automation systems - DTM
Transcript of automation systems - DTM
remote control and momentary button
small dimensions
flexibility in assigning functions
to the buttons on the remote controller
element of the DTM433MHz system
MINIR2 is a controller designed to work with roller shutter drives equipped with a single-phase 230VAC motor. It enables both remote and manual control of the roller shutter actuator. The compact housing allows installation in installation boxes.
available in versions:
MUL
TI
w w w . d t m . p lMINIR2 roller shutter controller
Radio
ReceiversRemotes
Gate
Controllers
Gate
Automation
Accessories
Gate
Motors
Access
Control
a u t o m a t i o n
s y s t e m s
MOUNTING IN
INSTALLATION BOX
power supply:power consumption:
remote memory capacity:
working temperature (min./max.):external dimensions of the housing (width x depth x height):
assembly method:weight:
actuator output:OPEN input (open-stop):
CLOSE input (closing-stop):STOP input:
STEP BY STEP input (open-stop-close-stop):opening and closing time adjustment:
radio module:transmission security:
type of modulation / frequency:antenna input impedance:
antenna:
User Interface:
function of unambiguous opening and closing:delay time with sudden change of direction:
STOP / NO STOP function after reversing:remote configuration:
easy remote registering function:deleting a single remote control:
230VAC 50 Hz ±10%10mA 35 remotes from the DTM433MHz series, and in the MULTI version additionally almost all variable-code models working in the KeeLoq® system-20°C /+55°C46 (68 with mounting brackets)x46x20mminstallation box Φ6042g
230V AC / 180W NO typeNO typeNO type NO type1s to 255s with an accuracy of 1s
integrated, superheterodyne64-bit Keeloq®OOK/ 433,92MHz50Ωwire
hardware interface implemented on five LEDs and two buttons that support a simple menuat the STEP BY STEP manual input1sthe roller shutter can be reversed without stoppingthe ability to assign any of the four functions (OPEN, STOP, CLOSE, STEP BY STEP) to any buttonthe ability to enter remote controls without using the receiver buttonsthe need to have a remote control removed
roller shutter controller
DTM System, ul. Brzeska 7, 85-145 Bydgoszcz, tel./fax +48 52 340 15 83, e-mail: [email protected]
Radio
ReceiversRemotes
Gate
Controllers
Gate
Automation
Accessories
Gate
Motors
Access
Control
a u t o m a t i o n s y s t e m s
Basic parameters
Executive elements
Radio parameters
Functionality