AUTO REFKERATOMETER ACCUREF-K 9001 - SHIN-NIPPON
Transcript of AUTO REFKERATOMETER ACCUREF-K 9001 - SHIN-NIPPON
ACCUREF-K9001
A u t o R e f k e r a t o m e t e r
A U T O R E F K E R A T O M E T E R A C C U R E F - K 9 0 0 1
Clear 5.6 inch LCD color monitorLCD color monitor produces superb colorful display of the icons for easier identification to selectyour desired choices for measurement.
Current Measurement Position(blue/blinking)Positions already measured (yellow/illumination)
Increment of Measurement Value
Vertex Distance
Refractive measurement result
Spherical value
Cylindrical value
Axis angle
3 step Monitor angleMonitor angle can be tilted in 3 steps thatallows comfortable operation for both stand-ing and sitting positions.
Wide Measurement RangeWide Measurement Range of Sph -25.00Dto +25.00D, Cyl -10.00D to +10.00D.
2.3 mm Minimum Pupil Diameter& 3 step Target Light AdjusterAllows you to measure much smallerpupils than conventional units and 3 stepTarget Light Adjuster ensures accurateresults.
Menu Screen Setting
Kerato-Peripheral Measurement4 Plots of Cornea can be measured.
IOL Measurement Function
Auto Start FunctionAuto Start Function allows measuring auto-matically when alignment meets measure-ment requirements.
Quick Measurement FunctionQuick Measurement Function realizes 1-10times continuous measurements by pushingthe measurement button once.
Data Screen FunctionMeasured data can be seen on the monitorwithout printing.
Eye Selection Indication
Cylindrical Mark
Keratometry measurement result
Number of Measurement
Radius of Curvature (maximum)
Radius of Curvature (minimum)
Axis Angle
▲ The First Menu Screen ▲ The Second Menu Screen
▲ Measurement Screen
▲ Measurement Screen when IOL mode is set
▲ Kerato-Peripheral Measurement Screen
Data of CornealCenter only
When R/K orKerato measure-ment is also taken,only optimum val-ues are printed.
PeripheralMeasurement
Result
Printout Sample of P.K. Measurement
Vertical EccentricityHorizontal EccentricityAverage of Vertical and Horizontal Eccentricities
Measurement results of IOL measurement mode have "IOL" marks on the left side of each data.
▼ Printout Sample
IOL measurement mode indication
▲ Data Screen (R)
Latest Digital Image Processing Techno
AccurateRe
Choise of the format of printoutFormat of the print out, ALL, ECONO and OFF,can be set on the mode selection.
Power Saving FunctionThe switchover time can be selected on themenu screen.
Quick Printerwith Automatic CutterPrinting paper is automatically cut when it isreleased.
Contact Lens Base Curve MeasurementBase Curve of a hard contact lens can be mea-sured using the contact lens holder.
Near Pupil DistanceMeasurementWhen measurement is taken with thisfunction set, near pupil distance is auto-matically computed to indicate it on thescreen and the printout.
Output TerminalThis terminal outputs an NTSC video terminal.If you connect an external monitor, you canobserve the same image that appears onthe internal monitor screen of ACCUREF-K9001 simulataneously.
RC-232C Setting FunctionWith this function, you can send themeasurement data to an external computerthrough an interface.The data is sent using ASCII CODE.
Sample Print Out when PRINT FORM is set to ECONO
Date and TimeDisplay
Right Eye Data
Optimum Value(Indicated wheneach eye ismeasured morethan three times)
Left Eye Data
Message Area
Refractive Data
KeratometryData
Refractive Data
KeratometryData
Pupil Distance
Sample Print Out when PRINT FORM is set to ALL
logy Offers More
ACCUREF-K 9001Compact, Elegant Design & Light Weight
efractometry & Keratometry
ACCUREF-K 9001AUTO REFKERATOMETERSpecifications
Sph 25 25D (0.12/0.25D step)
Refractive Measuring Range 0yC 10D (0.12/0.25D step)
0sixA 180 (1 step)
Radius of Corneal Curvature 5.0 10 mm (0.01 mm step)
Corneal Refraction 33.75 67.5D
Keratometic Measuring Range 0yC 9D
1sixA 180 (1 step)
Corneal periphery Measurement area 7.5 mm (when radius of curvature is 8mm)
Vertex Distance 0, 10, 12, 13.5, 15 mm
Minimum Pupil Diameter 2.3 mm
PD Measurement Measurement range 85 mm (1 mm step)
Printer Thermal line printer with automatic cutter (paper width 57 mm)
Internal Monitor 5.6 inch LCD monitor (color)
Shifting Range for Sliding Body back/forth 17 mm right/left 43 mm up/down 17 mm
Vertical Adj.Range for Chin Rest 30 mm
Dimensions (W) 240 mm (D) 422 mm (H) 438 mm
Weight approx. 15 kg
Date Output RS-232C interface Video Terminal
Power Source 100 240V 50 / 60Hz
Consumption 80 VA
Power Saving Function OFF, 3, 5, 10 min. (switchable)
Standard AccessoriesModel Eye, Power Code, Printing Paper, Fuse, Chin Rest Paper, Chin Rest Paper Pin, Dust Cover
Parts Identification
IOL Switch
Measurement Mode Selection Switch
Menu Switch
Print Switch
Anti-sliding lock
Head Rest
View Window
Eye Mark
Chin Rest
Output Terminal for External Monitor
External InterfaceConnector
Name Plate
LCD Monitor
Power Indicator
Printer
Body
Base
Measurement Start Switch
Joystick
Power Switch
Fuse Holder
Power PlugConnector