AUCTION SALE - nationalmachy.com · ED-C-4 De-Scaler View of Die-Quip Die Polishers Balloffet Mdl....

Featuring: Sirio/M&E 24-Strand Annealing Line 2003 • Koch Wire Drawing Lines (new as 2001-2005) with

Spoolers, Dead Blocks • Bull Blocks • Inverted Vertical Bull Blocks • Wire Straighteners & Cut-Offs • Bell Furnaces • De-Scalers • Large Quantity of Wire Drawer Dies • Lab

Equipment & Tensile Testers • Plus Much More!!

AUCTION SALE

AUCTIONEERS • LIQUIDATORS • APPRAISERS555 Broadhollow Road, Melville, New York 11747(631) 454-1766 • Fax (631) 454-1779

AXP/9050300

With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world! To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com

IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: A 13% buyer’s premium will apply. A minimum deposit of 25% on all lots purchased is required at the time of sale. All checks for deposits and balances due shall be payable to the order of KOSTER INDUSTRIES INC. All bills must be paid to representatives of the auctioneer at the plant unless otherwise announced. The full purchase price on all lots to the same buyer must be paid within the time fixed and before removal of any of the goods. Payments are accepted in the form of cash, cashiers check made payable to KOSTER INDUSTRIES INC., wire transfer, or business check accompanied by an approved bank letter of guarantee payable to KOSTER INDUSTRIES INC.

IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale.

PresortedFirst-Class Mail

U.S. PostageP a i D

Minneapolis, MNPermit #3723

DIrECTIONS:newark Liberty international airport: Take U.S.-9/U.S.-1 ramp towards Rte. 21 – take Haynes Ave. exit and proceed to Meeker Ave. and make right turn – go about ½ mile to Elizabeth Ave. and turn left – this will turn into N. Broad Street, N. Broad will go to left, stay on N. Broad – proceed to Central Ave. and turn right – about 20 minutes travel time.

JFK international: Take Belt Pkway. towards I-768/Van Wyck Expway. – Stay on Belt Pkway. west towards Verrazano Bridge – take Exit 3 off Belt Pkway. and go over the Verrazano Bridge into Staten Island – continue thru Staten Island on I-278 – take the Goethals Bridge into NJ and then take I-95N after paying toll – proceed to exit 13A and merge onto NJ-81N towards U.S. 1&9 toward Elizabeth/Trenton – go about ½ mile and turn right on North Ave. – go about 1 mile and then turn right on N. Broad Street – go about 1 mile and turn left on Central Ave. – go about ½ mile to plant.

Laguardia international airport: Take Grand Central Pkway. East for about 5 miles and take I-678S/Van Wyck Expway. – proceed to exit 1W (Belt Pkway.) west towards Verrazano Bridge/Staten Island – take Belt Pkway. to Exit #3 and then follow directions from above.

HOTELSHilton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .908 351 3900Sheraton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .973 690 5500Hampton Inn Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .908 355 0500

Branch Office:Boston, Massachusetts

(978) 474-4442 • Fax: (978) 474-4673

Corporate Office:555 Broadhollow Road, Melville, NY 11747

(631) 454-1766 • Fax: (631) 454-1779

WIRE PROCESSING FACILITY

sale Date: thursDay, June 25th, 2009 at 10:30 a.m.Inspection Dates: Wednesday, June 24th, 2009 from 8:00 a.m. to 4:00 p.m. and morning of sale

for Carbon, alloy and stainless steel Wire

Koch KGT 1600/2-1000/5 Wire Drawer Line Koch KGT 25/5 Wire Drawer Line

1 of 3

1 of 21992

Vaughn 6/7HR Wire Drawers

EIWA Mdl. EK-610 Dead Blocks Lewis Mdl. 8-F Wire Straightener & Cut-Off

AUCTION SALEWIRE PROCESSING FACILITY

enco Mdl. 137-3178 Horizontal Bandsaw, S/N: 470178

Miscellaneous in Machine Shop: Lincoln Idealarc CV-300 Welder with LN-7 Wire Feed; L-Tec Plasmarc PCM-70 Plasma Cutter; Miller 330A/BP Welder; Long 12" Disc & 6" Belt Sander; Tool Boxes, Welding Supplies, Vises, Nuts & Bolts, Power Tools, Drills, Taps, Electrical Parts, Etc.

FILTEr PrESS & WATEr TrEATMENTDuriron 31-Plate Filter Press, with32" x 32" Square Plates, Clarifier System & Agitators

BOILErKewanee Mdl. L3S-300gO 300HP gas Fired Boiler, MWP 15-psig

MISCELLANEOUS MACHINErYFume Scrubber System, with Hoods, Pump, Controls, Etc.

[3] Shaw Box “Lif-tech” 2 ton electric Hoists, Mounted on Jibs

[2] Shaw Box 2 ton 360 Degree Floor Mounted Jib Cranes

assorted Carbon Steel Dip tanks

ribbon Blender, 5HP Motor, 48" Long x 24" Wide x 22" Deep, with Bottom Discharge

Marley “Primus” Cooling tower, with Frick Evaporative Heat Transfer Unit

AIr COMPrESSOrS100HP ingersoll rand Mdl. SSr-eP100 rotary Screw type air Compressor, 445-cfm, S/N: F15007095212

100HP Sullair Mdl. 20-100L rotary Screw type air Compressor, S/N: 003-61846

[2] 30HP Sullair Mdl. 10-30L rotary Screw type air Compressors, S/Ns: 9578-NLF; 29083-TGF

FOrKLIFTS & MANLIFTeagle Mdl. 32/21Jr 500# Capacity Snorkel Lift, S/N: 13267

5400# Hyster Mdl. S60XL2 Propane Forklift, with 182" Reach, Forks, Hard Tires, S/N: C187V161295

5800# Hyster Mdl. H60XM Propane Lift, with Pole Coil Attachment, 181" Reach, Hard Tires, S/N: H177B52805B

3500# Hyster Mdl. H60XL Propane Forklift, with Forks, 187" Reach, Hard Tires, S/N: C177B05186N

MISCELLANEOUS THrOUGHOUT PLANTEnormous Quantity of Heavy Duty Hi-Hats, Strapping Machines, Fans, Self Dumping Scrap Hoppers, Portable Wire Shears, Bench Grinders, Pallet Jacks, Storage Cabinets, Welding Equipment, Benches, Large Quantity of Valves, [2] Club Car Electric Cars (as is), Assorted Digital Platform Scales, Pumps & Motors, Assorted Electrical Boxes & Control Cabinets, Assorted 4' x 10' (Approx.) Flat Plate Heat Exchangers, Etc.

OFFICESWood Executive Desks & Credenzas, File Cabinets, HP C5280 Printer, Flat Screen Monitors, Conference Room, Office Partitioning, Datamax Labelers, HP Laserjet M1522NF Printer, Cloth Wood Chairs, Xerox Work Centre M15I, Refrigerator, Kitchen Table & Chairs, Folding Tables, Displays, HP Officejet Pro L7580, Secretarial Chairs, High Back Office Chairs, Etc.

PICKUP TrUCK1988 gMC

M&E Vertical Spooler EIWA Mdl. ED-C-4 De-Scaler

View of Die-Quip Die Polishers Tinius Olsen Tensile Tester Duriron Filter Press with 31 PlatesBalloffet Mdl. BA-130 Ultrasonic Polisher

View of 4-Way PointersHakusan Mdl. BS-5T Heated Pressure Welder

1991 1996

LAB & QUALITY CONTrOLtinius Olsen tensile tester, with Dell computer

[2] tinius Olsen 60K tensile testers

Zumbach type ODaC30.80 OD inspection unit, S/N: 7396-0003

Shimadzu type H Micro Hardness tester, S/N: 82592

Buehler Versamat 3 Metallograph & Scope

Mettler Mdl. aK160 Digital Scale

rockwell Wilson Mdl. 4Jr-arB Hardness tester, S/N: 8360

Laser Mike 183 OD tester

Leco Mdl. VP-160/HP-60 Lapper/Polisher

Buehler Surfmet i Belt Surfacer

Buehler Pneumet i Mounting Press

Leco Mdl. CM-15 Cut-Off Machine

View of Lab & Inspection

Large Quantity of alloy and Stainless Steel Wire

Lewis Mdl. 11-F Wire Straightener & Cut-Off

Large Quantity of Alloy

and Stainless Steel Wire

Can’t attend the auction? Bid Online at www.bidspotter.com

171 Central Avenue Hillside, New Jersey 07205 USAUnited States Bankruptcy Court District of New JerseyCase No: 09-11467 (MS)

Partial Views of 2003 Sirio/M&E Annealing Line

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

WIrE DE-SCALErSeiWa Mdl. eD-CB-9 Wire De-Scaler, S/N: 101208 (1991)

[5] eiWa Mdl. eD-CB-8 Wire De-Scalers, S/Ns: 10130 (1984); 10129 (1984); 101121 (1983); 101127 (1984); N/A

eiWa Mdl. eD-CB Wire De-Scaler, S/N: 101176 (1990)

eiWa Mdl. eD-C-4 Wire De-Scaler, S/N: 101205 (1991)

WIrE BUTT WELDErS• Strecker Wire Butt Welder, S/N: 30876• Ideal Mdl. DS8 Wire Butt Welder• Micro-Products Mdl. J5S & #1 Wire Butt

Welder

• Hakusan Mdl. BS-5T Heated Pressure Welder, 7mm, S/N: 9536 (1996)

• Plus Many Others

POINTErSVaughn 4-roll Pointer, with [8] Horizontal Positions, [6] Vertical Positions

Vaughn 4-roll Pointer, with [12] Horizontal Positions, [12] Vertical Positions

[5] Vaughn 2-roll Pointer, with 10-Position, S/Ns: 7603; 7525; 7524; N/A; N/A

Herborn Mdl. aSiii Wire Pointer, S/N: 65/41543

DIE MAINTENANCEDie-Quip Die Polisher Mdl. DQ-Bg, S/N: 105BG

Die-Quip Die Polisher Mdl. DQ-Pg2, S/N: 172PG2-1

[2] roos Mdl. Ot, S/Ns: S174; 8377

[2] Vertical iD Die Finishers, Oscillating

Ballofet Mdl. Ba-130 ultrasonic Cleaner (2004)

AUTOMATED CrANEKeramchemie automation Coil Crane for Dip Line, with Approximately 300' Runway, Impulse VG Series Flux Crane Controls, ICS Infrared Range Finder (with Spare), Impulse GT Adjustable Frequency Control Drive, Etc.

also available: [8] Iconel Hooks (for Coil)

MACHINE SHOPenco 2HP Vertical Mill, with R-8 Spindle, 9" x 42" Table, Pulley Head

16" x 24" enco Mdl. 111-3300 Lathe, with inch/mm Threading, 2000 rpm, Camloc Spindle

16" Doall Vertical Bandsaw, with Welder/Grinder

Bridgeport 1HP Vertical Mill, S/N: 12BR230157

Doall 6" x 18" Surface grinder

16" x 36" Southbend Lathe, with Taper Attachment, CAT #CL8117D

WIrE DrAWING LINEKoch Wire Drawing “tunerline” #1, consisting of:• Koch Hydraulic Tilt-Up Booms & Double Payoff,

6000# Capacity• Koch Mdl. KGT1600/2 1000/5, 7-Block Wire Drawer,

[7] 50HP Motors, Vari-Speed, Siemens Drive & Controls, PLC, 2300fpm, Dust Collection System, S/N: 15986 (2001)

• Koch Dead Block, Mdl. KEWS42, with Drawing Die, S/N 19587 (2001)

• Koch KVS1000 High Speed Spooler, 22"-24", with 32" Max OD, 7mm Regular Wire, 50HP Drive, S/N: 18026 (2005)

WIrE DrAWING LINEKoch Wire Drawing “tunerline” #2, consisting of:• Koch Hydraulic Tilt-Up Booms & Double Payoff, 6000# Capacity• Koch Mdl. KGT25/5, 5-Block Wire Drawer, [5] 50HP Motors, 22" Blocks, 26" Blocks, Siemens Drives & Controls, PLC, 2000fpm Dust

Collection System, S/N: 17535 (2004)• Koch Dead Block, Mdl. KEWS-IV-2, with Drawing Die, S/N 17536 (2004)

WIrE DrAWING LINES[3] Vaughn Mdl. 6/7Hr 5-Block Wire Drawing Lines, 20" Diameter Blocks,[5] 60HP DC Motors

BULL BLOCKSVaughn Mdl. 12-22 Bull Block, with 28" Diameter, 125HP Drive, S/N: 9428, with Control Technique DC Motor Drive• EIWA Coating Unit, S/N: 101129 (1984)• Lepel Mdl. LSP200 Induction Heater

Vaughn “Motoblox” Bull Block, Size 13, Single Deck, 60HP Motor, 10' Arm Payoff, Solid State Controls, S/N: 5843

Miyazaki Horizontal Bull Block, 75kW AC Drive, 36" Diameter Block, Inground Recoiler 72" Max. Coil Diameter, De-Scaler

Herborn 2-Die Bull Block, 30" Block, Spare Drive, 90HP Motor

eiWa Mdl. eD-650 Bull Block, 75HP Motor, 28" Diameter Block (1984)

[4] Herborn Bull Blocks, 20" Diameter Blocks, 30HP Motor, AC Motor Drives

INVErTED WIrE DrAWErSeiWa Mdl. eg-7 3-Block inverted Wire Drawer, with Dancer Rolls, Vari-Speed, Line Speed Motor, Pre-Set Counter, S/N: 17057 (1994)

eiWa Mdl. eg-5 3-Block inverted Wire Drawer, with Dancer Rolls, Line Pre-Set Counters, Vari-Speed, S/N: 17045 (1990)

eiWa Mdl. eg-5 2-Block inverted Wire Drawer, with Push Button Controls, S/N: 070011 (1985)

eiWa Mdl. eg-15 inverted Wire Drawer, with Shaving Head, Payoff with Snag Control, S/N: 17016

[2] Miyazaki Seiko inverted Wire Drawers, with Vari-Speed, Digital Counter, Tram Car, Hoists, Payoffs with Snag Control

WIrE STrAIGHTENErS & CUT-OFFSLewis Mdl. 11-F Wire Straightener & Cut-Off, with 20' Run-Out,S/N: 1139

Lewis Mdl. 8-F Wire Straightener & Cut-Off, with 21' Run-Out,S/N: 166

[4] Lewis Mdl. 4-F Wire Straightener & Cut-Off, [4] with13' Run-Outs, S/Ns: 262; [5] @ N/A

[2] Lewis Mdl. 3-F Wire Straightener & Cut-Off, [1] with 3-1/2' Run-Out, [1] with 13' Run-Out, S/Ns: 225; 194

Shuster Mdl. 1aVS5 Wire Straightener & Cut-Off, S/N: 335

Shuster Mdl. 1aVS3 Wire Straightener & Cut-Off, with13' Run-Out, S/N: 181-61

DEAD BLOCKSernst Koch Mdl. KeWS4Z Dead Block, with PLC Control, S/N: 15987 (2001) (LINE 1)

ernst Koch MDl. KeWS-iV-Z Dead Block, with PLC Control, S/N: 17536 (2004) (LINE 2)

[2] eiWa Mdl. eK-610 Dead Blocks, S/Ns: 061215 (1992); 061186

BELL ANNEALING FUrNACES[2] rad-Con Bell annealing Furnaces,10' Diameter x 8' Tall, Pit Mounted, Gas Fired, Lee Wilson Instrument Panels, Leeds & Northrup Controls, Each Unit Equipped with 2 Bases

[2] Lee Wilson Bell annealing Furnaces, 6' Diameter x 8' Tall, Pit Mounted, Gas Fired, Lee Wilson Instrument Panels, Leeds & Northrup Controls, Each Unit Equipped with 2 Bases

Can’t attend the auction? Bid Online at

www.bidspotter.com

View of 2001 Koch KGT 1600/2-1000/5 Wire Drawer Lines

View of 2004 Koch KGT 25/5 Wire Drawer Line

EIWA Mdl. EG-5 Inverted Wire Drawer

EIWA Mdl. ED-650 Bull Block

View of Shuster 1AVS5 & Lewis 3F Wire Straighteners & Cut-Offs

View of Vaughn HPJ4 98" Bull Blocks & Induction Heater, Coating Unit

SIrIO/M&E STrAND ANNEALING LINE (New 2003)• 24-Position Floor Mounted Pay-Off Sections, 4000#

Capacity Spools• Sirio Electrolytic Cleaning Unit & Ultrasonic Cleaner, with

Giussani 4000 CCDC Rectifier, S/N: 0307R02• [1] 24-Tube North American 4-Zone Furnaces, with Digital

Controls, PLC, Gas Fired• Cooling Tank• M&E 24-Position Inverted Take-Up with Individual

Vari-Speed Drives, Each Position with Draw Die• Idroenergy Hydrogen Generator

View of 2003 Annealing Line

BELL ANNEALING FUrNACErad-Con Bell annealing Furnace, 132" Diameter x 10' Tall, with [19] Side Mounted Jets, Gas Fired, [2] Bases, Pit Mounted, Controls (Rebuilt 2004)

View of Bell Furnaces

View of Miyazakisieko Inverted Wire Drawers

Ernst Koch Mdl. KEWS4Z Dead Block

SPOOLErSM&e Vertical Spooler, with Solid State Controls, 28kW Motor(New 2004)

Horizontal Spooler, 24" Diameter, with 2-Plane Inline Straightener, Vari-Speed, Fincon Adjustable Speed Drive

Partial View of Large Quantity of Carbide & Diamond Wire Drawer Dies

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

Welder

[2] roos Mdl. Ot, S/Ns: S174; 8377

www.bidspotter.com

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

Welder

[2] roos Mdl. Ot, S/Ns: S174; 8377

www.bidspotter.com

AUCTION SALE

AXP/9050300

U.S. PostageP a i D

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

1 of 3

1 of 21992

1991 1996

AUCTION SALE

AXP/9050300

U.S. PostageP a i D

(978) 474-4442 • Fax: (978) 474-4673

(631) 454-1766 • Fax: (631) 454-1779

1 of 3

1 of 21992

1991 1996

AUCTION SALE - nationalmachy.com · ED-C-4 De-Scaler View of Die-Quip Die Polishers Balloffet Mdl....

Documents

Transcript of AUCTION SALE - nationalmachy.com · ED-C-4 De-Scaler View of Die-Quip Die Polishers Balloffet Mdl....