Autocad training
-
Upload
pious-patiala -
Category
Education
-
view
193 -
download
2
description
Transcript of Autocad training
AUTO CAD 2012
04/12/23 1
INTRODUCTION•Auto cad is a Cad software of Autodesk.
•It is invented in 1982 in US.
•Auto cad LT and Auto cad Mastering.
•Previously used in DOS, now a day used in windows.
•Used in every field Mechanical, Civil, Arch, Electrical, Interior Design, Automobile etc..
04/12/23 2
Auto Cad Interface
04/12/23 3
Types of Co-ordinates1.Absolute Co-ordinate.
2.Relative Co-ordinates.
3.Polar Co-ordinates.
AND
DDE (Direct Distance Entry ) Method
04/12/23 4
Absolute Co-ordinate• Absolute coordinates are based on the UCS origin (0,0)
04/12/23 5
Absolute Co-ordinate• Absolute coordinates are based on the UCS origin (0,0)
04/12/23 6
Absolute Co-ordinate
(X,Y)
(0,0)
(X,Y)
(30,0)
(X,Y)
(30,20)
(X,Y)
(0,20)
04/12/23 7
30
20Y
X1 2
34
Relative Co-ordinates• Relative coordinates are based on
the last point entered.
• When you know the location of a point in relation to the previous point.
• Use @ sign. For example, entering @3,4
04/12/23 8
Relative Co-ordinate
(Click Any where)(@30,0)
(@0,20)(@-30,0)
04/12/23 9
30
20Y
X
Y
XY
XY
X
(@0,-20)
1 2
34
Polar Co-ordinates
04/12/23 10
• Polar coordinates use a distance and an angle to locate a point.
• Use @ dis < angle. For example, @50<45
Polar Co-ordinate
(@30<0)
(@20<270)
(@20<90)(@30<180)
04/12/23 11
30
20
START YOUR 1ST CLASS-ALL THE BEST.
1 2
34
90
0
Click any where
90
0
90
0180
270
90
0180
270
04/12/23 12