AutoCAD 2015 Network Installation Manual
Index
A.Application for authorization
B.Install Network License Manager(LMTools)
C.Open Firewall
D.Install AutoCAD 2015
A1. Open a command mode : input ipconfig /allCheck : Computer name & Physical address
A2.Send E-Mail to [email protected]
Back Index
B1.Install Tools & Utilities
B2.Install Network License Manager
B3.Selected Network License Manager
B4.Wait for the installation
B5.Successfully installed the selected products
B6.Create Folder name : License
B7.Copy Autodesk-license.lic & Create new text file debug.log
B8.Setting LMTools
B9.Open Config Services
B10.Setting Config Services
1.Service Name: Autodesk 20152.Path to [ C:\Program Files\Autodesk\Autodesk Network License Manager\lmgrd.exe ]3.Path to [ C:\Program Files\Autodesk\Autodesk Network License Manager\License\Autodesk-license.lic ]4.Path to [ C:\Program Files\Autodesk\Autodesk Network License Manager\License\debug.log ]5.Select [Use Services]6.Select [Start Server at Power Up]7.Save Service
B11.Swith to Start/Stop/Reread
1.Stop Server2.ReRead License File3.Start Server
B12.Swith to Server Status
Back Index
C1.Open Control Panel -> Windows Firewall
C2.Open Advanced Settings
C3.Setting Inbound Rules -> New Rule
C5.Specific local ports : 2080, 27000-27009
C6.Allow the connection
C7.All rule apply
C8.Set rule name : Autodesk 2015
C9. Successfully
Back Index
D1.Install AutoCAD 2015
D3.License Type : Network & Serial Number & Product Key
D4.Click to open and configure detail
D5.Selected detail
D6.Click to open and configure detail
D7.Selected detail
D8.Click to Start Install
D9.Wait for the installation
D10.Successfully installed the selected products