Auto Cate

7/22/2019 Auto Cate

1/67EpksMNg;sIuvilnigsabtkm erobcMedayeFag XIn 1

I. lkNnigEsVgyl;BIAutoCAD1> niymnyAutoCAD KWCakmviFImYyEdleRbIsMrab;KUrbg;GKar sabtkm GKisnI FarasaRs

sMNg;sIuvil nig sMNg;ma:sIunenAelI Computer .rebobnkareRbI AutoCAD manEtmYyKt;.

b:uEnvaGacxusKa bnicbnceTAelIvisynimYy.2>lkNBiessrbs;kmviFI- GacKUrrUbPaB)anlnigc,as;las;- gayRsYlkgkarEkERbblubrUbPaB- cgcaM)anyUrnigrhykgeBlEtmYy- GacbgVilnigeFVIclnarUbPaB)anl- GactMeLIgrUbPaBBitkglMhnigBRgIkbRgm- GaceGaysac;B_N nig Rsemal)any:agc,as;- Gacdak;Material eGayrUbPaBtamkarBit3>karvivtn_nkmviFI- Version 1.0 (Release 1) - December 1982- Version 1.2 (Release 2) - April 1983- Version 1.3 (Release 3) - August 1983

- Version 1.4 (Release 4) - October 1983- Version 2.0 (Release 5) - October 1984- Version 2.1 (Release 6) - May 1985- Version 2.5 (Release 7) - June 1986- Version 2.6 (Release 8) - April 1987- Release 9 - September 1987- Release 10 - October 1988- Release 11 - October 1990- Release 12 - June 1992(last release for Apple Macintosh)- Release 13 - November 1994(last release for Unix, MS-DOSand Windows3.11)

- Release 14 - February 1997- AutoCAD 2000 (R15.0) - March 1999- AutoCAD 2000i (R15.1) - July 2000- AutoCAD 2002 (R15.6) - June 2001- AutoCAD 2004 (R16.0) - March 2003- AutoCAD 2005 (R16.1) - March 2004- AutoCAD 2006 (R16.2) - March 2005- AutoCAD 2007 (R17.0) - March 2006- AutoCAD 2008 (R17.1) - March 2007- AutoCAD 2009 (R17.2) - oct, 30, 2008- AutoCAD 2010 (R8.0) - August, 19, 20094> RbePT Computers EdlGacdMeNIrkarkmviFI an

*. AutoCAD 2010 Ca 2D

7/22/2019 Auto Cate


Microsoft Windows XP Professional or Home edition (SP2 or later)

Intel Pentium 4 or AMD Athlon dual-core processor, 1.6 GHz or higherwith SSE2 technology

2 GB RAM

1 GB free disk space for installation

1,024 x 768 VGA display with true color

Microsoft Internet Explorer 7.0 or later

Install from download, DVD, or CD

*. AutoCAD 2010 Ca 3D Intel Pentium 4 processor or AMD Athlon, 3 GHz or higher; Intel or AMD

dual-core processor, 2 GHz or higher

2 GB RAM or greater

2 GB hard disk space available in addition to free space required forinstallation

1,280 x 1,024 32-bit color video display adapter (true color) 128 MB orgreater, Microsoft Direct3D capable workstation class

5> rebobtMeLIgkmviFI

1. ebIk File AutoCAD BI Drive or CD-ROM

2. Click Files Setup (Setup.exe)

3. Double Click on setup.exe

7/22/2019 Auto Cate


4. Install

5. Installation Product

6. Next

7. Accept

8. Next

9. Next

7/22/2019 Auto Cate


10. Configure

11. Tick Stand alone License -> Next

12. Tick Custom -> Next

13. Configuration Complete

14. Install and Waiting

15. Finish

7/22/2019 Auto Cate


6> karebIk AutoCAD 2010rebobTI1bnab;BI)anbBalkm)anrYcral;enaH Icon rbs; AutoCAD )anelcecjelIpaMgrbs;

WindowsGac Click BIrdgelIAutoCAD2010 rgcaMbnic.

rebobTI2Start -> Programs -> Autodesk -> AutoCAD 2010 -> AutoCAD 2010

7> Command and Coordinate System

7.1. Command:KWCabBaamYyeRbIsMrab;sresrGkSrkat;niggayRsYlkgkareRbIR)as;)anrhssitenAEpkxageRkamnpKUr.

cMNaMCYnkaleKeRbIbBaanig Toolbars RsbeBlCamYyKaedIm,IbegInel,nnkarKUrbg;niggaycgcaM)anyUr.

]TahrN Rectangle mYyGacvayCaCommand: Rec nigRectangle Toolbars

7.2.Coordinate System:KWCaRbBnKl; 0 EdlbegItedayviucTrx nigy kCacMnucsMxan;mYykgkareRbIR)as;bg;kglMhr .Gab;sIs nig Gredaen

Coordinate system EckecjCaBIrRbePTKW Absolute Coordinate:

RKb;cMnucrUbKWeFobeTAnwgKl;O (x=0 , y=0)

Relative Coordinate: RKb;cMnucrUbKWeFobeTAnwgcMnuccugeRkaynKl; 0mannyfa(x=0, y=0) CacMnucfImYyeTot.

7/22/2019 Auto Cate


7.3. karKUreRbIRb vgnigmMeRkABIeRbICoordinate system manviFImYyeTotKWeRbIRbEvgGgt;eFobCamYymMu.

.erobcMe lKUrUnits: KWCaxatmYynbNaRbeTsEdleKniymeRbIR)aserogxn nig gayRsYlkgkar

emIlelIpaMgnkarKUr.

cuc Format menu bars -> UnitsCommand: ddunits

Select Scroll elIDecimal Decimal: CaRbPaK(15.5000) Precision: karkMNt;cMnYnxg;xageRkayTsPaK (0.00) Millimeters: xatRbEvg Engineering: Feet and decimal inches (1- 3.5000)

Architectural: Feet, inches, fractional inches (1- 31/2)

Fractional: Fractional Unit (15 1/2)

Scientific: Notation (1.5500E+01)

Select Scroll elIDecimal Degrees Decimal Degrees Display Partial degrees as decimals (90.00)

0,00,0

50

100 0150 5050 50

15050

50 50

15050

Absolute CoordinateRelative Coordinate

50

7/22/2019 Auto Cate


Deg/Min/Sec Display Partial degree as minutes and seconds of an arc(90d00)

Grads Display Partial degrees as grads (100.0000)

Radians Display Partial degrees as radians (1.5708)

Surveyor Display angles in surveyor units (N)

eRCIserIsDirection

Tick elI East

- Counter Clock wise:pynwigRTnicnaLikar- Clock wise: RsbnwgRTnicnaLikar

9.

kMNt;paMgnkarKUr 11 Limits ( Format ->Drawing Limits) ON / OFF /< Lower Left Conner > < 0.000, 0.000>0,0 Uper Right Conner < 420, 297 >:420,297

cMNaMTMhMRkdaseRbIsBVf A0= 841 x 1189

A1= 841 x 594

A2= 420 x 594

A3= 420 x 297

A4= 210 x 297

A5= 210 x 148

A6= 105 x 14810> TItaMgMouse

Snap eRbIsMrab;cab;bnn Object BImYyeTAmYyEdlmanlkNc,as;las;nigsuRkit.

0: East180: West

90: North

270: South

0,0x

y

A3

420,297

7/22/2019 Auto Cate

8/67

7/22/2019 Auto Cate


Dynamic input: sMrab;bgajRbEvgeBleRbICommand

13> begItkargarfI

eRbIsMrab;begItpaMgkargarfIEdlBMuTak;TgCamYykargarcas;Click File menu bars -> New ->start from scratch -> metric -> okCtrl+N -> start from scratch -> metric -> ok

14> rkSakargar

rkSakargarTukedIm,IbnnaeBleRkayeTotbrkSaCaksarTuksMrab;feRkaynigPstagClick File menu bars -> save -> name files ->saveCtrl+s -> name files.dwg ->save

15> ebIkkargarcas;

ehAkargarcas;mkbneTotbEkERbcMnucxHEdlRtUvpas;br.Click File menu bars -> open ->Directories -> name files -> open

16> ebIk TemplatekarebIkpkargarEdlmanTMrg;Rsab;Click File menu bars -> New ->Acad.dwt -> Open

7/22/2019 Auto Cate


Ctrl+N -> Acad.dwt-> Open

Click File menu bars -> New ->use template -> okCtrl+N -> use Template -> ok

17> ebIk Wizard

karebIkpkargarEdl)ankarkMNt;c,as;las;nigRtwmRtUvClick File menu bars -> New ->use wizard -> advanced setup

-> ok

-> Tick Decimal ->Next

-> Tick Decimal Degrees ->Next

7/22/2019 Auto Cate


-> Tick East ->Next

-> Tick Counter Close wise ->next

-> Tick size paper ->Finish

18> karcakecj

bnab;BI)aneFIVkarbcg;bBab;kickarenaHeKRtUvcakecjBIkm

viFInig biTma:sIunedIm,IrkSarkar)at;bg;bError files.Click File menu bars -> exit &CloseCtrl+Q

19> EsVgyl;BIInterface

TaMgenHCaKniHmYykgkardwgnigyl;nkareRbIR)as;bBaarbs;va.

-

OObbjjeeccttPPrrooppeerrttiieessTToooollbbaarr

SSttaannddaarrddToooollbbaarr

PPuullll--ddoowwnnMMeennuuss

DDrraawwTToooollbbaarr

SSoolliiddeeddiittiinnggToooollbbaarr

GGrraapphhiiccssCCuurrssoorr

GGrraapphhiiccssWWiinnddooww

CCoommmmaannddLLiinnee

CCuurrssoorrCCoooorrddiinnaatteeDDiissppllaayy

7/22/2019 Auto Cate


II. rebobeRbI2D Command1. Command: Mvsetup

eRbIsMrab;kMNt;RbePTRkdasEdlman Scale nigTMhMc,as;las;eTAtambg;.Command: Mvsetup

Initializing...Enable paper space? [No/Yes] : nEnter units type[Scientific/Decimal/Engineering/Architectural/Metric]:mMetric Scales=================(5000) 1:5000(2000) 1:2000(1000) 1:1000(500) 1:500(200) 1:200(100) 1:100(75) 1:75

(50) 1:50(20) 1:20(10) 1:10(5) 1:5(1) FULLEnter the scale factor: 100 Enter the paper width: 210 Enter the paper height: 297

mannyfaeyIgeRbIR)as;RbePTRkdas A4 elImaRtdan 1/100 .2. Command: Line (Draw menu bars -> Line)

eRbIsMrab;;KUrbnat;EdlGgt;nimYyBMu)anCab;KaeT .k> KUrctuekagEkgmYyCommand: L

LINE Specify first point: 50, 60 Specify next point or [Undo]: @100, 0 Specify next point or [Undo]: @0, 50Specify next point or [Close/Undo]: @-100, 0 Specify next point or [Close/Undo]: C CmannyfaeGaybnat;cugeRkayrt;eTArkedImnbnat;vijbbiT Object.

x> KUrbnat;edayeFobnigmMCommand: L

LINE Specify first point: 200,100

Specify next point or [Undo]: @200

7/22/2019 Auto Cate


3. Command: TraceeRbIsMrab;KUrbnat;EdlmankMras;.

Command: traceSpecify trace width :10

Specify start point: click

Specify next point: 100

Specify next point:

4. Command: Poly line(Draw menu bars -> Poly line)

eRbIsMrab;KUr bnat; Fr EdlmankMras;nigGacKUrpas;brBIbnat;eTAExSekagedayGgt;TaMg

Gs;Cab;Ka.k> KUrctuekaNEkgCommand: PLSpecify start point: 500,300Current line-width is 0.0000Specify next point or [Arc/Half width/Length/Undo/Width]: @100, 0Specify next point or [Arc/Close/Half width/Length/Undo/Width]: @0, 50Specify next point or [Arc/Close/Half width/Length/Undo/Width]: @-100, 0Specify next point or [Arc/Close/Half width/Length/Undo/Width]: @0,-50

x> KUrctuekaNEkgmankMras;Command: PLPLINESpecify start point: 200,300Current line-width is 0.0000Specify next point or [Arc/Half width/Length/Undo/Width]: W Specify starting width : 10 Specify ending width : 10 Specify next point or [Arc/Half width/Length/Undo/Width]: @100, 0Specify next point or [Arc/Close/Half width/Length/Undo/Width]: @0, 50Specify next point or [Arc/Close/Half width/Length/Undo/Width]: @-100, 0Specify next point or [Arc/Close/Half width/Length/Undo/Width]: @0,-50

7/22/2019 Auto Cate


K> KUrGkSCommand: Pl

Specify start point: 200,300

Current line-width is : 0.00Specify next point or [Arc/Half width/Length/Undo/Width]: ASpecify endpoint of arc or[Angle/CEnter/Direction/Half width/Line/Radius/Second pt/Undo/Width]:200

Specify endpoint of arc or[Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo/Width]: 200 Specify endpoint of arc or

[Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo/Width]: 200

5. Command: Line type (Format menu bars -> line type)eRbIsMrab;ehAykRbePTbnat;mkeRbItamtMrUvkar .Command:lt

-> Load

-> Right click -> select all -> ok -> ok

viFImYyeToteyIgRKan;EtcucelITools property -> by layer TI2-> other

7/22/2019 Auto Cate


-> Other

-> Load -> Right click -> select all

-> Ok -> ok6. Command: Line type scale

eRbIsMrab;dak;emKuNeGayKMlatnbnat; .Command: lts

LTSCALE Enter new linetype scale factor : 20emKuNRegenerating model.

7. Command: Color(Format menu bars -> color)

eRbIsMrab;dak;BNeGaybnat;nig ObjectepSgeTot .Command: color

viFImYyeToteyIgRKan;EtcucelITools property -> by layer TI1-> Color

8. Command: Line weight (Format menu bars ->line weight)eRbIsMrab;dak;kMras;eGaybnat;nig ObjectepSgeTot .Command: lw

7/22/2019 Auto Cate


viFImYyeToteyIgRKan;EtcucelITools property -> by layer TI3-> line weight

9. Command: Copy clip (Edit menu bars -> copy) (Ctrl+c)

eRbIsMrab;ftcMlgrUbBI FilesmYyeTA FilesmYyeTot .Command: copy clip

Select objects: click objectSelect objects: Right click

10. Command: Paste (Edit menu bars -> paste) (Ctrl+v)

eRbIsMrab;yk ObjectEdl)anftcMlgehIy .Command:pasteclip

Specify insertion point:Click TItaMgEdlTuk11. Command: Cut (Edit menu bars -> Cut) (Ctrl+x)

eRbIsMrab;ftcMlg Object edayObjectcas;KW)anlubecal.Command: cutclip

Select objects: click objectSelect objects: Right click

12. Command: Close (Files menu bars -> Close) (Ctrl+F4)

eRbIsMrab;biT object.Command: Close

13. Command: Exit (Files menu bars -> exit) (Alt+F4)

eRbIsMrab;cakecjBIkm

viFI.Command: exit

14. Command: BlipModeeRbIsMrab;biTebIksBaabUkeBlkMBugKUrCommand: blipmode

Enter mode [ON/OFF] : ON

7/22/2019 Auto Cate


15. Command: Redraw (View menu bars -> Redraw)eRbIsMrab;sMGatpScreen

Command: redraw16. Command: Regen, Regen all (View menu bars -> Regen, Regen all)

eRbIsMrab;karBRgIkbRgmrUbnig eFVIeGayExSekagmanragmUlvijCommand: Regenall17. Command: Erase (Modify menu bars -> Erase)

eRbIsMrab;lub Objectecal .Command: E

Select objects: Click objectSelect objects: Right Click

kar Select objectmanBIrrebobKW- TI1karSelect BIeqVgeTAsaM

Select enHKWSelect edaykat;TaMgGs;eTIbGaclub)anTaMgGs;- TI2 karSelect BIsaMeTAeqVg

Select enHKWSelect RKan;Etkat;EpkmYyn Object KWlub)anTaMgGs;18. Command: Lengthen (Modify menu bars -> lengthen)

eRbIsMrab;bEnm bny srub nigkat;;bnat;rW ExSekag CaPaKry.karbEnmbnat;Command: Len

LENGTHENSelect an object or [DElta/Percent/Total/DYnamic]: DE Enter delta length or [Angle] : 100 Select an object to change or [Undo]: Click Object (Add Line)Select an object to change or [Undo]: Right Click(Continue or Finish)

karbEnmExSekagCommand: Len

LENGTHENSelect an object or [DElta/Percent/Total/DYnamic]: De

Enter delta length or [Angle] : A

Enter delta angle : 30 Select an object to change or [Undo]: Click ObjectSelect an object to change or [Undo]: Right Click

7/22/2019 Auto Cate


kat;bnyCaPaKryCommand: len

LENGTHENSelect an object or [DElta/Percent/Total/DYnamic]: P Enter percentage length : 50 Select an object to change or [Undo]:Click ObjectSelect an object to change or [Undo]:Right Clicksrub

Command: lenLENGTHENSelect an object or [DElta/Percent/Total/DYnamic]: TSpecify total length or [Angle] : 1000Select an object to change or [Undo]:Click ObjectSelect an object to change or [Undo]:Right ClickkarbEnmnigbnytamcit

Command: lenLENGTHENSelect an object or [DElta/Percent/Total/DYnamic]: DY Select an object to change or [Undo]: Click Object

Specify new end point: 100 RbEvgbEnm19. Command: Donut (Draw menu bars -> donut)

eRbIsMrab;KUrrgVg;Edlmanpnigkg;Lan.Command: do

DONUTSpecify inside diameter of donut : 0Specify outside diameter of donut : 20 Specify center of donut or : Click PointSpecify center of donut or : Right Click

20. Command: Fill (Tools menu bars-> option -> Apply solid fill)eRbIsMrab;dak;nigbiTprbs; Donutb Hatch.

Command: fillEnter mode [ON/OFF] : OFF

Automatic save to enHCakEngTukOn:ebIkOff:biT

7/22/2019 Auto Cate


Not: used Command: Re21.Command: Offset(Modify menu bars -> Offset)

eRbIsMrab;ftcMlg object edaykMNt;RbEvgc,as;las;.Command: o

OFFSETCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] : 100

Select object to offset or [Exit/Undo] : Click ObjectSpecify point on side to offset or [Exit/Multiple/Undo] : ClickSelect object to offset or [Exit/Undo] :

-Exit: ecjBICommand

-Multiple: ftcMlgcMnYneRcIn

22.Command: MOVE (Modify menu bars -> Move)eRbIsMrab;pas;brTItaMgrbs;Object .Command: M

MOVESelect objects: Specify opposite corner: Click objectSelect objects:Right ClickSpecify base point or [Displacement] : Click

Specify second point or: Click

23.Command: Zoom (View menu -> Zoom)eRbIsMrab;BRgIkbRgYm Object.k>ZoomenAkgScreen EtmYy

Command: ZZOOMSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window]: Ax>ZoomcMnuckNaln Screen

Command: Z

ZOOMSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window]: C

7/22/2019 Auto Cate


Specify center point:ClickEnter magnification or height : ClickSpecify second point: Click

K> BRgIkrUbPaBeGayeBjScreenCommand: Z

ZOOMSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/ Dynamic/ Extents/ Previous/ Scale/ Window] : E

X> Rtlb;mkeRkayvijCommand: Z ZOOMSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window]: Pg> kareRbIemKuN

Command: ZZOOMSpecify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window]: S Enter a scale factor (nX or nXP): 2 xpc> bgajCalkN Window

Command: Z ZOOMSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window]: WSpecify first corner: 20

Specify opposite corner: 50

q> karBRgIkbRgYm

(+) sMrab;BRgIk Object(-) sMrab;BRgYm ObjectC> Exit

7/22/2019 Auto Cate


23.Command: Object Snap (Tools menu bars -> Drafting Settings)eRbIsMrab;kMNt;cMnuccab;rbs;ObjectCommand: Os

- Temporary Tracking point: eRbIsMrab;cab;cMnucbnrbs;Object

- Snap From:eRbIsMrab;cab;cMnuceFobnigGkS x, y

- End Point:eRbIsMrab;cab;cMnuccugrbs;Object

- Midpoint:eRbIsMrab;cab;cMnuckNalrbs;;Object

- Intersection:eRbIsMrab;cab;cMnucRbsBVrbs;;Object

- Apparent Intersection:eRbIsMrab;cab;cMnuckat;Karbs;;Object

- Extension: eRbIsMrab;cab;cMnucmYyedaykMNt;RbEvgc,as;las;

- Center: eRbIsMrab;cab;cMnucpitrgVg;

- Quadrant:eRbIsMrab;cab;cMnucrgVg;EckCabYn

- Tangent:eRbIsMrab;cab;cMnucb:HrgVg;

- Perpendicular:eRbIsMrab;cab;cMnucEkg

7/22/2019 Auto Cate


-Nod:eRbIsMrab;cab;cMnucrbs;Point

-Insert: eRbIsMrab;cab;cMnuc Block

-Nearest:eRbIsMrab;cab;cMnucCitbMput

-Parallel: eRbIsMrab;;cMnucRsb

24.Command: Rectangle(Draw menu bars -> Rectangle)eRbIsMrab;KUrctuekaNEkg.k> KUrctuekaNEkgFmta

Command: RECRECTANGLESpecify first corner point or[Chamfer/Elevation/Fillet/Thickness/Width]: Click PointSpecify other corner point or [Dimensions]: Click Point

x> KUrctuekaNEkgEdlRcitRCugCommand: REC

RECTANGLECurrent rectangle modes: Chamfer=10.0000 x 30.0000Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: C Specify first chamfer distance for rectangles :10 Specify second chamfer distance for rectangles : 20Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Click PontSpecify other corner point or [Dimensions]: Click Pont

K> KUrctuekaNEkgEdlmanRCugmUlCommand: REC

RECTANGLECurrent rectangle modes: Chamfer=10.0000 x 10.0000Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: F

7/22/2019 Auto Cate


Specify fillet radius for rectangles : 20;Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Click PointSpecify other corner point or [Dimensions]: Click Point

X> KUrctuekaNEkgEdlmankMras;Command: REC

RECTANGLECurrent rectangle modes: Width=2.0000Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: WSpecify line width for rectangles : 10

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Click PointSpecify other corner point or [Dimensions]: Click Point

25.Command: Circle (Draw Menu bars -> Circle)eRbIsMrab;KUrrgVg;.

k> KUrrgVg;cab;epmBIptCommand: C

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan

radius)]: ClickcMnucTI1Specify radius of circle or [Diameter]: ClickcMnucTI2

x> karKUredayeRbIBIrcMnuceKGacykcMnucBIr CaCMnYyedIm,IKYrrgVg;ehIycMnucenaHGacCa cugbnat;rWCacMnucdTeTotk_)an.

Command: CCIRCLE Specify center point for circle or [3P/2P/Ttr (tan tanradius)]: 2Specify first end point of circle's diameter: Click pointSpecify second end point of circle's diameter: Click point

7/22/2019 Auto Cate


K> KUrrgVg;edayeRbIbIcMnucCommand: C

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tanradius)]: 3pSpecify first point on circle: Click pointSpecify second point on circle: Click pointSpecify third point on circle:Click point

X> KUrrgVg;edayb:HBIrcMnucnigkaMrgVg;Command: C

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tanradius)]: Ttr

Specify point on object for first tangent of circle: Click b:HTI1Specify point on object for second tangent of circle: Click b:HTI2Specify radius of circle : 50

g> KUrrgVg;edayb:HbIcMnucDraw Menu->Circle->Tan Tan Tan

Command: _circle Specify center point for circle or [3P/2P/Ttr (tantan radius)]: _3p Specify first point on circle: Click Objectb:HcMnucTI1Specify second point on circle: Click object b:HcMnucTI2Specify third point on circle: Click Object b:HcMnucTI3

26.Command: Arc (Draw Menu bar - > Arc)

7/22/2019 Auto Cate


eRbIsMrab;KUrExSekag .k> KUrGgt;FredayeRbIbIcMnucCommand: arc

Specify start point of arc or [Center]: Click cMnucTI1Specify second point of arc or [Center/End]: Click cMnucTI2Specify end point of arc: Click cMnucTI3x> KUrGgt;FredayeRbIcMnuckNalnigmMbgVl

Command: arcSpecify start point of arc or [Center]: cSpecify center point of arc: click pointSpecify start point of arc:click pointSpecify end point of arc or [Angle/chord Length]: ASpecify included angle: 180X> KUrGgt;FredayeRbIBIrcMnucnigkaM

Command: _arc Specify start point of arc or [Center]: Click PointSpecify second point of arc or [Center/End]: _eSpecify end point of arc: Click PointSpecify center point of arc or [Angle/Direction/Radius]: _r Specify radiusof arc: 60

- 3 Point KWCakarKUrFredaydwg3cMnuc- Start, Center, EndKWCakarKUrFredaydwgcMnuccab;epIm kNalnigbBab;- Start, Center, Angle KWCakarKUrFredaydwgcMnuccab;epIm kNalnigmMu

- Start, Center, LengthKWCakarKUrFredaydwgcMnuccab;epIm kNalnigRbEvg- Start, End, AngleKWCakarKUrFredaydwgcMnuccab;epIm bBab;nigmMu

7/22/2019 Auto Cate


- Start, End, DirectionKWCakarKUrFredaydwgcMnuccab;epIm bBab;nigmMueFob- Start, End, RadiusKWCakarKUrFredaydwgcMnuccab;epIm bBab;nigkaMrgVg;- Center, Start, EndKWCakarKUrFredaydwgcMnuckNal cMnuccab;epIm nigbBab;- Center, Start, AngleKWCakarKUrFredaydwgcMnuckNal cMnuccab;epIm nigmMu- Center, Start, LengthKWCakarKUrFredaydwgcMnuckNal cMnuccab;epImnigRbEvg- Continuebn

27.Command: Point (Draw Menu bars -> Point)eRbIsMrab;KUrcMnucBugehIyTMhMxusKatamkarkMNt;TukCamun.

Command: pointCurrent point modes: PDMODE=0 PDSIZE=0.0000Specify a point: Click Point

28.Point style (Format Menu bars -> Point)eRbIsMrab;kMNt;RbePTrbs;Point EdleyIgcg;)an.

Command: ddptype

RbsinebIeyIgcg;)an Style NamYyRtUveRbI Left Mouse cuceGaycM Point EdleyIgcg;)an .

29.Command: Polygon (Draw Menu bars -> Polygon)eRbI;sMrab;KUrBhuekaN. cMnYnRCugeRcInbMputKW1024.

k> KUrBhuekaNcarikkgrgVg;

7/22/2019 Auto Cate


Command: polPOLYGON Enter number of sides : 6 Specify center of polygon or [Edge]: Click PointEnter an option [Inscribed in circle/Circumscribed about circle]: ISpecify radius of circle: 60

x> KUrBhuekaNcarikeRkArgVg;Command: Pol

POLYGON Enter number of sides : 6 Specify center of polygon or [Edge]: Click PointEnter an option [Inscribed in circle/Circumscribed about circle]: cSpecify radius of circle: 70

K> KUrBhuekaNedayeRbIRbEvgRCugCommand: pol

Enter number of sides : 8Specify center of polygon or [Edge]: e Specify first endpoint of edge: Click PointSpecify second endpoint of edge: 100

30.Command: Construction Line (Draw Menu bars -> Construction Line)eRbIsMrab;KUrbnat;KanEdnkMNt;.k> KUrbnat;edayeRbIBIrcMnuc

Command: xlineSpecify a point or [Hor/Ver/Ang/Bisect/Offset]: Click PointSpecify through point: Click Point

7/22/2019 Auto Cate


x> KUrbnat;CaGab;sIsCommand: xline

Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V Specify through point:

K> KUrbnat;CaGredaenCommand: xline

Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V Specify through point: Click Point

X> KUrbnat;CamMCommand: xline

Specify a point or [Hor/Ver/Ang/Bisect/Offset]: a Enter angle of xline (0) or [Reference]: 45 Specify through point: Click point

g> KUrbnat;eFobmMCommand: xl

XLINE Specify a point or [Hor/Ver/Ang/Bisect/Offset]: bSpecify angle vertex point: 45Specify angle start point: 45Specify angle end point: 45Specify angle end point: Click Point

Specify angle end point:

31.Command: Ray (Draw Menu bars -> Ray)

eRbIsMrab;KUrbnat;EdlmanEdnkMNt;Bak;kNal.Command: ray Specify start point: Click PointSpecify through point: Click Point

7/22/2019 Auto Cate


32.Command: Multi line (Draw Menu bars ->Multiline)

eRbIsMrab;KUrbnat;eRcIn.

k> KUrbnat;eRcInedaykMNt;TMhMCommand: ml

MLINE

Current settings: Justification = Top, Scale = 200.00, Style =STANDARDSpecify start point or [Justification/Scale/STyle]: s Enter mline scale : 200Current settings: Justification = Top, Scale = 200.00, Style =STANDARDSpecify start point or [Justification/Scale/STyle]: Click PointSpecify next point: Click PointSpecify next point or [Undo]: x> KUrbnat;eRcInedayeRbIxagelI

Command: MLCurrent settings: Justification= Top, Scale = 20.00, Style =STANDARDSpecify start point or [Justification/Scale/STyle]: s Enter mline scale : 200 Current settings: Justification = Top, Scale = 200.00, Style =STANDARDSpecify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] : T

Current settings: Justification = Top, Scale = 200.00, Style =STANDARDSpecify start point or [Justification/Scale/STyle]: Click PointSpecify next point: Click PointSpecify next point or [Undo]: EnterK> KUrbnat;eRcInedayeRbIxageRkam

Command: mlMLINECurrent settings: Justification = Top, Scale = 200.00, Style =STANDARD

Specify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] : bCurrent settings: Justification = Bottom, Scale = 200.00, Style =STANDARD

7/22/2019 Auto Cate


Specify start point or [Justification/Scale/STyle]: Click PointSpecify next point: Click PointX> KUrbnat;eRcInedayeRbIkNal

Command: ml MLINECurrent settings: Justification = Bottom, Scale = 200.00, Style =

STANDARDSpecify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] : z Current settings: Justification = Zero, Scale = 200.00, Style =STANDARDSpecify start point or [Justification/Scale/STyle]: Click PointSpecify next point: Click PointSpecify next point or [Undo]: Enterg> karkMNt;kgMenu bars

-

Set

Current:

sMrab;kMNt;eQ

aHcugeRkay

- Name: sMrab;dak;eQaHfI- Modify: sMrab;EkERb- Rename: breQaH- Delete: sMrab;lub-Description: sMrab;erobrab;- Save:

rkSaTuk

- Add: sMrab;bEnmbnat;-OK, Cancel- Delete sMrab;lub

7/22/2019 Auto Cate


- Offset sMrab;kMNt;KMlat- Color dak;BNbnat;- Line type sMrab;kMNt;RbePTbnat;.

33. Command: Sketch

eRbIsMrab;KUrxVasbKUrK

aneRBognigxatRtwmRtUveLIy.Command: SketchRecord increment : 0.5Sketch. Pen eXit Quit Record Erase Connect. *Cancel*

34. Command: Copy (Modify Menu bars -> Copy)

eRbIsMrab;ftcMlg Object.k>Single CopyCommand: Co

COPYSelect objects: Click ObjectSelect objects: Right ClickSpecify base point or displacement, or [Multiple]: Click ObjectSpecify second point Of displacement or : Click Object;

x>Multi CopyCommand: Co

COPYSelect objects: Click ObjectSelect objects:Click ObjectSpecify base point or displacement, or [Multiple]: MSpecify base point: Click ObjectSpecify second point of displacement or : Click ObjectSpecify second point of displacement or : Click ObjectSpecify second point of displacement or

first point as displacement>:Click ObjectSpecify second point of displacement or:Click Object

7/22/2019 Auto Cate


35. Command: Array (Modify Menu bars -> array)eRbIIsMrab;ftcMlg Object EdlmanlkNCaCYr CargVg;nigmMutamkarkMNt;RbEvgCamun.k> ftcMlgCa Rectangular array

ftcMlgCaCYrmanbIrKWCYredk(Rows)CYrQr (Columns)

mMu (Angle)

- Select ObjectssMrab;Click rUb- Rows cMnYnCYredk- Columns cMnYnCYrQr- Rows Offset RbEvgKMlatBIRow mYyeTARow mYy- Column Offset RbEvgKMlatBIColumn mYyeTAColumn mYy

- Angle of array bgVilObject tammuMkMNt;x> ftcMlgCargVg;

7/22/2019 Auto Cate


eRbIsMrab;ftcMlgObjecttamlkNCargVg;nigcMnYnEdl)ankMNt;.

- Center point:cMnucpwtEdlRtUvbgVil- Select object: Click rUb- Total number of items: cMnYn Object EdlcMlg- Angle to fill:cMnYnmMubgVil- Ok: yl;RBm

36. Command: Mirror (Modify Menu bars -> Mirror)

eRbIsMrab;qH ObjectedaymancMnucGkSeFobmYyCaeKal.Command: miMIRRORSelect objects: Click ObjectSelect objects: Right ClickSpecify first point of mirror line: Click PointSpecify second point of mirror line:Click PointErase source objects? [Yes/No] : Enter

37. Command: Rotate (Modify Menu bars ->Rotate)eRbIsMrab;bgVilObject .k> kareRbImM

7/22/2019 Auto Cate


Command: RoROTATESelect objects: Click ObjectSelect objects: Right ClickSpecify base point: Click objectSpecify rotation angle or [Reference]: 45

x> kareRbI ReferenceCommand: Ro

ROTATECurrent positive angle in UCS: ANGDIR=counter clock wiseANGBASE=0Select objects: Click ObjectSelect objects: Right ClickSpecify base point: Click PointSpecify rotation angle or [Copy/Reference] : r Specify the reference angle : 0Specify the new angle or [Points] : 60

38. Command: Extend (Modify Menu bars -> Extend)

eRbIsMrab;Bntbnat;eTAtamkarkMNt;.mandUcCa Command: Line, Poly line, Arc l.k> BntmgmYyCommand: Ex

Select objects: Click ObjectSelect objects: Right ClickSelect object to extend or shift-select to trim or [Project/Edge/Undo]: Click Object

x> BntmgeRcInCommand: Ex

Select objects: Click ObjectSelect object to extend or shift-select to trim or [Project/Edge/Undo]: FFirst fence point: Click Object

Specify endpoint of line or [Undo]: Click ObjectSpecify endpoint of line or [Undo]: Click ObjectSelect object to extend or shift - select to trim or [Project/Edge/Undo]: Enter

7/22/2019 Auto Cate


39. Command: Trim (Modify Menu bars -> Trim)eRbIsMrab;kat;ObjecteGay)anes

IredayeFobeTAnigbnat;eKalNamYy.k> Trim mgmYy

Command: TrSelect objects: Click ObjectSelect objects:Right ClickSelect object to trim or shift - select to extend or [Project/ Edge/Undo]: Click ObjectSelect object to trim or shift - select to extend or [Project/Edge/Undo]: Click ObjectSelect object to trim or shift - select to extend or [Project/Edge/Undo]: Enter

x> Trim mgeRcInCommand: Tr

Select objects: Click ObjectSelect object to trim or shift - select to extend or [Project/Edge/Undo]: FSpecify endpoint of line or [Undo]: Click ObjectSpecify endpoint of line or [Undo]: Click ObjectSpecify endpoint of line or [Undo]: Click ObjectSpecify endpoint of line or [Undo]: Click Object

Select object to trim or shift - select to extend or [Project/Edge/Undo]: Enter

40. Command: Fillet(Modify Menu bar -> Fillet)

eRbIsMrab;eFVIeGayRCugmanragmUlehIyRCugrbs;vaGacCa Line, Poly Line l.

7/22/2019 Auto Cate


k>karkMNt;kaMCommand: F

FILLETCurrent settings: Mode = TRIM, Radius = 0.0000Select first object or [Poly line /Radius/Trim/mUltiple]: R Specify fillet radius : 6Select first object or [Poly line/Radius/Trim/mUltiple]: ClickObjectSelect second object: Click Object

x> Ca Poly lineCommand: FFILLETCurrent settings: Mode = TRIM, Radius = 0.0000Select first object or [Undo/Poly line/Radius/Trim/Multiple]: R Specify fillet radius : 5Select first object or [Undo/Poly line/Radius/Trim/Multiple]: P Select 2D poly line: Click Object4 lines were filleted

K> CacMnYneRcInCommand: F

FILLETCurrent settings: Mode = TRIM, Radius = 5.0000Select first object or [Undo/Polyline/Radius/Trim/Multiple]: RSpecify fillet radius : 20Select first object or [Undo/Polyline/Radius/Trim/Multiple]: mSelect first object or [Undo/Polyline/Radius/Trim/Multiple]: ClickSelect second object or shift-select to apply corner:Click ObjectSelect first object or [Undo/Polyline/Radius/Trim/Multiple]:ClickSelect second object or shift-select to apply corner:Click ObjectSelect first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter

7/22/2019 Auto Cate


41. Command: Chamfer (Modify Menu bars -> Chamfer)

eRbIsMrab;RcibRCugn Object Edl)ankMNt;c,as;las;.k> karkMNt;RbEvgCommand: Cha

CHAMFER(TRIM mode) Current chamfer Dist1 = 0.0000, Dist2 = 0.0000Select first line or [Poly line /Distance/Angle/Trim/Method/mUltiple]: DSpecify first chamfer distance : 1000Specify second chamfer distance : 1000Select first line or [Poly line/Distance/Angle/Trim/Method/mUltiple]: Click ObjectSelect second line: Click Object

x> karkMNt;mMCommand: Cha

CHAMFER(TRIM mode) Current chamfer Dist1 = 4.0000, Dist2 = 3.0000Select first line or [Poly line/Distance/Angle/Trim/Method/mUltiple]: A Specify chamfer length on the first line : 1000Specify chamfer angle from the first line : 45Select first line or [Poly line/Distance/Angle/Trim/Method/mUltiple]: Click ObjectSelect second line: Click Object

K> Ca Poly lineCommand: CHA

CHAMFER(TRIM mode) Current chamfer Dist1 = 20.0000, Dist2 = 20.0000Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: DSpecify first chamfer distance : 1000Specify second chamfer distance : 1000Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: p

Select 2D poly line: Click Object4 lines were chamfered

X> karRcitmgcMnYneRcIn

7/22/2019 Auto Cate


Command: ChaCHAMFER(TRIM mode) Current chamfer Dist1 = 20.0000, Dist2 = 20.0000Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: ASpecify chamfer length on the first line : 1000Specify chamfer angle from the first line : 45

Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: mSelect first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: Click ObjectSelect second line or shift-select to apply corner:Click ObjectSelect first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]:Click ObjectSelect second line or shift-select to apply corner:Click ObjectSelect first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: enter

42. Command: Explode (Modify Menu bars -> Explode)

eRbIsMrab;bMEbkObject eGayeTACaSegmentstUc. Object EdlGac bMEbk)andUcCaBlock, Region, Poly line.

Command: X

EXPLODESelect objects: Click PointSelect objects: Right Click

43. Command: Scale (Modify Menu bars -> Scale)eRbIsMrab;BRgIknigbRgYmObjectedayeRbIemKuNnigeRbITMhMeFob.k> karkMNt;emKuN

Command: ScSCALESelect objects: Click ObjectSelect objects: Right ClickSpecify base point: Click PointSpecify scale factor or [Reference]: 100

7/22/2019 Auto Cate


x> karkMNt;emKuNCommand: Sc

SCALESelect objects: Click ObjectSelect objects: Right ClickSpecify base point: Click PointSpecify scale factor or [Reference]: R

Specify reference length : 1000

Specify new length or [Points] : 500044. Command: Divide (Draw Menu bars -> Point -> Divide)

eRbIsMrab;edAcMnuc rWEckcMnucenAelIObject .k> EckCacMnucdMbUgeyIgRtUveRCIserIsPoint Style Camunsin .Command: Div

DIVIDE

Select object to divide: Click ObjectEnter the number of segments or [Block]: 4

x> EckCacMnYnEdl anbegtTukdMbUgeyIgRtUvbegIt Block mYyEdleyIgcg;eRbICamYy Divide CamunsineTIbeKeRbIDivide Command )an.

Command: DivDIVIDESelect object to divide: Click ObjectEnter the number of segments or [Block]: B Enter name of block to insert: khin Align block with object? [Yes/No] : Y

Enter the number of segments: 4

K> karEckedayminbgVCommand: Div

DIVIDESelect object to divide: Click ObjectEnter the number of segments or [Block]: BEnter name of block to insert: khin

7/22/2019 Auto Cate


Align block with object? [Yes/No] : NEnter the number of segments: 10

45. Command: Measure (Draw Menu bars -> Point -> Measure)

eRbIsMrab;EckRbEvgGgt;EdlenAelI Object .k> EckCacMnucCommand: MeSelect object to measure: Click ObjectSpecify length of segment or [Block]: 100

x> EckCacMnYnEdl anbegtTukCommand: Me

MEASURE

Select object to measure: Click ObjectSpecify length of segment or [Block]: BEnter name of block to insert: khin Align block with object? [Yes/No] : YSpecify length of segment: 100

46. Command: Units(Format Menu bars -> Units)

eRbIsMrab;kMNt;xatkgeBlKUr. xatkugRsukEx

reKyk Decimal nigTisedAmMu eKykDecimal Degrees.

Command: units

RsbRTnicnaLi

7/22/2019 Auto Cate


47. Command: Boundary(Draw Menu bars -> Boundary)

eRbIsMrab;begIt Object eGaymanpnigsac;.

Command: BoBOUNDARY

Select internal point: Selecting everything...Selecting everything visible...Analyzing the selected data...Analyzing internal islands...Select internal point: Click Center PointBOUNDARY created 1 poly line

begItehIyRtUveRbICommand: Move edIm,IykrUbecj

48. Command: Area(Tools Menu bars -> Inquiry -> Area)

eRbIsMrab;KitRkLapnigbrimaNrbs; Object .k> KNnaRkLapCommand: aa

AREASpecify first corner point or [Object/Add/Subtract]: O Select objects: Click ObjectArea = 100, Perimeter = 40

7/22/2019 Auto Cate


x> KNnaRkLapbEnmCommand: aa

AREASpecify first corner point or [Object/Add/Subtract]: a Specify first corner point or [Object/Subtract]: o (ADD mode)Select objects: Click Object Area = 2500.0000, Perimeter = 200.0000

Total area = 2500.0000(ADD mode) Select objects: Click objectArea = 1600.0000, Perimeter = 160.0000Total area = 4100.0000(ADD mode) Select objects:Specify first corner point or [Object/Subtract]:

K> KNnaRkLapbnyCommand: aa

AREASpecify first corner point or [Object/Add/Subtract]: s Specify first corner point or [Object/Add]: aSpecify first corner point or [Object/Subtract]:o(ADD mode) Select objects: ClickObjectArea = 2500.0000, Perimeter = 200.0000Total area = 2500.0000(ADD mode) Select objects: Right Click

Specify first corner point or [Object/Subtract]: sSpecify first corner point or [Object/Add]: o(SUBTRACT mode) Select objects: Click ObjectArea = 1600.0000, Perimeter = 160.0000Total area = 900.0000(SUBTRACT mode) Select objects:Specify first corner point or [Object/Add]: Enter

TI1 TI2

7/22/2019 Auto Cate


49. Command: ID Point(Tools Menu bars -> Inquiry -> ID Point)

mantYnaTIsMrab;rk Coordinate rbs;Object mYyenAelIscreen .Command: id

Specify point: Click ObjectX = 100 Y = 200 Z = 0.00

50. Command: List(Tool Menu bars -> Inquiry ->List)

eRbIsMrab;bgajlkNrbs;Object nImYyGacCabnat; CaRkLapmYynigepSgeTot.k> sMrab;bnat;Command:li

LISTSelect objects:Click ObjectSelect objects: Right Click

LINE Layer: "0"Space: Model spaceHandle = 89From point, X= 8.7301 Y= 20.7121 Z= 0.0000To point, X= 32.2874 Y= 20.7121 Z= 0.0000Length = 23.5574, Angle in XY Plane = 0Delta X = 23.5574, Delta Y = 0.0000, Delta Z = 0.0000

x>ctuekaNEkgCommand:li

LISTSelect objects: Click ObjectSelect objects: Right Click

TI1 TI2

Line

7/22/2019 Auto Cate


LWPOLYLINE Layer: "0"Space: Model spaceHandle = 8AClosedConstant width 0.0000Area 5000.0000

Perimeter 300.0000

At point X= 9.6621 Y= 12.5338 Z= 0.0000At point X= 109.6621 Y= 12.5338 Z= 0.0000At point X= 109.6621 Y= 62.5338 Z= 0.0000At point X= 9.6621 Y= 62.5338 Z= 0.0000

51. Command: Text Style(Format menu bars -> Text Style)

eRbIsMrab;kMNt; RbePT TMhM GkSr.karkMNt;GkSrmansarsMxan;kgkarsresr)aneRcInRbePTenAkgrUbEtmYy. dUcCakarkMNt;GkSrsMrab; elx Code kMNt; RbePTGkSrsMrab;sresrcMNgeCIgepSg l.kgrUbeKGacsresrCaGkSrExrnigGkSr Englishk)an .

Command: St

Font Name: sMrab;eRCIserIsyk Style rbs; Font ehIybnab;mkeRCIserIsykkMBs;GkSrRtg;kEng Height . edIm,IkMNt;kMBs;GkSrRtUvKitGMBIScale EdlRtUvKUr.

- KUr Scale 1:1 dak;kMBs;GkSr 3 mannyfa 3mm*1=3- KUr Scale 1:10 dak;kMBs;GkSr 3 mannyfa 3mm*10=30- KUr Scale 1:20 dak;kMBs;GkSr 3 mannyfa 3mm*20=60- KUr Scale 1:50 dak;kMBs;GkSr 3 mannyfa 3mm*50=150

- KUr Scale 1:100 dak;kMBs;GkSr 3 mannyfa 3mm*100=300- KUr Scale 1:200 dak;kMBs;GkSr 3 mannyfa 3mm*200=600

Select Object

7/22/2019 Auto Cate


- KUr Scale 1:500 dak;kMBs;GkSr 3 mannyfa 3mm*500=1500eRkayBIeGaykMBs;GkSrrYcRtUveGayeQaHmYyeday Click eTAelIGkSr New EdlsitenAkg tMbn;Style Name .eRkayBI Click elINew eK)anrUbdUcxageRkam

52. Command: DTEXT(Draw Menu bars -> Text -> Single Line Text)

DTEXT mkBIBak Dynamic Text KWeRbIsMrab;sresr Text EdlmancMnYnGkSrticdYcCasresrcMNgeCIgrbs;bg;.eKGacbegIt Text style eRcInRbsineKcg;eRbI Text style

NamYyenaHeKRtUvActivate Text style

enaHCamunsin. cUleTAtaragText style

ehIyykeQ

aHText style dak;elxeGayecjmkenAkng Style Name rYceRbI Command: Dtext CaeRsc.

Command: dtTEXTCurrent text style: "Standard" Text height: 5.2606Specify start point of text or [Justify/Style]: Click PointSpecify height : 3

Specify rotation angle of text : 0Enter text: I love you

Enter text: Enter53. Command: MTEXT(Draw Menu bars -> Text ->Multiline Text)

eRbIsMrab;sresrcMnYnGkSreRcInCYr.Command: Mt MTEXT Current text style: "Standard" Text height: 3Specify first corner: Click PointSpecify opposite corner or [Height/Justify/Line spacing/Rotation/Style/Width]: Click Pointbnab;mkeyIg)an Text Window or Multiline Text dUcxageRkam

54. Command: Regen(View Menu bars -> Regen)

eRbIsMrab;eFVIeGayrgVg;manragmUlnigBRgIkbRgm)an.Command: regen

Regenerating model.55. Command: EDIT (Modify menu bar -> Object ->Text)

eRbIsMrab;EkERbGkSrnigbEnmGkSr.Command: ddedit

7/22/2019 Auto Cate


Select an annotation object or [Undo]: Click ObjectCommand: ed Select an annotation object or [Undo]: Click Object

cMNaMDouble click a text object. enaHGacEkERb)an56. Command: Chang

eRbIsMrab;dUrlkNrbs; Object . eKGacdUrTisedA bnat;dUrTMhM;rgVg;dUrTisedA text .k> dUrTisedAbnat;tammMCommand: - ch

CHANGESelect objects: Click Object

Select objects: Right ClickSpecify change point or [Properties]: -30

x> karbrTMhMrgVg;Command: -ch

CHANGESelect objects: Click ObjectSelect objects: Right ClickSpecify change point or [Properties]: -20

K> karbr TextCommand: -ch

Select objects: Click ObjectSelect objects: Right ClickSpecify change point or [Properties]: Click PointEnter new text style : Civil Specify new height :20Specify new rotation angle : 45

Enter new text : Enter

7/22/2019 Auto Cate


K> karbrepSgCommand: -ch

CHANGESelect objects: Click ObjectSelect objects: Right ClickSpecify change point or [Properties]: p

Enter property to change[Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: c

New color [Truecolor/COlorbook] : redEnter property to change[Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:

57. Dimension Style:(Format Menu bars ->Dimension Style)(Dimension menu bar->style)

eRbIsMrab;kMNt;TMrg;nkarvas;Evgrbs;rUb.

Command: d

DIMSTYLE

- Set Current: sMrab;kMNt;GVIEdlkMBugeFVI- Modify: sMrab;eRCIerIsbdUrRbePT Dimension-Override: sMrab;EkGVIEdlkMBugeFVI- Compare: sMrab;eRbobeFobbemIleQaHEdleyIg)anbegItenaHmanGVIxH.-New: sMrab;begIteQaHfIkMueGayCan;KanigmanRbePTxusKa.

New Style NamesMrab;dak;eQaH Use for Tak;TgeTAnigdimension EdleyIgcg;eRbI Start with CaeQaHEdleyIgkMBugEteRbI Continue sMrab;bnedIm,IeRCIserIsEdlmanrUbxageRkam.

7/22/2019 Auto Cate


Line mantYnaTIsMrab;kMNt; BNbnat; KMlat nig kMras; Color: sMrab;dUrBN Dimension Line weight: sMrab;kMNt;kMras;

Line type: sMrab;RbePTbnat; Baseline Spacing: sMrab;KMlat Dim line1: sMrab;biTr)aedk Dim line2: sMrab;biTr)aedk Ext line1: sMrab;biTr)aQr Ext line2: sMrab;biTr)aQr

Extend beyond dim lines: sMrab;bntbegalswg Offset from origin: cMgayBIbegalcab;

Symbols and ArrowsmantYnaTIsMrab;kMNt;BN k,alRBYj nig kMras;

First: sMrab;eRCIserIsk,alRBYjTI1 Second: sMrab;eRCIserIsk,alRBYjTI2

Leader: sMrab;k,alRBYj

Arrow Size: TMhMk,alRBYj

7/22/2019 Auto Cate


Text: mantYnaTIsMrab;sresrGkSr Text style: dUrRbePTGkSrb Font Text Color: sMrab;BNGkSr Text height: sMrab;kMNt;kMBs;GkSr Vertical: sMrab;dak;GkSrtamGkS (Y) Horizontal: sMrab;dak;GkSrtamGkS (X) Offset from dim lines: sMrab;dkXaGkSrBIr)a dimension

Fit: sMrab;kMNt;TMhMGkSredaysVyRbvti.

Use Over all scale of 300

Primary units:mantYnaTIsMrab;kMNt;RbBn/cMnYnKt;nigkMNt;epSgeTot.

Unit format: kMNt;eRCIserIsRbBn

7/22/2019 Auto Cate


Precision: kMNt;CacMnYnKt;nigTsSnPaK Prefix: dak;elxBImux Suffix: dak;xageRkay Scale factor: kMNt;CaTMhM FMbtUceTAtamkarkMnt;.

58. Command: Dimension Linear(Dimension menu bars ->Linear)

eRbIsMrab;vas;RbEvgGgt;Rtg;.

Command: dliDIMLINEARSpecify first extension line origin or : Click ObjectSpecify second extension line origin: Click ObjectSpecify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click PointDimension text = 100

Command: dliDIMLINEARSpecify first extension line origin or :Select object to dimension: Click Object

Specify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click pointDimension text = 1000

Command: dliDIMLINEARSpecify first extension line origin or : Click ObjectSpecify second extension line origin: Click ObjectSpecify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: mSpecify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click PointDimension text = 100

7/22/2019 Auto Cate


Command: dliDIMLINEARSpecify first extension line origin or :Click ObjectSelect object to dimension:Click ObjectSpecify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: aSpecify angle of dimension text: 45

Specify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click PointDimension text = 100

59. Command: Dimension Aligned(Dimension menu bars -> Aligned)

eRbIsMrab;vas;Ggt;eRTtnigRsbrbs;Object.Command: dal DIMALIGNEDSpecify first extension line origin or : Click ObjectSpecify second extension line origin: Click ObjectSpecify dimension line location or[Mtext/Text/Angle]: Click PointDimension text = 200

Command: dalDIMLINEARSpecify first extension line origin or :Select object to dimension: Click ObjectSpecify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click pointDimension text = 1000

Command: dli DIMLINEARSpecify first extension line origin or : Click ObjectSpecify second extension line origin: Click Object

Specify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: mSpecify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point

7/22/2019 Auto Cate


Dimension text = 100

Command: dliDIMLINEARSpecify first extension line origin or :Click ObjectSelect object to dimension:Click ObjectSpecify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: aSpecify angle of dimension text: 45Specify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click PointDimension text = 100

60. Command: Arc Length(Dimension menu bars ->Arc Length)

eRbIsMrab;vas;ExSekagnig Arc.Command: dar

DIMARCSelect arc or polyline arc segment: Click ArcSpecify arc length dimension location, or [Mtext/Text/Angle/Partial/Leader]: Click PointDimension text = 405

61. Command: Ordinate (Dimension menu bars -> Ordinate)

eRbIsMrab;rkcMgaycMenalEkgrvagGkS(x) nigGkS (y).Command: dor

DIMORDINATESpecify feature location: endp ofSpecify leader endpoint or [Xdatum/Ydatum/Mtext/Text/Angle]:Dimension text = 30.0000

7/22/2019 Auto Cate


62. Command:Dimension Radius(Dimension menu bars ->Radius)

eRbIsMrab;vas;kaMrgVg;nigGgt;Fr.Command: dra

DIMRADIUSSelect arc or circle: Click ObjectDimension text = 25Specify dimension line location or [Mtext/Text/Angle]:

Command: draDIMRADIUSSelect arc or circle: Click ObjectDimension text = 200Specify dimension line location or [Mtext/Text/Angle]: aSpecify angle of dimension text: 60Specify dimension line location or [Mtext/Text/Angle]: Click Point

Command: draDIMRADIUSSelect arc or circle: Click ObjectDimension text = 200Specify dimension line location or [Mtext/Text/Angle]: m

Specify dimension line location or [Mtext/Text/Angle]: Click Point

7/22/2019 Auto Cate


63. Command: Jogged(Dimension menu bars ->jogged)eRbIsMrab;vas;kaMrgVg;EdlmanlkNCam:Ud.

Command: djoDIMJOGGEDSelect arc or circle: Click ObjectSpecify center location override: Click Point

Dimension text = 20Specify dimension line location or [Mtext/Text/Angle]:Click PointSpecify jog location:Click Point

64. Command: Dim diameter(Dimension menu bars ->Diameter)

eRbIsMrab;vas;Ggt;pwtrgVg;.Command: ddi

DIMDIAMETERSelect arc or circle: Click ObjectDimension text = 50.0000Specify dimension line location or [Mtext/Text/Angle]: Click Point

Command: ddiDIMDIAMETERSelect arc or circle: Click ObjectDimension text = 200Specify dimension line location or [Mtext/Text/Angle]: mSpecify dimension line location or [Mtext/Text/Angle]: Click Point

Command: ddiDIMDIAMETERSelect arc or circle: Click Object

Dimension text = 200Specify dimension line location or [Mtext/Text/Angle]: aSpecify angle of dimension text: 45Specify dimension line location or [Mtext/Text/Angle]: Click Point

65. Command: Angular(Dimension menu bars ->Angular)

eRbIsMrab;vas;mMunigFr.Command: dan

DIMANGULAR

7/22/2019 Auto Cate


Select arc, circle, line, or : Click ObjectSelect second line: Click ObjectSpecify dimension arc line location or [Mtext/Text/Angle]: ClickPoint

Dimension text = 45

66. Command: Quick Dimension(Dimension menu bars -> Quick Dimension)

eRbIsMrab;brTItaMgDimensioneTAtamtMrUvkar.Command: qdim

Associative dimension priority = EndpointSelect geometry to dimension: 1FoundSelect geometry to dimension: Click ObjectSpecify dimension line position, or[Continuous/Staggered/Baseline/Ordinate/Radius/Diameter/datumPoint/Edit/seTtings] :Click Point

67. Command: Baseline(Dimension menu bars -> Baseline)

eRbIsMrab;vas;bnb:uEnvamancMnuccab;epImrYm.Command: dba

Specify a second extension line origin or [Undo/Select] : Click PointDimension text = 15Specify a second extension line origin or [Undo/Select] : Click PointDimension text = 400Select base dimension:

7/22/2019 Auto Cate


68. Command: Continue(Dimension menu bars -> Continue)

eRbIsMrab;vas;Objectbnbnab;rhUtdl;ObjectcugeRkay.

Command:dcoDIMCONTINUESpecify a second extension line origin or [Undo/

Select] : Click PointDimension text = 60Specify a second extension line origin or [Undo/Select] : Click PointDimension text = 50Specify a second extension line origin or [Undo/Select] :Click PointDimension text = 80Specify a second extension line origin or [Undo/Select] :Click PointSelect continued dimension:

69. Command: Dimension space(Dimension menu bars -> dimension space)

eRbIsMrab;eGayRbEvgenAcenaHbcMgayBIKa.

k>karkMNt;Cak;lak;Command: dimspace

Select base dimension:Click ObjectSelect dimensions to space: Click ObjectSelect dimensions to space: Click objectEnter value or [Auto] : 100x>karkMNt;sVyRbvtn

Command: dimspace Select base dimension:Select dimensions to space: Click ObjectSelect dimensions to space: Click objectEnter value or [Auto] :

7/22/2019 Auto Cate


70. Command: Dimension Break(Dimension menu bars -> Dimension Break)

eRbIsMrab;pac;ecjBIDimension mUyeTADimension mYyeTot.k>karpac;CasVyRbvtnCommand: dimbreak

Select a dimension or [Multiple]: Click ObjectNo object selected.Select a dimension or [Multiple]:Click ObjectSelect object to break dimension or [Auto/Restore/Manual] :

x>karRtlb;eRkayCommand: dimbreak

Select dimension to add/remove break or [Multiple]: mSelect dimensions: Specify opposite corner: 2 foundSelect dimensions: Click ObjectSelect object to break dimensions or [Auto/Remove] : r1 object modifiedK>karkat;tamkMNt;Command: dimbreak Select dimension to add/remove break or [Multiple]: Click ObjectSelect object to break dimension or [Auto/Manual/Remove] : mSpecify first break point: Click PointSpecify second break point:Click Point1 object modified

71. Command: Tolerance(Dimension menu bars ->Tolerance)

eRbIsMrab;;cMNaMGVImYyenAelIObject .Command: tolerance

7/22/2019 Auto Cate


72. Command: Center Mark(Dimension menu bars -> Mark)

eRbIsMrab;rkcMnucpwtrgVg;.Command: dce

DIMCENTERSelect arc or circle: Click Object

73. Command: Inspection(Dimension menu bars -> Inspection)

eRbIsMrab;dak;m:UdbcMNaMGVImYy.Command: diminspect

Select dimensions: 1 foundSelect dimensions: Click Object

74. Command: Jogged linear(Dimension menu bars -> jogged linear)

eRbIsMrab;dak;m:Ud DimensionCommand: dimjogline

Select dimension to add jog or [Remove]: Click ObjectSpecify jog location (or press ENTER):

7/22/2019 Auto Cate


75. Command: Dimension Edit(Dimension menu bars ->Dimension Edit)

eRbIsMrab;Ek Code Dimension rbs;Object .k> karbrelx CodefCommand: dimedit

Enter type of dimension editing [Home/New/Rotate/Oblique]: NSelect objects: Click ObjectSelect objects:

x> karRtlb;mkedImvijCommand: dimedit

Enter type of dimension editing [Home/New/Rotate/Oblique] : hSelect objects: Click ObjectSelect objects:

K> karbgVlCommand: dimedit

Enter type of dimension editing [Home/New/Rotate/Oblique] : r Specify angle for dimension text: 60 Select objects: Click ObjectSelect objects: Right Click

7/22/2019 Auto Cate


X> karbgVlr arCommand: dimedit

Enter type of dimension editing [Home/New/Rotate/Oblique]: o Select objects: Click ObjectSelect objects: Right Click

Enter obliquing angle (press ENTER for none): 45

76. Command: Dimension Text Edit(Dimension menu bars ->Dimension Text Edit)

eRbIsMrab;EkERbGkSrrbs; Dimension .k> karbrelx CodexageqVgCommand: dimtedit

Select dimension:Click ObjectSpecify new location for dimension text or [Left/Right/ Center/Home/Angle]: L

x> karbrelx CodexagsaMCommand: dimtedit

Select dimension: Click ObjectSpecify new location for dimension text or [Left/Right/Center/Home/Angle]: R

K> karbrelx CodekNalCommand: dimtedit

Select dimension: Click ObjectSpecify new location for dimension text or [Left/Right/Center/Home/Angle]: C

X> karbrelx CodeCamMCommand: dimtedit

Select dimension: Click ObjectSpecify new location for dimension text or [Left/Right/Center/Home/Angle]: aSpecify angle for dimension text: 45

7/22/2019 Auto Cate


g> karbrelxRtlb;mkedImvijCommand: dimtedit

Select dimension: Click Object

Specify new location for dimension text or [Left/Right/Center/Home/Angle]: h

77. Command: Xref(Insert Menu bars -> Xrf Manger)

eRbIsMrab;naMrUbBIFile epSgcUleTAkg File EdleyIgkMBugKUr.

Command: xref

Attach sMrab;TajykFile mk Detach dk File ecjvijBIAttach Unload sMrab;dkrUbecjEteQaHFile Reload sMrab;Load ecjBIUnloadEtb:ueNaH. Bind sMrab;Pab;rUbEdleyIg)anbBaleTAkg File.

78. Command: Image(Insert Menu bars -> Image Manger)

eRbIsMrab;bBalrUbfteTAkgKMnUrrbs;eyIg.

Command: _image

7/22/2019 Auto Cate


Attach sMrab;TajykFile mk Detach dk File ecjvijBIAttach Unload sMrab;dkrUbecjEteQaHFile enAdEdl. Reload sMrab;Load ecjBIUnloadEtb:ueNaH. Bind sMrab;Pab;rUbEdleyIg)asnbBaleTAkg File.

79> Command: Draw order(Tools menu bars -> Draw order)eRbIsMrab;bBannigRtlb; Object

k>bBaneTAeRkayCommand: draworder

Select objects: Click ObjectSelect objects: Right ClickEnter object ordering option [Above objects/Under objects/ Front/Back] : B

80> Command: Edit hatch(Modify -> Object->Edit hatch)eRbIsMrab;Ekbpas;brhatch .

Command: hatchedit

Select hatch object: Click Object

81> Command: Edit Polyline(Modify -> Object->Poly line)eRbIsMrab;Ekbpas;br Polyline nigline .Command: pedit

PEDIT Select polyline or [Multiple]: Click Object

7/22/2019 Auto Cate


Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Undo]: sEnter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Undo]:

`

Command: peditSelect polyline or [Multiple]: mSelect objects: Click ObjectSpecify opposite corner: 4 found

Select objects: Right ClickConvert Lines and Arcs to polylines [Yes/No]? Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype

gen/Undo]: JJoin Type = ExtendEnter fuzz distance or [Jointype] :3 segments added to polylineEnter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltypegen/Undo]:

82> Command: Edit Spline(Modify -> Object->Spline)eRbIsMrab;Ekbpas;br Poly line .Command: Splinedit

Select spline:Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: FEnter a fit data option[Add/Close/Delete/Move/Purge/Tangents/toLerance/eXit] : XEnter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]:

83> Command: pediteRbIsMrab;Ekbpas;br object.Command: pePEDIT Select polyline or [Multiple]: mSelect objects: Click Object

Select objects: Right ClickEnter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]: w Specify new width for all segments: 10Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]:

7/22/2019 Auto Cate


84> Command: Layer (Format menu bars->Layer)eRbIsMrab;kMNt;RbePTbnat; BN kMras;cak;esarniglak;Object.Command: Layer

- New Property Filter eRbIsMrab;bgajeQaHFilter fI

- New Group Filter eRbIsMrab;begIteQaHGroup fI

- New Layer eRbIsMrab;begIteQaHLayer fI

- Delete eRbIsMrab;lubeQaHLayer ecal

7/22/2019 Auto Cate


- Set Current: eRbIsMrab;Select Layer EdlkMBugeFVIkar

- Name: eRbIsMrab;dak;eQaH- On: eRbIsMrab;biTnigebIk- Lock: eRbIsMrab;cak;esar- Color: eRbIsMrab;dak;BN

- Line Type: eRbIsMrab;dak;RbePTbnat;- Line Weight: eRbIsMrab;dak;kMras;bnat;

85> Command: LayoffeRbIsMrab;lak;biT Object.Command: layoff

Current settings: Viewports=Off, Block nesting level=BlockSelect an object on the layer to be turned off or [Settings/Undo]: Click Object

Layer "Wall" is current, do you want to turn it off? [Yes/No] : Y

Layer "Wall" has been turned off.Select an object on the layer to be turned off or [Settings/Undo]:

86> Command: LayoneRbIsMrab;ebIk Object.Command: layon

Warning: layer "Layer1" is frozen. Will not display until thawed.All layers have been turned on.

87> Command: Layout (Insert menu bars -> Layout)eRbIsMrab;begItTMrg;RkdasnigerobcMkickarbBaab;.k>karbegt Layout

Command: layoutEnter layout option [Copy/Delete/New/Template/Rename/ SAveas/Set/?] : n Enter new Layout name : khin x>karlub Layout

Command: layout

Enter layout option [Copy/Delete/New/Template/Rename/SAveas/Set/?] : d Enter name of layout to delete : khin Layout "khin" deleted.

7/22/2019 Auto Cate


K>karftcMlg LayoutCommand: LAYOUT

Enter layout option [Copy/Delete/New/Template/Rename/SAveas/ Set/?] : cEnter name of layout to copy : Enter layout name for copy : Norton

Layout "khin" copied to "norton".X>karbreQaH LayoutCommand: LAYOUT

Enter layout option [Copy/Delete/New/Template/Rename/SAveas/Set/?] : rEnter layout to rename : Enter new layout name: nuLayout "khin" renamed to "nu".g>karrkSaTuk Layout

Command: LAYOUTEnter layout option [Copy/Delete/New/Template/Rename/SAveas/Set/?] :saEnter layout to save to template :

88> Command: Print (Files menu bars -> Layout)eRbIsMrab;e)aHBum

7/22/2019 Auto Cate

67/67

Printer/Plotter

Name: karbgajma:kma:sIune)aHBum

Auto Cate

Documents

Transcript of Auto Cate