Auger Filling Machine - · PDF fileSemi-auto Auger Type Powder Metering Filling Machine (Bench...
Transcript of Auger Filling Machine - · PDF fileSemi-auto Auger Type Powder Metering Filling Machine (Bench...
Auger Filling MachineForm / Fill / Seal Packaging Machine
■ Tel: 886-2-6616-0668/2651-3352 ■ Fax: 886-2-6616-0669/2653-7629 ■ E-mail: [email protected] ■ http://www.goodmorning.com.tw/en.html
GOOD MORNING Enterprise Co., Ltd.5F-10, No.32, Cheng-Gong Road, Sec, 1, Nan-Gang, Taipei, Taiwan
Semi-auto Auger Type Powder MeteringFilling Machine (Bench Model)
Model
Machine Size
Machine Weight
Power Required
GSM - 2002
250kg
220V, 3φ, 3.5HP, 50/60Hz
L: 1000 X W: 1100 X H: 2100 mm
SPECIFICATIONS :
FEATURES :• The SM-2002 auger type metering filling machine is suitable for all types of free-flow
and non free-flow powder and granular products.
• The transmission system is driven by a servo motor.
• Touch-sensing screen for operation control.
• Japan Mitsubishi PLC.
• Loading capacity of material storage tank is 60L
(Available to connect with a material supply systerrD.
• Auger pipe for material infeed is one-piece manufactured from stainless steel.
• Easy to install and dismantle the auger without need of any tool.
Easy and convenient cleaning for time-saving .
• In case malfunction occurs, the machine will stop automatically for protection .
• 20 sets of memory modules.
APPLICABLE PRODUCTS :
Designed for filling and metering various powder and granular products,
such as flour, crude sugar, seasoning flavor, salt, MSG, chemical powder
and biological powder, etc.
Range of filling and metering: 50-5000g
(Easy to change capacity by simply changing the auger).
GSM - 2002
Semi-auto Auger Type Powder MeteringFilling Machine
Model
Machine Size
Machine Weight
Power Required
Range of
Loading Capacity of
GSM - 2001
200kg
220V, 3φ, 3.5HP, 50/60Hz
L: 900 X W: 1050 X H: 2100 mm
GSM - 01
120kg
50kg - 5000g 1kg - 50g
60L 14L
220V, 3φ, 1.5HP, 50/60Hz
L: 800 X W: 600 X H: 1700 mm
SPECIFICATIONS :
FEATURES :
• The SM-2001 and SM-01 auger type metering filling machine are suitable for all types of free-flow
and non free-flow powder and granular products.
• The transmission system is driven by a servo motor.
• Touch-sensing screen for operation control.
• Japan Mitsubishi PLC.
• Auger pipe for material infeed is one-piece manufactured from stainless steel.
• Easy to install and dismantle the auger without need of any tool.
Easy and convenient cleaning for time-saving .
• In case malfunction occurs, the machine will stop automatically for protection .
• 20 sets of memory modules.
APPLICABLE PRODUCTS :
Designed for filling and metering various powder and granular products,
such as flour, crude sugar, seasoning flavor, salt, MSG, chemical powder,
medicine and Chinese herbs powder and biological powder, etc.
GSM - 2001 . GSM - 01
• GSM·2001 (Floor Model)Equipped with filling support plate with height adjustable. • GSM·01 (Smail Model)
Filling and Metering
Material Tank Available to Connect With a Material Supply System.
Automatic Auger Type Bottle /Can Metering Filling Machine
Model
Machine Size
Machine Weight
Power Required
GSM - 2101
300kg
220V, 3φ, 4.5HP, 50/60Hz
Filling Speed
Air Pressure
12 - 20 bottles (cans) / min
L: 1500 X W: 1100 X H: 2100 mm
SPECIFICATIONS :
FEATURES :• Straight-feed system for filling product into bottles and cans.
• Automatic bottles / cans positioning and elevation and vibratory filling.
• No filling in case of lack of bottle. The machine will stop automatically when bottles are jammed.
• Employ Japan SMC air cylinders.
• The machine does not run in case of no air supply or insufficient air pressure.
• The machine is available to be connected with automatic
bottle feeding system or a capping (can) system.
APPLICABLE PRODUCTS :
Designed for filling and metering various bottled /
canned powder and granular products, such as
canned milk powder, medicine powder and
Chinese herbs powder, food powder and chemical powder etc.
Range of filling and metering: 50-2000g.
GSM - 2101
5 - 6kg/cm 2
Automatic Powder Filling Plugging andCap Sealing Machine (Small Volume)
Model
Machine Size
Machine Weight
Power Required
GSM - 2102
950kg
220V, 3φ, 2.5HP, 50/60Hz
Filling Speed
Air Pressure
12 - 20 bottles (cans) / min( Vary with capacity )
L: 3000 X W: 870 X H: 2100 mm
SPECIFICATIONS :
FEATURES :• This machine provides powder filling, plug insertion and cap sealing functions.
• Bottles and cans are introduced by conveyor belt combined with indexing drives
and star wheel table.
• There is a photo sensor for bottle detection so to achieve a gold of Bottle-Fill
and No-Bottle-No-Fill.
• Automatic bottles / cans positioning and elevation, and vibratory filling.
• Employ Japan SMC air cylinder.
• The machine dose not run in case of no air supply
or insufficient air pressure.
APPLICABLE PRODUCTS :
Designed for automatic filling medicine
into bottle (small volume) and cap sealing,
such as Chinese herbs powder, dry syrup
powder and aerosol powder etc.
Range of filling and metering: 1-30g.
GSM - 2102
5 - 6kg/cm 2
• Roll-on Cap sealing
• Metering device • Material infeed auger
Automatic Bag Forming Filling MeteringPackaging Machine (Small Package)
FEATURES :• The STS-01 automatic bag forming filling metering packaging machine is suitable for all
types of free-flow and non free-flow powder and granular products.
• The machine is designed with a gusset type sealing mechanism, ensuring smooth
appearance of product without pin-hole problem. No material exists at sealing position
that assures superior tightness of sealing.
• Printing points photocell sensor is easy to adjust to eliminate waste of packaging film.
Simply input packaging length in case of no printing points photocell sensor.
• Minimum sealing temperature variation. Employ PID calculation to maintain temperature
tolerance within ±2'C.
• According to different kinds of products and filling weights, memory modules can be input
several sets for convenient management.
• The transmission system is driven by a servo motor (Mitsubishi from Japan) for high accuracy.
• The control system employs a touch-sensing screen for operational convenience.
• AIi air cylinders employ Japan (SMC) standards for dependable quality.
• The controller provides a self-diagnostic function. In case any machine trouble occurs,
such as no packaging film, no color tape, photocell sensor error, excessive or under
sealing temperature or air pressure failure etc, the machine will stop automatically.
The screen will display problem points and trouble-shooting instructions.
• The machine is available to equip with a nitrogen gas filling device, that allows
the oxygen existing in product to be controlled within under 2%.
• The machine is available to perform perforating packaging function
(Two or three packages perforating).
APPLICABLE PRODUCTS :
Designed for automatic bag forming filling and packaging for various
powder bags (small package) and sachets.
Range of filling and metering: 1-50g.
GSTS-01. GSTS-01-L
• Bag former
• Auger
Model
Machine Size
Machine Weight
Power Required
Range of PackagingFilm Sizes
( Product Sizes )
GSTS - 01
200kg
220V, 3φ, 7.5HP, 50/60Hz
L: 900 X W: 850 X H: 1900 mm
GSTS - 01 -L
120kg
W : 40 - 80 mm, W : 80 - 125 mm,L : 40 - 120 mm L : 120 - 165 mm
45 - 60 bags/min ( Vary with filling weight )
3-side sealing, 4-side sealing, 3-side back sealing
L: 1050 X W: 950 X H: 2100 mm
SPECIFICATIONS :
Packaging Speed
Packaging Method
Air Pressure 6 - 8kg/cm 2
Automatic Bag Forming Filling MeteringPackaging Machine (Liquid Small Package)
FEATURES :• The STS-01-LQ automatic bag forming filling metering packaging machine is suitable for
packaging all types of liquid and paste.
• The machine is designed with a gusset type sealing mechanism, ensuring smooth appearance
of product without pin-hole problem. No material exists at sealing position that assures
superior tightness of sealing.
• Printing points photocell sensor is easy to adjust to eliminate waste of packaging film.
Simply input packaging length in case of no printing points photocell sensor.
• Minimum sealing temperature variation. Employ PID calculation to maintain temperature
tolerance within ±2'C.
• According to different kinds of products and filling weights, memory modules can be input several sets for convenient management.
• The transmission system is driven by a servo motor (Mitsubishi from Japan) for high accuracy.
• Filling system employs a mono-screw pump.
• Spindle material: manufactured from SILICONE.
• Pump body material: All surface that contact with material and manufactured from stainless steel.
• Heat-resistant temperature: 130'C.
• External connector allows for easy dismantling for washing without need of tool.
• The control system employs a touch-sensing screen for operational convenience.
• AIi air cylinders employ Japan (SMC) standards for dependable quality.
• The controller provides a self-diagnostic function. In case any machine trouble occurs, such as
no packaging film, no color tape, photocell sensor error, excessive or under sealing temperature or air pressure failure etc,
the machine will stop automatically. The screen will display problem points and trouble-shooting instructions.
• The machine is available to perform perforating packaging function (Two or three packages perforating).
APPLICABLE PRODUCTS :
Designed for automatic bag forming filling and packaging for various
liquid and paste bags (Small package) and sachets.
Range of filling and metering: 1-50g.
GSTS - 01 - LQModel
Machine Size
Machine Weight
Power Required
Range of Packaging Film Sizes( Product Sizes )
300kg
220V, 3φ, 7.5HP, 50/60Hz
L: 900 X W: 850 X H: 1700 mm
GSTS - 01 -LQ
W : 40 - 80 mm, L : 40 - 120 mm
45 - 60 bags/min ( Vary with filling weight )
3-side sealing, 4-side sealing, 3-side back sealing
SPECIFICATIONS :
Packaging Speed
Packaging Method
Air Pressure 6 - 8kg/cm 2
Automatic Bag Forming Filling MeteringPackaging Machine (Big Package)
FEATURES :• The TS-2435 and TS-1625 automatic bag forming filling metering packaging machines are
suitable for all types of free-flow and non free-flow powder and granular products.
• The machine is designed with an air operated sealing mechanism, ensuring smooth appearance of product
without pin-hole problem. No material exists at sealing position that assures superior tightness of sealing.
• Printing point~ photocell sensor is easy to adjust to eliminate waste of packaging film. Simply inputs
packaging length in case of no printing points photocell sensor.
• Minimum sealing temperature variation. Employ PID calculation to maintain temperature
tolerance within ±2'C.
• According to different kinds of products and filling weights, memory modules can be input several
sets for convenient management.
• The transmission system is driven by a servo motor (Mitsubishi from Japan) for high accuracy.
• The control system employs a touch-sensing screen for operational convenience.
• AII air cylinders employ Japan (SMC) standards for dependable quality.
• Japan Mitsubishi PLC.
• The controller provides a self-diagnostic function. In case any machine trouble occurs,
such as no packaging film, no color tape, photocell sensor error, excessive or under sealing
temperature or air pressure failure etc, the machine will stop automatically.
The screen will display problem points and trouble-shooting instructions.
• The machine is available to be connected with initial material system.
• The machine is available to equip with a corner insert vertical bag device.
APPLICABLE PRODUCTS :
Designed for automatic bag forming filling and packaging for various
big powder bags, such as flour, milk powder, grain powder, chemical
powder, medical and Chinese herbs powder etc.
Range of filling and metering: 50-2000g.
GTS-2435. GTS-1625
• Bag former
• Sealing device
Model
Machine Size
Machine Weight
Power Required
Range of PackagingFilm Sizes
( Product Sizes )
GTS - 2435
750kg
220V, 3φ, 7.5HP, 50/60Hz
L: 1200 X W: 1650 X H: 3200 mm
GTS - 1625
600kg
W : 160 - 240 mm, W : 80 - 160 mm,L : 180 - 350 mm L : 150 - 250 mm
20 - 45 bags/min ( Vary with filling weight )
3-side back sealing, gusset
L: 1100 X W: 1500 X H: 2900 mm
SPECIFICATIONS :
Packaging Speed
Packaging Method
Air Pressure 6 - 8kg/cm 2
Automatic Bag Forming Electronic WeighingFilling Packaging Machine
FEATURES :• The SM-2203 automatic bag forming electronic weighing filling packaging machine is suitable
for all types of granular products.
• The machine is designed with an air operated sealing mechanism, ensuring smooth
appearance of product without pin-hole problem. No material exists at sealing position
that assures superior tightness of sealing.
• Printing points photoelectric sensor is easy to adjust to eliminate waste of packaging film.
Simply inputs packaging length in case of no printing points photoelectric sensor.
• Minimum sealing temperature variation. Employ PID calculation to maintain temperature
tolerance within ±2'C.
• According to different kinds of products and filling weights, memory modules can be input
several sets for convenient management.
• The transmission system of the packaging machine is driven by a servo motor (Mitsubishi from Japan) for high accuracy.
• The controller provides a self-diagnostic function. In case any machine trouble occurs, such as no packaging film, no color type,
photoelectric sensor error, excessive or under sealing temperature or air pressure failure etc, the machine will display problem
points and trouble-shooting instructions.
• Easy to set filling weight.
• Filling weight accuracy is controlled within ±1%.
• The weighing unit features automatic reset.
• Graduation of load cell is 1g.
• Double vibration metering design.
• The machine is available to be connected with initial material system.
• The machine is available to equip with a corner insert vertical bag device.
APPLICABLE PRODUCTS :
Suitable for filling weighing and packaging various granular products,
such as crude sugar, red beans, rice, green beans and feeding stuffs etc.
Range of filling and metering: 300-2000g.
GSM - 2203Model
Machine Size
Machine Weight
Power Required
Range of Packaging Film Sizes( Product Sizes )
700kg
220V, 3φ, 7.5HP, 50/60Hz
L: 1250 X W: 1650 X H: 3200 mm
GSM - 2203
W : 120 - 240 mm, L : 150 - 350 mm
25 - 30 bags/min ( Vary with filling weight )
3-side back sealing, gusset
SPECIFICATIONS :
Packaging Speed
Packaging Method
Air Pressure 6 - 8kg/cm 2
Semi-auto Auger Type Weighing Filling Machine
FEATURES :
• The weighing data is fed back to servo system to perform
2-step or 3-step filling. This permits filling accuracy reaching to ±0.1%.
• The transmission system is driven by a servo motor.
• Automatic scale weighing control.
• Japan Mitsubishi PLC.
• Graduation of load cell is 1g - Japan A&D system.
• Bag clamping device.
• The weighing unit features automatic reset.
• In case trouble occurs, the machine will stop automatically for safety protection .
• 20 sets of memory modules.
• One set of dust collector.
APPLICABLE PRODUCTS :
Especially ideal for weighing and filling various powder and
granular products requiring big volume and high accuracy, such
as highly priced medicine and Chinese herbs, biological powder,
chemical powder and food additive powder etc.
Range of filling and weighing: 1-25kg.
GSM - 2202
Model
Machine Size
Machine Weight
Power Required
GSM - 2202
350kg
220V, 3φ, 3.5HP, 50/60Hz
L: 1000 X W: 1100 X H: 2100 mm
SPECIFICATIONS :
Semi-auto Weighing Filling Machine
FEATURES :
• Easy to set weight.
• Filling weight accuracy is within ±1%.
• Automatic scale weighing control.
• Japan Mitsubishi PLC.
• Graduation of load cell is 1g.
• The weighing unit features automatic reset.
• Double vibration metering design.
• The machine is available to be connected with automatic material supply.
APPLICABLE PRODUCTS :
Suitable for weighing and filling various granular products,
such as crude sugar, red bean, rice, green bean and feed etc.
Range of filling and weighing: 50-3000g.
GSM - 02
Model
Machine Size
Machine Weight
Power Required
Filling SpeedSingle Scale : 6 - 8 bags /min
Double Scale : 12 - 16 bags /min
Three Scale : 20 - 24 bags /min
GSM - 02
250kg
220V, 3φ, 3.5HP, 50/60Hz
L: 900 X W: 950 X H: 1500 mm
SPECIFICATIONS :
• Automatic materialsupply device
Automatic Rotary Type Auger MeteringFilling Plugging and Cap Sealing Machine
FEATURES :
• The SM-300 automatic rotary type metering
filling machine is a rotary type filling and
metering machine. It is suitable for high
production bottled products with plug
insertion and cap sealing function.
APPLICABLE PRODUCTS :
Designed for high production automatic filling various powder
and granular products into plastic bottle and sectional bottle
with plug insertion and cap sealing function. Applicable products
include bottled medicine and Chinese herbs powder etc.
Range of filling and metering: 1-20g.
GSM - 300
Model
Machine Size
Machine Weight
Power Required
GSM - 300
1050kg
220V, 3φ, 4.5HP, 50/60Hz
Filling Speed
Air Pressure
60 - 80 bottles / min
L: 2000 X W: 1150 X H: 2100 mm
SPECIFICATIONS :
6 - 8kg / cm2
• According to different kinds of products and filling weights, memory modules
can be input several sets for convenient management.
• The control system employs a touch-sensing screen for operational convenience.
• AII air cylinders employ Japan (SMC) for dependable quality and stability.
• Japan Mitsubishi PLC.
• The machine is available to be connected with initial material system.
• It can be operated together with can/bottle conveyor, providing continuous filling operation.
• The transmission system of the filling machine is driven by a servo motor (Japan Mitsubishi)
for high accuracy.
• The filling system features automatic bottle guide, bottle positioning elevation and
vibration filling.
• No filling in case of lack of bottle. The machine will stop automatically when
bottles are jammed.
Automatic Multi-head Auger TypeFilling Metering Machine
FEATURES :
APPLICABLE PRODUCTS :
Suitable for high production automatic filling various powder
and granular products into bottle and can, such as canned milk
powder, bottled prickly-heat powder and bottled medicine and
GSM - 400
Model
Machine Size
Machine Weight
Power Required
GSM - 400
1250kg
220V, 3φ, 7HP, 50/60Hz
Filling Speed
Air Pressure
80 - 120 bottles / min
L: 3000 X W: 1750 X H: 2300 mm
SPECIFICATIONS :
6 - 8kg / cm2
• The SM-400 automatic filling metering machine is designed
for high production multi-head filling and metering for bottled
and canned products.
• It can be operated together with can/bottle conveyor for
multi-head filling operation.
• The parameter setting for each filling head is made independently.
• The transmission system of the filling machine is driven by a servo
motor (Japan Mitsubishi) for high accuracy.
• The filling system features automatic bottle guide, bottle positioning elevation
and vibratory filling.
• Automatic bottles/cans positioning and elevation, and vibration filling.
• There is a photo sensor for bottle detection so to achieve a gold of Bottle-Fill and No-Bottle-No-Fill.
• According to different kinds of products and filling weights, memory modules can be input
several sets for convenient management.
• The control system employs a touch-sensing screen for operational convenience.
• AII air cylinders employ Japan (SMC) standards for dependable quality.
• Japan Mitsubishi PLC.
• The machine is available to be connected with initial material system.
• The machine is available to be equipped with rear cap sealing system and labeling system.
Chinese herbs powder etc.
Range of filling and metering: 10-2000g.
GOOD MORNING ENTERPRISE CO., LTD.
http://www.goodmorning.com.tw/en.html