AutoCAD® Civil 3D® 2012 Polish Country Kit” -...
Transcript of AutoCAD® Civil 3D® 2012 Polish Country Kit” -...
Tuckerman Feature Summary
Autodesk Confidential: Need-to-Know
AutoCAD® Civil 3D® 2012
“Polish Country Kit”
Workbook
Author:
Marek Majewski, APLIKOM Sp. z o.o.
Revision History Status
March 24, 2010 Draft 1
March 26, 2010 Final 2011
January 13, 2011 Draft 2012
April 26, 2011 Final 2012
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 2 of 62 4/26/2011
Country Kit Workbook
1 Overview................................................................................................................................................................. 3
1.1 Introduction ............................................................................................................................................... 3
2 Fonts and Text Styles .............................................................................................................................................. 4
3 Hatch Patterns ........................................................................................................................................................ 5
4 Layers...................................................................................................................................................................... 6
5 Reports ................................................................................................................................................................... 8
6 Drawing Settings > Object Layers ......................................................................................................................... 10
6.1 Object Layers ........................................................................................................................................... 10
6.2 Ambient Settings ..................................................................................................................................... 11
7 Object Styles ......................................................................................................................................................... 15
7.1 Multi-purpose Styles ................................................................................................................................ 15
7.2 Points ....................................................................................................................................................... 19
7.3 Point clouds ............................................................................................................................................. 20
7.4 Surfaces ................................................................................................................................................... 22
7.5 Parcels...................................................................................................................................................... 27
7.6 Grading .................................................................................................................................................... 28
7.7 Alignments ............................................................................................................................................... 28
7.8 Profiles ..................................................................................................................................................... 37
7.9 Superelevation view ................................................................................................................................ 45
7.10 Sections.................................................................................................................................................... 45
7.11 Catchment areas ...................................................................................................................................... 49
7.12 Pipe Networks ......................................................................................................................................... 49
7.13 Corridors .................................................................................................................................................. 52
7.14 Plan and Profile Sheets ............................................................................................................................ 54
8 Tool palette(s) ...................................................................................................................................................... 55
8.1 Subassemblies and assemblies ................................................................................................................ 55
9 Highway design check files ................................................................................................................................... 57
10 Quantity Take Off ................................................................................................................................................. 59
10.1 Overview of QTO ..................................................................................................................................... 59
10.2 Creation of QTO ....................................................................................................................................... 59
11 Superelevation standards ..................................................................................................................................... 61
12 Intersection feature – Styles, Names and Assembly sets ..................................................................................... 62
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 3 of 62 4/26/2011
1 Overview
1.1 Introduction
The document is an overview of all settings that AutoCAD Civil 3D 2012 Polish Country Kit contains.
The document contains abbreviations mention below:
AutoCAD Civil 3D 2012 - Civil 3D
AutoCAD Civil 3D 2012 Polish Country Kit – Polish CK
Polish CK contains folders mentioned below:
Template. Folder with template files with Polish styles for Civil 3D objects and labels. There are two files:
for surveyors and road and pipe designers.
Plan Production. Folder with templates that contains layout settings for Plan Production
Corridor Design Standards. Folder with a setup files for Design Criteria, Superelevation Table, Automatic
Curve Widening for corridor models and Roundabouts parameters definition.
Quantities Reports. Folder with files containing settings and templates for volume and material reports
for Corridor models or dynamic tables in the current drawing.
Reports. Folder with template files for various reports that can be generated for objects in design.
Toolbox. Folder with configuration file for the Toolbox tab in the Toolspace.
Assemblies. Folder containing drawings with predefined assemblies that can be accessed from the Tool
Palettes or during creating intersections.
Tool Palettes. Folder containing tool palettes with Polish assemblies and subassemblies.
Pay Item Data. Folder with files containing settings for reporting QTO reports from objects in the current
drawing.
All Civil 3D objects are generated with their own styles, when created in the drawing with a Civil 3D commands.
They can be also automatically labeled. All styles and default settings are set in the template file of Polish CK. All
styles, layers and settings may be freely modified by user and saved in template file. Note that new styles created
in design drawings will not be automatically saved in the template file of Polish CK. This has to be done manually
by user by dragging new styles from drawing file to template file.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 4 of 62 4/26/2011
2 Fonts and Text Styles
The table below lists used text styles.
Text Style Description Font Plotted Size
Standard txt 1mm – 5mm
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 5 of 62 4/26/2011
3 Hatch Patterns
The table below lists used hatch patterns.
Hatch Pattern Name Description Hatch Pattern File
SOLID Used for hatching Corridor
elements in Plan, some
specific views in Profiles
and Sections
Template
AR-SAND Used for hatching cut and
fill areas on profiles and
sections.
Template
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 6 of 62 4/26/2011
4 Layers
The table below lists used layers.
Layer Name Color Linetype Description
0 7 Continuous
C-BILANS 154 Continuous Wykres transportu mas ziemnych
C-BILANS-LINIE 154 Continuous Wykres transportu mas ziemnych: linie
C-BUDYNKI 8 Continuous Budynki importowane z programu Revit
C-DROGI-KORYTARZE 7 Continuous Drogi: korytarze
C-DROGI-KORYTARZE-WZORY 150 Continuous Drogi: wzory korytarzy
C-DROGI-PROBKI 8 Continuous Drogi: linie próbkowania
C-DROGI-PROBKI-ETYKIETY 7 Continuous Drogi: etykiety na liniach próbkowania
C-DROGI-PROFILE 7 Continuous Drogi: profile
C-DROGI-PROFILE-ETYKIETY 7 Continuous Drogi: etykiety w profilach
C-DROGI-PROFILE-PASMA 7 Continuous Drogi: pasma profili
C-DROGI-PROFILE-WIDOKI 7 Continuous Drogi: widoki profili
C-DROGI-PROFILE-WIDOKI-ETYKIETY 7 Continuous Drogi: etykiety w widokach profili
C-DROGI-PRZEKROJE 7 Continuous Drogi: powierzchnie w przekrojach
C-DROGI-PRZEKROJE-ARKUSZE 7 Continuous Drogi: powierzchnie w arkuszach
C-DROGI-PRZEKROJE-ETYKIETY 7 Continuous Drogi: etykiety w przekrojach
C-DROGI-PRZEKROJE-KORYTARZE 5 Continuous Drogi: korytarze w przekrojach
C-DROGI-PRZEKROJE-MATERIALY 7 Continuous Drogi: materiały w przekrojach
C-DROGI-PRZEKROJE-TABELE 7 Continuous Drogi: tabele na przekrojach
C-DROGI-PRZEKROJE-WIDOKI 7 Continuous Drogi: widoki przekrojów
C-DROGI-PRZEKROJE-WIDOKI-ETYKIETY 7 Continuous Drogi: etykiety w widokach przekrojów
C-DROGI-SKRZYŻOWANIA 7 Continuous Drogi: skrzyżowania
C-DROGI-SKRZYŻOWANIA-ETYKIETY 7 Continuous Drogi: etykiety skrzyżowao
C-DROGI-SYTUACJA 7 Continuous Drogi: linie trasowania
C-DROGI-SYTUACJA-ETYKIETY 7 Continuous Drogi: etykiety linii trasowania
C-DROGI-TABELE 7 Continuous Drogi: tabele danych
C-DROGI-ZESPOLY 7 Continuous Drogi: zespoły i podzespoły
C-DZIALKI 5 Continuous Działki
C-DZIALKI-ETYKIETY 7 Continuous Działki: etykiety
C-DZIALKI-LINIE 6 Continuous Działki: linie własności, narożniki
C-DZIALKI-LINIE-ETYKIETY 7 Continuous Działki: etykiety linii własności
C-DZIALKI-TABELE 7 Continuous Działki: tabele
C-GEO-FIGURY 150 Continuous Geodezja: figury
C-GEO-SIECI 6 Continuous Geodezja: sieci
C-OGOLNE-ETYKIETY-SEGMENTY 7 Continuous Ogólne: etykiety segmentów
C-OGOLNE-ETYKIETY-TESKTY 7 Continuous Ogólne: etykiety tekstowe
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 7 of 62 4/26/2011
C-PUNKTY 7 Continuous Punkty
C-PUNKTY-CHMURY 7 Continuous Chmury punktów
C-PUNKTY-ETYKIETY 7 Continuous Punkty: etykiety
C-PUNKTY-TABELE 7 Continuous Punkty: tabele
C-RAMKI 8 Continuous Ramki widoku
C-RAMKI-ETYKIETY 7 Continuous Ramki widoku: etykiety
C-RAMKI-LINIE 8 Continuous Ramki widoku: linie dopasowania
C-RAMKI-LINIE-ETYKIETY 7 Continuous Ramki widoku: etykiety na liniach dopasowania
C-SIECI-PROFILE 150 Continuous Sieci: profile
C-SIECI-PRZEKROJE 150 Continuous Sieci: przekroje
C-SIECI-PRZENIKANIE 1 Continuous Sieci: przenikanie
C-SIECI-RURY 150 Continuous Sieci: rury
C-SIECI-RURY-ETYKIETY 154 Continuous Sieci: etykiety rur
C-SIECI-STRUKTURY 150 Continuous Sieci: struktury
C-SIECI-STRUKTURY-ETYKIETY 154 Continuous Sieci: etykiety struktur
C-SIECI-TABELE 7 Continuous Sieci: tabele danych
C-TEREN 7 Continuous Modele terenu
C-TEREN-ETYKIETY 7 Continuous Modele terenu: etykiety
C-TEREN-LINIE 1 Continuous Modele terenu: linie spływu
C-TEREN-SKARPY 94 Continuous Modele terenu: skarpy
C-TEREN-SKARPY-ETYKIETY 7 Continuous Modele terenu: etykiety skarp
C-TEREN-SKARPY-LINIE 1 Continuous Modele terenu: linie charakterystyczne skarp
C-TEREN-TABELE 7 Continuous Modele terenu: tabele
C-ZLEWNIE 1 Continuous Zlewnie
C-ZLEWNIE-ETYKIETY 7 Continuous Zlewnie: etykiety
Defpoints 7 Continuous
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 8 of 62 4/26/2011
5 Reports
The table below lists used reports:
Report Name Description
Linia trasowania > Parametry segmentów Polish report of alignment segments parameters.
Linia trasowania > Pikietaż i segmenty Polish report of alignment segments parameters and stationing.
Linia trasowania > Pikiety punktów przecięcia stycznych Polish report of alignment PI stationing.
Linia trasowania > Pikietaż narastająco Polish report of alignment incremental stationing.
Linia trasowania > Tyczenie linii trasowania Polish report of alignment stakeout.
Linia trasowania > Weryfikacja kryteriów projektowych Polish report of alignment verification with design standards.
Linia trasowania > Certyfikat geodety Polish surveyors certificate of alignment.
Korytarz > Nachylenia pasów ruchu Polish report of corridor cross slopes.
Korytarz > Linie rzutowania Polish report of corridor daylight lines.
Korytarz > Linie charakterystyczne Polish report of corridor feature lines.
Korytarz > Frezowanie Polish report of corridor milling parameters.
Korytarz > Tyczenie spadków korytarza Polish report of corridor slopes stakeout.
Korytarz > Punkty przekroju Polish report of corridor cross section points.
Działka > Raport powierzchni Polish report of parcel area.
Działka > Raport odwrotny Polish report of parcel area.
Działka > Objętośd względem działek Polish report of surface volumes according to parcel area.
Działka > Pomiary i granice Polish report of parcel metes and bounds.
Działka > Certyfikat geodety Polish surveyors certificate of parcel area.
Działka > Powierzchnie do CSV Polish report of parcel area to CSV.
Działka > Kontrola mapowa działki Polish report of parcel map data.
Punkty > Lista punktów Polish report of points list.
Punkty > Odsunięcie od linii trasowania Polish report of points offset to alignment.
Punkty > Tyczenie promieniowe Polish report of points stakeout.
Punkty > Lista punktów do CSV Polish report of points list to CSV.
Profil > Profil Polish report of profile data.
Profil > Punkty przecięcia i krzywe pionowe Polish report of profile PVIs and vertical curves.
Profil > Pikietaż narastająco Polish report of profile incremental stationing.
Profil > Krzywe pionowe Polish report of profile vertical curves.
Profil > Profil do CSV Polish report of profile data to CSV.
Profil > Weryfikacja kryteriów projektowych Polish report of profile verification with design standards.
Profil > Różnice rzędnych profili Polish report of profile elevation differences.
Rury > Rury Polish report of pipes data.
Rury > Struktury Polish report of structures data.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 9 of 62 4/26/2011
Rury > Rury i struktury Polish report of pipes and structures data.
Rury > Rury do CSV Polish report of pipes data to CSV
Rury > Struktury do CSV Polish report of structures data to CSV.
Powierzchnia > Powierzchnia do CSV Polish report of surface data to CSV.
Powierzchnia > Powierzchnia Polish report of surface data.
Linie nieciągłości > Analiza linii nieciągłości Polish report of breaklines data
Linie nieciągłości > Przecinanie się linii nieciągłości
Polish report of breaklines intersections
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 10 of 62 4/26/2011
6 Drawing Settings > Object Layers
6.1 Object Layers
The following table lists all object types:
Object Default Layer
Alignment C-DROGI-SYTUACJA
Alignment-Labeling C-DROGI-SYTUACJA-ETYKIETY
Alignment Table C-DROGI-TABELE
Assembly C-DROGI-ZESPOLY
Building Site C-BUDYNKI
Catchment C-ZLEWNIE
Catchment-Labeling C-ZLEWNIE-ETYKIETY
Corridor C-DROGI-KORYTARZE
Corridor Section C-DROGI-PRZEKROJE-KORYTARZE
Feature Line C-DROGI-SYTUACJA
General Note Label C-OGOLNE-ETYKIETY-TESKTY
General Segment Label C-OGOLNE-ETYKIETY-SEGMENTY
Grading C-TEREN-SKARPY
Grading-Labeling C-TEREN-SKARPY-ETYKIETY
Grid Surface C-TEREN
Grid Surface-Labeling C-TEREN-ETYKIETY
Interference C-SIECI-PRZENIKANIE
Intersection C-DROGI-SKRZYŻOWANIA
Intersection-Labeling C-DROGI-SKRZYŻOWANIA-ETYKIETY
Mass Haul Line C-BILANS-LINIE
Mass Haul View C-BILANS
Match Line C-RAMKI-LINIE
Match Line-Labeling C-RAMKI-LINIE-ETYKIETY
Material Section C-DROGI-PRZEKROJE-MATERIALY
Material Table C-DROGI-TABELE
Parcel C-DZIALKI
Parcel-Labeling C-DZIALKI-ETYKIETY
Parcel Segment C-DZIALKI-LINIE
Parcel Segment-Labeling C-DZIALKI-LINIE-ETYKIETY
Parcel Table C-DZIALKI-TABELE
Pipe C-SIECI-RURY
Pipe-Labeling C-SIECI-RURY-ETYKIETY
Pipe and Structure Table C-SIECI-TABELE
Pipe Network Section C-SIECI-PRZEKROJE
Pipe or Structure Profile C-SIECI-PROFILE
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 11 of 62 4/26/2011
Point Table C-PUNKTY-TABELE
Profile C-DROGI-PROFILE
Profile-Labeling C-DROGI-PROFILE-ETYKIETY
Profile View C-DROGI-PROFILE-WIDOKI
Profile View-Labeling C-DROGI-PROFILE-WIDOKI-ETYKIETY
Sample Line C-DROGI-PROBKI
Sample Line-Labeling C-DROGI-PROBKI-ETYKIETY
Section C-DROGI-PRZEKROJE
Section-Labeling C-DROGI-PRZEKROJE-ETYKIETY
Section View C-DROGI-PRZEKROJE-WIDOKI
Section View-Labeling C-DROGI-PRZEKROJE-WIDOKI-ETYKIETY
Section View Quantity Takeoff Table C-DROGI-PRZEKROJE-TABELE
Sheet C-DROGI-PRZEKROJE-ARKUSZE
Structure C-SIECI-STRUKTURY
Structure-Labeling C-SIECI-STRUKTURY-ETYKIETY
Subassembly C-DROGI-ZESPOLY
Surface Legend Table C-TEREN-TABELE
Survey Figure C-GEO-FIGURY
Survey Network C-GEO-SIECI
Tin Surface C-TEREN
6.2 Ambient Settings
The following are the drawing level ambient settings:
Node Setting Default
General
Plotted Unit Display Type decimal
Set AutoCAD Units no
Save Command Changes to Settings no
Show Event Viewer yes
Show Tooltips yes
Imperial to Metric conversion Use International Foot
New Entity Tooltip State on
Driving Direction Right Side of the Road
Drawing Unit meter
Drawing Scale 0.500
Scale Inserted Objects no
Independent Layer On no
Labeling
Labeling Prompt Method Dialog
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 12 of 62 4/26/2011
Unitless
Precision 3
Rounding round normal
Sign sign negative '-'
Distance
Unit meter
Precision 3
Rounding round normal
Sign sign negative '-'
Dimension
Unit millimeter
Precision 3
Rounding round normal
Sign sign negative '-'
Coordinate
Unit meter
Precision 4
Rounding round normal
Sign sign negative '-'
Grid Coordinate
Unit meter
Precision 4
Rounding round normal
Sign sign negative '-'
Elevation
Unit meter
Precision 3
Rounding round normal
Sign sign negative '-'
Area
Unit square meter
Precision 2
Rounding round normal
Sign sign negative '-'
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 13 of 62 4/26/2011
Volume
Unit cubic meter
Precision 2
Rounding round normal
Sign sign negative '-'
Speed
Unit kilometer/hr.
Precision 0
Rounding round normal
Sign sign negative '-'
Angle
Unit degree
Precision 4
Rounding round normal
Format decimal
Sign sign negative '-'
Drop Decimal for Whole Numbers no
Drop Leading Zeros for Degrees yes
Direction
Unit degree
Precision 6
Rounding round normal
Format DD° MM' SS.SS" (spaced)
Direction short name
Capitalization upper case
Sign sign negative '-'
Measurement Type Bearings
Bearing Quadrant 1 - NE
Drop Decimal for Whole Numbers no
Drop Leading Zeros for Degrees yes
Lat Long
Unit degree
Precision 6
Rounding round normal
Format DD° MM' SS.SS" (spaced)
Direction prefix short name
Capitalization upper case
Drop Decimal for Whole Numbers no
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 14 of 62 4/26/2011
Drop Leading Zeros for Degrees yes
Grade
Precision 2
Rounding round normal
Format percent
Sign sign negative '-'
Slope
Precision 2
Rounding round normal
Format rise:run
Sign sign negative '-'
Grade/Slope
Precision 2
Rounding round normal
Format percent
Sign sign negative '-'
Station
Unit meter
Format station format
Precision 3
Rounding round normal
Sign sign negative '-'
Station Delimiter Character plus sign '+'
Station Delimiter Position 1+000
Drop Decimal for Whole Numbers no
Drop Leading Zeros Right of Station Character yes
Minimum Display Width 0
Transparent Commands
Prompt for 3D Points false
Prompt for Y before X false
Prompt for Easting then Northing false
Prompt for Longitude then Latitude false
Tuckerman Feature Summary
Autodesk Confidential: Need-to-Know
7 Object Styles
7.1 Multi-purpose Styles
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Feature Line Styles Description Screen grab / DWF / DWG Default
Bariera Corridor feature line
Chodnik Corridor feature line
Korona Corridor feature line
Krawędź nakładki Corridor feature line
Krawędź nieutwardzonego pobocza Corridor feature line
Krawędź pasa jezdni Corridor feature line
Krawędź utwardzonego pobocza Corridor feature line
Linia krawężnika Corridor feature line
Linia rzutowania - nasyp Corridor feature line
Linia rzutowania - wykop Corridor feature line
Linia ścieku Corridor feature line
Linia tarasu Corridor feature line
Nawierzchnia – linia charakterystyczna
Corridor feature line
Podbudowa – linia charakterystyczna Corridor feature line
Punkt zaczepienia skarpy Corridor feature line
Punkt zaczepienia skarpy nasypu Corridor feature line
Punkt zaczepienia skarpy wykopu Corridor feature line
Rów Corridor feature line
Rzutowanie Corridor feature line
Rzutowanie - podbudowa Corridor feature line
Zmiana nachylenia pomiędzy pasami Corridor feature line
Brak kodów Corridor feature line
Niewidoczna Corridor feature line – invisible in all views
Niewidoczna w 2D Corridor feature line – visible only in 3D
Linia rzutowania Feature line style for grading
Code Set Styles Description Screen grab / DWF / DWG Default
Edytor przekroju korytarza Code set style for corridor display on section editor
Korytarz - 3D z materiałami Code set style for corridor display in 3D with materials
Korytarz - plan bez linii poprzecznych Code set style for corridor display on plan without crossing lines along sections
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 16 of 62 4/26/2011
Marker Styles Description Screen grab / DWF / DWG
Default
Sieci - podstawowy Marker style for pipe network
Plan profil - punkt przecięcia Marker style for alignment and profile points
Plan profil - punkt elementu Marker style for alignment and profile points
Plan profil - punkt wysoki Marker style for alignment and profile points
Plan profil - punkt odniesienia Marker style for alignment and profile points
Rzutowanie - nasyp Marker style for corridor
Rzutowanie - wykop Marker style for corridor
Punkt obrotu Marker style for corridor
Krawędź nakładki Marker style for corridor
Krawędź pobocza utwardzonego Marker style for corridor
Korona poniżej Marker style for corridor
Rów - dno Marker style for corridor
Korytarz - plan z kolorami Code set style for corridor display on plan with color fills
Korytarz - plan z liniami poprzecznymi Code set style for corridor display on plan with crossing lines along sections
Korytarz - plan z materiałami Code set style for corridor display on plan with materials
Korytarz - wszystkie kody widoczne Code set style for corridor display on plan with all codes visible
Korytarz - zestawienie ilości Code set style for corridor display on plan with QTO materials attached
Przekrój normalny (zespół) Code set style for corridor display on assembly
Widoki przekrojów Code set style for corridor display on section view
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 17 of 62 4/26/2011
Punkt oznaczony Marker style for corridor
Krawędź pobocza nieutwardzonego Marker style for corridor
Krawędź jezdni Marker style for corridor
Taras Marker style for corridor
Krawędź Marker style for corridor
Rów - krawędź Marker style for corridor
Krawężnik Marker style for corridor
Zmiana nachylenia pasa ruchu Marker style for corridor
Podbudowa Marker style for corridor
Bariera Marker style for corridor
Ściek Marker style for corridor
Niewidoczny Marker style for corridor - invisible
Przyłącza do budynku Marker style for ADSK import from Revit
Przekrój Marker style for section view
Przekrój - punkt rzutowania Marker style for section view
Zlewnie – początek segmentu Marker style for catchment area
Zlewnie – punkt najbardziej odległy Marker style for catchment area
Zlewnie - punkt odpływu Marker style for catchment area
Link Styles Description Screen grab / DWF / DWG
Default
Góra Link style for corridor
Frez Link style for corridor
Rzędna odniesienia Link style for corridor
Widok przekroju Link style for corridor in section view
Nawierzchnia Link style for corridor
Brak łącz Link style for corridor – no links
Nawierzchnia1 Link style for corridor
Niewidoczny w 2D Link style for corridor visible only in 3D
Obrzeże Link style for corridor
Nawierzchnia2 Link style for corridor
Podsypka Link style for corridor
Żwir Link style for corridor
Nakładka Link style for corridor
Baza Link style for corridor
Humus Link style for corridor
Sieci - podstawowy Link style for pipe network
Shape Styles Description Screen grab / DWF / DWG
Default
Brak wypełnienia Shape invisible
Pobocze Shape style for assemblies
Ścieżka rowerowa Shape style for assemblies
Podkład Shape style for assemblies
Ława Shape style for assemblies
Belka Shape style for assemblies
PasRozdziału Shape style for assemblies
Tor Shape style for assemblies
Most Shape style for assemblies
Przekrój - nasyp Shape for fill hatch on section view
Przekrój - wykop Shape for cut hatch on section view
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 18 of 62 4/26/2011
Profil - nasyp Shape for fill hatch on profile view
Profil - wykop Shape for cut hatch on profile view
Profil - wiele obwiedni Shape for multiboundary hatch on profile view
Kolory - Trawa Shape style for corridor color fill
Kolory - Asfalt Shape style for corridor color fill
Kolory - Kostka szara Shape style for corridor color fill
Kolory - żwir Shape style for corridor color fill
Kolory - Beton Shape style for corridor color fill
Kolory - Kostka różowa Shape style for corridor color fill
Slope Pattern Style Description Screen grab / DWF / DWG Default
Nasyp Pattern for fill slope
Wykop Pattern for cut slope
Skarpa Pattern for all slopes
Multipurpose Label Styles Description Screen grab / DWF / DWG Default
Note
Tekst bez ramki (2.5mm) Note label without frame
Tekst bez ramki (3mm) Note label without frame
Tekst bez ramki (5mm) Note label without frame
Tekst z ramką prostokątną (2.5mm) Note label with rectangular frame
Tekst z ramką prostokątną (3mm) Note label with rectangular frame
Tekst z ramką prostokątną (5mm) Note label with rectangular frame
Tekst z ramką zaokrągloną (2.5mm) Note label with rounded frame
Tekst z ramką zaokrągloną (3mm) Note label with rounded frame
Tekst z ramką zaokrągloną (5mm) Note label with rounded frame
Line
Długośd Length of line
Kierunek i długośd Direction and length of line
Curve
Promieo i długośd Radius and length of arc
Promieo długośd i kąt delta Radius length and delta of arc
Marker
Rzędna z kotą Elevation mark
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 19 of 62 4/26/2011
Link
Spadki procentowe Slope label
Spadki proporcjonalne Grade label
Shape
7.2 Points
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
User Defined Attribute Classifications Description Screen grab / DWF / DWG Default
Point Styles Description Screen grab / DWF / DWG
Default
Brak znacznika No marker
Drzewo iglaste Point style for tree
Drzewo liściaste Point style for tree
Granica działki Point style for parcel border
Granica trwała Point style for border
Hydrant Point style for hydrant
Kratka ściekowa Point style for inlet
Osadnik Point style for basin
Osnowa pozioma Point style for map matrix
Osnowa wysokościowa Point style for map matrix
Punkt łuku pionowego Point style for vertical curve
Punkt łuku poziomego Point style for horizontal curve
Punkt roboczy Point style
Słup hektometrowy Point style for hectometer
Słup kilometrowy Point style for kilometer
Studnia Point style for well
Właz kwadratowy Point style for rectangular manhole
Właz prostokątny Point style for rectangular manhole
Właz okrągły Point style for circular manhole
Zasuwa Point style for valve
Skrzyżowanie na sytuacji Point style for intersection on plan
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 20 of 62 4/26/2011
Skrzyżowanie na profilu Point style for intersection on profile
Wpust na sytuacji Point style for inlet on plan
Wpust na profilu Point style for inlet on profile
Point Label Styles Description Screen grab / DWF / DWG Default
Brak opisu No label
Numer - 1 mm Only point number
Numer - 1.5 mm Only point number
Numer - 2 mm Only point number
Numer - 2.5 mm Only point number
Numer rzędna i opis - 1 mm Point number, elevation and description
Numer rzędna i opis - 1.5 mm
Point number, elevation and description
Numer rzędna i opis - 2 mm Point number, elevation and description
Numer rzędna i opis - 2.5 mm
Point number, elevation and description
Skrzyżowanie na sytuacji Intersection point label on plan
Wpust na sytuacji Inlet point label on plan
Description Key Sets Description Screen grab / DWF / DWG Default
Point Table Styles Description Screen grab / DWF / DWG Default
Długośd i szerokośd Point data table
Współrzędna wsch i pn Point data table
7.3 Point clouds
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Point Cloud Styles Description Screen grab / DWF / DWG
Brak Point Cloud object is not displayed
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 21 of 62 4/26/2011
Jeden kolor Point Cloud object is displayed in one color
Klasyfikacja punktów LIDAR
Point Cloud object is displayed in different colors according to LIDAR points classification if the point cloud database contains LIDAR point classification data
Natężenie skali koloru - Czerwony
Point Cloud object is displayed in red color intensity scale if the point cloud database contains intensity data
Natężenie skali koloru - Niebieski
Point Cloud object is displayed in blue color intensity scale if the point cloud database contains intensity data
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 22 of 62 4/26/2011
Natężenie skali koloru - Zielony
Point Cloud object is displayed in green color intensity scale if the point cloud database contains intensity data
Natężenie skali szarości Point Cloud object is displayed in grayscale intensity if the point cloud database contains intensity data
Paleta True Color Point Cloud object is displayed in true color palette if the point cloud database contains RGB data
Zakresy rzędnych Point Cloud object is displayed in elevation ranges, at a specified number of ranges or range interval and a color scheme
7.4 Surfaces
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Surface Styles Description Screen grab / DWF / DWG
Brak No display
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 23 of 62 4/26/2011
Granica 2D – border; 3D – triangulation;
Granica i punkty 2D – border, points; 3D – triangulation;
Granica i siatka 2D – border, triangles; 3D – triangulation;
Granica i warstwice
2D – border, contours; 3D – triangulation;
Granica warstwice i hipsometria 2D
2D – border, contours, elevation ranges; 3D – triangulation;
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 24 of 62 4/26/2011
Granica warstwice i hipsometria 3D
2D – border, contours; 3D – triangulation, elevation ranges;
Granica warstwice i spadki 2D
2D – border, contours, slope ranges; 3D – triangulation;
Granica warstwice i spadki 3D
2D – border, contours; 3D – triangulation, slope ranges;
Granica warstwice i wektory spadków
2D – border, contours, slope arrows; 3D – triangulation;
Warstwice (tło) 2D – border, gray contours; 3D – triangulation;
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 25 of 62 4/26/2011
Zlewnie 2D – watersheds; 3D – triangulation;
Granica i hipsometria 2D-3D
2D – border, elevation ranges; 3D – triangulation, elevation ranges;
Interwały rzędnych – niebieskie
2D – blue elevation intervals; 3D – triangulation;
Interwały rzędnych – zielone
2D – green elevation intervals; 3D – triangulation;
Korytarz – model warstwicowy
2D – contours for corridor; 3D – triangulation; Section – red line;
Korytarz – powierzchnia odniesienia
2D – none; 3D – triangulation; Section – red line;
Wykopy i nasypy 2D – green and red elevation intervals with datum; 3D – triangulation;
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 26 of 62 4/26/2011
Surface Label Styles Name/Type
Description Screen grab / DWF / DWG Default
Contour
Tło Gray label
Wydruk Label for printing
Slope
Spadek procentowy Slope label
Spadek proporcjonalny Grade label
Spot Elevation
Rzędna z kotą Elevation with symbol
W metrach Elevation in meters
W stopach Elevation in feet
Watershed
Nr (bez ramki) Number without border
Nr i typ (bez ramki) Number and type without border
Nr i typ (z ramką) Number and type with border
Nr typ i powierzchnia (z ramką) Number, type and area with border
Typ (bez ramki) Type without border
Surface Table Styles Name/Type Description Screen grab / DWF / DWG Default
Direction
Kierunek min i max Range of directions
Elevation
Rzędna min i max Range of elevations
Slope
Spadek min i max Range of slopes
Slope Arrow
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 27 of 62 4/26/2011
Spadek min i max Range of slopes
Contour
Warstwice min i max Range of contours
Watershed
Opis zlewni List of warersheds
User Defined Contour
Warstwice użytkownika Range of user contours
7.5 Parcels
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
User-Defined Attributes Description Screen grab / DWF / DWG Default
Parcel Styles Description Screen grab / DWF / DWG Default
Przestrzeo otwarta Open space
Działka Parcel
Droga (lokalna) Road
Parcel Label Styles Description Screen grab / DWF / DWG Default
Area
Nazwa powierzchnia i obwód Name, area and perimeter
Powierzchnia Area
Tylko numer Number
Line
Całkowita odległośd i kierunek Length and direction
Kierunek i odległośd (kurze łapki) Length and direction with symbols
Kierunek nad odległością Length and direction
Curve
Odległośd nad promieniem i deltą Length, radius and delta
Parcel Table Styles Description Screen grab / DWF / DWG Default
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 28 of 62 4/26/2011
Line
Długośd i kierunek Length and direction
Curve
Długośd promieo i delta Length, radius and delta
Segment
Długośd oraz kierunek lub promieo i delta
Length and direction or length, radius and delta
Area
Nazwa powierzchnia i obwód Name, area and perimeter
Tylko powierzchnia Area
7.6 Grading
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Grading Styles Description Screen grab / DWF / DWG Default
Projekt - nasyp (niebieski) Grading style for fill
Projekt - wykop (czerwony) Grading style for cut
Wydruk - skarpa Grading style for printing
Grading Criteria Sets Description Screen grab / DWF / DWG
Default
Na powierzchnię wg spadku Grading to surface – grade not defined
Na powierzchnię wg spadku 1:1 Grading to surface – grade 1:1
Na powierzchnię wg spadku 1:1.5 Grading to surface – grade 1:1.5
Na powierzchnię wg spadku 1:2 Grading to surface – grade 1:2
Na powierzchnię wg spadku 1:3 Grading to surface – grade 1:3
Na powierzchnię wg spadku 1:6 Grading to surface – grade 1:6
Odległośd wg spadku (procent) Grading to distance – slope
Odległośd wg spadku (proporcja) Grading to distance – grade
Rzędna względna wg spadku Grading to elevation
7.7 Alignments
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Alignment Style Description Screen grab / DWF / DWG
Projekt - oś podrzędna Design style for secondary centerline
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 29 of 62 4/26/2011
Projekt - oś główna Design style for primary centerline
Projekt - odsunięcia Design style for offsets
Projekt - wyłukowania Design style for curb returns
Projekt - krawędź jezdni Design style for edge of lane
Projekt - krawędź chodnika
Design style for edge of walkway
Projekt - krawędź pasa rozdzielającego
Design style for edge of median
Projekt - linia trasowania z istniejącej
Design style for alignment copy
Wydruk - oś pomocnicza Print style for secondary centerline
Wydruk - oś główna Print style for primary centerline
Wydruk - krawędzie Print style for offsets
Alignment Design Checks Description Screen grab / DWF / DWG Default
Design Check Sets
Kryteria PL
Line
Maksymalna długośd stycznej maximum line length – from tables
Minimalna długośd stycznej minimum line length – from tables
Curve
Spiral
A>R/3
R>A
Tangent Intersection
Alignment Label Type/Name Description Screen grab / DWF / DWG Default
Alignment Label Sets
Brak opisów No labels
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 30 of 62 4/26/2011
Kilometraż i punkty geometrii (prostopadle czytelne)
Labels on stations, horizontal geometry points – perpendicular and readable
Kilometraż i punkty geometrii (prostopadle wzdłuż linii)
Labels on stations, horizontal geometry points – perpendicular and set to alignment direction
Kilometraż i punkty geometrii (równolegle czytelne)
Labels on stations, horizontal geometry points – parallel and readable
Kilometraż i punkty geometrii (równolegle wzdłuż linii)
Labels on stations, horizontal geometry points – parallel and set to alignment direction
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 31 of 62 4/26/2011
Kilometraż punkty geometrii i profil (prostopadle czytelne)
Labels on stations, horizontal and vertical geometry points – perpendicular and readable
Kilometraż punkty geometrii i profil (prostopadle wzdłuż linii)
Labels on stations, horizontal and vertical geometry points – perpendicular and set to alignment direction
Kilometraż punkty geometrii i profil (równolegle czytelne)
Labels on stations, horizontal and vertical geometry points – parallel and readable
Kilometraż punkty geometrii i profil (równolegle wzdłuż linii)
Labels on stations, horizontal and vertical geometry points – parallel and set to alignment direction
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 32 of 62 4/26/2011
Kilometraż punkty geometrii i przechyłki (prostopadle wzdłuż linii)
Labels on stations, horizontal geometry points, superelevations – perpendicular and set to alignment direction
Kilometraż punkty geometrii i przechyłki (równolegle wzdłuż linii)
Labels on stations, horizontal geometry points, superelevations – parallel and set to alignment direction
Kilometraż punkty geometrii profil i przechyłki (prostopadle wzdłuż linii)
Labels on stations, horizontal and vertical geometry points, superelevations – perpendicular and set to alignment direction
Kilometraż punkty geometrii profil i przechyłki (równolegle wzdłuż linii)
Labels on stations, horizontal and vertical geometry points, superelevations – parallel and set to alignment direction
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 33 of 62 4/26/2011
Prędkości projektowe (równolegle czytelne)
Design speeds – parallel and readable
Skrzyżowanie Labels with station on beginning and end only – for intersection purposes
Tylko kilometraż (prostopadle)
Labels on stations – perpendicular
Tylko kilometraż (równolegle)
Labels on stations – parallel
Major Station Label at Major Stations
Prostopadle bez znacznika
Prostopadle z hektometrem
Prostopadle z kilometrem
Prostopadle z linią
Prostopadle ze znacznikiem
Równolegle z hektometrem
Równolegle z kilometrem
Równolegle ze znacznikiem
Minor Station Label at Minor Stations
Prostopadle ze znacznikiem (bez 0+)
Prostopadle ze znacznikiem (wraz z 0+)
Znacznik
Geometry Point Label at Geometry Points
Pikietaż początku i kooca
Prostopadle centralnie ze znacznikiem
Prostopadle czytelne
Prostopadle wdłuż linii
Profile Geometry Point Labels at the profile geometry points on the alignment
Prostopadle czytelne
Prostopadle wzdłuż linii
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 34 of 62 4/26/2011
Station Equation Station equation Labels
Piketa w przód i wstecz
Design Speed Design Speed labels
Kilometraż nad prędkością
Superelevation Critical Points Labels at the critical Superelevation points on the alignment
maksymalna przechyłka
normalna korona
odwrotna korona
poziom korony
Station Offset Station Offset Labels
Brak No label
Dane odsunięcia pikietażu Offset point data
Line Tangent labels
Brak No label
Długośd Length
Kierunek nad długością Direction, length
Nazwa linii trasowania Alignment name
Curve Arc Labels
Dane łuku Curve data
Nazwa linii trasowania Alignment name
Promieo i długośd łuku Radius, length
Promieo łuku Radius
Spiral Spiral Labels
Brak No label
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 35 of 62 4/26/2011
Dane krzywej Spiral data
Nazwa linii trasowania Alignment name
Tangent Intersection PI Labels
Brak No label
Dane w ramce PI data
Pikietaż PI station
Punkt przecięcia
Indeks i współrzędne
Indeks i współrzędne w tabeli
Indeks współrzędne dane o krzywej przejściowej
Indeks współrzędne dane o łuku
Indeks współrzędne dane o łuku i krzywej przejściowej
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 36 of 62 4/26/2011
Zaawansowane dane o krzywa-łuk-krzywa
Zaawansowane dane o łuku
Alignment Table Type/Name
Description Screen grab / DWF / DWG Default
Line
Numer długośd kierunek współrzędne
Number, length, direction
Curve
Numer promieo długośd cięciwa współrzędne
Curve data
Spiral
Numer długośd A kierunek współrzędne
Spiral data
Segment
Styczne łuki i krzywe Line, curve or spiral element in a single table
Współrzędne do tyczenia
Stakeout data
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 37 of 62 4/26/2011
7.8 Profiles
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Profile Style Description Screen grab / DWF / DWG Default
Brak No display
Projekt - niweleta odsunięcia Design style for offsets
Projekt - niweleta osi Design style for centerline
Projekt - niweleta rowu lewego Design style for left ditch
Projekt - niweleta rowu prawego Design style for right ditch
Projekt - niweleta wyłukowania Design style for curb return
Teren istniejący Existing ground profile
Wydruk - niweleta osi Plot style for centerline
Wydruk - niweleta rowu lewego Plot style for left ditch
Wydruk - niweleta rowu prawego Plot style for right ditch
Profile Design Checks Description Screen grab / DWF / DWG Default
Design Check Sets
Kryteria PL - drogi dwujezdniowe Design criteria for double lane roads
Kryteria PL - drogi jednojezdniowe Design criteria for single lane roads
Line
Maksymalne nachylenie niwelety Max slope of FG profile
Curve
Promieo minimalny krzywej wypukłej - 2 jezdnie
Min radius of crest curve – 2 lanes
Promieo minimalny krzywej wypukłej - 1 jezdnia
Min radius of crest curve – 1 lane
Promieo minimalny krzywej wklęsłej Min radius of sag curve
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 38 of 62 4/26/2011
Profile Label Type/Name Description Screen grab / DWF / DWG Default
Profile Label Sets
Brak etykiet
Linie odniesienia z profilu Lines for FG profile geometry points
Linie odniesienia z profilu i geometria
Lines for FG profile geometry points, vertical curve data
Linie odniesienia z profilu i planu
Lines for alignment and FG profile geometry points
Linie odniesienia z profilu planu i geometria
Lines for alignment and FG profile geometry points, vertical curve data
Major Station
Standardowy
Minor Station
Standardowy
Horizontal Geometry Point
Linia odniesienia
Linia odniesienia z etykietą
Grade Breaks
Linia odniesienia
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 39 of 62 4/26/2011
Wierzchołek
Line
Nachylenie
Curve
Dane łuku
Linia odniesienia
Profile View Type/Name Description Screen grab / DWF / DWG Default
Bez siatki Profile view without grid
Bez siatki z liniami przekrojów
Profile view without grid with lines from sections
Bez siatki z liniami sytuacji Profile view without grid with lines from alignment geometry points
Siatka główna nieprzycięta Profile view with grid
Siatka przycięta w pionie i poziomie
Profile view with clipped grid
Szybki profil - nie skażony pionowo
Quick profile – no vertical scale exaggeration
Szybki profil - nie skażony pionowo z siatką
Quick profile – no vertical scale exaggeration, grid
Szybki profil - skażony pionowo 5x
Quick profile –vertical scale exaggeration x5
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 40 of 62 4/26/2011
Szybki profil - skażony pionowo 5x z siatką
Quick profile –vertical scale exaggeration x5, grid
Szybki profil - skażony pionowo 10x
Quick profile –vertical scale exaggeration x10
Szybki profil - skażony pionowo 10x z siatką
Quick profile –vertical scale exaggeration x10, grid
Profile View Label Type/Name
Description Screen grab / DWF / DWG Default
Station Elevation
Rzędna z kotą Elevation with symbol
Depth
Różnica rzędnych Elevation difference
Projection
Obiekty AutoCAD AutoCAD entities
Skrzyżowanie nieutwardzone
Flag for unpaved intersection
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 41 of 62 4/26/2011
Skrzyżowanie utwardzone Flag for paved intersection
Wpust na profilu Symbol for inlet
Profile Band Type/Name Description Screen grab / DWF / DWG Default
Profile Band Set
Bez rowów i przechyłek (z kilometrażu i niwelety)
Proflie data without ditches and superelevation. Labels are drawn in station intervals and FG geometry points.
Bez rowów i przechyłek (z kilometrażu)
Proflie data without ditches and superelevation. Labels are drawn in station intervals.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 42 of 62 4/26/2011
Bez rowów i przechyłek (z niwelety)
Proflie data without ditches and superelevation. Labels are drawn in FG geometry points.
Bez rowów i przechyłek (z terenu)
Proflie data without ditches and superelevation. Labels are drawn in EG geometry points.
Bez rowów z przechyłkami (z kilometrażu i niwelety)
Proflie data without ditches with superelevation. Labels are drawn in station intervals and FG geometry points.
Bez rowów z przechyłkami (z kilometrażu)
Proflie data without ditches with superelevation. Labels are drawn in station intervals.
Bez rowów z przechyłkami (z niwelety)
Proflie data without ditches with superelevation. Labels are drawn in FG geometry points.
Bez rowów z przechyłkami (z terenu)
Proflie data without ditches with superelevation. Labels are drawn in EG geometry points.
Kanalizacja deszczowa Storm sewer data
Kanalizacja sanitarna Sanitary sewer data
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 43 of 62 4/26/2011
Przekroje Section data
Z rowami bez przechyłek (z kilometrażu i niwelety)
Proflie data with ditches without superelevation. Labels are drawn in station intervals and FG geometry points.
Z rowami bez przechyłek (z kilometrażu)
Proflie data with ditches without superelevation. Labels are drawn in station intervals.
Z rowami bez przechyłek (z niwelety)
Proflie data with ditches without superelevation. Labels are drawn in FG geometry points.
Z rowami bez przechyłek (z terenu)
Proflie data with ditches without superelevation. Labels are drawn in EG geometry points.
Z rowami i przechyłkami (z kilometrażu i niwelety)
Proflie data with ditches and superelevation. Labels are drawn in station intervals and FG geometry points.
Z rowami i przechyłkami (z kilometrażu)
Proflie data with ditches and superelevation. Labels are drawn in station intervals.
Z rowami i przechyłkami (z niwelety)
Proflie data with ditches and superelevation. Labels are drawn in FG geometry points.
Z rowami i przechyłkami (z terenu)
Proflie data with ditches and superelevation. Labels are drawn in EG geometry points.
Profile Data
Kilometraż
Odległości - kilometraż
Odległości - kilometraż i niweleta
Odległości - niweleta
Odległości - teren istniejący
Różnice rzędnych -
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 44 of 62 4/26/2011
kilometraż
Różnice rzędnych - kilometraż i niweleta
Różnice rzędnych - niweleta
Różnice rzędnych - teren istniejący
Rzędne istniejące - kilometraż
Rzędne istniejące - kilometraż i niweleta
Rzędne istniejące - niweleta
Rzędne istniejące - teren istniejący
Rzędne niwelety - kilometraż
Rzędne niwelety - kilometraż i niweleta
Rzędne niwelety - niweleta
Rzędne niwelety - teren istniejący
Rzędne rowu lewego
Rzędne rowu prawego
Vertical Geometry
Elementy niwelety
Horizontal Geometry
Elementy trasy
Superelevation Data
Pasy zewn bez poboczy
Pasy zewn i wewn bez poboczy
Pasy zewn i wewn z poboczami
Pasy zewn z poboczami
Sectional Data
Przekroje z obliczeniami
Przekroje z odległościami
Pipe Network
Długośd odcinka
Odległośd
Rury i struktury
Rzędna dna kanału
Rzędna terenu
Sieci - Długośd odcinka
Sieci - Odległóśd
Sieci - Rzędna dna kanału
Sieci - Rzędna terenu
Sieci - Spadek
Sieci - Średnica Rury
Sieci - Zagłębienie dna
Spadek - Długośd
Średnica rury
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 45 of 62 4/26/2011
Zagłębienie dna
7.9 Superelevation view
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Superelevation view styles Description Screen grab / DWF / DWG
Standardowy
7.10 Sections
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Sample Line Styles Description Screen grab / DWF / DWG Default
Linie przekrojów drogowych
Sample Line Label Styles Description Screen grab / DWF / DWG Default
Nazwa linii Line name
Nazwa linii i kilometraż Line name and station
Znaki przekroju #-# Section marks
Section Styles Description Screen grab / DWF / DWG Default
Powierzchnie korytarza Corridor surfaces (red)
Teren istniejący EG surface (green)
Section Label Styles Description Screen grab / DWF / DWG Default
Label Sets
Brak etykiet No labels
Etykiety korytarza Corridor labels
Etykiety terenu EG labels
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 46 of 62 4/26/2011
Linie przekroju korytarza Corridor surface lines
Linie przekroju korytarza z wymiarami
Corridor surface lines, dimensions
Linie przekroju terenu EG surface lines
Linie przekroju terenu z wymiarami
EG surface lines, dimensions
Major Offset
Odsunięcie główne Major Offset
Minor Offset
Odsunięcie podrzędne Minor Offset
Grade Break
Linie z przekroju korytarza Corridor surface lines
Linie z przekroju terenu EG surface lines
Przekroje korytarza Corridor surfaces
Przekroje terenu EG surfaces
Segment
Nachylenia segmentów Segment grade
Rzędne pocz segmentów Start segment elevation
Segmenty korytarza Corridor segment
Segmenty terenu EG segment
Wymiary segmentów korytarza Corridor segment dimension
Section View Styles Description Screen grab / DWF / DWG Default
Przekrój drogowy - bez osi
View without vertical axes
Przekrój drogowy - osie pionowe
View with vertical axes
Group Plot Styles
Description Screen grab / DWF / DWG Default
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 47 of 62 4/26/2011
Do rysunku Working layout for model
Do wydruku
Print layout for layout production
Sheet Styles Description Screen grab / DWF / DWG Default
Arkusz A0 Sheet A0
Arkusz A1 Sheet A1
Arkusz A2 Sheet A2
Arkusz A3 Sheet A3
Arkusz A4 Sheet A4
Label Styles Description Screen grab / DWF / DWG
Default
Offset Elevation
Odsunięcie nad rzędną Offset and elevation
Rzędna z kotą Elevation with symbol
Grade
Nachylenie Grade
Różnica rzędnych Elevation difference
Section Band Styles Description Screen grab / DWF / DWG Default
Band Sets
Odsunięcia Offsets
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 48 of 62 4/26/2011
Rzędne i odsunięcia drogi i terenu
Elevations and offsets of road top and EG
Rzędne i odsunięcia drogi odniesienia i terenu
Elevations and offsets of road top, datum and EG
Rzędne i odsunięcia odniesienia i terenu
Elevations and offsets of road datum and EG
Rzędne odsunięcia i różnice drogi i terenu
Elevations, offsets and differences of road and EG
Section Data
Odsunięcie
Różnica
Rzędne drogi
Rzędne odniesienia
Rzędne terenu
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 49 of 62 4/26/2011
Section Table Styles Description Screen grab / DWF / DWG Default
Total Volume
Bilans robót Earthwork table
Material
Raport materiałowy Material table
7.11 Catchment areas
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Style zlewni Opis Ilustracja
Zlewnie 2D Border in 2D
Zlewnie 3D Border in 3D
Style etykiet powierzchni Opis Ilustracja
Nazwa zlewni
Parametry zlewni
Style etykiet segmentów Opis Ilustracja
Numer i typ segmentu
Parametry segmentu
7.12 Pipe Networks
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Parts Lists Description Screen grab / DWF / DWG
Default
Kanalizacja deszczowa Pipes and structures used in storm sewer design
Kanalizacja sanitarna Pipes and structures used in sanitary sewer design
Interference Styles Description Screen grab / DWF / DWG
Default
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 50 of 62 4/26/2011
Podstawowy Basic style of interference
Pipe Styles Description Screen grab / DWF / DWG Default
Linia podwójna Double Line - inside
Linia pojedyncza Single Line - centerline
Niewidoczna na profilu Invisible on profile
Osie Centerline
Osie i ściany Centerline and walls
Przecięcie rur na profilu Cut on profile
Ściany Walls
Pipe Rule Set Description Screen grab / DWF / DWG
Default
Kanalizacja deszczowa Rule set for storm sewer
Kanalizacja sanitarna Rule set for sanitary sewer
Pipe Label Styles Description Screen grab / DWF / DWG Default
Plan Profile
Nazwa Name
Rury na profilu Pipes on profile
Rury na sytuacji Pipes on plan
Rury przecinające na profilu Crossing pipes on profile
Rury wodociągowe Water pipes
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 51 of 62 4/26/2011
Średnica długośd i nachylenie Diameter, length and slope
Crossing Section
Nazwa Name
Rury na przekroju Pipes on section
Średnica długośd i nachylenie Diameter, length and slope
Pipe Table Styles Description Screen grab / DWF / DWG Default
Dane rur Pipes data
Structure Styles Description Screen grab / DWF / DWG
Default
Mur oporowy Retain wall
Niewidoczna na profilu Invisible on profile
Studzienka burzowa Storm manhole
Studzienka kanalizacyjna Sanitary manhole
Wpust uliczny Inlet
Zakooczenie rury Pipe endcap
Structure Rule Styles Description Screen grab / DWF / DWG
Default
Kanalizacja deszczowa Rule set for storm sewer
Kanalizacja sanitarna Rule set for sanitary sewer
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 52 of 62 4/26/2011
Structure Label Styles Description Screen grab / DWF / DWG
Default
Dane i połączone rury Structure data and connected pipes
Nazwa Name
Struktury na profilu Structures on profile
Struktury na przekroju Structures on section
Struktury na sytuacji Structures on plan
Struktury na sytuacji - lewo Structures on plan - left
Struktury na sytuacji - prawo Structures on plan - right
Structure Table Styles Description Screen grab / DWF / DWG Default
Dane struktur Structure data
Współrzęne struktur Structure coordinates
7.13 Corridors
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
Corridor Styles Description Screen grab / DWF / DWG
Default
Podstawowy Basic corridor style
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 53 of 62 4/26/2011
Assembly Styles Description Screen grab / DWF / DWG
Default
Podstawowy Basic assembly style
Mass Haul Line Styles Description Screen grab / DWF / DWG Default
Od punktu załamania From break point
Od punktu zbilansowania From balance point
Mass Haul View Styles Description Screen grab / DWF / DWG Default
Bez siatki Without grid
Siatka przycięta Grid clipped
Quantity Takeoff Criteria Description Screen grab / DWF / DWG
Default
Lista materiałów Material list
Roboty ziemne Total volume
Roboty ziemne - modernizacja Total volume for reconstruction
QTO Table Styles Description Screen grab / DWF / DWG
Total Volume
Bilans robót Total volume table
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 54 of 62 4/26/2011
Tylko objętości Only cuts and fills
Material
Raport materiałowy Material table
7.14 Plan and Profile Sheets
_AutoCAD Civil 3D (Drogi-Sieci)_PL.dwt
View Frame Styles Description Screen grab / DWF / DWG
Default
Standardowy Standard gray frame
View Frame Label Styles Description Screen grab / DWF / DWG Default
Standardowy Standard
Match Line Styles Description Screen grab / DWF / DWG
Default
Standardowy Standard gray line
Match Line Label Styles Description Screen grab / DWF / DWG Default
Match Line Left
Standardowy Standard
Match Line Right
Standardowy Standard
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 55 of 62 4/26/2011
8 Tool palette(s)
8.1 Subassemblies and assemblies
Country kit contains three test palettes. If proposed approach will satisfy customers they will be extended.
1. Zespoły PL – Polish assembles both for intersections and for different classes of roads
2. Pasy ruchu PL – Set of subassemblies LaneOutsideSuper with predefined parameters for different Polish
standards of traffic load
3. Łącza PL – Set of link subassemblies with predefined parameters and codes to work as ditches, benches,
shoulders and so on.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 56 of 62 4/26/2011
4. Narzędzia PL – Set of sample useful tools and blocks.
5. Info PL – Short movies about new styles in DWT file.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 57 of 62 4/26/2011
9 Highway design check files
Design criteria file is used for calculation of minimal radius of alignment curves used in road design. When user
define class of the road and design speed, the design will therefore follow the Polish standard for road design.
With conjunction with design criteria file user shall use design criteria sets that extend Polish standards for
minimum and maximum line length, spiral A value, and FG profile maximum slope.
When user violates one of the design criteria, Civil 3D shows a warning in the drawing for objects that are violated.
The figure below is an example of violating the design criteria.
Design criteria file is also used for calculating superelevation values and transition lengths according to Polish
standards and calculating automatic widening on curves according to Polish standards.
The figure below shows the Polish design criteria.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 58 of 62 4/26/2011
Second file contains standards for creating roundabout geometry with traffic signs and road markings.
Picture shows a sample roundabout created using standards file.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 59 of 62 4/26/2011
10 Quantity Take Off
10.1 Overview of QTO
In Civil 3D 2012 it is possible to create a link between an Pay Item list and Civil 3D objects as well as AutoCAD
objects. The link works on two levels:
1. Settings in the template. Corridor codes, pipes and structures are automatically linked to the pay item
list.
2. Select objects. Select polygon, polylines, lines or feature lines and manually link them to the Pay items.
If objects in the Civil 3D drawing are linked to the pay Item list, then it is possible to run a report that prints areas
and length for objects, that are linked.
Figure below shows a report with summary of Pay Items.
It is possible to summary different types based on count, area or length. The Pay Item can contain a formula that
can multiply the summary with a price. Information from QTO can be shown in reports (CSV, HTML or TXT) or be
exported to use in third part calc. application.
10.2 Creation of QTO
10.2.1 Master Pay Items List
<Pay Item Data\PL\Standard_PL.csv> file is the Pay Item list.
This is an CSV file that can be edited with Microsoft Excel or Notepad. The CSV file contains Pay Items that can be
linked directly to Civil 3D objects or common AutoCAD objects for counting in meters and areas.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 60 of 62 4/26/2011
10.2.2 Pay Items Index
<Pay Item Data\PL\Standard_PL.xml> file is the Pay Item index.
The Pay Items Index file is used to categorize the Master Pay Items file from a flat list to a tree structure. Figure
below shows Polish Pay Item tree structure.
10.2.3 Reports
QTO reports to an HTML style sheets (.XSL) files with the QTO counting from the current drawing. After this is it
possible to change format to CSV, HTML or TXT format.
AUTODESK, INC. Country Kit Workbook
AEC SOLUTIONS
Autodesk and contractor Confidential Page 61 of 62 4/26/2011
11 Superelevation standards
See chapter 9.
Tuckerman Feature Summary
Autodesk Confidential: Need-to-Know
12 Intersection feature – Styles, Names and Assembly sets
Name DWT Value
Intersection Style Standardowy
Intersection Label Style Standardowy
Offset Alignment Style Projekt - odsunięcia
Curb Return Alignment Style Projekt - wyłukowania
Offset Profile Style Projekt - niweleta odsunięcia
Curb Return Profile Style Projekt - niweleta wyłukowania
Offset Alignment Label Set Skrzyżowanie
Curb Return Alignment Label Set Skrzyżowanie
Offset Profile Label Set Standardowy
Curb Return Profile Label Set Standardowy
Intersection Name Format Skrzyżowanie <*Next Counter+>
Intersection Quadrant Name Format Kwadrant <*Położenie kwadrantu+>
Offset Alignment Name Format Krawędź <*Strona+> - <*Wartośd odsunięcia(Um|P3|RN|Sn|OF|AP)+>m - <[Nazwa macierzystej linii trasowania]>
Curb Return Alignment Name Format Wyłukowanie <*Nazwa kwadrantu przecięcia+> - <*Nazwa przecięcia+>
Offset Profile Name Format Niweleta - <[Nazwa linii trasowania]>
Curb Return Profile Name Format Niweleta - <[Nazwa linii trasowania]>
Corridor Region Name Format Region - <*Nazwa zespołu+> - (<[Next Counter]>)