AUTO CAD CIVIL 3D 2009 -...

AutoCAD Civil 3D 2009 Australia and New Zealand Country Kit

1

AUTOCAD CIVIL 3D 2009

AUSTRALIA AND NEW ZEALAND COUNTRY KIT


2

1 TABLE OF CONTENTS 2 Purpose of this document: ......................................................................................................... 4

3 Drafting and Plans Production Settings ....................................................................................... 5

3.1 Drawing Templates ............................................................................................................ 5

3.2 Sheet Creation ................................................................................................................... 5

3.3 Drafting and Labeling ......................................................................................................... 5

3.4 Settings .............................................................................................................................. 5

3.5 Reports .............................................................................................................................. 6

4 General Enhancements and Maintenance................................................................................... 7

4.1.1 Changes to existing layer colours ............................................................................... 7

All Cyan and near-Cyan Layers Get Changed to Colour 150 ................................................................ 8

Green Layers Get Changed to Colour 92 ........................................................................................... 10

V-CTRL-LINE-SHOT Layer .................................................................................................................. 11

5 OBJECT LAYERS, OBJECT COMPONENT DISPLAY LAYERS, COLOURS, LINETYPES AND LAYER

MANAGER ........................................................................................................................................ 12

6 GENERAL ................................................................................................................................... 13

7 POINTS...................................................................................................................................... 20

7.1 Point Styles ...................................................................................................................... 20

7.2 Point Table Styles ............................................................................................................. 24

7.3 Point Label Styles ............................................................................................................. 25

7.4 Description Key Sets ......................................................................................................... 26

8 SURFACES ................................................................................................................................. 27

8.1 Surface Styles................................................................................................................... 27

8.2 Surface Table Styles ......................................................................................................... 31

8.3 Surface Label Styles.......................................................................................................... 33

9 PARCELS .................................................................................................................................... 35

9.1 Parcel Styles ..................................................................................................................... 35

9.2 Parcel Table Styles ........................................................................................................... 35

9.3 Parcel Area Table Styles ................................................................................................... 36


3

9.4 Parcel Line Label Styles .................................................................................................... 40

10 GRADING ............................................................................................................................. 49

10.1 Grading Criteria Sets ........................................................................................................ 49

10.2 Grading Styles .................................................................................................................. 49

11 ALIGNMENT ......................................................................................................................... 50

11.1 Alignment Table Styles ..................................................................................................... 53

12 PROFILE ............................................................................................................................... 59

13 PROFILE VIEW ...................................................................................................................... 63

14 SAMPLE LINES ...................................................................................................................... 70

15 SECTIONS ............................................................................................................................. 71

16 SECTION VIEWS .................................................................................................................... 72

17 MASS HAUL LINE .................................................................................................................. 77

18 MASS HAUL VIEW ................................................................................................................ 78

19 Pipe Rules ............................................................................................................................ 79

20 PIPE NETWORK .................................................................................................................... 80

21 PIPE ..................................................................................................................................... 81

22 STRUCTURE .......................................................................................................................... 82

23 Corridor Design Standards .................................................................................................... 83

24 CORRIDOR............................................................................................................................ 84

25 QUANTITY TAKEOFF ............................................................................................................. 85

26 Quantities Report Style Sheets ............................................................................................. 86

27 SURVEY ................................................................................................................................ 87

28 VIEW FRAME ........................................................................................................................ 88

29 MATCH LINE ......................................................................................................................... 89

30 TOOLBOX ............................................................................................................................. 91


4

2 PURPOSE OF THIS DOCUMENT: This document defines the content to be delivered as part of the Civil 3D 2009 Country Kit.

Revision Status

Work In Progress

Under Review

Update In Progress

Accepted

Approval Status

Not Approved

Approved


5

3 DRAFTING AND PLANS PRODUCTION SETTINGS Update or create settings, object styles, and labeling utilizing the new features and functionality

added in Civil 3D 2009 listed below. Wherever possible, API-based Custom Draw drafting functionality

in the 2008 Country Kit will be replaced with new Sheet Creation, Drafting, and Labeling template

settings and styles.

3.1 DRAWING TEMPLATES

Currently AutoCAD Civil 3D 2008 ships with the following set of drawing templates.

• _Au(NZ)stralian AutoCAD Civil3D 2009 Design.DWT

• _New_Zealand_Au(NZ)toCAD_Civil3D_2009.DWT

The above templates are enhanced with the following:

• Content for new objects – so that appropriate object/label/table styles are added

• Updated feature and command settings to accommodate various feature

enhancements.

• Updated drawing settings to set appropriate layers for new objects in Civil 3D

(including new labels)

• Repaired errors that exist in the previous DWTs

• Australian and New Zealand speed tables

• Title blocks which include fields for Plan Production content

3.2 SHEET CREATION

Templates to define border, frame, title block, North Arrow and other general sheet settings

and styles for plan and profile sheets:

• _Au(NZ)stralian_Au(NZ)toCAD_Civil3D_2009_PlanProfile_Sheet.DWT

• _New_Zealand_Au(NZ)toCAD_Civil3D_2009_PlanProfile_Sheet.DWT

3.3 DRAFTING AND LABELING

• Enhance templates with settings and styles that define the appearance and annotation of

cross section sheets

• Enhance templates to add appropriate styles for Contour Labels

• Enhance templates to add appropriate styles and settings for annotation of axis margins,

and for title box band labels for Profiles and Cross Sections

• Enhance templates to add appropriate Annotation variables. For example, add variables to

labels to control size and rotation of label elements.

3.4 SETTINGS


6

• Enhanced templates include layer settings for the new layers added to Civil 3D 2009

• This following table lists all new object types added to the object layers tab and their

content:

Object Layer Modifier Value

Mass Haul Line C-ROAD-MASS-LINE None None

Mass Haul View C-ROAD-MASS-VIEW None None

• Enhanced templates include command settings for new commands added in Civil 3D 2009

3.5 REPORTS

Report_AlignStaInc.dvb Report_ParcelVol.dvb

Report_Utilities.dvb Report_ProfilePVCurve.dvb

Report_AlignPISta.dvb Report_PointsStaOffset.dvb

Report_AlignStakeout.dvb Report_CorridorSlopeStake.dvb

Report_ProfileStaInc.dvb Report_ParcelMapCheck.dvb

Report_ProfilePVICurve.dvb Report_HEC-RAS.dvb

• All report macros in the 2008 Country Kit written in VBA code updated to operate correctly

with Civil 3D 2009.


7

4 GENERAL ENHANCEMENTS AND MAINTENANCE

4.1.1 CHANGES TO EXISTING LAYER COLOURS The next version of AutoCAD is changing out-of-the-box background colour to light yellow (250, 250,

236). This change causes lot of existing layer colours in Civil 3D (R2008) templates to look pale and un-

readable. Therefore it is decided that we should change some of these colours so that they work well

if the background colour is Black, White, or the new ACAD background colour (250, 250, 236).

There are three categories of changes, all to layer colour assignments:

1. All layers using Yellow get changed to colour 11,

2. All text layers using Cyan get changed to colour 150, and

3. All text layers using Green get changed to colour 92.

The first category is the most dramatic, as it is a shift from Yellow to a colour that might be described

as dark peach. The other two categories are much less dramatic, as they use similar but darker

colours.

Layers Using Yellow Get Changed to Colour 11

Yellow (255, 255, 0) is the most problematic colour on light colour backgrounds. Colour 11 (255, 127,

127) is a sort of dark peach that displays nicely on both light and dark colour backgrounds.

Following are the layers to note:

Layer

V-NODE-TEXT

V-NODE-NGAS

V-CTRL-NODE-SHOT

V-CTRL-LINE-NETW

C-TOPO-MINR-N

C-ROAD-TEXT

C-ROAD-STAN-MINR

C-ROAD-STAN-MAJR

C-ROAD-STAN


8

C-ROAD-SAMP-TEXT

C-ROAD-PROF-TITL

C-ROAD-PROF-TEXT

C-ROAD-PROF-STAN-MINR

C-ROAD-PROF-STAN-MAJR

C-ROAD-PROF-STAN-GEOM

C-ROAD-PROF-LTOF

C-ANNO-VFRM-TEXT

From Colour 50 (which is very close to Yellow) to Colour 11:

Layer

V-ROAD-CURB

All Cyan and near-Cyan Layers Get Changed to Colour 150

Cyan (0, 255, 255) is nearly as problematic as yellow, and it is particularly problematic for text on light

backgrounds. Colour 150 (0, 127,255) is similar to Cyan, only darker.

All layers using Cyan to Colour 150:

Layer

V-SURV-NTWRK

V-CTRL-VCPT

V-CTRL-TRAV

V-CTRL-HCPT

V-CTRL-BMRK

C-ROAD-SCTN-N


9

C-ROAD-PROF-NEW

C-ROAD-PROF-N

C-ROAD-PROF-GRID

C-ROAD-PROF-DIAG

C-PROP-BNDY

C-ANNO-TABL-TITL

C-ANNO-TABL-TEXT

C-ANNO-MTCH-TEXT

Colours that are using colours that are very close to Cyan to Colour 150. These include layers using

Colour 141 (127, 223, 255):

Layer

C-TOPO-WSHD

C-TOPO-WDRP

C-ROAD-CORR-PATT

Layers using Colour 131 (127, 255, 255):

Layer

V-SITE-FNCE

C-ROAD-SAMP

C-PROP-PATT

C-ANNO-VFRM

And layers using Colour 130 (which, by the way, *is* Cyan – 0, 255, 255):


10

Layer

V-SURV-LINE

Green Layers Get Changed to Colour 92

Green (0, 255, 0) text does not display well on light colour backgrounds. Colour 92 (0, 165, 0) is just a

darker green. Text using Colour 92 displays quite nicely on light backgrounds, and Colour 92 shows up

just as well as Green on a black background.

Layers using Green changed to Colour 92:

Layer

V-NODE-STRM

V-NODE-SSWR

V-CRTL-TRAV-ERRO

V-CTRL-NODE-KNOW

C-TOPO-MAJR-N

C-TOPO-FEAT

C-ROAD-SPIR

C-ROAD-SCTN-TITL

C-ROAD-SCTN-TEXT

C-ROAD-SCTN-LABL

C-ROAD-PROF-ASMC

C-ROAD-LABL

C-ROAD-CNTR-N

C-PROP-TEXT


11

C-PROP-BRNG

In addition, there are layers using slight variants of green that get changed to Colour 92:

Layer

V-SURV-LABL – Colour 122

C-TINN-BNDY – Colour 110

C-TOPO-GRAD-FILL–Colour 94

C-TOPO-GRAD – Colour 94

C-PROP-RSRV – Colour 94

V-SITE-VEGE – Colour 80

V-CTRL-LINE-SHOT Layer

The V-CTRL-LINE-SHOT layer gets changed from Colour 177 to Colour 45:

Layer

V-CTRL-LINE-SHOT


12

5 OBJECT LAYERS, OBJECT COMPONENT DISPLAY LAYERS,

COLOURS, LINETYPES AND LAYER MANAGER

This kit implements basic Object Layers configuration where Layer Name Suffix is used for Surface

Object only. The aim is to introduce this feature to the users. Other objects, such as Alignments and

Alignment related objects and collections can be configured to use Layer name Modifiers.

In Addition, Object Component Display is configured to use Component specific Layers. Object

Component Display Properties are set to use either “ByLayer” or “ByBlock” for Colour and Linetype

settings. This method is selected to allow control of Object Components Visibility when Civil 3D

drawings are opened in AutoCAD with Object Enabler. Users can control the visibility of Object Display

Components using Layers visibility.

To support this method and facilitate easier control over

Components visibility, the supplied drawing Template includes

a set of Layer Property Filters that use Layer Names to group

layers:

Colour scheme for the supplied templatewas designed to

provide equal visibility of components on either white or black

background in AutoCAD Dsiplay Options.


13

6 GENERAL

Style Name Description Marker Type Marker Symbol Name

E 2 A$C285871D3

Bench Point 0

_Au(NZ) GP Alignment Geometry Point Marker 2 _Wipeout_Circle

Kerb Lip Lip of Kerb Point Marker. 0

Basic 0

SubLayer 0

Crown 0

Marked Point 2 AeccTickTriangle

Batter Line 0 AeccArwClosedFilled

Kerb 0

Survey Known Point 2 AeccTickTriangle

Basic Square 1

T 2 A$C39DB4AE3

Survey Radial Shot 1

Basic Circle with Cross 1


14

_No Markers 1

Footpath 0

TPIT 2 Tpit

Uncoded 0

_Au(NZ) IP Point 2 AeccTickTriangle

Channel Channel Point Marker. 1

Drain Invert 0

GATE 2 Gate

Batters - SubGrade 1

Alignment Geometry 1

V 2 Cfpdi1

Edge of Unpaved Shoulder 0

Slope Stake - Cut 0 AeccArwClosedFilled

Standard 0

Edge of Paved Shoulder 0

Slope Stake - Fill 0 AeccArwClosedFilled

Hinge 0

Drain Borders 0


15

Lane Break 0

Edge of Bitumen 0

Survey UnKnown Point 2 AeccTickTriangle

Basic X 0

Basic Triangle 2 AeccTickTriangle

IP Point 2 AeccTickTriangle

G 2 A$C285871D3

Feature Lines Name Description

_Au(NZ) Corridor

_Au(NZ) Design String

Basic

Basic Feature Line

Batters

Corridor Batters

Corridor Batters - Cut

Corridor Batters - Fill

Corridor Batters – Subgrade


16

Corridor Bench

Corridor Crown

Corridor Drain

Corridor Edge of Bitumen

Corridor Edge of Paved Shoulder

Corridor Edge of Unpaved Shoulder

Corridor Hinge - Cut Slope

Corridor Hinge - Fill Slope

Corridor Hinge - Top Slope

Corridor Kerb Invert (Water table)

Corridor Kerb Line

Corridor Lane Break

Corridor SubLayer - Feature Line

Corridor Top Soil - Feature Line

Footpath_In

Footpath_Out

Grading Batters

Grading Drain


17

Kerb-Back (BackCurb)

Kerb-Invert (Flowline_Gutter)

Kerb-Lip (Flange)

Kerb-Top (TopCurb)

No Display

Slope Patterns Name Description Remarks

_Au(NZ) lines

_Au(NZ) tadpoles

Code Sets Name Description

_Au(NZ) All Codes


18

Note Label Styles Name Description

_Au(NZ) General Construction

Note

This Construction Note will automatically scale and rotate to follow the paper space viewports's scale

and rotation.

_Au(NZ) Levels Label Labels levels showing both Finished and Existing Surface. Surface names have to be assigned when

creating a label.

_Au(NZ) Road Data

Construction Note

This Construction Note will automatically scale and rotate to follow the paper space viewports's scale

and rotation.

Line Label Styles Name Description

_Au(NZ) 3D Length and Bearing

_Au(NZ) Bearing and Distance

_Au(NZ) Length and Grade

Label Styles Curve Name Description

_Au(NZ) Radius and Length

_Au(NZ) Radius Arc length

Chord and Bearing Arc Radius, Arc length, Chord length and Chord Bearing


19

Label Styles Marker Name Description

_Au(NZ) Crown

_Au(NZ) Offset and Level

_Au(NZ) Reserve

Label Styles Link Name Description

_Au(NZ) Grade

_Au(NZ) Slope

Label Styles Shape Name Description

_Au(NZ) Shape Code and Area


20

7 POINTS

7.1 POINT STYLES

Point Styles Name Description Remarks

Shrub - 5ft Style for shrub - 5'

Storm Sewer Manhole Style for storm sewer

manhole

Bound Style for bound

PPL El Pole Point

PSM

PPT Transformer

PSIL

BIN

Basic

STA

Tree Style for tree

Drill Hole Style for drill hole.

PTEM


21

Utility Pole Style for utility pole.

PUNP

SV

Sign (single pole) Style for single pole sign.

Hydrant (existing) Style for existing fire

hydrant

SIGN

Horizontal Curve Point Style for horizontal curve

point.

Sanitary Sewer Manhole Style for sanitary sewer

manhole.

PTRE-3D

ELP

PELB-Elec Pit

PAYBOX

DRG - Drain Grate

PSLP

Gas Valve Style for gas valve.

STATION


22

Vertical Curve Point Style for vertical curve

point.

Water Shutoff Style for water shutoff.

PUNB

Benchmark Style for benchmark.

TPIT

BOLLARD

Water Valve Style for water valve.

STAR PICKET

Test Pit Style for test pit.

ICB

SWMH

COCO

Standard

FH

Well Style for fire hydrant well.

TR

SMH


23

Iron Pin Style for iron pin.

WM

Catch Basin Style for catch basin.

Level Dot

Guy Pole Style for guy pole.

Hydrant (proposed) Style for proposed fire

hydrant.

PP


24

7.2 POINT TABLE STYLES

Point Table Styles Name Description Remarks

_Au(NZ) Point Coordinates


25

7.3 POINT LABEL STYLES

Point Label Styles Name Description Remarks

_Au(NZ) Raw Code only

_Au(NZ) Level and Code

_Au(NZ) No Labels

_Au(NZ) Level and Raw Code

_Au(NZ) CivCad

_Au(NZ) Level: S1 + S2 – S3

_Au(NZ) Code only

_Au(NZ) Pt Number only

_Au(NZ) PT Number Level Code

_Au(NZ) PT Number Level Code

(Raw)

_Au(NZ) Levels only


26

7.4 DESCRIPTION KEY SETS

Description key

Sets

Name Description Remarks

_Au(NZ) Numeric VIC ROADS and Geocomp

Standards

_Au(NZ) Alpha Generic CivilCad style coding


27

8 SURFACES

8.1 SURFACE STYLES

Surface Style Name Description

_Au(NZ) 2D Borders Shows surface border

as a 2D

_Au(NZ) Aspect Map TIN triangles shaded

based on the triangle

aspect - North

Azimuth orientation

of the slope: North

Aspect – Red

South Aspect - Blue

²

_Au(NZ) Contours - Background

1m

_Au(NZ) Contours - Design -

0.1m

_Au(NZ) Contours - Design - 1m

_Au(NZ) Contours - NS - 0.2m


28

_Au(NZ) Contours - NS - 0.5m

_Au(NZ) Contours - NS - 1m



_Au(NZ) Contours & Triangles -

0.2m


29

_Au(NZ) Levels Shading 3D faces of the

surface model, colour

coded based on level

range

²

_Au(NZ) No Display

_Au(NZ) Slope Arrows &

Triangles

²

_Au(NZ) Slope Arrows &

Watersheds


30

_Au(NZ) Slopes

²

_Au(NZ) Triangles - Design

_Au(NZ) Triangles - NS

_Au(NZ) Triangles & Points


31

8.2 SURFACE TABLE STYLES

Direction Table

Style


_Au(NZ) aspect

Slope Table Style Name Description Remarks

_Au(NZ) Cut and Fill Depths

_Au(NZ) Levels

Slope Arrow Table

Style


_Au(NZ) Slope Arrows

Contour Table

Style


_Au(NZ) Contours


32

WaterShed Table

Style


_Au(NZ) Watersheds


33

8.3 SURFACE LABEL STYLES

Watershed Label

Style


_Au(NZ) Watershed details Watershed areas

based on surface TIN.

Spot Elevation

Label Style


_Au(NZ) Spot Levels Surface spot level

Label Style

_Au(NZ) Spot Levels - Angled Surface spot level

Label Style


34

Slope Label Style Name Description Remarks

_Au(NZ) Grade Label Grade label showing

percent character

_Au(NZ) Slope Label Showing rise : run as

1:2

Contour Label

Style


_Au(NZ) Dsgn Major Design Surface Major Contour Label Style

_Au(NZ) Dsgn Minor Design Surface Minor Contour Label Style

_Au(NZ) NS Minor Natural Surface Minor Contour Label Style

_Au(NZ) User Contour

_Au(NZ) NS Major Natural Surface Major Contour Label Style


35

9 PARCELS

9.1 PARCEL STYLES

Parcel Styles Style Name Description Remarks

POS Public Open Space

ROAD RES Road Reserve lot

L Australian Lot

9.2 PARCEL TABLE STYLES

Parcel Segment

Table Styles


_Au(NZ) Lot lines Bearing and Length

or Chord Bearing and

Radius


36

9.3 PARCEL AREA TABLE STYLES

Parcel Area Table

Styles


_Au(NZ) Lot Areas Lot # and Size

Parcel Line Table

Styles


_Au(NZ) Bearings and

Lengths


37

Parcel Curve Table

Syles


_Au(NZ) Arcs R & A & C & Ch

details


38

Curve Segment

Label Styles


_Au(NZ) Span Arc 10sec

10mm

_Au(NZ) Span Arc 1min

10mm

_Au(NZ) Arc 10sec 100mm


10mm

_Au(NZ) Arc 10sec 1m


_Au(NZ) Arc 1min 10mm

_Au(NZ) Span Arc 10sec 1m


10mm


100mm




39

Parcel Area Styles Name Description Remarks

_Au(NZ) Site Block of Land -

Overall

_Au(NZ) No L 999

_Au(NZ) No & Area L 999

500m2


40

9.4 PARCEL LINE LABEL STYLES

Parcel Line Label

Styles


_Au(NZ) Brg Dist 1min

10mm

Bearing to the

nearest minute and

Distance to the

nearest 10mm. For

lines shorter than or

equal to 30m.

_Au(NZ) Brg 1min Bearing to the

nearest minute. For


equal to 30m.

_Au(NZ) Span Brg Dist 5sec Spanning across

multiple line

segments, Bearing is

rounded to the

nearest 5 seconds,

Distance is rounded

to the nearest 1cm

for Queensland

rounding Standards

_Au(NZ) Brg Dist 10sec

10mm

Bearing to the

nearest 10sec and

Distance to the

nearest 10mm. For

lines longer than 30m


41

but shorter or equal

to 200m.

_Au(NZ) Span BD 20sec

10mm

Span Bearing above

Distance for distance

longer than 30m and

shorter or equal to

200m

_Au(NZ) Bearing 20sec Bearing to the

nearest 20sec

_Au(NZ) Span BD 10sec 1m Span Bearing above

Distance for

distances longer than

5000m

_Au(NZ) BD 20sec 10mm Bearing to the

nearest 20sec, above

Distance to the

nearest 10mm. For


and shorter than or

equal to 200m

_Au(NZ) Span Brg Dist 10sec

10mm

Span Bearing and

Distance on line. For

lines longer than

200m but shorter

than 500m

_Au(NZ) Span Brg 10sec Span the commomn

Bearing value over


42

multiple lot segments


10mm

Bearing rounded to

the nearest 5

seconds, Distance

rounded to the

nearest 10mm for

Queensland rounding

Standards

_Au(NZ) BD 1min 10mm Bearing to the

nearest minute,

above Distance to the

nearest 10mm. For


equal to 30m


nearest 10sec

_Au(NZ) Span BD 1min

10mm

Span Bearing above

Distance for

distances shorter or

equal to 30m

_Au(NZ) Span Distance

Special Integer

Rounded to the

nearest whole meter

to support writing off

trailing zeroes with

"m" suffix to

delineate 6 from 9,

18 from 81, 89 from


43

68 etc.


10mm

Distance rounded to

the nearest 1cm

spanning across

multiple lots

_Au(NZ) Span Brg Dist 1min

10mm

Span Bearing and


lines shorther than

30m

_Au(NZ) Span Brg 1min Span the commomn

Bearing value over



100mm

Distance rounded to

the nearest 100mm

spanning across

multiple lots


100mm

Span Bearing and


lines longer than

500m but shorter

than 5000m


10mm

Span Bearing above


longer than 200m but

shorter than or equal

to 500m


44



Distance to the

nearest 10mm for

lines longer than

200m but shorter or

equal to 500m

_Au(NZ) Distance Special

Integer

Rounded to the

nearest whole meter


trailing zeroes with

"m" suffix to

delineate 6 from 9,

18 from 81, 89 from

68 etc.


1m

Span Bearing and


lines longer than

5000m

_Au(NZ) Bearing 1minute Bearing to the

nearest 1minute


100mm

Span Bearing above


longer than 500m but

shorter than or equal

to 5000m

_Au(NZ) Span Distance 1m Distance rounded to

the nearest 1m


45

spanning across

multiple lots


nearest 5sec


Integer

Rounded to the

nearest whole meter


trailing zeroes for

round distances *.00

_Au(NZ) Distance 10mm Distance rounded to

the nearest 1cm

spanning across

multiple lots

_Au(NZ) Brg Dist 10sec 1m Bearing to the

nearest 10sec and

Distance to the

nearest 1m. For lines

longer than 5000m.

_Au(NZ) Brg 10sec Bearing to the

nearest 10sec. For

lines longer than

5000m.

_Au(NZ) Dist 1m Distance to the

nearest 1m. For lines

longer than 5000m.

_Au(NZ) Distance 1m Distance rounded to


46

the nearest 1m

_Au(NZ) Distance 100mm Distance rounded to

the nearest 100mm

spanning across

multiple lots


10mm

Bearing to the

nearest 20sec and

Distance to the

nearest 10mm. For



to 200m.

_Au(NZ) Brg 20sec Bearing to the

nearest 20sec. For



to 200m.



Distance to the

nearest 100mm. For

lines longer than

500m but shorter or

equal to 5000m

_Au(NZ) Distance Integer Rounded to the

nearest whole meter


trailing zeroes for


47

round distances *.00


10mm

Span Bearing and



but shorter than

200m

_Au(NZ) Span Brg 20sec Span the commomn

Bearing value over


_Au(NZ) BD 5sec 10mm Bearing rounded to

the nearest 5 seconds

above Distance

rounded to the

nearest 10mm for

Queensland rounding

Standards


10mm

Bearing rounded to


above Distance

rounded to the

nearest 1cm for

Queensland rounding

Standards - spanning

across multiple lots

_Au(NZ) Span B 5sec Bearing rounded to


for Queensland

rounding Standards -


48

spanning across

multiple lots

_Au(NZ) Span D 10mm


100mm

Bearing to the

nearest 10sec and

distance to the

nearest 100mm. For

lines longer than

500m but shorter or

equal to 5000m).

_Au(NZ) BD 10sec 1m Bearing to the


Distance to the

nearest metre. For

lines longer than

5000m


49

10 GRADING

10.1 GRADING CRITERIA SETS

Grading Criteria

Sets


_Au(NZ) General purpose

10.2 GRADING STYLES

Grading Styles Name Description Remarks

_Au(NZ) Cut Slope Tadpoles

_Au(NZ) Generic Generic purpose

Grading style

_Au(NZ) Cut Slope Lines

_Au(NZ) Fill Slope Tadpoles


50

11 ALIGNMENT

Alignment

Styles

Name Description

_Au Design Layout (Components By

Layer)

General centreline design style

_Au Drawing Production (Component

Layer By Object - Colours ByBlock)


_Au Drawing Production (Component

Layer By Object)


_Au Drawing Production (Fixed

Component Layer)


_Au(NZ) Strings General strings design style

_Au(NZ) Existing General existing centreline style


51

Design

Check Sets

Name Descript

ion

Design Checks

_Au Basic Minimum Arc Length Between

Tangents

Example: Set to 2” of driving along the curve at Design Speed

_Au Maximum Tangent

Length

_Au Maximum Tangent Length Example: Set to be less than or equal to 20 times Design Speed (in km/h)

_Au Spiral-Curve-Spiral A parameter for Spiral1

A parameter for Spiral1

Minimum Arc Length Between

Spirals

Label Sets Name Label

Styles

Name

_Au(NZ) All Labels Major

Station

_Au(NZ) Perpendicular Tick

Minor

Station

_Au(NZ) Tick Only

Geometr

y Point

_Au(NZ) GP Data

Design

Speed

_Au(NZ) Speed Chainage

_Au(NZ) No Labels


52

_Au(NZ) Geometry Tick Geometr

y Point

_Au(NZ) Tick Only

_Au(NZ) Major Minor and

Geometry

Major

Station


Minor

Station

_Au(NZ) Tick Only

Geometr

y Point

_Au(NZ) GP Data

_Au(NZ) Major Parallel

and Geometry Tick

Major

Station

_Au(NZ) Parallel Tick

Geometr

y Point

_Au(NZ) Tick Only

_Au(NZ) Major and

Geometry

Major

Station


Geometr

y Point

_Au(NZ) GP Data

_Au(NZ) Major and Minor Major

Station


Minor

Station

_Au(NZ) Tick Only

_Au(NZ) Highway Labels Major

Station


Minor _Au(NZ) Tick Only


53

Station

Geometr

y Point

_Au(NZ) GP Data

Design

Speed

_Au(NZ) Speed Chainage

_Au(NZ) Gas

_Au(NZ) Channel Flow

_Au(NZ) Drainage

_Au(NZ) Storm Sewer

_Au(NZ) Sanitary Sewer

_Au(NZ) Power Line

_Au(NZ) Telecom

Major

Station

_Au(NZ) Gas

_Au(NZ) Channel Flow

_Au(NZ) Drainage

_Au(NZ) Storm Sewer

_Au(NZ) Sanitary Sewer

_Au(NZ) Power Line

_Au(NZ) Telecom

11.1 ALIGNMENT TABLE STYLES

Segment

Table Styles

Name Description

_Au(NZ) Line Arc Spiral Lengths

_Au(NZ) Chainage Easting Northing Radii Bearing

IP


54

_Au(NZ) Ch East North Bear Rad Tang Ang Length

Spiral Table

Styles

_Au(NZ) Spirals

Line Table

Styles

_Au(NZ) Lines

Curve Table

Styles

_Au(NZ) Arcs


55

Tangent

Intersection

Styles


_Au(NZ) IP Details Detailed design

layout and setout

data for the curve

arc segment

displayed above

the tangent IP.

Design

Speed Styles


_Au(NZ) Speed Chainage Design Speed

above Chainage

Station

Equation

Styles


_Au(NZ) Chainage Change To label a point on alignment where chainage values

have to continue from a different base. Eg. chainage

1234.56 becomes chainage 0.00 and all chainages

ahead continue to grow from chainage value 0.00

Station Name Description Remarks


56

Offset

_Au(NZ) Right side Ch & Offset Line

_Au(NZ) Ch & Offset Table

_Au(NZ) Left side Ch & Offset Line

Spiral Styles Name Description Remarks

_Au(NZ) Design Data Detailed spiral data.

Label mode is on.

_Au(NZ) Name Only

Curve Styles Name Description Remarks

_Au(NZ) Name only

_Au(NZ) Design Data

Line Styles Name Description Remarks

_Au(NZ) Name only

_Au(NZ) Design Data

Geometry Name Description Remarks


57

Point Styles

_Au(NZ) Tick Only Creates a circular

tick only.

_Au(NZ) Circle Tick Only Creates a circular

tick only.

_Au(NZ) Line Tick Only Creates a Line tick

only.

_Au(NZ) GP Data Creates a cicular

tick with a

perpendicular line .

The geometry point

data is placed along

the line.

_Au(NZ) Quarter Points Creates a Line tick

only.

Minor

Station

Styles


_Au(NZ) Tick Only

Major

Station

Styles


ARD-AlignmentLabelStyle General Advanced

Road Design

chainage display


58

style


_Au(NZ) Parallel Tick


59

12 PROFILE

Station Elevation Label

Styles

Style Name Description

_Au(NZ) VC Min

_Au(NZ) VC End

_Au(NZ) VC IP

_Au(NZ) VC Max

_Au(NZ) Crest Curve

_Au(NZ) VC

_Au(NZ) VC Start

_Au(NZ) Vertical Curve

_Au(NZ) Sag Curve

Tangent Label _Au(NZ) Design Tangent Slope

_Au(NZ) Design Tangent Grade

Grade Break Label _Au(NZ) Vertical with line

Major Station Label Perpendicular with Tick

Minor Station Label Perpendicular with Tick


60

Profile View _Au(NZ) Design Surface

_Au(NZ) Existing Surface Two

_Au(NZ) Existing Surface

Design Checks _Au(NZ) Maximum Grade Flat Terrain _Austroads Maximum Grade Flat Terrain

_Au(NZ) Maximum Grade Mountainous

Terrain

_Au(NZ) Maximum Grade Mountainous Terrain

_Au(NZ) Maximum Grade Rolling Terrain _Au(NZ) Maximum Grade Rolling Terrain

_Austroads Length of Crest VC –

Appearance Criterion when S < L

_Austroads Crest VC Length

Horizontal Geometry

Point Label

_Au(NZ) Horiz Align TP

Label Set Style Name Description Style Name

_Au(NZ) No

Labels

_Au(NZ)

Existing

Geometry Point _Au(NZ) Horiz Align TP


61

Surface

_Au(NZ)

Design Basic

Set

Grade Break _Au(NZ) Vertical with line

Line _Au(NZ) Design Tangent Grade

Sag Curve _Au(NZ) Sag Curve

Crest Curve _Au(NZ) Crest Curve

_Au(NZ)

Design VC

Vertical Curves label style

Label Styles Style Name


Sag Curve _Au(NZ) Vertical Curve

Crest Curve _Au(NZ) Vertical Curve

_Au(NZ) VC

Details


Sag Curve _Au(NZ) VC

Sag Curve _Au(NZ) VC End

Sag Curve _Au(NZ) VC IP

Sag Curve _Au(NZ) VC Max

Sag Curve _Au(NZ) VC Min


62

Sag Curve _Au(NZ) VC Start

Crest Curve _Au(NZ) VC

Crest Curve _Au(NZ) VC End

Crest Curve _Au(NZ) VC IP

Crest Curve _Au(NZ) VC Max

Crest Curve _Au(NZ) VC Min

Crest Curve _Au(NZ) VC Start


63

13 PROFILE VIEW

Profile View Styles Name Description

_Au(NZ) Highway Design no Title

_Au(NZ) Road Presentation 5x 5 times vertically exaggerated

_Au(NZ) Pipes

_Au(NZ) Pipes no Title

_Au(NZ) Road Presentation 20x no Title 20 times vertically exaggerated

_Au(NZ) Road Design





_Au(NZ) Road Design no Title

_Au(NZ) Highway Design


64

Station

Elevation

Label Styles

Name Description

_Au(NZ) Chainage & Level Label For Long section details

Depth Label

Styles

_Au(NZ) Slope Rise over Run

_Au(NZ) Depth Label

_Au(NZ) Grade percents

Band Sets Name Description Style Name

_Au(NZ) Pipes With Depths to

Invert no Title

_Au(NZ) Highway Design no

Title

Vert Geo _Au(NZ) Vertical Geometry no Title

Horz Geo _Au(NZ) Single Carriageway no Title

Profile Data _Au(NZ) Depths P2 - P1 no Title

Profile Data _Au(NZ) Design Levels P2 no Title

Profile Data _Au(NZ) Existing Levels P1 no Title

Profile Data _Au(NZ) Chainage no Title


65

_Au(NZ) Surface Levels Only Profile Data _Au(NZ) Existing Levels P1

Profile Data _Au(NZ) Chainage

_Au(NZ) Pipes

_Au(NZ) Simple Design Profile Data _Au(NZ) Design Levels P2

Profile Data _Au(NZ) Existing Levels P1


_Au(NZ) Pipes no Title

_Au(NZ) Road Design Vert Geo _Au(NZ) Vertical Geometry

Horz Geo _Au(NZ) Single Carriageway

Profile Data _Au(NZ) Depths P2 - P1

Profile Data _Au(NZ) Design Levels P2



_Au(NZ) Road Design no Title Vert Geo _Au(NZ) Vertical Geometry no Title

Horz Geo _Au(NZ) Single Carriageway no Title

Profile Data _Au(NZ) Depths P2 - P1 no Title

Profile Data _Au(NZ) Design Levels P2 no Title

Profile Data _Au(NZ) Existing Levels P1 no Title


66

Profile Data _Au(NZ) Chainage no Title

_Au(NZ) Pipes With Depths to

Invert

_Au(NZ) Highway Design Vert Geo _Au(NZ) Vertical Geometry

Horz Geo _Au(NZ) Single Carriageway

Profile Data _Au(NZ) Depths P2 - P1

Profile Data _Au(NZ) Design Levels P2



Bands - Profile

Data

_Au(NZ) Building Line Levels Right

_Au(NZ) Chainage

_Au(NZ) Depth to Invert P2 - P1 To be used with pipes band set. Create

pipe profile view and digitise pipe invert

line as profile layout then assign it as

"profile1" in the profile view properties

bands to display depth

_Au(NZ) Chainage no Title

_Au(NZ) Design Levels Left Kerb

_Au(NZ) Depths P2 - P1


67

_Au(NZ) Depths P2 - P1 no Title

_Au(NZ) Depth to Invert P2 - P1 no Title To be used with pipes band set. Create

pipe profile view and digitise pipe invert

line as profile layout then assign it as

"profile1" in the profile view properties

bands to display depth

_Au(NZ) Building Line Levels Left

_Au(NZ) Design Levels Right Kerb

_Au(NZ) Design Levels P2

_Au(NZ) Existing Levels P1

_Au(NZ) Design Levels P2 no Title

_Au(NZ) Existing Levels P1 no Title

Bands -

Vertical

Geometry

_Au(NZ) Vertical Geometry

_Au(NZ) Vertical Geometry no Title

Bands -

Horizontal

Geometry

_Au(NZ) Single Carriageway

_Au(NZ) Single Carriageway no Title


68

Bands

Superelevation

Data

_Au(NZ) Superelevation Data

_Au(NZ) Superelevation Data no Title

Bands

Sectional Dat

_Au(NZ) Section Line Data

_Au(NZ) Section Line Data no Title

Bands Pipe

Network

_Au(NZ) Ground Levels

_Au(NZ) Ground Levels no Title

_Au(NZ) Invert Levels

_Au(NZ) Invert Levels no Title

_Au(NZ) Pipe Data

_Au(NZ) Pipe Data no Title

_Au(NZ) Pit Chainage

_Au(NZ) Pit Chainage no Title

_Au(NZ) Rim Levels

_Au(NZ) Rim Levels no Title

_Au(NZ) Sump Depth

_Au(NZ) Sump Depth no Title


69

_Au(NZ) Trench Type

_Au(NZ) Trench Type no Title


70

14 SAMPLE LINES

Sample

Line

Styles

Name Description

_Au(NZ) Road Sections Sample Lines Metric, for use with roads.

Sample

Line

Label

Styles

_Au(NZ) Chainage only


71

15 SECTIONS

Section Styles Name Description

_Au(NZ) Existing Ground

_Au(NZ) Design Datum

_Au(NZ) Design Ground

Label Sets _Au(NZ) No Labels Used for Corridor Design Surface

Sections in Section Views. No

labeling of section segments in

section view is implemented with

this set of styles. The selected

points offset/level and segment

grade labels are defined by the

subassembly code set's label styles

_Au(NZ) Grade Break Points

_Au(NZ) Existing Section Data Add labels to this Style to suit the

Natural Surface section labeling

_Au(NZ) Crossgrades

Major Offset Label Styles _Au(NZ) Level

Minor Offset Label Styles _Au(NZ) Offset Offset

Grade Break Label Styles _Au(NZ) Section Points Design data


72

16 SECTION VIEWS

Section View Styles Name Description

_Au(NZ) QLD Rural Roads Where the DATUM, Parent Alignment and

Chainage are shown similar to the Profile

View Style. This is a recommended style for

better stacking of section views on the page.

_Au(NZ) Road Section

_Au(NZ) Full Section

Group Plot Styles _Au(NZ) Plot by Page 500

_Au(NZ) Plot All Sections Plot All Sections for the sample line group

_Au(NZ) Plot by Page

_Au(NZ) Plot by Page 100

_Au(NZ) Plot by Page 200


73

Sheet Styles _Au(NZ) A1 500

Basic1

_Au(NZ) A1 (Landscape) A1 Sheet layout in Landscape

_Au(NZ) A1 200 Compact

_Au(NZ) A1

_Au(NZ) A1 100

_Au(NZ) A1 200

_Au(NZ) Compact Section Where the DATUM, Parent Alignment and

Chainage are shown similar to the Profile

View Style. This is a recommended style for

better stacking of section views on the page.


74


75

Offset Elevation Label Styles _Au(NZ) Offset and Level

Grade Label Styles _Au(NZ) Section View Depth

Grade

Band Sets _Au(NZ) Section QLD Rural Section only without Band Data. To be used

with Corridor Point Code Labels only.Use with

the Compact Section View Style.

Alignment Name, Chainage and Datum

included

_Au(NZ) Segment Widths and

Grades

Cross section segments labelled with widths

and grades in two bands.

_Au(NZ) Section Standard Design Levels, Existing Levels and Offsets

_Au(NZ) Section Full Set

_Au(NZ) Sections Segment

Data

Cross section segments labelled with widths

and grades in two bands.

Band - Section Data _Au(NZ) QLD Rural Roads

Levels

_Au(NZ) Offsets Standard cross sections offsets

_Au(NZ) Design Levels Corridor Top Surface Levels

_Au(NZ) Existing Levels Existing Surface

_Au(NZ) Datum Levels Corridor Datum surface levels

Band - Section Segment _Au(NZ) Segment Grades


76

_Au(NZ) Segment Offsets Standard cross sections offsets

_Au(NZ) Segment Widths Corridor Top Surface Levels

Table Styles Total Volume _Au(NZ) Segment Grades



Table Styles Material _Au(NZ) Segment Grades




77

17 MASS HAUL LINE

Mass Haul Line Styles Name Description

_Au(NZ) Basic


78

18 MASS HAUL VIEW

Mass Haul

View Styles

Name Description

_Au(NZ) Basic


79

19 PIPE RULES

Pipe Rules Name Description

_Au(NZ) General purpose Localized C3DNetworkRules.dvb


80

20 PIPE NETWORK

Parts Lists Name Description

_Au(NZ) Drainage

Interference Styles Name Description

_Au(NZ) Servicelines Interference

Commands Settings Name Description


81

21 PIPE

Pipe Styles Name Description

_Au(NZ) Crossing Drainage Pipe

_Au(NZ) Drainage Pipe

_Au(NZ) Single Line Drainage Pipe

Pipe Rule Set _Au(NZ) Drainage Pits

_Au(NZ) Sewer Pits

Label Styles Plan Profile _Au(NZ) Drainage Pipe Data

_Au(NZ) Drainage Pipe Name

Label Styles Crossing

Section

_Au(NZ) Drainage Pipe

_No Labels

Table Styles _Au(NZ) Pipe Schedule


82

22 STRUCTURE

Structure Styles Name Description

_Au(NZ) Drainage Pit

_Au(NZ) Sewer

_Au(NZ) SEP

Structure Rule Set _Au(NZ) Drainage Pits

_Au(NZ) Sewer Pits

Label Styles _Au(NZ) Drainage Pit Data

_Au(NZ) Drainage Pit Name

Table Styles _Au(NZ) Pit Schedule


83

23 CORRIDOR DESIGN STANDARDS

Name Description

Australia _AUSTROADS 2003 Design Guidelines.xml


84

24 CORRIDOR

Corridor Styles Name Description

_Au(NZ) Design

CommandsASSEMBLY

Assembly Styles Name Description

_Au(NZ) Assembly Style

CommandsSUBASSEMBLY

Subassembly Styles Name Description

Commands


85

25 QUANTITY TAKEOFF

Quantity Takeoff Criteria Name Description

_Au(NZ) General purpose

Table Styles Total Volume _Au(NZ) Cumulative Earthworks Table

Table Styles Material

Volume

_Au(NZ) Material Table


86

26 QUANTITIES REPORT STYLE SHEETS

Name Description

Scripts StationFormatting.xsl

NumberFormatting.xsl

Stylesheets Select Material.xsl

Mass Haul - Multiple Materials.xsl

earthwork.xsl


87

27 SURVEY

Name Description

Survey Database Settings _Au(NZ) SurveyDb Settings.sdb_set

Survey Equipment Database _Au(NZ) Common Survey

Equipment.edb

Extended Properties Definition _Au(NZ) Prototype LandXML.sdx-def The e-plan specification is still

under development.

Figure Prefix Database _Au(NZ) Figure Prefix Database.fdb

Network Styles _Au(NZ) Networks

Figure Styles _Au(NZ) Figures


88

28 VIEW FRAME

View Frame Styles Name Description

_Au(NZ) View Frame

Label Styles View Frame _Au(NZ) View Frame General purpose


89

29 MATCH LINE

Name Description

Match line Styles _Au(NZ) Matchline Plan

_Au(NZ) Matchline Profile

Label Styles Match Line Left _Au(NZ) Matchline Left

Label Styles Match Line

Right

_Au(NZ) Matchline Right


90


91

30 TOOLBOX

ANZ Country Kit Installs a customized “ANZ Reports Manager” within AutoCAD Civl 3D 2009

ANZ Reports Manager allows users to access all reports that are available in

AutoCAD Civil 3D 2009. The customization of the standard reports in the ANZ

Reports Manager address terminology, number formatting and some additional

features and controls on the report forms..

Reports in AutoCAD Civil 3D are of two types: LandXML and VBA (.NET). ANZ Country Kit has some additional features within some VBA Reports:

• ANZ Reports Manager

o Parcel

� Lot Volumes Report

This report requires a Volume type Surface in the drawing and a number of Parcel

objects whose perimeters are fully within the extents of that Volime Surface’s

Boundaries.

Users need to select a Volume Surface and a Site containing Parcel objects:


92

A volume report will be generated for each parcel object in the selected site:


93

o Points

o Chainage Offset To Points

A couple of additional options and controls have been added

to this report tool:

The drop-down list of Point Groups in the current

drawing


94

Selection of points from the selected Point Group only

The generated report shows data for selected points only:

AUTO CAD CIVIL 3D 2009 -...

Documents

Transcript of AUTO CAD CIVIL 3D 2009 -...