Automation systems for garage doors · 90 AUTOMATION SYSTEMS FOR GARAGE DOORS TIZIANO TIZIANO B GDA...

phase out

Complete Systems P. 248

accessoriesP. 238

control units P. 230accessories for control units P. 238set of batteries for control units P. 238expansion boards P. 239software P. 240receivers P. 240transmitters P. 241control devices P. 241

activation sensors automatic doors and security P. 242signalling devices P. 243safety devices - Photocells and accessories P. 243safety devices - Sensitive edges P. 245rubber profiles P. 245solenoid locks P. 246release systems P. 246

Automation systems for garage doors

Guide to choosing

24V Semi-intensive

- PHEBE N Control unit incorporated with torque self-learning system

- PHEBE N IP44 Control unit incorporated with torque self-learning system

- PHEBE N SQ Limit switch on-board the motor- PHEBE N C Limit switch on-board the motor

- PHEBE BT A U Built-in control unit with D-Track- PHEBE BT A U C Built-in control unit with D-Track- PHEBE BT A SQ Limit switch on-board the motor- PHEBE BT A C SQ Limit switch on-board the motor- PHEBE BT A U IP44 IP44- PHEBE BT A SQ IP44 IP44l PHEBE BT A U KIT ITA Built-in control unit with D-Track

9m² 230V very intensive

- BERMA limit switch- BERMA SEB limit switch- BERMA R release and hydraulic slowdown- BERMA SEB R release and hydraulic slowdown- BERMA SA R release and hydraulic slowdown

intensive- BOTTICELLI D-Trackl KIT BOTTICELLI D-Track

Semi-intensive - TIZIANO B GDA 260 S01 D-Track

13m² intensive - BOTTICELLI B CRC 480 D01 D-Track16m²

very intensive

- EOS 120 D-Track20m² - ARGO Courtesy Light35m² - ARGO G Courtesy Light

A Operator

B Control unit

C Backup Batteries

D Receiver

E Photocell

G Sensitive edge

H Post

I Flashing Beacon

LControl system (key selector switch, keypad, badge reader)

N Junction box

P Fitting system 2x1.5 3x1.5 5x1.5 RG 58 3x1 5x1 2x1 9x0.5 4x2.5

international catalogue -without prices- 2017_2018 ENG (D832873 00203).indd 89 26/06/2017 14:31:47

SYSTEMS FO

RAGE D

TIZIANO

er ready

d-track

Just 13 cm thick, the TIZIANO is one of the most compact operators on the market and can be installed in any architectural context.With the radio receiver incorporated in the control unit, the TIZIANO can store the codes of as many as 10 MITTO or KLEIO series remote controls and/or wireless control systems such as RB or T-BOX.

62,5320

352855 - 3455

3175 - 3775

DIMENSIONS (mm)

TECHNICAL FEATURES

TIZIANO

Control unit VENERE B GDA

Motor power supply 24 V

Type of limit switch encoder

Slowdown yes

Impact reaction D-Track

Locking mechanical

Release cord or steel cable

Environmental conditions from -20 °C to 60 °C

Protection rating IPX0

phase out

accessoriesP. 238

Code Name Description

P915199 00002 TIZIANO B GDA 260 S01 Operator for sectional garage doors with tractive force 60 kg and semi-intensive use. Door

surface area 10 m². Opening speed 6.6 m/min. d-track

VENERE M B GDA : Control panel for one 24V operator for garage doors

• Application: control unit for 1 24V garage door operator• Board power supply: 230V single-phase• Operator power supply: 24V 100W• Main features: dip-switch programming and potentiometers, incorporated dual channel receiver, D-Track anti-crushing system,

slowdown during opening and closing• Main functions: automatic re-closing, automatic torque control

RECOMMENDED ACCESSORIES

P115015 00001 - BIN B Gda 3020 Cat

P115015 00002 - BIN B Gda 3620 Cat

Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

P115015 00003 - BIN B Gda 2x1510 Cat

P115015 00004 - BIN B Gda 2x1810 Cat

Chain track divided into two halves for TIZIANO B GDA, length 2x1510 mm, useful travel 2560 mm

P115026 00001 - BIN B GDA 3020 BELT

P115026 00002 - BIN B GDA 3620 BELT

Monoblock belt rail, length 3020 mm, useful length 2560 mm Monoblock belt rail, length 3620 mm, useful length 3160 mm

P115026 00003 - BIN B GDA 2x1510 BELT

P115026 00004 - BIN B GDA 2x1810 BELT

Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm

N999620 - SAS1 KIT B GDA 260 B01

N999621 - SAS2 KIT B GDA 260 B01

Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm

P115005 - SM1

N733069 - SET/S

External manual release for overhead garage door (1 operator) External release for insulated sectional and overhead doors of thickness up to 50 mm. SET/S

SYSTEMS FO

RAGE D

TIZIANO

er ready

d-track

Just 13 cm thick, the TIZIANO is one of the most compact operators on the market and can be installed in any architectural context.With the radio receiver incorporated in the control unit, the TIZIANO can store the codes of as many as 10 MITTO or KLEIO series remote controls and/or wireless control systems such as RB or T-BOX.

62,5320

352855 - 3455

3175 - 3775

DIMENSIONS (mm)

TECHNICAL FEATURES

TIZIANO

Control unit VENERE B GDA

Motor power supply 24 V

Type of limit switch encoder

Slowdown yes

Impact reaction D-Track

Locking mechanical

Release cord or steel cable

Environmental conditions from -20 °C to 60 °C

Protection rating IPX0

phase out

accessoriesP. 238

P915199 00002 TIZIANO B GDA 260 S01 Operator for sectional garage doors with tractive force 60 kg and semi-intensive use. Door

surface area 10 m². Opening speed 6.6 m/min. d-track

VENERE M B GDA : Control panel for one 24V operator for garage doors

• Application: control unit for 1 24V garage door operator• Board power supply: 230V single-phase• Operator power supply: 24V 100W• Main features: dip-switch programming and potentiometers, incorporated dual channel receiver, D-Track anti-crushing system,

slowdown during opening and closing• Main functions: automatic re-closing, automatic torque control

P115015 00001 - BIN B Gda 3020 Cat

P115015 00002 - BIN B Gda 3620 Cat

P115015 00003 - BIN B Gda 2x1510 Cat

P115015 00004 - BIN B Gda 2x1810 Cat

P115026 00001 - BIN B GDA 3020 BELT

P115026 00002 - BIN B GDA 3620 BELT

Monoblock belt rail, length 3020 mm, useful length 2560 mm Monoblock belt rail, length 3620 mm, useful length 3160 mm

P115026 00003 - BIN B GDA 2x1510 BELT

P115026 00004 - BIN B GDA 2x1810 BELT

N999620 - SAS1 KIT B GDA 260 B01

N999621 - SAS2 KIT B GDA 260 B01

Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm

P115005 - SM1

N733069 - SET/S

SYSTEMS FO

RAGE D

BOTTICELLI / EOS120

d-track

er ready

ee link

Electromechanical operators for intensive/very intensive use, designed for the automation of sectional garage doors.Suitable for installation in any context, thanks to the wide choice of chain rails available in the various lengths.The control unit and limit switch with encoder with mechanical stop are incorporated in the operator and rail respectively.

250max

3380 / 2780 378

3760/ 3160

DIMENSIONS (mm)

TECHNICAL FEATURES

BOTTICELLI BOTTICELLI B CRC 480 D01 EOS 120

Control unit VENERE VENERE D VENERE D

Motor power supply 24 V 24 V 24 V

Type of limit switch encoder + mechanical stop for opening encoder + mechanical stop for opening encoder + mechanical stop for opening

Slowdown yes yes yes

Impact reaction D-Track D-Track D-Track

Locking mechanical mechanical mechanical

Release cord or steel cable cord or steel cable cord or steel cable

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

Protection rating IPX0 IPX0 IPX0

phase out

accessoriesP. 238

P915194 00002 BOTTICELLI Operator for sectional garage doors with tractive force 60 kg and intensive use. Door

surface area 10 m². Opening speed 5 m/min d-track

P915201 00002

BOTTICELLI B CRC 480 D01

Operator for sectional garage doors with tractive force 80 kg and intensive use. Max door surface area 13 m². Opening speed 5 m/min. d-track

P915195 00002 EOS 120 Operator for sectional garage doors with tractive force 120 kg and very intensive use. Door

surface area 16 m². Opening speed 4.5 m/min d-track

R915147 00002 KIT BOTTICELLI

Operator for sectional garage doors with tractive force 60 kg and intensive use. Door surface area 10 m². Opening speed 5 m/min. Chain rail in 3 pieces, length 2900 mm, useful travel 2400 mm d-track

VENERE D : Control panel for one 24V operator for garage doors

• Application: control unit for 1 24V garage door operator• Board power supply: 230V single-phase• Operator power supply: 24V 100W• Main features: programming with display, incorporated dual channel receiver, D-Track anti-crushing system, slowdown during

opening and closing• Main functions: automatic re-closing, automatic torque control

P115020 00001 - BIN Catena 2900 Sint

P115020 00002 - BIN Catena 3500 Sint

Chain rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm

P115021 00002 - BIN Catena 2X1750 Sint

P115022 00001 - BIN Cinghia 2900 Pig FE

Chain rail divided into two halves for BOTTICELLI, length 2x1750, travel 3000 mm

Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm

P115023 00001 - BIN BELT 2X1450 Pig FE50

Guide rail with belt, divided into two halves for Botticelli, length 2x1450, travel 2400 mm

P115023 00002 - BIN CINGHIA 2X1750 Pig FE

P115010 00001 - BIN120 CATENA 2900

Belt rail divided into two halves for BOTTICELLI, length 3500, travel 3000 millimetres

Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm

P115010 00002 - BIN CATENA 3500

P115010 00003 - BIN120 CATENA 2X 1450

Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm Chain rail 2 parts

P115010 00004 - BIN120 CATENA 2X 1750

N733391 - PBE

Chain rail 2 parts Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.

N999060 - APT

N999370 - TA BIN

Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling

Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs)

P115005 - SM1

N733069 - SET/S

P115003 - ST

P115029 - BRTS

Automatic bolt release for sectional doors Triangular arm with slide for overhead doors. For Botticelli B CRC 480 and Eos 120 operators.

P125006 - CB EOS -

Set of backup batteries for VENERE D

SYSTEMS FO

RAGE D

BOTTICELLI / EOS120

d-track

er ready

ee link

Electromechanical operators for intensive/very intensive use, designed for the automation of sectional garage doors.Suitable for installation in any context, thanks to the wide choice of chain rails available in the various lengths.The control unit and limit switch with encoder with mechanical stop are incorporated in the operator and rail respectively.

250max

3380 / 2780 378

3760/ 3160

DIMENSIONS (mm)

TECHNICAL FEATURES

BOTTICELLI BOTTICELLI B CRC 480 D01 EOS 120

Control unit VENERE VENERE D VENERE D

Motor power supply 24 V 24 V 24 V

Type of limit switch encoder + mechanical stop for opening encoder + mechanical stop for opening encoder + mechanical stop for opening

Slowdown yes yes yes

Impact reaction D-Track D-Track D-Track

Locking mechanical mechanical mechanical

Release cord or steel cable cord or steel cable cord or steel cable

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

Protection rating IPX0 IPX0 IPX0

phase out

accessoriesP. 238

P915194 00002 BOTTICELLI Operator for sectional garage doors with tractive force 60 kg and intensive use. Door

surface area 10 m². Opening speed 5 m/min d-track

P915201 00002

BOTTICELLI B CRC 480 D01

Operator for sectional garage doors with tractive force 80 kg and intensive use. Max door surface area 13 m². Opening speed 5 m/min. d-track

P915195 00002 EOS 120 Operator for sectional garage doors with tractive force 120 kg and very intensive use. Door

surface area 16 m². Opening speed 4.5 m/min d-track

R915147 00002 KIT BOTTICELLI

Operator for sectional garage doors with tractive force 60 kg and intensive use. Door surface area 10 m². Opening speed 5 m/min. Chain rail in 3 pieces, length 2900 mm, useful travel 2400 mm d-track

VENERE D : Control panel for one 24V operator for garage doors

• Application: control unit for 1 24V garage door operator• Board power supply: 230V single-phase• Operator power supply: 24V 100W• Main features: programming with display, incorporated dual channel receiver, D-Track anti-crushing system, slowdown during

P115020 00001 - BIN Catena 2900 Sint

P115020 00002 - BIN Catena 3500 Sint

P115021 00002 - BIN Catena 2X1750 Sint

Chain rail divided into two halves for BOTTICELLI, length 2x1750, travel 3000 mm

P115023 00001 - BIN BELT 2X1450 Pig FE50

Guide rail with belt, divided into two halves for Botticelli, length 2x1450, travel 2400 mm

P115023 00002 - BIN CINGHIA 2X1750 Pig FE

P115010 00001 - BIN120 CATENA 2900

Belt rail divided into two halves for BOTTICELLI, length 3500, travel 3000 millimetres

Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm

P115010 00002 - BIN CATENA 3500

P115010 00003 - BIN120 CATENA 2X 1450

Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm Chain rail 2 parts

P115010 00004 - BIN120 CATENA 2X 1750

N733391 - PBE

Chain rail 2 parts Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.

N999060 - APT

N999370 - TA BIN

Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling

Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs)

P115005 - SM1

N733069 - SET/S

P115003 - ST

P115029 - BRTS

Automatic bolt release for sectional doors Triangular arm with slide for overhead doors. For Botticelli B CRC 480 and Eos 120 operators.

P125006 - CB EOS -

Set of backup batteries for VENERE D

SYSTEMS FO

RAGE D

PHEBE BT A

Electromechanical operators for residential use for the automation of overhead garage doors.The built-in control unit manages the second operator for installation on large-size doors or doors with integrated pedestrian doors.The microprocessor technology also manages the torque of the motors with maximum precision and in total safety.U-Link platform: thanks to the Vega control unit, the Phebe BT A operator is compatible with the U-Link communication protocol, the exclusive Bft connectivity platform.Easy installation and assembly: the new Vega control unit has terminal blocks according to the new BFT standard, which simplifies the identification of outputs/inputs thanks to standardised colours and numbering, and also facilitates wiring thanks to the removable terminal blocks. Opening the casing and adjusting the limit switches is now easier thanks to the front screws.D-Track torque control: the smart torque management system that constantly updates the gate thrust level, ensuring safe operation regardless of the weather, temperature or system wear.Ease of use: it is now always possible to control an opening from inside the garage, even without remote control, thanks to the integrated start button.

330 249

114 160113

DIMENSIONS (mm)

TECHNICAL FEATURES

PHEBE BT A U PHEBE BT A SQ PHEBE BT A U C PHEBE BT A C SQ PHEBE BT A U IP44 PHEBE BT A SQ IP44

Motor power supply 24 V 24 V 24 V 24 V 24 V 24 V

Operator type overhead garage doors

overhead garage doors

Control unit VEGA VEGA VEGA VEGA VEGA VEGA

Door surface area 8 m² 8 m² 8 m² 8 m² 8 m² 8 m²

Frequency of use semi-intensive semi-intensive semi-intensive semi-intensive semi-intensive semi-intensive

Type of limit switch electromechanical electromechanical electromechanical electromechanical electromechanical electromechanical

Impact reaction D-Track D-Track D-Track D-Track D-Track D-Track

Protection rating IP20 IP20 IP20 IP20 IP44 IP44

Locking mechanical mechanical mechanical mechanical mechanical mechanical

Release knob knob knob knob knob knob

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

phase out

accessoriesP. 238

P915136 00002 PHEBE BT A U

Electromechanical operator with built-in control panel for overhead garage doors of maximum surface area 8 m² and semi-intensive use with slowdown. Cycle time 17-20 sec, ip20 U-Link

P915136 00003 PHEBE BT A SQ

Operator for overhead garage doors of maximum surface area 8 m² and semi-intensive use. Cycle time 17-20 sec, ip20 U-Link

P915139 00002 PHEBE BT A U C

P915139 00003 PHEBE BT A C SQ

P915137 00002 PHEBE BT A U IP44

P915137 00003 PHEBE BT A SQ IP44

R915150 00002

PHEBE BT A U KIT ITA

Kit for up&over garage doors of maximum surface area 8 m². Operator with incorporated panel, slowdown and duty semi-intensive. Manoeuvre time 17-20 sec, ip20 U-Link

VEGA QUADRO QSG : HYDRA N control board in CPEL panelD113836 00002 - VEGA QUADRO QSG - Recommended

• Application: control panel for one or two overhead garage door operators• Board power supply: 230V single-phase• Operators power supply: 24Vdc 168W max each operator• U-Link technology• Main characteristics: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing,

slowdown during opening and closing and electronic self-learning• Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold• Compatibility: HYDRA, HYDRA R• Version for external panel, not compatible with operators already equipped with card on board motor

D113836 00002 - VEGA QUADRO QSG

N733299 - CTBP

HYDRA N control board in CPEL panel Set of tubes to complete Phebe Kit - CTBP

D412377 - BCP

N733288 - BLP

Short welding base for PHEBE series operators (L 578 mm) Long welding base for PHEBE series operators (L 1600 mm)

N733120 - CTA

N733129 - CTA2

2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators Pack of 2 20x20 square drive tubes length 200 mm CTA2

N733112 - CBA

N733119 - CBAS

Straight telescopic arms for the installation of PHEBE series operators on overhead door

Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm

N733113 - CBASL

N733114 - CBAC

Curved telescopic arms for the installation of PHEBE series operators on overhead door

N733221 - CBAC-G

P115005 - SM1

Curved telescopic arms for the installation of PHEBE series operators on overhead door. Bushing welded on telescopic arm. External manual release for overhead garage door (1 operator)

P115001 - SM2

P125005 - BT BAT

External manual release for overhead garage door (2 operators)

Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO

P125007 - BT BAT1 -

Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor

SYSTEMS FO

RAGE D

PHEBE BT A

Electromechanical operators for residential use for the automation of overhead garage doors.The built-in control unit manages the second operator for installation on large-size doors or doors with integrated pedestrian doors.The microprocessor technology also manages the torque of the motors with maximum precision and in total safety.U-Link platform: thanks to the Vega control unit, the Phebe BT A operator is compatible with the U-Link communication protocol, the exclusive Bft connectivity platform.Easy installation and assembly: the new Vega control unit has terminal blocks according to the new BFT standard, which simplifies the identification of outputs/inputs thanks to standardised colours and numbering, and also facilitates wiring thanks to the removable terminal blocks. Opening the casing and adjusting the limit switches is now easier thanks to the front screws.D-Track torque control: the smart torque management system that constantly updates the gate thrust level, ensuring safe operation regardless of the weather, temperature or system wear.Ease of use: it is now always possible to control an opening from inside the garage, even without remote control, thanks to the integrated start button.

330 249

114 160113

DIMENSIONS (mm)

TECHNICAL FEATURES

PHEBE BT A U PHEBE BT A SQ PHEBE BT A U C PHEBE BT A C SQ PHEBE BT A U IP44 PHEBE BT A SQ IP44

Motor power supply 24 V 24 V 24 V 24 V 24 V 24 V

Operator type overhead garage doors

overhead garage doors

Control unit VEGA VEGA VEGA VEGA VEGA VEGA

Door surface area 8 m² 8 m² 8 m² 8 m² 8 m² 8 m²

Frequency of use semi-intensive semi-intensive semi-intensive semi-intensive semi-intensive semi-intensive

Type of limit switch electromechanical electromechanical electromechanical electromechanical electromechanical electromechanical

Impact reaction D-Track D-Track D-Track D-Track D-Track D-Track

Protection rating IP20 IP20 IP20 IP20 IP44 IP44

Locking mechanical mechanical mechanical mechanical mechanical mechanical

Release knob knob knob knob knob knob

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

phase out

accessoriesP. 238

P915136 00002 PHEBE BT A U

P915136 00003 PHEBE BT A SQ

P915139 00002 PHEBE BT A U C

P915139 00003 PHEBE BT A C SQ

P915137 00002 PHEBE BT A U IP44

P915137 00003 PHEBE BT A SQ IP44

R915150 00002

PHEBE BT A U KIT ITA

Kit for up&over garage doors of maximum surface area 8 m². Operator with incorporated panel, slowdown and duty semi-intensive. Manoeuvre time 17-20 sec, ip20 U-Link

VEGA QUADRO QSG : HYDRA N control board in CPEL panelD113836 00002 - VEGA QUADRO QSG - Recommended

• Application: control panel for one or two overhead garage door operators• Board power supply: 230V single-phase• Operators power supply: 24Vdc 168W max each operator• U-Link technology• Main characteristics: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing,

slowdown during opening and closing and electronic self-learning• Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold• Compatibility: HYDRA, HYDRA R• Version for external panel, not compatible with operators already equipped with card on board motor

D113836 00002 - VEGA QUADRO QSG

N733299 - CTBP

D412377 - BCP

N733288 - BLP

N733120 - CTA

N733129 - CTA2

N733112 - CBA

N733119 - CBAS

N733113 - CBASL

N733114 - CBAC

N733221 - CBAC-G

P115005 - SM1

P115001 - SM2

P125005 - BT BAT

P125007 - BT BAT1 -

SYSTEMS FO

RAGE D

ee link

er ready

Electromechanical operator for residential use for the automation of overhead garage doors.The built-in control unit manages the second operator for installation on large-size doors or doors with integrated pedestrian doors.The microprocessor technology also manages the torque of the motors with maximum precision and in total safety.

129 148

330 249

DIMENSIONS (mm)

TECHNICAL FEATURES

Control unit HYDRA N HYDRA N HYDRA N HYDRA N

Motor power supply 24 V 24 V 24 V 24 V

Type of limit switch electromechanical electromechanical electromechanical electromechanical

Impact reaction Electronic torque limiter Electronic torque limiter Electronic torque limiter Electronic torque limiter

Locking mechanical mechanical mechanical mechanical

Release knob knob knob knob

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

phase out

accessoriesP. 238

P915134 00102 PHEBE N

Electromechanical operator with built-in control panel for overhead garage doors of maximum surface area 7 m² and semi-intensive use with slowdown. Cycle time 17-20 sec, ip20

P915135 00102 PHEBE N SQ

Operator for overhead garage doors of maximum surface area 7 m² and semi-intensive use. Cycle time 17-20 sec, ip20

P915134 00104 PHEBE N C

Operator with incorporated panel for articulated leaf up&over garage doors of maximum surface area 7 m² and duty semi-intensive with slowdown. Manoeuvre time 17-20 sec, ip20

P915134 00106 PHEBE N IP44

HYDRA N : Control panel for one or two overhead garage door operators

• Application: control panel for one or two overhead garage door operators• Board power supply: 230V single-phase• Operators power supply: 24Vdc 168W max each operator• Main features: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing,

slowdown during opening and closing and electronic self-learning• Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold• Compatibility: HYDRA, HYDRA R• Version for application on board motor, not compatible with installation on external panel.

D113730 00002 - HYDRA N CPEL

N733299 - CTBP

D412377 - BCP

N733288 - BLP

N733120 - CTA

N733129 - CTA2

N733112 - CBA

N733119 - CBAS

N733113 - CBASL

N733114 - CBAC

N733221 - CBAC-G

P115005 - SM1

P115001 - SM2

P125005 - BT BAT

P125007 - BT BAT1 -

SYSTEMS FO

RAGE D

ee link

er ready

Electromechanical operator for residential use for the automation of overhead garage doors.The built-in control unit manages the second operator for installation on large-size doors or doors with integrated pedestrian doors.The microprocessor technology also manages the torque of the motors with maximum precision and in total safety.

129 148

330 249

DIMENSIONS (mm)

TECHNICAL FEATURES

Control unit HYDRA N HYDRA N HYDRA N HYDRA N

Motor power supply 24 V 24 V 24 V 24 V

Type of limit switch electromechanical electromechanical electromechanical electromechanical

Impact reaction Electronic torque limiter Electronic torque limiter Electronic torque limiter Electronic torque limiter

Locking mechanical mechanical mechanical mechanical

Release knob knob knob knob

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

phase out

accessoriesP. 238

P915134 00102 PHEBE N

P915135 00102 PHEBE N SQ

Operator for overhead garage doors of maximum surface area 7 m² and semi-intensive use. Cycle time 17-20 sec, ip20

P915134 00104 PHEBE N C

Operator with incorporated panel for articulated leaf up&over garage doors of maximum surface area 7 m² and duty semi-intensive with slowdown. Manoeuvre time 17-20 sec, ip20

P915134 00106 PHEBE N IP44

HYDRA N : Control panel for one or two overhead garage door operators

• Application: control panel for one or two overhead garage door operators• Board power supply: 230V single-phase• Operators power supply: 24Vdc 168W max each operator• Main features: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing,

slowdown during opening and closing and electronic self-learning• Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold• Compatibility: HYDRA, HYDRA R• Version for application on board motor, not compatible with installation on external panel.

D113730 00002 - HYDRA N CPEL

N733299 - CTBP

D412377 - BCP

N733288 - BLP

N733120 - CTA

N733129 - CTA2

N733112 - CBA

N733119 - CBAS

N733113 - CBASL

N733114 - CBAC

N733221 - CBAC-G

P115005 - SM1

P115001 - SM2

P125005 - BT BAT

P125007 - BT BAT1 -

SYSTEMS FO

RAGE D

d-track

ee link

er ready

24V electromechanical operator for sectional garage doors installable in residential, industrial and commercial environments.The sturdy mechanical structure and microprocessor technology of the control unit allow intensive use of the operator, while ensuring maximum reliability over time.Also, the D-Track torque control system and absolute encoder ensure extremely precise control of leaf movement and obstacle detection.

DIMENSIONS (mm)

TECHNICAL FEATURES

ARGO ARGO G

Control unit VENERE D ARGO VENERE D ARGO G

Motor power supply 24 V 24 V

Output revolutions 30 rpm 18 rpm

Type of limit switch absolute encoder absolute encoder

Slowdown yes yes

Impact reaction D-Track D-Track

Locking mechanical mechanical

Release cord or steel cable steel cable

Environmental conditions from -15 °C to 55 °C from -15 °C to 55 °C

Protection rating IP40 IP40

phase out

accessoriesP. 238

P925202 00001 ARGO Operator for sectional doors of surface area up to 20 m² and very intensive use.

d-track

P925206 00002 ARGO G Operator for sectional doors of surface area up to 35 m² and very intensive use.

d-track

VENERE D ARGO : Control panel for one 24V operator for garage doors

• Application: control unit for 1 24V garage door operator• Board power supply: 230V single-phase• Operator power supply: 24V• Main features: programming with display, incorporated dual channel receiver, D-Track anti-crushing system, slowdown during

N733148 - COR 30

N733149 - COR 40

Z30 gear kit complete with accessories for industrial sectional doors, for 1” (25.4 mm) shafts

N733338 - PIG 12/ULISSE S

Z12 pinion gear for industrial sectional doors, for 1” (25.4 mm) shafts

N733421 - RCA

N733422 - RCAL

Lever release for ARGO with steel cable, length 3.5 m Lever release for ARGO with steel cable, length 7 m

N574039 - BOX

P125005 - BT BAT

Wall-mounted safe for steel cable release and electric control Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO

N999592 - CKK -

Pack of mounting tabs for ARGO and ARGO G

SYSTEMS FO

RAGE D

d-track

ee link

er ready

24V electromechanical operator for sectional garage doors installable in residential, industrial and commercial environments.The sturdy mechanical structure and microprocessor technology of the control unit allow intensive use of the operator, while ensuring maximum reliability over time.Also, the D-Track torque control system and absolute encoder ensure extremely precise control of leaf movement and obstacle detection.

DIMENSIONS (mm)

TECHNICAL FEATURES

ARGO ARGO G

Control unit VENERE D ARGO VENERE D ARGO G

Motor power supply 24 V 24 V

Output revolutions 30 rpm 18 rpm

Type of limit switch absolute encoder absolute encoder

Slowdown yes yes

Impact reaction D-Track D-Track

Locking mechanical mechanical

Release cord or steel cable steel cable

Environmental conditions from -15 °C to 55 °C from -15 °C to 55 °C

Protection rating IP40 IP40

phase out

accessoriesP. 238

P925202 00001 ARGO Operator for sectional doors of surface area up to 20 m² and very intensive use.

d-track

P925206 00002 ARGO G Operator for sectional doors of surface area up to 35 m² and very intensive use.

d-track

VENERE D ARGO : Control panel for one 24V operator for garage doors

• Application: control unit for 1 24V garage door operator• Board power supply: 230V single-phase• Operator power supply: 24V• Main features: programming with display, incorporated dual channel receiver, D-Track anti-crushing system, slowdown during

N733148 - COR 30

N733149 - COR 40

N733421 - RCA

N733422 - RCAL

Lever release for ARGO with steel cable, length 3.5 m Lever release for ARGO with steel cable, length 7 m

N574039 - BOX

P125005 - BT BAT

Wall-mounted safe for steel cable release and electric control Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO

N999592 - CKK -

Pack of mounting tabs for ARGO and ARGO G

SYSTEMS FO

RAGE D

ee link

er ready

Hydraulic operator for very intensive use for overhead garage doors.Designed for the toughest conditions of use, it combines strength and the typical reliability of hydraulic operators.

137,5137,5

275290

DIMENSIONS (mm)

TECHNICAL FEATURES

BERMA BERMA SEB BERMA R BERMA SEB R BERMA SA R

Max torque 320 Nm 320 Nm 320 Nm 320 Nm 320 Nm

Control unit RIGEL 6 RIGEL 6 RIGEL 6 RIGEL 6 RIGEL 6

Motor power supply 230 V 230 V 230 V 230 V 230 V

Power input 250 W 250 W 250 W 250 W 250 W

Slowdown no no yes yes yes

Impact reaction Hydraulic clutch Hydraulic clutch Hydraulic clutch Hydraulic clutch Hydraulic clutch

Locking hydraulic hydraulic hydraulic hydraulic hydraulic

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

Protection rating IPX5 IPX5 IPX5 IPX5 IPX5

phase out

accessoriesP. 238

P915006 00001 BERMA Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. knob release.

P915103 00001 BERMA SEB Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. lever for steel cable release.

P915007 00001 BERMA R Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. knob release and hydraulic slowdown.

P915105 00001 BERMA SEB R Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. lever for steel cable release and hydraulic slowdown.

P915009 00001 BERMA SA R Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. automatic release and hydraulic slowdown.

RIGEL 6 220-230V 50/60HZ : Universal control panel with display for one or two 230V - 650+650W operatorsD113833 00002 - RIGEL 6 220-230V 50/60HZ - Recommended

• Application: universal control panel for one or two operators• Board power supply: 230V single-phase• Operators power supply: 230V single-phase 600+600W• Main features: removable terminal blocks, programming and diagnostics with display, built-in four-channel receiver, electro lock,

electronic torque limiter, electronic deceleration at opening and closing, a separate limit switch inputs for each motor, traffic light management, preheating hydraulic operators , weekly timer, possibility to delete a specific remote control, customization of the 4 radio channels, personalization of the duration of the delayed output, adjustable sensitivity to the obstacle.

• Main functions: automatic re-closing, separate motor working times, stays locked when closed, water hammer, 2/3/4 step logic, partial opening, fast closing, separate opening and closing

• Compatibility: RIGEL 4

D113833 00002 - RIGEL 6 220-230V 50/60HZ

D113680 00002 - ALPHA SD

Universal control panel with display for one or two 230V - 650+650W operators

Universal control panel with potentiometers for one 230V/500W single-phase operator

D113706 00002 - ALCOR N

N733038 - CA1

Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates

Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width

N733040 - CA2

N733041 - CA2C

Straight arm accessories for installation of two BERMA series operators on overhead door

Accessories for the installation of two BERMA series operators on overhead door (curved arms)

N733042 - CAS1

N733074 - CAS1L

Straight arm accessories for installation of one Berma operator =L=1000mm Spain version

N733048 - CAS2

N733075 - CAS2L

Straight arm accessories for installation of two Berma operators L=1000mm Spain version

N733020 - SEB -

External key release for BERMA, FORB, IGEA LB and IGEA LB BTì

SYSTEMS FO

RAGE D

ee link

er ready

Hydraulic operator for very intensive use for overhead garage doors.Designed for the toughest conditions of use, it combines strength and the typical reliability of hydraulic operators.

137,5137,5

275290

DIMENSIONS (mm)

TECHNICAL FEATURES

BERMA BERMA SEB BERMA R BERMA SEB R BERMA SA R

Max torque 320 Nm 320 Nm 320 Nm 320 Nm 320 Nm

Control unit RIGEL 6 RIGEL 6 RIGEL 6 RIGEL 6 RIGEL 6

Motor power supply 230 V 230 V 230 V 230 V 230 V

Power input 250 W 250 W 250 W 250 W 250 W

Slowdown no no yes yes yes

Impact reaction Hydraulic clutch Hydraulic clutch Hydraulic clutch Hydraulic clutch Hydraulic clutch

Locking hydraulic hydraulic hydraulic hydraulic hydraulic

Environmental conditions from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C from -15 °C to 60 °C

Protection rating IPX5 IPX5 IPX5 IPX5 IPX5

phase out

accessoriesP. 238

P915006 00001 BERMA Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. knob release.

P915103 00001 BERMA SEB Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. lever for steel cable release.

P915007 00001 BERMA R Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. knob release and hydraulic slowdown.

P915105 00001 BERMA SEB R Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. lever for steel cable release and hydraulic slowdown.

P915009 00001 BERMA SA R Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very

intensive use. automatic release and hydraulic slowdown.

RIGEL 6 220-230V 50/60HZ : Universal control panel with display for one or two 230V - 650+650W operatorsD113833 00002 - RIGEL 6 220-230V 50/60HZ - Recommended

• Application: universal control panel for one or two operators• Board power supply: 230V single-phase• Operators power supply: 230V single-phase 600+600W• Main features: removable terminal blocks, programming and diagnostics with display, built-in four-channel receiver, electro lock,

electronic torque limiter, electronic deceleration at opening and closing, a separate limit switch inputs for each motor, traffic light management, preheating hydraulic operators , weekly timer, possibility to delete a specific remote control, customization of the 4 radio channels, personalization of the duration of the delayed output, adjustable sensitivity to the obstacle.

• Main functions: automatic re-closing, separate motor working times, stays locked when closed, water hammer, 2/3/4 step logic, partial opening, fast closing, separate opening and closing

• Compatibility: RIGEL 4

D113833 00002 - RIGEL 6 220-230V 50/60HZ

D113680 00002 - ALPHA SD

Universal control panel with display for one or two 230V - 650+650W operators

Universal control panel with potentiometers for one 230V/500W single-phase operator

D113706 00002 - ALCOR N

N733038 - CA1

Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates

Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width

N733040 - CA2

N733041 - CA2C

Straight arm accessories for installation of two BERMA series operators on overhead door

Accessories for the installation of two BERMA series operators on overhead door (curved arms)

N733042 - CAS1

N733074 - CAS1L

N733048 - CAS2

N733075 - CAS2L

N733020 - SEB -

External key release for BERMA, FORB, IGEA LB and IGEA LB BTì

Automation systems for garage doors · 90 AUTOMATION SYSTEMS FOR GARAGE DOORS TIZIANO TIZIANO B GDA...

Documents

Transcript of Automation systems for garage doors · 90 AUTOMATION SYSTEMS FOR GARAGE DOORS TIZIANO TIZIANO B GDA...