66E84AV☐☐☐1534☐☐0GKS07-3M☐☐☐132C1225.2440.9965618141-245.9
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1225.6492.2980627139-235.8
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1229.2282.01117715122-215.1
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1232.9401.81259806108-184.5
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1235.1931.71345861101-174.2
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1235.7413.11366874100-174.2
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1239.6621.5151697090-153.7
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1240.2722.9153998588-153.7
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1243.1461.61649105583-143.4
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1243.7833.01674107181-143.4
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1248.6251.41859118973-123.1
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1249.3332.71886120772-123.0
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1257.6832.32205141162-102.6
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1258.4561.22234143061-102.5
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1264.9952.12484159055-9.22.3
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1265.8791.02518161254-9.12.3
66E84AV☐☐☐1534☐☐0GKS09-3M☐☐☐132C1270.9821.02713173650-8.52.1
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1270.8871.92709173450-8.52.1
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1279.8731.73053195445-7.51.9
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C1291.7371.53506224439-6.51.6
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C1290.5512.83461221539-6.61.6
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C1297.4672.33662234437-6.21.5
74E84AV☐☐☐1534☐☐0GKS11-4M☐☐☐132C12102.1191.33837245635-5.91.5
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12102.0292.53900249635-5.91.5
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C12103.3651.33951252934-5.81.4
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C12111.3351.34255272332-5.41.3
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12109.8222.34126264132-5.51.4
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12109.8962.44200268832-5.51.4
74E84AV☐☐☐1534☐☐0GKS11-4M☐☐☐132C12115.0631.34323276731-5.21.3
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12119.4932.34490287330-5.01.2
74E84AV☐☐☐1534☐☐0GKS11-4M☐☐☐132C12125.0951.24700300829-4.81.2
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12123.8262.34733302929-4.91.2
66E84AV☐☐☐1534☐☐0GKS11-3M☐☐☐132C12125.4481.24795306928-4.81.2
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12138.9132.15309339826-4.31.1
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12134.6402.15059323826-4.51.1
74E84AV☐☐☐1534☐☐0GKS11-4M☐☐☐132C12140.9521.15296338925-4.31.1
74E84AV☐☐☐1534☐☐0GKS11-4M☐☐☐132C12153.2421.05758368523-3.91.0
6.9 - 61Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 15.00 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12156.5221.85983382923-3.81.0
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12158.0391.85938380023-3.80.9
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12178.0721.66690428220-3.40.8
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12186.5721.57131456419-3.20.8
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12193.7541.57280465918-3.10.8
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12210.2221.48035514217-2.90.7
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12226.4311.38655553916-2.70.7
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12218.3151.38202525016-2.80.7
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12237.4671.28922571015-2.50.6
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12255.1331.19752624114-2.40.6
74E84AV☐☐☐1534☐☐0GKS14-4M☐☐☐132C12267.5681.110053643413-2.20.6
66E84AV☐☐☐1534☐☐0GKS14-3M☐☐☐132C12286.2191.010940700112-2.10.5
Lenze | V02-en_GB-03/20146.9 - 62
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 18.50 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2216.1221.8760486221-379.2
66E84AV☐☐☐1834☐☐0GKS07-3M☐☐☐132C2217.2700.9814521206-358.6
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2217.5361.8827529203-348.5
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2225.6491.81209774139-235.8
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2228.0212.91321845127-215.3
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2229.2281.61378882122-215.1
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2231.5732.81488953113-194.7
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2232.9401.41553994108-184.5
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2235.1931.416591062101-174.2
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2235.7412.516851078100-174.2
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2239.6621.21870119790-153.7
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2240.2722.31898121588-153.7
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2243.1461.32034130283-143.4
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2243.7832.42064132181-143.4
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2248.6251.12292146773-123.1
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2249.3332.22326148872-123.0
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2257.6831.92719174062-102.6
66E84AV☐☐☐1834☐☐0GKS09-3M☐☐☐132C2258.4560.92756176461-102.5
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2264.9951.73064196155-9.22.3
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C2268.9423.03250208052-8.72.2
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2270.8871.53342213950-8.52.1
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C2277.6812.73662234446-7.71.9
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2279.8731.43765241045-7.51.9
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C2291.7371.24324276839-6.51.6
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C2290.5512.34269273239-6.61.6
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C2297.4671.94516289137-6.21.5
74E84AV☐☐☐1834☐☐0GKS11-4M☐☐☐132C22102.1191.04732302935-5.91.5
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22102.0292.14810307835-5.91.5
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C22103.3651.14873311934-5.81.4
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C22111.3351.15248335932-5.41.3
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22109.8221.85089325732-5.51.4
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22109.8961.95180331632-5.51.4
74E84AV☐☐☐1834☐☐0GKS11-4M☐☐☐132C22115.0631.05332341231-5.21.3
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22119.4931.85537354430-5.01.2
74E84AV☐☐☐1834☐☐0GKS11-4M☐☐☐132C22125.0950.95797371029-4.81.2
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22123.8261.95837373629-4.91.2
66E84AV☐☐☐1834☐☐0GKS11-3M☐☐☐132C22125.4481.05914378528-4.81.2
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22134.6401.76239399326-4.51.1
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22138.9131.76548419126-4.31.1
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22158.0391.57323468723-3.80.9
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22156.5221.57378472223-3.81.0
6.9 - 63Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 18.50 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22178.0721.38252528120-3.40.8
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22186.5721.28795562919-3.20.8
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22193.7541.28978574618-3.10.8
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22210.2221.19910634217-2.90.7
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22226.4311.010674683116-2.70.7
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22218.3151.110116647416-2.80.7
74E84AV☐☐☐1834☐☐0GKS14-4M☐☐☐132C22237.4671.011004704215-2.50.6
66E84AV☐☐☐1834☐☐0GKS14-3M☐☐☐132C22255.1330.912027769714-2.40.6
Lenze | V02-en_GB-03/20146.9 - 64
GKS helical-bevel gearboxesTechnical data
6.9
Selection tables
ƒ 120 Hz: PN = 22.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.9 ... 3550 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3216.1221.5906580220-379.2
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3217.5361.5986631202-348.4
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3225.6491.51442923138-235.8
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3228.0212.515751008127-215.3
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3229.2281.316431052122-215.1
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3231.5732.317751136112-194.7
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3232.9401.218521185108-184.5
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3235.1931.119781266101-174.2
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3235.7412.12009128699-174.1
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3239.6621.02230142790-153.7
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3240.2721.92264144988-153.7
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3243.1461.12426155282-143.4
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3243.7832.02461157581-143.4
66E84AV☐☐☐2234☐☐0GKS09-3M☐☐☐132C3248.6250.92734174973-123.0
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3249.3331.82773177572-123.0
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C3256.2512.93162202463-112.6
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3257.6831.63243207562-102.6
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C3263.3822.73563228056-9.52.3
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3264.9951.43654233855-9.22.3
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C3268.9422.53876248052-8.72.2
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3270.8871.33985255050-8.52.1
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C3277.6812.24367279546-7.71.9
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3279.8731.14490287444-7.51.9
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C3291.7371.05157330139-6.51.6
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C3290.5511.95090325839-6.61.6
74E84AV☐☐☐2234☐☐0GKS14-4M☐☐☐132C3297.4671.65386344736-6.21.5
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C32102.0291.75736367135-5.91.5
66E84AV☐☐☐2234☐☐0GKS11-3M☐☐☐132C32111.3350.96259400632-5.41.3
74E84AV☐☐☐2234☐☐0GKS14-4M☐☐☐132C32109.8221.56069388432-5.51.4
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C32109.8961.66178395432-5.51.4
74E84AV☐☐☐2234☐☐0GKS14-4M☐☐☐132C32119.4931.56603422630-5.01.2
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C32123.8261.66961445529-4.91.2
74E84AV☐☐☐2234☐☐0GKS14-4M☐☐☐132C32134.6401.47440476226-4.51.1
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C32138.9131.47809499826-4.31.1
74E84AV☐☐☐2234☐☐0GKS14-4M☐☐☐132C32158.0391.28733558923-3.80.9
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C32156.5221.38799563123-3.81.0
74E84AV☐☐☐2234☐☐0GKS14-4M☐☐☐132C32178.0721.19840629820-3.40.8
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C32186.5721.010488671319-3.20.8
74E84AV☐☐☐2234☐☐0GKS14-4M☐☐☐132C32193.7541.010707685218-3.10.8
66E84AV☐☐☐2234☐☐0GKS14-3M☐☐☐132C32210.2220.911818756317-2.90.7
6.9 - 65Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-3M H☐R
Lenze | V02-en_GB-03/20146.9 - 66
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k441419399GKS04
521461439419GKS05627577517495475GKS06
776684683633573GKS07847755754704GKS09938846845GKS111037945GKS14
p1)oh1h1)a
1712037110020GKS04
2052328012523GKS05
25029110015028GKS06
31035412019034GKS07
38642915023641GKS09
48552718530054GKS11
60563623037567GKS14
s1f1e1b1a1i1tul1l1)d1d
H7+0,2JS9H7
M6x12390751042.52.5
28.333.3
88
100100
115115
4545
2530
GKS04
M8x1541008011844
33.338.3
810
124124
140140
5050
3035
GKS05
M10x16412010014055
43.348.8
1214
140140
160160
6565
4045
GKS06
M12x18514011516555
53.859.3
1416
175175
200200
7575
5055
GKS07
M16x24617514520555
64.474.9
1820
210210
240240
9595
6070
GKS09
M20x32420517024066
74.985.4
2022
250250
290290
108108
7080
GKS11
M24x3562501702907106.428305350135100GKS14
s5nmf6f5e5c5b7b6b5a6a5
9222114113210514851191104545GKS04
1129211691441151710514011547.547.5GKS05
143623206191145201201701556060GKS06
184528255235180251502101907070GKS07
226037326300222301852662409090GKS09
26734339836327040225325290105105GKS11
33825249744232850275415360135135GKS14
k2 !1)
6.9 - 67Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-3M HAK
Lenze | V02-en_GB-03/20146.9 - 68
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k441419399GKS04
521461439419GKS05627577517495475GKS06
776684683633573GKS07847755754704GKS09938846845GKS111037945GKS14
qp1)ok8h1h1)a
9117120338.57110020GKS04
103.5205232408012523GKS05
121.52502914910015028GKS06
155.531035465.512019034GKS07
180.538642969.515023641GKS09
205.548552770.518530054GKS11
235.560563671.523037567GKS14
s2f2e2c2b2a2o11)i2tul1ld1d
j7+0,2JS9H7
4 x 93.513010110160148.5148.5
33.533.5
28.333.3
88
100100
115115
4545
2530
GKS04
4 x 11416512130200173.5173.5
3333
33.338.3
810
124124
140140
5050
3035
GKS05
4 x 114 x 14
3.54
165215
1215
180130
200250
201.5201.5
4241
43.348.8
1214
140140
160160
6565
4045
GKS06
4 x 144 x 14
44
215265
1517
180230
250300
255.5255.5
5555
53.859.3
1416
175175
200200
7575
5055
GKS07
4 x17.5
430018250350300.5300.5
6060
64.474.9
1820
210210
240240
9595
6070
GKS09
4 x17.55
5350400
2022
300350
400450
350.5350.5
6060
74.985.4
2022
250250
290290
108108
7080
GKS118 x17.58 x17.5
540022350450410.560106.428305350135100GKS14
k2 !1)
6.9 - 69Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-3M V☐R
Lenze | V02-en_GB-03/20146.9 - 70
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k441419399GKS04
521461439419GKS05627577517495475GKS06
776684683633573GKS07847755754704GKS09938846845GKS111037945GKS14
qp1)oh1h1)a
107.51712037110020GKS04
1302052328012523GKS05
16025029110015028GKS06
20031035412019034GKS07
24038642915023641GKS09
30548552718530054GKS11
37560563623037567GKS14
s1f1e1b1a1o11)i1tul2l1ld2d1dd
H7m6k6
M6x1239075104162.552.528840650M104525GKS04
M8x15410080118196.56433845660M104530GKS05
M10x164120100140235.585431263780M166540GKS06
M12x185140115165295.510553.514808100M167550GKS07
M16x246175145205355.512564181008120M209560GKS09
M20x324205170240444.5166852212515160M2010880GKS11
M24x356250170290543.52071062816018200M24135100GKS14
s5nmf6f5e5c5b7b6b5a6a5
9222114113210514851191104545GKS04
1129211691441151710514011547.547.5GKS05
143623206191145201201701556060GKS06
184528255235180251502101907070GKS07
226037326300222301852662409090GKS09
26734339836327040225325290105105GKS11
33825249744232850275415360135135GKS14
k2 !1)
6.9 - 71Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-3M VAK
Lenze | V02-en_GB-03/20146.9 - 72
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k441419399GKS04
521461439419GKS05627577517495475GKS06
776684683633573GKS07847755754704GKS09938846845GKS111037945GKS14
qp1)ok8h1h1)a
9117120338.57110020GKS04
103.5205232408012523GKS05
121.52502914910015028GKS06
155.531035465.512019034GKS07
180.538642969.515023641GKS09
205.548552770.518530054GKS11
235.560563671.523037567GKS14
s2f2e2c2b2a2o11)i2tul2l1ld2dd
j7m6k6
4 x 93.513010110160195.55028840650M1025GKS04
4 x 11416512130200229.56033845660M1030GKS05
4 x 14421515180250276.580431263780M1640GKS06
4 x 144 x 14
44
215265
1517
180230
250300
350.510053.514808100M1650GKS07
4 x17.5
430018250350415.512064181008120M2060GKS09
4 x17.55
5350400
2022
300350
400450
504.5160852212515160M2080GKS118 x17.58 x17.5
540022350450603.52001062816018200M24100GKS14
k2 !1)
6.9 - 73Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-4M H☐R
080C42080C32071C32063C32071C42063C42
156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k495GKS05
611588568GKS06678655635GKS07767744724GKS09877GKS11
Lenze | V02-en_GB-03/20146.9 - 74
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32132C22100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k737GKS07
877876826GKS091079987986936GKS11
1212112011191069GKS14
poh1ha
2052268012513GKS05
2502881001508GKS06
310350.512019011GKS07
38642615023615GKS09
48552318530016GKS11
60563223037522GKS14
s1f1e1b1a1i1tul1ld1d
H7+0,2JS9H7
M8x1541008011844
33.338.3
810
124124
140140
5050
3035
GKS05
M10x16412010014055
43.348.8
1214
140140
160160
6565
4045
GKS06
M12x18514011516555
53.859.3
1416
175175
200200
7575
5055
GKS07
M16x24617514520555
64.474.9
1820
210210
240240
9595
6070
GKS09
M20x32420517024066
74.985.4
2022
250250
290290
108108
7080
GKS11
M24x3562501702907106.428305350135100GKS14
s5nmf6f5e5c5b7b6b5a6a5
1129211691441151710514011547.547.5GKS05
143623206191145201201701556060GKS06
184528255235180251502101907070GKS07
226037326300222301852662409090GKS09
26734339836327040225325290105105GKS11
33825249744232850275415360135135GKS14
6.9 - 75Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-4M HAK
080C42080C32071C32063C32071C42063C42
156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k495GKS05
611588568GKS06678655635GKS07767744724GKS09877GKS11
Lenze | V02-en_GB-03/20146.9 - 76
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32132C22100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k737GKS07
877876826GKS091079987986936GKS11
1212112011191069GKS14
qpok8h1ha
103.5205226408012513GKS05
121.5250288491001508GKS06
155.5310350.565.512019011GKS07
180.538642669.515023615GKS09
205.548552370.518530016GKS11
235.560563271.523037522GKS14
s2f2e2c2b2a2o1i2tul1ld1d
j7+0,2JS9H7
4 x 11416512130200173.5173.5
3333
33.338.3
810
124124
140140
5050
3035
GKS05
4 x 114 x 14
3.54
165215
1215
180130
200250
201.5201.5
4241
43.348.8
1214
140140
160160
6565
4045
GKS06
4 x 144 x 14
44
215265
1517
180230
250300
255.5255.5
5555
53.859.3
1416
175175
200200
7575
5055
GKS07
4 x17.5
430018250350300.5300.5
6060
64.474.9
1820
210210
240240
9595
6070
GKS09
4 x17.55
5350400
2022
300350
400450
350.5350.5
6060
74.985.4
2022
250250
290290
108108
7080
GKS118 x17.58 x17.5
540022350450410.560106.428305350135100GKS14
6.9 - 77Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-4M V☐R
080C42080C32071C32063C32071C42063C42
156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k495GKS05
611588568GKS06678655635GKS07767744724GKS09877GKS11
Lenze | V02-en_GB-03/20146.9 - 78
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32132C22100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k737GKS07
877876826GKS091079987986936GKS11
1212112011191069GKS14
qpoh1ha
1302052268012513GKS05
1602502881001508GKS06
200310350.512019011GKS07
24038642615023615GKS09
30548552318530016GKS11
37560563223037522GKS14
s1f1e1b1a1o1i1tul2l1ld2d1dd
H7m6k6
M8x15410080118196.56433845660M104530GKS05
M10x164120100140235.585431263780M166540GKS06
M12x185140115165295.510553.514808100M167550GKS07
M16x246175145205355.512564181008120M209560GKS09
M20x324205170240444.5166852212515160M2010880GKS11
M24x356250170290543.52071062816018200M24135100GKS14
s5nmf6f5e5c5b7b6b5a6a5
1129211691441151710514011547.547.5GKS05
143623206191145201201701556060GKS06
184528255235180251502101907070GKS07
226037326300222301852662409090GKS09
26734339836327040225325290105105GKS11
33825249744232850275415360135135GKS14
6.9 - 79Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Dimensions
GKS☐☐-4M VAK
080C42080C32071C32063C32071C42063C42
156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k495GKS05
611588568GKS06678655635GKS07767744724GKS09877GKS11
Lenze | V02-en_GB-03/20146.9 - 80
GKS helical-bevel gearboxesTechnical data
6.9
132C32132C12112C22100C12090C32132C22100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k737GKS07
877876826GKS091079987986936GKS11
1212112011191069GKS14
qpok8h1ha
103.5205226408012513GKS05
121.5250288491001508GKS06
155.5310350.565.512019011GKS07
180.538642669.515023615GKS09
205.548552370.518530016GKS11
235.560563271.523037522GKS14
s2f2e2c2b2a2o1i2tul2l1ld2dd
j7m6k6
4 x 11416512130200229.56033845660M1030GKS05
4 x 14421515180250276.580431263780M1640GKS06
4 x 144 x 14
44
215265
1517
180230
250300
350.510053.514808100M1650GKS07
4 x17.5
430018250350415.512064181008120M2060GKS09
4 x17.55
5350400
2022
300350
400450
504.5160852212515160M2080GKS118 x17.58 x17.5
540022350450603.52001062816018200M24100GKS14
6.9 - 81Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesTechnical data
6.9
Lenze | V02-en_GB-03/20146.9 - 82
GKS helical-bevel gearboxesTechnical data
6.9
Hollow shaft with shrink disc
l4l1lk11k10k9i1g4g3g2d
h6
261221421541481502.57679722530
GKS04
281481681791741764.084908035GKS05
30164194204200202
5.0
941009040GKS06
2619223224423824111612411050GKS07
3022827828728528814715914165GKS09
422383383493443476.017619117080GKS11
553074074214154187.0221253215100GKS14
ƒ Output flange and hollow shaft with shrink disc (output versionSAK) are not possible in the same location. For additional dimen-sions see output version H☐☐.
ƒ Ensure that the strength of the machine shaft material is ad-equate in shrink disc designs.When using typical steels, e.g. C45, 42CrMo4, the torques listedin the selection tables can be used without restriction.Please consult us if you wish to use material that is considerablyweaker. Medium surface roughness Rz must not exceed 15 µm(turning is sufficient).
6.9 - 83Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesAccessories
6.9
Mounting set for hollow shaft circlip:Proposed design for auxiliary tools
l8, maxc9c8c7l9d2l1d
H7
85
310
5
40M10100
2530
GKS04
6
1071243035
GKS0512750M12
118416
8
60M16140
4045
GKS069
148
5
10175
5055
GKS07
20
11
80M20182
13210
6070
GKS09
14
22162507080
GKS1116
27082420100M24305100GKS14
Lenze | V02-en_GB-03/20146.9 - 84
GKS helical-bevel gearboxesAccessories
6.9
Hoseproof hollow shaft cover
ƒ Cover including gasket
g3k12k11
9GKS04
10GKS05
11GKS06
GKS07
15954GKS09
19167GKS11
25380GKS14
6.9 - 85Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesAccessories
6.9
Gearboxes with 2nd output shaft end
o1i1ldd
m6k6
21552.55025GKS04
26064.06030GKS05
32085.08040GKS06
400105.010050GKS07
480125.012060GKS09
610166.016080GKS11
750207.0200100GKS14
Lenze | V02-en_GB-03/20146.9 - 86
GKS helical-bevel gearboxesAccessories
6.9
Torque plate on threaded pitch circle
In position 3
In position 5
k6Ddb4a9a8a7a4
16351234.526.513024.030GKS04
15451638.527.516023.534GKS05
18502044.533.020028.040GKS06
21652550.537.525032.546GKS07
6.9 - 87Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesAccessories
6.9
Torque plate at housing foot
In position 2, 4 or 6
k7e5Ddcb8a9a8a7a4
20100301114.560135.010627.541GKS04
25127401315.070160.011535.045GKS05
28145501727.080195.014540.072GKS06
35180602128.0100240.017050.078GKS07
46222722629.0120300.021460.086GKS09
55270923130.0
145375.026072.594GKS11
7032811039180465.032085.0100GKS14
Lenze | V02-en_GB-03/20146.9 - 88
GKS helical-bevel gearboxesAccessories
6.9
Ventilations
Position of ventilation, sealing elements and oil level check
GKS05…14-3
Item 1 standardA to FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GKS05-3M☐☐☐ 090C☐☐◒ Oil control plug • GKS05-3M☐☐☐ 100C☐☐* On both sides • GKS06-3M☐☐☐ 112C☐☐** On opposite side • GKS07-3M☐☐☐ 160C☐☐
6.9 - 89Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesAccessories
6.9
Ventilations
Position of ventilation, sealing elements and oil level check
GKS05…14-4
Item 1 standardA to FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GKS07-4M☐☐☐ 090C☐☐◒ Oil control plug • GKS07-4M☐☐☐ 100C☐☐* On both sides • GKS09-4M☐☐☐ 112C☐☐** On opposite side
Lenze | V02-en_GB-03/20146.9 - 90
GKS helical-bevel gearboxesAccessories
6.9
Ventilations
Compensation reservoir for mounting position C
GKS☐☐-3
160132112090Motor180100225
o6o5o6o5o6o5o6o5[mm][mm][mm][mm][mm][mm][mm][mm]
533297533282533265533243GKS09
630318630304630280626258GKS11
739343739343739313GKS14
ƒ Terminal box position 4 not permitted.
6.9 - 91Lenze | V02-en_GB-03/2014
GKS helical-bevel gearboxesAccessories
6.9
Lenze | V02-en_GB-03/20146.9 - 92
GKS helical-bevel gearboxesAccessories
6.9
GSS helical-wormgearboxes0.55 ... 15 kW
Gearboxes
6.10 - 4List of abbreviationsGeneral information
6.10 - 5Product key
6.10 - 7Product information
6.10 - 8Functions and features
6.10 - 13Dimensioning
6.10 - 18Notes on ordering
6.10 - 19Ordering details checklist
6.10 - 23Permissible radial and axial forces at outputTechnical data
6.10 - 26Moments of inertia
6.10 - 30Efficiencies
6.10 - 37Weights
6.10 - 43Selection tables
6.10 - 62Dimensions
6.10 - 79Hollow shaft with shrink discAccessories
6.10 - 80Mounting set for hollow shaft circlip: Proposed design forauxiliary tools
6.10 - 81Hoseproof hollow shaft cover
6.10 - 81Gearboxes with 2nd output shaft end
6.10 - 82Torque plate on threaded pitch circle
6.10 - 83Torque plate at housing foot
6.10 - 84Ventilations
GSS helical-worm gearboxesContents
6.10
List of abbreviations
Communauté EuropéenneCEEfficiencyηc=1Canadian Standards AssociationCSALoad capacitycDeutsches Institut für Normung e.V.DINRated frequency[Hz]fNElectromagnetic compatibilityEMCMax. axial force[N]Fax,maxEuropean standardENMax. radial force[N]Frad,maxInternational Electrotechnical CommissionIECSite altitude[m]HmaxInternational Mounting CodeIMRatioiInternational Protection CodeIPMoment of inertia[kgcm²]JNational Electrical Manufacturers AssociationNEMAMass[kg]mUnderwriters Laboratory Listed ProductULOutput torque[Nm]M2Underwriters Laboratory Recognized ProductUROutput speed[r/min]n2Verband deutscher Elektrotechniker (Associationof German Electrical Engineers)
VDERated speed[r/min]nNRated power[kW]PN
China Compulsory CertificateCCCTransition operating frequency[1/h]ShüCertificate for Russian FederationGOSTMax. ambient operating temperature[°C]Topr,maxCombined certification marks of UL for the USAand Canada
cURusMin. ambient operating temperature[°C]Topr,minRated voltage[V]UN, Δ
Certificate for UkraineUkrSEPRORated voltage[V]UN, Y
V00-en_GB-12/20136.10 - 4
GSS helical-worm gearboxesGeneral information
6.10
Product key
6.10 - 5V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Product key
Mounting position (A...F) and position of system blocks (1...6)
Without flange: 0Hollow shaft: 0Flange: 3, 5, 8 (3+5)Solid shaft: 3, 5, 8 (3+5)Terminal box / motec: 2, 3, 4, 5Hollow shaft with shrink disc: 3, 5
Gearbox designs
OptionsBasic versions
Standard efficiencyMotor efficiency OKS-S (special paint according to RAL)Surface and corrosionprotection OKS-M (special paint according to RAL)Increased efficiency (IE2)
OKS-L (special paint according to RAL)OKS-G (primer: grey)OKS-S (paint: RAL 7012)
Surface and corrosionprotection CLP HC 220 USDA H1 (synthetic)Lubricant
CLP PG 460 (synthetic)Lubricant Driven shaft: VitonShaft sealing rings
Torque plate on threaded pitch circleAccessoriesOil control plugs for GSS05 ... 07VentilationBreather elements for GSS05 … 07 Housing foot torque plate
2nd output shaft endShrink disc coverHoseproof hollow shaft coverMounting set for hollow shaft circlip
Metal nameplate (supplied loose)NameplateAdhesive nameplate (supplied loose)
V00-en_GB-12/20136.10 - 6
GSS helical-worm gearboxesGeneral information
6.10
Product information
DesignsLenze provides a geared motor construction kit, which covers a widerangeof requirements. Numerous drive-side andoutput-side optionsenable precise adaptationof thedrive to the specific application. This • 2-stage and 3-stage gearboxesis the basis for versatile applications and functional scalability of ourgearboxes and geared motors.
• Hollow shaft with keyway or shrink disc• Solid shaft with keyway
The modular concept and high power density make extremely com-pact sizespossible.Optimised teethprofiles andgroundgears ensure
• Foot or flange mounting• Torque plate, including rubber buffer
low-noise operation and lowbacklash. The gearboxes are of compactand hence space-saving construction.
• With MF three-phase AC motors (inverter-optimised)power range 0.55 … 15 kW
A low noise solution
Helicalwormgearboxes are particularly low-noise drive components.They create a compact drive unit in combination with our servo mo-tors. The helical worm gearboxes are designed in 2- and 3-stage ver-sions and can reach a torque of up to 1,250 Nm and a ratio of up toi=1847.
Inverters for motor-proximity installation
The Drive Package with decentralised Inverter Drives 8400 moteccovers a power range up to 7.5 kW.
Helical-bevel geared motor GSS07-2M HBR 100-32
6.10 - 7V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Functions and features
Gearbox type
GSSHousing
CuboidDesign
Aluminium / cast ironMaterialSolid shaft
with keyway to DIN 6885Design
m6 (d > 50 mm)Tolerancek6 (d ≤ 50 mm)
Tempered steel C45 or 42CrMo4MaterialHollow shaft
H: with keywayDesignS: smooth
Bore H7Tolerance
Tempered steel C45MaterialToothed parts
Optimised tooth flanks and profile geometryDesignGround tooth flanks
Case-hardened steel, bronze (worm gear only)MaterialShaft-hub joint
1st stage/prestage/helical (bevel) gearbox: Friction-type connectionOutput stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection
Shaft sealing rings
With dust lipDesign
NB / FPMaterialBearing
Ball bearing / tapered-roller bearing depending on size and designDesignLubricants
DIN 51502Standard
corresponding to mounting position (see operating instructions)QuantitiesMechanical efficiency
1-stage gearboxes [ηc=1]0.62 ... 0.92 1)2-stage gearboxes [ηc=1]0.64 ... 0.92 1)3-stage gearboxes [ηc=1]
4-stage gearboxes [ηc=1]Dependent on transmission ratioNotes
Housing at operating temperature and teeth run in
1) Efficiencies depending on ratio30 -
V00-en_GB-12/20136.10 - 8
GSS helical-worm gearboxesGeneral information
6.10
Functions and features
Lubricants
Lenze gearboxes and gearedmotors are ready for operation on deliv-ery and are filled with lubricants specific to both the drive and thedesign. The mounting position and design specified in the order arekey factors in choosing the volume of lubricant.
The lubricants listed in the lubricant table are approved for use inLenze drives.
Lubricant table
Mode
CLP HC 220CLP PG 460USDA H1
-20 … +40Ambient temperature [°C]Synthetic-based oil (synthetic hydrocarbon / poly-
alpha-olefin oil)Synthetic-based oil (polyglycol)Specification
For food processing industryCannot be mixed with other oil types.Note16000 operating hours25000 operating hoursChanging interval
not later than after three years (oil temperature70...80 °C)
not later than after three years (oil temperature70...80 °C)
bremer & leguilFuchsCassida Fluid GL 220
KlüberoilKlübersynthKlüber4 UH1-220 NGH 6-460
Shell TivelaShellS 460
ƒ Please contact your Lenze office if you are operating at ambienttemperatures in areas up to < -20 °C > or up to +40°C.
ƒ Caution: when using the lubricant CLP HC 220with the GSS hel-ical-worm gearbox, the load capacity c is reduced to 80 % of thevalues stated in the catalogue.
6.10 - 9V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Functions and features
Surface and corrosion protection
Various surface coatings combined with other protective measuresensure that the geared motors operate reliably even at high air hu-
Foroptimumprotectionofgearedmotors against ambient conditions,the surface and corrosion protection system (OKS) offers tailor-madesolutions. midity, in outdoor installations or in the presence of atmospheric
impurities. Any colour from the RAL Classic collection can be chosenfor the top coat. The geared motors are also available unpainted (nosurface and corrosion protection).
MeasuresApplicationsSurface and corrosion protec-tion system
Catalogue textCatalogue text
OKS-G(primed)
•
•
1K priming coat (grey)
Dependent on subsequenttop coat applied
• Zinc-coated screws• Rust-free breather elementsOptional measures• Stainless steel nameplate
OKS-S(small)
••
Surface coating as per corrosivity category C1 (in line with EN 12944-2)Standard applications
• Internal installation inheatedbuildings
• Zinc-coated screws
••
Air humidity up to 90%Rust-free breather elements
Optional measures• Stainless steel nameplate
OKS-M(medium)
•
•
Surface coating as per corrosivity category C2 (in line with EN 12944-2)
Internal installation in non-heated buildings
•
•
Zinc-coated screws
Covered, protected externalinstallation
• Rust-free breather elementsOptional measures
• Air humidity up to 95%• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)
OKS-L(high)
•
•
Surface coating as per corrosivity category C3 (in line with EN 12944-2)
External installation• Air humidity above 95%
•
•
Blower cover and B end shield additionally primed
Chemical industry plants•
•
Food industry
Cable glands with gaskets• Corrosion-resistant brake with cover ring, stainless friction plate, andchrome-plated armature plate (on request)
• All screws/screw plugs zinc-coated• Stainless breather elements• Threaded holes that are not used are closed by means of plastic plugsOptional measures• Sealed recesses on motor (on request)• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)• Additional priming coat on cast iron fan• Oil expansion tank and torque plates painted separately and suppliedloose
V00-en_GB-12/20136.10 - 10
GSS helical-worm gearboxesGeneral information
6.10
Functions and features
Structure of surface coating
ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system
StructureDIN EN ISO 12944-2
Dipping primed gearboxWithout OKS(uncoated)
Dipping primed gearbox1K priming coat
OKS-G(primed)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-PUR top coat
C1OKS-S(small)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox1K priming coatC2
OKS-M(medium)
2K-PUR top coat
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-EP priming coatC3
OKS-L(high)
2K-PUR top coat
6.10 - 11V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Functions and features
Ventilation
Gearboxes without ventilationNo ventilation is required for gearbox GSS04.
Gearboxes with ventilationGearboxes GSS05 ... 07 are supplied with breather elements asstandard.
V00-en_GB-12/20136.10 - 12
GSS helical-worm gearboxesGeneral information
6.10
Dimensioning
General information about the data provided in this catalogue
Powers, torques and speedsThe powers, torques and speeds specified in this catalogue are roun-ded values and are valid under the following conditions:• Operating time/day = 8 h (100% OT)• Duty class I for up to 10 switching operations/h• Mounting positions and designs in this catalogue• Standard lubricant• Tamb = 20 °C for gearboxes,Tamb = 40 °C for motors (in accordance with EN 60034)
• Site altitude < = 1000 m amsl• The selection tables provide the permissible mechanical powersand torques. For notes on the thermal power limit, see chapterdrive dimensioning.
• The rated power specified for motors and geared motors appliesto operating mode S1 (in accordance with EN 60034).
Under different operating conditions, the values obtained may varyfrom those listed here.In the case of extreme operating conditions, please consult yourLenze sales office.
6.10 - 13V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Dimensioning
Thermal power limit
The thermal power limit is affected by:The thermal power limit, defined by the heat balance, limits the per-missible gearbox continuous power. It may be less than themechan-ical power ratings listed in the selection tables.
• the churning losses in the lubricant. These are determined by themounting position and the circumferential speed of the wheels
• the load and the speed• the ambient conditions: temperature, air circulation, input or dis-sipation via shafts and the foundation
Please consult your Lenze subsidiary• if the following input speeds n 1 are exceeded on a continuousbasis (continuous is defined as more than 8 h/day):
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min3000 r/min063 ... 100
1500 r/min3000 r/min112 ... 132
1500 r/min2000 r/min160 ... 225
• if the following input speeds n 1 are exceeded:
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min4000 r/min063 ... 100
2000 r/min4000 r/min112 ... 132
1500 r/min3000 r/min160 ... 225
Possible ways of extending the application area
• synthetic lubricant (option)• shaft sealing rings made from FP material/Viton (option)• reduction in lubricant quantity• cooling of the geared motor by means of air convection on themachine/system
V00-en_GB-12/20136.10 - 14
GSS helical-worm gearboxesGeneral information
6.10
Dimensioning
Load capacity and application factor
Application factor k (according to DIN 3990)Load capacity c of gearboxTakes into account the influence of temporally variable loads whichare actually present during the anticipated operating time of gear-boxes and geared motors.
Rated value for the load capacity of Lenze geared motors.• c is the ratio of the permissible rated torque of the gearbox to therated torque supplied by the drive component (e.g. the built-inLenze motor). k is determined by:
• The value of cmust always be greater than the value of the applic-ation factor k calculated for the application.
• the type of load• the load intensity• temporal influences
Load typeDuty class
Smooth operation, small or light joltsI
Uneven operation, average joltsII
Uneven operation, severe jolts and/or alternating loadIII
Application factor k
6.10 - 15V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Dimensioning
Torque derating at lowmotor frequencies
Motor size-dependent torque reduction, taking into account thethermal response during operation on the inverter.
Torque characteristics
A = Operation with integral fan and brakeB = Operation with integral fan and brake control "Holding currentreduction"
ƒ Themotor specifications stated in this catalogue for inverter op-eration apply to operationwith a Lenze inverter. If you are uncer-tain, get in touch with the manufacturer of the inverter to askwhether thedevice is capableof driving themotorwith the statedspecifications (e.g. setting range, base frequency).
You can use the Drive Solution Designer for precise drive dimension-ing.
The Drive Solution Designer helps you to carry out a fast and high-quality drive dimensioning.The software includes well-founded and proven knowledge on driveapplications and electro-mechanical drive components.
Please contact your Lenze sales office.
V00-en_GB-12/20136.10 - 16
GSS helical-worm gearboxesGeneral information
6.10
Dimensioning
Notes on the selection tables
The selection tables show the available combinations of gearboxtype, number of stages, ratio and motor. The following legend indic-ates the structure of the selection tables.
6.10 - 17V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Notes on ordering
Wewant to be sure that you receive the correct products in goodtime.
To allow us to achieve this we need:• your address and your company data• our product key for the individual products in this catalogue• your delivery date and delivery address
Ordering procedurePlease use the ordering information checklist to ensure that youprovide all the ordering information required for the various products.
Theordering information checklist, theproduct key, thebasic versions,options, mounting position and position of the system blocks will befound in the General – Product key section.
A list of Lenze's worldwide sales offices can be found on the Internet:www.Lenze.com.
V00-en_GB-12/20136.10 - 18
GSS helical-worm gearboxesGeneral information
6.10
Ordering details checklist
6.10 - 19V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Ordering details checklist
V00-en_GB-12/20136.10 - 20
GSS helical-worm gearboxesGeneral information
6.10
Ordering details checklist
Three-phase AC motors options
6.10 - 21V00-en_GB-12/2013
GSS helical-worm gearboxesGeneral information
6.10
Ordering details checklist
Three-phase AC motors options
V00-en_GB-12/20136.10 - 22
GSS helical-worm gearboxesGeneral information
6.10
Permissible radial and axial forces at output
Permissible axial forcePermissible radial forceFax,per = Fax,max if Frad = 0Frad,per = min(fw x fα x Frad,max ; fw x Frad,max at n2 ≤ 16 r/min)
If Frad and Fax ≠ 0; please contact Lenze.
Application of forces
Effective direction factor fα at output shaft
——— Direction of rotation R——— Direction of rotation L
6.10 - 23V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Permissible radial and axial forces at output
Additional load factor fw at output shaft
— ּ — Hollow shaft (H☐☐)——— Solid shaft (V☐☐)——— Solid shaft with flange (V☐K)
GSS☐☐-2/3☐ H☐☐
n2 [r/min]Size
≤16254063100160250400630Gearbox
Max. radial force, Hollow shaft
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N]
600060006000600053004500380030002800GSS04
750075007000600051004300360032003000GSS05
11500107009100770066005600480046004400GSS06
1600014800121001000082006700560051004600GSS07
Max. axial force, Hollow shaft
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N]
550055005500550049004200370029002200GSS04
600060006000550044003500280022001600GSS05
900090008200650052004100320025001900GSS06
12500125009500720055004100310024001800GSS07
ƒ Application of force Frad: at hollow shaft end face (x = 0)ƒ Fax,max only valid with Frad = 0ƒ Neither radial nor axial forces are permissible for thehollow shaft
with shrink disc (S☐☐).
V00-en_GB-12/20136.10 - 24
GSS helical-worm gearboxesTechnical data
6.10
Permissible radial and axial forces at output
GSS☐☐-2/3☐ V☐R
n2 [r/min]Size
≤16254063100160250400630Gearbox
Max. radial force, Solid shaft without flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N]
420042004200420041003500300024002200GSS04
430043004300430040003400290025002300GSS05
850082006900590050004200360035003400GSS06
12000113009300770063005100420040003700GSS07
Max. axial force, Solid shaft without flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N]
550055005500550049004200370029002200GSS04
600060006000550044003500280022001600GSS05
900090008200650052004100320025001900GSS06
12500125009500720055004100310024001800GSS07
GSS☐☐-2/3☐ V☐K
n2 [r/min]Size
≤16254063100160250400630Gearbox
Max. radial force, Solid shaft with flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N]
470047004700470047004400410030002750GSS04
490049004900490049004900490037503450GSS05
940094009400940094008100700052505100GSS06
14000140001400012400106009100790060005500GSS07
Max. axial force, Solid shaft with flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N]
420042004200420042004000350028002100GSS04
550055005500490040003100250020001500GSS05
880088007300570045003500280022001600GSS06
10000100008000590043003200240019001400GSS07
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
6.10 - 25V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Moments of inertia
GSS☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GSS05GearboxGSS04Gearbox1.120[kgcm²]J5.639 2.821[kgcm²]J5.639
1.664[kgcm²]J7.7330.652[kgcm²]J7.7330.809[kgcm²]J9.042 2.014[kgcm²]J9.042
1.102[kgcm²]J9.8970.430[kgcm²]J9.8970.368[kgcm²]J10.827 0.941[kgcm²]J10.827
1.235[kgcm²]J12.4000.487[kgcm²]J12.4000.247[kgcm²]J13.810 0.638[kgcm²]J13.810
0.840[kgcm²]J15.8690.329[kgcm²]J15.8690.284[kgcm²]J17.360 0.722[kgcm²]J17.360
1.601[kgcm²]J20.4170.673[kgcm²]J20.4170.195[kgcm²]J22.143 0.504[kgcm²]J22.143
1.059[kgcm²]J24.8000.420[kgcm²]J24.8000.145[kgcm²]J27.125 0.377[kgcm²]J27.125
0.733[kgcm²]J31.7380.288[kgcm²]J31.7380.096[kgcm²]J34.100 0.233[kgcm²]J35.306
0.610[kgcm²]J39.2000.247[kgcm²]J39.2000.064[kgcm²]J43.917 0.167[kgcm²]J43.917
0.435[kgcm²]J50.0000.173[kgcm²]J50.0000.131[kgcm²]J54.250 0.341[kgcm²]J54.250
0.332[kgcm²]J61.2500.130[kgcm²]J61.2500.087[kgcm²]J68.200 0.211[kgcm²]J70.611
0.206[kgcm²]J79.7220.086[kgcm²]J77.0000.059[kgcm²]J87.833 0.153[kgcm²]J87.833
0.149[kgcm²]J99.1670.058[kgcm²]J99.1670.039[kgcm²]J111.318 0.096[kgcm²]J113.667
0.094[kgcm²]J128.3330.038[kgcm²]J125.6820.027[kgcm²]J139.500 0.070[kgcm²]J137.950
0.069[kgcm²]J155.7500.026[kgcm²]J157.5000.016[kgcm²]J183.786 0.045[kgcm²]J176.313
0.044[kgcm²]J199.0630.016[kgcm²]J207.500
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
V00-en_GB-12/20136.10 - 26
GSS helical-worm gearboxesTechnical data
6.10
Moments of inertia
GSS☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GSS07GearboxGSS06Gearbox6.966[kgcm²]J5.833 21.357[kgcm²]J5.862
12.754[kgcm²]J8.1254.219[kgcm²]J8.0005.541[kgcm²]J9.042 17.436[kgcm²]J9.086
9.140[kgcm²]J10.0002.811[kgcm²]J10.2382.393[kgcm²]J11.200 7.498[kgcm²]J11.200
10.713[kgcm²]J12.5943.461[kgcm²]J12.4001.630[kgcm²]J14.286 4.837[kgcm²]J14.286
7.792[kgcm²]J15.5002.348[kgcm²]J15.8692.006[kgcm²]J17.360 6.424[kgcm²]J17.360
13.579[kgcm²]J20.5174.172[kgcm²]J20.4171.392[kgcm²]J22.143 4.177[kgcm²]J22.143
9.590[kgcm²]J25.1883.056[kgcm²]J24.8001.039[kgcm²]J27.125 3.130[kgcm²]J27.125
7.051[kgcm²]J31.0002.101[kgcm²]J31.7380.660[kgcm²]J35.306 1.955[kgcm²]J35.306
5.368[kgcm²]J39.2001.635[kgcm²]J39.2000.475[kgcm²]J43.917 1.433[kgcm²]J43.271
3.527[kgcm²]J50.0001.164[kgcm²]J50.0000.955[kgcm²]J54.250 2.888[kgcm²]J54.250
2.698[kgcm²]J61.2500.887[kgcm²]J61.2500.610[kgcm²]J70.611 1.812[kgcm²]J70.611
1.700[kgcm²]J79.7220.570[kgcm²]J79.7220.443[kgcm²]J87.833 1.338[kgcm²]J86.542
1.263[kgcm²]J97.7080.417[kgcm²]J99.1670.276[kgcm²]J113.667 0.833[kgcm²]J113.667
0.789[kgcm²]J128.3330.260[kgcm²]J128.3330.201[kgcm²]J137.950 0.609[kgcm²]J137.950
0.579[kgcm²]J155.7500.191[kgcm²]J155.7500.130[kgcm²]J174.375 0.391[kgcm²]J174.375
0.373[kgcm²]J196.8750.123[kgcm²]J196.875
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.10 - 27V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Moments of inertia
GSS☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GSS06GearboxGSS05Gearbox0.154[kgcm²]J125.476 0.310[kgcm²]J126.531
0.298[kgcm²]J142.8570.117[kgcm²]J153.7080.078[kgcm²]J193.233 0.271[kgcm²]J155.000
0.263[kgcm²]J175.0000.206[kgcm²]J222.1330.151[kgcm²]J250.952 0.144[kgcm²]J194.857
0.139[kgcm²]J220.0000.148[kgcm²]J283.3330.115[kgcm²]J307.417 0.128[kgcm²]J238.700
0.124[kgcm²]J269.5000.113[kgcm²]J347.0830.077[kgcm²]J386.467 0.112[kgcm²]J310.689
0.110[kgcm²]J350.7780.076[kgcm²]J436.3330.053[kgcm²]J497.722 0.103[kgcm²]J386.467
0.102[kgcm²]J436.3330.052[kgcm²]J561.9440.035[kgcm²]J630.803 0.069[kgcm²]J497.722
0.068[kgcm²]J561.9440.034[kgcm²]J712.1970.024[kgcm²]J790.500 0.045[kgcm²]J630.803
0.044[kgcm²]J712.1970.024[kgcm²]J892.5000.015[kgcm²]J1041.452 0.042[kgcm²]J816.333
0.042[kgcm²]J921.6670.015[kgcm²]J1175.8330.029[kgcm²]J1023.0000.029[kgcm²]J1155.0000.028[kgcm²]J1241.5500.028[kgcm²]J1401.7500.017[kgcm²]J1635.6930.017[kgcm²]J1846.750
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
V00-en_GB-12/20136.10 - 28
GSS helical-worm gearboxesTechnical data
6.10
Moments of inertia
GSS☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GSS07Gearbox0.857[kgcm²]J126.5310.822[kgcm²]J142.8570.742[kgcm²]J155.0000.719[kgcm²]J175.0000.372[kgcm²]J201.7460.358[kgcm²]J227.7780.327[kgcm²]J247.1390.317[kgcm²]J279.0280.281[kgcm²]J321.6730.276[kgcm²]J363.1790.258[kgcm²]J394.2450.255[kgcm²]J445.1160.183[kgcm²]J490.4030.181[kgcm²]J553.6810.114[kgcm²]J634.6390.113[kgcm²]J716.5280.105[kgcm²]J833.5560.105[kgcm²]J941.1110.076[kgcm²]J1011.6330.076[kgcm²]J1142.1670.074[kgcm²]J1227.7550.073[kgcm²]J1386.1750.047[kgcm²]J1569.1810.047[kgcm²]J1771.656
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.10 - 29V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Efficiencies
ƒ During start-up, the start-up efficiency ηa of a helical-wormgearbox is lower than its operative efficiency at rated speed.The start-up efficiency ηamust therefore always be consideredwhen starting under load.
GSS04-2
n2 [r/min]
800630400250160100634032251610
0.890.890.900.900.900.900.900.890.890.880.860.83ηc=10.71ηa5.6390.71ηa7.733 0.890.890.900.900.900.900.900.890.890.880.860.83ηc=10.67ηa9.042 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.71ηa9.897 0.890.890.900.900.900.900.900.890.890.880.860.83ηc=10.71ηa10.827 0.890.890.900.900.900.900.900.890.890.880.860.83ηc=10.67ηa12.400 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.71ηa13.810 0.890.890.900.900.900.900.900.890.890.880.860.83ηc=10.67ηa15.869 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.67ηa17.360 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.55ηa20.417 0.780.780.790.790.790.790.790.780.76ηc=10.67ηa22.143 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.56ηa24.800 0.790.800.800.810.810.810.800.790.77ηc=10.67ηa27.125 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.56ηa31.738 0.790.800.800.810.810.810.800.790.77ηc=10.67ηa34.100 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.55ηa39.200 0.780.780.790.790.790.790.790.780.76ηc=10.67ηa43.917 0.870.870.870.870.880.880.870.870.860.840.81ηc=10.55ηa50.000 0.780.780.790.790.790.790.790.780.76ηc=10.56ηa54.250 0.790.800.800.810.810.810.800.790.77ηc=10.55ηa61.250 0.780.780.790.790.790.790.790.780.76ηc=10.56ηa68.200 0.790.800.800.810.810.810.800.790.77ηc=10.55ηa77.000 0.780.780.790.790.790.790.790.780.76ηc=10.56ηa87.833 0.790.800.800.810.810.810.800.790.77ηc=10.55ηa99.167 0.780.780.790.790.790.790.790.780.76ηc=10.56ηa111.318 0.790.800.800.810.810.810.800.790.77ηc=10.55ηa125.682 0.780.780.790.790.790.790.790.780.76ηc=10.56ηa139.500 0.790.800.800.810.810.810.800.790.77ηc=10.55ηa157.500 0.780.780.790.790.790.790.790.780.76ηc=10.56ηa183.786 0.790.800.800.810.810.810.800.790.77ηc=10.55ηa207.500 0.780.780.790.790.790.790.790.780.76ηc=1
V00-en_GB-12/20136.10 - 30
GSS helical-worm gearboxesTechnical data
6.10
Efficiencies
ƒ During start-up, the start-up efficiency ηa of a helical-wormgearbox is lower than its operative efficiency at rated speed.The start-up efficiency ηamust therefore always be consideredwhen starting under load.
GSS05-2
n2 [r/min]
800630400250160100634032251610
0.900.900.900.910.910.910.910.900.900.890.870.85ηc=10.71ηa5.6390.71ηa7.733 0.900.900.900.910.910.910.910.900.900.890.870.85ηc=10.67ηa9.042 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.71ηa9.897 0.900.900.900.910.910.910.910.900.900.890.870.85ηc=10.71ηa10.827 0.900.900.900.910.910.910.910.900.900.890.870.85ηc=10.67ηa12.400 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.71ηa13.810 0.900.900.900.910.910.910.910.900.900.890.870.85ηc=10.67ηa15.869 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.67ηa17.360 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.55ηa20.417 0.810.810.810.810.810.810.810.800.79ηc=10.67ηa22.143 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.57ηa24.800 0.820.820.820.830.830.820.820.810.79ηc=10.67ηa27.125 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.57ηa31.738 0.820.820.820.830.830.820.820.810.79ηc=10.67ηa35.306 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.55ηa39.200 0.810.810.810.810.810.810.810.800.79ηc=10.67ηa43.917 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.55ηa50.000 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa54.250 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa61.250 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa70.611 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa79.722 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa87.833 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa99.167 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa113.667 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa128.333 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa137.950 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa155.750 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa176.313 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa199.063 0.810.810.810.810.810.810.810.800.79ηc=1
6.10 - 31V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Efficiencies
ƒ During start-up, the start-up efficiency ηa of a helical-wormgearbox is lower than its operative efficiency at rated speed.The start-up efficiency ηamust therefore always be consideredwhen starting under load.
GSS05-3
n2 [r/min]
630400250160100634032251610
0.880.880.880.880.890.890.880.880.870.860.83ηc=10.67ηa125.4760.67ηa153.708 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.67ηa193.233 0.880.880.880.880.890.890.880.880.870.860.83ηc=10.55ηa222.133 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa250.952 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa283.333 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa307.417 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa347.083 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa386.467 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa436.333 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa497.722 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa561.945 0.810.810.810.810.810.810.810.800.79ηc=10.57ηa630.803 0.820.820.820.830.830.820.820.810.79ηc=10.55ηa712.197 0.810.810.810.810.810.810.810.800.79ηc=1
V00-en_GB-12/20136.10 - 32
GSS helical-worm gearboxesTechnical data
6.10
Efficiencies
ƒ During start-up, the start-up efficiency ηa of a helical-wormgearbox is lower than its operative efficiency at rated speed.The start-up efficiency ηamust therefore always be consideredwhen starting under load.
GSS06-2
n2 [r/min]
800630400250160100634032251610
0.910.910.910.920.920.920.910.910.910.900.890.87ηc=10.72ηa5.8330.72ηa8.000 0.910.910.910.920.920.920.910.910.910.900.890.87ηc=10.67ηa9.042 0.890.890.890.890.890.890.890.890.880.870.85ηc=10.72ηa10.238 0.910.910.910.920.920.920.910.910.910.900.890.87ηc=10.72ηa11.200 0.910.910.910.920.920.920.910.910.910.900.890.87ηc=10.67ηa12.400 0.800.890.890.890.890.890.890.890.890.880.870.85ηc=10.72ηa14.286 0.910.910.910.920.920.920.910.910.910.900.89ηc=10.67ηa15.869 0.890.890.890.890.890.890.890.890.880.870.85ηc=10.67ηa17.360 0.890.890.890.890.890.890.890.890.880.870.85ηc=10.57ηa20.417 0.830.830.830.830.830.830.830.820.81ηc=10.67ηa22.143 0.890.890.890.890.890.890.890.890.880.870.85ηc=10.57ηa24.800 0.830.830.830.830.830.830.830.830.81ηc=10.67ηa27.125 0.890.890.890.890.890.890.890.890.880.870.85ηc=10.57ηa31.738 0.830.830.830.830.830.830.830.830.81ηc=10.67ηa35.306 0.890.890.890.890.890.890.890.890.880.870.85ηc=10.57ηa39.200 0.830.830.830.830.830.830.830.820.81ηc=10.67ηa43.917 0.890.890.890.890.890.890.890.890.880.870.85ηc=10.57ηa50.000 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa54.250 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa61.250 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa70.611 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa79.722 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa87.833 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa99.167 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa113.667 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa128.333 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa137.950 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa155.750 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa174.375 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa196.875 0.830.830.830.830.830.830.830.820.81ηc=1
6.10 - 33V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Efficiencies
ƒ During start-up, the start-up efficiency ηa of a helical-wormgearbox is lower than its operative efficiency at rated speed.The start-up efficiency ηamust therefore always be consideredwhen starting under load.
GSS06-3
n2 [r/min]
800630400250160100634032251610
0.910.910.910.830.830.830.830.830.830.830.830.81ηc=10.57ηa126.5310.57ηa142.857 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa155.000 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa175.000 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa194.857 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa220.000 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa238.700 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa269.500 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa310.689 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa350.778 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa386.467 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa436.333 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa497.722 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa561.945 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa630.803 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa712.197 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa816.333 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa921.667 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa1023.000 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa1155.000 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa1241.550 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa1401.750 0.830.830.830.830.830.830.830.820.81ηc=10.57ηa1635.693 0.830.830.830.830.830.830.830.830.81ηc=10.57ηa1846.750 0.830.830.830.830.830.830.830.820.81ηc=1
V00-en_GB-12/20136.10 - 34
GSS helical-worm gearboxesTechnical data
6.10
Efficiencies
ƒ During start-up, the start-up efficiency ηa of a helical-wormgearbox is lower than its operative efficiency at rated speed.The start-up efficiency ηamust therefore always be consideredwhen starting under load.
GSS07-2
n2 [r/min]
800630400250160100634032251610
0.920.920.920.920.920.920.920.920.920.920.910.89ηc=10.74ηa5.8620.74ηa8.125 0.920.920.920.920.920.920.920.920.920.920.910.89ηc=10.69ηa9.086 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.74ηa10.000 0.920.920.920.920.920.920.920.920.920.920.910.89ηc=10.74ηa11.200 0.920.920.920.920.920.920.920.920.920.920.910.89ηc=10.69ηa12.594 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.74ηa14.286 0.920.920.920.920.920.920.920.920.920.920.910.89ηc=10.69ηa15.500 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.69ηa17.360 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.60ηa20.517 0.850.850.850.850.850.850.850.840.84ηc=10.69ηa22.143 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.60ηa25.188 0.850.850.850.850.850.850.850.850.84ηc=10.69ηa27.125 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.60ηa31.000 0.850.850.850.850.850.850.850.850.84ηc=10.69ηa35.306 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.60ηa39.200 0.850.850.850.850.850.850.850.840.84ηc=10.69ηa43.271 0.900.900.900.900.900.900.900.900.900.890.88ηc=10.60ηa50.000 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa54.250 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa61.250 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa70.611 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa79.722 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa86.542 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa97.708 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa113.667 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa128.333 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa137.950 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa155.750 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa174.375 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa196.875 0.850.850.850.850.850.850.850.840.84ηc=1
6.10 - 35V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Efficiencies
ƒ During start-up, the start-up efficiency ηa of a helical-wormgearbox is lower than its operative efficiency at rated speed.The start-up efficiency ηamust therefore always be consideredwhen starting under load.
GSS07-3
n2 [r/min]
250160100634032251610
0.850.850.850.850.850.850.850.850.84ηc=10.60ηa126.5310.60ηa142.857 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa155.000 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa175.000 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa201.746 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa227.778 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa247.139 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa279.028 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa321.673 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa363.179 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa394.245 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa445.116 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa490.403 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa553.681 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa634.639 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa716.528 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa833.556 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa941.111 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa1011.633 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa1142.167 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa1227.755 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa1386.175 0.850.850.850.850.850.850.850.840.84ηc=10.60ηa1569.181 0.850.850.850.850.850.850.850.850.84ηc=10.60ηa1771.656 0.850.850.850.850.850.850.850.840.84ηc=1
V00-en_GB-12/20136.10 - 36
GSS helical-worm gearboxesTechnical data
6.10
Weights
GSS☐☐-2M HAR / HBR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
31231816[kg]mGSS044940322826[kg]mGSS05
746153454038[kg]mGSS0612999867870[kg]mGSS07
GSS☐☐-2M HAK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
33262119[kg]mGSS045344363230[kg]mGSS05
816860524745[kg]mGSS06140110978981[kg]mGSS07
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.10 - 37V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Weights
GSS☐☐-2M VAR / VBR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
31241917[kg]mGSS045041332927[kg]mGSS05
776455474240[kg]mGSS06134104918375[kg]mGSS07
GSS☐☐-2M VAK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
34262119[kg]mGSS045445373331[kg]mGSS05
847162544947[kg]mGSS061451151029486[kg]mGSS07
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.10 - 38
GSS helical-worm gearboxesTechnical data
6.10
Weights
GSS☐☐-2M SAR / SBR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
31241917[kg]mGSS045041332926[kg]mGSS05
756254464139[kg]mGSS06130101887971[kg]mGSS07
GSS☐☐-2M SAK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
34262119[kg]mGSS045445373330[kg]mGSS05
826961534846[kg]mGSS06141112999082[kg]mGSS07
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.10 - 39V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Weights
GSS☐☐-3M HAR / HBR
090C32080C42080C32071C32063C32071C42063C42
26[kg]mGSS05494442[kg]mGSS06
85787371[kg]mGSS07
GSS☐☐-3M HAK
090C32080C42080C32071C32063C32071C42063C42
30[kg]mGSS05565149[kg]mGSS06
96898482[kg]mGSS07
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.10 - 40
GSS helical-worm gearboxesTechnical data
6.10
Weights
GSS☐☐-3M VAR / VBR
090C32080C42080C32071C32063C32071C42063C42
27[kg]mGSS05514644[kg]mGSS06
90837876[kg]mGSS07
GSS☐☐-3M VAK
090C32080C42080C32071C32063C32071C42063C42
31[kg]mGSS05585351[kg]mGSS06
101948987[kg]mGSS07
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.10 - 41V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Weights
GSS☐☐-3M SAR / SBR
090C32080C42080C32071C32063C32071C42063C42
27[kg]mGSS05504543[kg]mGSS06
87797472[kg]mGSS07
GSS☐☐-3M SAK
090C32080C42080C32071C32063C32071C42063C42
31[kg]mGSS05575250[kg]mGSS06
98908583[kg]mGSS07
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.10 - 42
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C329.8976.0139.1348-6115
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C3210.8275.21410318-5513
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3213.8105.51812249-4310
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3215.8696.02014217-389.0
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C3217.3605.22216198-358.3
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3222.1435.12919155-276.5
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3227.1254.53523127-225.3
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3231.7383.43924108-194.5
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3234.1003.84428101-184.2
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3239.2002.9472988-153.7
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3243.9173.1573678-143.3
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3250.0002.5603669-122.9
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3254.2502.4664063-112.6
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3261.2502.2734456-9.82.3
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3268.2002.1834950-8.82.1
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3277.0001.9915345-7.81.9
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C3279.7223.1965643-7.51.8
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3287.8331.71066239-6.81.6
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C3287.8332.91086239-6.81.6
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C3299.1671.51176835-6.11.5
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C3299.1672.71206835-6.11.5
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C32111.3181.31348031-5.41.3
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C32113.6672.51418130-5.31.3
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C32125.6821.21478627-4.81.1
70E84AV☐☐☐5514☐☐0GSS05-3M☐☐☐063C32125.4761.61658627-4.81.1
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C32128.3332.31568927-4.71.1
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C32139.5001.116710025-4.31.0
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C32137.9502.11729925-4.41.0
62E84AV☐☐☐5514☐☐0GSS04-2M☐☐☐063C32157.5001.018310922-3.80.9
70E84AV☐☐☐5514☐☐0GSS05-3M☐☐☐063C32153.7081.420210622-3.90.9
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C32155.7501.919110922-3.90.9
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C32176.3131.622012820-3.40.8
62E84AV☐☐☐5514☐☐0GSS06-2M☐☐☐063C32174.3752.921012420-3.40.8
70E84AV☐☐☐5514☐☐0GSS05-3M☐☐☐063C32193.2331.225113418-3.10.7
62E84AV☐☐☐5514☐☐0GSS06-2M☐☐☐063C32196.8752.923414118-3.10.7
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32194.8573.222213518-3.10.7
62E84AV☐☐☐5514☐☐0GSS05-2M☐☐☐063C32199.0631.524514017-3.00.7
70E84AV☐☐☐5514☐☐0GSS05-3M☐☐☐063C32222.1331.326815416-2.70.7
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32220.0002.824815416-2.70.7
70E84AV☐☐☐5514☐☐0GSS05-3M☐☐☐063C32250.9521.230617514-2.40.6
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32238.7002.627116714-2.50.6
6.10 - 43V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32269.5002.330219013-2.20.5
70E84AV☐☐☐5514☐☐0GSS05-3M☐☐☐063C32283.3331.133819812-2.10.5
70E84AV☐☐☐5514☐☐0GSS05-3M☐☐☐063C32307.4171.037121511-2.00.5
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32310.6892.035022011-1.90.5
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32350.7781.83882509.8-1.70.4
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32363.1793.04122639.5-1.70.4
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32386.4671.74312768.9-1.60.4
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32394.2452.74532878.7-1.50.4
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32436.3331.54803137.9-1.40.3
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32445.1162.45033267.7-1.40.3
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32490.4032.25563617.0-1.20.3
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32497.7221.35503596.9-1.20.3
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32553.6812.06204096.2-1.10.3
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32561.9441.26124066.1-1.10.3
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32630.8031.06894575.5-1.00.2
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32634.6391.77154725.4-1.00.2
70E84AV☐☐☐5514☐☐0GSS06-3M☐☐☐063C32712.1970.97635184.8-0.80.2
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32716.5281.67955354.8-0.80.2
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32833.5561.39286254.1-0.70.2
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C32941.1111.210307083.7-0.60.2
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C321011.6331.111127623.4-0.60.1
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C321142.1671.012328633.0-0.50.1
70E84AV☐☐☐5514☐☐0GSS07-3M☐☐☐063C321227.7550.913299292.8-0.50.1
V00-en_GB-12/20136.10 - 44
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C429.8974.31813344-6114
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4210.8273.82014314-5513
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4213.8104.02617246-4310
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4215.8694.32919214-388.9
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4217.3603.83122196-358.2
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4222.1433.74026154-276.4
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4227.1253.24932125-225.2
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4231.7382.55434107-194.5
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4234.1002.86239100-184.2
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4239.2002.1654187-153.6
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4243.9172.2805077-143.2
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4243.9173.0805177-143.2
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4250.0001.8835068-122.8
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4250.0003.0835168-122.8
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4254.2501.8925563-112.6
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4261.2501.61016056-9.82.3
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4268.2001.51156850-8.82.1
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4270.6112.41217148-8.52.0
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4277.0001.41277344-7.81.8
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4279.7222.21347843-7.51.8
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4287.8331.21478639-6.81.6
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4287.8332.11518639-6.81.6
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C4299.1671.11639334-6.11.4
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C4299.1671.91679434-6.11.4
62E84AV☐☐☐7514☐☐0GSS04-2M☐☐☐063C42111.3181.018610931-5.41.3
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C42113.6671.819611230-5.31.3
62E84AV☐☐☐7514☐☐0GSS06-2M☐☐☐063C42113.6673.019211230-5.31.3
70E84AV☐☐☐7514☐☐0GSS05-3M☐☐☐063C42125.4761.222911927-4.81.1
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C42128.3331.621712327-4.71.1
62E84AV☐☐☐7514☐☐0GSS06-2M☐☐☐063C42128.3333.021412627-4.71.1
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C42137.9501.523813725-4.41.0
62E84AV☐☐☐7514☐☐0GSS06-2M☐☐☐063C42137.9502.623213625-4.41.0
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42142.8573.022613724-4.21.0
70E84AV☐☐☐7514☐☐0GSS05-3M☐☐☐063C42153.7081.027914622-3.90.9
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C42155.7501.426515022-3.90.9
62E84AV☐☐☐7514☐☐0GSS06-2M☐☐☐063C42155.7502.625915322-3.90.9
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42155.0002.824714922-3.90.9
62E84AV☐☐☐7514☐☐0GSS06-2M☐☐☐063C42174.3752.129217220-3.40.8
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C42176.3131.130517619-3.40.8
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42175.0002.627616919-3.40.8
62E84AV☐☐☐7514☐☐0GSS05-2M☐☐☐063C42199.0631.133919317-3.00.7
6.10 - 45V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐7514☐☐0GSS06-2M☐☐☐063C42196.8752.132619517-3.10.7
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42194.8572.331018817-3.10.7
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42220.0002.134521316-2.70.6
70E84AV☐☐☐7514☐☐0GSS05-3M☐☐☐063C42222.1331.037221215-2.70.6
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42238.7001.937723214-2.50.6
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42247.1393.139724414-2.40.6
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42269.5001.742026213-2.20.5
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42279.0282.844427712-2.20.5
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42310.6891.548630411-1.90.5
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42321.6732.451632111-1.90.4
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42350.7781.35393459.7-1.70.4
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42363.1792.15743659.4-1.70.4
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42386.4671.25983818.8-1.60.4
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42394.2452.06313978.6-1.50.4
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42436.3331.16664317.8-1.40.3
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42445.1161.87004517.6-1.40.3
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42490.4031.67734986.9-1.20.3
70E84AV☐☐☐7514☐☐0GSS06-3M☐☐☐063C42497.7220.97624936.8-1.20.3
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42553.6811.48625656.1-1.10.3
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42634.6391.39936505.4-1.00.2
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42716.5281.111047364.8-0.80.2
70E84AV☐☐☐7514☐☐0GSS07-3M☐☐☐063C42833.5561.012878594.1-0.70.2
V00-en_GB-12/20136.10 - 46
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C329.8974.32618353-6115
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3210.8274.32820322-5513
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3213.8104.03625253-4311
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3215.8693.24128220-389.2
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3217.3603.14531201-358.4
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3222.1432.65839158-276.6
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3227.1252.37147129-225.4
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3231.7381.77851110-194.6
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3231.7382.87651110-194.6
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3234.1001.98959102-184.3
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3235.3063.1926099-174.1
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3239.2001.5946189-153.7
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3239.2002.4936289-153.7
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3243.9171.61157580-143.3
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3243.9172.71157480-143.3
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3250.0001.31207570-122.9
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3250.0002.11207770-122.9
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3254.2501.21328264-112.7
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3254.2502.01338464-112.7
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3261.2501.11469057-9.82.4
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3261.2501.81479257-9.82.4
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3268.2001.116510151-8.82.1
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3270.6111.717410649-8.52.1
62E84AV☐☐☐1124☐☐0GSS04-2M☐☐☐071C3277.0001.018210945-7.81.9
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3279.7221.619311644-7.51.8
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C3279.7223.019211944-7.51.8
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3287.8331.521712940-6.81.7
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C3287.8332.921312940-6.81.7
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C3299.1671.424114135-6.11.5
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C3299.1672.623914535-6.11.5
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C32113.6671.228116631-5.31.3
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C32113.6672.527616631-5.31.3
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32126.5312.329318228-4.71.2
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C32128.3331.231218227-4.71.1
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C32128.3332.230918727-4.71.1
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C32137.9501.134220325-4.41.1
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C32137.9502.133420125-4.41.1
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32142.8572.132720524-4.21.0
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32155.0002.035722323-3.90.9
62E84AV☐☐☐1124☐☐0GSS05-2M☐☐☐071C32155.7500.938022222-3.90.9
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C32155.7501.937422822-3.90.9
6.10 - 47V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C32174.3751.742025520-3.40.8
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32175.0001.839925220-3.40.8
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32175.0003.040625820-3.40.8
62E84AV☐☐☐1124☐☐0GSS06-2M☐☐☐071C32196.8751.546928918-3.10.7
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32194.8571.644628118-3.10.8
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32201.7462.647029817-3.00.7
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32220.0001.449731816-2.70.7
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32238.7001.354334515-2.50.6
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32227.7782.352633715-2.60.6
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32247.1392.157436614-2.40.6
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32269.5001.260539013-2.20.5
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32279.0281.964141413-2.20.5
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32310.6891.069945111-1.90.5
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32321.6731.774447911-1.90.5
70E84AV☐☐☐1124☐☐0GSS06-3M☐☐☐071C32350.7780.977551010-1.70.4
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32363.1791.58275439.6-1.70.4
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32394.2451.49085918.9-1.50.4
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32445.1161.210066697.8-1.40.3
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32490.4031.111127397.1-1.20.3
70E84AV☐☐☐1124☐☐0GSS07-3M☐☐☐071C32553.6811.012388376.3-1.10.3
V00-en_GB-12/20136.10 - 48
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C429.8973.13626349-6115
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4210.8273.14028319-5513
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4213.8102.95135250-4310
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4215.8692.35839217-389.1
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4217.3602.26343199-358.3
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4222.1431.98054156-276.5
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4222.1433.18054156-276.5
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4227.1251.69965127-225.3
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4227.1252.79865127-225.3
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4231.7381.310870109-194.5
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4231.7382.010671109-194.5
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4234.1001.412481101-184.2
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4235.3062.21288498-174.1
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4239.2001.11308488-153.7
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4239.2001.81298588-153.7
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4243.9171.115910279-143.3
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4243.9171.916010379-143.3
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C4243.9172.815910579-143.3
62E84AV☐☐☐1524☐☐0GSS04-2M☐☐☐071C4250.0000.916610369-122.9
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4250.0001.516610669-122.9
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C4250.0002.916810869-122.9
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4254.2501.418411664-112.7
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4261.2501.320512756-9.82.4
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4270.6111.224114649-8.52.0
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C4270.6112.423914749-8.52.0
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4279.7221.126716043-7.51.8
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C4279.7222.226816543-7.51.8
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4287.8331.130017739-6.81.6
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C4287.8332.129717939-6.81.6
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C4299.1671.033319335-6.11.5
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C4299.1671.933320135-6.11.5
62E84AV☐☐☐1524☐☐0GSS05-2M☐☐☐071C42113.6670.939022930-5.31.3
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C42113.6671.838423030-5.31.3
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C42128.3331.642925927-4.71.1
70E84AV☐☐☐1524☐☐0GSS06-3M☐☐☐071C42126.5311.740725127-4.71.1
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42126.5313.041226027-4.71.1
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C42137.9501.546427825-4.41.0
70E84AV☐☐☐1524☐☐0GSS06-3M☐☐☐071C42142.8571.545528324-4.21.0
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42142.8572.746229324-4.21.0
70E84AV☐☐☐1524☐☐0GSS06-3M☐☐☐071C42155.0001.449730822-3.90.9
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C42155.7501.451931422-3.90.9
6.10 - 49V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42155.0002.450431822-3.90.9
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C42174.3751.258335120-3.40.8
70E84AV☐☐☐1524☐☐0GSS06-3M☐☐☐071C42175.0001.355334720-3.40.8
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42175.0002.256535820-3.40.8
62E84AV☐☐☐1524☐☐0GSS06-2M☐☐☐071C42196.8751.165039718-3.10.7
70E84AV☐☐☐1524☐☐0GSS06-3M☐☐☐071C42194.8571.261938718-3.10.7
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42201.7461.965441317-3.00.7
70E84AV☐☐☐1524☐☐0GSS06-3M☐☐☐071C42220.0001.069043716-2.70.7
70E84AV☐☐☐1524☐☐0GSS06-3M☐☐☐071C42238.7001.075247415-2.50.6
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42227.7781.773246515-2.60.6
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42247.1391.679850414-2.40.6
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42279.0281.489157012-2.20.5
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42321.6731.2103366011-1.90.5
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42363.1791.111477479.5-1.70.4
70E84AV☐☐☐1524☐☐0GSS07-3M☐☐☐071C42394.2451.012598138.8-1.50.4
V00-en_GB-12/20136.10 - 50
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐2224☐☐0GSS04-2M☐☐☐080C329.8972.25337354-6115
62E84AV☐☐☐2224☐☐0GSS04-2M☐☐☐080C3210.8272.15841323-5514
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3210.8273.25840323-5514
62E84AV☐☐☐2224☐☐0GSS04-2M☐☐☐080C3213.8102.07451253-4311
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3213.8103.07451253-4311
62E84AV☐☐☐2224☐☐0GSS04-2M☐☐☐080C3215.8691.68457221-389.2
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3215.8692.68356221-389.2
62E84AV☐☐☐2224☐☐0GSS04-2M☐☐☐080C3217.3601.59262202-358.4
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3217.3602.59162202-358.4
62E84AV☐☐☐2224☐☐0GSS04-2M☐☐☐080C3222.1431.311778158-276.6
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3222.1432.111678158-276.6
62E84AV☐☐☐2224☐☐0GSS04-2M☐☐☐080C3227.1251.114394129-225.4
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3227.1251.814395129-225.4
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3231.7381.4155103110-194.6
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3231.7382.3158102110-194.6
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3235.3061.518712199-174.1
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3235.3063.118512099-174.1
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3239.2001.218812489-153.7
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3239.2002.119312689-153.7
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3243.9171.323314880-143.3
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3243.9172.723114880-143.3
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3250.0001.024215370-122.9
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3250.0002.024615770-122.9
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C3250.0003.024816170-122.9
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3254.2501.026816765-112.7
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3254.2502.026916965-112.7
62E84AV☐☐☐2224☐☐0GSS05-2M☐☐☐080C3261.2500.929718457-9.82.4
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3261.2501.830119057-9.82.4
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3270.6111.734921450-8.52.1
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C3270.6112.835222350-8.52.1
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3279.7221.539124044-7.51.8
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C3279.7222.739425044-7.51.8
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3287.8331.543326040-6.81.7
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C3286.5422.743226940-6.91.7
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C3297.7082.448430236-6.11.5
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C3299.1671.348529135-6.11.5
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C32113.6671.255933231-5.31.3
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C32113.6672.256734731-5.31.3
70E84AV☐☐☐2224☐☐0GSS06-3M☐☐☐080C32126.5311.259336328-4.71.2
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32126.5312.160237928-4.71.2
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C32128.3331.162537427-4.71.1
6.10 - 51V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C32128.3331.963539127-4.71.1
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C32137.9501.167540125-4.41.1
70E84AV☐☐☐2224☐☐0GSS06-3M☐☐☐080C32142.8571.166240925-4.21.0
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C32137.9501.868741725-4.41.1
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32142.8571.867442625-4.21.0
62E84AV☐☐☐2224☐☐0GSS06-2M☐☐☐080C32155.7501.075445323-3.90.9
70E84AV☐☐☐2224☐☐0GSS06-3M☐☐☐080C32155.0001.072244423-3.90.9
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C32155.7501.677047123-3.90.9
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32155.0001.773546123-3.90.9
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C32174.3751.486452220-3.40.8
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32175.0001.582451920-3.40.8
62E84AV☐☐☐2224☐☐0GSS07-2M☐☐☐080C32196.8751.396859218-3.10.7
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32201.7461.395259717-3.00.7
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32227.7781.2106567215-2.60.6
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32247.1391.1116072814-2.40.6
70E84AV☐☐☐2224☐☐0GSS07-3M☐☐☐080C32279.0281.0129582213-2.20.5
V00-en_GB-12/20136.10 - 52
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐3024☐☐0GSS04-2M☐☐☐080C429.8971.67352352-9115
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C429.8972.47351352-9115
62E84AV☐☐☐3024☐☐0GSS04-2M☐☐☐080C4210.8271.68056321-8313
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4210.8272.48056321-8313
62E84AV☐☐☐3024☐☐0GSS04-2M☐☐☐080C4213.8101.510271252-6511
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4213.8102.210271252-6511
62E84AV☐☐☐3024☐☐0GSS04-2M☐☐☐080C4215.8691.211679219-579.1
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4215.8691.911479219-579.1
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4215.8692.811579219-579.1
62E84AV☐☐☐3024☐☐0GSS04-2M☐☐☐080C4217.3601.112786201-528.4
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4217.3601.812586201-528.4
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4217.3602.812686201-528.4
62E84AV☐☐☐3024☐☐0GSS04-2M☐☐☐080C4222.1431.0161108157-416.6
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4222.1431.5161108157-416.6
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4222.1432.6161108157-416.6
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4227.1251.3197131128-335.4
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4227.1252.4197131128-335.4
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4231.7381.0213143110-284.6
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4231.7381.7218144110-284.6
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4235.3061.125816899-264.1
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4235.3062.325616899-264.1
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4239.2001.626717689-233.7
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C4243.2712.831421280-213.4
62E84AV☐☐☐3024☐☐0GSS05-2M☐☐☐080C4243.9171.032120579-213.3
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4243.9171.931920779-213.3
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4250.0001.534021970-182.9
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C4250.0002.234322670-182.9
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4254.2501.437123564-172.7
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4261.2501.341526357-152.4
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4270.6111.248129749-132.1
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C4270.6112.148831149-132.1
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4279.7221.153933344-111.8
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C4279.7222.054534944-111.8
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4287.8331.159736040-101.7
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C4286.5421.959737440-101.7
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C4297.7081.866841936-9.21.5
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C4299.1671.066840335-9.11.5
62E84AV☐☐☐3024☐☐0GSS06-2M☐☐☐080C42113.6670.977045931-7.91.3
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C42113.6671.678348131-7.91.3
70E84AV☐☐☐3024☐☐0GSS07-3M☐☐☐080C42126.5311.583152628-7.11.2
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C42128.3331.487654227-7.01.1
6.10 - 53V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C42137.9501.394757825-6.51.1
70E84AV☐☐☐3024☐☐0GSS07-3M☐☐☐080C42142.8571.393059124-6.31.0
70E84AV☐☐☐3024☐☐0GSS07-3M☐☐☐080C42155.0001.2101463923-5.80.9
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C42155.7501.2106165222-5.80.9
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C42174.3751.0119172220-5.20.8
70E84AV☐☐☐3024☐☐0GSS07-3M☐☐☐080C42175.0001.1113671820-5.10.8
62E84AV☐☐☐3024☐☐0GSS07-2M☐☐☐080C42196.8750.9133381818-4.60.7
70E84AV☐☐☐3024☐☐0GSS07-3M☐☐☐080C42201.7461.0131182517-4.50.7
V00-en_GB-12/20136.10 - 54
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐4024☐☐0GSS04-2M☐☐☐090C329.8971.29865352-6115
62E84AV☐☐☐4024☐☐0GSS05-2M☐☐☐090C329.8971.89864352-6115
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3210.2382.810167340-5914
62E84AV☐☐☐4024☐☐0GSS04-2M☐☐☐090C3210.8271.210770321-5513
62E84AV☐☐☐4024☐☐0GSS05-2M☐☐☐090C3210.8271.810771321-5513
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3211.2002.711073311-5413
62E84AV☐☐☐4024☐☐0GSS04-2M☐☐☐090C3213.8101.113789252-4311
62E84AV☐☐☐4024☐☐0GSS05-2M☐☐☐090C3213.8101.613789252-4311
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3214.2862.514291244-4210
62E84AV☐☐☐4024☐☐0GSS05-2M☐☐☐090C3215.8691.415399219-389.1
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3215.8692.115599219-389.1
62E84AV☐☐☐4024☐☐0GSS05-2M☐☐☐090C3217.3601.4168108201-358.4
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3217.3602.1169107201-358.4
62E84AV☐☐☐4024☐☐0GSS05-2M☐☐☐090C3222.1431.2215136157-276.6
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3222.1431.9216135157-276.6
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3222.1432.9215139157-276.6
62E84AV☐☐☐4024☐☐0GSS05-2M☐☐☐090C3227.1251.0264164128-225.4
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3227.1251.8264165128-225.4
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3231.7381.3292181110-194.6
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3235.3061.734421199-174.1
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3235.3062.634421799-174.1
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3239.2001.235722189-153.7
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3243.2712.442126380-143.4
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3243.9171.542725979-143.3
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3250.0001.145527570-122.9
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3250.0001.746028570-122.9
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3254.2501.149729564-112.7
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3261.2501.055633057-9.82.4
62E84AV☐☐☐4024☐☐0GSS06-2M☐☐☐090C3270.6110.964437249-8.52.1
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3270.6111.665439149-8.52.1
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3279.7221.573143844-7.51.8
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3286.5421.580146940-6.91.7
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C3297.7081.389652636-6.11.5
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C32113.6671.2104960331-5.31.3
70E84AV☐☐☐4024☐☐0GSS07-3M☐☐☐090C32126.5311.1111365828-4.71.2
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C32128.3331.1117367827-4.71.1
62E84AV☐☐☐4024☐☐0GSS07-2M☐☐☐090C32137.9501.0126872325-4.41.1
70E84AV☐☐☐4024☐☐0GSS07-3M☐☐☐090C32142.8571.0124673924-4.21.0
70E84AV☐☐☐4024☐☐0GSS07-3M☐☐☐090C32155.0000.9135779923-3.90.9
6.10 - 55V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐5524☐☐0GSS05-2M☐☐☐100C129.8971.313389356-6115
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1210.0003.013588353-6015
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1210.2382.013891344-5914
62E84AV☐☐☐5524☐☐0GSS05-2M☐☐☐100C1210.8271.314697326-5514
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1211.2002.015199315-5413
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1211.2003.015198315-5413
62E84AV☐☐☐5524☐☐0GSS05-2M☐☐☐100C1213.8101.2187122255-4311
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1214.2861.8194126247-4210
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1214.2862.8194125247-4210
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1215.5002.4206131227-399.5
62E84AV☐☐☐5524☐☐0GSS05-2M☐☐☐100C1215.8691.1208136222-389.3
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1215.8691.6211135222-389.3
62E84AV☐☐☐5524☐☐0GSS05-2M☐☐☐100C1217.3601.0229148203-358.5
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1217.3601.5231148203-358.5
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1217.3602.3231146203-358.5
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1222.1431.4295187159-276.6
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1222.1432.1295187159-276.6
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1227.1251.4361227130-225.4
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1227.1252.0361229130-225.4
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1231.0001.4392249114-194.7
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1231.7380.9398249111-194.6
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1235.3061.2469290100-174.2
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1235.3061.9470297100-174.2
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1239.2001.349231390-153.8
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1243.2711.857636082-143.4
62E84AV☐☐☐5524☐☐0GSS06-2M☐☐☐100C1243.9171.158335580-143.3
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1250.0001.262839371-122.9
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1254.2501.268742265-112.7
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1261.2501.276847458-9.82.4
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1270.6111.189253750-8.52.1
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1279.7221.199760144-7.51.8
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1286.5421.1109264441-6.91.7
62E84AV☐☐☐5524☐☐0GSS07-2M☐☐☐100C1297.7081.0122172036-6.11.5
V00-en_GB-12/20136.10 - 56
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐7524☐☐0GSS05-2M☐☐☐100C329.8971.0183122355-6115
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3210.0002.2186123352-6015
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3210.2381.5190126343-5914
62E84AV☐☐☐7524☐☐0GSS05-2M☐☐☐100C3210.8271.0201133325-5514
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3211.2001.5208138314-5413
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3211.2002.2209137314-5413
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3214.2861.3266174246-4210
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3214.2862.0267175246-4210
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3215.5001.7283184227-399.5
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3215.8691.1290187222-389.2
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3217.3601.1318205203-358.4
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3217.3601.7318205203-358.4
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3222.1431.0405258159-276.6
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3222.1431.6406261159-276.6
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3227.1251.0496313130-225.4
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3227.1251.5497319130-225.4
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3231.0001.1538346113-194.7
62E84AV☐☐☐7524☐☐0GSS06-2M☐☐☐100C3235.3060.9644400100-174.2
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3235.3061.4647411100-174.2
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3239.2001.067643490-153.7
62E84AV☐☐☐7524☐☐0GSS07-2M☐☐☐100C3243.2711.379149881-143.4
6.10 - 57V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2210.0001.5274166353-6015
62E84AV☐☐☐1134☐☐0GSS06-2M☐☐☐112C2210.2381.0278170345-5914
62E84AV☐☐☐1134☐☐0GSS06-2M☐☐☐112C2211.2001.0305186315-5413
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2211.2001.5307186315-5413
62E84AV☐☐☐1134☐☐0GSS06-2M☐☐☐112C2214.2860.9390235247-4210
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2214.2861.4392237247-4210
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2215.5001.2416249228-399.5
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2217.3601.1467279203-358.5
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2222.1431.1596354159-276.6
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2227.1251.0729430130-225.4
62E84AV☐☐☐1134☐☐0GSS07-2M☐☐☐112C2235.3060.9949553100-174.2
V00-en_GB-12/20136.10 - 58
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 15.00 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐1534☐☐0GSS07-2M☐☐☐132C1210.0001.1371225356-6015
62E84AV☐☐☐1534☐☐0GSS07-2M☐☐☐132C1211.2001.1416253318-5413
62E84AV☐☐☐1534☐☐0GSS07-2M☐☐☐132C1214.2861.0532322249-4210
6.10 - 59V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Selection tables
ƒ 120 Hz: PN = 18.50 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
62E84AV☐☐☐1834☐☐0GSS07-2M☐☐☐132C2210.0000.9459280356-6015
V00-en_GB-12/20136.10 - 60
GSS helical-worm gearboxesTechnical data
6.10
6.10 - 61V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-2M H☐R
V00-en_GB-12/20136.10 - 62
GSS helical-worm gearboxesTechnical data
6.10
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k479420397377GSS04
551501441419399GSS05592591541481459439GSS06
727635634584524GSS07
p1)oh1h1)a
1711817110020GSS04
2052128012523GSS05
25025510015026GSS06
31030512019033GSS07
s1f1e1b1a1i1tul1l1)d1d
H7+0,2JS9H7
M6x12390751042.52.5
28.333.3
88
100100
115115
4545
2530
GSS04
M8x1541008011844
33.338.3
810
124124
140140
5050
3035
GSS05
M10x16412010014055
43.348.8
1214
140140
160160
6565
4045
GSS06
M12x18514011516555
53.859.3
1416
175175
200200
7575
5055
GSS07
s5nmf6f5e5c5b7b6b5a6a5
922201411121001485119904545GSS04
112921169124115171051409547.547.5GSS05
143623206156145201201701206060GSS06
184528255185180251502101407070GSS07
k2 !1)
6.10 - 63V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-2M HAK
V00-en_GB-12/20136.10 - 64
GSS helical-worm gearboxesTechnical data
6.10
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k479420397377GSS04
551501441419399GSS05592591541481459439GSS06
727635634584524GSS07
qp1)ok8h1h1)a
91171181417110020GSS04
103.5205212408012523GSS05
121.52502554910015026GSS06
155.531030565.512019033GSS07
s2f2e2c2b2a2o11)i2tul1ld1d
j7+0,2JS9H7
4 x 93.513010110160148.5148.5
33.533.5
28.333.3
88
100100
115115
4545
2530
GSS04
4 x 11416512130200173.5173.5
3333
33.338.3
810
124124
140140
5050
3035
GSS05
4 x 114 x 14
3.54
165215
1215
130180
200250
201.5201.5
4241
43.348.8
1214
140140
160160
6565
4045
GSS06
4 x 144 x 14
44
215265
1517
180230
250300
255.5255.5
5555
53.859.3
1416
175175
200200
7575
5055
GSS07
k2 !1)
6.10 - 65V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-2M V☐R
V00-en_GB-12/20136.10 - 66
GSS helical-worm gearboxesTechnical data
6.10
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k479420397377GSS04
551501441419399GSS05592591541481459439GSS06
727635634584524GSS07
qp1)oh1h1)a
107.51711817110020GSS04
1302052128012523GSS05
16025025510015026GSS06
20031030512019033GSS07
s1f1e1b1a1o11)i1tul2l1ld2d1d
H7k6
M6x1239075104162.552.528840650M104525GSS04
M8x15410080118196.56433845660M104530GSS05
M10x164120100140235.585431263780M166540GSS06
M12x185140115165295.510553.514808100M167550GSS07
s5nmf6f5e5c5b7b6b5a6a5
922201411121001485119904545GSS04
112921169124115171051409547.547.5GSS05
143623206156145201201701206060GSS06
184528255185180251502101407070GSS07
k2 !1)
6.10 - 67V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-2M VAK
V00-en_GB-12/20136.10 - 68
GSS helical-worm gearboxesTechnical data
6.10
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k479420397377GSS04
551501441419399GSS05592591541481459439GSS06
727635634584524GSS07
qp1)ok8h1h1)a
91171181417110020GSS04
103.5205212408012523GSS05
121.52502554910015026GSS06
155.531030565.512019033GSS07
s2f2e2c2b2a2o11)i2tul2l1ld2d
j7k6
4 x 93.513010110160195.55028840650M1025GSS04
4 x 11416512130200229.56033845660M1030GSS05
4 x 14421515180250276.580431263780M1640GSS06
4 x 144 x 14
44
215265
1517
180230
250300
350.510053.514808100M1650GSS07
k2 !1)
6.10 - 69V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-3M H☐R
V00-en_GB-12/20136.10 - 70
GSS helical-worm gearboxesTechnical data
6.10
090C32080C42080C32071C32063C32071C42063C42
176156139123g157150109100MFEMAXX
g1 137132118107MFEMABR274224.5207187MFEMAXXk1180145120k268735240MFEMABR
Δ k 128MFFMAXX181183165170MFFMABR
k475GSS05
575552532GSS06688629606586GSS07
poh1ha
2052098012513GSS05
25025210015010GSS06
31029912019012GSS07
s1f1e1b1a1i1tul1ld1d
H7+0,2JS9H7
M8x1541008011844
33.338.3
810
124124
140140
5050
3035
GSS05
M10x16412010014055
43.348.8
1214
140140
160160
6565
4045
GSS06
M12x18514011516555
53.859.3
1416
175175
200200
7575
5055
GSS07
s5nmf6f5e5c5b7b6b5a6a5
112921169124115171051409547.547.5GSS05
143623206156145201201701206060GSS06
184528255185180251502101407070GSS07
6.10 - 71V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-3M HAK
V00-en_GB-12/20136.10 - 72
GSS helical-worm gearboxesTechnical data
6.10
090C32080C42080C32071C32063C32071C42063C42
176156139123g157150109100MFEMAXX
g1 137132118107MFEMABR274224.5207187MFEMAXXk1180145120k268735240MFEMABR
Δ k 128MFFMAXX181183165170MFFMABR
k475GSS05
575552532GSS06688629606586GSS07
qpok8h1ha
103.5205209408012513GSS05
121.52502524910015010GSS06
155.531029965.512019012GSS07
s2f2e2c2b2a2o1i2tul1ld1d
j7+0,2JS9H7
4 x 11416512130200173.5173.5
3333
33.338.3
810
124124
140140
5050
3035
GSS05
4 x 114 x 14
3.54
165215
1215
130180
200250
201.5201.5
4241
43.348.8
1214
140140
160160
6565
4045
GSS06
4 x 144 x 14
44
215265
1517
180230
250300
255.5255.5
5555
53.859.3
1416
175175
200200
7575
5055
GSS07
6.10 - 73V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-3M V☐R
V00-en_GB-12/20136.10 - 74
GSS helical-worm gearboxesTechnical data
6.10
090C32080C42080C32071C32063C32071C42063C42
176156139123g157150109100MFEMAXX
g1 137132118107MFEMABR274224.5207187MFEMAXXk1180145120k268735240MFEMABR
Δ k 128MFFMAXX181183165170MFFMABR
k475GSS05
575552532GSS06688629606586GSS07
qpoh1ha
1302052098012513GSS05
16025025210015010GSS06
20031029912019012GSS07
s1f1e1b1a1o1i1tul2l1ld2d1d
H7k6
M8x15410080118196.56433845660M104530GSS05
M10x164120100140235.585431263780M166540GSS06
M12x185140115165295.510553.514808100M167550GSS07
s5nmf6f5e5c5b7b6b5a6a5
112921169124115171051409547.547.5GSS05
143623206156145201201701206060GSS06
184528255185180251502101407070GSS07
6.10 - 75V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
Dimensions
GSS☐☐-3M VAK
V00-en_GB-12/20136.10 - 76
GSS helical-worm gearboxesTechnical data
6.10
090C32080C42080C32071C32063C32071C42063C42
176156139123g157150109100MFEMAXX
g1 137132118107MFEMABR274224.5207187MFEMAXXk1180145120k268735240MFEMABR
Δ k 128MFFMAXX181183165170MFFMABR
k475GSS05
575552532GSS06688629606586GSS07
qpok8h1ha
103.5205209408012513GSS05
121.52502524910015010GSS06
155.531029965.512019012GSS07
s2f2e2c2b2a2o1i2tul2l1ld2d
j7k6
4 x 11416512130200229.56033845660M1030GSS05
4 x 14421515180250276.580431263780M1640GSS06
4 x 144 x 14
44
215265
1517
180230
250300
350.510053.514808100M1650GSS07
6.10 - 77V00-en_GB-12/2013
GSS helical-worm gearboxesTechnical data
6.10
V00-en_GB-12/20136.10 - 78
GSS helical-worm gearboxesTechnical data
6.10
Hollow shaft with shrink disc
l4l1lk11k10k9i1g4g3g2d
h6
261221421541481502.57679722530
GSS04
281481681791741764.084908035GSS05
301641942042002025.0
941009040GSS06
2619223224423824111612411050GSS07
ƒ Output flange and hollow shaft with shrink disc (output versionSAK) are not possible in the same location. For additional dimen-sions see output version H☐☐.
ƒ Ensure that the strength of the machine shaft material is ad-equate in shrink disc designs.When using typical steels, e.g. C45, 42CrMo4, the torques listedin the selection tables can be used without restriction.Please consult us if you wish to use material that is considerablyweaker. Medium surface roughness Rz must not exceed 15 µm(turning is sufficient).
6.10 - 79V00-en_GB-12/2013
GSS helical-worm gearboxesAccessories
6.10
Mounting set for hollow shaft circlip:Proposed design for auxiliary tools
l8, maxc9c8c7l9d2l1d
H7
85
310
5
40M10100
2530
GSS04
6
1071243035
GSS0512750M12
118416
8
60M16140
4045
GSS069
148510
1755055
GSS07201180M20
V00-en_GB-12/20136.10 - 80
GSS helical-worm gearboxesAccessories
6.10
Hoseproof hollow shaft cover
ƒ Cover including gasket
k11[mm]
9GSS04
10GSS05
11GSS06
GSS07
Gearboxes with 2nd output shaft end
o1i1ld
k6
21552.55025GSS04
26064.06030GSS05
32085.08040GSS06
400105.010050GSS07
6.10 - 81V00-en_GB-12/2013
GSS helical-worm gearboxesAccessories
6.10
Torque plate on threaded pitch circle
In position 3
In position 5
k6Ddb4a9a8a7a4
16351234.526.513024.030GSS04
15451638.527.516023.534GSS05
18502044.533.020028.040GSS06
21652550.537.525032.546GSS07
V00-en_GB-12/20136.10 - 82
GSS helical-worm gearboxesAccessories
6.10
Torque plate at housing foot
In position 2, 4 or 6
k7e5Ddcb8a9a8a7a4
20100301114.560135.010627.541GSS04
25127401315.070160.011535.045GSS05
28145501727.080195.014540.072GSS06
35180602128.0100240.017050.078GSS07
6.10 - 83V00-en_GB-12/2013
GSS helical-worm gearboxesAccessories
6.10
Ventilations
Position of ventilation, sealing elements and oil level check
GSS05…07-2
Item 1 standardA ... FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GSS05-2M☐☐☐ 090C☐☐◒ Oil control plug • GSS05-2M☐☐☐ 100C☐☐* On both sides • GSS06-2M☐☐☐ 112C☐☐** On opposite side • GSS07-2M☐☐☐ 160C☐☐
V00-en_GB-12/20136.10 - 84
GSS helical-worm gearboxesAccessories
6.10
Ventilations
Position of ventilation, sealing elements and oil level check
GSS05…07-3
Item 1 standardA ... FMounting positionItem 2 only on:⊗ Ventilation / Oil filler plug
● Oil drain plug • GSS07-3M☐☐☐ 090C☐☐◒ Oil control plug • GSS07-3M☐☐☐ 100C☐☐* On both sides** On opposite side
6.10 - 85V00-en_GB-12/2013
GSS helical-worm gearboxesAccessories
6.10
V00-en_GB-12/20136.10 - 86
GSS helical-worm gearboxesAccessories
6.10
6.10 - 87V00-en_GB-12/2013
GSS helical-worm gearboxesAccessories
6.10
V00-en_GB-12/20136.10 - 88
GSS helical-worm gearboxesAccessories
6.10
MF three-phase ACmotors0.55 to 22 kW
Motors
6.11 - 4List of abbreviationsGeneral information
6.11 - 5Product key
6.11 - 6Product information
6.11 - 7Functions and features
6.11 - 10Motor – inverter assignment
6.11 - 11Dimensioning
6.11 - 13Standards and operating conditionsTechnical data
6.11 - 14Rated data for 120 Hz
6.11 - 15Dimensions, self-ventilated (4-pole)
6.11 - 16Dimensions, forced ventilated (4-pole)
6.11 - 17Dimensions, 8400 motec inverter
6.11 - 19Spring-applied brakeAccessories
6.11 - 31Resolver
6.11 - 32Incremental encoder and SinCos absolute value encoder
6.11 - 33Blowers
6.11 - 35Temperature monitoring
6.11 - 37Terminal box
6.11 - 42Plug connectors
6.11 - 42ICN connector
6.11 - 51M12 connector
6.11 - 52HAN connector
6.11 - 572nd shaft end
6.11 - 58Protection cover
MF three-phase AC motorsContents
6.11
List of abbreviations
Max. mains voltage[V]UmaxEfficiency[%]η100 %Efficiency[%]η75 % Min. mains voltage[V]Umin
Rated voltage[V]UN, ΔEfficiency[%]η50 %Power factorcos ϕ Rated voltage[V]UN, YRated current[A]INMax. current consumption[A]ImaxMoment of inertia[kgcm²]JMass[kg]mStarting torque[Nm]MaStalling torque[Nm]MbMax. torque[Nm]MmaxRated torque[Nm]MNRated speed[r/min]nNRated power[kW]PNMax. power input[kW]Pmax
Communauté EuropéenneCECanadian Standards AssociationCSADeutsches Institut für Normung e.V.DINElectromagnetic compatibilityEMCEuropean standardENInternational Electrotechnical CommissionIECInternational Mounting CodeIMInternational Protection CodeIPNational Electrical Manufacturers AssociationNEMAUnderwriters Laboratory Listed ProductULUnderwriters Laboratory Recognized ProductURVerband deutscher Elektrotechniker (Association ofGerman Electrical Engineers)
VDE
China Compulsory CertificateCCCCertificate for Russian FederationGOSTCombined certification marks of UL for the USA andCanada
cURus
Certificate for UkraineUkrSEPRO
V01-en_GB-02/20146.11 - 4
MF three-phase AC motorsGeneral information
6.11
Product key
6.11 - 5V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
Product information
Special motors have been designed for direct attachment to Lenzegearboxes.
Thesemotors are attached to the gearboxwithout theuse of a clutch.Torque transmission between the toothing and the motor shaft isfriction-locked via a tapered connection here.Thismotor designmeans that the gearedmotors only require a smallinstallation space.
OptionsL-forceMF three-phaseACmotors are available in apower range from0.55 to 22 kW and have been fully optimised for inverter operation. • Various brake sizes – each available with several braking torques
– can be combined with the three-phase AC motors.The benefits for you: • The LongLife version of the brake can easily reach 10 x 106
switching cycles.• Up to sizes smaller than standard three-phase AC motors• A resolver and various incremental and absolute value encoderscan be fitted for speed and position detection.
• The motors exceed the minimum efficiency levels of efficiencyclass IE2
• Large speed setting range: 1:24 (without field weakening) • For fast commissioning, themotors are also availablewith connect-ors for the power connection, brake, blower and feedback.• Dynamic thanks to a lowmoment of inertia
• Instead of an integral fan, the motor can optionally be equippedwith a blower. No torque reduction is then necessary, even atspeeds below 20 Hz.
Basic versions• The thermal sensors integrated as standard allow for permanenttemperature monitoring and are coordinated to the motor wind-ing's temperature class F (155°C).
• For drive tasks in decentralised applications, the motor can beordered with the motec inverter connected to the terminal box.
• Themotors of the basic version are adapted to ambient conditionsby enclosure IP55.
• The motors are available with cURus, GOST-R, CCC and UkrSeproapproval.
• Smooth start/braking is possible by increasing themotor's centri-fugal mass with a cast iron fan.
• In toughoperating conditions, the surface and corrosionprotectionsystem is provided to reliably protect the motor from corrosivemedia. • The motor can be equipped with a handwheel for manual setup
or emergency operations.• To protect the fan from falling objects, the fan cover can beequipped with a protection cover.
• A 2nd shaft end is available for further modifications.
V01-en_GB-02/20146.11 - 6
MF three-phase AC motorsGeneral information
6.11
Functions and features
Size
090080071063MotorSpring-applied brake
Standard or LongLife designStandard or LongLife designDesignReduced, standard or increased braking torqueReduced or standard braking torque
With rectifierWith rectifierWith manual release leverWith manual release lever
Low noiseLow noiseFeedback
ResolverDesignIncremental encoder
Absolute value encoder (multi-turn)Thermal sensor
TKOThermal contact
KTY83-110Thermal detectorKTY84-130
PTCPTC thermistorMotor connection
Terminal boxPower connectionICN connector
HAN10E connectorHANmodular connector
Terminal boxBrake connectionICN connector
HANmodular connectorHAN10E connector
Terminal boxBlower connectionICN connector
Terminal boxFeedback connectionICN connector
Terminal boxTemperature sensor connectionTKO or PTC at connector in the power connectionKTY at connector in the feedback connection
Shaft bearings
Standard motors (B3, B5, B14): side BPosition of the locating bearingMotors for gearbox direct mounting: side A
Deep-groove ball bearing with high-temperature resistant grease, 2 sealing discs or cover platesBearing typeColour
Not coatedPrimed
Paint in various corrosion-protection designs in accordance with RAL coloursFurther options
Protection coverProtection cover2nd shaft end
6.11 - 7V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
Functions and features
Size
132112100MotorSpring-applied brake
Standard designStandard or LongLife designDesignReduced, standard or increased braking torqueReduced, standard or increased
braking torque With rectifierWith rectifier With manual release lever
With manual release lever Low noiseLow noise
Feedback
ResolverDesignIncremental encoder
Absolute value encoder (multi-turn)Thermal sensor
TKOThermal contact
KTY83-110Thermal detectorKTY84-130
PTCPTC thermistorMotor connection
Terminal boxTerminal boxTerminal boxPower connectionHANmodular connectorICN connector
HAN10E connectorHANmodular connector
Terminal boxTerminal boxTerminal boxBrake connectionHANmodular connectorICN connector
HANmodular connectorHAN10E connector
Terminal boxBlower connectionICN connector
Terminal boxFeedback connectionICN connector
Terminal boxTerminal boxTemperature sensor connectionKTY at connector in the feedback connectionTKO or PTC at connector in the
power connectionKTY at connector in the feedback
connectionShaft bearings
Standard motors (B3, B5, B14): side BPosition of the locating bearingMotors for gearbox direct mounting: side A
Deep-groove ball bearing with high-temperature resistant grease, 2 sealing discs or cover platesBearing typeColour
Not coatedPrimed
Paint in various corrosion-protection designs in accordance with RAL coloursFurther options
Protection cover2nd shaft end
V01-en_GB-02/20146.11 - 8
MF three-phase AC motorsGeneral information
6.11
Functions and features
Surface and corrosion protection
Various surface coatings ensure that themotors operate reliably evenat high air humidity, in outdoor installation or in the presence of at-
For optimum protection of three-phase AC motors against ambientconditions, the surface and corrosion protection system (OKS) offerstailor-made solutions. mospheric impurities. Any colour from the RAL Classic collection can
be chosen for the top coat. The three-phase AC motors are alsoavailable unpainted (no surface and corrosion protection).
MeasuresApplicationsSurface and corrosion protec-tion systemOKS-G(primed)
•• 2K PUR priming coat (grey)Dependent on subsequent top coat applied
OKS-S(small)
••
Surface coating as per corrosivity category C1 (inline with EN 12944-2)
Standard applications• Internal installation in heated buildings• Air humidity up to 90%
OKS-M(medium)
••
Surface coating as per corrosivity category C2 (inline with EN 12944-2)
Internal installation in non-heated buildings• Covered, protected external installation• Air humidity up to 95%
OKS-L(high)
•
•
Surface coating as per corrosivity category C3 (inline with EN 12944-2)
External installation• Air humidity above 95%
• Blower cover andB end shield additionally primed
• Chemical industry plants•
•
Food industry
Screws zinc-coated• Cable glands with gaskets• Corrosion-resistant brakewith cover ring, stainlessfriction plate, and chrome-plated armature plate(on request)
Optional measures:• Motor recesses sealed off (on request)
Structure of surface coating
ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system
StructureDIN EN ISO 12944-2
Without OKS(uncoated)
2K PUR priming coatOKS-G(primed)
Standard: RAL 7012Optional: RAL Classic
2K-PUR top coatC1OKS-S(small)
2K PUR priming coat2K-PUR top coat
C2OKS-M(medium)
C3OKS-L(high)
6.11 - 9V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
Motor – inverter assignment
Rated frequency 120 Hz
ƒ Decentralised inverter 8400 motec (E84DVB)ƒ Inverter Drives 8400 (E84AV)
Product keyRated power
InverterMotor
PN[kW]
E84DVB☐5514S☐☐☐2☐MF☐☐☐☐☐063-320.55
E84DVB☐7514S☐☐☐2☐MF☐☐☐☐☐063-420.75
E84DVB☐1124S☐☐☐2☐MF☐☐☐☐☐071-321.10
E84DVB☐1524S☐☐☐2☐MF☐☐☐☐☐071-421.50
E84DVB☐2224S☐☐☐2☐MF☐☐☐☐☐080-322.20
E84DVB☐3024S☐☐☐2☐MF☐☐☐☐☐080-423.00
E84DVB☐4024S☐☐☐2☐MF☐☐☐☐☐090-324.00
E84DVB☐5524S☐☐☐2☐MF☐☐☐☐☐100-125.50
E84DVB☐7524S☐☐☐2☐MF☐☐☐☐☐100-327.50
MF☐☐☐☐☐112-2211.0
MF☐☐☐☐☐132-1215.0
MF☐☐☐☐☐132-2218.5
MF☐☐☐☐☐132-3222.0
V01-en_GB-02/20146.11 - 10
MF three-phase AC motorsGeneral information
6.11
Dimensioning
Torque derating at lowmotor frequencies
Motor size-dependent torque reduction, taking into account thethermal response during operation on the inverter.
Torque characteristics
A = Operation with integral fan and brakeB = Operation with integral fan and brake control "Holding currentreduction"
ƒ Themotor specifications stated in this catalogue for inverter op-eration apply to operationwith a Lenze inverter. If you are uncer-tain, get in touch with the manufacturer of the inverter to askwhether thedevice is capableof driving themotorwith the statedspecifications (e.g. setting range, base frequency).
You can use the Drive Solution Designer for precise drive dimension-ing.
The Drive Solution Designer helps you to carry out a fast and high-quality drive dimensioning.The software includes well-founded and proven knowledge on driveapplications and electro-mechanical drive components.
Please contact your Lenze sales office.
6.11 - 11V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
V01-en_GB-02/20146.11 - 12
MF three-phase AC motorsGeneral information
6.11
Standards and operating conditions
Enclosure
IP55EN 60529Approval
cURusClassCCC
GOST-RUkrSepro
Temperature class
BIEC/EN 60034-1; utilisation
FIEC/EN60034-1; insulationsystem(enamel-insu-lated wire)Min. ambient operating temperature
-20[°C]Topr,minMax. ambient operating temperature
40[°C]Topr,max
60[°C]Topr,maxWith power reductionSite altitude
4000[m]HmaxAmslMax. speed
4500[r/min]nmax
6.11 - 13V01-en_GB-02/2014
MF three-phase AC motorsTechnical data
6.11
Rated data for 120 Hz
4-pole motors
IN, YUN, YIN, ΔUN, ΔnNPN± 10 %± 10 %
[A][V][A][V][r/min][kW]
1.803453.2020034400.55MF☐☐☐☐☐063-322.303704.0021034000.75MF☐☐☐☐☐063-423.203455.5020034901.10MF☐☐☐☐☐071-323.903606.8020534501.50MF☐☐☐☐☐071-425.303459.1020035002.20MF☐☐☐☐☐080-326.6037011.421034803.00MF☐☐☐☐☐080-428.5037034804.00MF☐☐☐☐☐090-3212.934035255.50MF☐☐☐☐☐100-1215.937535157.50MF☐☐☐☐☐100-3223.5370353011.0MF☐☐☐☐☐112-2231.2370356015.0MF☐☐☐☐☐132-1239.0360356018.5MF☐☐☐☐☐132-2244.5380355022.0MF☐☐☐☐☐132-32
m 1)J 1)η100 %η75 %cos ϕMmaxMN
[kg][kgcm²][%][%][Nm][Nm]
4.403.7075.075.00.686.001.53MF☐☐☐☐☐063-324.403.7079.679.60.698.002.11MF☐☐☐☐☐063-426.4012.881.481.40.7712.03.01MF☐☐☐☐☐071-326.4012.882.882.80.8016.04.15MF☐☐☐☐☐071-4211.028.084.384.30.8624.06.00MF☐☐☐☐☐080-3211.028.085.585.50.8632.08.20MF☐☐☐☐☐080-4218.032.086.687.00.8544.010.9MF☐☐☐☐☐090-3226.561.087.787.90.8160.014.9MF☐☐☐☐☐100-1226.561.088.788.90.8180.020.3MF☐☐☐☐☐100-3238.010789.889.80.7812029.7MF☐☐☐☐☐112-2266.033690.688.90.8416040.3MF☐☐☐☐☐132-1266.033691.289.90.8420049.6MF☐☐☐☐☐132-2266.033691.690.50.8324059.2MF☐☐☐☐☐132-32
Without accessories1)
V01-en_GB-02/20146.11 - 14
MF three-phase AC motorsTechnical data
6.11
Dimensions, self-ventilated (4-pole)
Motor type
MFEMARSMFEMAIG
MFEMABSMFEMABIMFEMABRMFEMAXX
MFEMAAGMFEMABA
Motor framesize
Δ kΔ kΔ kΔ k
[mm][mm][mm][mm]
5610340
0
063-32063-42
529652071-32071-42
11111173080-32080-42
8710568090-32
8110176100-12100-32
8012090112-22
103125110132-12132-22132-32
6.11 - 15V01-en_GB-02/2014
MF three-phase AC motorsTechnical data
6.11
Dimensions, forced ventilated (4-pole)
Motor type
MFFMARSMFFMAIG
MFFMABSMFFMABIMFFMABRMFFMAXX
MFFMAAGMFFMABA
Motor frame size
P6n3m2g3k4Δ kΔ kΔ kΔ k
[mm][mm][mm][mm][mm][mm][mm][mm][mm]
1xM16x1.5
10595115
12
128
170170
128
063-32063-42
122165165071-32071-42
1069613213183183080-32080-42
10595
141
22
181181090-32
150109170170109100-12100-32
162183183183102112-22
18232202202202115132-12132-22132-32
V01-en_GB-02/20146.11 - 16
MF three-phase AC motorsTechnical data
6.11
Dimensions, 8400 motec inverter
Rated frequency 120 Hz
Product key
InverterMotor
x120Hzn2, 120Hzm1, 120Hzg1, 120Hz[mm][mm][mm][mm]
18.8
161241
154E84DVB☐5514S☐☐☐2☐MF☐☐☐☐☐063-32E84DVB☐7514S☐☐☐2☐MF☐☐☐☐☐063-42
21.0163E84DVB☐1124S☐☐☐2☐MF☐☐☐☐☐071-32E84DVB☐1524S☐☐☐2☐MF☐☐☐☐☐071-42
24.5176260201E84DVB☐2224S☐☐☐2☐MF☐☐☐☐☐080-32E84DVB☐3024S☐☐☐2☐MF☐☐☐☐☐080-42
16.0
195325
261E84DVB☐4024S☐☐☐2☐MF☐☐☐☐☐090-32
17.1272E84DVB☐5524S☐☐☐2☐MF☐☐☐☐☐100-12E84DVB☐7524S☐☐☐2☐MF☐☐☐☐☐100-32
6.11 - 17V01-en_GB-02/2014
MF three-phase AC motorsTechnical data
6.11
V01-en_GB-02/20146.11 - 18
MF three-phase AC motorsTechnical data
6.11
Spring-applied brake
Three-phaseACmotors canbe fittedwith a spring-appliedbrake. Thisis activated after the supply voltage is switched off (closed-circuitprinciple). For optimumadjustment of the brakemotor to the applic-ation, a range of braking torques and control modes is available forevery motor frame size. For applications with very high operatingfrequencies the brake is also available in a LongLife version, with re-inforced mechanical brake components.
Features
ControlVersions• DC supply• Standard
- 1 x 106 repeating switching cycles • AC supply via rectifier in the terminal box- 1 x 106 reversing switching cycles
Enclosure• LongLife- 10 x 106 repeating switching cycles • Without manual release IP55- 15 x 106 reversing switching cycles • With manual release IP54
Friction lining• Non-asbestos, low wearing
Options• Manual release• UL/CSA approval• Noise-reduced
Motor – brake assignment
Design
LongLifeStandard
Rated torqueSizeRated torqueSizeMotor frame size
BrakeBrake
MkMk
[Nm][Nm]
4.00062.504.00
0606
063-32063-42
4.003.50
0608
2.504.00
0606071-32
3.5008
4.003.50
0608
2.504.00
0606
071-428.0008
3.50088.0008
8.007.00
0810
3.508.00
0808080-32
7.0010
8.007.00
0810
3.508.00
0808
080-4216.010
7.001016.010
6.11 - 19V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Motor – brake assignment
Design
LongLifeStandard
Rated torqueSizeRated torqueSizeMotor frame size
BrakeBrake
MkMk
[Nm][Nm]
8.007.00
0810
3.508.00
0808
090-3216.010
7.001016.01023.010
16.014.0
1012
7.0016.0
1010
100-12
32.012
14.01232.0127.0016.0
1010
100-32 14.01232.01246.01214.032.0
1212
112-2235.01460.01435.060.0
1414
132-1260.01680.01635.060.0
1414
132-22132-32
60.01680.01610016
V01-en_GB-02/20146.11 - 20
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Direct connection without rectifier
If the brake is activated directly without a rectifier, a freewheelingdiode or a spark suppressor is required to protect against inductionpeaks.• Supply voltagesDC 24 VDC 180 VDC 205 V
Connection via mains voltage with brake rectifier
If the brake is not directly supplied with DC voltage, a rectifier is re-quired. This is included in the scope of supply and is located in theterminal box of the motor. The rectifier converts the AC voltage ofthe connection intoDC voltage. The following rectifiers are available:
Half-wave rectifier, 6-pole• Ratio of supply voltage to brake coil voltage = 2.22• Approved by UL/CSA• Supply voltagesAC 230 VAC 400 VAC 460 V
Bridge rectifier, 6-pole• Ratio of supply voltage to brake coil voltage = 1.11• Supply voltageAC 230 V
Bridge/half-wave rectifier, 6-pole• Ratio of supply voltage to brake coil voltageup to overexcitation time = 1.11beyond overexcitation time = 2.22
Supply voltages:• AC 230 V• AC 400 V
6.11 - 21V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Connection via mains voltage with brake rectifier
Bridge/half-wave rectifier, 6-pole• Ratio of supply voltage to brake coil voltageup to overexcitation time = 1.11beyond overexcitation time = 2.22
Supply voltages:• AC 230 V• AC 400 V
During the switching operation the bridge/half-wave rectifier func-tions as a bridge rectifier for the overexcitation time tü and then asa half-wave rectifier. This combination optimises the performanceof the brake – depending on the assignment of brake coil voltage andsupply voltage:
• Holding current reduction (cold brake)• Short-time overexcitation of the brake coilBy reducing the holding current, the bridge/half-wave rectifier isable to reduce the power input to the open brake. As the brakeheats up less, this type of activation is known as "cold brake".
Activating the brake coil for the overexcitation time tüwith twicethe rated voltage allows the disengagement time to be reduced.The brake opens more quickly and wear on the friction lining isreduced.These features make this activation version particularly suitablefor lifting applications. It is therefore only available in combinationwith a brake with increased braking torque.
V01-en_GB-02/20146.11 - 22
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Permissible friction energy
Q =Switching energy per switching cycleSh =Operating frequencyBrake size = 06 to 25
6.11 - 23V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with reduced braking torque
ƒ Please enquire for braking torques andmaximumswitchingworkvalues not listed here.
Size
252018161412100806Power input
0.110.100.0850.0550.0500.0400.0300.0250.020[kW]PinBraking torque
26514580.060.035.014.07.003.502.50[Nm]MB100
20311565.050.030.012.06.103.102.30[Nm]MB1000
19911263.048.029.012.06.003.102.30[Nm]MB1200
193 1)109 1)61.047.028.011.05.803.002.20[Nm]MB1500
60.0 1)46.028.011.05.702.902.10[Nm]MB1800
43.0 1)26.0 1)10.05.302.802.00[Nm]MB3000
10.0 1)5.202.702.00[Nm]MB3600Maximum switching energy
12080.060.036.030.024.012.07.503.00[KJ]QE100
12080.060.036.030.024.012.07.503.00[KJ]QE1000
12080.060.036.030.024.012.07.503.00[KJ]QE1200
36.0 1)24.0 1)60.036.030.024.012.07.503.00[KJ]QE1500
36.0 1)36.030.024.012.07.503.00[KJ]QE1800
11.0 1)18.0 1)24.012.07.503.00[KJ]QE3000
7.00 1)12.07.503.00[KJ]QE3600Transition operating frequency
15.019.020.027.028.030.040.050.079.0[1/h]ShüMoment of inertia
20.07.302.901.500.630.450.200.0610.015[kgcm²]JMass
31.019.512.68.705.804.202.601.500.90[kg]m
In the regionof the load limit the value for friction energyQBW canbe reducedto 40 %.
1)
V01-en_GB-02/20146.11 - 24
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with reduced braking torque
ƒ Activation via half-wave or bridge rectifier
Size
252018161412100806Friction energy
352223221542966761706264210113[MJ]QBWDelay time
26447.032.053.037.021.020.014.011.0[ms]t11EngagingRise time
12010020.030.022.019.017.010.013.0[ms]t12Braking torqueEngagement time
38414752.083.059.040.037.024.0[ms]t1Disengagement time
26920723016914865.057.037.035.0[ms]t2
ƒ Activation via bridge/half-wave rectifier
Design
Holding current reduction (cold brake)Size
252018161412100806Friction energy
352223221542966761706264210113[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
30412683.011461.049.035.022.012.0[ms]t11EngagingRise time
13826952.065.037.045.030.016.014.0[ms]t12Braking torqueEngagement time
44339513418097.093.066.038.026.0[ms]t1Disengagement time
26920723016914865.057.037.035.0[ms]t2
ƒ The brake response and application times are guide values. Theengagement time is 10 times longer with AC-side switching.With themaximumair gap thedisengagement time t2–depend-ing on the brake and control – is up to 4 times longer than thedisengagement time with the rated air gap.
6.11 - 25V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with standard braking torque
ƒ Please enquire for braking torques andmaximumswitchingworkvalues not listed here.
Size
252018161412100806Power input
0.110.100.0850.0550.0500.0400.0300.0250.020[kW]PinBraking torque
40026015080.060.032.016.08.004.00[Nm]MB100
30720612166.051.027.014.07.203.70[Nm]MB1000
30020111865.050.027.014.07.003.60[Nm]MB1200
291 1)195 1)11563.048.026.013.06.803.50[Nm]MB1500
112 1)61.047.026.013.06.703.40[Nm]MB1800
57.0 1)44.0 1)24.012.06.303.20[Nm]MB3000
23.0 1)12.06.103.20[Nm]MB3600Maximum switching energy
12080.060.036.030.024.012.07.503.00[KJ]QE100
12080.060.036.030.024.012.07.503.00[KJ]QE1000
12080.060.036.030.024.012.07.503.00[KJ]QE1200
36.0 1)24.0 1)60.036.030.024.012.07.503.00[KJ]QE1500
36.0 1)36.030.024.012.07.503.00[KJ]QE1800
11.0 1)18.0 1)24.012.07.503.00[KJ]QE3000
7.00 1)12.07.503.00[KJ]QE3600Transition operating frequency
15.019.020.027.028.030.040.050.079.0[1/h]ShüMoment of inertia
20.07.302.901.500.630.450.200.0610.015[kgcm²]JMass
31.019.512.68.705.804.202.601.500.90[kg]m
In the regionof the load limit the value for friction energyQBW canbe reducedto 40 %.
1)
V01-en_GB-02/20146.11 - 26
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with standard braking torque
ƒ Activation via half-wave or bridge rectifier
Size
252018161412100806Friction energy
35222322154296657153026415885.0[MJ]QBWDelay time
11065.033.027.017.028.015.0[ms]t11EngagingRise time
12010045.030.025.019.016.013.0[ms]t12Braking torqueEngagement time
23016578.057.042.053.047.031.028.0[ms]t1Disengagement time
39034027022021011576.057.045.0[ms]t2
ƒ Activation via bridge/half-wave rectifier
Design
Holding current reduction (cold brake)Size
252018161412100806Friction energy
35222322154296657153026415885.0[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
15410280.058.033.048.031.025.016.0[ms]t11EngagingRise time
16815710964.049.043.021.027.014.0[ms]t12Braking torqueEngagement time
32225918912282.090.052.030.0[ms]t1Disengagement time
39034027022021011576.057.045.0[ms]t2
ƒ The brake response and application times are guide values. Theengagement time is 10 times longer with AC-side switching.With themaximumair gap thedisengagement time t2–depend-ing on the brake and control – is up to 4 times longer than thedisengagement time with the rated air gap.
6.11 - 27V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with increased braking torque
ƒ Please enquire for braking torques andmaximumswitchingworkvalues not listed here.
Size
25252020181616141210Power input
0.110.110.100.100.0850.0550.0550.0500.0400.030[kW]PinBraking torque
60049040031520012510075.046.023.0[Nm]MB100
46137631724916210383.064.039.020.0[Nm]MB1000
44936730924415810181.062.039.020.0[Nm]MB1200
436 1)356 1)300 1)237 1)15398.078.060.038.019.0[Nm]MB1500
150 1)96.077.059.037.019.0[Nm]MB1800
89.0 1)71.0 1)55.0 1)34.017.0[Nm]MB3000
33.0 1)17.0[Nm]MB3600Maximum switching energy
12012080.080.060.036.036.030.024.012.0[KJ]QE100
12012080.080.060.036.036.030.024.012.0[KJ]QE1000
12012080.080.060.036.036.030.024.012.0[KJ]QE1200
36.0 1)36.0 1)24.0 1)24.0 1)60.036.036.030.024.012.0[KJ]QE1500
36.0 1)36.036.030.024.012.0[KJ]QE1800
11.0 1)11.0 1)18.0 1)24.012.0[KJ]QE3000
7.00 1)12.0[KJ]QE3600Transition operating frequency
15.015.019.019.020.027.027.028.030.040.0[1/h]ShüMoment of inertia
20.020.07.307.302.901.501.500.630.450.20[kgcm²]JMass
31.031.019.519.512.68.708.705.804.202.60[kg]m
In the regionof the load limit the value for friction energyQBW canbe reducedto 40 %.
1)
ƒ Activation via half-wave or bridge rectifier
Size
25201816141210Friction energy
140924655801596578241563253353198[MJ]QBWDelay time
38.077.017.046.024.017.022.011.016.010.0[ms]t11EngagingRise time
12010045.030.025.019.0[ms]t12Braking torqueEngagement time
15819711714669.047.052.036.041.029.0[ms]t1Disengagement time
532451470378356435297308193109[ms]t2
V01-en_GB-02/20146.11 - 28
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with increased braking torque
ƒ Activation via bridge/half-wave rectifier
Design
Holding current reduction (cold brake)Size
25201816141210Friction energy
140924655801596578241563253353198[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
85.012317.069.060.021.041.017.027.024.0[ms]t11EngagingRise time
27019010014811337.055.037.043.044.0[ms]t12Braking torqueEngagement time
35531333421717357.097.054.070.068.0[ms]t1Disengagement time
532451470378356435297308193109[ms]t2
Design
Over-excitationSize
25201816141210Friction energy
352223221542966761706264[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
13517155.010386.046.070.031.054.029.0[ms]t11EngagingRise time
43026631922216083.093.068.087.053.0[ms]t12Braking torqueEngagement time
56543737432524612916399.014182.0[ms]t1Disengagement time
20418416716015116814111781.053.0[ms]t2
ƒ The brake response and application times are guide values. Theengagement time is 10 times longer with AC-side switching.With themaximumair gap thedisengagement time t2–depend-ing on the brake and control – is up to 4 times longer than thedisengagement time with the rated air gap.
6.11 - 29V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Manual release lever
SizeMotor frame size
Brake
d12h5Δ kk5[mm][mm][mm][mm]
13.01072917306063-32063-42
13.013.0
107116
2927
186187
0608
071-32071-42
13.013.0
107116
2927
207218
0608
080-32080-42
13.013.0
116132
2728
245256
0810
090-32
13.013.0
132161
2837
294296
1012
100-12100-32
13.024.0
161195
3741
292296
1214
112-22
24.024.0
195240
4155
373373
1416
132-12132-22132-32
The following combinations with manual release lever and motorconnection in the same position are not possible:• HAN connector with connection in position 1• Inverter motec• Terminal box of motor sizes 071, 080, 090 for brake and retracting(M☐☐MA BR/BS/BA/BI)
V01-en_GB-02/20146.11 - 30
MF three-phase AC motorsAccessories
6.11
Resolver
Stator-fed resolver with two stator windings offset by 90° and onerotor winding with transformer winding.
ƒ The three-phase AC motors with resolver cannot be used forspeed-dependent safety functions in connectionwith the SM301safety module.
Product key
RS1Accuracy
-10 ... 10[']Absolute positioning
1 revolutionMax. input voltage
10.0[V]Uin,maxDCMax. input frequency
4.00[kHz]fin,maxRatio
0.30± 5 %Stator / rotorRotor impedance
51 + j90[Ω]ZroStator impedance
102 + j150[Ω]ZsoImpedance
44 + j76[Ω]ZrsMin. insulation resistance
10.0[MΩ]RAt DC 500 VNumber of pole pairs
1
6.11 - 31V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Incremental encoder andSinCosabsolute valueencoder
ƒ The three-phase ACmotorswith incremental encoders or SinCosabsolute value encoders cannot be used for speed-dependentsafety functions in connection with the SM 301 safety module.
Encoder type
SinCosabsolutevalue
TTL incrementalHTL incremental
Product key
AM1024-8V-H
IG2048-5V-T
IG1024-5V-T
IG512-5V-T
IG2048-24V-H
IG1024-24V-H
IG512-24V-H
IG128-24V-H
Encoder type
Multi-turn
Pulses
10242048102451220481024512128Output signals
1 VssTTLHTLInterfaces
HiperfaceA, B, N track and invertedA, B trackAbsolute revolutions
40960Accuracy
-0.8 ... 0.8-2 ... 2-22.5 ...22.5
[']
Min. input voltage
7.004.758.00[V]Uin,minDCMax. input voltage
12.05.2530.026.0[V]Uin,maxDCMax. current consumption
0.0800.150.040[A]ImaxLimit frequency
20030016030.0[kHz]fmaxInverter assignment
E84AVTCE84AVHCE84AVSCE94AE84AVHCECS
EVS93
Servo-InvertersInverters• Servo Drives 9400 (E94A)• Inverter Drives 8400 StateLine (E84AVSC)
• Inverter Drives 8400 HighLine (E84AVHC) • 9300 servo inverters (EVS93)• Servo Drives ECS• Inverter Drives 8400 TopLine (E84AVTC)
V01-en_GB-02/20146.11 - 32
MF three-phase AC motorsAccessories
6.11
Blowers
ƒ The use of a blower enables operation below 20 Hz withouttorque derating.
Rated data for 50 Hz
Connectionmethod
Number ofphases
Size
Motor
mImaxPmaxUmaxUmin
[kg][A][kW][V][V]
2.00
0.110.0272772301
063 0.120.028
303200Δ3
0.070525346Y
2.10
0.100.0272772301
071 0.110.031
303200Δ3
0.060525346Y
2.300.11
0.0292772301
0800.031
303200Δ3
0.060525346Y
2.70
0.290.0652772201
090 0.380.091
303200Δ3
0.22525346Y
3.00
0.280.0662772201
100 0.370.091
303200Δ3
0.22525346Y
3.10
0.280.0712772201
112 0.350.097
303200Δ3
0.20525346Y
4.20
0.400.0982772301
132 0.580.12
303200Δ3
0.33525346Y
6.20
0.97
0.25
2772301
160 0.87303200Δ3
0.50525346Y
8.00
0.972772301
180 0.87303200Δ3
0.50525346Y
6.11 - 33V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Blowers
Rated data for 50 Hz
Connectionmethod
Number ofphases
Size
Motor
mImaxPmaxUmaxUmin
[kg][A][kW][V][V]
8.00
0.97
0.25
2772301
200 0.87303200Δ
30.50525346Y
15.01.100.28400200Δ
2250.350.17525346Y
Rated data for 60 Hz
Connectionmethod
Number ofphases
Size
Motor
mImaxPmaxUmaxUmin
[kg][A][kW][V][V]
2.00
0.120.0322772301
063 0.100.028
332220Δ3
0.060575380Y
2.10
0.120.0332772301
071 0.100.029
332220Δ3
0.060575380Y
2.30
0.140.0372772301
080 0.100.034
332220Δ3
0.060575380Y
2.70
0.250.065277220
1
090 0.330.077
332Δ3
0.19575380Y
3.00
0.300.075277220
1
100 0.310.087
332Δ3
0.18575380Y
3.10
0.370.094277220
1
112 0.310.10
332Δ3
0.18575380Y
4.20
0.57
0.15
2772301
132 0.44332220Δ
3
0.25575380Y
6.200.93
0.36
332220Δ160
0.56575380Y
8.00
0.93332220Δ180
0.56575380Y
0.93332220Δ200
0.56575380Y
15.00.760.28400220Δ
2250.430.26575380Y
V01-en_GB-02/20146.11 - 34
MF three-phase AC motorsAccessories
6.11
Temperature monitoring
ƒ The thermal sensors are integrated in the windings. The use ofan additional motor protection switch is recommended.
TKO thermal contacts
Max. input voltageMax. input currentMax. reset temperat-ure
Min. reset temperat-ure
Operating temperat-ure
Function
AC
Uin,maxIin,maxTmaxTminT
-5 ... 5
[V][A][°C][°C][°C]
2502.5013590.0150NC contact
PTC thermistor
StandardRated resistanceOperating temperat-ure
Function
140 °C-20 °C155 °C
RNRNRNT
-5 ... 5
[Ω][Ω][Ω][°C]
DIN 44080DIN VDE 0660 Part
30325030.0550150
Sudden change in res-istance
6.11 - 35V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Temperature monitoring
KTY temperature sensor
Max. input currentRated resistanceFunction
170 °C25 °C170 °C150 °C25 °C
Iin,maxIin,maxRNRNRN[A][A][Ω][Ω][Ω]
0.0020.010247122251000Continuous resistance changeKTY83-110
0.0020.01014821334603Continuous resistance changeKTY84-130
Variation of resistance
ƒ If the detector is supplied with a measured current of 1 mA, theabove relationship between the temperature and the resistanceapplies.
V01-en_GB-02/20146.11 - 36
MF three-phase AC motorsAccessories
6.11
Terminal box
In the standard version, the motors are connected in the terminalbox. As an option, the motors are also available with the connectors
The MF three-phase AC motors are designed specifically for inverteroperation. With a base frequency of 120Hz, the rated voltage has
described on the following pages as long as the permissible ratingsare not exceeded.
been specified at approximately 200 V in delta connection (up to 2.2kW) and approximately 350V in star configurations.
Motor terminal box - built-onaccessories assignment: 4-pole / 6-polemotors
Motor type
M☐☐MAZEM☐☐MARSM☐☐MAXXM☐☐MAIGM☐☐MAAG
Motor framesize
Terminal box
KK2KK1063-32063-42
KK2KK2KK1071-32071-42
KK2KK2KK1080-32080-42
KK2KK2KK1090-32
KK2KK2KK1100-12100-32
KK2KK2KK1112-22
KK3KK3KK1132-12132-22132-32
Motor type
M☐☐MABZM☐☐MABSM☐☐MABRM☐☐MABIM☐☐MABA
Motor framesize
Terminal box
KK3KK2063-32063-42
KK2KK3KK2071-32071-42
KK2KK3KK2080-32080-42
KK2KK3KK2090-32
KK2KK3KK2100-12100-32
KK2KK3KK2112-22
KK3KK3KK3132-12132-22132-32
6.11 - 37V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Terminal box
Dimensions of KK1
ƒ Formotors withmotor terminal box KK1, the connector positioncan be selected in accordance with the terminal box position.
ƒ If preferred positions are not specified in the order, the cableentry will be positioned as circled on the diagram below.
Size
Motor
P2P1n2m1g1x
[mm][mm][mm][mm][mm][mm]
M20x1.5M20x1.5
M16x1.5M20x1.5 1)
75.093.0 1)
75.093.0 1)
100117 1)
2112 1)
063
109126 1)
2415 1)
071
M25x1.5M20x1.5115115
15014080
15719090
16620100
17622112
M32x1.5M32x1.512212219533132
UL/CSA approval: cURus1)
V01-en_GB-02/20146.11 - 38
MF three-phase AC motorsAccessories
6.11
Terminal box
Cable entry position when using KK1
Terminal box in position 3Terminal box in position 2
Terminal box in position 5Terminal box in position 4
6.11 - 39V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Terminal box
Dimensions of KK2
Size
Motor
P2P1n2m1g1x
[mm][mm][mm][mm][mm][mm]
M20x1.5M16x1.510313610713063
11815071
M25x1.5M20x1.5121152
13217080
13722090
14723100
15825112
V01-en_GB-02/20146.11 - 40
MF three-phase AC motorsAccessories
6.11
Terminal box
Dimensions of KK3
Size
Motor
P5P4P3P2P1n2m1g1x
[mm][mm][mm][mm][mm][mm][mm][mm][mm]
M20x1.5
M20x1.5
M32x1.5M25x1.5125195
1242063
1335071
14215080
14720090
15821100
16823112
18738132
M16x1.5M16x1.5M50x1.512722621035160
23073180
M16x1.5M50x1.5 1)M63x1.5 1)20535434695225
Cable entry only possible at one position.1)
Terminal box position 2: cable entry at position 5.Terminal box position 3: cable entry at position 2.Terminal box position 4: cable entry at position 3.Terminal box position 5: cable entry at position 4.
6.11 - 41V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Plug connectors
ICN, HAN andM12 connectors (only for IG128-24V-H incrementalencoder) are available for the three-phase AC motors.
ICN connector
A connector is used for power, brake and temperature monitoring.The connections to the feedback systemand the blower each employa separate connector.
Connection for power, brake and temperature monitoring
The connectors can be rotated through 270° and are fitted with abayonet catch for SpeedTec connectors. As this connector is alsocompatiblewith conventional unionnuts, existingmating connectorscan continue to be used without difficulty. The motor connection isdetermined in the terminal boxandmust be checkedbefore commis-sioning.
ƒ ICN 6-pole
Pin assignment
MeaningDesignationContact
Brake +/ACBD1 / BA11
Brake /ACBD2 / BA22
PE conductorPEPE
Phase U powerU4
Phase V powerV5
Phase W powerW6
ƒ ICN 8-pole
Pin assignment
MeaningDesignationContact
Phase U powerU1
PE conductorPEPE
Phase V powerV3
Phase W powerW4
Thermal sensor: TKO/PTC/ +KTYTB1 / TP1 / R1A
Thermal sensor: TKO/PTC/-KTYTB2 / TP2 / R2B
Brake +/ACBD1 / BA1C
Brake /ACBD2 / BA2D
V01-en_GB-02/20146.11 - 42
MF three-phase AC motorsAccessories
6.11
ICN connector
Feedback connection
All encoder systems (apart from IG128-24V-H) are also availablewithan ICN connector fixed to the motor terminal box for exceptionallyfast commissioning. The connectors are fitted with a bayonet fixing,which is also compatible with conventional union nuts. Existingmating connectors can therefore continue to be used without diffi-culty.
ƒ Resolver
Pin assignment
MeaningDesignationContact
Transformer windings+Ref1
-Ref2
Supply: Electronic nameplate+VCC ETS3
Cosine stator windings+COS4
-COS5
Sine stator windings+SIN6
-SIN7
Not assigned
8
9
10
KTY temperature sensor+KTY11
-KTY12
ƒ Hiperface incremental encoderandSinCosabsolutevalueencoder
Pin assignment
MeaningDesignationContact
Track B/+SINB1
Track A inverse/-COSA¯2
Track A/+COSA3
Supply ++UB4
MassGND5
Zero track inverse/-RS485Z¯6
Zero track/+RS485Z7
Not assigned8
Track B inverse/-SINB¯9
Not assigned10
KTY temperature sensor+KTY11
-KTY12
6.11 - 43V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Motor terminal boxwith ICN connectors - built-onaccessories assign-ment: 4-pole / 6-pole motors
Motor type
M☐☐MAZEM☐☐MARSM☐☐MAXXM☐☐MAIGM☐☐MAAG
Motor framesize
Terminal box
KK2KK1063-32063-42
KK2KK2KK1071-32071-42
KK2KK2KK1080-32080-42
KK2KK2KK1090-32
KK2KK2KK1100-12100-32
Motor type
M☐☐MABZM☐☐MABSM☐☐MABRM☐☐MABIM☐☐MABA
Motor framesize
Terminal box
KK3KK2063-32063-42
KK2KK3KK2071-32071-42
KK2KK3KK2080-32080-42
KK2KK3KK2090-32
KK2KK3KK2100-12100-32
V01-en_GB-02/20146.11 - 44
MF three-phase AC motorsAccessories
6.11
ICN connector
Dimensions of KK1
ƒ Formotorswith connectors, the connector position can be selec-ted in accordance with the terminal box position.
ƒ If preferred positions are not specified in the order, the connectorwill be positioned as circled on the diagram below.
Size
Motor
n2m1g1x
[mm][mm][mm][mm]
93.093.011712063
12615071
115115
15014080
15719090
16620100
17622112
12212219533132
6.11 - 45V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Connector position when using KK1
Terminal box in position 3Terminal box in position 2
Terminal box in position 5Terminal box in position 4
V01-en_GB-02/20146.11 - 46
MF three-phase AC motorsAccessories
6.11
ICN connector
Dimensions of KK2/KK3
ƒ Formotorswith connectors, the connector position can be selec-ted in accordance with the terminal box position.
ƒ If preferred positions are not specified in the order, the connectorwill be positioned as circled on the diagram below.
Size
Motor
z1, maxx8x7n2m1g1x
[mm][mm][mm][mm][mm][mm][mm]
431091610313610713063
11815071
4112523121152
13217080
13722090
14723100
15825112
711662712519518738132
6.11 - 47V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Connector position when using KK2/KK3
Terminal box in position 3Terminal box in position 2
Terminal box in position 5Terminal box in position 4
V01-en_GB-02/20146.11 - 48
MF three-phase AC motorsAccessories
6.11
ICN connector
Blower connection
The blower is also optionally available with an ICN connector fixedto the terminal box of the blower for exceptionally fast commission-ing. The connectors are fitted with a bayonet fixing, which is alsocompatiblewith conventional union nuts. Existing counter plugs cantherefore continue to be used without difficulty.
ƒ Blower 1-ph
Pin assignment
MeaningDesignationContact
PE conductorPEPE
FanU11
U22
Not assigned
3
4
5
6
ƒ Blower 3-ph
Pin assignment
MeaningDesignationContact
PE conductorPEPE
Phase U powerU1
Not assigned2
Phase V powerV3
Not assigned4
5
Phase W powerW6
6.11 - 49V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Dimensions of blower
Size
Motor
n3m2g3k4[mm][mm][mm][mm]
10595115
12063
122071
1069613213080
10595
141
22
090
150100
162112
18232132
1069620931
160
180
225
ƒ In addition, the cover of the blower terminal box (including con-nectors) can be rotated progressively through 90° if necessary.
V01-en_GB-02/20146.11 - 50
MF three-phase AC motorsAccessories
6.11
M12 connector
IG128-24V-H incremental encoder connection
Asa standard this incremental encoder is equippedwith a connectioncable of about 0.5 m length and with a common industry standardM12 connector at its end.
Pin assignment
MeaningDesignationContact
Supply ++UB1
Track BB2
MassGND3
Track AA4
6.11 - 51V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
HAN connector
10E
In the case of the rectangular HAN-10E connectors, all six ends of thethreewindingphases are takenout to thepower contacts. Themotorcircuit is therefore determined in the mating connector.
Pin assignment
MeaningContact
Terminal board: U11
Terminal board: V12
Terminal board: W13
Brake +/AC4
Brake -/AC5
Terminal board: W26
Terminal board: U27
Terminal board: V28
Thermal sensor: +KTY/PTC/TKO9
Thermal sensor: KTY/PTC/TKO10
V01-en_GB-02/20146.11 - 52
MF three-phase AC motorsAccessories
6.11
HAN connector
Modular
The connector is available with two different power modules (16 Aor 40A), dependingon the ratedmotor current. Themotor connectionis determined in the terminal box and must be checked before com-missioning.
ƒ HANmodular 16 A
Pin assignment
MeaningContactModule
DummymoduleB
Thermal sensor: +KTY/PTC/TKO1
C
Brake +/AC2
Brake -/AC3
Rectifier: Switching contact4
5
Thermal sensor: KTY/PTC/TKO6
ƒ HANmodular 40 A
Pin assignment
MeaningContactModule
Terminal board: U11
A Terminal board: V12
Terminal board: W13
DummymoduleB
Thermal sensor: +KTY/PTC/TKO1
C
Brake +/AC2
Brake -/AC3
Rectifier: Switching contact4
5
Thermal sensor: KTY/PTC/TKO6
6.11 - 53V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
HAN connector
Motor type
M☐☐MAZEM☐☐MAXXM☐☐MABZM☐☐MABR
Motor framesize
Terminal box with HAN connector
HAN-10EHANmodular
063-32063-42
HAN-10EHANmodular
HAN-10EHANmodular
071-32071-42
HAN-10EHANmodular
HAN-10EHANmodular
080-32080-42
HAN-10EHANmodular
HAN-10EHANmodular
090-32
HAN-10EHANmodular
HAN-10EHANmodular
100-12100-32
112-22
HANmodularHANmodular132-12132-22132-32
Motor terminal box with HAN connectors - built-on accessories as-signment: 4-pole / 6-pole motors
V01-en_GB-02/20146.11 - 54
MF three-phase AC motorsAccessories
6.11
HAN connector
Dimensions
ƒ Formotorswith connectors, the connector position can be selec-ted in accordance with the terminal box position.
ƒ Unless the connector position is specified, it will be supplied inposition 1.
Size
Motor
x4x3g4[mm][mm][mm]
6.005.00120063
8.007.00129071
19.011.0138080
23.015.0143090
24.016.0154100
21.513.5164112
4.5034.5233132
9.0039.0248160
6.11 - 55V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
HAN connector
Position of connector
Connector in position 3Connector in position 2
Connector in position 5Connector in position 4
V01-en_GB-02/20146.11 - 56
MF three-phase AC motorsAccessories
6.11
2nd shaft end
Dimensions, self-ventilated (4/6-pole)
Motor type
M☐☐MAZEBuilt-on ac-cessories M☐☐MABZ
Motor framesize
t2u2l8l7l4d7d5d4d4c4k3Δ k
j6h6
[mm][mm][mm][mm][mm][mm][mm][mm][mm][mm][mm][mm]
3.005.003.0019.034.0M514.01.1011.047071-32071-42
3.005.004.5019.034.0M514.01.109.0068080-32080-42
3.005.005.0019.034.0M514.01.109.0057090-32
3.506.0010.532.517.034.0M620.01.3018.571100-12100-32
3.506.007.0028.517.034.0M620.01.3016.084112-22
4.008.008.5042.024.546.0M1030.01.6024.5101132-12132-22132-32
During operation, appropriate measures must be taken to make fan coveropening safe.
1)
6.11 - 57V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Protection cover
Dimensions, self-ventilated (4/6-pole)
Motor type
M☐☐MARSM☐☐MAIG
M☐☐MABSM☐☐MABIM☐☐MABRM☐☐MAXX
M☐☐MAAGM☐☐MABA
Motor framesize
g6k3Δ kΔ kΔ kΔ k
[mm][mm][mm][mm][mm][mm]
12311.0821296626063-32063-42
13812.0781227826071-32071-42
15616.01271379926080-32080-42
17615.01131319426090-32
19417.011213210731100-12100-32
21818.011115112131112-22
25720.013415614131132-12132-22132-32
V01-en_GB-02/20146.11 - 58
MF three-phase AC motorsAccessories
6.11
Protection cover
Dimensions, forced ventilated (4/6-pole)
Motor type
M☐☐MARSM☐☐MAIG
M☐☐MABRM☐☐MABSM☐☐MAXX
M☐☐MAAGM☐☐MABI
Motor framesize
g6Δ kΔ kΔ k
[mm][mm][mm][mm]
133169209169063-32063-42
150165202165071-32071-42
170168224168080-32080-42
188157210157090-32
210137198137100-12100-32
249216216135112-22
300226226140132-12132-22132-32
6.11 - 59V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
V01-en_GB-02/20146.11 - 60
MF three-phase AC motorsAccessories
6.11
15593809
Lenze SEHans-Lenze-Straße 1D-31855 AerzenPhone: +49 (0)5154 82-0Telefax: +49 (0)5154 82 28 00
www.Lenze.com