Auger Boring - Iroc Hydraulics Boring Machines Utilities Water Gas Sewer Communication Drainage...

8
Auger Boring Machines 24/30-150 36-600 42/48-600 48/54-900 60-1200 72-1200 84/96-1800

Transcript of Auger Boring - Iroc Hydraulics Boring Machines Utilities Water Gas Sewer Communication Drainage...

Auger BoringMachines24/30-150

36-60042/48-60048/54-90060-120072-120084/96-1800

Manufacturing the Latest in Auger Boring Technology for over 40 Years.

• Featuring an exceedingly productive rack & pinion system. No dogging or winching occurs when rapidly pulling the machine back to the starting position on the track.

• Fast! Necessary for pulling auger, steering rods and pushing product.

• High operator visibility into master pusher.

• Tremendous stability from the low centerline and wide stance.

• Hydraulically assisted clutch (not available on the 24/30-150 model) is easy and comfortable to operate.

• No hook rollers because the machine locks safely to the track.

• Easy auger installation with ergonomic operating controls. Allows for feathering of the rotation and slow turn of the shaft.

• Gauge system includes engine tachometer, engine warning light, hour meter and thrust pressure reading.

www.AmericanAugers.com

Avai lable in Sizes to Perform al l your Underground Boring Needs

84/96-1800

72-1200

60-1200

48/54-900

42/48-600

36-600

24/30-150

How to Determine Which Machine is Right fo

48/54-900Maximum Casing Size lbs. of thrust available

(in this case 900,000 lb

Auger BoringMachines

Uti l i t ies Water Gas Sewer Communicat ion DrainageAmerican Augers offers a huge selection of auger boring tools and accessories to compliment any job you encounter.

Quik Tran

The fast return system exclusively from American Augers. Quik Tran provides up to 10,000 lbs. (4,536 kg) or 20,000 lbs. (9,072 kg) with dual drives of push/pull at high speed with no dogging or winching during retract. It engages directly to the machine track for easier operation in challenging work conditions.*Not available on 24/30-150 model.

t for You?

ailable x 1000000 lbs.)

AUGER BORING MACHINES PERFORMANCE SPECIFICATIONS

24/30-150 36-600 42/48-600

Power Train

Engine: Deutz D3L2011F Interim

Tier IV DieselRating: 46 HP (34.3 kW)Max. Engine Speed: 2,800 RPMEngine Torque: 89 ft. lbs. (120.7 Nm)

2,800 RPM 101 ft. lbs. (136.9 Nm)

1,700 RPMFuel Capacity: 10 U.S. Gallons (38 L)Hydraulic Capacity: 14.5 U.S. Gallons (55 L)

Engine: Deutz D914LO6 Tier III DieselRating: 116 HP (86.5 kW)Max. Engine Speed: 2,300 RPMEngine Torque: 228 ft. lbs. (309.1 Nm) 2,300 RPM 276 ft. lbs. (374.2 Nm) 1,600 RPMFuel Capacity: 18.5 U.S. Gallons (70 L)Hydraulic Capacity: 22.6 U.S. Gallons (86 L)

E R M E F H

Transmission

Type: Borg Warner T-18 4-SpeedClutch: Spring applied with 10 in.

(254 mm) diameter single disk

Type: Eaton FS-5205A 5-SpeedClutch: Dual plate, spring applied with 14 in. (356 mm) diameter single d

Gearbox Ratio: 46.7:1 Ratio: 54.2:1

Hydraul ic System

Max. Thrust: 150,000 lbs. (68 tonnes)Hydraulic Thrust Cylinder: (3) 4 in. bore x 36 in. stroke

(102 mm x 914 mm)

Max. Thrust: 600,000 lbs. (272 tonnes)Hydraulic Thrust Cylinder: (2) 9 in. bore x 35 in. stroke (229 mm x 889 mm)

M H

Master Pusher

Diameter: 24 in. (610 mm)Working Range: 8 in. - 30 in.

(203 mm - 762 mm)Hex Drive: 3 in. (76.2 mm)

Diameter: 36 in. (914 mm)Working Range: 12 in. - 42 in.

(305 mm - 1,067 mm)Hex Drive: 4 in. (102 mm)

D W

H

Misc.

Extension Track: (2)Master Saddle: (1) 24 in. (610 mm)

compatible

Work Lights: (3) 12 VoltExtension Track: (2)Master Saddle: (1) 36 in. (914 mm) compatible

W EM

48/54-900 60-1200 72-1200 84/96-1800

Engine: Deutz TCD914LO6 Tier III DieselRating: 174 HP (130 kW)Max. Engine Speed: 2,300 RPMEngine Torque: 373 ft. lbs. (505.7 Nm) 2,300 RPM 468 ft. lbs. (634.5 Nm) 1,600 RPMFuel Capacity: 39 U.S. Gallons (148 L)Hydraulic Capacity: 22 U.S. Gallons (83 L)

Engine: Caterpillar C-7 ACERT Tier

III DieselRating: 250 HP (186 kW)Max. Engine Speed: 2,100 RPMEngine Torque: 625 ft. lbs. (847.4 Nm)

2,100 RPM 625 ft. lbs. (847.4 Nm)

1,600 RPMFuel Capacity: 58 U.S. Gallons (219 L)Hydraulic Capacity: 48 U.S. Gallons (181 L)

Engine: Caterpillar C-7 ACERT Tier

III DieselRating: 300 HP (223 kW)Max. Engine Speed: 2,100 RPMEngine Torque: 838 ft. lbs. (1,136 Nm)

2,100 RPM 814 ft. lbs. (1,103 Nm)

1,137 RPMFuel Capacity: 87 U.S. Gallons (329 L)Hydraulic Capacity: 90 U.S. Gallons (340 L)

gle disk / hydraulically assisted clutch actuator

Type: Eaton FS-6406 6-SpeedClutch: Dual plate, spring applied

with 14 in. (356 mm) diameter twin disk / hydraulically assisted clutch actuator

Type: Eaton FRO11210C 10-SpeedClutch: Dual plate, spring applied

with 14 in. (356 mm) diameter twin disk / hydraulically assisted clutch actuator

Ratio: 38.8:1 Ratio: 35.63:1 Ratio: 25.6:1

Max. Thrust: 900,000 lbs. (408 tonnes)Hydraulic Thrust Cylinder: (3) 9 in. bore x 35 in. stroke

(229 mm x 889 mm)

Max. Thrust: 1,200,000 lbs. (544 tonnes)Hydraulic Thrust Cylinder: (4) 9 in. bore x 35 in. stroke

(229 mm x 889 mm)

Max. Thrust: 1,200,000 lbs. (544 tonnes)Hydraulic Thrust Cylinder: (4) 9 in. bore x 35 in. stroke

(229 mm x 889 mm)

Max. Thrust: 1,800,000 lbs. (816 tonnes)Hydraulic Thrust Cylinder: (4) 12 in. bore x 35 in.

stroke (305 mm x 889 mm)

Diameter: 48 in. (1,219 mm)Working Range: 24 in. - 54 in.

(610 mm - 1,372 mm)Hex Drive: 4 in. (102 mm)

Diameter: 60 in. (1,524 mm)Working Range: 24 in. - 60 in.

(610 mm - 1,524 mm)Hex Drive: 5 in. (127 mm)

Diameter: 72 in. (1,829 mm)Working Range: 24 in. - 72 in.

(610 mm - 1,829 mm)Hex Drive: 5 in. (127 mm)

Diameter: 84 in. (2,134 mm)Working Range: 24 in. - 96 in.

(610 mm - 2,439 mm)Hex Drive: 6 in. (152.4 mm)

Work Lights: (3) 12 VoltExtension Track: (2)Master Saddle: (1) 48 in. (1,219 mm)

compatible

Work Lights: (3) 12 VoltExtension Track: (2)Master Saddle: (1) 60 in. (1,524 mm)

compatible

Work Lights: (3) 24 VoltExtension Track: (2)Master Saddle: (1) 72 in. (1,829 mm)

compatible

Work Lights: (3) 24 VoltExtension Track: (3)Master Saddle: (1) 96 in. (2,134 mm)

compatible

AUGER BORING MACHINES PERFORMANCE SPECIFICATIONS

Dimensions 24/30-150 36-600 42/48-600

Length 11 ft. 4 in. (3.43 m) 12 ft. 6 in. (3.81 m) 1

Width 3 ft. (0.91 m) 5 ft. 7 in. (1.69 m) 5

Height 4 ft. 7 in. (1.40 m) 5 ft. 9 in. (1.75 m) 6

Master Track Length

11 ft. (3.4 m) with1 in. (25 mm) back plate

13 ft. (3.96 m) with 1 in. (25 mm) back plate11

Master Track Width

4 ft. 6 in. (1.37 m) 6 ft. 3 in. (1.92 m) 5

Center l ine 18.12 in. (460 mm) 29.27 in. (744 mm) 3

Extension Track Length

10 ft. (3 m) 10 ft. (3 m) 1

Extension Track Width

4 ft. 6 in. (1.37 m) 6 ft. 3 in. (1.92 m) 5

Weight

Base Unit (Spl i t Weight)

Base Unit /Power Pack:4,050 lbs. (1,837 kg)

5,100 lbs. (2,313 kg) 6

Power Pack(Spl i t Weight)

6,800 lbs. (3,084 kg) 7

Master Pusher 450 lbs. (204 kg) 1,100 lbs. (499 kg) 1

Master Track 1,300 lbs. (590 kg) 3,500 lbs. (1,587 kg) 3

Lif t ing Sl ing 140 lbs. (63.5 kg) 300 lbs. (136 kg) 3

TOTAL WEIGHT 5,940 lbs. (2,694 kg) 16,800 lbs. (7,620 kg) 17,400 lbs. (7,893 kg) 1

Extension Track 1,060 lbs. (481 kg) 2,360 lbs. (1,070 kg) 3

Master Saddle 60 lbs. (27 kg) 105 lbs. (48 kg) 115 lbs. (52 kg) 1

48/54-900 60-1200 72-1200 84/96-1800

14 ft. 6 in. (4.42 m) 14 ft. 7 in. (4.43 m) 14 ft. 3 in. (4.34 m) 17 ft. (5.18 m)

5 ft. 9 in. (1.75 m) 7 ft. 1 in. (2.16 m) 8 ft. 6 in. (2.59 m) 8 ft. 8 in. (2.64 m)

6 ft. 2 in. (1.89 m) 7 ft. 5 in. (2.27 m) 8 ft. 3 in. (2.51 m) 9 ft. 4 in. (2.84 m)

15 ft. (4.57 m) with1 in. (25 mm) back plate

15 ft. (4.57 m) with1.5 in. (38 mm) back plate

15 ft. (4.57 m) with1.5 in. (38 mm) back plate

Two section assemblyTotal Assembly:16 ft. (4.87 m)• (1) 8 ft. (2.43 m) section with

1.5 in. (38 mm) back plate• (1) 8 ft. (2.43 m) section

5 ft. 6 in. (1.67 m) 7 ft. 4 in. (2.23 m) 8 ft. (2.43 m) 10 ft. (3 m)

32.89 in. (835.4 mm) 36.02 in. (915 mm) 43.47 in. (1,104 mm) 54.37 in. (1,381 mm)

10 ft. (3 m) 10 ft. (3 m) 10 ft. (3 m) 8 ft. (2.43 m)

5 ft. 6 in. (1.67 m) 7 ft. 4 in. (2.23 m) 8 ft. (2.43 m) 10 ft. (3 m)

6,150 lbs. (2,790 kg) 8,900 lbs. (4,037 kg) 12,000 lbs. (5,443 kg) 13,800 lbs. (6,260 kg)

7,200 lbs. (3,266 kg) 8,600 lbs. (3,901 kg) 14,000 lbs. (6,350 kg) 21,000 lbs. (9,525 kg)

1,600 lbs. (726 kg) 2,390 lbs. (1,084 kg) 2,500 lbs. (1,134 kg) 4,850 lbs. (2,200 kg)

3,900 lbs. (1,769 kg) 7,100 lbs. (3,221 kg) 7,700 lbs. (3,493 kg)

Front Master Track:5,900 lbs. (2,676 kg)Rear Master Track:7,500 lbs. (3,402 kg)

350 lbs. (159 kg) 550 lbs. (249 kg) 700 lbs. (318 kg) 900 lbs. (408 kg)

19,200 lbs. (8,709 kg) 27,540 lbs. (12,492 kg) 36,900 lbs. (16,740 kg) 53,950 lbs. (24,470 kg)

3,500 lbs. (1,588 kg) 5,600 lbs. (2,540 kg) 6,200 lbs. (2,812 kg) (3) 6,000 lbs. (2,722 kg) each

120 lbs. (54 kg) 135 lbs. (61 kg) 150 lbs. (68 kg) 600 lbs. (272 kg)

The American Augers line of underground construction equipment is second-to-none. • Auger Boring Machines • Maxi-Rig & Mid-Size Directional Drills • Oil & Gas Drilling Rigs • Mud Pump & Cleaning Systems • Product Tooling & Accessories

American Augers products are manufactured at the company’s 241,000 square-foot facility in West Salem, Ohio, in the heart of Amish country between Columbus and Cleveland.

Since the founding of American Augers in 1970, there has never been a change in the company’s core value: having products developed by a can-do work force that focuses on mechanical, technological and customer-based design improvements. Our goal is to always exceed customer expectations by providing products that are not a cost of doing business, but an Investment in Success.

Did You Know? American Augers was the fi rst HDD manufacturer to eliminate chain and utilize a rack and pinion carriage design which is now the industry standard. Our rack and pinion drive provides smoother carriage movement, more precise operating control, long system life and no complicated parts.

American Augers machines are supported through a dedicated parts and technical service department. We are here to help whenever you need us 24 hours a day, 7 days a week, emergency or not.

www.AmericanAugers.comEnvironmental CommitmentAmerican Augers is committed to manufacturing equipment that helps to preserve the sanctity of the global environment, and has done so by reducing noise and/or emissions outputs, and emphasizing the fact that our trenchless technology equipment requires little or no open cutting, which has very minimal impacts on natural surfaces, features, or habitats.

Casing/Diameter Size Head Diameter Hex Size # of Cutters Required Torque Required Thrust Total Weight

24 in. (610 mm) 26 in. (660 mm) 4 in. (102 mm) 97,800 ft. lbs. (10,580 Nm)

94,995 lbs. (43 Tonnes)

2,225 lbs. (1,009 kg)

30 in. (762 mm) 32 in. (813 mm) 4 in. (102 mm) 1111,900 ft. lbs.(16,130 Nm)

116,105 lbs.(53 Tonnes)

3,066 lbs. (1,391 kg)

36 in. (914 mm) 38 in. (965 mm) 4 in. (102 mm) 1316,900 ft. lbs.(22,910 Nm)

137,215 lbs.(63 Tonnes)

4,100 lbs. (1,860 kg)

42 in. (1,067 mm) 44 in. (1,118 mm) 5 in. (127 mm) 1625,800 ft. lbs.(34,980 Nm)

168,880 lbs.(77 Tonnes)

4,862 lbs. (2,205 kg)

* Note: All product performance specifi cations, components, weights, dimensions and other related information is subject to change without notice from the manufacturer.

Disc Cutter Head

Retractable, Large Diameter Cutter Head with Increased Access

Power Assisted Steering Jacks let the operator make steering corrections with ease and precision.

Retractable Steering Assembly gives better access to service the cutter head.

Spoil Removal. Greater area for quick removal and passage of spoils from the face: cutters do not roll over in spoils.

Hex Adapter adapts to any size or brand of auger boring machine with a 4 in. (102 mm) or 5 in. (127 mm) hex.

The American Augers Disc Cutter Head offers auger boring contractors the latest in fi eld-proven technology to succeed in hard rock or other intrusive ground conditions up to 25,000 psi (1,724 bar).

1112